aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTom Rini <trini@konsulko.com>2021-09-09 07:54:49 -0400
committerTom Rini <trini@konsulko.com>2021-10-01 12:10:09 -0400
commitd9be8606bb983db398a7444533a72e3e4eabe011 (patch)
tree844ce7c66e8e546171c8fddc4674db46a2d3282d
parent14b38cb0c272db4ef5cd9d1af0aabd2636cdc9c0 (diff)
downloadu-boot-d9be8606bb983db398a7444533a72e3e4eabe011.zip
u-boot-d9be8606bb983db398a7444533a72e3e4eabe011.tar.gz
u-boot-d9be8606bb983db398a7444533a72e3e4eabe011.tar.bz2
arm: Remove aspenite board
This board has not been converted to CONFIG_DM by the deadline. Remove it. As this is the last armada100 platform, remove that support as well. Cc: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Tom Rini <trini@konsulko.com>
-rw-r--r--arch/arm/Kconfig6
-rw-r--r--arch/arm/cpu/arm926ejs/Makefile1
-rw-r--r--arch/arm/cpu/arm926ejs/armada100/Makefile7
-rw-r--r--arch/arm/cpu/arm926ejs/armada100/cpu.c93
-rw-r--r--arch/arm/cpu/arm926ejs/armada100/dram.c117
-rw-r--r--arch/arm/cpu/arm926ejs/armada100/timer.c198
-rw-r--r--arch/arm/include/asm/arch-armada100/armada100.h59
-rw-r--r--arch/arm/include/asm/arch-armada100/config.h27
-rw-r--r--arch/arm/include/asm/arch-armada100/cpu.h161
-rw-r--r--arch/arm/include/asm/arch-armada100/gpio.h31
-rw-r--r--arch/arm/include/asm/arch-armada100/mfp.h79
-rw-r--r--arch/arm/include/asm/arch-armada100/spi.h78
-rw-r--r--arch/arm/include/asm/arch-armada100/utmi-armada100.h62
-rw-r--r--board/Marvell/aspenite/Kconfig15
-rw-r--r--board/Marvell/aspenite/MAINTAINERS6
-rw-r--r--board/Marvell/aspenite/Makefile8
-rw-r--r--board/Marvell/aspenite/aspenite.c45
-rw-r--r--configs/aspenite_defconfig19
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/mvmfp.c55
-rw-r--r--drivers/mmc/mv_sdhci.c24
-rw-r--r--include/configs/aspenite.h30
22 files changed, 0 insertions, 1122 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1b1767d..6675a63 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -551,11 +551,6 @@ config ARCH_AT91
select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB
select SPL_SEPARATE_BSS if SPL
-config TARGET_ASPENITE
- bool "Support aspenite"
- select CPU_ARM926EJS
- select GPIO_EXTRA_HEADER
-
config ARCH_DAVINCI
bool "TI DaVinci"
select CPU_ARM926EJS
@@ -2144,7 +2139,6 @@ source "board/armltd/total_compute/Kconfig"
source "board/bosch/shc/Kconfig"
source "board/bosch/guardian/Kconfig"
-source "board/Marvell/aspenite/Kconfig"
source "board/Marvell/octeontx/Kconfig"
source "board/Marvell/octeontx2/Kconfig"
source "board/armltd/vexpress/Kconfig"
diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile
index 98aafe8..a6b29af 100644
--- a/arch/arm/cpu/arm926ejs/Makefile
+++ b/arch/arm/cpu/arm926ejs/Makefile
@@ -12,7 +12,6 @@ extra-y :=
endif
endif
-obj-$(CONFIG_ARMADA100) += armada100/
obj-$(CONFIG_MX25) += mx25/
obj-$(CONFIG_MX27) += mx27/
obj-$(if $(filter mxs,$(SOC)),y) += mxs/
diff --git a/arch/arm/cpu/arm926ejs/armada100/Makefile b/arch/arm/cpu/arm926ejs/armada100/Makefile
deleted file mode 100644
index 77ac0e2..0000000
--- a/arch/arm/cpu/arm926ejs/armada100/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2010
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
-
-obj-y = cpu.o timer.o dram.o
diff --git a/arch/arm/cpu/arm926ejs/armada100/cpu.c b/arch/arm/cpu/arm926ejs/armada100/cpu.c
deleted file mode 100644
index 96726b3..0000000
--- a/arch/arm/cpu/arm926ejs/armada100/cpu.c
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <init.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/armada100.h>
-
-#define UARTCLK14745KHZ (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1))
-#define SET_MRVL_ID (1<<8)
-#define L2C_RAM_SEL (1<<4)
-
-int arch_cpu_init(void)
-{
- u32 val;
- struct armd1cpu_registers *cpuregs =
- (struct armd1cpu_registers *) ARMD1_CPU_BASE;
-
- struct armd1apb1_registers *apb1clkres =
- (struct armd1apb1_registers *) ARMD1_APBC1_BASE;
-
- struct armd1mpmu_registers *mpmu =
- (struct armd1mpmu_registers *) ARMD1_MPMU_BASE;
-
- /* set SEL_MRVL_ID bit in ARMADA100_CPU_CONF register */
- val = readl(&cpuregs->cpu_conf);
- val = val | SET_MRVL_ID;
- writel(val, &cpuregs->cpu_conf);
-
- /* Enable Clocks for all hardware units */
- writel(0xFFFFFFFF, &mpmu->acgr);
-
- /* Turn on AIB and AIB-APB Functional clock */
- writel(APBC_APBCLK | APBC_FNCLK, &apb1clkres->aib);
-
- /* ensure L2 cache is not mapped as SRAM */
- val = readl(&cpuregs->cpu_conf);
- val = val & ~(L2C_RAM_SEL);
- writel(val, &cpuregs->cpu_conf);
-
- /* Enable GPIO clock */
- writel(APBC_APBCLK, &apb1clkres->gpio);
-
-#ifdef CONFIG_I2C_MV
- /* Enable general I2C clock */
- writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
- writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
-
- /* Enable power I2C clock */
- writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
- writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
-#endif
-
- /*
- * Enable Functional and APB clock at 14.7456MHz
- * for configured UART console
- */
-#if (CONFIG_SYS_NS16550_COM1 == ARMD1_UART3_BASE)
- writel(UARTCLK14745KHZ, &apb1clkres->uart3);
-#elif (CONFIG_SYS_NS16550_COM1 == ARMD1_UART2_BASE)
- writel(UARTCLK14745KHZ, &apb1clkres->uart2);
-#else
- writel(UARTCLK14745KHZ, &apb1clkres->uart1);
-#endif
- icache_enable();
-
- return 0;
-}
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
- u32 id;
- struct armd1cpu_registers *cpuregs =
- (struct armd1cpu_registers *) ARMD1_CPU_BASE;
-
- id = readl(&cpuregs->chip_id);
- printf("SoC: Armada 88AP%X-%X\n", (id & 0xFFF), (id >> 0x10));
- return 0;
-}
-#endif
-
-#ifdef CONFIG_I2C_MV
-void i2c_clk_enable(void)
-{
-}
-#endif
diff --git a/arch/arm/cpu/arm926ejs/armada100/dram.c b/arch/arm/cpu/arm926ejs/armada100/dram.c
deleted file mode 100644
index c97b5b1..0000000
--- a/arch/arm/cpu/arm926ejs/armada100/dram.c
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>,
- * Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/arch/armada100.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * ARMADA100 DRAM controller supports upto 8 banks
- * for chip select 0 and 1
- */
-
-/*
- * DDR Memory Control Registers
- * Refer Datasheet Appendix A.17
- */
-struct armd1ddr_map_registers {
- u32 cs; /* Memory Address Map Register -CS */
- u32 pad[3];
-};
-
-struct armd1ddr_registers {
- u8 pad[0x100 - 0x000];
- struct armd1ddr_map_registers mmap[2];
-};
-
-/*
- * armd1_sdram_base - reads SDRAM Base Address Register
- */
-u32 armd1_sdram_base(int chip_sel)
-{
- struct armd1ddr_registers *ddr_regs =
- (struct armd1ddr_registers *)ARMD1_DRAM_BASE;
- u32 result = 0;
- u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs);
-
- if (!CS_valid)
- return 0;
-
- result = readl(&ddr_regs->mmap[chip_sel].cs) & 0xFF800000;
- return result;
-}
-
-/*
- * armd1_sdram_size - reads SDRAM size
- */
-u32 armd1_sdram_size(int chip_sel)
-{
- struct armd1ddr_registers *ddr_regs =
- (struct armd1ddr_registers *)ARMD1_DRAM_BASE;
- u32 result = 0;
- u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs);
-
- if (!CS_valid)
- return 0;
-
- result = readl(&ddr_regs->mmap[chip_sel].cs);
- result = (result >> 16) & 0xF;
- if (result < 0x7) {
- printf("Unknown DRAM Size\n");
- return -1;
- } else {
- return ((0x8 << (result - 0x7)) * 1024 * 1024);
- }
-}
-
-int dram_init(void)
-{
- int i;
-
- gd->ram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- gd->bd->bi_dram[i].start = armd1_sdram_base(i);
- gd->bd->bi_dram[i].size = armd1_sdram_size(i);
- /*
- * It is assumed that all memory banks are consecutive
- * and without gaps.
- * If the gap is found, ram_size will be reported for
- * consecutive memory only
- */
- if (gd->bd->bi_dram[i].start != gd->ram_size)
- break;
-
- gd->ram_size += gd->bd->bi_dram[i].size;
-
- }
-
- for (; i < CONFIG_NR_DRAM_BANKS; i++) {
- /* If above loop terminated prematurely, we need to set
- * remaining banks' start address & size as 0. Otherwise other
- * u-boot functions and Linux kernel gets wrong values which
- * could result in crash */
- gd->bd->bi_dram[i].start = 0;
- gd->bd->bi_dram[i].size = 0;
- }
- return 0;
-}
-
-/*
- * If this function is not defined here,
- * board.c alters dram bank zero configuration defined above.
- */
-int dram_init_banksize(void)
-{
- dram_init();
-
- return 0;
-}
diff --git a/arch/arm/cpu/arm926ejs/armada100/timer.c b/arch/arm/cpu/arm926ejs/armada100/timer.c
deleted file mode 100644
index 4b96d4a..0000000
--- a/arch/arm/cpu/arm926ejs/armada100/timer.c
+++ /dev/null
@@ -1,198 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <init.h>
-#include <time.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/armada100.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-
-/*
- * Timer registers
- * Refer Section A.6 in Datasheet
- */
-struct armd1tmr_registers {
- u32 clk_ctrl; /* Timer clk control reg */
- u32 match[9]; /* Timer match registers */
- u32 count[3]; /* Timer count registers */
- u32 status[3];
- u32 ie[3];
- u32 preload[3]; /* Timer preload value */
- u32 preload_ctrl[3];
- u32 wdt_match_en;
- u32 wdt_match_r;
- u32 wdt_val;
- u32 wdt_sts;
- u32 icr[3];
- u32 wdt_icr;
- u32 cer; /* Timer count enable reg */
- u32 cmr;
- u32 ilr[3];
- u32 wcr;
- u32 wfar;
- u32 wsar;
- u32 cvwr;
-};
-
-#define TIMER 0 /* Use TIMER 0 */
-/* Each timer has 3 match registers */
-#define MATCH_CMP(x) ((3 * TIMER) + x)
-#define TIMER_LOAD_VAL 0xffffffff
-#define COUNT_RD_REQ 0x1
-
-DECLARE_GLOBAL_DATA_PTR;
-/* Using gd->arch.tbu from timestamp and gd->arch.tbl for lastdec */
-
-/* For preventing risk of instability in reading counter value,
- * first set read request to register cvwr and then read same
- * register after it captures counter value.
