Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq

- i2c dm model support of lx2160a, ls1088a, lx2088a, ls1028a
- icid setup for ls1028a, ls1088a
- other small fixes

70 files changed, 1533 insertions, 196 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1cb89c6..162ac85 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1093,6 +1093,7 @@ config TARGET_LS2080A_SIMU
 	select ARCH_MISC_INIT
 	select ARM64
 	select ARMV8_MULTIENTRY
+	select BOARD_LATE_INIT
 	help
 	  Support for Freescale LS2080A_SIMU platform
 	  The LS2080A Development System (QDS) is a pre silicon
@@ -1306,6 +1307,8 @@ config TARGET_LS1028AQDS
 	select ARM64
 	select ARMV8_MULTIENTRY
 	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
+	select ARCH_MISC_INIT
 	help
 	  Support for Freescale LS1028AQDS platform
 	  The LS1028A Development System (QDS) is a high-performance
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 5c32738..42d31fd 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -40,14 +40,6 @@ config ARCH_LS1028A
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
 	select SYS_I2C_MXC
-	select SYS_I2C_MXC_I2C1
-	select SYS_I2C_MXC_I2C2
-	select SYS_I2C_MXC_I2C3
-	select SYS_I2C_MXC_I2C4
-	select SYS_I2C_MXC_I2C5
-	select SYS_I2C_MXC_I2C6
-	select SYS_I2C_MXC_I2C7
-	select SYS_I2C_MXC_I2C8
 	select SYS_FSL_ERRATUM_A008997
 	select SYS_FSL_ERRATUM_A009007
 	select SYS_FSL_ERRATUM_A008514 if !TFABOOT
@@ -155,10 +147,10 @@ config ARCH_LS1088A
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
 	select SYS_I2C_MXC
-	select SYS_I2C_MXC_I2C1
-	select SYS_I2C_MXC_I2C2
-	select SYS_I2C_MXC_I2C3
-	select SYS_I2C_MXC_I2C4
+	select SYS_I2C_MXC_I2C1 if !TFABOOT
+	select SYS_I2C_MXC_I2C2 if !TFABOOT
+	select SYS_I2C_MXC_I2C3 if !TFABOOT
+	select SYS_I2C_MXC_I2C4 if !TFABOOT
 	imply SCSI
 	imply PANIC_HANG
 
@@ -205,10 +197,10 @@ config ARCH_LS2080A
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
 	select SYS_I2C_MXC
-	select SYS_I2C_MXC_I2C1
-	select SYS_I2C_MXC_I2C2
-	select SYS_I2C_MXC_I2C3
-	select SYS_I2C_MXC_I2C4
+	select SYS_I2C_MXC_I2C1 if !TFABOOT
+	select SYS_I2C_MXC_I2C2 if !TFABOOT
+	select SYS_I2C_MXC_I2C3 if !TFABOOT
+	select SYS_I2C_MXC_I2C4 if !TFABOOT
 	imply DISTRO_DEFAULTS
 	imply PANIC_HANG
 
@@ -235,14 +227,6 @@ config ARCH_LX2160A
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
 	select SYS_I2C_MXC
-	select SYS_I2C_MXC_I2C1
-	select SYS_I2C_MXC_I2C2
-	select SYS_I2C_MXC_I2C3
-	select SYS_I2C_MXC_I2C4
-	select SYS_I2C_MXC_I2C5
-	select SYS_I2C_MXC_I2C6
-	select SYS_I2C_MXC_I2C7
-	select SYS_I2C_MXC_I2C8
 	imply DISTRO_DEFAULTS
 	imply PANIC_HANG
 	imply SCSI
@@ -513,6 +497,10 @@ config SYS_FSL_DUART_CLK_DIV
 config SYS_FSL_I2C_CLK_DIV
 	int "I2C clock divider"
 	default 1 if ARCH_LS1043A
+	default 4 if ARCH_LS1012A
+	default 4 if ARCH_LS1028A
+	default 8 if ARCH_LX2160A
+	default 8 if ARCH_LS1088A
 	default 2
 	help
 	  This is the divider that is used to derive I2C clock from Platform
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index a8d3cf9..efecbc0 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -47,8 +47,10 @@ endif
 
 ifneq ($(CONFIG_ARCH_LS1088A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1088a_serdes.o
+obj-y += icid.o ls1088_ids.o
 endif
 
 ifneq ($(CONFIG_ARCH_LS1028A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1028a_serdes.o
+obj-y += icid.o ls1028_ids.o
 endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/icid.c b/arch/arm/cpu/armv8/fsl-layerscape/icid.c
index b1a950e..82c5a8b 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/icid.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/icid.c
@@ -17,7 +17,10 @@ static void set_icid(struct icid_id_table *tbl, int size)
 	int i;
 
 	for (i = 0; i < size; i++)
-		out_be32((u32 *)(tbl[i].reg_addr), tbl[i].reg);
+		if (tbl[i].le)
+			out_le32((u32 *)(tbl[i].reg_addr), tbl[i].reg);
+		else
+			out_be32((u32 *)(tbl[i].reg_addr), tbl[i].reg);
 }
 
 #ifdef CONFIG_SYS_DPAA_FMAN
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c
new file mode 100644
index 0000000..d9d125e
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+
+struct icid_id_table icid_tbl[] = {
+	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+	SET_SDHC_ICID(1, FSL_SDMMC_STREAM_ID),
+	SET_SDHC_ICID(2, FSL_SDMMC2_STREAM_ID),
+	SET_SATA_ICID(1, "fsl,ls1028a-ahci", FSL_SATA1_STREAM_ID),
+	SET_EDMA_ICID(FSL_EDMA_STREAM_ID),
+	SET_QDMA_ICID("fsl,ls1028a-qdma", FSL_DMA_STREAM_ID),
+	SET_GPU_ICID("fsl,ls1028a-gpu", FSL_GPU_STREAM_ID),
+	SET_DISPLAY_ICID(FSL_DISPLAY_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(0, FSL_SEC_JR1_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(1, FSL_SEC_JR2_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(2, FSL_SEC_JR3_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(3, FSL_SEC_JR4_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c
new file mode 100644
index 0000000..49e2755
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+
+struct icid_id_table icid_tbl[] = {
+	SET_SDHC_ICID(1, FSL_SDMMC_STREAM_ID),
+	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+	SET_SATA_ICID(1, "fsl,ls1088a-ahci", FSL_SATA1_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(0, FSL_SEC_JR1_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(1, FSL_SEC_JR2_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(2, FSL_SEC_JR3_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(3, FSL_SEC_JR4_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index ca80059..3fd34e3 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -340,6 +340,10 @@ void fsl_lsch3_early_init_f(void)
 	if (fsl_check_boot_mode_secure() == 1)
 		bypass_smmu();
 #endif
+
+#if defined(CONFIG_ARCH_LS1088A) || defined(CONFIG_ARCH_LS1028A)
+	set_icids();
+#endif
 }
 
 /* Get VDD in the unit mV from voltage ID */
diff --git a/arch/arm/dts/fsl-ls1028a-qds.dts b/arch/arm/dts/fsl-ls1028a-qds.dts
index 94d0aa0..3fb35f1 100644
--- a/arch/arm/dts/fsl-ls1028a-qds.dts
+++ b/arch/arm/dts/fsl-ls1028a-qds.dts
@@ -37,10 +37,23 @@
 
 &i2c0 {
 	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
 };
 
 &i2c1 {
 	status = "okay";
+
+	rtc@51 {
+		compatible = "pcf2127-rtc";
+		reg = <0x51>;
+	};
 };
 
 &i2c2 {
diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts
index 0525389..d18cf6d 100644
--- a/arch/arm/dts/fsl-ls1028a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1028a-rdb.dts
@@ -37,6 +37,26 @@
 
 &i2c0 {
 	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	 i2c-mux@77 {
+
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "pcf2127-rtc";
+				reg = <0x51>;
+			};
+		};
+	};
 };
 
