arm: at91: mpddr: allow multiple DDR controllers

The mpddr.c depends on ATMEL_BASE_MPDDRC for the base address to configure the controller.
This cannot be used when there is more than one controller (i.e. AT91SAM9G45, AT91SAM9M10).

Signed-off-by: Erik van Luijk <evanluijk@interact.nl>
[remove 'new blank line at EOF']
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

14 files changed, 34 insertions, 36 deletions

diff --git a/arch/arm/mach-at91/include/mach/atmel_mpddrc.h b/arch/arm/mach-at91/include/mach/atmel_mpddrc.h
index 130a85a..c6c8dda 100644
--- a/arch/arm/mach-at91/include/mach/atmel_mpddrc.h
+++ b/arch/arm/mach-at91/include/mach/atmel_mpddrc.h
@@ -23,8 +23,10 @@ struct atmel_mpddr {
 	u32 md;
 };
 
-int ddr2_init(const unsigned int ram_address,
-	       const struct atmel_mpddr *mpddr);
+
+int ddr2_init(const unsigned int base,
+	      const unsigned int ram_address,
+	      const struct atmel_mpddr *mpddr);
 
 /* Bit field in mode register */
 #define ATMEL_MPDDRC_MR_MODE_NORMAL_CMD		0x0
diff --git a/arch/arm/mach-at91/mpddrc.c b/arch/arm/mach-at91/mpddrc.c
index e2b6a49..47e6e5a 100644
--- a/arch/arm/mach-at91/mpddrc.c
+++ b/arch/arm/mach-at91/mpddrc.c
@@ -9,10 +9,10 @@
 #include <asm/io.h>
 #include <asm/arch/atmel_mpddrc.h>
 
-static inline void atmel_mpddr_op(int mode, u32 ram_address)
+static inline void atmel_mpddr_op(const struct atmel_mpddr *mpddr,
+	      int mode,
+	      u32 ram_address)
 {
-	struct atmel_mpddr *mpddr = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
-
 	writel(mode, &mpddr->mr);
 	writel(0, ram_address);
 }
@@ -27,10 +27,13 @@ static int ddr2_decodtype_is_seq(u32 cr)
 	return 1;
 }
 
-int ddr2_init(const unsigned int ram_address,
+
+int ddr2_init(const unsigned int base,
+	      const unsigned int ram_address,
 	      const struct atmel_mpddr *mpddr_value)
 {
-	struct atmel_mpddr *mpddr = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
+	const struct atmel_mpddr *mpddr = (struct atmel_mpddr *)base;
+
 	u32 ba_off, cr;
 
 	/* Compute bank offset according to NC in configuration register */
@@ -52,30 +55,30 @@ int ddr2_init(const unsigned int ram_address,
 	writel(mpddr_value->tpr2, &mpddr->tpr2);
 
 	/* Issue a NOP command */
-	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
 
 	/* A 200 us is provided to precede any signal toggle */
 	udelay(200);
 
 	/* Issue a NOP command */
-	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
 
 	/* Issue an all banks precharge command */
-	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);
 
 	/* Issue an extended mode register set(EMRS2) to choose operation */
-	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
 		       ram_address + (0x2 << ba_off));
 
 	/* Issue an extended mode register set(EMRS3) to set EMSR to 0 */
-	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
 		       ram_address + (0x3 << ba_off));
 
 	/*
 	 * Issue an extended mode register set(EMRS1) to enable DLL and
 	 * program D.I.C (output driver impedance control)
 	 */
-	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
 		       ram_address + (0x1 << ba_off));
 
 	/* Enable DLL reset */
@@ -83,21 +86,21 @@ int ddr2_init(const unsigned int ram_address,
 	writel(cr | ATMEL_MPDDRC_CR_DLL_RESET_ENABLED, &mpddr->cr);
 
 	/* A mode register set(MRS) cycle is issued to reset DLL */
-	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
 
 	/* Issue an all banks precharge command */
-	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address);
 
 	/* Two auto-refresh (CBR) cycles are provided */
-	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
-	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address);
 
 	/* Disable DLL reset */
 	cr = readl(&mpddr->cr);
 	writel(cr & (~ATMEL_MPDDRC_CR_DLL_RESET_ENABLED), &mpddr->cr);
 
 	/* A mode register set (MRS) cycle is issued to disable DLL reset */
-	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
 
 	/* Set OCD calibration in default state */
 	cr = readl(&mpddr->cr);
@@ -107,7 +110,7 @@ int ddr2_init(const unsigned int ram_address,
 	 * An extended mode register set (EMRS1) cycle is issued
 	 * to OCD default value
 	 */
-	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
 		       ram_address + (0x1 << ba_off));
 
 	 /* OCD calibration mode exit */
@@ -118,11 +121,11 @@ int ddr2_init(const unsigned int ram_address,
 	 * An extended mode register set (EMRS1) cycle is issued
 	 * to enable OCD exit
 	 */
-	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
 		       ram_address + (0x1 << ba_off));
 
 	/* A nornal mode command is provided */
-	atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address);
+	atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address);
 