- */
-ulong read_timer(void)
-{
- struct armd1tmr_registers *armd1timers =
- (struct armd1tmr_registers *) ARMD1_TIMER_BASE;
- volatile int loop=100;
-
- writel(COUNT_RD_REQ, &armd1timers->cvwr);
- while (loop--);
- return(readl(&armd1timers->cvwr));
-}
-
-static ulong get_timer_masked(void)
-{
- ulong now = read_timer();
-
- if (now >= gd->arch.tbl) {
- /* normal mode */
- gd->arch.tbu += now - gd->arch.tbl;
- } else {
- /* we have an overflow ... */
- gd->arch.tbu += now + TIMER_LOAD_VAL - gd->arch.tbl;
- }
- gd->arch.tbl = now;
-
- return gd->arch.tbu;
-}
-
-ulong get_timer(ulong base)
-{
- return ((get_timer_masked() / (CONFIG_SYS_HZ_CLOCK / 1000)) -
- base);
-}
-
-void __udelay(unsigned long usec)
-{
- ulong delayticks;
- ulong endtime;
-
- delayticks = (usec * (CONFIG_SYS_HZ_CLOCK / 1000000));
- endtime = get_timer_masked() + delayticks;
-
- while (get_timer_masked() < endtime);
-}
-
-/*
- * init the Timer
- */
-int timer_init(void)
-{
- struct armd1apb1_registers *apb1clkres =
- (struct armd1apb1_registers *) ARMD1_APBC1_BASE;
- struct armd1tmr_registers *armd1timers =
- (struct armd1tmr_registers *) ARMD1_TIMER_BASE;
-
- /* Enable Timer clock at 3.25 MHZ */
- writel(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3), &apb1clkres->timers);
-
- /* load value into timer */
- writel(0x0, &armd1timers->clk_ctrl);
- /* Use Timer 0 Match Resiger 0 */
- writel(TIMER_LOAD_VAL, &armd1timers->match[MATCH_CMP(0)]);
- /* Preload value is 0 */
- writel(0x0, &armd1timers->preload[TIMER]);
- /* Enable match comparator 0 for Timer 0 */
- writel(0x1, &armd1timers->preload_ctrl[TIMER]);
-
- /* Enable timer 0 */
- writel(0x1, &armd1timers->cer);
- /* init the gd->arch.tbu and gd->arch.tbl value */
- gd->arch.tbl = read_timer();
- gd->arch.tbu = 0;
-
- return 0;
-}
-
-#define MPMU_APRR_WDTR (1<<4)
-#define TMR_WFAR 0xbaba /* WDT Register First key */
-#define TMP_WSAR 0xeb10 /* WDT Register Second key */
-
-/*
- * This function uses internal Watchdog Timer
- * based reset mechanism.
- * Steps to write watchdog registers (protected access)
- * 1. Write key value to TMR_WFAR reg.
- * 2. Write key value to TMP_WSAR reg.
- * 3. Perform write operation.
- */
-void reset_cpu(void)
-{
- struct armd1mpmu_registers *mpmu =
- (struct armd1mpmu_registers *) ARMD1_MPMU_BASE;
- struct armd1tmr_registers *armd1timers =
- (struct armd1tmr_registers *) ARMD1_TIMER_BASE;
- u32 val;
-
- /* negate hardware reset to the WDT after system reset */
- val = readl(&mpmu->aprr);
- val = val | MPMU_APRR_WDTR;
- writel(val, &mpmu->aprr);
-
- /* reset/enable WDT clock */
- writel(APBC_APBCLK | APBC_FNCLK | APBC_RST, &mpmu->wdtpcr);
- readl(&mpmu->wdtpcr);
- writel(APBC_APBCLK | APBC_FNCLK, &mpmu->wdtpcr);
- readl(&mpmu->wdtpcr);
-
- /* clear previous WDT status */
- writel(TMR_WFAR, &armd1timers->wfar);
- writel(TMP_WSAR, &armd1timers->wsar);
- writel(0, &armd1timers->wdt_sts);
-
- /* set match counter */
- writel(TMR_WFAR, &armd1timers->wfar);
- writel(TMP_WSAR, &armd1timers->wsar);
- writel(0xf, &armd1timers->wdt_match_r);
-
- /* enable WDT reset */
- writel(TMR_WFAR, &armd1timers->wfar);
- writel(TMP_WSAR, &armd1timers->wsar);
- writel(0x3, &armd1timers->wdt_match_en);
-
- while(1);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
- return (ulong)CONFIG_SYS_HZ;
-}
diff --git a/arch/arm/include/asm/arch-armada100/armada100.h b/arch/arm/include/asm/arch-armada100/armada100.h
deleted file mode 100644
index dd21ad3..0000000
--- a/arch/arm/include/asm/arch-armada100/armada100.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#ifndef _ASM_ARCH_ARMADA100_H
-#define _ASM_ARCH_ARMADA100_H
-
-#if defined (CONFIG_ARMADA100)
-
-/* Common APB clock register bit definitions */
-#define APBC_APBCLK (1<<0) /* APB Bus Clock Enable */
-#define APBC_FNCLK (1<<1) /* Functional Clock Enable */
-#define APBC_RST (1<<2) /* Reset Generation */
-/* Functional Clock Selection Mask */
-#define APBC_FNCLKSEL(x) (((x) & 0xf) << 4)
-
-/* Fast Ethernet Controller Clock register definition */
-#define FE_CLK_RST 0x1
-#define FE_CLK_ENA 0x8
-
-/* SSP2 Clock Control */
-#define SSP2_APBCLK 0x01
-#define SSP2_FNCLK 0x02
-
-/* USB Clock/reset control bits */
-#define USB_SPH_AXICLK_EN 0x10
-#define USB_SPH_AXI_RST 0x02
-
-/* MPMU Clocks */
-#define APB2_26M_EN (1 << 20)
-#define AP_26M (1 << 4)
-
