diff options
author | Graeme Russ <graeme.russ@gmail.com> | 2009-08-23 12:59:56 +1000 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2009-09-04 21:56:45 +0200 |
commit | ed7a1b681de1e31d18d5b92e2767ae8df3241687 (patch) | |
tree | 9ff41a5e184dd262ff56c52a5274f513a380e8e2 | |
parent | 9b32f96b5b92ba13fdb4b5eb637734752235f260 (diff) | |
download | u-boot-ed7a1b681de1e31d18d5b92e2767ae8df3241687.zip u-boot-ed7a1b681de1e31d18d5b92e2767ae8df3241687.tar.gz u-boot-ed7a1b681de1e31d18d5b92e2767ae8df3241687.tar.bz2 |
i386: Replace [read, write]_mmcr_[byte, word, long] with memory mapped structure
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
-rw-r--r-- | board/eNET/eNET.c | 86 | ||||
-rw-r--r-- | board/sc520_cdp/flash.c | 14 | ||||
-rw-r--r-- | board/sc520_cdp/sc520_cdp.c | 171 | ||||
-rw-r--r-- | board/sc520_spunk/sc520_spunk.c | 211 | ||||
-rw-r--r-- | cpu/i386/sc520/sc520.c | 71 | ||||
-rw-r--r-- | cpu/i386/sc520/sc520_pci.c | 66 | ||||
-rw-r--r-- | cpu/i386/sc520/sc520_ssi.c | 28 | ||||
-rw-r--r-- | cpu/i386/sc520/sc520_timer.c | 31 | ||||
-rw-r--r-- | include/asm-i386/ic/sc520.h | 417 |
9 files changed, 550 insertions, 545 deletions
diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c index 27dabaa..29cf295 100644 --- a/board/eNET/eNET.c +++ b/board/eNET/eNET.c @@ -46,7 +46,7 @@ unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN; void init_sc520_enet (void) { /* Set CPU Speed to 100MHz */ - write_mmcr_byte(SC520_CPUCTL, 1); + sc520_mmcr->cpuctl = 0x01; gd->cpu_clk = 100000000; /* wait at least one millisecond */ @@ -56,7 +56,7 @@ void init_sc520_enet (void) "loop 0b\n": : : "ecx"); /* turn on the SDRAM write buffer */ - write_mmcr_byte(SC520_DBCTL, 0x11); + sc520_mmcr->dbctl = 0x11; /* turn on the cache and disable write through */ asm("movl %%cr0, %%eax\n" @@ -71,51 +71,51 @@ int board_init(void) { init_sc520_enet(); - write_mmcr_byte(SC520_GPCSRT, 0x01); /* GP Chip Select Recovery Time */ - write_mmcr_byte(SC520_GPCSPW, 0x07); /* GP Chip Select Pulse Width */ - write_mmcr_byte(SC520_GPCSOFF, 0x00); /* GP Chip Select Offset */ - write_mmcr_byte(SC520_GPRDW, 0x05); /* GP Read pulse width */ - write_mmcr_byte(SC520_GPRDOFF, 0x01); /* GP Read offset */ - write_mmcr_byte(SC520_GPWRW, 0x05); /* GP Write pulse width */ - write_mmcr_byte(SC520_GPWROFF, 0x01); /* GP Write offset */ - - write_mmcr_word(SC520_PIODATA15_0, 0x0630); /* PIO15_PIO0 Data */ - write_mmcr_word(SC520_PIODATA31_16, 0x2000); /* PIO31_PIO16 Data */ - write_mmcr_word(SC520_PIODIR31_16, 0x2000); /* GPIO Direction */ - write_mmcr_word(SC520_PIODIR15_0, 0x87b5); /* GPIO Direction */ - write_mmcr_word(SC520_PIOPFS31_16, 0x0dfe); /* GPIO pin function 31-16 reg */ - write_mmcr_word(SC520_PIOPFS15_0, 0x200a); /* GPIO pin function 15-0 reg */ - write_mmcr_byte(SC520_CSPFS, 0x00f8); /* Chip Select Pin Function Select */ - - write_mmcr_long(SC520_PAR2, 0x200713f8); /* Uart A (GPCS0, 0x013f8, 8 Bytes) */ - write_mmcr_long(SC520_PAR3, 0x2c0712f8); /* Uart B (GPCS3, 0x012f8, 8 Bytes) */ - write_mmcr_long(SC520_PAR4, 0x300711f8); /* Uart C (GPCS4, 0x011f8, 8 Bytes) */ - write_mmcr_long(SC520_PAR5, 0x340710f8); /* Uart D (GPCS5, 0x010f8, 8 Bytes) */ - write_mmcr_long(SC520_PAR6, 0xe3ffc000); /* SDRAM (0x00000000, 128MB) */ - write_mmcr_long(SC520_PAR7, 0xaa3fd000); /* StrataFlash (ROMCS1, 0x10000000, 16MB) */ - write_mmcr_long(SC520_PAR8, 0xca3fd100); /* StrataFlash (ROMCS2, 0x11000000, 16MB) */ - write_mmcr_long(SC520_PAR9, 0x4203d900); /* SRAM (GPCS0, 0x19000000, 1MB) */ - write_mmcr_long(SC520_PAR10, 0x4e03d910); /* SRAM (GPCS3, 0x19100000, 1MB) */ - write_mmcr_long(SC520_PAR11, 0x50018100); /* DP-RAM (GPCS4, 0x18100000, 4kB) */ - write_mmcr_long(SC520_PAR12, 0x54020000); /* CFLASH1 (0x200000000, 4kB) */ - write_mmcr_long(SC520_PAR13, 0x5c020001); /* CFLASH2 (0x200010000, 4kB) */ -/* write_mmcr_long(SC520_PAR14, 0x8bfff800); */ /* BOOTCS at 0x18000000 */ -/* write_mmcr_long(SC520_PAR15, 0x38201000); */ /* LEDs etc (GPCS6, 0x1000, 20 Bytes */ + sc520_mmcr->gpcsrt = 0x01; /* GP Chip Select Recovery Time */ + sc520_mmcr->gpcspw = 0x07; /* GP Chip Select Pulse Width */ + sc520_mmcr->gpcsoff = 0x00; /* GP Chip Select Offset */ + sc520_mmcr->gprdw = 0x05; /* GP Read pulse width */ + sc520_mmcr->gprdoff = 0x01; /* GP Read offset */ + sc520_mmcr->gpwrw = 0x05; /* GP Write pulse width */ + sc520_mmcr->gpwroff = 0x01; /* GP Write offset */ + + sc520_mmcr->piodata15_0 = 0x0630; /* PIO15_PIO0 Data */ + sc520_mmcr->piodata31_16 = 0x2000; /* PIO31_PIO16 Data */ + sc520_mmcr->piodir31_16 = 0x2000; /* GPIO Direction */ + sc520_mmcr->piodir15_0 = 0x87b5; /* GPIO Direction */ + sc520_mmcr->piopfs31_16 = 0x0dfe; /* GPIO pin function 31-16 reg */ + sc520_mmcr->piopfs15_0 = 0x200a; /* GPIO pin function 15-0 reg */ + sc520_mmcr->cspfs = 0x00f8; /* Chip Select Pin Function Select */ + + sc520_mmcr->par[2] = 0x200713f8; /* Uart A (GPCS0, 0x013f8, 8 Bytes) */ + sc520_mmcr->par[3] = 0x2c0712f8; /* Uart B (GPCS3, 0x012f8, 8 Bytes) */ + sc520_mmcr->par[4] = 0x300711f8; /* Uart C (GPCS4, 0x011f8, 8 Bytes) */ + sc520_mmcr->par[5] = 0x340710f8; /* Uart D (GPCS5, 0x010f8, 8 Bytes) */ + sc520_mmcr->par[6] = 0xe3ffc000; /* SDRAM (0x00000000, 128MB) */ + sc520_mmcr->par[7] = 0xaa3fd000; /* StrataFlash (ROMCS1, 0x10000000, 16MB) */ + sc520_mmcr->par[8] = 0xca3fd100; /* StrataFlash (ROMCS2, 0x11000000, 16MB) */ + sc520_mmcr->par[9] = 0x4203d900; /* SRAM (GPCS0, 0x19000000, 1MB) */ + sc520_mmcr->par[10] = 0x4e03d910; /* SRAM (GPCS3, 0x19100000, 1MB) */ + sc520_mmcr->par[11] = 0x50018100; /* DP-RAM (GPCS4, 0x18100000, 4kB) */ + sc520_mmcr->par[12] = 0x54020000; /* CFLASH1 (0x200000000, 4kB) */ + sc520_mmcr->par[13] = 0x5c020001; /* CFLASH2 (0x200010000, 4kB) */ +/* sc520_mmcr->par14 = 0x8bfff800; */ /* BOOTCS at 0x18000000 */ +/* sc520_mmcr->par15 = 0x38201000; */ /* LEDs etc (GPCS6, 0x1000, 20 Bytes */ /* Disable Watchdog */ - write_mmcr_word(0x0cb0, 0x3333); - write_mmcr_word(0x0cb0, 0xcccc); - write_mmcr_word(0x0cb0, 0x0000); + sc520_mmcr->wdtmrctl = 0x3333; + sc520_mmcr->wdtmrctl = 0xcccc; + sc520_mmcr->wdtmrctl = 0x0000; /* Chip Select Configuration */ - write_mmcr_word(SC520_BOOTCSCTL, 0x0033); - write_mmcr_word(SC520_ROMCS1CTL, 0x0615); - write_mmcr_word(SC520_ROMCS2CTL, 0x0615); - - write_mmcr_byte(SC520_ADDDECCTL, 0x02); - write_mmcr_byte(SC520_UART1CTL, 0x07); - write_mmcr_byte(SC520_SYSARBCTL,0x06); - write_mmcr_word(SC520_SYSARBMENB, 0x0003); + sc520_mmcr->bootcsctl = 0x0033; + sc520_mmcr->romcs1ctl = 0x0615; + sc520_mmcr->romcs2ctl = 0x0615; + + sc520_mmcr->adddecctl = 0x02; + sc520_mmcr->uart1ctl = 0x07; + sc520_mmcr->sysarbctl = 0x06; + sc520_mmcr->sysarbmenb = 0x0003; /* Crystal is 33.000MHz */ gd->bus_clk = 33000000; diff --git a/board/sc520_cdp/flash.c b/board/sc520_cdp/flash.c index dcb8c57..64831b7 100644 --- a/board/sc520_cdp/flash.c +++ b/board/sc520_cdp/flash.c @@ -337,12 +337,12 @@ done: ; unsigned micro; \ unsigned milli=0; \ \ - micro = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); \ + micro = sc520_mmcr->swtmrmilli; \ \ for (;;) { \ \ - milli += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); \ - micro = *(volatile u16*)(0xfffef000+SC520_SWTMRMICRO); \ + milli += sc520_mmcr->swtmrmilli; \ + micro = sc520_mmcr->swtmrmicro; \ \ if ((delay) <= (micro + (milli * 1000))) { \ break; \ @@ -364,12 +364,12 @@ static u32 _amd_erase_flash(u32 addr, u32 sector) /* Sector erase command comes last */ *(volatile u32*)(addr + sector) = 0x30303030; - elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */ + elapsed = sc520_mmcr->swtmrmilli; /* dummy read */ elapsed = 0; __udelay(50); while (((*(volatile u32*)(addr + sector)) & 0x80808080) != 0x80808080) { - elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); + elapsed += sc520_mmcr->swtmrmilli; if (elapsed > ((CONFIG_SYS_FLASH_ERASE_TOUT/CONFIG_SYS_HZ) * 1000)) { *(volatile u32*)(addr) = 0xf0f0f0f0; return 1; @@ -487,12 +487,12 @@ static int _amd_write_word(unsigned start, unsigned dest, unsigned data) dest2[0] = data; - elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */ + elapsed = sc520_mmcr->swtmrmilli; /* dummy read */ elapsed = 0; /* data polling for D7 */ while ((dest2[0] & 0x80808080) != (data2[0] & 0x80808080)) { - elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); + elapsed += sc520_mmcr->swtmrmilli; if (elapsed > ((CONFIG_SYS_FLASH_WRITE_TOUT/CONFIG_SYS_HZ) * 1000)) { addr2[0] = 0xf0f0f0f0; return 1; diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c index 9cbe63e..9312f4f 100644 --- a/board/sc520_cdp/sc520_cdp.c +++ b/board/sc520_cdp/sc520_cdp.c @@ -58,61 +58,60 @@ DECLARE_GLOBAL_DATA_PTR; static void irq_init(void) { /* disable global interrupt mode */ - write_mmcr_byte(SC520_PICICR, 