 &i2c1 {
diff --git a/arch/arm/dts/fsl-ls1088a-qds.dts b/arch/arm/dts/fsl-ls1088a-qds.dts
index 8fbb52f..f07d0c6 100644
--- a/arch/arm/dts/fsl-ls1088a-qds.dts
+++ b/arch/arm/dts/fsl-ls1088a-qds.dts
@@ -18,6 +18,29 @@
 	};
 };
 
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "pcf2127-rtc";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
diff --git a/arch/arm/dts/fsl-ls1088a-rdb.dts b/arch/arm/dts/fsl-ls1088a-rdb.dts
index 765d1e3..0fe3519 100644
--- a/arch/arm/dts/fsl-ls1088a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1088a-rdb.dts
@@ -17,6 +17,29 @@
 	};
 };
 
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "pcf2127-rtc";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
 &qspi {
 	bus-num = <0>;
 	status = "okay";
diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index 7c70585..4be1ab8 100644
--- a/arch/arm/dts/fsl-ls1088a.dtsi
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -34,6 +34,38 @@
 			     <1 10 0x8>; /* Hypervisor PPI, active-low */
 	};
 
+	i2c0: i2c@2000000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2000000 0x0 0x10000>;
+		interrupts = <0 34 4>;
+	};
+
+	i2c1: i2c@2010000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2010000 0x0 0x10000>;
+		interrupts = <0 34 4>;
+	};
+
+	i2c2: i2c@2020000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2020000 0x0 0x10000>;
+		interrupts = <0 35 4>;
+	};
+
+	i2c3: i2c@2030000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2030000 0x0 0x10000>;
+		interrupts = <0 35 4>;
+	};
+
 	serial0: serial@21c0500 {
 		device_type = "serial";
 		compatible = "fsl,ns16550", "ns16550a";
diff --git a/arch/arm/dts/fsl-ls2080a-qds.dts b/arch/arm/dts/fsl-ls2080a-qds.dts
index 2a0a528..13461b5 100644
--- a/arch/arm/dts/fsl-ls2080a-qds.dts
+++ b/arch/arm/dts/fsl-ls2080a-qds.dts
@@ -19,6 +19,25 @@
 	};
 };
 
+&i2c0 {
+	status = "okay";
+	pca9547@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x00>;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+	};
+};
+
 &dspi {
 	bus-num = <0>;
 	status = "okay";
diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi
index 5c0769b..99ed33a 100644
--- a/arch/arm/dts/fsl-ls2080a.dtsi
+++ b/arch/arm/dts/fsl-ls2080a.dtsi
@@ -56,6 +56,42 @@
 		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
 	};
 
+	i2c0: i2c@2000000 {
+		status = "disabled";
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2000000 0x0 0x10000>;
+		interrupts = <0 34 0x4>; /* Level high type */
+	};
+
+	i2c1: i2c@2010000 {
+		status = "disabled";
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2010000 0x0 0x10000>;
+		interrupts = <0 34 0x4>; /* Level high type */
+	};
+
+	i2c2: i2c@2020000 {
+		status = "disabled";
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2020000 0x0 0x10000>;
+		interrupts = <0 35 0x4>; /* Level high type */
+	};
+
+	i2c3: i2c@2030000 {
+		status = "disabled";
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2030000 0x0 0x10000>;
+		interrupts = <0 35 0x4>; /* Level high type */
+	};
+
 	dspi: dspi@2100000 {
 		compatible = "fsl,vf610-dspi";
 		#address-cells = <1>;
diff --git a/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts b/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts
index bf97d13..72b2177 100644
--- a/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts
+++ b/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts
@@ -57,6 +57,28 @@
 	};
 };
 
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	pca9547@75 {
+		compatible = "nxp,pca9547";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		 i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x01>;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+	};
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm/dts/fsl-lx2160a-qds.dts b/arch/arm/dts/fsl-lx2160a-qds.dts
index 99836c4..34df0f5 100644
--- a/arch/arm/dts/fsl-lx2160a-qds.dts
+++ b/arch/arm/dts/fsl-lx2160a-qds.dts
@@ -23,6 +23,29 @@
 	status = "okay";
 };
 
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "pcf2127-rtc";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
 &sata0 {
 	status = "okay";
 };
diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts
index 4b52644..7b6608b 100644
--- a/arch/arm/dts/fsl-lx2160a-rdb.dts
+++ b/arch/arm/dts/fsl-lx2160a-rdb.dts
@@ -27,6 +27,20 @@
 	status = "okay";
 };
 
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "pcf2127-rtc";
+		reg = <0x51>;
+	};
+};
+
 &sata0 {
 	status = "okay";
 };
diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi
index 2822078..a189333 100644
--- a/arch/arm/dts/fsl-lx2160a.dtsi
+++ b/arch/arm/dts/fsl-lx2160a.dtsi
@@ -49,6 +49,80 @@
 			     <1 10 0x8>; /* Hypervisor PPI, active-low */
 	};
 
+	i2c0: i2c@2000000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2000000 0x0 0x10000>;
+		interrupts = <0 34 4>;
+		scl-gpio = <&gpio2 15 0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@2010000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2010000 0x0 0x10000>;
+		interrupts = <0 34 4>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@2020000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2020000 0x0 0x10000>;
+		interrupts = <0 35 4>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@2030000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2030000 0x0 0x10000>;
+		interrupts = <0 35 4>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@2040000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2040000 0x0 0x10000>;
+		interrupts = <0 74 4>;
+		scl-gpio = <&gpio2 16 0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@2050000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2050000 0x0 0x10000>;
+		interrupts = <0 74 4>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@2060000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2060000 0x0 0x10000>;
+		interrupts = <0 75 4>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@2070000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2070000 0x0 0x10000>;
+		interrupts = <0 75 4>;
+		status = "disabled";
+	};
+
 	uart0: serial@21c0000 {
 		compatible = "arm,pl011";
 		reg = <0x0 0x21c0000 0x0 0x1000>;
@@ -102,6 +176,17 @@
 		num-cs = <6>;
 	};
 
+	gpio2: gpio@2320000 {
+		compatible = "fsl,qoriq-gpio";
+		reg = <0x0 0x2320000 0x0 0x10000>;
+		interrupts = <0 37 4>;
+		gpio-controller;
+		little-endian;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 	usb0: usb3@3100000 {
 		compatible = "fsl,layerscape-dwc3";
 		reg = <0x0 0x3100000 0x0 0x10000>;
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index eb21c09..a83c70e 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -178,8 +178,10 @@
 #elif defined(CONFIG_ARCH_LX2160A)
 #define TZPC_BASE				0x02200000
 #define TZPCDECPROT_0_SET_BASE			(TZPC_BASE + 0x804)
+#if !defined(CONFIG_DM_I2C)
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_EARLY_INIT
+#endif
 #define SRDS_MAX_LANES  8
 #ifndef L1_CACHE_BYTES
 #define L1_CACHE_SHIFT		6
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
index f971af8..37e2fe4 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
@@ -17,6 +17,7 @@ struct icid_id_table {
 	u32 reg;
 	phys_addr_t compat_addr;
 	phys_addr_t reg_addr;
+	bool le;
 };
 
 struct fman_icid_id_table {
@@ -30,18 +31,35 @@ int fdt_set_iommu_prop(void *blob, int off, int smmu_ph, u32 *ids, int num_ids);
 void set_icids(void);
 void fdt_fixup_icid(void *blob);
 
-#define SET_ICID_ENTRY(name, idA, regA, addr, compataddr) \
+#define SET_ICID_ENTRY(name, idA, regA, addr, compataddr, _le) \
 	{ .compat = name, \
 	  .id = idA, \
 	  .reg = regA, \
 	  .compat_addr = compataddr, \
 	  .reg_addr = addr, \
+	  .le = _le \
 	}
 