-/* Register Base Addresses */
-#define ARMD1_DRAM_BASE 0xB0000000
-#define ARMD1_FEC_BASE 0xC0800000
-#define ARMD1_TIMER_BASE 0xD4014000
-#define ARMD1_APBC1_BASE 0xD4015000
-#define ARMD1_APBC2_BASE 0xD4015800
-#define ARMD1_UART1_BASE 0xD4017000
-#define ARMD1_UART2_BASE 0xD4018000
-#define ARMD1_GPIO_BASE 0xD4019000
-#define ARMD1_SSP1_BASE 0xD401B000
-#define ARMD1_SSP2_BASE 0xD401C000
-#define ARMD1_MFPR_BASE 0xD401E000
-#define ARMD1_SSP3_BASE 0xD401F000
-#define ARMD1_SSP4_BASE 0xD4020000
-#define ARMD1_SSP5_BASE 0xD4021000
-#define ARMD1_UART3_BASE 0xD4026000
-#define ARMD1_MPMU_BASE 0xD4050000
-#define ARMD1_USB_HOST_BASE 0xD4209000
-#define ARMD1_APMU_BASE 0xD4282800
-#define ARMD1_CPU_BASE 0xD4282C00
-
-#endif /* CONFIG_ARMADA100 */
-#endif /* _ASM_ARCH_ARMADA100_H */
diff --git a/arch/arm/include/asm/arch-armada100/config.h b/arch/arm/include/asm/arch-armada100/config.h
deleted file mode 100644
index 2862dd0..0000000
--- a/arch/arm/include/asm/arch-armada100/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Lei Wen <leiwen@marvell.com>
- */
-
-/*
- * This file should be included in board config header file.
- *
- * It supports common definitions for Armada100 platform
- */
-
-#ifndef _ARMD1_CONFIG_H
-#define _ARMD1_CONFIG_H
-
-#include <asm/arch/armada100.h>
-
-#define CONFIG_SYS_TCLK (14745600) /* NS16550 clk config */
-#define CONFIG_SYS_HZ_CLOCK (3250000) /* Timer Freq. 3.25MHZ */
-#define CONFIG_MARVELL_MFP /* Enable mvmfp driver */
-#define MV_MFPR_BASE ARMD1_MFPR_BASE
-#define MV_UART_CONSOLE_BASE ARMD1_UART1_BASE
-#define CONFIG_SYS_NS16550_IER (1 << 6) /* Bit 6 in UART_IER register
- represents UART Unit Enable */
-
-#endif /* _ARMD1_CONFIG_H */
diff --git a/arch/arm/include/asm/arch-armada100/cpu.h b/arch/arm/include/asm/arch-armada100/cpu.h
deleted file mode 100644
index cd5e505..0000000
--- a/arch/arm/include/asm/arch-armada100/cpu.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>, Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#ifndef _ARMADA100CPU_H
-#define _ARMADA100CPU_H
-
-#include <asm/io.h>
-#include <asm/system.h>
-
-/*
- * Main Power Management (MPMU) Registers
- * Refer Datasheet Appendix A.8
- */
-struct armd1mpmu_registers {
- u8 pad0[0x08 - 0x00];
- u32 fccr; /*0x0008*/
- u32 pocr; /*0x000c*/
- u32 posr; /*0x0010*/
- u32 succr; /*0x0014*/
- u8 pad1[0x030 - 0x014 - 4];
- u32 gpcr; /*0x0030*/
- u8 pad2[0x200 - 0x030 - 4];
- u32 wdtpcr; /*0x0200*/
- u8 pad3[0x1000 - 0x200 - 4];
- u32 apcr; /*0x1000*/
- u32 apsr; /*0x1004*/
- u8 pad4[0x1020 - 0x1004 - 4];
- u32 aprr; /*0x1020*/
- u32 acgr; /*0x1024*/
- u32 arsr; /*0x1028*/
-};
-
-/*
- * Application Subsystem Power Management
- * Refer Datasheet Appendix A.9
- */
-struct armd1apmu_registers {
- u32 pcr; /* 0x000 */
- u32 ccr; /* 0x004 */
- u32 pad1;
- u32 ccsr; /* 0x00C */
- u32 fc_timer; /* 0x010 */
- u32 pad2;
- u32 ideal_cfg; /* 0x018 */
- u8 pad3[0x04C - 0x018 - 4];
- u32 lcdcrc; /* 0x04C */
- u32 cciccrc; /* 0x050 */
- u32 sd1crc; /* 0x054 */
- u32 sd2crc; /* 0x058 */
- u32 usbcrc; /* 0x05C */
- u32 nfccrc; /* 0x060 */
- u32 dmacrc; /* 0x064 */
- u32 pad4;
- u32 buscrc; /* 0x06C */
- u8 pad5[0x07C - 0x06C - 4];
- u32 wake_clr; /* 0x07C */
- u8 pad6[0x090 - 0x07C - 4];
- u32 core_status; /* 0x090 */
- u32 rfsc; /* 0x094 */
- u32 imr; /* 0x098 */
- u32 irwc; /* 0x09C */
- u32 isr; /* 0x0A0 */
- u8 pad7[0x0B0 - 0x0A0 - 4];
- u32 mhst; /* 0x0B0 */
- u32 msr; /* 0x0B4 */
- u8 pad8[0x0C0 - 0x0B4 - 4];
- u32 msst; /* 0x0C0 */
- u32 pllss; /* 0x0C4 */
- u32 smb; /* 0x0C8 */
- u32 gccrc; /* 0x0CC */
- u8 pad9[0x0D4 - 0x0CC - 4];
- u32 smccrc; /* 0x0D4 */
- u32 pad10;
- u32 xdcrc; /* 0x0DC */
- u32 sd3crc; /* 0x0E0 */
- u32 sd4crc; /* 0x0E4 */
- u8 pad11[0x0F0 - 0x0E4 - 4];
- u32 cfcrc; /* 0x0F0 */
- u32 mspcrc; /* 0x0F4 */
- u32 cmucrc; /* 0x0F8 */
- u32 fecrc; /* 0x0FC */
- u32 pciecrc; /* 0x100 */
- u32 epdcrc; /* 0x104 */
-};
-
-/*
- * APB1 Clock Reset/Control Registers
- * Refer Datasheet Appendix A.10
- */
-struct armd1apb1_registers {
- u32 uart1; /*0x000*/
- u32 uart2; /*0x004*/
- u32 gpio; /*0x008*/
- u32 pwm1; /*0x00c*/
- u32 pwm2; /*0x010*/
- u32 pwm3; /*0x014*/
- u32 pwm4; /*0x018*/
- u8 pad0[0x028 - 0x018 - 4];
- u32 rtc; /*0x028*/
- u32 twsi0; /*0x02c*/
- u32 kpc; /*0x030*/
- u32 timers; /*0x034*/
- u8 pad1[0x03c - 0x034 - 4];
- u32 aib; /*0x03c*/
- u32 sw_jtag; /*0x040*/
