aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAshish Kumar <Ashish.Kumar@nxp.com>2017-11-06 13:19:28 +0530
committerYork Sun <york.sun@nxp.com>2017-11-15 10:52:26 -0800
commitd9195c62fa5e4c297f40ef01d4e86da742838c32 (patch)
tree258690dacc4315d4437c767737035240134afe3d
parent91fded6200374d873bfd26190fe9d591ce7bd41d (diff)
downloadu-boot-d9195c62fa5e4c297f40ef01d4e86da742838c32.zip
u-boot-d9195c62fa5e4c297f40ef01d4e86da742838c32.tar.gz
u-boot-d9195c62fa5e4c297f40ef01d4e86da742838c32.tar.bz2
armv8: ls1088ardb: Add distro boot support
Distro boot support gives flexibility to run distro RFS like Ubuntu being deployed from SD card or SATA drive. If it fails to detect external storage, fall back to qspi/sd boot. Enable this by default in RDB's defconfig by selecting CONFIG_DISTRO_DEFAULTS Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Zhang Ying <zhangying@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
-rw-r--r--configs/ls1088ardb_qspi_defconfig1
-rw-r--r--configs/ls1088ardb_sdcard_qspi_defconfig1
-rw-r--r--include/configs/ls1088ardb.h113
3 files changed, 89 insertions, 26 deletions
diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig
index 9cc875a..1f3d581 100644
--- a/configs/ls1088ardb_qspi_defconfig
+++ b/configs/ls1088ardb_qspi_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_TARGET_LS1088ARDB=y
CONFIG_FSL_LS_PPA=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"
+CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig
index 8abc313..8e5cf3b 100644
--- a/configs/ls1088ardb_sdcard_qspi_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_defconfig
@@ -7,6 +7,7 @@ CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"
+CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index eef9a07..e6bf2b8 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -258,40 +258,102 @@
/* Initial environment variables */
#if defined(CONFIG_QSPI_BOOT)
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "loadaddr=0x90100000\0" \
- "kernel_addr=0x100000\0" \
- "ramdisk_addr=0x800000\0" \
- "ramdisk_size=0x2000000\0" \
- "fdt_high=0xa0000000\0" \
- "initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x1000000\0" \
- "kernel_load=0xa0000000\0" \
- "kernel_size=0x2800000\0" \
+#define MC_INIT_CMD \
"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
- "sf read 0x80100000 0xE00000 0x100000;" \
- "fsl_mc start mc 0x80000000 0x80100000\0" \
- "mcmemsize=0x70000000 \0"
+ "sf read 0x80100000 0xE00000 0x100000;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0" \
+ "mcmemsize=0x70000000\0"
#elif defined(CONFIG_SD_BOOT)
+#define MC_INIT_CMD \
+ "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+ "mmc read 0x80100000 0x7000 0x800;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0" \
+ "mcmemsize=0x70000000\0"
+#endif
+
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "BOARD=ls1088ardb\0" \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "loadaddr=0x90100000\0" \
- "kernel_addr=0x800\0" \
"ramdisk_addr=0x800000\0" \
"ramdisk_size=0x2000000\0" \
"fdt_high=0xa0000000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x8000\0" \
- "kernel_load=0xa0000000\0" \
- "kernel_size=0x14000\0" \
- "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
- "mmc read 0x80100000 0x7000 0x800;" \
- "fsl_mc start mc 0x80000000 0x80100000\0" \
- "mcmemsize=0x70000000 \0"
-
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x1000000\0" \
+ "kernel_addr_sd=0x8000\0" \
+ "kernel_start=0x580100000\0" \
+ "kernelheader_start=0x580800000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr=0x800000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "kernelheader_size=0x40000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ "kernel_size_sd=0x14000\0" \
+ MC_INIT_CMD \
+ BOOTENV \
+ "boot_scripts=ls1088ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1088ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "env exists mcinitcmd && run mcinitcmd && " \
+ "mmc read 0x80200000 0x6800 0x800;" \
+ "fsl_mc apply dpl 0x80200000;" \
+ "bootm $load_addr#ls1088ardb\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size &&" \
+ "bootm $load_addr#$BOARD\0" \
+ "sd_bootcmd=echo Trying load from sd card..;" \
+ "mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd ;" \
+ "bootm $load_addr#$BOARD\0"
+
+#undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT)
+/* Try to boot an on-QSPI kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND \
+ "env exists mcinitcmd && run mcinitcmd && " \
+ "sf read 0x80200000 0xd00000 0x100000;" \
+ " fsl_mc apply dpl 0x80200000;" \
+ "run distro_bootcmd;run qspi_bootcmd"
+/* Try to boot an on-SD kernel first, then do normal distro boot */
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND \
+ "env exists mcinitcmd && run mcinitcmd ;" \
+ "&& env exists mcinitcmd && mmcinfo; " \
+ "mmc read 0x88000000 0x6800 0x800; " \
+ "&& fsl_mc apply dpl 0x88000000;" \
+ "run distro_bootcmd;run sd_bootcmd"
#endif
/* MAC/PHY configuration */
@@ -329,7 +391,6 @@
#include <config_distro_defaults.h>
#define BOOT_TARGET_DEVICES(func) \
- func(USB, usb, 0) \
func(MMC, mmc, 0) \
func(SCSI, scsi, 0) \
func(DHCP, dhcp, na)