Merge git://git.denx.de/u-boot-fsl-qoriq

24 files changed, 603 insertions, 60 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dde422b..22234cd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1034,6 +1034,19 @@ config TARGET_LS1012A2G5RDB
 	  development platform that supports the QorIQ LS1012A
 	  Layerscape Architecture processor.
 
+config TARGET_LS1012AFRWY
+	bool "Support ls1012afrwy"
+	select ARCH_LS1012A
+	select BOARD_LATE_INIT
+	select ARM64
+	imply SCSI
+	imply SCSI_AHCI
+	help
+	 Support for Freescale LS1012AFRWY platform.
+	 The LS1012A FRWY board (FRWY) is a high-performance
+	 development platform that supports the QorIQ LS1012A
+	 Layerscape Architecture processor.
+
 config TARGET_LS1012AFRDM
 	bool "Support ls1012afrdm"
 	select ARCH_LS1012A
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 3a0e129..22d2f29 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -91,6 +91,7 @@ config PSCI_RESET
 		   !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
 		   !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
 		   !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
+		   !TARGET_LS1012AFRWY && \
 		   !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
 		   !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
 		   !TARGET_LS2081ARDB && \
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 546de33..f2111fa 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -261,40 +261,6 @@ config SYS_LS_PPA_FW_IN_NAND
 
 endchoice
 
-config SYS_LS_PPA_FW_ADDR
-	hex "Address of PPA firmware loading from"
-	depends on FSL_LS_PPA
-	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
-	default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
-	default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
-	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
-	default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
-	default 0x400000 if SYS_LS_PPA_FW_IN_MMC
-	default 0x400000 if SYS_LS_PPA_FW_IN_NAND
-
-	help
-	  If the PPA firmware locate at XIP flash, such as NOR or
-	  QSPI flash, this address is a directly memory-mapped.
-	  If it is in a serial accessed flash, such as NAND and SD
-	  card, it is a byte offset.
-
-config SYS_LS_PPA_ESBC_ADDR
-	hex "hdr address of PPA firmware loading from"
-	depends on FSL_LS_PPA && CHAIN_OF_TRUST
-	default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
-	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
-	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
-	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
-	default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
-	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
-	default 0x680000 if SYS_LS_PPA_FW_IN_MMC
-	default 0x680000 if SYS_LS_PPA_FW_IN_NAND
-	help
-	  If the PPA header firmware locate at XIP flash, such as NOR or
-	  QSPI flash, this address is a directly memory-mapped.
-	  If it is in a serial accessed flash, such as NAND and SD
-	  card, it is a byte offset.
-
 config LS_PPA_ESBC_HDR_SIZE
 	hex "Length of PPA ESBC header"
 	depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 3dcd6dd..078c21b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -229,7 +229,8 @@ dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
 	fsl-ls1012a-qds.dtb \
 	fsl-ls1012a-rdb.dtb \
 	fsl-ls1012a-2g5rdb.dtb \
-	fsl-ls1012a-frdm.dtb
+	fsl-ls1012a-frdm.dtb \
+	fsl-ls1012a-frwy.dtb
 
 dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb
 dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb
diff --git a/arch/arm/dts/fsl-ls1012a-frwy.dts b/arch/arm/dts/fsl-ls1012a-frwy.dts
new file mode 100644
index 0000000..a56909a
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1012a-frwy.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls1012a FRWY board device tree source
+ *
+ * Copyright 2018 NXP
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "FRWY-LS1012A Board";
+
+	aliases {
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = &duart0;
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: w25q16dw@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&duart0 {
+	status = "okay";
+};
diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index 0476f24..eb5cf88 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -428,7 +428,7 @@ int adjust_vdd(ulong vdd_override)
 		0,      /* reserved */
 		0,      /* reserved */
 		0,      /* reserved */
-		0,      /* reserved */
+		9000,      /* reserved */
 		0,      /* reserved */
 		0,      /* reserved */
 		0,      /* reserved */
diff --git a/board/freescale/ls1012afrdm/Kconfig b/board/freescale/ls1012afrdm/Kconfig
index 22d521b..55b414e 100644
--- a/board/freescale/ls1012afrdm/Kconfig
+++ b/board/freescale/ls1012afrdm/Kconfig
@@ -12,16 +12,22 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1012afrdm"
 