- u32 timer1; /*0x044*/
- u32 onewire; /*0x048*/
- u8 pad2[0x050 - 0x048 - 4];
- u32 asfar; /*0x050 AIB Secure First Access Reg*/
- u32 assar; /*0x054 AIB Secure Second Access Reg*/
- u8 pad3[0x06c - 0x054 - 4];
- u32 twsi1; /*0x06c*/
- u32 uart3; /*0x070*/
- u8 pad4[0x07c - 0x070 - 4];
- u32 timer2; /*0x07C*/
- u8 pad5[0x084 - 0x07c - 4];
- u32 ac97; /*0x084*/
-};
-
-/*
-* APB2 Clock Reset/Control Registers
-* Refer Datasheet Appendix A.11
-*/
-struct armd1apb2_registers {
- u32 pad1[0x01C - 0x000];
- u32 ssp1_clkrst; /* 0x01C */
- u32 ssp2_clkrst; /* 0x020 */
- u32 pad2[0x04C - 0x020 - 4];
- u32 ssp3_clkrst; /* 0x04C */
- u32 pad3[0x058 - 0x04C - 4];
- u32 ssp4_clkrst; /* 0x058 */
- u32 ssp5_clkrst; /* 0x05C */
-};
-
-/*
- * CPU Interface Registers
- * Refer Datasheet Appendix A.2
- */
-struct armd1cpu_registers {
- u32 chip_id; /* Chip Id Reg */
- u32 pad;
- u32 cpu_conf; /* CPU Conf Reg */
- u32 pad1;
- u32 cpu_sram_spd; /* CPU SRAM Speed Reg */
- u32 pad2;
- u32 cpu_l2c_spd; /* CPU L2cache Speed Conf */
- u32 mcb_conf; /* MCB Conf Reg */
- u32 sys_boot_ctl; /* Sytem Boot Control */
-};
-
-/*
- * Functions
- */
-u32 armd1_sdram_base(int);
-u32 armd1_sdram_size(int);
-
-#endif /* _ARMADA100CPU_H */
diff --git a/arch/arm/include/asm/arch-armada100/gpio.h b/arch/arm/include/asm/arch-armada100/gpio.h
deleted file mode 100644
index b85f6a5..0000000
--- a/arch/arm/include/asm/arch-armada100/gpio.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <contact@8051projects.net>
- *
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- */
-
-#ifndef _ASM_ARCH_GPIO_H
-#define _ASM_ARCH_GPIO_H
-
-#include <asm/types.h>
-#include <asm/arch/armada100.h>
-
-#define GPIO_HIGH 1
-#define GPIO_LOW 0
-
-#define GPIO_TO_REG(gp) (gp >> 5)
-#define GPIO_TO_BIT(gp) (1 << (gp & 0x1F))
-#define GPIO_VAL(gp, val) ((val >> (gp & 0x1F)) & 0x01)
-
-static inline void *get_gpio_base(int bank)
-{
- const unsigned int offset[4] = {0, 4, 8, 0x100};
- /* gpio register bank offset - refer Appendix A.36 */
- return (struct gpio_reg *)(ARMD1_GPIO_BASE + offset[bank]);
-}
-
-#endif /* _ASM_ARCH_GPIO_H */
diff --git a/arch/arm/include/asm/arch-armada100/mfp.h b/arch/arm/include/asm/arch-armada100/mfp.h
deleted file mode 100644
index cd837ea..0000000
--- a/arch/arm/include/asm/arch-armada100/mfp.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Based on linux/arch/arm/mach-mpp/include/mfp-pxa168.h
- * (C) Copyright 2007
- * Marvell Semiconductor <www.marvell.com>
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#ifndef __ARMADA100_MFP_H
-#define __ARMADA100_MFP_H
-
-/*
- * Frequently used MFP Configuration macros for all ARMADA100 family of SoCs
- *
- * offset, pull,pF, drv,dF, edge,eF ,afn,aF
- */
-/* UART1 */
-#define MFP107_UART1_TXD (MFP_REG(0x01ac) | MFP_AF1 | MFP_DRIVE_FAST)
-#define MFP107_UART1_RXD (MFP_REG(0x01ac) | MFP_AF2 | MFP_DRIVE_FAST)
-#define MFP108_UART1_RXD (MFP_REG(0x01b0) | MFP_AF1 | MFP_DRIVE_FAST)
-#define MFP108_UART1_TXD (MFP_REG(0x01b0) | MFP_AF2 | MFP_DRIVE_FAST)
-#define MFP109_UART1_CTS (MFP_REG(0x01b4) | MFP_AF1 | MFP_DRIVE_MEDIUM)
-#define MFP109_UART1_RTS (MFP_REG(0x01b4) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-#define MFP110_UART1_RTS (MFP_REG(0x01b8) | MFP_AF1 | MFP_DRIVE_MEDIUM)
-#define MFP110_UART1_CTS (MFP_REG(0x01b8) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-#define MFP111_UART1_RI (MFP_REG(0x01bc) | MFP_AF1 | MFP_DRIVE_MEDIUM)
-#define MFP111_UART1_DSR (MFP_REG(0x01bc) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-#define MFP112_UART1_DTR (MFP_REG(0x01c0) | MFP_AF1 | MFP_DRIVE_MEDIUM)
-#define MFP112_UART1_DCD (MFP_REG(0x01c0) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-
-/* UART2 */
-#define MFP47_UART2_RXD (MFP_REG(0x0028) | MFP_AF6 | MFP_DRIVE_MEDIUM)
-#define MFP48_UART2_TXD (MFP_REG(0x002c) | MFP_AF6 | MFP_DRIVE_MEDIUM)
-#define MFP88_UART2_RXD (MFP_REG(0x0160) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-#define MFP89_UART2_TXD (MFP_REG(0x0164) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-
-/* UART3 */
-#define MFPO8_UART3_TXD (MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-#define MFPO9_UART3_RXD (MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-
-/* I2c */
-#define MFP105_CI2C_SDA (MFP_REG(0x1a4) | MFP_AF1 | MFP_DRIVE_MEDIUM)
