arm: dts: stm32mp15: alignment with v5.16

Device tree alignment with Linux kernel v5.16-rc5
- ARM: dts: stm32: set otg-rev on stm32mp151
- ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151
- ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
- ARM: dts: stm32: fix SAI sub nodes register range
- ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

3 files changed, 15 insertions, 14 deletions

diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index 5b60ecb..d3553e0 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -1179,7 +1179,7 @@
 		};
 	};
 
-	sai2a_pins_c: sai2a-4 {
+	sai2a_pins_c: sai2a-2 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
 				 <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
@@ -1190,7 +1190,7 @@
 		};
 	};
 
-	sai2a_sleep_pins_c: sai2a-5 {
+	sai2a_sleep_pins_c: sai2a-sleep-2 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
 				 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
@@ -1235,14 +1235,14 @@
 		};
 	};
 
-	sai2b_pins_c: sai2a-4 {
+	sai2b_pins_c: sai2b-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
 			bias-disable;
 		};
 	};
 
-	sai2b_sleep_pins_c: sai2a-sleep-5 {
+	sai2b_sleep_pins_c: sai2b-sleep-2 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
 		};
diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index 8e0a0bc..5a2be00 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -842,7 +842,7 @@
 				#sound-dai-cells = <0>;
 
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x1c>;
+				reg = <0x4 0x20>;
 				clocks = <&rcc SAI1_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 87 0x400 0x01>;
@@ -852,7 +852,7 @@
 			sai1b: audio-controller@4400a024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI1_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 88 0x400 0x01>;
@@ -873,7 +873,7 @@
 			sai2a: audio-controller@4400b004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x1c>;
+				reg = <0x4 0x20>;
 				clocks = <&rcc SAI2_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 89 0x400 0x01>;
@@ -883,7 +883,7 @@
 			sai2b: audio-controller@4400b024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI2_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 90 0x400 0x01>;
@@ -904,7 +904,7 @@
 			sai3a: audio-controller@4400c004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x1c>;
+				reg = <0x04 0x20>;
 				clocks = <&rcc SAI3_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 113 0x400 0x01>;
@@ -914,7 +914,7 @@
 			sai3b: audio-controller@4400c024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI3_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 114 0x400 0x01>;
@@ -1103,6 +1103,7 @@
 			g-np-tx-fifo-size = <32>;
 			g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
 			dr_mode = "otg";
+			otg-rev = <0x200>;
 			usb33d-supply = <&usb33>;
 			status = "disabled";
 		};
@@ -1301,7 +1302,7 @@
 			sai4a: audio-controller@50027004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x1c>;
+				reg = <0x04 0x20>;
 				clocks = <&rcc SAI4_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 99 0x400 0x01>;
@@ -1311,7 +1312,7 @@
 			sai4b: audio-controller@50027024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI4_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 100 0x400 0x01>;
@@ -1482,7 +1483,7 @@
 		usbh_ohci: usb@5800c000 {
 			compatible = "generic-ohci";
 			reg = <0x5800c000 0x1000>;
-			clocks = <&rcc USBH>;
+			clocks = <&rcc USBH>, <&usbphyc>;
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
index 8fc93b0..5502eec 100644
--- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
@@ -257,7 +257,7 @@
 	stusb1600@28 {
 		compatible = "st,stusb1600";
 		reg = <0x28>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpioi>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&stusb1600_pins_a>;