+config SYS_LS_PFE_FW_ADDR
+	hex "Flash address of PFE firmware"
+	default 0x40a00000
+
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x40400000
+endif
+
 if FSL_PFE
 
 config BOARD_SPECIFIC_OPTIONS # dummy
 	def_bool y
 	select PHYLIB
 	imply PHY_REALTEK
-
-config SYS_LS_PFE_FW_ADDR
-	hex "Flash address of PFE firmware"
-	default 0x40a00000
+	imply PHY_ATHEROS
 
 config DDR_PFE_PHYS_BASEADDR
 	hex "PFE DDR physical base address"
@@ -41,6 +47,38 @@ config PFE_EMAC2_PHY_ADDR
 
 endif
 
-source "board/freescale/common/Kconfig"
+if TARGET_LS1012AFRWY
+
+config SYS_BOARD
+	default "ls1012afrdm"
 
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls1012afrwy"
+
+config SYS_LS_PFE_FW_ADDR
+	hex "Flash address of PFE firmware"
+	default 0x40020000
+
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x40060000
+
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x401f4000
+
+config SYS_LS_PFE_ESBC_ADDR
+	hex "PFE Firmware HDR Addr"
+	default 0x401f8000
+
+endif
+
+if TARGET_LS1012AFRDM || TARGET_LS1012AFRWY
+source "board/freescale/common/Kconfig"
 endif
diff --git a/board/freescale/ls1012afrdm/MAINTAINERS b/board/freescale/ls1012afrdm/MAINTAINERS
index 842f86f..f3fcdb8 100644
--- a/board/freescale/ls1012afrdm/MAINTAINERS
+++ b/board/freescale/ls1012afrdm/MAINTAINERS
@@ -4,3 +4,14 @@ S:	Maintained
 F:	board/freescale/ls1012afrdm/
 F:	include/configs/ls1012afrdm.h
 F:	configs/ls1012afrdm_qspi_defconfig
+
+LS1012AFRWY BOARD
+M:      Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
+S:      Maintained
+F:      board/freescale/ls1012afrwy/
+F:      include/configs/ls1012afrwy.h
+F:      configs/ls1012afrwy_qspi_defconfig
+
+M:	Vinitha V Pillai <vinitha.pillai@nxp.com>
+S:	Maintained
+F:	configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c
index f8908e0..315da8b 100644
--- a/board/freescale/ls1012afrdm/ls1012afrdm.c
+++ b/board/freescale/ls1012afrdm/ls1012afrdm.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
  */
 
 #include <common.h>
@@ -13,23 +13,75 @@
 #endif
 #include <asm/arch/mmu.h>
 #include <asm/arch/soc.h>
+#include <fsl_esdhc.h>
 #include <hwconfig.h>
 #include <environment.h>
 #include <fsl_mmdc.h>
 #include <netdev.h>
+#include <fsl_sec.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static inline int get_board_version(void)
+{
+	struct ccsr_gpio *pgpio = (void *)(GPIO1_BASE_ADDR);
+	int val;
+
+	val = in_be32(&pgpio->gpdat);
+
+	return val;
+}
+
 int checkboard(void)
 {
+#ifdef CONFIG_TARGET_LS1012AFRDM
 	puts("Board: LS1012AFRDM ");
+#else
+	int rev;
+
+	rev = get_board_version();
+
+	puts("Board: FRWY-LS1012A ");
+
+	puts("Version");
+
+	switch (rev) {
+	case BOARD_REV_A:
+		puts(": RevA ");
+		break;
+	case BOARD_REV_B:
+		puts(": RevB ");
+		break;
+	default:
+		puts(": unknown");
+		break;
+	}
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_TARGET_LS1012AFRWY
+int esdhc_status_fixup(void *blob, const char *compat)
+{
+	char esdhc0_path[] = "/soc/esdhc@1560000";
+	char esdhc1_path[] = "/soc/esdhc@1580000";
+
+	do_fixup_by_path(blob, esdhc0_path, "status", "okay",
+			 sizeof("okay"), 1);
 
+	do_fixup_by_path(blob, esdhc1_path, "status", "disabled",
+			 sizeof("disabled"), 1);
 	return 0;
 }
+#endif
 
 int dram_init(void)
 {
-	static const struct fsl_mmdc_info mparam = {
+#ifdef CONFIG_TARGET_LS1012AFRWY
+	int board_rev;
+#endif
+	struct fsl_mmdc_info mparam = {
 		0x04180000,	/* mdctl */
 		0x00030035,	/* mdpdc */
 		0x12554000,	/* mdotc */
@@ -45,9 +97,20 @@ int dram_init(void)
 		0xa1390003,	/* mpzqhwctrl */
 	};
 