-#define MFP106_CI2C_SCL (MFP_REG(0x1a8) | MFP_AF1 | MFP_DRIVE_MEDIUM)
-
-/* Fast Ethernet */
-#define MFP086_ETH_TXCLK (MFP_REG(0x158) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP087_ETH_TXEN (MFP_REG(0x15C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP088_ETH_TXDQ3 (MFP_REG(0x160) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP089_ETH_TXDQ2 (MFP_REG(0x164) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP090_ETH_TXDQ1 (MFP_REG(0x168) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP091_ETH_TXDQ0 (MFP_REG(0x16C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP092_ETH_CRS (MFP_REG(0x170) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP093_ETH_COL (MFP_REG(0x174) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP094_ETH_RXCLK (MFP_REG(0x178) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP095_ETH_RXER (MFP_REG(0x17C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP096_ETH_RXDQ3 (MFP_REG(0x180) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP097_ETH_RXDQ2 (MFP_REG(0x184) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP098_ETH_RXDQ1 (MFP_REG(0x188) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP099_ETH_RXDQ0 (MFP_REG(0x18C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP100_ETH_MDC (MFP_REG(0x190) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP101_ETH_MDIO (MFP_REG(0x194) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-#define MFP103_ETH_RXDV (MFP_REG(0x19C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
-
-/* SPI */
-#define MFP107_SSP2_RXD (MFP_REG(0x1AC) | MFP_AF4 | MFP_DRIVE_MEDIUM)
-#define MFP108_SSP2_TXD (MFP_REG(0x1B0) | MFP_AF4 | MFP_DRIVE_MEDIUM)
-#define MFP110_SSP2_CS (MFP_REG(0x1B8) | MFP_AF0 | MFP_DRIVE_MEDIUM)
-#define MFP111_SSP2_CLK (MFP_REG(0x1BC) | MFP_AF4 | MFP_DRIVE_MEDIUM)
-
-/* More macros can be defined here... */
-
-#define MFP_PIN_MAX 117
-
-#endif /* __ARMADA100_MFP_H */
diff --git a/arch/arm/include/asm/arch-armada100/spi.h b/arch/arm/include/asm/arch-armada100/spi.h
deleted file mode 100644
index 873ba6e..0000000
--- a/arch/arm/include/asm/arch-armada100/spi.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <contact@8051projects.net>
- *
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- */
-
-#ifndef __ARMADA100_SPI_H_
-#define __ARMADA100_SPI_H_
-
-#include <asm/arch/armada100.h>
-
-#define CAT_BASE_ADDR(x) ARMD1_SSP ## x ## _BASE
-#define SSP_REG_BASE(x) CAT_BASE_ADDR(x)
-
-/*
- * SSP Serial Port Registers
- * refer Appendix A.26
- */
-struct ssp_reg {
- u32 sscr0; /* SSP Control Register 0 - 0x000 */
- u32 sscr1; /* SSP Control Register 1 - 0x004 */
- u32 sssr; /* SSP Status Register - 0x008 */
- u32 ssitr; /* SSP Interrupt Test Register - 0x00C */
- u32 ssdr; /* SSP Data Register - 0x010 */
- u32 pad1[5];
- u32 ssto; /* SSP Timeout Register - 0x028 */
- u32 sspsp; /* SSP Programmable Serial Protocol Register - 0x02C */
- u32 sstsa; /* SSP TX Timeslot Active Register - 0x030 */
- u32 ssrsa; /* SSP RX Timeslot Active Register - 0x034 */
- u32 sstss; /* SSP Timeslot Status Register - 0x038 */
-};
-
-#define DEFAULT_WORD_LEN 8
-#define SSP_FLUSH_NUM 0x2000
-#define RX_THRESH_DEF 8
-#define TX_THRESH_DEF 8
-#define TIMEOUT_DEF 1000
-
-#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */
-#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */
-#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */
-#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity
- setting */
-#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
-#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */
-#define SSCR1_TFT 0x03c0 /* Transmit FIFO Threshold (mask) */
-#define SSCR1_RFT 0x3c00 /* Receive FIFO Threshold (mask) */
-
-#define SSCR1_TXTRESH(x) ((x - 1) << 6) /* level [1..16] */
-#define SSCR1_RXTRESH(x) ((x - 1) << 10) /* level [1..16] */
-#define SSCR1_TINTE (1 << 19) /* Receiver Time-out
- Interrupt enable */
-
-#define SSCR0_DSS 0x0f /* Data Size Select (mask) */
-#define SSCR0_DATASIZE(x) (x - 1) /* Data Size Select [4..16] */
-#define SSCR0_FRF 0x30 /* FRame Format (mask) */
-#define SSCR0_MOTO (0x0 << 4) /* Motorola's Serial
- Peripheral Interface */
-#define SSCR0_TI (0x1 << 4) /* TI's Synchronous
- Serial Protocol (SSP) */
-#define SSCR0_NATIONAL (0x2 << 4) /* National Microwire */
-#define SSCR0_ECS (1 << 6) /* External clock select */