0x40); + sc520_mmcr->picicr = 0x40; /* set all irqs to edge */ - write_mmcr_byte(SC520_MPICMODE, 0x00); - write_mmcr_byte(SC520_SL1PICMODE, 0x00); - write_mmcr_byte(SC520_SL2PICMODE, 0x00); + sc520_mmcr->pic_mode[0] = 0x00; + sc520_mmcr->pic_mode[1] = 0x00; + sc520_mmcr->pic_mode[2] = 0x00; /* active low polarity on PIC interrupt pins, * active high polarity on all other irq pins */ - write_mmcr_word(SC520_INTPINPOL, 0x0000); + sc520_mmcr->intpinpol = 0x0000; /* set irq number mapping */ - write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED); /* disable GP timer 0 INT */ - write_mmcr_byte(SC520_GPTMR1MAP, SC520_IRQ_DISABLED); /* disable GP timer 1 INT */ - write_mmcr_byte(SC520_GPTMR2MAP, SC520_IRQ_DISABLED); /* disable GP timer 2 INT */ - write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT timer 0 INT to IRQ0 */ - write_mmcr_byte(SC520_PIT1MAP, SC520_IRQ_DISABLED); /* disable PIT timer 1 INT */ - write_mmcr_byte(SC520_PIT2MAP, SC520_IRQ_DISABLED); /* disable PIT timer 2 INT */ - write_mmcr_byte(SC520_PCIINTAMAP, SC520_IRQ_DISABLED); /* disable PCI INT A */ - write_mmcr_byte(SC520_PCIINTBMAP, SC520_IRQ_DISABLED); /* disable PCI INT B */ - write_mmcr_byte(SC520_PCIINTCMAP, SC520_IRQ_DISABLED); /* disable PCI INT C */ - write_mmcr_byte(SC520_PCIINTDMAP, SC520_IRQ_DISABLED); /* disable PCI INT D */ - write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */ - write_mmcr_byte(SC520_SSIMAP, SC520_IRQ_DISABLED); /* disable Synchronius serial INT */ - write_mmcr_byte(SC520_WDTMAP, SC520_IRQ_DISABLED); /* disable Watchdog INT */ - write_mmcr_byte(SC520_RTCMAP, SC520_IRQ8); /* Set RTC int to 8 */ - write_mmcr_byte(SC520_WPVMAP, SC520_IRQ_DISABLED); /* disable write protect INT */ - write_mmcr_byte(SC520_ICEMAP, SC520_IRQ1); /* Set ICE Debug Serielport INT to IRQ1 */ - write_mmcr_byte(SC520_FERRMAP,SC520_IRQ13); /* Set FP error INT to IRQ13 */ + sc520_mmcr->gp_tmr_int_map[0] = SC520_IRQ_DISABLED; /* disable GP timer 0 INT */ + sc520_mmcr->gp_tmr_int_map[1] = SC520_IRQ_DISABLED; /* disable GP timer 1 INT */ + sc520_mmcr->gp_tmr_int_map[2] = SC520_IRQ_DISABLED; /* disable GP timer 2 INT */ + sc520_mmcr->pit_int_map[0] = SC520_IRQ0; /* Set PIT timer 0 INT to IRQ0 */ + sc520_mmcr->pit_int_map[1] = SC520_IRQ_DISABLED; /* disable PIT timer 1 INT */ + sc520_mmcr->pit_int_map[2] = SC520_IRQ_DISABLED; /* disable PIT timer 2 INT */ + sc520_mmcr->pci_int_map[0] = SC520_IRQ_DISABLED; /* disable PCI INT A */ + sc520_mmcr->pci_int_map[1] = SC520_IRQ_DISABLED; /* disable PCI INT B */ + sc520_mmcr->pci_int_map[2] = SC520_IRQ_DISABLED; /* disable PCI INT C */ + sc520_mmcr->pci_int_map[3] = SC520_IRQ_DISABLED; /* disable PCI INT D */ + sc520_mmcr->dmabcintmap = SC520_IRQ_DISABLED; /* disable DMA INT */ + sc520_mmcr->ssimap = SC520_IRQ_DISABLED; /* disable Synchronius serial INT */ + sc520_mmcr->wdtmap = SC520_IRQ_DISABLED; /* disable Watchdog INT */ + sc520_mmcr->rtcmap = SC520_IRQ8; /* Set RTC int to 8 */ + sc520_mmcr->wpvmap = SC520_IRQ_DISABLED; /* disable write protect INT */ + sc520_mmcr->icemap = SC520_IRQ1; /* Set ICE Debug Serielport INT to IRQ1 */ + sc520_mmcr->ferrmap = SC520_IRQ13; /* Set FP error INT to IRQ13 */ if (CONFIG_SYS_USE_SIO_UART) { - write_mmcr_byte(SC520_UART1MAP, SC520_IRQ_DISABLED); /* disable internal UART1 INT */ - write_mmcr_byte(SC520_UART2MAP, SC520_IRQ_DISABLED); /* disable internal UART2 INT */ - write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ3); /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */ - write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ4); /* Set GPIRQ4 (ISA IRQ4) to IRQ4 */ + sc520_mmcr->uart_int_map[0] = SC520_IRQ_DISABLED; /* disable internal UART1 INT */ + sc520_mmcr->uart_int_map[1] = SC520_IRQ_DISABLED; /* disable internal UART2 INT */ + sc520_mmcr->gp_int_map[3] = SC520_IRQ3; /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */ + sc520_mmcr->gp_int_map[4] = SC520_IRQ4; /* Set GPIRQ4 (ISA IRQ4) to IRQ4 */ } else { - write_mmcr_byte(SC520_UART1MAP, SC520_IRQ4); /* Set internal UART2 INT to IRQ4 */ - write_mmcr_byte(SC520_UART2MAP, SC520_IRQ3); /* Set internal UART2 INT to IRQ3 */ - write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ3 (ISA IRQ3) */ - write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ4 (ISA IRQ4) */ + sc520_mmcr->uart_int_map[0] = SC520_IRQ4; /* Set internal UART2 INT to IRQ4 */ + sc520_mmcr->uart_int_map[1] = SC520_IRQ3; /* Set internal UART2 INT to IRQ3 */ + sc520_mmcr->gp_int_map[3] = SC520_IRQ_DISABLED; /* disable GPIRQ3 (ISA IRQ3) */ + sc520_mmcr->gp_int_map[4] = SC520_IRQ_DISABLED; /* disable GPIRQ4 (ISA IRQ4) */ } - write_mmcr_byte(SC520_GP1IMAP, SC520_IRQ1); /* Set GPIRQ1 (SIO IRQ1) to IRQ1 */ - write_mmcr_byte(SC520_GP5IMAP, SC520_IRQ5); /* Set GPIRQ5 (ISA IRQ5) to IRQ5 */ - write_mmcr_byte(SC520_GP6IMAP, SC520_IRQ6); /* Set GPIRQ6 (ISA IRQ6) to IRQ6 */ - write_mmcr_byte(SC520_GP7IMAP, SC520_IRQ7); /* Set GPIRQ7 (ISA IRQ7) to IRQ7 */ - write_mmcr_byte(SC520_GP8IMAP, SC520_IRQ8); /* Set GPIRQ8 (SIO IRQ8) to IRQ8 */ - write_mmcr_byte(SC520_GP9IMAP, SC520_IRQ9); /* Set GPIRQ9 (ISA IRQ2) to IRQ9 */ - write_mmcr_byte(SC520_GP0IMAP, SC520_IRQ11); /* Set GPIRQ0 (ISA IRQ11) to IRQ10 */ - write_mmcr_byte(SC520_GP2IMAP, SC520_IRQ12); /* Set GPIRQ2 (ISA IRQ12) to IRQ12 */ - write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ14); /* Set GPIRQ10 (ISA IRQ14) to IRQ14 */ - - write_mmcr_word(SC520_PCIHOSTMAP, 0x11f); /* Map PCI hostbridge INT to NMI */ - write_mmcr_word(SC520_ECCMAP, 0x100); /* Map SDRAM ECC failure INT to NMI */ - + sc520_mmcr->gp_int_map[1] = SC520_IRQ1; /* Set GPIRQ1 (SIO IRQ1) to IRQ1 */ + sc520_mmcr->gp_int_map[5] = SC520_IRQ5; /* Set GPIRQ5 (ISA IRQ5) to IRQ5 */ + sc520_mmcr->gp_int_map[6] = SC520_IRQ6; /* Set GPIRQ6 (ISA IRQ6) to IRQ6 */ + sc520_mmcr->gp_int_map[7] = SC520_IRQ7; /* Set GPIRQ7 (ISA IRQ7) to IRQ7 */ + sc520_mmcr->gp_int_map[8] = SC520_IRQ8; /* Set GPIRQ8 (SIO IRQ8) to IRQ8 */ + sc520_mmcr->gp_int_map[9] = SC520_IRQ9; /* Set GPIRQ9 (ISA IRQ2) to IRQ9 */ + sc520_mmcr->gp_int_map[0] = SC520_IRQ11; /* Set GPIRQ0 (ISA IRQ11) to IRQ10 */ + sc520_mmcr->gp_int_map[2] = SC520_IRQ12; /* Set GPIRQ2 (ISA IRQ12) to IRQ12 */ + sc520_mmcr->gp_int_map[10] = SC520_IRQ14; /* Set GPIRQ10 (ISA IRQ14) to IRQ14 */ + + sc520_mmcr->pcihostmap = 0x11f; /* Map PCI hostbridge INT to NMI */ + sc520_mmcr->eccmap = 0x100; /* Map SDRAM ECC failure INT to NMI */ } #ifdef CONFIG_PCI @@ -235,23 +234,22 @@ static void bus_init(void) { /* set up the GP IO pins */ - write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); /* set the GPIO pin function 31-16 reg */ - write_mmcr_word(SC520_PIOPFS15_0, 0xffff); /* set the GPIO pin function 15-0 reg */ - write_mmcr_byte(SC520_CSPFS, 0xf8); /* set the CS pin function reg */ - write_mmcr_byte(SC520_CLKSEL, 0x70); - - - write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */ - write_mmcr_byte(SC520_GPCSPW, 3); /* set the GP CS pulse width */ - write_mmcr_byte(SC520_GPCSOFF, 1); /* set the GP CS offset */ - write_mmcr_byte(SC520_GPRDW, 3); /* set the RD pulse width */ - write_mmcr_byte(SC520_GPRDOFF, 1); /* set the GP RD offset */ - write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */ - write_mmcr_byte(SC520_GPWROFF, 1); /* set the GP WR offset */ - - write_mmcr_word(SC520_BOOTCSCTL, 0x1823); /* set up timing of BOOTCS */ - write_mmcr_word(SC520_ROMCS1CTL, 0x1823); /* set up timing of ROMCS1 */ - write_mmcr_word(SC520_ROMCS2CTL, 0x1823); /* set up timing of ROMCS2 */ + sc520_mmcr->piopfs31_16 = 0xf7ff; /* set the GPIO pin function 31-16 reg */ + sc520_mmcr->piopfs15_0 = 0xffff; /* set the GPIO pin function 15-0 reg */ + sc520_mmcr->cspfs = 0xf8; /* set the CS pin function reg */ + sc520_mmcr->clksel = 0x70; + + sc520_mmcr->gpcsrt = 1; /* set the GP CS offset */ + sc520_mmcr->gpcspw = 3; /* set the GP CS pulse width */ + sc520_mmcr->gpcsoff = 1; /* set the GP CS offset */ + sc520_mmcr->gprdw = 3; /* set the RD pulse width */ + sc520_mmcr->gprdoff = 1; /* set the GP RD offset */ + sc520_mmcr->gpwrw = 3; /* set the GP WR pulse width */ + sc520_mmcr->gpwroff = 1; /* set the GP WR offset */ + + sc520_mmcr->bootcsctl = 0x1823; /* set up timing of BOOTCS */ + sc520_mmcr->romcs1ctl = 0x1823; /* set up timing of ROMCS1 */ + sc520_mmcr->romcs2ctl = 0x1823; /* set up timing of ROMCS2 */ /* adjust the memory map: * by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM @@ -260,31 +258,31 @@ static void bus_init(void) /* SRAM = GPCS3 128k @ d0000-effff*/ - write_mmcr_long(SC520_PAR2, 0x4e00400d); + sc520_mmcr->par[2] = 0x4e00400d; /* IDE0 = GPCS6 1f0-1f7 */ - write_mmcr_long(SC520_PAR3, 0x380801f0); + sc520_mmcr->par[3] = 0x380801f0; /* IDE1 = GPCS7 3f6 */ - write_mmcr_long(SC520_PAR4, 