diff options
author | Tom Rini <trini@konsulko.com> | 2020-07-11 11:50:49 -0400 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2020-07-11 11:50:49 -0400 |
commit | 610e1487c8921d266f5cb304bfb66eb71f1dc7dc (patch) | |
tree | 68991565dbed957030795ef3229020e1207709d3 | |
parent | 4a9146c29573dbfa661918280d9522a01f6ca919 (diff) | |
parent | 5785950369cd68d4409bf4d0e34d4b1894e5d0e9 (diff) | |
download | u-boot-610e1487c8921d266f5cb304bfb66eb71f1dc7dc.zip u-boot-610e1487c8921d266f5cb304bfb66eb71f1dc7dc.tar.gz u-boot-610e1487c8921d266f5cb304bfb66eb71f1dc7dc.tar.bz2 |
Merge tag 'uniphier-v2020.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier
UniPhier SoC updates for v2020.10
- remove workaround for Cortex-A72
- increase U-Boot proper size to 2MB
- sync DT with Linux
- add system bus controller driver
- improve serial driver
- add reset assertion to Denali NAND driver
47 files changed, 432 insertions, 593 deletions
diff --git a/arch/arm/dts/uniphier-ld11-global.dts b/arch/arm/dts/uniphier-ld11-global.dts index 7968d52..670e1a7 100644 --- a/arch/arm/dts/uniphier-ld11-global.dts +++ b/arch/arm/dts/uniphier-ld11-global.dts @@ -30,6 +30,7 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/dts/uniphier-ld11-ref.dts b/arch/arm/dts/uniphier-ld11-ref.dts index b8f6273..693171f 100644 --- a/arch/arm/dts/uniphier-ld11-ref.dts +++ b/arch/arm/dts/uniphier-ld11-ref.dts @@ -29,6 +29,7 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/dts/uniphier-ld11.dtsi b/arch/arm/dts/uniphier-ld11.dtsi index e0737ac..104d56d 100644 --- a/arch/arm/dts/uniphier-ld11.dtsi +++ b/arch/arm/dts/uniphier-ld11.dtsi @@ -129,6 +129,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; @@ -140,11 +142,13 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006100 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 12>; + resets = <&peri_rst 12>; }; serial0: serial@54006800 { @@ -566,6 +570,14 @@ }; }; + xdmac: dma-controller@5fc10000 { + compatible = "socionext,uniphier-xdmac"; + reg = <0x5fc10000 0x5300>; + interrupts = <0 188 4>; + dma-channels = <16>; + #dma-cells = <2>; + }; + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-ld11-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/dts/uniphier-ld20-global.dts b/arch/arm/dts/uniphier-ld20-global.dts index 9ca692e..2c00008 100644 --- a/arch/arm/dts/uniphier-ld20-global.dts +++ b/arch/arm/dts/uniphier-ld20-global.dts @@ -30,6 +30,7 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/dts/uniphier-ld20-ref.dts b/arch/arm/dts/uniphier-ld20-ref.dts index 406244a..eeb976e 100644 --- a/arch/arm/dts/uniphier-ld20-ref.dts +++ b/arch/arm/dts/uniphier-ld20-ref.dts @@ -29,6 +29,7 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/dts/uniphier-ld20.dtsi b/arch/arm/dts/uniphier-ld20.dtsi index 59e4191..a5cd026 100644 --- a/arch/arm/dts/uniphier-ld20.dtsi +++ b/arch/arm/dts/uniphier-ld20.dtsi @@ -234,6 +234,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; @@ -245,33 +247,39 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006100 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 12>; + resets = <&peri_rst 12>; }; spi2: spi@54006200 { compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006200 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 229 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 13>; + resets = <&peri_rst 13>; }; spi3: spi@54006300 { compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006300 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 230 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi3>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 14>; + resets = <&peri_rst 14>; }; serial0: serial@54006800 { @@ -664,6 +672,14 @@ }; }; + xdmac: dma-controller@5fc10000 { + compatible = "socionext,uniphier-xdmac"; + reg = <0x5fc10000 0x5300>; + interrupts = <0 188 4>; + dma-channels = <16>; + #dma-cells = <2>; + }; + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-ld20-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/dts/uniphier-ld4.dtsi b/arch/arm/dts/uniphier-ld4.dtsi index 1eebc7f..897162d 100644 --- a/arch/arm/dts/uniphier-ld4.dtsi +++ b/arch/arm/dts/uniphier-ld4.dtsi @@ -67,6 +67,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; diff --git a/arch/arm/dts/uniphier-ld6b-ref.dts b/arch/arm/dts/uniphier-ld6b-ref.dts index 3d9080e..f1a3b29 100644 --- a/arch/arm/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/dts/uniphier-ld6b-ref.dts @@ -29,6 +29,7 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/dts/uniphier-pro4-ace.dts b/arch/arm/dts/uniphier-pro4-ace.dts index 92cc48d..64246fa 100644 --- a/arch/arm/dts/uniphier-pro4-ace.dts +++ b/arch/arm/dts/uniphier-pro4-ace.dts @@ -26,6 +26,7 @@ i2c3 = &i2c3; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/dts/uniphier-pro4-ref.dts b/arch/arm/dts/uniphier-pro4-ref.dts index 06065eb..4967db5 100644 --- a/arch/arm/dts/uniphier-pro4-ref.dts +++ b/arch/arm/dts/uniphier-pro4-ref.dts @@ -30,6 +30,7 @@ i2c5 = &i2c5; i2c6 = &i2c6; usb0 = &usb0; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/dts/uniphier-pro4.dtsi b/arch/arm/dts/uniphier-pro4.dtsi index d006b45..9dae4e9 100644 --- a/arch/arm/dts/uniphier-pro4.dtsi +++ b/arch/arm/dts/uniphier-pro4.dtsi @@ -75,6 +75,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; @@ -426,6 +428,14 @@ }; }; + xdmac: dma-controller@5fc10000 { + compatible = "socionext,uniphier-xdmac"; + reg = <0x5fc10000 0x5300>; + interrupts = <0 188 4>; + dma-channels = <16>; + #dma-cells = <2>; + }; + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pro4-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/dts/uniphier-pro5.dtsi b/arch/arm/dts/uniphier-pro5.dtsi index ba7e224..8fc8433 100644 --- a/arch/arm/dts/uniphier-pro5.dtsi +++ b/arch/arm/dts/uniphier-pro5.dtsi @@ -160,6 +160,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; @@ -171,11 +173,13 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006100 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 11>; /* common with spi0 */ + resets = <&peri_rst 12>; }; serial0: serial@54006800 { @@ -408,6 +412,14 @@ }; }; + xdmac: dma-controller@5fc10000 { + compatible = "socionext,uniphier-xdmac"; + reg = <0x5fc10000 0x5300>; + interrupts = <0 188 4>; + dma-channels = <16>; + #dma-cells = <2>; + }; + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pro5-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/dts/uniphier-pxs2-gentil.dts b/arch/arm/dts/uniphier-pxs2-gentil.dts index e27fd4f..8e9ac57 100644 --- a/arch/arm/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/dts/uniphier-pxs2-gentil.dts @@ -26,6 +26,7 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/dts/uniphier-pxs2-vodka.dts b/arch/arm/dts/uniphier-pxs2-vodka.dts index 23fe42b..8eacc7b 100644 --- a/arch/arm/dts/uniphier-pxs2-vodka.dts +++ b/arch/arm/dts/uniphier-pxs2-vodka.dts @@ -24,6 +24,7 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/dts/uniphier-pxs2.dtsi b/arch/arm/dts/uniphier-pxs2.dtsi index 8d968d3..899ff37 100644 --- a/arch/arm/dts/uniphier-pxs2.dtsi +++ b/arch/arm/dts/uniphier-pxs2.dtsi @@ -173,6 +173,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; @@ -184,11 +186,13 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006100 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 12>; + resets = <&peri_rst 12>; }; serial0: serial@54006800 { @@ -508,6 +512,14 @@ }; }; + xdmac: dma-controller@5fc10000 { + compatible = "socionext,uniphier-xdmac"; + reg = <0x5fc10000 0x5300>; + interrupts = <0 188 4>; + dma-channels = <16>; + #dma-cells = <2>; + }; + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pxs2-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/dts/uniphier-pxs3-ref.dts b/arch/arm/dts/uniphier-pxs3-ref.dts index 1965e4d..1dacbf4 100644 --- a/arch/arm/dts/uniphier-pxs3-ref.dts +++ b/arch/arm/dts/uniphier-pxs3-ref.dts @@ -27,6 +27,10 @@ i2c2 = &i2c2; i2c3 = &i2c3; i2c6 = &i2c6; + spi0 = &spi0; + spi1 = &spi1; + ethernet0 = ð0; + ethernet1 = ð1; }; memory@80000000 { @@ -39,6 +43,14 @@ interrupts = <4 8>; }; +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + &serial0 { status = "okay"; }; @@ -116,3 +128,19 @@ &nand { status = "okay"; }; + +&pinctrl_ether_rgmii { + tx { + pins = "RGMII0_TXCLK", "RGMII0_TXD0", "RGMII0_TXD1", + "RGMII0_TXD2", "RGMII0_TXD3", "RGMII0_TXCTL"; + drive-strength = <9>; + }; +}; + +&pinctrl_ether1_rgmii { + tx { + pins = "RGMII1_TXCLK", "RGMII1_TXD0", "RGMII1_TXD1", + "RGMII1_TXD2", "RGMII1_TXD3", "RGMII1_TXCTL"; + drive-strength = <9>; + }; +}; diff --git a/arch/arm/dts/uniphier-pxs3.dtsi b/arch/arm/dts/uniphier-pxs3.dtsi index ed079c1..bf3b1eae 100644 --- a/arch/arm/dts/uniphier-pxs3.dtsi +++ b/arch/arm/dts/uniphier-pxs3.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "socionext,uniphier-pxs3"; @@ -42,6 +43,7 @@ clocks = <&sys_clk 33>; enable-method = "psci"; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -51,6 +53,7 @@ clocks = <&sys_clk 33>; enable-method = "psci"; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -60,6 +63,7 @@ clocks = <&sys_clk 33>; enable-method = "psci"; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -69,6 +73,7 @@ clocks = <&sys_clk 33>; enable-method = "psci"; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; }; @@ -136,6 +141,37 @@ <1 10 4>; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; /* 250ms */ + polling-delay = <1000>; /* 1000ms */ + thermal-sensors = <&pvtctl>; + + trips { + cpu_crit: cpu-crit { + temperature = <110000>; /* 110C */ + hysteresis = <2000>; + type = "critical"; + }; + cpu_alert: cpu-alert { + temperature = <100000>; /* 100C */ + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -157,6 +193,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; @@ -168,11 +206,13 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006100 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 12>; + resets = <&peri_rst 12>; }; serial0: serial@54006800 { @@ -462,6 +502,14 @@ }; }; + xdmac: dma-controller@5fc10000 { + compatible = "socionext,uniphier-xdmac"; + reg = <0x5fc10000 0x5300>; + interrupts = <0 188 4>; + dma-channels = <16>; + #dma-cells = <2>; + }; + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pxs3-aidet"; reg = <0x5fc20000 0x200>; @@ -496,6 +544,13 @@ watchdog { compatible = "socionext,uniphier-wdt"; }; + + pvtctl: pvtctl { + compatible = "socionext,uniphier-pxs3-thermal"; + interrupts = <0 3 4>; + #thermal-sensor-cells = <0>; + socionext,tmod-calibration = <0x0f22 0x68ee>; + }; }; eth0: ethernet@65000000 { diff --git a/arch/arm/dts/uniphier-sld8.dtsi b/arch/arm/dts/uniphier-sld8.dtsi index 393157e..93ddebb 100644 --- a/arch/arm/dts/uniphier-sld8.dtsi +++ b/arch/arm/dts/uniphier-sld8.dtsi @@ -67,6 +67,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index bfb445a..3a8eee7 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -3,24 +3,15 @@ if ARCH_UNIPHIER config SYS_CONFIG_NAME default "uniphier" -config ARCH_UNIPHIER_32BIT - bool - select ARCH_SUPPORT_PSCI - select ARMV7_NONSEC - select CPU_V7A - select CPU_V7_HAS_NONSEC - choice prompt "UniPhier SoC select" - default ARCH_UNIPHIER_V7_MULTI - -config ARCH_UNIPHIER_LD4_SLD8 - bool "UniPhier LD4/sLD8 SoCs" - select ARCH_UNIPHIER_32BIT config ARCH_UNIPHIER_V7_MULTI - bool "UniPhier Pro4/Pro5/PXs2/LD6b SoCs" - select ARCH_UNIPHIER_32BIT + bool "UniPhier V7 SoCs" + select ARCH_SUPPORT_PSCI + select ARMV7_NONSEC + select CPU_V7A + select CPU_V7_HAS_NONSEC config ARCH_UNIPHIER_V8_MULTI bool "UniPhier V8 SoCs" @@ -32,32 +23,38 @@ endchoice config ARCH_UNIPHIER_LD4 bool "Enable UniPhier LD4 SoC support" - depends on ARCH_UNIPHIER_LD4_SLD8 + depends on ARCH_UNIPHIER_V7_MULTI + depends on !SPL || SPL_TEXT_BASE = 0x00040000 default y config ARCH_UNIPHIER_SLD8 bool "Enable UniPhier sLD8 SoC support" - depends on ARCH_UNIPHIER_LD4_SLD8 + depends on ARCH_UNIPHIER_V7_MULTI + depends on !SPL || SPL_TEXT_BASE = 0x00040000 default y config ARCH_UNIPHIER_PRO4 bool "Enable UniPhier Pro4 SoC support" depends on ARCH_UNIPHIER_V7_MULTI + depends on !SPL || SPL_TEXT_BASE = 0x00100000 default y config ARCH_UNIPHIER_PRO5 bool "Enable UniPhier Pro5 SoC support" depends on ARCH_UNIPHIER_V7_MULTI + depends on !SPL || SPL_TEXT_BASE = 0x00100000 default y config ARCH_UNIPHIER_PXS2 bool "Enable UniPhier Pxs2 SoC support" depends on ARCH_UNIPHIER_V7_MULTI + depends on !SPL || SPL_TEXT_BASE = 0x00100000 default y config ARCH_UNIPHIER_LD6B bool "Enable UniPhier LD6b SoC support" depends on ARCH_UNIPHIER_V7_MULTI + depends on !SPL || SPL_TEXT_BASE = 0x00100000 default y config ARCH_UNIPHIER_LD11 @@ -78,7 +75,7 @@ config ARCH_UNIPHIER_PXS3 config CACHE_UNIPHIER bool "Enable the UniPhier L2 cache controller" - depends on ARCH_UNIPHIER_32BIT + depends on ARCH_UNIPHIER_V7_MULTI default y select SYS_CACHE_SHIFT_7 help @@ -86,6 +83,7 @@ config CACHE_UNIPHIER config MICRO_SUPPORT_CARD bool "Use Micro Support Card" + depends on UNIPHIER_SYSTEM_BUS help This option provides support for the expansion board, available on some UniPhier reference boards. @@ -118,5 +116,5 @@ config CMD_DDRMPHY_DUMP training; it is useful for the evaluation of DDR Multi PHY training. config SYS_SOC - default "uniphier-v7" if ARCH_UNIPHIER_LD4_SLD8 || ARCH_UNIPHIER_V7_MULTI + default "uniphier-v7" if ARCH_UNIPHIER_V7_MULTI endif diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 769778c..38b6d90 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -22,12 +22,10 @@ endif obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o obj-y += pinctrl-glue.o obj-$(CONFIG_MMC) += mmc-first-dev.o -obj-$(CONFIG_NAND_DENALI) += nand-reset.o obj-y += fdt-fixup.o endif -obj-y += sbc/ obj-y += soc-info.o obj-y += boot-device/ obj-y += clk/ diff --git a/arch/arm/mach-uniphier/arm64/Makefile b/arch/arm/mach-uniphier/arm64/Makefile index c569551..750c4f7 100644 --- a/arch/arm/mach-uniphier/arm64/Makefile +++ b/arch/arm/mach-uniphier/arm64/Makefile @@ -1,4 +1,3 @@ # SPDX-License-Identifier: GPL-2.0+ obj-y += mem_map.o -obj-$(CONFIG_ARCH_UNIPHIER_LD20) += lowlevel_init.o diff --git a/arch/arm/mach-uniphier/arm64/lowlevel_init.S b/arch/arm/mach-uniphier/arm64/lowlevel_init.S deleted file mode 100644 index f4e5cbb..0000000 --- a/arch/arm/mach-uniphier/arm64/lowlevel_init.S +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2017 Socionext Inc. - */ - -#include <linux/linkage.h> - -ENTRY(lowlevel_init) - /* LD20 needs the following code to boot. I do not know why. */ - mrs x0, sctlr_el1 - msr sctlr_el1, x0 - ret -ENDPROC(lowlevel_init) diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c index 4f9cd6e..30e4e23 100644 --- a/arch/arm/mach-uniphier/board_init.c +++ b/arch/arm/mach-uniphier/board_init.c @@ -13,6 +13,33 @@ #include "micro-support-card.h" #include "soc-info.h" +#define PC0CTRL 0x598000c0 + +#if defined(CONFIG_ARCH_UNIPHIER_LD4) || defined(CONFIG_ARCH_UNIPHIER_SLD8) +static void uniphier_ld4_sbc_init(void) +{ + u32 tmp; + + /* system bus output enable */ + tmp = readl(PC0CTRL); + tmp &= 0xfffffcff; + writel(tmp, PC0CTRL); +} +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PXS2) || \ + defined(CONFIG_ARCH_UNIPHIER_LD6B) || \ + defined(CONFIG_ARCH_UNIPHIER_LD11) || \ + defined(CONFIG_ARCH_UNIPHIER_LD20) || \ + defined(CONFIG_ARCH_UNIPHIER_PXS3) +static void uniphier_pxs2_sbc_init(void) +{ + /* necessary for ROM boot ?? */ + /* system bus output enable */ + writel(0x17, PC0CTRL); +} +#endif + #ifdef CONFIG_ARCH_UNIPHIER_LD20 static void uniphier_ld20_misc_init(void) { @@ -45,7 +72,6 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_PRO4) { .soc_id = UNIPHIER_PRO4_ID, - .sbc_init = uniphier_sbc_init_savepin, .pll_init = uniphier_pro4_pll_init, .clk_init = uniphier_pro4_clk_init, }, @@ -60,7 +86,6 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_PRO5) { .soc_id = UNIPHIER_PRO5_ID, - .sbc_init = uniphier_sbc_init_savepin, .clk_init = uniphier_pro5_clk_init, }, #endif @@ -81,7 +106,7 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_LD11) { .soc_id = UNIPHIER_LD11_ID, - .sbc_init = uniphier_ld11_sbc_init, + .sbc_init = uniphier_pxs2_sbc_init, .pll_init = uniphier_ld11_pll_init, .clk_init = uniphier_ld11_clk_init, }, @@ -89,7 +114,7 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_LD20) { .soc_id = UNIPHIER_LD20_ID, - .sbc_init = uniphier_ld11_sbc_init, + .sbc_init = uniphier_pxs2_sbc_init, .pll_init = uniphier_ld20_pll_init, .clk_init = uniphier_ld20_clk_init, .misc_init = uniphier_ld20_misc_init, @@ -118,7 +143,8 @@ int board_init(void) return -EINVAL; } - initdata->sbc_init(); + if (initdata->sbc_init) + initdata->sbc_init(); support_card_init(); @@ -137,14 +163,6 @@ int board_init(void) if (initdata->misc_init) initdata->misc_init(); - led_puts("U3"); - - support_card_late_init(); - - led_puts("U4"); - - uniphier_nand_reset_assert(); - led_puts("Uboo"); return 0; diff --git a/arch/arm/mach-uniphier/boot-device/boot-device.c b/arch/arm/mach-uniphier/boot-device/boot-device.c index 69a35f5..98ff34c 100644 --- a/arch/arm/mach-uniphier/boot-device/boot-device.c +++ b/arch/arm/mach-uniphier/boot-device/boot-device.c @@ -14,11 +14,18 @@ #include <linux/log2.h> #include "../init.h" -#include "../sbc/sbc-regs.h" #include "../sg-regs.h" #include "../soc-info.h" #include "boot-device.h" +#define SBBASE0 0x58c00100 +#define SBBASE_BANK_ENABLE BIT(0) + +static int uniphier_sbc_boot_is_swapped(void) +{ + return !