-	mmdc_init(&mparam);
+#ifdef CONFIG_TARGET_LS1012AFRWY
+	board_rev = get_board_version();
 
+	if (board_rev & BOARD_REV_B) {
+		mparam.mdctl = 0x05180000;
+		gd->ram_size = SYS_SDRAM_SIZE_1024;
+	} else {
+		gd->ram_size = SYS_SDRAM_SIZE_512;
+	}
+#else
 	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+#endif
+	mmdc_init(&mparam);
+
 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
 	/* This will break-before-make MMU for DDR */
 	update_early_mmu_table();
@@ -78,6 +141,10 @@ int board_init(void)
 	gd->env_addr = (ulong)&default_environment[0];
 #endif
 
+#ifdef CONFIG_FSL_CAAM
+	sec_init();
+#endif
+
 #ifdef CONFIG_FSL_LS_PPA
 	ppa_init();
 #endif
diff --git a/board/freescale/ls1012aqds/Kconfig b/board/freescale/ls1012aqds/Kconfig
index c0b12ed..b702fb2 100644
--- a/board/freescale/ls1012aqds/Kconfig
+++ b/board/freescale/ls1012aqds/Kconfig
@@ -12,6 +12,9 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1012aqds"
 
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+        default 0x40400000
 
 if FSL_PFE
 
diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig
index 493d477..4cd66bd 100644
--- a/board/freescale/ls1012ardb/Kconfig
+++ b/board/freescale/ls1012ardb/Kconfig
@@ -12,6 +12,16 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1012ardb"
 
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+        default 0x40400000
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x40680000
+endif
+
 if FSL_PFE
 
 config BOARD_SPECIFIC_OPTIONS # dummy
@@ -59,6 +69,10 @@ config SYS_SOC
 config SYS_CONFIG_NAME
         default "ls1012a2g5rdb"
 
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+        default 0x40400000
+
 if FSL_PFE
 
 config BOARD_SPECIFIC_OPTIONS # dummy
diff --git a/board/freescale/ls1043aqds/Kconfig b/board/freescale/ls1043aqds/Kconfig
index 95d2888..182900e 100644
--- a/board/freescale/ls1043aqds/Kconfig
+++ b/board/freescale/ls1043aqds/Kconfig
@@ -12,6 +12,22 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1043aqds"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x60680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 
 endif
diff --git a/board/freescale/ls1043ardb/Kconfig b/board/freescale/ls1043ardb/Kconfig
index 1bab7ca..3d9e295 100644
--- a/board/freescale/ls1043ardb/Kconfig
+++ b/board/freescale/ls1043ardb/Kconfig
@@ -22,6 +22,20 @@ config SYS_HAS_ARMV8_SECURE_BASE
 	  If enabled, please also define the value for ARMV8_SECURE_BASE,
 	  for LS1043ARDB, it could be some address in OCRAM.
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x60680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 
 endif
diff --git a/board/freescale/ls1046aqds/Kconfig b/board/freescale/ls1046aqds/Kconfig
index 070827d..1616dcc 100644
--- a/board/freescale/ls1046aqds/Kconfig
+++ b/board/freescale/ls1046aqds/Kconfig
@@ -12,6 +12,22 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1046aqds"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x60680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 
 endif
diff --git a/board/freescale/ls1046ardb/Kconfig b/board/freescale/ls1046ardb/Kconfig
index b9f2ed7..4c31e0e 100644
--- a/board/freescale/ls1046ardb/Kconfig
+++ b/board/freescale/ls1046ardb/Kconfig
@@ -12,5 +12,20 @@ config SYS_SOC
 
 config SYS_CONFIG_NAME
 	default "ls1046ardb"
+
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 endif
diff --git a/board/freescale/ls1088a/Kconfig b/board/freescale/ls1088a/Kconfig
index 4479dd0..8bb828e 100644
--- a/board/freescale/ls1088a/Kconfig
+++ b/board/freescale/ls1088a/Kconfig
@@ -12,6 +12,20 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1088aqds"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 endif
 