+#ifdef CONFIG_SYS_FSL_SEC_LE
+#define SEC_IS_LE true
+#elif defined(CONFIG_SYS_FSL_SEC_BE)
+#define SEC_IS_LE false
+#endif
+
+#ifdef CONFIG_FSL_LSCH2
+
+#ifdef CONFIG_SYS_FSL_CCSR_SCFG_LE
+#define SCFG_IS_LE true
+#elif defined(CONFIG_SYS_FSL_CCSR_SCFG_BE)
+#define SCFG_IS_LE false
+#endif
+
+#define QDMA_IS_LE false
+
 #define SET_SCFG_ICID(compat, streamid, name, compataddr) \
 	SET_ICID_ENTRY(compat, streamid, (((streamid) << 24) | (1 << 23)), \
 		offsetof(struct ccsr_scfg, name) + CONFIG_SYS_FSL_SCFG_ADDR, \
-		compataddr)
+		compataddr, SCFG_IS_LE)
 
 #define SET_USB_ICID(usb_num, compat, streamid) \
 	SET_SCFG_ICID(compat, streamid, usb##usb_num##_icid,\
@@ -55,14 +73,6 @@ void fdt_fixup_icid(void *blob);
 	SET_SCFG_ICID("fsl,esdhc", streamid, sdhc_icid,\
 		CONFIG_SYS_FSL_ESDHC_ADDR)
 
-#define SET_QDMA_ICID(compat, streamid) \
-	SET_ICID_ENTRY(compat, streamid, (1 << 31) | (streamid), \
-		QDMA_BASE_ADDR + QMAN_CQSIDR_REG, \
-		QDMA_BASE_ADDR), \
-	SET_ICID_ENTRY(NULL, streamid, (1 << 31) | (streamid), \
-		QDMA_BASE_ADDR + QMAN_CQSIDR_REG + 4, \
-		QDMA_BASE_ADDR)
-
 #define SET_EDMA_ICID(streamid) \
 	SET_SCFG_ICID("fsl,vf610-edma", streamid, edma_icid,\
 		EDMA_BASE_ADDR)
@@ -81,22 +91,78 @@ void fdt_fixup_icid(void *blob);
 	SET_ICID_ENTRY("fsl,qman", streamid, streamid, \
 		offsetof(struct ccsr_qman, liodnr) + \
 		CONFIG_SYS_FSL_QMAN_ADDR, \
-		CONFIG_SYS_FSL_QMAN_ADDR)
+		CONFIG_SYS_FSL_QMAN_ADDR, false)
 
 #define SET_BMAN_ICID(streamid) \
 	SET_ICID_ENTRY("fsl,bman", streamid, streamid, \
 		offsetof(struct ccsr_bman, liodnr) + \
 		CONFIG_SYS_FSL_BMAN_ADDR, \
-		CONFIG_SYS_FSL_BMAN_ADDR)
+		CONFIG_SYS_FSL_BMAN_ADDR, false)
 
 #define SET_FMAN_ICID_ENTRY(_port_id, streamid) \
 	{ .port_id = (_port_id), .icid = (streamid) }
 
+#define SEC_ICID_REG_VAL(streamid) (((streamid) << 16) | (streamid))
+
 #define SET_SEC_QI_ICID(streamid) \
 	SET_ICID_ENTRY("fsl,sec-v4.0", streamid, \
 		0, offsetof(ccsr_sec_t, qilcr_ls) + \
 		CONFIG_SYS_FSL_SEC_ADDR, \
-		CONFIG_SYS_FSL_SEC_ADDR)
+		CONFIG_SYS_FSL_SEC_ADDR, SEC_IS_LE)
+
+extern struct fman_icid_id_table fman_icid_tbl[];
+extern int fman_icid_tbl_sz;
+
+#else /* CONFIG_FSL_LSCH2 */
+
+#ifdef CONFIG_SYS_FSL_CCSR_GUR_LE
+#define GUR_IS_LE true
+#elif defined(CONFIG_SYS_FSL_CCSR_GUR_BE)
+#define GUR_IS_LE false
+#endif
+
+#define QDMA_IS_LE true
+
+#define SET_GUR_ICID(compat, streamid, name, compataddr) \
+	SET_ICID_ENTRY(compat, streamid, streamid, \
+		offsetof(struct ccsr_gur, name) + CONFIG_SYS_FSL_GUTS_ADDR, \
+		compataddr, GUR_IS_LE)
+
+#define SET_USB_ICID(usb_num, compat, streamid) \
+	SET_GUR_ICID(compat, streamid, usb##usb_num##_amqr,\
+		CONFIG_SYS_XHCI_USB##usb_num##_ADDR)
+
+#define SET_SATA_ICID(sata_num, compat, streamid) \
+	SET_GUR_ICID(compat, streamid, sata##sata_num##_amqr, \
+		AHCI_BASE_ADDR##sata_num)
+
+#define SET_SDHC_ICID(sdhc_num, streamid) \
+	SET_GUR_ICID("fsl,esdhc", streamid, sdmm##sdhc_num##_amqr,\
+		FSL_ESDHC##sdhc_num##_BASE_ADDR)
+
+#define SET_EDMA_ICID(streamid) \
+	SET_GUR_ICID("fsl,vf610-edma", streamid, spare3_amqr,\
+		EDMA_BASE_ADDR)
+
+#define SET_GPU_ICID(compat, streamid) \
+	SET_GUR_ICID(compat, streamid, misc1_amqr,\
+		GPU_BASE_ADDR)
+
+#define SET_DISPLAY_ICID(streamid) \
+	SET_GUR_ICID("arm,mali-dp500", streamid, spare2_amqr,\
+		DISPLAY_BASE_ADDR)
+
+#define SEC_ICID_REG_VAL(streamid) (streamid)
+
+#endif /* CONFIG_FSL_LSCH2 */
+
+#define SET_QDMA_ICID(compat, streamid) \
+	SET_ICID_ENTRY(compat, streamid, (1 << 31) | (streamid), \
+		QDMA_BASE_ADDR + QMAN_CQSIDR_REG, \
+		QDMA_BASE_ADDR, QDMA_IS_LE), \
+	SET_ICID_ENTRY(NULL, streamid, (1 << 31) | (streamid), \
+		QDMA_BASE_ADDR + QMAN_CQSIDR_REG + 4, \
+		QDMA_BASE_ADDR, QDMA_IS_LE)
 
 #define SET_SEC_JR_ICID_ENTRY(jr_num, streamid) \
 	SET_ICID_ENTRY( \
@@ -106,24 +172,22 @@ void fdt_fixup_icid(void *blob);
 			? NULL \
 			: "fsl,sec-v4.0-job-ring"), \
 		streamid, \
-		(((streamid) << 16) | (streamid)), \
+		SEC_ICID_REG_VAL(streamid), \
 		offsetof(ccsr_sec_t, jrliodnr[jr_num].ls) + \
 		CONFIG_SYS_FSL_SEC_ADDR, \
-		FSL_SEC_JR##jr_num##_BASE_ADDR)
+		FSL_SEC_JR##jr_num##_BASE_ADDR, SEC_IS_LE)
 
 #define SET_SEC_DECO_ICID_ENTRY(deco_num, streamid) \
-	SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \
+	SET_ICID_ENTRY(NULL, streamid, SEC_ICID_REG_VAL(streamid), \
 		offsetof(ccsr_sec_t, decoliodnr[deco_num].ls) + \
-		CONFIG_SYS_FSL_SEC_ADDR, 0)
+		CONFIG_SYS_FSL_SEC_ADDR, 0, SEC_IS_LE)
 
 #define SET_SEC_RTIC_ICID_ENTRY(rtic_num, streamid) \
-	SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \
+	SET_ICID_ENTRY(NULL, streamid, SEC_ICID_REG_VAL(streamid), \
 		offsetof(ccsr_sec_t, rticliodnr[rtic_num].ls) + \
-		CONFIG_SYS_FSL_SEC_ADDR, 0)
+		CONFIG_SYS_FSL_SEC_ADDR, 0, SEC_IS_LE)
 
 extern struct icid_id_table icid_tbl[];
-extern struct fman_icid_id_table fman_icid_tbl[];
 extern int icid_tbl_sz;
-extern int fman_icid_tbl_sz;
 