-#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port
- Enable */
-
-#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
-#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
-#define SSSR_BSY (1 << 4) /* SSP Busy */
-#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */
-#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
-#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */
-#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */
-
-#endif /* __ARMADA100_SPI_H_ */
diff --git a/arch/arm/include/asm/arch-armada100/utmi-armada100.h b/arch/arm/include/asm/arch-armada100/utmi-armada100.h
deleted file mode 100644
index 28147f4..0000000
--- a/arch/arm/include/asm/arch-armada100/utmi-armada100.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2012
- * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <contact@8051projects.net>
- *
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- */
-
-#ifndef __UTMI_ARMADA100__
-#define __UTMI_ARMADA100__
-
-#define UTMI_PHY_BASE 0xD4206000
-
-/* utmi_ctrl - bits */
-#define INPKT_DELAY_SOF (1 << 28)
-#define PLL_PWR_UP 2
-#define PHY_PWR_UP 1
-
-/* utmi_pll - bits */
-#define PLL_FBDIV_MASK 0x00000FF0
-#define PLL_FBDIV 4
-#define PLL_REFDIV_MASK 0x0000000F
-#define PLL_REFDIV 0
-#define PLL_READY 0x800000
-#define VCOCAL_START (1 << 21)
-
-#define N_DIVIDER 0xEE
-#define M_DIVIDER 0x0B
-
-/* utmi_tx - bits */
-#define CK60_PHSEL 17
-#define PHSEL_VAL 0x4
-#define RCAL_START (1 << 12)
-
-/*
- * USB PHY registers
- * Refer Datasheet Appendix A.21
- */
-struct armd1usb_phy_reg {
- u32 utmi_rev; /* USB PHY Revision */
- u32 utmi_ctrl; /* USB PHY Control register */
- u32 utmi_pll; /* PLL register */
- u32 utmi_tx; /* Tx register */
- u32 utmi_rx; /* Rx register */
- u32 utmi_ivref; /* IVREF register */
- u32 utmi_tst_g0; /* Test group 0 register */
- u32 utmi_tst_g1; /* Test group 1 register */
- u32 utmi_tst_g2; /* Test group 2 register */
- u32 utmi_tst_g3; /* Test group 3 register */
- u32 utmi_tst_g4; /* Test group 4 register */
- u32 utmi_tst_g5; /* Test group 5 register */
- u32 utmi_reserve; /* Reserve Register */
- u32 utmi_usb_int; /* USB interuppt register */
- u32 utmi_dbg_ctl; /* Debug control register */
- u32 utmi_otg_addon; /* OTG addon register */
-};
-
-int utmi_init(void);
-
-#endif /* __UTMI_ARMADA100__ */
diff --git a/board/Marvell/aspenite/Kconfig b/board/Marvell/aspenite/Kconfig
deleted file mode 100644
index 4dd49c4..0000000
--- a/board/Marvell/aspenite/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_ASPENITE
-
-config SYS_BOARD
- default "aspenite"
-
-config SYS_VENDOR
- default "Marvell"
-
-config SYS_SOC
- default "armada100"
-
-config SYS_CONFIG_NAME
- default "aspenite"
-
-endif
diff --git a/board/Marvell/aspenite/MAINTAINERS b/board/Marvell/aspenite/MAINTAINERS
deleted file mode 100644
index a77d30e..0000000
--- a/board/Marvell/aspenite/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ASPENITE BOARD
-M: Prafulla Wadaskar <prafulla@marvell.com>
-S: Maintained
-F: board/Marvell/aspenite/
-F: include/configs/aspenite.h
-F: configs/aspenite_defconfig
diff --git a/board/Marvell/aspenite/Makefile b/board/Marvell/aspenite/Makefile
deleted file mode 100644
index f67a978..0000000
--- a/board/Marvell/aspenite/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2010
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
-# Contributor: Mahavir Jain <mjain@marvell.com>
-
-obj-y := aspenite.o
diff --git a/board/Marvell/aspenite/aspenite.c b/board/Marvell/aspenite/aspenite.c
deleted file mode 100644
index 1f9389c..0000000
--- a/board/Marvell/aspenite/aspenite.c
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#include <common.h>
-#include <init.h>
-#include <mvmfp.h>
-#include <asm/global_data.h>
-#include <asm/mach-types.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/armada100.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
- u32 mfp_cfg[] = {
- /* I2C */
- MFP105_CI2C_SDA,
- MFP106_CI2C_SCL,
-
- /* Enable Console on UART1 */
- MFP107_UART1_RXD,
- MFP108_UART1_TXD,
-
- MFP_EOC /*End of configureation*/
- };
- /* configure MFP's */
- mfp_config(mfp_cfg);
- return 0;
-}
-
-int board_init(void)
-{
- /* arch number of Board */
- gd->bd->bi_arch_number = MACH_TYPE_ASPENITE;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = armd1_sdram_base(0) + 0x100;
- return 0;
-}