0x3c0003f6); + sc520_mmcr->par[4] = 0x3c0003f6; /* bootcs */ - write_mmcr_long(SC520_PAR12, 0x8bffe800); + sc520_mmcr->par[12] = 0x8bffe800; /* romcs2 */ - write_mmcr_long(SC520_PAR13, 0xcbfff000); + sc520_mmcr->par[13] = 0xcbfff000; /* romcs1 */ - write_mmcr_long(SC520_PAR14, 0xabfff800); + sc520_mmcr->par[14] = 0xabfff800; /* 680 LEDS */ - write_mmcr_long(SC520_PAR15, 0x30000640); + sc520_mmcr->par[15] = 0x30000640; - write_mmcr_byte(SC520_ADDDECCTL, 0); + sc520_mmcr->adddecctl = 0; asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */ if (CONFIG_SYS_USE_SIO_UART) { - write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | UART2_DIS|UART1_DIS); + sc520_mmcr->adddecctl = sc520_mmcr->adddecctl | UART2_DIS | UART1_DIS; setup_ali_sio(1); } else { - write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS)); + sc520_mmcr->adddecctl = sc520_mmcr->adddecctl & ~(UART2_DIS|UART1_DIS); setup_ali_sio(0); silence_uart(0x3e8); silence_uart(0x2e8); @@ -352,7 +350,7 @@ u32 isa_map_rom(u32 bus_addr, int size) PRINTF ("setting PAR11 to %x\n", par); /* Map rom 0x10000 with PAR1 */ - write_mmcr_long(SC520_PAR11, par); + sc520_mmcr->par[11] = par; return bus_addr; } @@ -364,8 +362,8 @@ u32 isa_map_rom(u32 bus_addr, int size) void isa_unmap_rom(u32 addr) { PRINTF("isa_unmap_rom asked to unmap %x", addr); - if ((addr>>12) == (read_mmcr_long(SC520_PAR11)&0x3ffff)) { - write_mmcr_long(SC520_PAR11, 0); + if ((addr>>12) == (sc520_mmcr->par[11] & 0x3ffff)) { + sc520_mmcr->par[11] = 0; PRINTF(" done\n"); return; } @@ -401,7 +399,7 @@ u32 pci_get_rom_window(struct pci_controller *hose, int size) PRINTF ("setting PAR1 to %x\n", par); /* Map rom 0x10000 with PAR1 */ - write_mmcr_long(SC520_PAR1, par); + sc520_mmcr->par[1] = par; return PCI_ROM_TEMP_SPACE; } @@ -414,7 +412,7 @@ void pci_remove_rom_window(struct pci_controller *hose, u32 addr) { PRINTF("pci_remove_rom_window: %x", addr); if (addr == PCI_ROM_TEMP_SPACE) { - write_mmcr_long(SC520_PAR1, 0); + sc520_mmcr->par[1] = 0; PRINTF(" done\n"); return; } @@ -432,11 +430,10 @@ void pci_remove_rom_window(struct pci_controller *hose, u32 addr) int pci_enable_legacy_video_ports(struct pci_controller *hose) { /* Map video memory to 0xa0000*/ - write_mmcr_long(SC520_PAR0, 0x7200400a); + sc520_mmcr->par[0] = 0x7200400a; /* forward all I/O accesses to PCI */ - write_mmcr_byte(SC520_ADDDECCTL, - read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI); + sc520_mmcr->adddecctl = sc520_mmcr->adddecctl | IO_HOLE_DEST_PCI; /* so we map away all io ports to pci (only way to access pci io @@ -446,32 +443,32 @@ int pci_enable_legacy_video_ports(struct pci_controller *hose) */ /* bring 0x100 - 0x1ef back to ISA using PAR5 */ - write_mmcr_long(SC520_PAR5, 0x30ef0100); + sc520_mmcr->par[5] = 0x30ef0100; /* IDE use 1f0-1f7 */ /* bring 0x1f8 - 0x2f7 back to ISA using PAR6 */ - write_mmcr_long(SC520_PAR6, 0x30ff01f8); + sc520_mmcr->par[6] = 0x30ff01f8; /* com2 use 2f8-2ff */ /* bring 0x300 - 0x3af back to ISA using PAR7 */ - write_mmcr_long(SC520_PAR7, 0x30af0300); + sc520_mmcr->par[7] = 0x30af0300; /* vga use 3b0-3bb */ /* bring 0x3bc - 0x3bf back to ISA using PAR8 */ - write_mmcr_long(SC520_PAR8, 0x300303bc); + sc520_mmcr->par[8] = 0x300303bc; /* vga use 3c0-3df */ /* bring 0x3e0 - 0x3f5 back to ISA using PAR9 */ - write_mmcr_long(SC520_PAR9, 0x301503e0); + sc520_mmcr->par[9] = 0x301503e0; /* ide use 3f6 */ /* bring 0x3f7 back to ISA using PAR10 */ - write_mmcr_long(SC520_PAR10, 0x300003f7); + sc520_mmcr->par[10] = 0x300003f7; /* com1 use 3f8-3ff */ @@ -490,12 +487,12 @@ int board_init(void) irq_init(); /* max drive current on SDRAM */ - write_mmcr_word(SC520_DSCTL, 0x0100); + sc520_mmcr->dsctl = 0x0100; /* enter debug mode after next reset (only if jumper is also set) */ - write_mmcr_byte(SC520_RESCFG, 0x08); + sc520_mmcr->rescfg = 0x08; /* configure the software timer to 33.333MHz */ - write_mmcr_byte(SC520_SWTMRCFG, 0); + sc520_mmcr->swtmrcfg = 0; gd->bus_clk = 33333000; return 0; diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c index 36a0a8e..dbb5c48 100644 --- a/board/sc520_spunk/sc520_spunk.c +++ b/board/sc520_spunk/sc520_spunk.c @@ -47,53 +47,54 @@ DECLARE_GLOBAL_DATA_PTR; static void irq_init(void) { /* disable global interrupt mode */ - write_mmcr_byte(SC520_PICICR, 0x40); + sc520_mmcr->picicr = 0x40; /* set all irqs to edge */ - write_mmcr_byte(SC520_MPICMODE, 0x00); - write_mmcr_byte(SC520_SL1PICMODE, 0x00); - write_mmcr_byte(SC520_SL2PICMODE, 0x00); + sc520_mmcr->pic_mode[0] = 0x00; + sc520_mmcr->pic_mode[1] = 0x00; + sc520_mmcr->pic_mode[2] = 0x00; /* active low polarity on PIC interrupt pins, * active high polarity on all other irq pins */ - write_mmcr_word(SC520_INTPINPOL, 0x0000); + sc520_mmcr->intpinpol = 0x0000; /* set irq number mapping */ - write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED); /* disable GP timer 0 INT */ - write_mmcr_byte(SC520_GPTMR1MAP, SC520_IRQ_DISABLED); /* disable GP timer 1 INT */ - write_mmcr_byte(SC520_GPTMR2MAP, SC520_IRQ_DISABLED); /* disable GP timer 2 INT */ - write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT timer 0 INT to IRQ0 */ - write_mmcr_byte(SC520_PIT1MAP, SC520_IRQ_DISABLED); /* disable PIT timer 1 INT */ - write_mmcr_byte(SC520_PIT2MAP, SC520_IRQ_DISABLED); /* disable PIT timer 2 INT */ - write_mmcr_byte(SC520_PCIINTAMAP, SC520_IRQ_DISABLED); /* disable PCI INT A */ - write_mmcr_byte(SC520_PCIINTBMAP, SC520_IRQ_DISABLED); /* disable PCI INT B */ - write_mmcr_byte(SC520_PCIINTCMAP, SC520_IRQ_DISABLED); /* disable PCI INT C */ - write_mmcr_byte(SC520_PCIINTDMAP, SC520_IRQ_DISABLED); /* disable PCI INT D */ - write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */ - write_mmcr_byte(SC520_SSIMAP, SC520_IRQ6); /* Set Synchronius serial INT to IRQ6*/ - write_mmcr_byte(SC520_WDTMAP, SC520_IRQ_DISABLED); /* disable Watchdog INT */ - write_mmcr_byte(SC520_RTCMAP, SC520_IRQ8); /* Set RTC int to 8 */ - write_mmcr_byte(SC520_WPVMAP, SC520_IRQ_DISABLED); /* disable write protect INT */ - write_mmcr_byte(SC520_ICEMAP, SC520_IRQ1); /* Set ICE Debug Serielport INT to IRQ1 */ - write_mmcr_byte(SC520_FERRMAP,SC520_IRQ13); /* Set FP error INT to IRQ13 */ - - write_mmcr_byte(SC520_UART1MAP, SC520_IRQ4); /* Set internal UART2 INT to IRQ4 */ - write_mmcr_byte(SC520_UART2MAP, SC520_IRQ3); /* Set internal UART2 INT to IRQ3 */ - - write_mmcr_byte(SC520_GP0IMAP, SC520_IRQ7); /* Set GPIRQ0 (PC-Card AUX IRQ) to IRQ7 */ - write_mmcr_byte(SC520_GP1IMAP, SC520_IRQ14); /* Set GPIRQ1 (CF IRQ) to IRQ14 */ - write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ5); /* Set GPIRQ3 ( CAN IRQ ) ti IRQ5 */ - write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ_DISABLED); /* disbale GIRQ4 ( IRR IRQ ) */ - write_mmcr_byte(SC520_GP5IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ5 */ - write_mmcr_byte(SC520_GP6IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ6 */ - write_mmcr_byte(SC520_GP7IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ7 */ - write_mmcr_byte(SC520_GP8IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ8 */ - write_mmcr_byte(SC520_GP9IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ9 */ - write_mmcr_byte(SC520_GP2IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ2 */ - write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ_DISABLED); /* disable GPIRQ10 */ - - write_mmcr_word(SC520_PCIHOSTMAP, 0x11f); /* Map PCI hostbridge INT to NMI */ - write_mmcr_word(SC520_ECCMAP, 0x100); /* Map SDRAM ECC failure INT to NMI */ + sc520_mmcr->gp_tmr_int_map[0] = SC520_IRQ_DISABLED; /* disable GP timer 0 INT */ + sc520_mmcr->gp_tmr_int_map[1] = SC520_IRQ_DISABLED; /* disable GP timer 1 INT */ + sc520_mmcr->gp_tmr_int_map[2] = SC520_IRQ_DISABLED; /* disable GP timer 2 INT */ + sc520_mmcr->pit_int_map[0] = SC520_IRQ0; /* Set PIT timer 0 INT to IRQ0 */ + sc520_mmcr->pit_int_map[1] = SC520_IRQ_DISABLED; /* disable PIT timer 1 INT */ + sc520_mmcr->pit_int_map[2] = SC520_IRQ_DISABLED; /* disable PIT timer 2 INT */ + sc520_mmcr->pci_int_map[0] = SC520_IRQ_DISABLED; /* disable PCI INT A */ + sc520_mmcr->pci_int_map[1] = SC520_IRQ_DISABLED; /* disable PCI INT B */ + sc520_mmcr->pci_int_map[2] = SC520_IRQ_DISABLED; /* disable PCI INT C */ + sc520_mmcr->pci_int_map[3] = SC520_IRQ_DISABLED; /* disable PCI INT D */ + sc520_mmcr->dmabcintmap = SC520_IRQ_DISABLED; /* disable DMA INT */ + sc520_mmcr->ssimap = SC520_IRQ6; /* Set Synchronius serial INT to IRQ6*/ + sc520_mmcr->wdtmap = SC520_IRQ_DISABLED; /* disable Watchdog INT */ + sc520_mmcr->rtcmap = SC520_IRQ8; /* Set RTC int to 8 */ + sc520_mmcr->wpvmap = SC520_IRQ_DISABLED; /* disable write protect INT */ + sc520_mmcr->icemap = SC520_IRQ1; /* Set ICE Debug Serielport