(readl(SBBASE0) & SBBASE_BANK_ENABLE); +} + struct uniphier_boot_device_info { unsigned int soc_id; unsigned int boot_device_sel_shift; diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h index 6223037..dd978c0 100644 --- a/arch/arm/mach-uniphier/init.h +++ b/arch/arm/mach-uniphier/init.h @@ -34,34 +34,6 @@ int uniphier_sld8_init(const struct uniphier_board_data *bd); int uniphier_pro5_init(const struct uniphier_board_data *bd); int uniphier_pxs2_init(const struct uniphier_board_data *bd); -#if defined(CONFIG_MICRO_SUPPORT_CARD) -void uniphier_sbc_init_admulti(void); -void uniphier_sbc_init_savepin(void); -void uniphier_ld4_sbc_init(void); -void uniphier_pxs2_sbc_init(void); -void uniphier_ld11_sbc_init(void); -#else -static inline void uniphier_sbc_init_admulti(void) -{ -} - -static inline void uniphier_sbc_init_savepin(void) -{ -} - -static inline void uniphier_ld4_sbc_init(void) -{ -} - -static inline void uniphier_pxs2_sbc_init(void) -{ -} - -static inline void uniphier_ld11_sbc_init(void) -{ -} -#endif - void uniphier_ld4_bcu_init(const struct uniphier_board_data *bd); int uniphier_memconf_2ch_init(const struct uniphier_board_data *bd); @@ -103,13 +75,6 @@ int uniphier_have_internal_stm(void); int uniphier_boot_from_backend(void); int uniphier_pin_init(const char *pinconfig_name); -#ifdef CONFIG_NAND_DENALI -void uniphier_nand_reset_assert(void); -#else -static inline void uniphier_nand_reset_assert(void) -{ -} -#endif #ifdef CONFIG_ARM64 void uniphier_mem_map_init(unsigned long dram_base, unsigned long dram_size); #else diff --git a/arch/arm/mach-uniphier/micro-support-card.c b/arch/arm/mach-uniphier/micro-support-card.c index b09ec54..dbd156f 100644 --- a/arch/arm/mach-uniphier/micro-support-card.c +++ b/arch/arm/mach-uniphier/micro-support-card.c @@ -5,8 +5,7 @@ * Author: Masahiro Yamada <yamada.masahiro@socionext.com> */ -#include <config.h> -#include <dm/of.h> +#include <dm.h> #include <fdt_support.h> #include <linux/ctype.h> #include <linux/delay.h> @@ -91,6 +90,17 @@ static int support_card_show_revision(void) void support_card_init(void) { + struct udevice *dev; + int ret; + + /* The system bus must be initialized for access to the support card. */ + ret = uclass_get_device_by_driver(UCLASS_SIMPLE_BUS, + DM_GET_DRIVER(uniphier_system_bus_driver), + &dev); + if (ret) + return; + + /* Check DT to see if this board has the support card. */ support_card_detect(); if (!support_card_found) @@ -107,102 +117,6 @@ void support_card_init(void) support_card_show_revision(); } -#if defined(CONFIG_MTD_NOR_FLASH) - -#include <mtd/cfi_flash.h> - -struct memory_bank { - phys_addr_t base; - unsigned long size; -}; - -static int mem_is_flash(const struct memory_bank *mem) -{ - const int loop = 128; - u32 *scratch_addr; - u32 saved_value; - int ret = 1; - int i; - - /* just in case, use the tail of the memory bank */ - scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop, - sizeof(u32) * loop, MAP_NOCACHE); - - for (i = 0; i < loop; i++, scratch_addr++) { - saved_value = readl(scratch_addr); - writel(~saved_value, scratch_addr); - if (readl(scratch_addr) != saved_value) { - /* We assume no memory or SRAM here. */ - writel(saved_value, scratch_addr); - ret = 0; - break; - } - } - - unmap_physmem(scratch_addr, MAP_NOCACHE); - - return ret; -} - -/* {address, size} */ -static const struct memory_bank memory_banks[] = { - {0x42000000, 0x01f00000}, -}; - -static const struct memory_bank -*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT]; - -phys_addr_t cfi_flash_bank_addr(int i) -{ - return flash_banks_list[i]->base; -} - -unsigned long cfi_flash_bank_size(int i) -{ - return flash_banks_list[i]->size; -} - -static void detect_num_flash_banks(void) -{ - const struct memory_bank *memory_bank, *end; - - cfi_flash_num_flash_banks = 0; - - memory_bank = memory_banks; - end = memory_bank + ARRAY_SIZE(memory_banks); - - for (; memory_bank < end; memory_bank++) { - if (cfi_flash_num_flash_banks >= - CONFIG_SYS_MAX_FLASH_BANKS_DETECT) - break; - - if (mem_is_flash(memory_bank)) { - flash_banks_list[cfi_flash_num_flash_banks] = - memory_bank; - - debug("flash bank found: base = 0x%lx, size = 0x%lx\n", - (unsigned long)memory_bank->base, - (unsigned long)memory_bank->size); - cfi_flash_num_flash_banks++; - } - } - - debug("number of flash banks: %d\n", cfi_flash_num_flash_banks); -} -#else /* CONFIG_MTD_NOR_FLASH */ -static void detect_num_flash_banks(void) -{ -}; -#endif /* CONFIG_MTD_NOR_FLASH */ - -void support_card_late_init(void) -{ - if (!support_card_found) - return; - - detect_num_flash_banks(); -} - static const u8 ledval_num[] = { 0x7e, /* 0 */ 0x0c, /* 1 */ diff --git a/arch/arm/mach-uniphier/nand-reset.c b/arch/arm/mach-uniphier/nand-reset.c deleted file mode 100644 index 11cadaa..0000000 --- a/arch/arm/mach-uniphier/nand-reset.c +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 or later -/* - * Copyright (C) 2020 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - */ - -#include <linux/errno.h> -#include <dm.h> -#include <dm/uclass-internal.h> -#include <reset.h> - -#include "init.h" - -/* - * Assert the Denali NAND controller reset if found. - * - * On LD4, the bootstrap process starts running after power-on reset regardless - * of the boot mode, here the pin-mux is not necessarily set up for NAND, then - * the controller is stuck. Assert the controller reset here, and should be - * deasserted in the driver after the pin-mux is correctly handled. For other - * SoCs, the bootstrap runs only when the boot mode selects ONFi, but it is yet - * effective when the boot swap