diff --git a/configs/aspenite_defconfig b/configs/aspenite_defconfig
deleted file mode 100644
index b85f724..0000000
--- a/configs/aspenite_defconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SKIP_LOWLEVEL_INIT=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_ASPENITE=y
-CONFIG_SYS_TEXT_BASE=0x600000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_ENV_SIZE=0x20000
-CONFIG_IDENT_STRING="\nMarvell-Aspenite DB"
-CONFIG_SYS_LOAD_ADDR=0x800000
-CONFIG_BOOTDELAY=3
-CONFIG_USE_PREBOOT=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-# CONFIG_NET is not set
-# CONFIG_MMC is not set
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 1891748..a9dc546 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_IPROC_GPIO) += iproc_gpio.o
obj-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
obj-$(CONFIG_KONA_GPIO) += kona_gpio.o
obj-$(CONFIG_MARVELL_GPIO) += mvgpio.o
-obj-$(CONFIG_MARVELL_MFP) += mvmfp.o
obj-$(CONFIG_MCP230XX_GPIO) += mcp230xx_gpio.o
obj-$(CONFIG_MXC_GPIO) += mxc_gpio.o
obj-$(CONFIG_MXS_GPIO) += mxs_gpio.o
diff --git a/drivers/gpio/mvmfp.c b/drivers/gpio/mvmfp.c
deleted file mode 100644
index 511042c..0000000
--- a/drivers/gpio/mvmfp.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>,
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <mvmfp.h>
-#include <asm/arch/mfp.h>
-
-/*
- * mfp_config
- *
- * On most of Marvell SoCs (ex. ARMADA100) there is Multi-Funtion-Pin
- * configuration registers to configure each GPIO/Function pin on the
- * SoC.
- *
- * This function reads the array of values for
- * MFPR_X registers and programms them into respective
- * Multi-Function Pin registers.
- * It supports - Alternate Function Selection programming.
- *
- * Whereas,
- * The Configureation value is constructed using MFP()
- * array consists of 32bit values as defined in MFP(xx,xx..) macro
- */
-void mfp_config(u32 *mfp_cfgs)
-{
- u32 *p_mfpr = NULL;
- u32 cfg_val, val;
-
- do {
- cfg_val = *mfp_cfgs++;
- /* exit if End of configuration table detected */
- if (cfg_val == MFP_EOC)
- break;
-
- p_mfpr = (u32 *)(MV_MFPR_BASE
- + MFP_REG_GET_OFFSET(cfg_val));
-
- /* Write a mfg register as per configuration */
- val = 0;
- if (cfg_val & MFP_VALUE_MASK)
- val |= cfg_val & MFP_VALUE_MASK;
-
- writel(val, p_mfpr);
- } while (1);
- /*
- * perform a read-back of any MFPR register to make sure the
- * previous writings are finished
- */
- readl(p_mfpr);
-}
diff --git a/drivers/mmc/mv_sdhci.c b/drivers/mmc/mv_sdhci.c
index 591137f..336ebf1 100644
--- a/drivers/mmc/mv_sdhci.c
+++ b/drivers/mmc/mv_sdhci.c
@@ -44,29 +44,6 @@ static void sdhci_mvebu_mbus_config(void __iomem *base)
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
static struct sdhci_ops mv_ops;
-
-#if defined(CONFIG_SHEEVA_88SV331xV5)
-#define SD_CE_ATA_2 0xEA
-#define MMC_CARD 0x1000
-#define MMC_WIDTH 0x0100
-static inline void mv_sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
-{
- struct mmc *mmc = host->mmc;
- u32 ata = (unsigned long)host->ioaddr + SD_CE_ATA_2;
-
- if (!IS_SD(mmc) && reg == SDHCI_HOST_CONTROL) {
- if (mmc->bus_width == 8)
- writew(readw(ata) | (MMC_CARD | MMC_WIDTH), ata);
- else
- writew(readw(ata) & ~(MMC_CARD | MMC_WIDTH), ata);
- }
-
- writeb(val, host->ioaddr + reg);
-}
-
-#else
-#define mv_sdhci_writeb NULL
-#endif /* CONFIG_SHEEVA_88SV331xV5 */
#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */
int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks)
@@ -84,7 +61,6 @@ int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks)
host->max_clk = max_clk;
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
memset(&mv_ops, 0, sizeof(struct sdhci_ops));
- mv_ops.write_b = mv_sdhci_writeb;
host->ops = &mv_ops;
#endif
diff --git a/include/configs/aspenite.h b/include/configs/aspenite.h
deleted file mode 100644
index 4a25d56..0000000
--- a/include/configs/aspenite.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#ifndef __CONFIG_ASPENITE_H
-#define __CONFIG_ASPENITE_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
-#define CONFIG_ARMADA100 1 /* SOC Family Name */
-
-/*
- * There is no internal RAM in ARMADA100, using DRAM
- * TBD: dcache to be used for this
- */
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
-
-#include "mv-common.h"
-
-/*
- * Environment variables configurations
- */
-
-#endif /* __CONFIG_ASPENITE_H */