INT to IRQ1 */ + sc520_mmcr->ferrmap = SC520_IRQ13; /* Set FP error INT to IRQ13 */ + + + sc520_mmcr->uart_int_map[0] = SC520_IRQ4; /* Set internal UART1 INT to IRQ4 */ + sc520_mmcr->uart_int_map[1] = SC520_IRQ3; /* Set internal UART2 INT to IRQ3 */ + + sc520_mmcr->gp_int_map[0] = SC520_IRQ7; /* Set GPIRQ0 (PC-Card AUX IRQ) to IRQ7 */ + sc520_mmcr->gp_int_map[1] = SC520_IRQ14; /* Set GPIRQ1 (CF IRQ) to IRQ14 */ + sc520_mmcr->gp_int_map[3] = SC520_IRQ5; /* Set GPIRQ3 ( CAN IRQ ) ti IRQ5 */ + sc520_mmcr->gp_int_map[4] = SC520_IRQ_DISABLED; /* disbale GIRQ4 ( IRR IRQ ) */ + sc520_mmcr->gp_int_map[5] = SC520_IRQ_DISABLED; /* disable GPIRQ5 */ + sc520_mmcr->gp_int_map[6] = SC520_IRQ_DISABLED; /* disable GPIRQ6 */ + sc520_mmcr->gp_int_map[7] = SC520_IRQ_DISABLED; /* disable GPIRQ7 */ + sc520_mmcr->gp_int_map[8] = SC520_IRQ_DISABLED; /* disable GPIRQ8 */ + sc520_mmcr->gp_int_map[9] = SC520_IRQ_DISABLED; /* disable GPIRQ9 */ + sc520_mmcr->gp_int_map[2] = SC520_IRQ_DISABLED; /* disable GPIRQ2 */ + sc520_mmcr->gp_int_map[10] = SC520_IRQ_DISABLED; /* disable GPIRQ10 */ + + sc520_mmcr->pcihostmap = 0x11f; /* Map PCI hostbridge INT to NMI */ + sc520_mmcr->eccmap = 0x100; /* Map SDRAM ECC failure INT to NMI */ } @@ -101,7 +102,7 @@ static void irq_init(void) /* PCI stuff */ static void pci_sc520_spunk_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { - int version = read_mmcr_byte(SC520_SYSINFO); + int version = sc520_mmcr->sysinfo; /* a configurable lists of irqs to steal * when we need one (a board with more pci interrupt pins @@ -255,41 +256,41 @@ static void bus_init(void) * ?? Hyglo version 0.97 (small board) * 10 Spunk board */ - int version = read_mmcr_byte(SC520_SYSINFO); + int version = sc520_mmcr->sysinfo; if (version) { /* set up the GP IO pins (for the Spunk board) */ - write_mmcr_word(SC520_PIOPFS31_16, 0xfff0); /* set the GPIO pin function 31-16 reg */ - write_mmcr_word(SC520_PIOPFS15_0, 0x000f); /* set the GPIO pin function 15-0 reg */ - write_mmcr_word(SC520_PIODIR31_16, 0x000f); /* set the GPIO direction 31-16 reg */ - write_mmcr_word(SC520_PIODIR15_0, 0x1ff0); /* set the GPIO direction 15-0 reg */ - write_mmcr_byte(SC520_CSPFS, 0xc0); /* set the CS pin function reg */ - write_mmcr_byte(SC520_CLKSEL, 0x70); + sc520_mmcr->piopfs31_16 = 0xfff0; /* set the GPIO pin function 31-16 reg */ + sc520_mmcr->piopfs15_0 = 0x000f; /* set the GPIO pin function 15-0 reg */ + sc520_mmcr->piodir31_16 = 0x000f; /* set the GPIO direction 31-16 reg */ + sc520_mmcr->piodir15_0 = 0x1ff0; /* set the GPIO direction 15-0 reg */ + sc520_mmcr->cspfs = 0xc0; /* set the CS pin function reg */ + sc520_mmcr->clksel = 0x70; - write_mmcr_word(SC520_PIOCLR31_16, 0x0003); /* reset SSI chip-selects */ - write_mmcr_word(SC520_PIOSET31_16, 0x000c); + sc520_mmcr->pioclr31_16 = 0x0003; /* reset SSI chip-selects */ + sc520_mmcr->pioset31_16 = 0x000c; } else { /* set up the GP IO pins (for the Hyglo board) */ - write_mmcr_word(SC520_PIOPFS31_16, 0xffc0); /* set the GPIO pin function 31-16 reg */ - write_mmcr_word(SC520_PIOPFS15_0, 0x1e7f); /* set the GPIO pin function 15-0 reg */ - write_mmcr_word(SC520_PIODIR31_16, 0x003f); /* set the GPIO direction 31-16 reg */ - write_mmcr_word(SC520_PIODIR15_0, 0xe180); /* set the GPIO direction 15-0 reg */ - write_mmcr_byte(SC520_CSPFS, 0x00); /* set the CS pin function reg */ - write_mmcr_byte(SC520_CLKSEL, 0x70); - - write_mmcr_word(SC520_PIOCLR15_0, 0x0180); /* reset SSI chip-selects */ + sc520_mmcr->piopfs31_16 = 0xffc0; /* set the GPIO pin function 31-16 reg */ + sc520_mmcr->piopfs15_0 = 0x1e7f; /* set the GPIO pin function 15-0 reg */ + sc520_mmcr->piodir31_16 = 0x003f; /* set the GPIO direction 31-16 reg */ + sc520_mmcr->piodir15_0 = 0xe180; /* set the GPIO direction 15-0 reg */ + sc520_mmcr->cspfs = 0x00; /* set the CS pin function reg */ + sc520_mmcr->clksel = 0x70; + + sc520_mmcr->pioclr15_0 = 0x0180; /* reset SSI chip-selects */ } - write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */ - write_mmcr_byte(SC520_GPCSPW, 3); /* set the GP CS pulse width */ - write_mmcr_byte(SC520_GPCSOFF, 1); /* set the GP CS offset */ - write_mmcr_byte(SC520_GPRDW, 3); /* set the RD pulse width */ - write_mmcr_byte(SC520_GPRDOFF, 1); /* set the GP RD offset */ - write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */ - write_mmcr_byte(SC520_GPWROFF, 1); /* set the GP WR offset */ + sc520_mmcr->gpcsrt = 1; /* set the GP CS offset */ + sc520_mmcr->gpcspw = 3; /* set the GP CS pulse width */ + sc520_mmcr->gpcsoff = 1; /* set the GP CS offset */ + sc520_mmcr->gprdw = 3; /* set the RD pulse width */ + sc520_mmcr->gprdoff = 1; /* set the GP RD offset */ + sc520_mmcr->gpwrw = 3; /* set the GP WR pulse width */ + sc520_mmcr->gpwroff = 1; /* set the GP WR offset */ - write_mmcr_word(SC520_BOOTCSCTL, 0x0407); /* set up timing of BOOTCS */ + sc520_mmcr->bootcsctl = 0x0407; /* set up timing of BOOTCS */ /* adjust the memory map: * by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM @@ -298,17 +299,17 @@ static void bus_init(void) /* bootcs */ - write_mmcr_long(SC520_PAR12, 0x8bffe800); + sc520_mmcr->par[12] = 0x8bffe800; /* IDE0 = GPCS6 1f0-1f7 */ - write_mmcr_long(SC520_PAR3, 0x380801f0); + sc520_mmcr->par[3] = 0x380801f0; /* IDE1 = GPCS7 3f6 */ - write_mmcr_long(SC520_PAR4, 0x3c0003f6); + sc520_mmcr->par[4] = 0x3c0003f6; asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */ - write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS)); + sc520_mmcr->adddecctl = sc520_mmcr->adddecctl & ~(UART2_DIS|UART1_DIS); } @@ -361,7 +362,7 @@ u32 isa_map_rom(u32 bus_addr, int size) printf ("setting PAR11 to %x\n", par); /* Map rom 0x10000 with PAR1 */ - write_mmcr_long(SC520_PAR11, par); + sc520_mmcr->par[11] = par; return bus_addr; } @@ -373,8 +374,8 @@ u32 isa_map_rom(u32 bus_addr, int size) void isa_unmap_rom(u32 addr) { printf("isa_unmap_rom asked to unmap %x", addr); - if ((addr>>12) == (read_mmcr_long(SC520_PAR11)&0x3ffff)) { - write_mmcr_long(SC520_PAR11, 0); + if ((addr>>12) == (sc520_mmcr->par[11] & 0x3ffff)) { + sc520_mmcr->par[11] = 0; printf(" done\n"); return; } @@ -410,7 +411,7 @@ u32 pci_get_rom_window(struct pci_controller *hose, int size) printf ("setting PAR1 to %x\n", par); /* Map rom 0x10000 with PAR1 */ - write_mmcr_long(SC520_PAR1, par); + sc520_mmcr->par[1] = par; return PCI_ROM_TEMP_SPACE; } @@ -423,7 +424,7 @@ void pci_remove_rom_window(struct pci_controller *hose, u32 addr) { printf("pci_remove_rom_window: %x", addr); if (addr == PCI_ROM_TEMP_SPACE) { - write_mmcr_long(SC520_PAR1, 0); + sc520_mmcr->par[1] = 0; printf(" done\n"); return; } @@ -441,11 +442,10 @@ void pci_remove_rom_window(struct pci_controller *hose, u32 addr) int pci_enable_legacy_video_ports(struct pci_controller *hose) { /* Map video memory to 0xa0000*/ - write_mmcr_long(SC520_PAR0, 0x7200400a); + sc520_mmcr->par[0] = 0x7200400a; /* forward all I/O accesses to PCI */ - write_mmcr_byte(SC520_ADDDECCTL, - read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI); + sc520_mmcr->adddecctl = sc520_mmcr->adddecctl | IO_HOLE_DEST_PCI; /* so we map away all io ports to pci (only way to access pci io @@ -455,22 +455,22 @@ int pci_enable_legacy_video_ports(struct pci_controller *hose) */ /* bring 0x100 - 0x2f7 back to ISA using PAR5 */ - write_mmcr_long(SC520_PAR5, 0x31f70100); + sc520_mmcr->par[5] = 0x31f70100; /* com2 use 2f8-2ff */ /* bring 0x300 - 0x3af back to ISA using PAR7 */ - write_mmcr_long(SC520_PAR7, 0x30af0300); + sc520_mmcr->par[7] = 0x30af0300; /* vga use 3b0-3bb */ /* bring 0x3bc - 0x3bf back to ISA using PAR8 */ - write_mmcr_long(SC520_PAR8, 0x300303bc); + sc520_mmcr->par[8] = 0x300303bc; /* vga use 3c0-3df */ /* bring 0x3e0 - 0x3f7 back to ISA using PAR9 */ - write_mmcr_long(SC520_PAR9, 0x301703e0); + sc520_mmcr->par[9] = 0x301703e0; /* com1 use 3f8-3ff */ @@ -489,12 +489,12 @@ int board_init(void) irq_init(); /* max drive current on SDRAM */ - write_mmcr_word(SC520_DSCTL, 0x0100); + sc520_mmcr->dsctl = 0x0100; /* enter debug mode after next reset (only if jumper is also set) */ - write_mmcr_byte(SC520_RESCFG, 0x08); + sc520_mmcr->rescfg = 0x08; /* configure the software timer to 33.000MHz */ - write_mmcr_byte(SC520_SWTMRCFG, 1); + sc520_mmcr->swtmrcfg = 1; gd->bus_clk = 33000000; return 0; @@ -508,17 +508,15 @@ int dram_init(void) void show_boot_progress(int val) { - int version = read_mmcr_byte(SC520_SYSINFO); + int version = sc520_mmcr->sysinfo; if (val < -32) val = -1; /* let things compatible */ if (version == 0) { /* PIO31-PIO16 Data */ - write_mmcr_word(SC520_PIODATA31_16, - (read_mmcr_word(SC520_PIODATA31_16) & 0xffc0)| ((val&0x7e)>>1)); /* 0x1f8 >> 3 */ + sc520_mmcr->piodata31_16 = (sc520_mmcr->piodata31_16 & 