 #endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index ee9b33b..8a5446d 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -25,6 +25,8 @@
 #define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR	(CONFIG_SYS_IMMR + 0x00370000)
 #define SYS_FSL_QSPI_ADDR			(CONFIG_SYS_IMMR + 0x010c0000)
 #define CONFIG_SYS_FSL_ESDHC_ADDR		(CONFIG_SYS_IMMR + 0x01140000)
+#define FSL_ESDHC1_BASE_ADDR			CONFIG_SYS_FSL_ESDHC_ADDR
+#define FSL_ESDHC2_BASE_ADDR			(CONFIG_SYS_IMMR + 0x01150000)
 #ifndef CONFIG_NXP_LSCH3_2
 #define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x01240000)
 #endif
@@ -79,20 +81,41 @@
 #define TZASC_REGION_ATTRIBUTES_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x110)
 #define TZASC_REGION_ID_ACCESS_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x114)
 
+/* EDMA */
+#define EDMA_BASE_ADDR				(CONFIG_SYS_IMMR + 0x012c0000)
+
 /* SATA */
 #define AHCI_BASE_ADDR1				(CONFIG_SYS_IMMR + 0x02200000)
 #define AHCI_BASE_ADDR2				(CONFIG_SYS_IMMR + 0x02210000)
 
+/* QDMA */
+#define QDMA_BASE_ADDR				(CONFIG_SYS_IMMR + 0x07380000)
+#define QMAN_CQSIDR_REG				0x20a80
+
+/* DISPLAY */
+#define DISPLAY_BASE_ADDR			(CONFIG_SYS_IMMR + 0x0e080000)
+
+/* GPU */
+#define GPU_BASE_ADDR				(CONFIG_SYS_IMMR + 0x0e0c0000)
+
 /* SFP */
 #define CONFIG_SYS_SFP_ADDR		(CONFIG_SYS_IMMR + 0x00e80200)
 
 /* SEC */
 #define CONFIG_SYS_FSL_SEC_OFFSET		0x07000000ull
 #define CONFIG_SYS_FSL_JR0_OFFSET		0x07010000ull
+#define FSL_SEC_JR0_OFFSET			CONFIG_SYS_FSL_JR0_OFFSET
+#define FSL_SEC_JR1_OFFSET			0x07020000ull
+#define FSL_SEC_JR2_OFFSET			0x07030000ull
+#define FSL_SEC_JR3_OFFSET			0x07040000ull
 #define CONFIG_SYS_FSL_SEC_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET)
 #define CONFIG_SYS_FSL_JR0_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_JR0_OFFSET)
+#define FSL_SEC_JR0_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR0_OFFSET)
+#define FSL_SEC_JR1_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR1_OFFSET)
+#define FSL_SEC_JR2_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR2_OFFSET)
+#define FSL_SEC_JR3_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR3_OFFSET)
 
 #ifdef CONFIG_TFABOOT
 #ifdef CONFIG_NXP_LSCH3_2
@@ -417,7 +440,8 @@ struct ccsr_gur {
 	u32	usb2_amqr;
 	u8	res_528[0x530-0x528];	/* add more registers when needed */
 	u32	sdmm1_amqr;
-	u8	res_534[0x550-0x534];	/* add more registers when needed */
+	u32	sdmm2_amqr;
+	u8	res_538[0x550 - 0x538];	/* add more registers when needed */
 	u32	sata1_amqr;
 	u32	sata2_amqr;
 	u8	res_558[0x570-0x558];	/* add more registers when needed */
@@ -425,7 +449,8 @@ struct ccsr_gur {
 	u8	res_574[0x590-0x574];	/* add more registers when needed */
 	u32	spare1_amqr;
 	u32	spare2_amqr;
-	u8	res_598[0x620-0x598];	/* add more registers when needed */
+	u32	spare3_amqr;
+	u8	res_59c[0x620 - 0x59c];	/* add more registers when needed */
 	u32	gencr[7];	/* General Control Registers */
 	u8	res_63c[0x640-0x63c];	/* add more registers when needed */
 	u32	cgensr1;	/* Core General Status Register */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
index c53cc57..93bdcc4 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
@@ -76,7 +76,7 @@
 
 #if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A)
 #define FSL_DMA_STREAM_ID		6
-#elif defined(CONFIG_ARCH_LS1088A)
+#elif defined(CONFIG_ARCH_LS1088A) || defined(CONFIG_ARCH_LS1028A)
 #define FSL_DMA_STREAM_ID		5
 #endif
 
@@ -98,4 +98,15 @@
 #define FSL_DPAA2_STREAM_ID_START	23
 #define FSL_DPAA2_STREAM_ID_END		63
 
+#define FSL_SEC_STREAM_ID		64
+#define FSL_SEC_JR1_STREAM_ID		65
+#define FSL_SEC_JR2_STREAM_ID		66
+#define FSL_SEC_JR3_STREAM_ID		67
+#define FSL_SEC_JR4_STREAM_ID		68
+
+#define FSL_SDMMC2_STREAM_ID		69
+#define FSL_EDMA_STREAM_ID		70
+#define FSL_GPU_STREAM_ID		71
+#define FSL_DISPLAY_STREAM_ID		72
+
 #endif
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 370031f..b946105 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -1,6 +1,8 @@
 #if !defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARCH_STI) && \
 	!defined(CONFIG_ARCH_K3) && !defined(CONFIG_ARCH_BCM6858) && \
-	!defined(CONFIG_ARCH_BCM63158) && !defined(CONFIG_ARCH_ROCKCHIP)
+	!defined(CONFIG_ARCH_BCM63158) && !defined(CONFIG_ARCH_ROCKCHIP) && \
+	!defined(CONFIG_ARCH_LX2160A) && !defined(CONFIG_ARCH_LS1028A) && \
+	!defined(CONFIG_ARCH_LS2080A) && !defined(CONFIG_ARCH_LS1088A)
 #include <asm/arch/gpio.h>
 #endif
 #include <asm-generic/gpio.h>
diff --git a/board/freescale/common/emc2305.c b/board/freescale/common/emc2305.c
index 8523084..b1ca051 100644
--- a/board/freescale/common/emc2305.c
+++ b/board/freescale/common/emc2305.c
@@ -24,10 +24,22 @@ void set_fan_speed(u8 data)
 			       I2C_EMC2305_FAN5};
 
 	for (index = 0; index < NUM_OF_FANS; index++) {
+#ifndef CONFIG_DM_I2C
 		if (i2c_write(I2C_EMC2305_ADDR, Fan[index], 1, &data, 1) != 0) {
 			printf("Error: failed to change fan speed @%x\n",
 			       Fan[index]);
 		}
+#else
+		struct udevice *dev;
+
+		if (i2c_get_chip_for_busnum(0, I2C_EMC2305_ADDR, 1, &dev))
+			continue;
+
+		if (dm_i2c_write(dev, Fan[index], &data, 1) != 0) {
+			printf("Error: failed to change fan speed @%x\n",
+			       Fan[index]);
+		}
+#endif
 	}
 }
 
@@ -36,6 +48,15 @@ void emc2305_init(void)
 	u8 data;
 
 	data = I2C_EMC2305_CMD;
+#ifndef CONFIG_DM_I2C
 	if (i2c_write(I2C_EMC2305_ADDR, I2C_EMC2305_CONF, 1, &data, 1) != 0)
 		printf("Error: failed to configure EMC2305\n");
+#else
+	struct udevice *dev;
+
+	if (!i2c_get_chip_for_busnum(0, I2C_EMC2305_ADDR, 1, &dev))
+		if (dm_i2c_write(dev, I2C_EMC2305_CONF, &data, 1))
+			printf("Error: failed to configure EMC2305\n");
+#endif
+
 }
diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c
index f1b98bc..716c93b 100644
--- a/board/freescale/common/qixis.c
+++ b/board/freescale/common/qixis.c
@@ -21,16 +21,40 @@
 #define QIXIS_LBMAP_BRDCFG_REG 0x00
 #endif
 
