aboutsummaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
authorSimon Glass <sjg@chromium.org>2017-07-23 21:19:47 -0600
committerTom Rini <trini@konsulko.com>2017-07-25 21:34:15 -0400
commitb31e065f8999d2dc70f3deb430c9b66a5d0d02ea (patch)
tree371afa81d57c104e7e6f2ba87468f613f9d6461f /README
parent337cd3f211223719a173a89e4527475ac22e8a01 (diff)
downloadu-boot-b31e065f8999d2dc70f3deb430c9b66a5d0d02ea.zip
u-boot-b31e065f8999d2dc70f3deb430c9b66a5d0d02ea.tar.gz
u-boot-b31e065f8999d2dc70f3deb430c9b66a5d0d02ea.tar.bz2
Convert CONFIG_ENV_IS_IN_FAT to Kconfig
This converts the following to Kconfig: CONFIG_ENV_IS_IN_FAT Signed-off-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'README')
-rw-r--r--README44
1 files changed, 0 insertions, 44 deletions
diff --git a/README b/README
index 4cb32f1..1527dee 100644
--- a/README
+++ b/README
@@ -3422,19 +3422,6 @@ environment in RAM: we could work on NVRAM directly, but we want to
keep settings there always unmodified except somebody uses "saveenv"
to save the current settings.
-- CONFIG_ENV_IS_IN_REMOTE:
-
- Define this if you have a remote memory space which you
- want to use for the local device's environment.
-
- - CONFIG_ENV_ADDR:
- - CONFIG_ENV_SIZE:
-
- These two #defines specify the address and size of the
- environment area within the remote memory space. The
- local device can get the environment from remote memory
- space by SRIO or PCIE links.
-
BE CAREFUL! For some special cases, the local device can not use
"saveenv" command. For example, the local device will get the
environment stored in a remote NOR flash by SRIO or PCIE link,
@@ -3446,37 +3433,6 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface.
environment. If redundant environment is used, it will be copied to
CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE.
-- CONFIG_ENV_IS_IN_FAT:
- Define this if you want to use the FAT file system for the environment.
-
- - FAT_ENV_INTERFACE:
-
- Define this to a string that is the name of the block device.
-
- - FAT_ENV_DEVICE_AND_PART:
-
- Define this to a string to specify the partition of the device. It can
- be as following:
-
- "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1)
- - "D:P": device D partition P. Error occurs if device D has no
- partition table.
- - "D:0": device D.
- - "D" or "D:": device D partition 1 if device D has partition
- table, or the whole device D if has no partition
- table.
- - "D:auto": first partition in device D with bootable flag set.
- If none, first valid partition in device D. If no
- partition table then means device D.
-
- - FAT_ENV_FILE:
-
- It's a string of the FAT file name. This file use to store the
- environment.
-
- - CONFIG_FAT_WRITE:
- This must be enabled. Otherwise it cannot save the environment file.
-
Please note that the environment is read-only until the monitor
has been relocated to RAM and a RAM copy of the environment has been
created; also, when using EEPROM you will have to use getenv_f()