0xffc0) | ((val&0x7e)>>1); /* 0x1f8 >> 3 */ /* PIO0-PIO15 Data */ - write_mmcr_word(SC520_PIODATA15_0, - (read_mmcr_word(SC520_PIODATA15_0) & 0x1fff)| ((val&0x7)<<13)); + sc520_mmcr->piodata15_0 = (sc520_mmcr->piodata15_0 & 0x1fff)| ((val&0x7)<<13); } else { /* newer boards use PIO4-PIO12 */ /* PIO0-PIO15 Data */ @@ -527,8 +525,7 @@ void show_boot_progress(int val) #else val = (val & 0x007) | ((val & 0x07e) << 2); #endif - write_mmcr_word(SC520_PIODATA15_0, - (read_mmcr_word(SC520_PIODATA15_0) & 0xe00f) | ((val&0x01ff)<<4)); + sc520_mmcr->piodata15_0 = (sc520_mmcr->piodata15_0 & 0xe00f) | ((val&0x01ff)<<4); } } @@ -536,7 +533,7 @@ void show_boot_progress(int val) int last_stage_init(void) { - int version = read_mmcr_byte(SC520_SYSINFO); + int version = sc520_mmcr->sysinfo; printf("Omicron Ceti SC520 Spunk revision %x\n", version); @@ -587,30 +584,30 @@ int last_stage_init(void) void ssi_chip_select(int dev) { - int version = read_mmcr_byte(SC520_SYSINFO); + int version = sc520_mmcr->sysinfo; if (version) { /* Spunk board: EEPROM and CAN are actove-low, TEMP and AUX are active high */ switch (dev) { case 1: /* EEPROM */ - write_mmcr_word(SC520_PIOCLR31_16, 0x0004); + sc520_mmcr->pioclr31_16 = 0x0004; break; case 2: /* Temp Probe */ - write_mmcr_word(SC520_PIOSET31_16, 0x0002); + sc520_mmcr->pioset31_16 = 0x0002; break; case 3: /* CAN */ - write_mmcr_word(SC520_PIOCLR31_16, 0x0008); + sc520_mmcr->pioclr31_16 = 0x0008; break; case 4: /* AUX */ - write_mmcr_word(SC520_PIOSET31_16, 0x0001); + sc520_mmcr->pioset31_16 = 0x0001; break; case 0: - write_mmcr_word(SC520_PIOCLR31_16, 0x0003); - write_mmcr_word(SC520_PIOSET31_16, 0x000c); + sc520_mmcr->pioclr31_16 = 0x0003; + sc520_mmcr->pioset31_16 = 0x000c; break; default: @@ -622,15 +619,15 @@ void ssi_chip_select(int dev) switch (dev) { case 1: /* EEPROM */ - write_mmcr_word(SC520_PIOSET15_0, 0x0100); + sc520_mmcr->pioset15_0 = 0x0100; break; case 2: /* Temp Probe */ - write_mmcr_word(SC520_PIOSET15_0, 0x0080); + sc520_mmcr->pioset15_0 = 0x0080; break; case 0: - write_mmcr_word(SC520_PIOCLR15_0, 0x0180); + sc520_mmcr->pioclr15_0 = 0x0180; break; default: @@ -669,9 +666,7 @@ int mw_eeprom_write(int x, int offset, uchar *buffer, int len) void spi_init_f(void) { - read_mmcr_byte(SC520_SYSINFO) ? - spi_eeprom_probe(1) : - mw_eeprom_probe(1); + sc520_mmcr->sysinfo ? spi_eeprom_probe(1) : mw_eeprom_probe(1); } @@ -686,7 +681,7 @@ ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len) offset |= addr[i]; } - return read_mmcr_byte(SC520_SYSINFO) ? + return sc520_mmcr->sysinfo ? spi_eeprom_read(1, offset, buffer, len) : mw_eeprom_read(1, offset, buffer, len); } @@ -702,7 +697,7 @@ ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len) offset |= addr[i]; } - return read_mmcr_byte(SC520_SYSINFO) ? + return sc520_mmcr->sysinfo ? spi_eeprom_write(1, offset, buffer, len) : mw_eeprom_write(1, offset, buffer, len); } diff --git a/cpu/i386/sc520/sc520.c b/cpu/i386/sc520/sc520.c index 1d79210..4b566a7 100644 --- a/cpu/i386/sc520/sc520.c +++ b/cpu/i386/sc520/sc520.c @@ -33,75 +33,35 @@ DECLARE_GLOBAL_DATA_PTR; /* * utility functions for boards based on the AMD sc520 * - * void write_mmcr_byte(u16 mmcr, u8 data) - * void write_mmcr_word(u16 mmcr, u16 data) - * void write_mmcr_long(u16 mmcr, u32 data) - * - * u8 read_mmcr_byte(u16 mmcr) - * u16 read_mmcr_word(u16 mmcr) - * u32 read_mmcr_long(u16 mmcr) - * * void init_sc520(void) * unsigned long init_sc520_dram(void) */ -static u32 mmcr_base= 0xfffef000; - -void write_mmcr_byte(u16 mmcr, u8 data) -{ - writeb(data, mmcr+mmcr_base); -} - -void write_mmcr_word(u16 mmcr, u16 data) -{ - writew(data, mmcr+mmcr_base); -} - -void write_mmcr_long(u16 mmcr, u32 data) -{ - writel(data, mmcr+mmcr_base); -} - -u8 read_mmcr_byte(u16 mmcr) -{ - return readb(mmcr+mmcr_base); -} - -u16 read_mmcr_word(u16 mmcr) -{ - return readw(mmcr+mmcr_base); -} - -u32 read_mmcr_long(u16 mmcr) -{ - return readl(mmcr+mmcr_base); -} - +volatile sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)0xfffef000; void init_sc520(void) { /* Set the UARTxCTL register at it's slower, * baud clock giving us a 1.8432 MHz reference */ - write_mmcr_byte(SC520_UART1CTL, 7); - write_mmcr_byte(SC520_UART2CTL, 7); + sc520_mmcr->uart1ctl = 0x07; + sc520_mmcr->uart2ctl = 0x07; /* first set the timer pin mapping */ - write_mmcr_byte(SC520_CLKSEL, 0x72); /* no clock frequency selected, use 1.1892MHz */ + sc520_mmcr->clksel = 0x72; /* no clock frequency selected, use 1.1892MHz */ /* enable PCI bus arbitrer */ - write_mmcr_byte(SC520_SYSARBCTL,0x02); /* enable concurrent mode */ - - write_mmcr_word(SC520_SYSARBMENB,0x1f); /* enable external grants */ - write_mmcr_word(SC520_HBCTL,0x04); /* enable posted-writes */ + sc520_mmcr->sysarbctl = 0x02; /* enable concurrent mode */ + sc520_mmcr->sysarbmenb = 0x1f; /* enable external grants */ + sc520_mmcr->hbctl = 0x04; /* enable posted-writes */ if (CONFIG_SYS_SC520_HIGH_SPEED) { - write_mmcr_byte(SC520_CPUCTL, 0x2); /* set it to 133 MHz and write back */ + sc520_mmcr->cpuctl = 0x02; /* set it to 133 MHz and write back */ gd->cpu_clk = 133000000; printf("## CPU Speed set to 133MHz\n"); } else { - write_mmcr_byte(SC520_CPUCTL, 1); /* set CPU to 100 MHz and write back cache */ + sc520_mmcr->cpuctl = 0x01; /* set it to 100 MHz and write back */ printf("## CPU Speed set to 100MHz\n"); gd->cpu_clk = 100000000; } @@ -114,7 +74,7 @@ void init_sc520(void) "loop 0b\n": : : "ecx"); /* turn on the SDRAM write buffer */ - write_mmcr_byte(SC520_DBCTL, 0x11); + sc520_mmcr->dbctl = 0x11; /* turn on the cache and disable write through */ asm("movl %%cr0, %%eax\n" @@ -156,10 +116,9 @@ unsigned long init_sc520_dram(void) val = 3; /* 62.4us */ } - write_mmcr_byte(SC520_DRCCTL, (read_mmcr_byte(SC520_DRCCTL) & 0xcf) | (val<<4)); + sc520_mmcr->drcctl = (sc520_mmcr->drcctl & 0xcf) | (val<<4); - val = read_mmcr_byte(SC520_DRCTMCTL); - val &= 0xf0; + val = sc520_mmcr->drctmctl & 0xf0; if (cas_precharge_delay==3) { val |= 0x04; /* 3T */ @@ -174,12 +133,12 @@ unsigned long init_sc520_dram(void) } else { val |= 1; } - write_mmcr_byte(SC520_DRCTMCTL, val); + sc520_mmcr->drctmctl = val; #endif /* We read-back the configuration of the dram * controller that the assembly code wrote */ - dram_ctrl = read_mmcr_long(SC520_DRCBENDADR); + dram_ctrl = sc520_mmcr->drcbendadr; bd->bi_dram[0].start = 0; if (dram_ctrl & 0x80) { @@ -232,7 +191,7 @@ void reset_cpu(ulong addr) { printf("Resetting using SC520 MMCR\n"); /* Write a '1' to the SYS_RST of the RESCFG MMCR */ - write_mmcr_word(SC520_RESCFG, 0x0001); + sc520_mmcr->rescfg = 0x01; /* NOTREACHED */ } diff --git a/cpu/i386/sc520/sc520_pci.c b/cpu/i386/sc520/sc520_pci.c index 871ad0a..f446c6d 100644 --- a/cpu/i386/sc520/sc520_pci.c +++ b/cpu/i386/sc520/sc520_pci.c @@ -33,23 +33,23 @@ static struct { u16 level_reg; u8 level_bit; } sc520_irq[] = { - { SC520_IRQ0, SC520_MPICMODE, 0x01 }, - { SC520_IRQ1, SC520_MPICMODE, 0x02 }, - { SC520_IRQ2, SC520_SL1PICMODE, 0x02 }, - { SC520_IRQ3, SC520_MPICMODE, 0x08 }, - { SC520_IRQ4, SC520_MPICMODE, 0x10 }, - { SC520_IRQ5, SC520_MPICMODE, 0x20 }, - { SC520_IRQ6, SC520_MPICMODE, 0x40 }, - { SC520_IRQ7, SC520_MPICMODE, 0x80 }, - - { SC520_IRQ8, SC520_SL1PICMODE, 0x01 }, - { SC520_IRQ9, SC520_SL1PICMODE, 0x02 }, - { SC520_IRQ10, SC520_SL1PICMODE, 0x04 }, - { SC520_IRQ11, SC520_SL1PICMODE, 0x08 }, - { SC520_IRQ12, SC520_SL1PICMODE, 0x10 }, - { SC520_IRQ13, SC520_SL1PICMODE, 0x20 }, - { SC520_IRQ14, SC520_SL1PICMODE, 0x40 }, - { SC520_IRQ15, SC520_SL1PICMODE, 0x80 } + { SC520_IRQ0, 0, 0x01 }, + { SC520_IRQ1, 0, 0x02 }, + { SC520_IRQ2, 1, 0x02 }, + { SC520_IRQ3, 0, 0x08 }, + { SC520_IRQ4, 0, 0x10 }, + { SC520_IRQ5, 0, 0x20 }, + { SC520_IRQ6, 0, 0x40 }, + { SC520_IRQ7, 0, 0x80 }, + + { SC520_IRQ8, 1, 0x01 }, + { SC520_IRQ9, 1, 0x02 }, + { SC520_IRQ10, 1, 0x04 }, + { SC520_IRQ11, 1, 0x08 }, + { SC520_IRQ12, 1, 0x10 }, + { SC520_IRQ13, 1, 0x20 }, + { SC520_IRQ14, 1, 0x40 }, + { SC520_IRQ15, 1, 0x80 } }; @@ -77,34 +77,34 @@ int pci_sc520_set_irq(int pci_pin, int irq) /* first disable any non-pci interrupt source that use * this level */ - for (i=SC520_GPTMR0MAP;i<=SC520_GP10IMAP;i++) { - if (i>=SC520_PCIINTAMAP&&i<=SC520_PCIINTDMAP) { - continue; - } - if (read_mmcr_byte(i) == sc520_irq[irq].priority) { - write_mmcr_byte(i, SC520_IRQ_DISABLED); - } + + /* PCI interrupt mapping (A through D)*/ + for (i=0; i<=3 ;i++) { + if (sc520_mmcr->pci_int_map[i] == sc520_irq[irq].priority) + sc520_mmcr->pci_int_map[i] = SC520_IRQ_DISABLED; + } + + /* GP IRQ interrupt mapping */ + for (i=0; i<=10 ;i++) { + if (sc520_mmcr->gp_int_map[i] == sc520_irq[irq].priority) + sc520_mmcr->gp_int_map[i] = SC520_IRQ_DISABLED; } /* Set the trigger to level */ - write_mmcr_byte(sc520_irq[irq].level_reg, - read_mmcr_byte(sc520_irq[irq].level_reg) | sc520_irq[irq].level_bit); + sc520_mmcr->pic_mode[sc520_irq[irq].level_reg] = + sc520_mmcr->pic_mode[sc520_irq[irq].level_reg] | sc520_irq[irq].level_bit; if (pci_pin < 4) { /* PCI INTA-INTD */ /* route the interrupt */ - write_mmcr_byte(SC520_PCIINTAMAP + pci_pin, sc520_irq[irq].priority); - - + sc520_mmcr->pci_int_map[pci_pin] = sc520_irq[irq].priority; } else { /* GPIRQ0-GPIRQ10 used for additional PCI INTS */ - write_mmcr_byte(SC520_GP0IMAP + pci_pin - 4, sc520_irq[irq].priority); + sc520_mmcr->gp_int_map[pci_pin - 4] = sc520_irq[irq].priority; /* also set the polarity in this case */ - write_mmcr_word(SC520_INTPINPOL, - read_mmcr_word(SC520_INTPINPOL) | (1 << (pci_pin-4))); - + sc520_mmcr->intpinpol = sc520_mmcr->intpinpol | (1 << (pci_pin-4)); } /* register the pin */ diff --git a/cpu/i386/sc520/sc520_ssi.c b/cpu/i386/sc520/sc520_ssi.c index dd667ca..8dbe17a 100644 --- a/cpu/i386/sc520/sc520_ssi.c +++ b/cpu/i386/sc520/sc520_ssi.c @@ -61,32 +61,34 @@ int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase) temp |= PHS_INV_ENB; } - write_mmcr_byte(SC520_SSICTL, temp); + sc520_mmcr->ssictl = temp; return 0; } u8 ssi_txrx_byte(u8 data) { - write_mmcr_byte(SC520_SSIXMIT, data); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMITRCV); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - return read_mmcr_byte(SC520_SSIRCV); + sc520_mmcr->ssixmit = data; + while (sc520_mmcr->ssista & SSISTA_BSY); + sc520_mmcr->ssicmd = SSICMD_CMD_SEL_XMITRCV; + while (sc520_mmcr->ssista & SSISTA_BSY); + + return sc520_mmcr->ssircv; } void ssi_tx_byte(u8 data) { - write_mmcr_byte(SC520_SSIXMIT, data); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMIT); + sc520_mmcr->ssixmit = data; + while (sc520_mmcr->ssista & SSISTA_BSY); + sc520_mmcr->ssicmd = SSICMD_CMD_SEL_XMIT; } u8 ssi_rx_byte(void) { - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_RCV); - while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY); - return read_mmcr_byte(SC520_SSIRCV); + while (sc520_mmcr->ssista & SSISTA_BSY); + sc520_mmcr->ssicmd = SSICMD_CMD_SEL_RCV; + while (sc520_mmcr->ssista & SSISTA_BSY); + + return sc520_mmcr->ssircv; } diff --git a/cpu/i386/sc520/sc520_timer.c b/cpu/i386/sc520/sc520_timer.c index 2a3425b..23de14b 100644 --- a/cpu/i386/sc520/sc520_timer.c +++ b/cpu/i386/sc520/sc520_timer.c @@ -30,29 +30,29 @@ void sc520_timer_isr(void) { /* Ack the GP Timer Interrupt */ - write_mmcr_byte (SC520_GPTMRSTA, 0x02); + sc520_mmcr->gptmrsta = 0x02; } int timer_init(void) { /* Map GP Timer 1 to Master PIC IR0 */ - write_mmcr_byte (SC520_GPTMR1MAP, 0x01); + sc520_mmcr->gp_tmr_int_map[1] = 0x01; /* Disable GP Timers 1 & 2 - Allow configuration writes */ - write_mmcr_word (SC520_GPTMR1CTL, 0x4000); - write_mmcr_word (SC520_GPTMR2CTL, 0x4000); + sc520_mmcr->gptmr1ctl = 0x4000; + sc520_mmcr->gptmr2ctl = 0x4000; /* Reset GP Timers 1 & 2 */ - write_mmcr_word (SC520_GPTMR1CNT, 0x0000); - write_mmcr_word (SC520_GPTMR2CNT, 0x0000); + sc520_mmcr->gptmr1cnt = 0x0000; + sc520_mmcr->gptmr2cnt = 0x0000; /* Setup GP Timer 2 as a 100kHz (10us) prescaler */ - write_mmcr_word (SC520_GPTMR2MAXCMPA, 83); - write_mmcr_word (SC520_GPTMR2CTL, 0xc001); + sc520_mmcr->gptmr2maxcmpa = 83; + sc520_mmcr->gptmr2ctl = 0xc001; /* Setup GP Timer 1 as a 1000 Hz (1ms) interrupt generator */ - write_mmcr_word (SC520_GPTMR1MAXCMPA, 100); - write_mmcr_word (SC520_GPTMR1CTL, 0xe009); + sc520_mmcr->gptmr1maxcmpa = 100; + sc520_mmcr->gptmr1ctl = 0xe009; /* Register the SC520 specific timer interrupt handler */ register_timer_isr (sc520_timer_isr); @@ -62,7 +62,7 @@ int timer_init(void) unmask_irq (0); /* Clear the GP Timer 1 status register to get the show rolling*/ - write_mmcr_byte (SC520_GPTMRSTA, 0x02); + sc520_mmcr->gptmrsta = 0x02; return 0; } @@ -71,12 +71,13 @@ void udelay(unsigned long usec) { int m = 0; long u; + long temp; - read_mmcr_word (SC520_SWTMRMILLI); - read_mmcr_word (SC520_SWTMRMICRO); + temp = sc520_mmcr->swtmrmilli; + temp = sc520_mmcr->swtmrmicro; do { - m += read_mmcr_word (SC520_SWTMRMILLI); - u = read_mmcr_word (SC520_SWTMRMICRO) + (m * 1000); + m += sc520_mmcr->swtmrmilli; + u = sc520_mmcr->swtmrmicro + (m * 1000); } while (u < usec); } diff --git a/include/asm-i386/ic/sc520.h b/include/asm-i386/ic/sc520.h index bf39516..57c9904 100644 --- a/include/asm-i386/ic/sc520.h +++ b/include/asm-i386/ic/sc520.h @@ -24,179 +24,243 @@ #ifndef _ASM_IC_SC520_H_ #define _ASM_IC_SC520_H_ 1 -/* Memory mapped configuration registers, MMCR */ -#define SC520_REVID 0x0000 /* ElanSC520 Microcontroller Revision ID Register */ -#define SC520_CPUCTL 0x0002 /* Am5x86 CPU Control Register */ -#define SC520_DRCCTL 0x0010 /* SDRAM Control Register */ -#define SC520_DRCTMCTL 0x0012 /* SDRAM Timing Control Register */ -#define SC520_DRCCFG 0x0014 /* SDRAM Bank Configuration Register*/ -#define SC520_DRCBENDADR 0x0018 /* SDRAM Bank 0-3 Ending Address Register*/ -#define SC520_ECCCTL 0x0020 /* ECC Control Register */ -#define SC520_ECCSTA 0x0021 /* ECC Status Register */ -#define SC520_ECCCKBPOS 0x0022 /* ECC Check Bit Position Register */ -#define SC520_ECCSBADD 0x0024 /* ECC Single-Bit Error Address Register */ +#ifndef __ASSEMBLY__ + +void init_sc520(void); +unsigned long init_sc520_dram(void); + +/* Memory mapped configuration registers */ +typedef struct sc520_mmcr { + u16 revid; /* ElanSC520 microcontroller revision id */ + u8 cpuctl; /* am5x86 CPU control */ + + u8 pad_0x003[0x0d]; + + u8 drcctl; /* SDRAM control */ + u8 pad_0x011[0x01]; + u8 drctmctl; /* SDRAM timing control */ + u8 pad_0x013[0x01]; + u16 drccfg; /* SDRAM bank configuration*/ + u8 pad_0x016[0x02]; + u32 drcbendadr; /* SDRAM bank 0-3 ending address*/ + u8 pad_0x01c[0x04]; + u8 eccctl; /* ECC control */ + u8 eccsta; /* ECC status */ + u8 eccckbpos; /* ECC check bit position */ + u8 ecccktest; /* ECC Check Code Test */ + u32 eccsbadd; /* ECC single-bit error address */ + u32 eccmbadd; /* ECC multi-bit error address */ + + u8 pad_0x02c[0x14]; + + u8 dbctl; /* SDRAM buffer control */ + + u8 pad_0x041[0x0f]; + + u16 bootcsctl; /* /BOOTCS control */ + u8 pad_0x052[0x02]; + u16 romcs1ctl; /* /ROMCS1 control */ + u16 romcs2ctl; /* /ROMCS2 control */ + + u8 pad_0x058[0x08]; + + u16 hbctl; /* host bridge control */ + u16 hbtgtirqctl; /* host bridge target interrupt control */ + u16 hbtgtirqsta; /* host bridge target interrupt status */ + u16 hbmstirqctl; /* host bridge target interrupt control */ + u16 hbmstirqsta; /* host bridge master interrupt status */ + u8 pad_0x06a[0x02]; + u32 mstintadd; /* host bridge master interrupt address */ + + u8 sysarbctl; /* system arbiter control */ + u8 pciarbsta; /* PCI bus arbiter status */ + u16 sysarbmenb; /* system arbiter master enable */ + u32 arbprictl; /* arbiter priority control */ + + u8 pad_0x078[0x08]; + + u8 adddecctl; /* address decode control */ + u8 pad_0x081[0x01]; + u16 wpvsta; /* write-protect violation status */ + u8 pad_0x084[0x04]; + u32 par[16]; /* programmable address regions */ + + u8 pad_0x0c8[0x0b38]; + + u8 gpecho; /* GP echo mode */ + u8 gpcsdw; /* GP chip select data width */ + u16 gpcsqual; /* GP chip select qualification */ + u8 pad_0xc04[0x4]; + u8 gpcsrt; /* GP chip select recovery time */ + u8 gpcspw; /* GP chip select pulse width */ + u8 gpcsoff; /* GP chip select offset */ + u8 gprdw; /* GP read pulse width */ + u8 gprdoff; /* GP read offset */ + u8 gpwrw; /* GP write pulse width */ + u8 gpwroff; /* GP write offset */ + u8 gpalew; /* GP ale pulse width */ + u8 gpaleoff; /* GP ale offset */ + + u8 pad_0xc11[0x0f]; + + u16 piopfs15_0; /* PIO15-PIO0 pin function select */ + u16 piopfs31_16; /* PIO31-PIO16 pin function select */ + u8 cspfs; /* chip select pin function select */ + u8 pad_0xc25[0x01]; + u8 clksel; /* clock select */ + u8 pad_0xc27[0x01]; + u16 dsctl; /* drive strength control */ + u16 piodir15_0; /* PIO15-PIO0 direction */ + u16 piodir31_16; /* PIO31-PIO16 direction */ + u8 pad_0xc2e[0x02]; + u16 piodata15_0 ; /* PIO15-PIO0 data */ + u16 piodata31_16; /* PIO31-PIO16 data */ + u16 pioset15_0; /* PIO15-PIO0 set */ + u16 pioset31_16; /* PIO31-PIO16 set */ + u16 pioclr15_0; /* PIO15-PIO0 clear */ + u16 pioclr31_16; /* PIO31-PIO16 clear */ + + u8 pad_0xc3c[0x24]; + + u16 swtmrmilli; /* software timer millisecond count */ + u16 swtmrmicro; /* software timer microsecond count */ + u8 swtmrcfg; /* software timer configuration */ + + u8 pad_0xc65[0x0b]; + + u8 gptmrsta; /* GP timers status register */ + u8 pad_0xc71; + u16 gptmr0ctl; /* GP timer 0 mode/control */ + u16 gptmr0cnt; /* GP timer 0 count */ + u16 gptmr0maxcmpa; /* GP timer 0 maxcount compare A */ + u16 