+#ifndef QIXIS_RCFG_CTL_RECONFIG_IDLE
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
+#endif
+#ifndef QIXIS_RCFG_CTL_RECONFIG_START
+#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
+#endif
+
 #ifdef CONFIG_SYS_I2C_FPGA_ADDR
 u8 qixis_read_i2c(unsigned int reg)
 {
+#ifndef CONFIG_DM_I2C
 	return i2c_reg_read(CONFIG_SYS_I2C_FPGA_ADDR, reg);
+#else
+	struct udevice *dev;
+
+	if (i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_FPGA_ADDR, 1, &dev))
+		return 0xff;
+
+	return dm_i2c_reg_read(dev, reg);
+#endif
 }
 
 void qixis_write_i2c(unsigned int reg, u8 value)
 {
 	u8 val = value;
+#ifndef CONFIG_DM_I2C
 	i2c_reg_write(CONFIG_SYS_I2C_FPGA_ADDR, reg, val);
+#else
+	struct udevice *dev;
+
+	if (!i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_FPGA_ADDR, 1, &dev))
+		dm_i2c_reg_write(dev, reg, val);
+#endif
+
 }
 #endif
 
@@ -142,11 +166,13 @@ static void qixis_reset(void)
 	QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET);
 }
 
+#ifdef QIXIS_LBMAP_ALTBANK
 static void qixis_bank_reset(void)
 {
 	QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_IDLE);
 	QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START);
 }
+#endif
 
 static void __maybe_unused set_lbmap(int lbmap)
 {
@@ -159,12 +185,16 @@ static void __maybe_unused set_lbmap(int lbmap)
 
 static void __maybe_unused set_rcw_src(int rcw_src)
 {
+#ifdef CONFIG_NXP_LSCH3_2
+	QIXIS_WRITE(dutcfg[0], (rcw_src & 0xff));
+#else
 	u8 reg;
 
 	reg = QIXIS_READ(dutcfg[1]);
 	reg = (reg & ~1) | (rcw_src & 1);
 	QIXIS_WRITE(dutcfg[1], reg);
 	QIXIS_WRITE(dutcfg[0], (rcw_src >> 1) & 0xff);
+#endif
 }
 
 static void qixis_dump_regs(void)
@@ -210,16 +240,20 @@ static int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const ar
 		set_lbmap(QIXIS_LBMAP_DFLTBANK);
 		qixis_reset();
 	} else if (strcmp(argv[1], "altbank") == 0) {
+#ifdef QIXIS_LBMAP_ALTBANK
 		set_lbmap(QIXIS_LBMAP_ALTBANK);
 		qixis_bank_reset();
+#else
+		printf("No Altbank!\n");
+#endif
 	} else if (strcmp(argv[1], "nand") == 0) {
 #ifdef QIXIS_LBMAP_NAND
 		QIXIS_WRITE(rst_ctl, 0x30);
 		QIXIS_WRITE(rcfg_ctl, 0);
 		set_lbmap(QIXIS_LBMAP_NAND);
 		set_rcw_src(QIXIS_RCW_SRC_NAND);
-		QIXIS_WRITE(rcfg_ctl, 0x20);
-		QIXIS_WRITE(rcfg_ctl, 0x21);
+		QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_IDLE);
+		QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START);
 #else
 		printf("Not implemented\n");
 #endif
@@ -233,8 +267,8 @@ static int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const ar
 		set_lbmap(QIXIS_LBMAP_SD);
 		set_rcw_src(QIXIS_RCW_SRC_SD);
 #endif
-		QIXIS_WRITE(rcfg_ctl, 0x20);
-		QIXIS_WRITE(rcfg_ctl, 0x21);
+		QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_IDLE);
+		QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START);
 #else
 		printf("Not implemented\n");
 #endif
@@ -244,8 +278,8 @@ static int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const ar
 		QIXIS_WRITE(rcfg_ctl, 0);
 		set_lbmap(QIXIS_LBMAP_IFC);
 		set_rcw_src(QIXIS_RCW_SRC_IFC);
-		QIXIS_WRITE(rcfg_ctl, 0x20);
-		QIXIS_WRITE(rcfg_ctl, 0x21);
+		QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_IDLE);
+		QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START);
 #else
 		printf("Not implemented\n");
 #endif
@@ -255,8 +289,8 @@ static int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const ar
 		QIXIS_WRITE(rcfg_ctl, 0);
 		set_lbmap(QIXIS_LBMAP_EMMC);
 		set_rcw_src(QIXIS_RCW_SRC_EMMC);
-		QIXIS_WRITE(rcfg_ctl, 0x20);
-		QIXIS_WRITE(rcfg_ctl, 0x21);
+		QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_IDLE);
+		QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START);
 #else
 		printf("Not implemented\n");
 #endif
@@ -266,8 +300,10 @@ static int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const ar
 		QIXIS_WRITE(rcfg_ctl, 0);
 		set_lbmap(QIXIS_LBMAP_SD_QSPI);
 		set_rcw_src(QIXIS_RCW_SRC_SD);
-		qixis_write_i2c(offsetof(struct qixis, rcfg_ctl), 0x20);
-		qixis_write_i2c(offsetof(struct qixis, rcfg_ctl), 0x21);
+		qixis_write_i2c(offsetof(struct qixis, rcfg_ctl),
+				QIXIS_RCFG_CTL_RECONFIG_IDLE);
+		qixis_write_i2c(offsetof(struct qixis, rcfg_ctl),
+				QIXIS_RCFG_CTL_RECONFIG_START);
 #else
 		printf("Not implemented\n");
 #endif
@@ -277,8 +313,10 @@ static int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const ar
 		QIXIS_WRITE(rcfg_ctl, 0);
 		set_lbmap(QIXIS_LBMAP_QSPI);
 		set_rcw_src(QIXIS_RCW_SRC_QSPI);
-		qixis_write_i2c(offsetof(struct qixis, rcfg_ctl), 0x20);
-		qixis_write_i2c(offsetof(struct qixis, rcfg_ctl), 0x21);
+		qixis_write_i2c(offsetof(struct qixis, rcfg_ctl),
+				QIXIS_RCFG_CTL_RECONFIG_IDLE);
+		qixis_write_i2c(offsetof(struct qixis, rcfg_ctl),
+				QIXIS_RCFG_CTL_RECONFIG_START);
 #else
 		printf("Not implemented\n");
 #endif
diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c
index 510d7c2..bb655ca 100644
--- a/board/freescale/common/sys_eeprom.c
+++ b/board/freescale/common/sys_eeprom.c
@@ -149,23 +149,42 @@ static int read_eeprom(void)
 {
 	int ret;
 #ifdef CONFIG_SYS_EEPROM_BUS_NUM
+#ifndef CONFIG_DM_I2C
 	unsigned int bus;
 #endif
+#endif
 
 	if (has_been_read)
 		return 0;
 
 #ifdef CONFIG_SYS_EEPROM_BUS_NUM
+#ifndef CONFIG_DM_I2C
 	bus = i2c_get_bus_num();
 	i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
 #endif
+#endif
 
-	ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
-		(void *)&e, sizeof(e));
+#ifndef CONFIG_DM_I2C
+	ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
+		       CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
+		       (void *)&e, sizeof(e));
+#else
+	struct udevice *dev;
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
+	ret = i2c_get_chip_for_busnum(CONFIG_SYS_EEPROM_BUS_NUM,
+				      CONFIG_SYS_I2C_EEPROM_ADDR, 1, &dev);
+#else
+	ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_EEPROM_ADDR, 1, &dev);
+#endif
+	if (!ret)
+		ret = dm_i2c_read(dev, 0, (void *)&e, sizeof(e));
+#endif
 