is on. So, the reset should be asserted anyway. - */ -void uniphier_nand_reset_assert(void) -{ - struct udevice *dev; - struct reset_ctl_bulk resets; - int ret; - - ret = uclass_find_first_device(UCLASS_MTD, &dev); - if (ret || !dev) - return; - - /* make sure this is the Denali NAND controller */ - if (strcmp(dev->driver->name, "denali-nand-dt")) - return; - - ret = reset_get_bulk(dev, &resets); - if (ret) - return; - - reset_assert_bulk(&resets); -} diff --git a/arch/arm/mach-uniphier/sbc/Makefile b/arch/arm/mach-uniphier/sbc/Makefile deleted file mode 100644 index 6c698a3..0000000 --- a/arch/arm/mach-uniphier/sbc/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ - -obj-y += sbc-boot.o - -ifndef CONFIG_SPL_BUILD -obj-y += sbc.o - -obj-$(CONFIG_ARCH_UNIPHIER_LD4) += sbc-ld4.o -obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += sbc-ld4.o -obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += sbc-pxs2.o -obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += sbc-pxs2.o -obj-$(CONFIG_ARCH_UNIPHIER_LD11) += sbc-ld11.o -obj-$(CONFIG_ARCH_UNIPHIER_LD20) += sbc-ld11.o -obj-$(CONFIG_ARCH_UNIPHIER_PXS3) += sbc-pxs2.o -endif diff --git a/arch/arm/mach-uniphier/sbc/sbc-boot.c b/arch/arm/mach-uniphier/sbc/sbc-boot.c deleted file mode 100644 index ec22b45..0000000 --- a/arch/arm/mach-uniphier/sbc/sbc-boot.c +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (C) 2011-2014 Panasonic Corporation -// Copyright (C) 2015-2019 Socionext Inc. - -#include <linux/io.h> - -#include "sbc-regs.h" - -int uniphier_sbc_boot_is_swapped(void) -{ - return !(readl(SBBASE0) & SBBASE_BANK_ENABLE); -} diff --git a/arch/arm/mach-uniphier/sbc/sbc-ld11.c b/arch/arm/mach-uniphier/sbc/sbc-ld11.c deleted file mode 100644 index a0162e1..0000000 --- a/arch/arm/mach-uniphier/sbc/sbc-ld11.c +++ /dev/null @@ -1,26 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2016-2017 Socionext Inc. - */ - -#include <spl.h> -#include <linux/io.h> - -#include "../init.h" -#include "sbc-regs.h" - -void uniphier_ld11_sbc_init(void) -{ - if (!uniphier_sbc_is_enabled()) - return; - - uniphier_sbc_init_savepin(); - - /* necessary for ROM boot ?? */ - /* system bus output enable */ - writel(0x17, PC0CTRL); - - /* pins for NAND and System Bus are multiplexed */ - if (spl_boot_device() != BOOT_DEVICE_NAND) - uniphier_pin_init("system-bus"); -} diff --git a/arch/arm/mach-uniphier/sbc/sbc-ld4.c b/arch/arm/mach-uniphier/sbc/sbc-ld4.c deleted file mode 100644 index 72e9743..0000000 --- a/arch/arm/mach-uniphier/sbc/sbc-ld4.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2011-2015 Panasonic Corporation - * Copyright (C) 2015-2017 Socionext Inc. - */ - -#include <linux/io.h> - -#include "../init.h" -#include "sbc-regs.h" - -void uniphier_ld4_sbc_init(void) -{ - u32 tmp; - - if (!uniphier_sbc_is_enabled()) - return; - - uniphier_sbc_init_savepin(); - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); -} diff --git a/arch/arm/mach-uniphier/sbc/sbc-pxs2.c b/arch/arm/mach-uniphier/sbc/sbc-pxs2.c deleted file mode 100644 index 3275f22..0000000 --- a/arch/arm/mach-uniphier/sbc/sbc-pxs2.c +++ /dev/null @@ -1,23 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2016-2017 Socionext Inc. - */ - -#include <linux/io.h> - -#include "../init.h" -#include "sbc-regs.h" - -void uniphier_pxs2_sbc_init(void) -{ - if (!uniphier_sbc_is_enabled()) - return; - - uniphier_sbc_init_savepin(); - - /* necessary for ROM boot ?? */ - /* system bus output enable */ - writel(0x17, PC0CTRL); - - uniphier_pin_init("system-bus"); /* PXs3 */ -} diff --git a/arch/arm/mach-uniphier/sbc/sbc-regs.h b/arch/arm/mach-uniphier/sbc/sbc-regs.h deleted file mode 100644 index 1e96186..0000000 --- a/arch/arm/mach-uniphier/sbc/sbc-regs.h +++ /dev/null @@ -1,82 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * UniPhier SBC (System Bus Controller) registers - * - * Copyright (C) 2011-2014 Panasonic Corporation - * Copyright (C) 2015-2016 Socionext Inc. - */ - -#ifndef ARCH_SBC_REGS_H -#define ARCH_SBC_REGS_H - -#define SBBASE_BASE 0x58c00100 -#define SBBASE(x) (SBBASE_BASE + (x) * 0x10) - -#define SBBASE0 (SBBASE(0)) -#define SBBASE1 (SBBASE(1)) -#define SBBASE2 (SBBASE(2)) -#define SBBASE3 (SBBASE(3)) -#define SBBASE4 (SBBASE(4)) -#define SBBASE5 (SBBASE(5)) -#define SBBASE6 (SBBASE(6)) -#define SBBASE7 (SBBASE(7)) - -#define SBBASE_BANK_ENABLE (0x00000001) - -#define SBCTRL_BASE 0x58c00200 -#define SBCTRL(x, y) (SBCTRL_BASE + (x) * 0x10 + (y) * 4) - -#define SBCTRL00 SBCTRL(0, 0) -#define SBCTRL01 SBCTRL(0, 1) -#define SBCTRL02 SBCTRL(0, 2) -#define SBCTRL03 SBCTRL(0, 3) -#define SBCTRL04 (SBCTRL_BASE + 0x100) - -#define SBCTRL10 SBCTRL(1, 0) -#define SBCTRL11 SBCTRL(1, 1) -#define SBCTRL12 SBCTRL(1, 2) -#define SBCTRL13 SBCTRL(1, 3) -#define SBCTRL14 (SBCTRL_BASE + 0x110) - -#define SBCTRL20 SBCTRL(2, 0) -#define SBCTRL21 SBCTRL(2, 1) -#define SBCTRL22 SBCTRL(2, 2) -#define SBCTRL23 SBCTRL(2, 3) -#define SBCTRL24 (SBCTRL_BASE + 0x120) - -#define SBCTRL30 SBCTRL(3, 0) -#define SBCTRL31 SBCTRL(3, 1) -#define SBCTRL32 SBCTRL(3, 2) -#define SBCTRL33 SBCTRL(3, 3) -#define SBCTRL34 (SBCTRL_BASE + 0x130) - -#define SBCTRL40 SBCTRL(4, 0) -#define SBCTRL41 SBCTRL(4, 1) -#define SBCTRL42 SBCTRL(4, 2) -#define SBCTRL43 SBCTRL(4, 3) -#define SBCTRL44 (SBCTRL_BASE + 0x140) - -#define SBCTRL50 SBCTRL(5, 0) -#define SBCTRL51 SBCTRL(5, 1) -#define SBCTRL52 SBCTRL(5, 2) -#define SBCTRL53 SBCTRL(5, 3) -#define SBCTRL54 (SBCTRL_BASE + 0x150) - -#define SBCTRL60 SBCTRL(6, 0) -#define SBCTRL61 SBCTRL(6, 1) -#define SBCTRL62 SBCTRL(6, 2) -#define SBCTRL63 SBCTRL(6, 3) -#define SBCTRL64 (SBCTRL_BASE + 0x160) - -#define SBCTRL70 SBCTRL(7, 0) -#define SBCTRL71 SBCTRL(7, 1) -#define SBCTRL72 SBCTRL(7, 2) -#define