@@ -29,5 +43,19 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1088ardb"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 endif
diff --git a/board/freescale/ls2080aqds/Kconfig b/board/freescale/ls2080aqds/Kconfig
index e2b2c8d..6b2b645 100644
--- a/board/freescale/ls2080aqds/Kconfig
+++ b/board/freescale/ls2080aqds/Kconfig
@@ -13,6 +13,22 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls2080aqds"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x580400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x580680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 
 endif
diff --git a/board/freescale/ls2080ardb/Kconfig b/board/freescale/ls2080ardb/Kconfig
index 8f64642..678d582 100644
--- a/board/freescale/ls2080ardb/Kconfig
+++ b/board/freescale/ls2080ardb/Kconfig
@@ -1,5 +1,4 @@
-
-if TARGET_LS2080ARDB
+if TARGET_LS2080ARDB || TARGET_LS2081ARDB
 
 config SYS_BOARD
 	default "ls2080ardb"
@@ -15,21 +14,21 @@ config SYS_CONFIG_NAME
 
 source "board/freescale/common/Kconfig"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x580400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x580680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
 endif
-
-if TARGET_LS2081ARDB
-
-config SYS_BOARD
-	default "ls2080ardb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_SOC
-	default "fsl-layerscape"
-
-config SYS_CONFIG_NAME
-	default "ls2080ardb"
 
 source "board/freescale/common/Kconfig"
 
diff --git a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..bfc120a
--- /dev/null
+++ b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
@@ -0,0 +1,54 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1012AFRWY=y
+CONFIG_SECURE_BOOT=y
+CONFIG_SYS_TEXT_BASE=0x40100000
+CONFIG_FSL_LS_PPA=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frwy"
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+# CONFIG_BLK is not set
+CONFIG_DM_MMC=y
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM_ETH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_FSL_PFE=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_RSA=y
+CONFIG_RSA_SOFTWARE_EXP=y
diff --git a/configs/ls1012afrwy_qspi_defconfig b/configs/ls1012afrwy_qspi_defconfig
new file mode 100644
index 0000000..03ff477
--- /dev/null
+++ b/configs/ls1012afrwy_qspi_defconfig
@@ -0,0 +1,50 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1012AFRWY=y
+CONFIG_SYS_TEXT_BASE=0x40100000
+CONFIG_FSL_LS_PPA=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frwy"
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+# CONFIG_BLK is not set
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_FSL_PFE=y
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
index 17791b0..e4f0068 100644
--- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
@@ -33,6 +33,7 @@ CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_OF_CONTROL=y
 CONFIG_NET_RANDOM_ETHADDR=y
@@ -49,5 +50,11 @@ CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
diff --git a/drivers/net/pfe_eth/pfe_firmware.c b/drivers/net/pfe_eth/pfe_firmware.c
index f06ed37..adb2d06 100644
--- a/drivers/net/pfe_eth/pfe_firmware.c
+++ b/drivers/net/pfe_eth/pfe_firmware.c
@@ -12,6 +12,9 @@
 
 #include <net/pfe_eth/pfe_eth.h>
 #include <net/pfe_eth/pfe_firmware.h>
+#ifdef CONFIG_CHAIN_OF_TRUST
+#include <fsl_validate.h>
+#endif
 
 #define PFE_FIRMEWARE_FIT_CNF_NAME	"config@1"
 
@@ -168,10 +171,15 @@ static int pfe_fit_check(void)
  */
 int pfe_firmware_init(void)
 {
+#define PFE_KEY_HASH	NULL
 	char *pfe_firmware_name;
 	const void *raw_image_addr;
 	size_t raw_image_size = 0;
 	u8 *pfe_firmware;
+#ifdef CONFIG_CHAIN_OF_TRUST
+	uintptr_t pfe_esbc_hdr = 0;
+	uintptr_t pfe_img_addr = 0;
+#endif
 	int ret = 0;
 	int fw_count;
 
@@ -179,6 +187,27 @@ int pfe_firmware_init(void)
 	if (ret)
 		goto err;
 