 #ifdef CONFIG_SYS_EEPROM_BUS_NUM
+#ifndef CONFIG_DM_I2C
 	i2c_set_bus_num(bus);
 #endif
+#endif
 
 #ifdef DEBUG
 	show_eeprom();
@@ -199,8 +218,10 @@ static int prog_eeprom(void)
 	int i;
 	void *p;
 #ifdef CONFIG_SYS_EEPROM_BUS_NUM
+#ifndef CONFIG_DM_I2C
 	unsigned int bus;
 #endif
+#endif
 
 	/* Set the reserved values to 0xFF   */
 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
@@ -211,10 +232,12 @@ static int prog_eeprom(void)
 #endif
 	update_crc();
 
+#ifndef CONFIG_DM_I2C
 #ifdef CONFIG_SYS_EEPROM_BUS_NUM
 	bus = i2c_get_bus_num();
 	i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
 #endif
+#endif
 
 	/*
 	 * The AT24C02 datasheet says that data can only be written in page
@@ -222,8 +245,26 @@ static int prog_eeprom(void)
 	 * complete a given write.
 	 */
 	for (i = 0, p = &e; i < sizeof(e); i += 8, p += 8) {
-		ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
+#ifndef CONFIG_DM_I2C
+		ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i,
+				CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
 				p, min((int)(sizeof(e) - i), 8));
+#else
+		struct udevice *dev;
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
+		ret = i2c_get_chip_for_busnum(CONFIG_SYS_EEPROM_BUS_NUM,
+					      CONFIG_SYS_I2C_EEPROM_ADDR,
+					      CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
+					      &dev);
+#else
+		ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_EEPROM_ADDR,
+					      CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
+					      &dev);
+#endif
+		if (!ret)
+			ret = dm_i2c_write(dev, i, p, min((int)(sizeof(e) - i),
+							  8));
+#endif
 		if (ret)
 			break;
 		udelay(5000);	/* 5ms write cycle timing */
@@ -233,15 +274,34 @@ static int prog_eeprom(void)
 		/* Verify the write by reading back the EEPROM and comparing */
 		struct eeprom e2;
 
+#ifndef CONFIG_DM_I2C
 		ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
-			CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (void *)&e2, sizeof(e2));
+			       CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
+			       (void *)&e2, sizeof(e2));
+#else
+		struct udevice *dev;
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
+		ret = i2c_get_chip_for_busnum(CONFIG_SYS_EEPROM_BUS_NUM,
+					      CONFIG_SYS_I2C_EEPROM_ADDR,
+					      CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
+					      &dev);
+#else
+		ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_EEPROM_ADDR,
+					      CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
+					      &dev);
+#endif
+		if (!ret)
+			ret = dm_i2c_read(dev, 0, (void *)&e2, sizeof(e2));
+#endif
 		if (!ret && memcmp(&e, &e2, sizeof(e)))
 			ret = -1;
 	}
 
+#ifndef CONFIG_DM_I2C
 #ifdef CONFIG_SYS_EEPROM_BUS_NUM
 	i2c_set_bus_num(bus);
 #endif
+#endif
 
 	if (ret) {
 		printf("Programming failed.\n");
@@ -529,8 +589,24 @@ unsigned int get_cpu_board_revision(void)
 		u8 minor;         /* 0x05        Board revision, minor */
 	} be;
 
+#ifndef CONFIG_DM_I2C
 	i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
 		(void *)&be, sizeof(be));
+#else
+	struct udevice *dev;
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
+	ret = i2c_get_chip_for_busnum(CONFIG_SYS_EEPROM_BUS_NUM,
+				      CONFIG_SYS_I2C_EEPROM_ADDR,
+				      CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
+				      &dev);
+#else
+	ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_EEPROM_ADDR,
+				      CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
+				      &dev)
+#endif
+	if (!ret)
+		dm_i2c_read(dev, 0, (void *)&be, sizeof(be));
+#endif
 
 	if (be.id != (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D'))
 		return MPC85XX_CPU_BOARD_REV(0, 0);
diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index b804971..b37f3bf 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -61,13 +61,23 @@ static int find_ir_chip_on_i2c(void)
 	u8 byte;
 	int i;
 	const int ir_i2c_addr[] = {0x38, 0x08, 0x09};
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+#endif
 
 	/* Check all the address */
 	for (i = 0; i < (sizeof(ir_i2c_addr)/sizeof(ir_i2c_addr[0])); i++) {
 		i2caddress = ir_i2c_addr[i];
+#ifndef CONFIG_DM_I2C
 		ret = i2c_read(i2caddress,
 			       IR36021_MFR_ID_OFFSET, 1, (void *)&byte,
 			       sizeof(byte));
+#else
+		ret = i2c_get_chip_for_busnum(0, i2caddress, 1, &dev);
+		if (!ret)
+			ret = dm_i2c_read(dev, IR36021_MFR_ID_OFFSET,
+					  (void *)&byte, sizeof(byte));
+#endif
 		if ((ret >= 0) && (byte == IR36021_MFR_ID))
 			return i2caddress;
 	}
@@ -103,11 +113,21 @@ static int read_voltage_from_INA220(int i2caddress)
 	int i, ret, voltage_read = 0;
 	u16 vol_mon;
 	u8 buf[2];
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+#endif
 
 	for (i = 0; i < NUM_READINGS; i++) {
+#ifndef CONFIG_DM_I2C
 		ret = i2c_read(I2C_VOL_MONITOR_ADDR,
 			       I2C_VOL_MONITOR_BUS_V_OFFSET, 1,
 			       (void *)&buf, 2);
+#else
+		ret = i2c_get_chip_for_busnum(0, I2C_VOL_MONITOR_ADDR, 1, &dev);
+		if (!ret)
+			ret = dm_i2c_read(dev, I2C_VOL_MONITOR_BUS_V_OFFSET,
+					  (void *)&buf, 2);
+#endif
 		if (ret) {
 			printf("VID: failed to read core voltage\n");
 			return ret;
@@ -136,11 +156,21 @@ static int read_voltage_from_IR(int i2caddress)
 	int i, ret, voltage_read = 0;
 	u16 vol_mon;
 	u8 buf;
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+#endif
 
 	for (i = 0; i < NUM_READINGS; i++) {
+#ifndef CONFIG_DM_I2C
 		ret = i2c_read(i2caddress,
 			       IR36021_LOOP1_VOUT_OFFSET,
 			       1, (void *)&buf, 1);
+#else
+		ret = i2c_get_chip_for_busnum(0, i2caddress, 1, &dev);
+		if (!ret)
+			ret = dm_i2c_read(dev, IR36021_LOOP1_VOUT_OFFSET,
+					  (void *)&buf, 1);
+#endif
 		if (ret) {
 			printf("VID: failed to read vcpu\n");
 			return ret;
@@ -179,17 +209,33 @@ static int read_voltage_from_LTC(int i2caddress)
 	int  ret, vcode = 0;
 	u8 chan = PWM_CHANNEL0;
 
+#ifndef CONFIG_DM_I2C
 	/* select the PAGE 0 using PMBus commands PAGE for VDD*/
 	ret = i2c_write(I2C_VOL_MONITOR_ADDR,
 			PMBUS_CMD_PAGE, 1, &chan, 1);
+#else
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(0, I2C_VOL_MONITOR_ADDR, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_write(dev, PMBUS_CMD_PAGE, &chan, 1);
+#endif
 	if (ret) {
 		printf("VID: failed to select VDD Page 0\n");
 		return ret;
 	}
 