SBCTRL73 SBCTRL(7, 3) -#define SBCTRL74 (SBCTRL_BASE + 0x170) - -#define PC0CTRL 0x598000c0 - -int uniphier_sbc_boot_is_swapped(void); -int uniphier_sbc_is_enabled(void); - -#endif /* ARCH_SBC_REGS_H */ diff --git a/arch/arm/mach-uniphier/sbc/sbc.c b/arch/arm/mach-uniphier/sbc/sbc.c deleted file mode 100644 index 2100f49..0000000 --- a/arch/arm/mach-uniphier/sbc/sbc.c +++ /dev/null @@ -1,95 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2011-2015 Panasonic Corporation - * Copyright (C) 2015-2017 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - */ - -#include <linux/io.h> -#include <asm/global_data.h> - -#include "../init.h" -#include "sbc-regs.h" - -#define SBCTRL0_ADMULTIPLX_PERI_VALUE 0x33120000 -#define SBCTRL1_ADMULTIPLX_PERI_VALUE 0x03005500 -#define SBCTRL2_ADMULTIPLX_PERI_VALUE 0x14000020 - -#define SBCTRL0_ADMULTIPLX_MEM_VALUE 0x33120000 -#define SBCTRL1_ADMULTIPLX_MEM_VALUE 0x03005500 -#define SBCTRL2_ADMULTIPLX_MEM_VALUE 0x14000010 - -/* slower but LED works */ -#define SBCTRL0_SAVEPIN_PERI_VALUE 0x55450000 -#define SBCTRL1_SAVEPIN_PERI_VALUE 0x07168d00 -#define SBCTRL2_SAVEPIN_PERI_VALUE 0x34000009 -#define SBCTRL4_SAVEPIN_PERI_VALUE 0x02110110 - -/* faster but LED does not work */ -#define SBCTRL0_SAVEPIN_MEM_VALUE 0x55450000 -#define SBCTRL1_SAVEPIN_MEM_VALUE 0x06057700 -/* NOR flash needs more wait counts than SRAM */ -#define SBCTRL2_SAVEPIN_MEM_VALUE 0x34000009 -#define SBCTRL4_SAVEPIN_MEM_VALUE 0x02110210 - -int uniphier_sbc_is_enabled(void) -{ - DECLARE_GLOBAL_DATA_PTR; - const void *fdt = gd->fdt_blob; - int offset; - - offset = fdt_node_offset_by_compatible(fdt, 0, - "socionext,uniphier-system-bus"); - if (offset < 0) - return 0; - - return fdtdec_get_is_enabled(fdt, offset); -} - -static void __uniphier_sbc_init(int savepin) -{ - /* - * Only CS1 is connected to support card. - * BKSZ[1:0] should be set to "01". - */ - if (savepin) { - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); - } else { - writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12); - } - - if (uniphier_sbc_boot_is_swapped()) { - /* - * Boot Swap On: boot from external NOR/SRAM - * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. - * - * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank - * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals - */ - writel(0x0000bc01, SBBASE0); - } else { - /* - * Boot Swap Off: boot from mask ROM - * 0x40000000-0x41ffffff: mask ROM - * 0x42000000-0x43efffff: memory bank (31MB) - * 0x43f00000-0x43ffffff: peripherals (1MB) - */ - writel(0x0000be01, SBBASE0); /* dummy */ - writel(0x0200be01, SBBASE1); - } -} - -void uniphier_sbc_init_admulti(void) -{ - __uniphier_sbc_init(0); -} - -void uniphier_sbc_init_savepin(void) -{ - __uniphier_sbc_init(1); -} diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig index 2e809ca..3c9cab0 100644 --- a/configs/uniphier_ld4_sld8_defconfig +++ b/configs/uniphier_ld4_sld8_defconfig @@ -8,7 +8,6 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_NR_DRAM_BANKS=3 CONFIG_SPL=y -CONFIG_ARCH_UNIPHIER_LD4_SLD8=y CONFIG_MICRO_SUPPORT_CARD=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot" @@ -18,7 +17,6 @@ CONFIG_LOGLEVEL=6 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_CMD_CONFIG=y -CONFIG_CMD_IMLS=y # CONFIG_CMD_XIMG is not set CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y @@ -45,8 +43,6 @@ CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_UNIPHIER=y CONFIG_MTD=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_DENALI_DT=y CONFIG_SPL_NAND_DENALI=y diff --git a/configs/uniphier_v7_defconfig b/configs/uniphier_v7_defconfig index 07c38a2..48958b1 100644 --- a/configs/uniphier_v7_defconfig +++ b/configs/uniphier_v7_defconfig @@ -17,7 +17,6 @@ CONFIG_LOGLEVEL=6 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_CMD_CONFIG=y -CONFIG_CMD_IMLS=y # CONFIG_CMD_XIMG is not set CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y @@ -45,8 +44,6 @@ CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_UNIPHIER=y CONFIG_MTD=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_DENALI_DT=y CONFIG_SPL_NAND_DENALI=y diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig index 9edb7ec..9ab3e26 100644 --- a/configs/uniphier_v8_defconfig +++ b/configs/uniphier_v8_defconfig @@ -14,7 +14,6 @@ CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="env exist ${bootdev}preboot && run ${bootdev}preboot" CONFIG_LOGLEVEL=6 CONFIG_CMD_CONFIG=y -CONFIG_CMD_IMLS=y # CONFIG_CMD_XIMG is not set CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y @@ -45,8 +44,6 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ADMA=y CONFIG_MMC_SDHCI_CADENCE=y CONFIG_MTD=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_DENALI_DT=y CONFIG_SNI_AVE=y diff --git a/drivers/Kconfig b/drivers/Kconfig index e34a227..7a839fa 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -10,6 +10,8 @@ source "drivers/ata/Kconfig" source "drivers/axi/Kconfig" +source "drivers/bus/Kconfig" + source "drivers/block/Kconfig" source "drivers/bootcount/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 94e8c5d..afd159e 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -74,6 +74,7 @@ ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) obj-y += adc/ obj-y += ata/ +obj-y += bus/ obj-$(CONFIG_DM_DEMO) += demo/ obj-$(CONFIG_BIOSEMU) += bios_emulator/ obj-y += block/ diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig new file mode 100644 index 0000000..07a33c6 --- /dev/null +++ b/drivers/bus/Kconfig @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Bus Devices +# + +menu "Bus devices" + +config UNIPHIER_SYSTEM_BUS + bool "UniPhier System Bus driver" + depends on ARCH_UNIPHIER + default y + help + Support for UniPhier System Bus, a simple external bus. This is + needed to use on-board devices connected to UniPhier SoCs. + +endmenu diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile new file mode 100644 index 0000000..0b97fc1 --- /dev/null +++ b/drivers/bus/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the bus drivers. +# + +obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o diff --git a/drivers/bus/uniphier-system-bus.c b/drivers/bus/uniphier-system-bus.c new file mode 100644 index 0000000..ea08d66 --- /dev/null +++ b/drivers/bus/uniphier-system-bus.c @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/bitops.