 	/* Perform a write access to any DDR2-SDRAM address */
 	writel(0, ram_address);
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
index 4289179..3e65d71 100644
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -147,7 +147,7 @@ void mem_init(void)
 	writel(csa, &mat->ebicsa);
 
 	/* DDRAM2 Controller initialize */
-	ddr2_init(ATMEL_BASE_CS6, &ddr2);
+	ddr2_init(ATMEL_BASE_DDRSDRC0, ATMEL_BASE_CS6, &ddr2);
 }
 #endif
 
diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
index 4f46a03..8437f37 100644
--- a/board/atmel/at91sam9n12ek/at91sam9n12ek.c
+++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
@@ -327,6 +327,6 @@ void mem_init(void)
 	writel(csa, &matrix->ebicsa);
 
 	/* DDRAM2 Controller initialize */
-	ddr2_init(ATMEL_BASE_CS1, &ddr2);
+	ddr2_init(ATMEL_BASE_DDRSDRC, ATMEL_BASE_CS1, &ddr2);
 }
 #endif
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index 114ac5c..0455e2c 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -364,6 +364,6 @@ void mem_init(void)
 	writel(csa, &matrix->ebicsa);
 
 	/* DDRAM2 Controller initialize */
-	ddr2_init(ATMEL_BASE_CS1, &ddr2);
+	ddr2_init(ATMEL_BASE_DDRSDRC, ATMEL_BASE_CS1, &ddr2);
 }
 #endif
diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c
index 92ed4e8..0793e4a 100644
--- a/board/atmel/sama5d3_xplained/sama5d3_xplained.c
+++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c
@@ -194,7 +194,7 @@ void mem_init(void)
 	writel(0x4, &pmc->scer);
 
 	/* DDRAM2 Controller initialize */
-	ddr2_init(ATMEL_BASE_DDRCS, &ddr2);
+	ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
 }
 
 void at91_pmc_init(void)
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
index cf6ed8b..d6e7e16 100644
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -433,7 +433,7 @@ void mem_init(void)
 	writel(0x4, &pmc->scer);
 
 	/* DDRAM2 Controller initialize */
-	ddr2_init(ATMEL_BASE_DDRCS, &ddr2);
+	ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
 }
 
 void at91_pmc_init(void)
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
index 7d447fe..71ec4b7 100644
--- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c
+++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
@@ -393,7 +393,7 @@ void mem_init(void)
 	writel(0x4, &pmc->scer);
 
 	/* DDRAM2 Controller initialize */
-	ddr2_init(ATMEL_BASE_DDRCS, &ddr2);
+	ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
 }
 
 void at91_pmc_init(void)
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c
index e9bbb4b..de4291f 100644
--- a/board/atmel/sama5d4ek/sama5d4ek.c
+++ b/board/atmel/sama5d4ek/sama5d4ek.c
@@ -389,7 +389,7 @@ void mem_init(void)
 	writel(0x4, &pmc->scer);
 
 	/* DDRAM2 Controller initialize */
-	ddr2_init(ATMEL_BASE_DDRCS, &ddr2);
+	ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
 }
 
 void at91_pmc_init(void)
diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c
index f3f6dae..9001fcbcf 100644
--- a/board/siemens/corvus/board.c
+++ b/board/siemens/corvus/board.c
@@ -160,7 +160,7 @@ void mem_init(void)
 	writel(csa, &mat->ebicsa);
 
 	/* DDRAM2 Controller initialize */
-	ddr2_init(ATMEL_BASE_CS6, &ddr2);
+	ddr2_init(ATMEL_BASE_DDRSDRC0, ATMEL_BASE_CS6, &ddr2);
 }
 #endif
 
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 4d90209..2f6a3a5 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -251,5 +251,4 @@
 #define CONFIG_SYS_MCKR			0x1301
 #define CONFIG_SYS_MCKR_CSS		0x1302
 
-#define ATMEL_BASE_MPDDRC		ATMEL_BASE_DDRSDRC0
 #endif
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index ea0a94b..acdd63e 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -259,8 +259,6 @@
 #define CONFIG_SYS_MCKR			0x1301
 #define CONFIG_SYS_MCKR_CSS		0x1302
 
-#define ATMEL_BASE_MPDDRC		ATMEL_BASE_DDRSDRC
-
 #ifdef CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
 #define CONFIG_SPL_MMC_SUPPORT
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 9f76786..fbb584d 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -261,8 +261,6 @@
 #define CONFIG_SYS_MCKR			0x1301
 #define CONFIG_SYS_MCKR_CSS		0x1302
 
-#define ATMEL_BASE_MPDDRC		ATMEL_BASE_DDRSDRC
-
 #ifdef CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
 #define CONFIG_SPL_MMC_SUPPORT
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 2d2f3c1..c91e289 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -193,6 +193,4 @@
 #define CONFIG_SYS_MCKR			0x1301
 #define CONFIG_SYS_MCKR_CSS		0x1302
 
-#define ATMEL_BASE_MPDDRC		ATMEL_BASE_DDRSDRC0
-
 #endif