+#ifndef CONFIG_DM_I2C
 	/*read the output voltage using PMBus command READ_VOUT*/
 	ret = i2c_read(I2C_VOL_MONITOR_ADDR,
 		       PMBUS_CMD_READ_VOUT, 1, (void *)&vcode, 2);
+#else
+	ret = dm_i2c_read(dev, PMBUS_CMD_READ_VOUT, (void *)&vcode, 2);
+	if (ret) {
+		printf("VID: failed to read the volatge\n");
+		return ret;
+	}
+#endif
 	if (ret) {
 		printf("VID: failed to read the volatge\n");
 		return ret;
@@ -294,8 +340,18 @@ static int set_voltage_to_IR(int i2caddress, int vdd)
 	vid = DIV_ROUND_UP(vdd - 245, 5);
 #endif
 
+#ifndef CONFIG_DM_I2C
 	ret = i2c_write(i2caddress, IR36021_LOOP1_MANUAL_ID_OFFSET,
 			1, (void *)&vid, sizeof(vid));
+#else
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(0, i2caddress, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_write(dev, IR36021_LOOP1_MANUAL_ID_OFFSET,
+				   (void *)&vid, sizeof(vid));
+
+#endif
 	if (ret) {
 		printf("VID: failed to write VID\n");
 		return -1;
@@ -331,8 +387,17 @@ static int set_voltage_to_LTC(int i2caddress, int vdd)
 			vdd & 0xFF, (vdd & 0xFF00) >> 8};
 
 	/* Write the desired voltage code to the regulator */
+#ifndef CONFIG_DM_I2C
 	ret = i2c_write(I2C_VOL_MONITOR_ADDR,
 			PMBUS_CMD_PAGE_PLUS_WRITE, 1, (void *)&buff, 5);
+#else
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(0, I2C_VOL_MONITOR_ADDR, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_write(dev, PMBUS_CMD_PAGE_PLUS_WRITE,
+				   (void *)&buff, 5);
+#endif
 	if (ret) {
 		printf("VID: I2C failed to write to the volatge regulator\n");
 		return -1;
@@ -516,14 +581,24 @@ int adjust_vdd(ulong vdd_override)
 	}
 
 	/* check IR chip work on Intel mode*/
+#ifndef CONFIG_DM_I2C
 	ret = i2c_read(i2caddress,
 		       IR36021_INTEL_MODE_OOFSET,
 		       1, (void *)&buf, 1);
+#else
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(0, i2caddress, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_read(dev, IR36021_INTEL_MODE_OOFSET,
+				  (void *)&buf, 1);
+#endif
 	if (ret) {
 		printf("VID: failed to read IR chip mode.\n");
 		ret = -1;
 		goto exit;
 	}
+
 	if ((buf & IR36021_MODE_MASK) != IR36021_INTEL_MODE) {
 		printf("VID: IR Chip is not used in Intel mode.\n");
 		ret = -1;
@@ -688,9 +763,18 @@ int adjust_vdd(ulong vdd_override)
 	}
 
 	/* check IR chip work on Intel mode*/
+#ifndef CONFIG_DM_I2C
 	ret = i2c_read(i2caddress,
 		       IR36021_INTEL_MODE_OOFSET,
 		       1, (void *)&buf, 1);
+#else
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(0, i2caddress, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_read(dev, IR36021_INTEL_MODE_OOFSET,
+				  (void *)&buf, 1);
+#endif
 	if (ret) {
 		printf("VID: failed to read IR chip mode.\n");
 		ret = -1;
diff --git a/board/freescale/ls1028a/ls1028a.c b/board/freescale/ls1028a/ls1028a.c
index 4aa7cec..0959714 100644
--- a/board/freescale/ls1028a/ls1028a.c
+++ b/board/freescale/ls1028a/ls1028a.c
@@ -13,6 +13,7 @@
 #include <linux/libfdt.h>
 #include <env_internal.h>
 #include <asm/arch-fsl-layerscape/soc.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
 #include <i2c.h>
 #include <asm/arch/soc.h>
 #ifdef CONFIG_FSL_LS_PPA
@@ -73,7 +74,15 @@ int board_init(void)
 #if defined(CONFIG_TARGET_LS1028ARDB)
 	u8 val = I2C_MUX_CH_DEFAULT;
 
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_MUX_PCA_ADDR_PRI, 0x0b, 1, &val, 1);
+#else
+	struct udevice *dev;
+
+	if (!i2c_get_chip_for_busnum(0, I2C_MUX_PCA_ADDR_PRI, 1, &dev))
+		dm_i2c_write(dev, 0x0b, &val, 1);
+#endif
+
 #endif
 	return 0;
 }
@@ -135,6 +144,8 @@ int ft_board_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory_banks(blob, base, size, 2);
 
+	fdt_fixup_icid(blob);
+
 	return 0;
 }
 #endif
diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c b/board/freescale/ls1088a/eth_ls1088aqds.c
index d4ab979..237088a 100644
--- a/board/freescale/ls1088a/eth_ls1088aqds.c
+++ b/board/freescale/ls1088a/eth_ls1088aqds.c
@@ -81,11 +81,16 @@ struct ls1088a_qds_mdio {
 	struct mii_dev *realbus;
 };
 
+struct reg_pair {
+	uint addr;
+	u8 *val;
+};
+
 static void sgmii_configure_repeater(int dpmac)
 {
 	struct mii_dev *bus;
 	uint8_t a = 0xf;
-	int i, j, ret;
+	int i, j, k, ret;
 	unsigned short value;
 	const char *dev = "LS1088A_QDS_MDIO2";
 	int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
@@ -97,8 +102,28 @@ static void sgmii_configure_repeater(int dpmac)
 	uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
 	uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
 
+	u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
+	struct reg_pair reg_pair[10] = {
+		{6, &reg_val[0]}, {4, &reg_val[1]},
+		{8, &reg_val[2]}, {0xf, NULL},
+		{0x11, NULL}, {0x16, NULL},
+		{0x18, NULL}, {0x23, &reg_val[3]},
+		{0x2d, &reg_val[4]}, {4, &reg_val[5]},
+	};
+#ifdef CONFIG_DM_I2C
+	struct udevice *udev;
+#endif
+
 	/* Set I2c to Slot 1 */
-	i2c_write(0x77, 0, 0, &a, 1);
+#ifndef CONFIG_DM_I2C
+	ret = i2c_write(0x77, 0, 0, &a, 1);
+#else
+	ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
+	if (!ret)
+		ret = dm_i2c_write(udev, 0, &a, 1);
+#endif
+	if (ret)
+		goto error;
 
 	switch (dpmac) {
 	case 1:
@@ -144,31 +169,34 @@ static void sgmii_configure_repeater(int dpmac)
 		return;
 	}
 
+#ifdef CONFIG_DM_I2C
+	i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev);
+#endif
+
 	for (i = 0; i < 4; i++) {
 		for (j = 0; j < 4; j++) {
-			a = 0x18;
-			i2c_write(i2c_phy_addr, 6, 1, &a, 1);
-			a = 0x38;
-			i2c_write(i2c_phy_addr, 4, 1, &a, 1);
-			a = 0x4;
-			i2c_write(i2c_phy_addr, 8, 1, &a, 1);
-
-			i2c_write(i2c_phy_addr, 0xf, 1,
-				  &ch_a_eq[i], 1);
-			i2c_write(i2c_phy_addr, 0x11, 1,
-				  &ch_a_ctl2[j], 1);
-
-			i2c_write(i2c_phy_addr, 0x16, 1,
-				  &ch_b_eq[i], 1);
-			i2c_write(i2c_phy_addr, 0x18, 1,
-				  &ch_b_ctl2[j], 1);
-
-			a = 0x14;
-			i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
-			a = 0xb5;
-			i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
-			a = 0x20;
-			i2c_write(i2c_phy_addr, 4, 1, &a, 1);
+			reg_pair[3].val = &ch_a_eq[i];
+			reg_pair[4].val = &ch_a_ctl2[j];
+			reg_pair[5].val = &ch_b_eq[i];
+			reg_pair[6].val = &ch_b_ctl2[j];
+			for (k = 0; k < 10; k++) {
+#ifndef CONFIG_DM_I2C
+				ret = i2c_write(i2c_phy_addr,
+						reg_pair[k].addr,
+						1, reg_pair[k].val, 1);
+#else
+				ret = i2c_get_chip_for_busnum(0,
+							      i2c_phy_addr,
+							      1, &udev);
+				if (!ret)
+					ret = dm_i2c_write(udev,
+							   reg_pair[k].addr,
+							   reg_pair[k].val, 1);
+#endif
+				if (ret)
+					goto error;
+			}
+
 			mdelay(100);
 			ret = miiphy_read(dev, phy_addr, 0x11, &value);
 			if (ret > 0)
@@ -203,7 +231,7 @@ error:
 static void qsgmii_configure_repeater(int dpmac)
 {
 	uint8_t a = 0xf;
-	int i, j;
+	int i, j, k;
 	int i2c_phy_addr = 0;
 	int phy_addr = 0;
 	int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
@@ -213,12 +241,32 @@ static void qsgmii_configure_repeater(int dpmac)
 	uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
 	uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
 