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/sizes.h> +#include <linux/types.h> +#include <dm.h> + +/* System Bus Controller registers */ +#define UNIPHIER_SBC_BASE 0x100 /* base address of bank0 space */ +#define UNIPHIER_SBC_BASE_BE BIT(0) /* bank_enable */ +#define UNIPHIER_SBC_CTRL0 0x200 /* timing parameter 0 of bank0 */ +#define UNIPHIER_SBC_CTRL1 0x204 /* timing parameter 1 of bank0 */ +#define UNIPHIER_SBC_CTRL2 0x208 /* timing parameter 2 of bank0 */ +#define UNIPHIER_SBC_CTRL3 0x20c /* timing parameter 3 of bank0 */ +#define UNIPHIER_SBC_CTRL4 0x300 /* timing parameter 4 of bank0 */ + +#define UNIPHIER_SBC_STRIDE 0x10 /* register stride to next bank */ + +#if 1 +/* slower but LED works */ +#define SBCTRL0_VALUE 0x55450000 +#define SBCTRL1_VALUE 0x07168d00 +#define SBCTRL2_VALUE 0x34000009 +#define SBCTRL4_VALUE 0x02110110 + +#else +/* faster but LED does not work */ +#define SBCTRL0_VALUE 0x55450000 +#define SBCTRL1_VALUE 0x06057700 +/* NOR flash needs more wait counts than SRAM */ +#define SBCTRL2_VALUE 0x34000009 +#define SBCTRL4_VALUE 0x02110210 +#endif + +void uniphier_system_bus_set_reg(void __iomem *membase) +{ + void __iomem *bank0_base = membase; + void __iomem *bank1_base = membase + UNIPHIER_SBC_STRIDE; + + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_VALUE, bank1_base + UNIPHIER_SBC_CTRL0); + writel(SBCTRL1_VALUE, bank1_base + UNIPHIER_SBC_CTRL1); + writel(SBCTRL2_VALUE, bank1_base + UNIPHIER_SBC_CTRL2); + writel(SBCTRL4_VALUE, bank1_base + UNIPHIER_SBC_CTRL4); + + if (readl(bank1_base + UNIPHIER_SBC_BASE) & UNIPHIER_SBC_BASE_BE) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. + * + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals + */ + writel(0x0000bc01, bank0_base + UNIPHIER_SBC_BASE); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) + */ + writel(0x0000be01, bank0_base + UNIPHIER_SBC_BASE); /* dummy */ + writel(0x0200be01, bank0_base + UNIPHIER_SBC_BASE); + } +} + +static int uniphier_system_bus_probe(struct udevice *dev) +{ + fdt_addr_t base; + void __iomem *membase; + + base = dev_read_addr(dev); + if (base == FDT_ADDR_T_NONE) + return -EINVAL; + + membase = devm_ioremap(dev, base, SZ_1K); + if (!membase) + return -ENOMEM; + + uniphier_system_bus_set_reg(membase); + + return 0; +} + +static const struct udevice_id uniphier_system_bus_match[] = { + { .compatible = "socionext,uniphier-system-bus" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(uniphier_system_bus_driver) = { + .name = "uniphier-system-bus", + .id = UCLASS_SIMPLE_BUS, + .of_match = uniphier_system_bus_match, + .probe = uniphier_system_bus_probe, +}; diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c index 15e9029..ab91db8 100644 --- a/drivers/mtd/nand/raw/denali.c +++ b/drivers/mtd/nand/raw/denali.c @@ -1220,6 +1220,17 @@ static int denali_multidev_fixup(struct denali_nand_info *denali) return 0; } +int denali_wait_reset_complete(struct denali_nand_info *denali) +{ + u32 irq_status; + + irq_status = denali_wait_for_irq(denali, INTR__RST_COMP); + if (!(irq_status & INTR__RST_COMP)) + return -EIO; + + return 0; +} + int denali_init(struct denali_nand_info *denali) { struct nand_chip *chip = &denali->nand; diff --git a/drivers/mtd/nand/raw/denali.h b/drivers/mtd/nand/raw/denali.h index 019deda..6cd02b2 100644 --- a/drivers/mtd/nand/raw/denali.h +++ b/drivers/mtd/nand/raw/denali.h @@ -321,6 +321,7 @@ struct denali_nand_info { #define DENALI_CAP_DMA_64BIT BIT(1) int denali_calc_ecc_bytes(int step_size, int strength); +int denali_wait_reset_complete(struct denali_nand_info *denali); int denali_init(struct denali_nand_info *denali); #endif /* __DENALI_H__ */ diff --git a/drivers/mtd/nand/raw/denali_dt.c b/drivers/mtd/nand/raw/denali_dt.c index 2728e80..8318ff5 100644 --- a/drivers/mtd/nand/raw/denali_dt.c +++ b/drivers/mtd/nand/raw/denali_dt.c @@ -148,6 +148,8 @@ static int denali_dt_probe(struct udevice *dev) if (ret) { dev_warn(dev, "Can't get reset: %d\n", ret); } else { + reset_assert_bulk(&resets); + udelay(2); reset_deassert_bulk(&resets); /* @@ -155,7 +157,11 @@ static int denali_dt_probe(struct udevice *dev) * kicked (bootstrap process). The driver must wait until it is * finished. Otherwise, it will result in unpredictable behavior. */ - udelay(200); + ret = denali_wait_reset_complete(denali); + if (ret) { + dev_err(denali->dev, "reset not completed.