gptmr0maxcmpb; /* GP timer 0 maxcount compare B */ + u16 gptmr1ctl; /* GP timer 1 mode/control */ + u16 gptmr1cnt; /* GP timer 1 count */ + u16 gptmr1maxcmpa; /* GP timer 1 maxcount compare A */ + u16 gptmr1maxcmpb; /* GP timer 1 maxcount compare B*/ + u16 gptmr2ctl; /* GP timer 2 mode/control */ + u16 gptmr2cnt; /* GP timer 2 count */ + u8 pad_0xc86[0x08]; + u16 gptmr2maxcmpa; /* GP timer 2 maxcount compare A */ + + u8 pad_0xc90[0x20]; + + u16 wdtmrctl; /* watchdog timer control */ + u16 wdtmrcntl; /* watchdog timer count low */ + u16 wdtmrcnth; /* watchdog timer count high */ + + u8 pad_0xcb6[0x0a]; + + u8 uart1ctl; /* UART 1 general control */ + u8 uart1sta; /* UART 1 general status */ + u8 uart1fcrshad; /* UART 1 FIFO control shadow */ + u8 pad_0xcc3[0x01]; + u8 uart2ctl; /* UART 2 general control */ + u8 uart2sta; /* UART 2 general status */ + u8 uart2fcrshad; /* UART 2 FIFO control shadow */ + + u8 pad_0xcc7[0x09]; + + u8 ssictl; /* SSI control */ + u8 ssixmit; /* SSI transmit */ + u8 ssicmd; /* SSI command */ + u8 ssista; /* SSI status */ + u8 ssircv; /* SSI receive */ + + u8 pad_0xcd5[0x2b]; + + u8 picicr; /* interrupt control */ + u8 pad_0xd01[0x01]; + u8 pic_mode[3]; /* PIC interrupt mode */ + u8 pad_0xd05[0x03]; + u16 swint16_1; /* software interrupt 16-1 control */ + u8 swint22_17; /* software interrupt 22-17/NMI control */ + u8 pad_0xd0b[0x05]; + u16 intpinpol; /* interrupt pin polarity */ + u8 pad_0xd12[0x02]; + u16 pcihostmap; /* PCI host bridge interrupt mapping */ + u8 pad_0xd16[0x02]; + u16 eccmap; /* ECC interrupt mapping */ + u8 gp_tmr_int_map[3]; /* GP timer interrupt mapping */ + u8 pad_0xd1d[0x03]; + u8 pit_int_map[3]; /* PIT interrupt mapping */ + u8 pad_0xd23[0x05]; + u8 uart_int_map[2]; /* UART interrupt mapping */ + u8 pad_0xd2a[0x06]; + u8 pci_int_map[4]; /* PCI interrupt mapping (A through D)*/ + u8 pad_0xd34[0x0c]; + u8 dmabcintmap; /* DMA buffer chaining interrupt mapping */ + u8 ssimap; /* SSI interrupt mapping register */ + u8 wdtmap; /* watchdog timer interrupt mapping */ + u8 rtcmap; /* RTC interrupt mapping register */ + u8 wpvmap; /* write-protect interrupt mapping */ + u8 icemap; /* AMDebug JTAG Rx/Tx interrupt mapping */ + u8 ferrmap; /* floating point error interrupt mapping */ + u8 pad_0xd47[0x09]; + u8 gp_int_map[11]; /* GP IRQ interrupt mapping */ + + u8 pad_0xd5b[0x15]; + + u8 sysinfo; /* system board information */ + u8 pad_0xd71[0x01]; + u8 rescfg; /* reset configuration */ + u8 pad_0xd73[0x01]; + u8 ressta; /* reset status */ + + u8 pad_0xd75[0x0b]; + + u8 gpdmactl; /* GP-DMA Control */ + u8 gpdmammio; /* GP-DMA memory-mapped I/O */ + u16 gpdmaextchmapa; /* GP-DMA resource channel map a */ + u16 gpdmaextchmapb; /* GP-DMA resource channel map b */ + u8 gp_dma_ext_pg_0; /* GP-DMA channel extended page 0 */ + u8 gp_dma_ext_pg_1; /* GP-DMA channel extended page 0 */ + u8 gp_dma_ext_pg_2; /* GP-DMA channel extended page 0 */ + u8 gp_dma_ext_pg_3; /* GP-DMA channel extended page 0 */ + u8 gp_dma_ext_pg_5; /* GP-DMA channel extended page 0 */ + u8 gp_dma_ext_pg_6; /* GP-DMA channel extended page 0 */ + u8 gp_dma_ext_pg_7; /* GP-DMA channel extended page 0 */ + u8 pad_0xd8d[0x03]; + u8 gpdmaexttc3; /* GP-DMA channel 3 extender transfer count */ + u8 gpdmaexttc5; /* GP-DMA channel 5 extender transfer count */ + u8 gpdmaexttc6; /* GP-DMA channel 6 extender transfer count */ + u8 gpdmaexttc7; /* GP-DMA channel 7 extender transfer count */ + u8 pad_0xd94[0x4]; + u8 gpdmabcctl; /* buffer chaining control */ + u8 gpdmabcsta; /* buffer chaining status */ + u8 gpdmabsintenb; /* buffer chaining interrupt enable */ + u8 gpdmabcval; /* buffer chaining valid */ + u8 pad_0xd9c[0x04]; + u16 gpdmanxtaddl3; /* GP-DMA channel 3 next address low */ + u16 gpdmanxtaddh3; /* GP-DMA channel 3 next address high */ + u16 gpdmanxtaddl5; /* GP-DMA channel 5 next address low */ + u16 gpdmanxtaddh5; /* GP-DMA channel 5 next address high */ + u16 gpdmanxtaddl6; /* GP-DMA channel 6 next address low */ + u16 gpdmanxtaddh6; /* GP-DMA channel 6 next address high */ + u16 gpdmanxtaddl7; /* GP-DMA channel 7 next address low */ + u16 gpdmanxtaddh7; /* GP-DMA channel 7 next address high */ + u16 gpdmanxttcl3; /* GP-DMA channel 3 next transfer count low */ + u16 gpdmanxttch3; /* GP-DMA channel 3 next transfer count high */ + u16 gpdmanxttcl5; /* GP-DMA channel 5 next transfer count low */ + u16 gpdmanxttch5; /* GP-DMA channel 5 next transfer count high */ + u16 gpdmanxttcl6; /* GP-DMA channel 6 next transfer count low */ + u16 gpdmanxttch6; /* GP-DMA channel 6 next transfer count high */ + u16 gpdmanxttcl7; /* GP-DMA channel 7 next transfer count low */ + u16 gpdmanxttch7; /* GP-DMA channel 7 next transfer count high */ + + u8 pad_0xdc0[0x0240]; +} sc520_mmcr_t; + +extern volatile sc520_mmcr_t *sc520_mmcr; + +#endif + +/* MMCR Offsets (required for assembler code */ #define SC520_DBCTL 0x0040 /* SDRAM Buffer Control Register */ -#define SC520_BOOTCSCTL 0x0050 /* /BOOTCS Control Register */ -#define SC520_ROMCS1CTL 0x0054 /* /ROMCS1 Control Register */ -#define SC520_ROMCS2CTL 0x0056 /* /ROMCS2 Control Register */ -#define SC520_HBCTL 0x0060 /* Host Bridge Control Register */ -#define SC520_HBTGTIRQCTL 0x0062 /* Host Bridge Target Interrupt Control Register */ -#define SC520_HBTGTIRQSTA 0x0064 /* Host Bridge Target Interrupt Status Register */ -#define SC520_HBMSTIRQCTL 0x0066 /* Host Bridge Target Interrupt Control Register */ -#define SC520_HBMSTIRQSTA 0x0068 /* Host Bridge Master Interrupt Status Register */ -#define SC520_MSTINTADD 0x006c /* Host Bridge Master Interrupt Address Register */ -#define SC520_SYSARBCTL 0x0070 /* System Arbiter Control Register */ -#define SC520_PCIARBSTA 0x0071 /* PCI Bus Arbiter Status Register */ -#define SC520_SYSARBMENB 0x0072 /* System Arbiter Master Enable Register */ -#define SC520_ARBPRICTL 0x0074 /* Arbiter Priority Control Register */ -#define SC520_ADDDECCTL 0x0080 /* Address Decode Control Register */ -#define SC520_WPVSTA 0x0082 /* Write-Protect Violation Status Register */ -#define SC520_PAR0 0x0088 /* Programmable Address Region 0 Register */ -#define SC520_PAR1 0x008c /* Programmable Address Region 1 Register */ -#define SC520_PAR2 0x0090 /* Programmable Address Region 2 Register */ -#define SC520_PAR3 0x0094 /* Programmable Address Region 3 Register */ -#define SC520_PAR4 0x0098 /* Programmable Address Region 4 Register */ -#define SC520_PAR5 0x009c /* Programmable Address Region 5 Register */ -#define SC520_PAR6 0x00a0 /* Programmable Address Region 6 Register */ -#define SC520_PAR7 0x00a4 /* Programmable Address Region 7 Register */ -#define SC520_PAR8 0x00a8 /* Programmable Address Region 8 Register */ -#define SC520_PAR9 0x00ac /* Programmable Address Region 9 Register */ -#define SC520_PAR10 0x00b0 /* Programmable Address Region 10 Register */ -#define SC520_PAR11 0x00b4 /* Programmable Address Region 11 Register */ -#define SC520_PAR12 0x00b8 /* Programmable Address Region 12 Register */ -#define SC520_PAR13 0x00bc /* Programmable Address Region 13 Register */ #define SC520_PAR14 0x00c0 /* Programmable Address Region 14 Register */ #define SC520_PAR15 0x00c4 /* Programmable Address Region 15 Register */ -#define SC520_GPECHO 0x0c00 /* GP Echo Mode Register */ -#define SC520_GPCSDW 0x0c01 /* GP Chip Select Data Width Register */ -#define SC520_GPCSQUAL 0x0c02 /* GP Chip Select Qualification Register */ -#define SC520_GPCSRT 0x0c08 /* GP Chip Select Recovery Time Register */ -#define SC520_GPCSPW 0x0c09 /* GP Chip Select Pulse Width Register */ -#define SC520_GPCSOFF 0x0c0a /* GP Chip Select Offset Register */ -#define SC520_GPRDW 0x0c0b /* GP Read Pulse Width Register */ -#define SC520_GPRDOFF 0x0c0c /* GP Read Offset Register */ -#define SC520_GPWRW 0x0c0d /* GP Write Pulse Width Register */ -#define SC520_GPWROFF 0x0c0e /* GP Write Offset Register */ -#define SC520_GPALEW 0x0c0f /* GP ALE Pulse Width Register */ -#define SC520_GPALEOFF 0x0c10 /* GP ALE Offset Register */ -#define SC520_PIOPFS15_0 0x0c20 /* PIO15-PIO0 Pin Function Select */ -#define SC520_PIOPFS31_16 0x0c22 /* PIO31-PIO16 Pin Function Select */ -#define SC520_CSPFS 0x0c24 /* Chip Select Pin Function Select */ -#define SC520_CLKSEL 0x0c26 /* Clock Select */ -#define SC520_DSCTL 0x0c28 /* Drive Strength Control */ -#define SC520_PIODIR15_0 0x0c2a /* PIO15-PIO0 Direction */ -#define SC520_PIODIR31_16 0x0c2c /* PIO31-PIO16 Direction */ -#define SC520_PIODATA15_0 0x0c30 /* PIO15-PIO0 Data */ -#define SC520_PIODATA31_16 0x0c32 /* PIO31-PIO16 Data */ -#define SC520_PIOSET15_0 0x0c34 /* PIO15-PIO0 Set */ -#define SC520_PIOSET31_16 0x0c36 /* PIO31-PIO16 Set */ -#define SC520_PIOCLR15_0 0x0c38 /* PIO15-PIO0 Clear */ -#define SC520_PIOCLR31_16 0x0c3a /* PIO31-PIO16 Clear */ -#define SC520_SWTMRMILLI 0x0c60 /* Software Timer Millisecond Count */ -#define SC520_SWTMRMICRO 0x0c62 /* Software Timer Microsecond Count */ -#define SC520_SWTMRCFG 0x0c64 /* Software Timer Configuration */ -#define SC520_GPTMRSTA 0x0c70 /* GP Timers Status Register */ -#define SC520_GPTMR0CTL 0x0c72 /* GP Timer 0 Mode/Control Register */ -#define SC520_GPTMR0CNT 0x0c74 /* GP Timer 0 Count Register */ -#define SC520_GPTMR0MAXCMPA 0x0c76 /* GP Timer 0 Maxcount Compare A Register */ -#define SC520_GPTMR0MAXCMPB 0x0c78 /* GP Timer 0 Maxcount Compare B Register */ -#define SC520_GPTMR1CTL 0x0c7a /* GP Timer 1 Mode/Control Register */ -#define SC520_GPTMR1CNT 0x0c7c /* GP Timer 1 Count Register */ -#define SC520_GPTMR1MAXCMPA 0x0c7e /* GP Timer 1 Maxcount Compare Register A */ -#define SC520_GPTMR1MAXCMPB 0x0c80 /* GP Timer 1 Maxcount Compare B Register */ -#define SC520_GPTMR2CTL 0x0c82 /* GP Timer 2 Mode/Control Register */ -#define SC520_GPTMR2CNT 0x0c84 /* GP Timer 2 Count Register */ -#define SC520_GPTMR2MAXCMPA 0x0c8e /* GP Timer 2 Maxcount Compare A Register */ -#define SC520_WDTMRCTL 0x0cb0 /* Watchdog Timer Control Register */ -#define SC520_WDTMRCNTL 0x0cb2 /* Watchdog Timer Count Low Register */ -#define SC520_WDTMRCNTH 0x0cb4 /* Watchdog Timer Count High Register */ -#define SC520_UART1CTL 0x0cc0 /* UART 1 General Control Register */ -#define SC520_UART1STA 0x0cc1 /* UART 1 General Status Register */ -#define SC520_UART1FCRSHAD 0x0cc2 /* UART 1 FIFO Control Shadow Register */ -#define SC520_UART2CTL 0x0cc4 /* UART 2 General Control Register */ -#define SC520_UART2STA 0x0cc5 /* UART 2 General Status Register */ -#define SC520_UART2FCRSHAD 0x0cc6 /* UART 2 FIFO Control Shadow Register */ -#define SC520_SSICTL 0x0cd0 /* SSI Control */ -#define SC520_SSIXMIT 0x0cd1 /* SSI Transmit */ -#define SC520_SSICMD 0x0cd2 /* SSI Command */ -#define SC520_SSISTA 0x0cd3 /* SSI Status */ -#define SC520_SSIRCV 0x0cd4 /* SSI Receive */ -#define SC520_PICICR 0x0d00 /* Interrupt Control Register */ -#define SC520_MPICMODE 0x0d02 /* Master PIC Interrupt Mode Register */ -#define SC520_SL1PICMODE 0x0d03 /* Slave 1 PIC Interrupt Mode Register */ -#define SC520_SL2PICMODE 0x0d04 /* Slave 2 PIC Interrupt Mode Register */ -#define SC520_SWINT16_1 0x0d08 /* Software Interrupt 16-1 Control Register */ -#define SC520_SWINT22_17 0x0d0a /* Software Interrupt 22-17/NMI Control Register */ -#define SC520_INTPINPOL 0x0d10 /* Interrupt Pin Polarity Register */ -#define SC520_PCIHOSTMAP 0x0d14 /* PCI Host Bridge Interrupt Mappin Register */ -#define SC520_ECCMAP 0x0d18 /* ECC Interrupt Mapping Register */ -#define SC520_GPTMR0MAP 0x0d1a /* GP Timer 0 Interrupt Mapping Register */ -#define SC520_GPTMR1MAP 0x0d1b /* GP Timer 1 Interrupt Mapping Register */ -#define SC520_GPTMR2MAP 0x0d1c /* GP Timer 2 Interrupt Mapping Register */ -#define SC520_PIT0MAP 0x0d20 /* PIT0 Interrupt Mapping Register */ -#define SC520_PIT1MAP 0x0d21 /* PIT1 Interrupt Mapping Register */ -#define SC520_PIT2MAP 0x0d22 /* PIT2 Interrupt Mapping Register */ -#define SC520_UART1MAP 0x0d28 /* UART 1 Interrupt Mapping Register */ -#define SC520_UART2MAP 0x0d29 /* UART 2 Interrupt Mapping Register */ -#define SC520_PCIINTAMAP 0x0d30 /* PCI Interrupt A Mapping Register */ -#define SC520_PCIINTBMAP 0x0d31 /* PCI Interrupt B Mapping Register */ -#define SC520_PCIINTCMAP 0x0d32 /* PCI Interrupt C Mapping Register */ -#define SC520_PCIINTDMAP 0x0d33 /* PCI Interrupt D Mapping Register */ -#define SC520_DMABCINTMAP 0x0d40 /* DMA Buffer Chaining Interrupt Mapping Register */ -#define SC520_SSIMAP 0x0d41 /* SSI Interrupt Mapping Register */ -#define SC520_WDTMAP 0x0d42 /* Watchdog Timer Interrupt Mapping Register */ -#define SC520_RTCMAP 0x0d43 /* RTC Interrupt Mapping Register */ -#define SC520_WPVMAP 0x0d44 /* Write-Protect Interrupt Mapping Register */ -#define SC520_ICEMAP 0x0d45 /* AMDebug JTAG RX/TX Interrupt Mapping Register */ -#define SC520_FERRMAP 0x0d46 /* Floating Point Error Interrupt Mapping Register */ -#define SC520_GP0IMAP 0x0d50 /* GPIRQ0 Interrupt Mapping Register */ -#define SC520_GP1IMAP 0x0d51 /* GPIRQ1 Interrupt Mapping Register */ -#define SC520_GP2IMAP 0x0d52 /* GPIRQ2 Interrupt Mapping Register */ -#define SC520_GP3IMAP 0x0d53 /* GPIRQ3 Interrupt Mapping Register */ -#define SC520_GP4IMAP 0x0d54 /* GPIRQ4 Interrupt Mapping Register */ -#define SC520_GP5IMAP 0x0d55 /* GPIRQ5 Interrupt Mapping Register */ -#define SC520_GP6IMAP 0x0d56 /* GPIRQ6 Interrupt Mapping Register */ -#define SC520_GP7IMAP 0x0d57 /* GPIRQ7 Interrupt Mapping Register */ -#define SC520_GP8IMAP 0x0d58 /* GPIRQ8 Interrupt Mapping Register */ -#define SC520_GP9IMAP 0x0d59 /* GPIRQ9 Interrupt Mapping Register */ -#define SC520_GP10IMAP 0x0d5a /* GPIRQ10 Interrupt Mapping Register */ -#define SC520_SYSINFO 0x0d70 /* System Board Information Register */ -#define SC520_RESCFG 0x0d72 /* Reset Configuration Register */ -#define SC520_RESSTA 0x0d74 /* Reset Status Register */ -#define SC520_GPDMAMMIO 0x0d81 /* GP-DMA Memory-Mapped I/O Register */ -#define SC520_GPDMAEXTCHMAPA 0x0d82 /* GP-DMA Resource Channel Map A */ -#define SC520_GPDMAEXTCHMAPB 0x0d84 /* GP-DMA Resource Channel Map B */ -#define SC520_GPDMAEXTPG0 0x0d86 /* GP-DMA Channel 0 Extended Page */ -#define SC520_GPDMAEXTPG1 0x0d87 /* GP-DMA Channel 1 Extended Page */ -#define SC520_GPDMAEXTPG2 0x0d88 /* GP-DMA Channel 2 Extended Page */ -#define SC520_GPDMAEXTPG3 0x0d89 /* GP-DMA Channel 3 Extended Page */ -#define SC520_GPDMAEXTPG5 0x0d8a /* GP-DMA Channel 5 Extended Page */ -#define SC520_GPDMAEXTPG6 0x0d8b /* GP-DMA Channel 6 Extended Page */ -#define SC520_GPDMAEXTPG7 0x0d8c /* GP-DMA Channel 7 Extended Page */ -#define SC520_GPDMAEXTTC3 0x0d90 /* GP-DMA Channel 3 Extender Transfer count */ -#define SC520_GPDMAEXTTC5 0x0d91 /* GP-DMA Channel 5 Extender Transfer count */ -#define SC520_GPDMAEXTTC6 0x0d92 /* GP-DMA Channel 6 Extender Transfer count */ -#define SC520_GPDMAEXTTC7 0x0d93 /* GP-DMA Channel 7 Extender Transfer count */ -#define SC520_GPDMABCCTL 0x0d98 /* Buffer Chaining Control */ -#define SC520_GPDMABCSTA 0x0d99 /* Buffer Chaining Status */ -#define SC520_GPDMABSINTENB 0x0d9a /* Buffer Chaining Interrupt Enable */ -#define SC520_GPDMABCVAL 0x0d9b /* Buffer Chaining Valid */ -#define SC520_GPDMANXTADDL3 0x0da0 /* GP-DMA Channel 3 Next Address Low */ -#define SC520_GPDMANXTADDH3 0x0da2 /* GP-DMA Channel 3 Next Address High */ -#define SC520_GPDMANXTADDL5 0x0da4 /* GP-DMA Channel 5 Next Address Low */ -#define SC520_GPDMANXTADDH5 0x0da6 /* GP-DMA Channel 5 Next Address High */ -#define SC520_GPDMANXTADDL6 0x0da8 /* GP-DMA Channel 6 Next Address Low */ -#define SC520_GPDMANXTADDH6 0x0daa /* GP-DMA Channel 6 Next Address High */ -#define SC520_GPDMANXTADDL7 0x0dac /* GP-DMA Channel 7 Next Address Low */ -#define SC520_GPDMANXTADDH7 0x0dae /* GP-DMA Channel 7 Next Address High */ -#define SC520_GPDMANXTTCL3 0x0db0 /* GP-DMA Channel 3 Next Transfer Count Low */ -#define SC520_GPDMANXTTCH3 0x0db2 /* GP-DMA Channel 3 Next Transfer Count High */ -#define SC520_GPDMANXTTCL5 0x0db4 /* GP-DMA Channel 5 Next Transfer Count Low */ -#define SC520_GPDMANXTTCH5 0x0db6 /* GP-DMA Channel 5 Next Transfer Count High */ -#define SC520_GPDMANXTTCL6 0x0db8 /* GP-DMA Channel 6 Next Transfer Count Low */ -#define SC520_GPDMANXTTCH6 0x0dba /* GP-DMA Channel 6 Next Transfer Count High */ -#define SC520_GPDMANXTTCL7 0x0dbc /* GP-DMA Channel 7 Next Transfer Count Low */ -#define SC520_GPDMANXTTCH7 0x0dbe /* GP-DMA Channel 7 Next Transfer Count High */ +#define SC520_SWTMRMILLI 0x0c60 /* Software Timer Millisecond Count */ +#define SC520_SWTMRMICRO 0x0c62 /* Software Timer Microsecond Count */ /* MMCR Register bits (not all of them :) ) */ @@ -221,7 +285,6 @@ #define SSISTA_BSY 0x02 /* SSI Busy */ #define SSISTA_TC_INT 0x01 /* SSI Transaction Complete Interrupt */ - /* BITS for SC520_ADDDECCTL: */ #define WPV_INT_ENB 0x80 /* Write-Protect Violation Interrupt Enable */ #define IO_HOLE_DEST_PCI 0x10 /* I/O Hole Access Destination */ @@ -233,7 +296,6 @@ #define SC520_REG_ADDR 0x00000cf8 #define SC520_REG_DATA 0x00000cfc - #define SC520_ISA_MEM_PHYS 0x00000000 #define SC520_ISA_MEM_BUS 0x00000000 #define SC520_ISA_MEM_SIZE 0x01000000 @@ -282,15 +344,4 @@ #define SC520_IRQ14 9 #define SC520_IRQ15 10 -/* utility functions */ -void write_mmcr_byte(u16 mmcr, u8 data); -void write_mmcr_word(u16 mmcr, u16 data); -void write_mmcr_long(u16 mmcr, u32 data); -u8 read_mmcr_byte(u16 mmcr); -u16 read_mmcr_word(u16 mmcr); -u32 read_mmcr_long(u16 mmcr); - -void init_sc520(void); -unsigned long init_sc520_dram(void); - #endif |