+#ifdef CONFIG_CHAIN_OF_TRUST
+	pfe_esbc_hdr = CONFIG_SYS_LS_PFE_ESBC_ADDR;
+	pfe_img_addr = (uintptr_t)pfe_fit_addr;
+	if (fsl_check_boot_mode_secure() != 0) {
+		/*
+		 * In case of failure in validation, fsl_secboot_validate
+		 * would not return back in case of Production environment
+		 * with ITS=1. In Development environment (ITS=0 and
+		 * SB_EN=1), the function may return back in case of
+		 * non-fatal failures.
+		 */
+		ret = fsl_secboot_validate(pfe_esbc_hdr,
+					   PFE_KEY_HASH,
+					   &pfe_img_addr);
+		if (ret != 0)
+			printf("PFE firmware(s) validation failed\n");
+		else
+			printf("PFE firmware(s) validation Successful\n");
+	}
+#endif
+
 	for (fw_count = 0; fw_count < 2; fw_count++) {
 		if (fw_count == 0)
 			pfe_firmware_name = "class";
diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
new file mode 100644
index 0000000..35578c3
--- /dev/null
+++ b/include/configs/ls1012afrwy.h
@@ -0,0 +1,133 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __LS1012AFRWY_H__
+#define __LS1012AFRWY_H__
+
+#include "ls1012a_common.h"
+
+/* Board Rev*/
+#define BOARD_REV_A			0x0
+#define BOARD_REV_B			0x200
+
+/* DDR */
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+#define CONFIG_CHIP_SELECTS_PER_CTRL	1
+#define CONFIG_NR_DRAM_BANKS		2
+#define SYS_SDRAM_SIZE_512		0x20000000
+#define SYS_SDRAM_SIZE_1024		0x40000000
+#define CONFIG_CHIP_SELECTS_PER_CTRL	1
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
+
+#ifndef CONFIG_SPL_BUILD
+#undef BOOT_TARGET_DEVICES
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0)
+#endif
+
+#undef CONFIG_ENV_OFFSET
+#define CONFIG_ENV_OFFSET              0x1D0000
+#undef FSL_QSPI_FLASH_SIZE
+#define FSL_QSPI_FLASH_SIZE            SZ_16M
+#undef CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_SECT_SIZE		0x10000 /*64 KB*/
+#undef CONFIG_ENV_SIZE
+#define CONFIG_ENV_SIZE			0x10000 /*64 KB*/
+
+/*  MMC  */
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#endif
+
+#define CONFIG_PCIE1		/* PCIE controller 1 */
+
+#define CONFIG_PCI_SCAN_SHOW
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"verify=no\0"				\
+	"fdt_high=0xffffffffffffffff\0"		\
+	"initrd_high=0xffffffffffffffff\0"	\
+	"fdt_addr=0x00f00000\0"			\
+	"kernel_addr=0x01000000\0"		\
+	"kernel_size_sd=0x16000\0"		\
+	"kernelhdr_size_sd=0x10\0"		\
+	"kernel_addr_sd=0x8000\0"		\
+	"kernelhdr_addr_sd=0x4000\0"		\
+	"kernelheader_addr=0x1fc000\0"		\
+	"kernelheader_addr=0x1fc000\0"		\
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"		\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernelheader_size=0x40000\0"		\
+	"kernel_addr_r=0x81000000\0"		\
+	"fdt_addr_r=0x90000000\0"		\
+	"load_addr=0x96000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"console=ttyS0,115200\0"		\
+	BOOTENV					\
+	"boot_scripts=ls1012afrwy_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1012afrwy_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+	     "part list ${devtype} ${devnum} devplist; "	\
+	     "env exists devplist || setenv devplist 1; "	\
+	     "for distro_bootpart in ${devplist}; do "		\
+		  "if fstype ${devtype} "			\
+		      "${devnum}:${distro_bootpart} "		\
+		      "bootfstype; then "			\
+		      "run scan_dev_for_boot; "	\
+		  "fi; "			\
+	      "done\0"				\
+	"scan_dev_for_boot="				  \
+		"echo Scanning ${devtype} "		  \
+				"${devnum}:${distro_bootpart}...; "  \
+		"for prefix in ${boot_prefixes}; do "	  \
+			"run scan_dev_for_scripts; "	  \
+		"done;"					  \
+		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
+	"installer=load mmc 0:2 $load_addr "	\
+		   "/flex_installer_arm64.itb; "	\
+		   "bootm $load_addr#$board\0"	\
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
+		"sf probe && sf read $load_addr "	\
+		"$kernel_addr $kernel_size; env exists secureboot "	\
+		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+		"bootm $load_addr#$board\0"	\
+	"sd_bootcmd=echo Trying load from sd card..;"		\
+		"mmcinfo; mmc read $load_addr "			\
+		"$kernel_addr_sd $kernel_size_sd ;"		\
+		"env exists secureboot && mmc read $kernelheader_addr_r "\
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
+			   "env exists secureboot && esbc_halt;"
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
+
+#include <asm/fsl_secure_boot.h>
+
+#include <asm/fsl_secure_boot.h>
+#endif /* __LS1012AFRWY_H__ */
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 0b4a6a4..79a84c4 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -351,6 +351,15 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM		0
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+
 /*
  * I2C bus multiplexer
  */