\n"); + return ret; + } } return denali_init(denali); diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c index c7f46e5..ad691b6 100644 --- a/drivers/serial/serial_uniphier.c +++ b/drivers/serial/serial_uniphier.c @@ -7,6 +7,8 @@ #include <common.h> #include <dm.h> +#include <linux/bitfield.h> +#include <linux/bitops.h> #include <linux/bug.h> #include <linux/io.h> #include <linux/serial_reg.h> @@ -15,77 +17,72 @@ #include <serial.h> #include <fdtdec.h> -/* - * Note: Register map is slightly different from that of 16550. - */ -struct uniphier_serial { - u32 rx; /* In: Receive buffer */ -#define tx rx /* Out: Transmit buffer */ - u32 ier; /* Interrupt Enable Register */ - u32 iir; /* In: Interrupt ID Register */ - u32 char_fcr; /* Charactor / FIFO Control Register */ - u32 lcr_mcr; /* Line/Modem Control Register */ -#define LCR_SHIFT 8 -#define LCR_MASK (0xff << (LCR_SHIFT)) - u32 lsr; /* In: Line Status Register */ - u32 msr; /* In: Modem Status Register */ - u32 __rsv0; - u32 __rsv1; - u32 dlr; /* Divisor Latch Register */ -}; +#define UNIPHIER_UART_REGSHIFT 2 + +#define UNIPHIER_UART_RX (0 << (UNIPHIER_UART_REGSHIFT)) +#define UNIPHIER_UART_TX UNIPHIER_UART_RX +/* bit[15:8] = CHAR, bit[7:0] = FCR */ +#define UNIPHIER_UART_CHAR_FCR (3 << (UNIPHIER_UART_REGSHIFT)) +#define UNIPHIER_UART_FCR_MASK GENMASK(7, 0) +/* bit[15:8] = LCR, bit[7:0] = MCR */ +#define UNIPHIER_UART_LCR_MCR (4 << (UNIPHIER_UART_REGSHIFT)) +#define UNIPHIER_UART_LCR_MASK GENMASK(15, 8) +#define UNIPHIER_UART_LSR (5 << (UNIPHIER_UART_REGSHIFT)) +/* Divisor Latch Register */ +#define UNIPHIER_UART_DLR (9 << (UNIPHIER_UART_REGSHIFT)) struct uniphier_serial_priv { - struct uniphier_serial __iomem *membase; + void __iomem *membase; unsigned int uartclk; }; -#define uniphier_serial_port(dev) \ - ((struct uniphier_serial_priv *)dev_get_priv(dev))->membase - static int uniphier_serial_setbrg(struct udevice *dev, int baudrate) { struct uniphier_serial_priv *priv = dev_get_priv(dev); - struct uniphier_serial __iomem *port = uniphier_serial_port(dev); - const unsigned int mode_x_div = 16; + static const unsigned int mode_x_div = 16; unsigned int divisor; divisor = DIV_ROUND_CLOSEST(priv->uartclk, mode_x_div * baudrate); - writel(divisor, &port->dlr); + /* flush the trasmitter before changing hw setting */ + while (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_TEMT)) + ; + + writel(divisor, priv->membase + UNIPHIER_UART_DLR); return 0; } static int uniphier_serial_getc(struct udevice *dev) { - struct uniphier_serial __iomem *port = uniphier_serial_port(dev); + struct uniphier_serial_priv *priv = dev_get_priv(dev); - if (!(readl(&port->lsr) & UART_LSR_DR)) + if (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_DR)) return -EAGAIN; - return readl(&port->rx); + return readl(priv->membase + UNIPHIER_UART_RX); } static int uniphier_serial_putc(struct udevice *dev, const char c) { - struct uniphier_serial __iomem *port = uniphier_serial_port(dev); + struct uniphier_serial_priv *priv = dev_get_priv(dev); - if (!(readl(&port->lsr) & UART_LSR_THRE)) + if (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_THRE)) return -EAGAIN; - writel(c, &port->tx); + writel(c, priv->membase + UNIPHIER_UART_TX); return 0; } static int uniphier_serial_pending(struct udevice *dev, bool input) { - struct uniphier_serial __iomem *port = uniphier_serial_port(dev); + struct uniphier_serial_priv *priv = dev_get_priv(dev); if (input) - return readl(&port->lsr) & UART_LSR_DR; + return readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_DR; else - return !(readl(&port->lsr) & UART_LSR_THRE); + return !(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_THRE); } /* @@ -113,7 +110,6 @@ static const struct uniphier_serial_clk_data uniphier_serial_clk_data[] = { static int uniphier_serial_probe(struct udevice *dev) { struct uniphier_serial_priv *priv = dev_get_priv(dev); - struct uniphier_serial __iomem *port; const struct uniphier_serial_clk_data *clk_data; ofnode root_node; fdt_addr_t base; @@ -123,12 +119,10 @@ static int uniphier_serial_probe(struct udevice *dev) if (base == FDT_ADDR_T_NONE) return -EINVAL; - port = devm_ioremap(dev, base, SZ_64); - if (!port) + priv->membase = devm_ioremap(dev, base, SZ_64); + if (!priv->membase) return -ENOMEM; - priv->membase = port; - root_node = ofnode_path("/"); clk_data = uniphier_serial_clk_data; while (clk_data->compatible) { @@ -143,10 +137,20 @@ static int uniphier_serial_probe(struct udevice *dev) priv->uartclk = clk_data->clk_rate; - tmp = readl(&port->lcr_mcr); - tmp &= ~LCR_MASK; - tmp |= UART_LCR_WLEN8 << LCR_SHIFT; - writel(tmp, &port->lcr_mcr); + /* flush the trasmitter empty before changing hw setting */ + while (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_TEMT)) + ; + + /* enable FIFO */ + tmp = readl(priv->membase + UNIPHIER_UART_CHAR_FCR); + tmp &= ~UNIPHIER_UART_FCR_MASK; + tmp |= FIELD_PREP(UNIPHIER_UART_FCR_MASK, UART_FCR_ENABLE_FIFO); + writel(tmp, priv->membase + UNIPHIER_UART_CHAR_FCR); + + tmp = readl(priv->membase + UNIPHIER_UART_LCR_MCR); + tmp &= ~UNIPHIER_UART_LCR_MASK; + tmp |= FIELD_PREP(UNIPHIER_UART_LCR_MASK, UART_LCR_WLEN8); + writel(tmp, priv->membase + UNIPHIER_UART_LCR_MCR); return 0; } diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 55fa85e..03bbbab 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -41,32 +41,12 @@ #define CONFIG_ARMV7_PSCI_1_0 -/*----------------------------------------------------------------------- - * MMU and Cache Setting - *----------------------------------------------------------------------*/ - #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) #define CONFIG_TIMESTAMP -/* FLASH related */ - -#define CONFIG_SYS_MAX_FLASH_SECT 256 #define CONFIG_SYS_MONITOR_BASE 0 -#define CONFIG_SYS_MONITOR_LEN 0x000d0000 /* 832KB */ -#define CONFIG_SYS_FLASH_BASE 0 - -/* - * flash_toggle does not work for our support card. - * We need to use flash_status_poll. - */ -#define CONFIG_SYS_CFI_FLASH_STATUS_POLL - -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 - -/* serial console configuration */ +#define CONFIG_SYS_MONITOR_LEN 0x00200000 /* 2MB */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ /* Boot Argument Buffer Size */ @@ -221,7 +201,7 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE) /* only for SPL */ -#define CONFIG_SPL_STACK (0x00200000) +#define CONFIG_SPL_STACK (0x00100000) #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 |