+	u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
+	struct reg_pair reg_pair[10] = {
+		{6, &reg_val[0]}, {4, &reg_val[1]},
+		{8, &reg_val[2]}, {0xf, NULL},
+		{0x11, NULL}, {0x16, NULL},
+		{0x18, NULL}, {0x23, &reg_val[3]},
+		{0x2d, &reg_val[4]}, {4, &reg_val[5]},
+	};
+
 	const char *dev = mdio_names[EMI1_SLOT1];
 	int ret = 0;
 	unsigned short value;
+#ifdef CONFIG_DM_I2C
+	struct udevice *udev;
+#endif
 
 	/* Set I2c to Slot 1 */
-	i2c_write(0x77, 0, 0, &a, 1);
+#ifndef CONFIG_DM_I2C
+	ret = i2c_write(0x77, 0, 0, &a, 1);
+#else
+	ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
+	if (!ret)
+		ret = dm_i2c_write(udev, 0, &a, 1);
+#endif
+	if (ret)
+		goto error;
 
 	switch (dpmac) {
 	case 7:
@@ -252,28 +300,35 @@ static void qsgmii_configure_repeater(int dpmac)
 		return;
 	}
 
+#ifdef CONFIG_DM_I2C
+	i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev);
+#endif
+
 	for (i = 0; i < 4; i++) {
 		for (j = 0; j < 4; j++) {
-			a = 0x18;
-			i2c_write(i2c_phy_addr, 6, 1, &a, 1);
-			a = 0x38;
-			i2c_write(i2c_phy_addr, 4, 1, &a, 1);
-			a = 0x4;
-			i2c_write(i2c_phy_addr, 8, 1, &a, 1);
-
-			i2c_write(i2c_phy_addr, 0xf, 1, &ch_a_eq[i], 1);
-			i2c_write(i2c_phy_addr, 0x11, 1, &ch_a_ctl2[j], 1);
-
-			i2c_write(i2c_phy_addr, 0x16, 1, &ch_b_eq[i], 1);
-			i2c_write(i2c_phy_addr, 0x18, 1, &ch_b_ctl2[j], 1);
-
-			a = 0x14;
-			i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
-			a = 0xb5;
-			i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
-			a = 0x20;
-			i2c_write(i2c_phy_addr, 4, 1, &a, 1);
-			mdelay(100);
+			reg_pair[3].val = &ch_a_eq[i];
+			reg_pair[4].val = &ch_a_ctl2[j];
+			reg_pair[5].val = &ch_b_eq[i];
+			reg_pair[6].val = &ch_b_ctl2[j];
+
+			for (k = 0; k < 10; k++) {
+#ifndef CONFIG_DM_I2C
+				ret = i2c_write(i2c_phy_addr,
+						reg_pair[k].addr,
+						1, reg_pair[k].val, 1);
+#else
+				ret = i2c_get_chip_for_busnum(0,
+							      i2c_addr[dpmac],
+							      1, &udev);
+				if (!ret)
+					ret = dm_i2c_write(udev,
+							   reg_pair[k].addr,
+							   reg_pair[k].val, 1);
+#endif
+				if (ret)
+					goto error;
+			}
+
 			ret = miiphy_read(dev, phy_addr, 0x11, &value);
 			if (ret > 0)
 				goto error;
diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c
index f0bea73..f159298 100644
--- a/board/freescale/ls1088a/ls1088a.c
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -21,6 +21,7 @@
 #include <hwconfig.h>
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/soc.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
 
 #include "../common/qixis.h"
 #include "ls1088a_qixis.h"
@@ -374,7 +375,15 @@ int select_i2c_ch_pca9547(u8 ch)
 {
 	int ret;
 
+#ifndef CONFIG_DM_I2C
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#else
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(0, I2C_MUX_PCA_ADDR_PRI, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_write(dev, 0, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -393,38 +402,89 @@ void board_retimer_init(void)
 
 	/* Access to Control/Shared register */
 	reg = 0x0;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
+#else
+	struct udevice *dev;
+
+	i2c_get_chip_for_busnum(0, I2C_RETIMER_ADDR, 1, &dev);
+	dm_i2c_write(dev, 0xff, &reg, 1);
+#endif
 
 	/* Read device revision and ID */
+#ifndef CONFIG_DM_I2C
 	i2c_read(I2C_RETIMER_ADDR, 1, 1, &reg, 1);
+#else
+	dm_i2c_read(dev, 1, &reg, 1);
+#endif
 	debug("Retimer version id = 0x%x\n", reg);
 
 	/* Enable Broadcast. All writes target all channel register sets */
 	reg = 0x0c;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0xff, &reg, 1);
+#endif
 
 	/* Reset Channel Registers */
+#ifndef CONFIG_DM_I2C
 	i2c_read(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
+#else
+	dm_i2c_read(dev, 0, &reg, 1);
+#endif
 	reg |= 0x4;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0, &reg, 1);
+#endif
 
 	/* Set data rate as 10.3125 Gbps */
 	reg = 0x90;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR, 0x60, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0x60, &reg, 1);
+#endif
 	reg = 0xb3;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR, 0x61, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0x61, &reg, 1);
+#endif
 	reg = 0x90;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR, 0x62, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0x62, &reg, 1);
+#endif
 	reg = 0xb3;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR, 0x63, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0x63, &reg, 1);
+#endif
 	reg = 0xcd;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0x64, &reg, 1);
+#endif
 
 	/* Select VCO Divider to full rate (000) */
+#ifndef CONFIG_DM_I2C
 	i2c_read(I2C_RETIMER_ADDR, 0x2F, 1, &reg, 1);
+#else
+	dm_i2c_read(dev, 0x2F, &reg, 1);
+#endif
 	reg &= 0x0f;
 	reg |= 0x70;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR, 0x2F, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0x2F, &reg, 1);
+#endif
 
 #ifdef	CONFIG_TARGET_LS1088AQDS
 	/* Retimer is connected to I2C1_CH5 */
@@ -432,38 +492,88 @@ void board_retimer_init(void)
 
 	/* Access to Control/Shared register */
 	reg = 0x0;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR2, 0xff, 1, &reg, 1);
+#else
+	i2c_get_chip_for_busnum(0, I2C_RETIMER_ADDR2, 1, &dev);
+	dm_i2c_write(dev, 0xff, &reg, 1);
+#endif
 
 	/* Read device revision and ID */
+#ifndef CONFIG_DM_I2C
 	i2c_read(I2C_RETIMER_ADDR2, 1, 1, &reg, 1);
+#else
+	dm_i2c_read(dev, 1, &reg, 1);
+#endif
 	debug("Retimer version id = 0x%x\n", reg);
 
 	/* Enable Broadcast. All writes target all channel register sets */
 	reg = 0x0c;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR2, 0xff, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0xff, &reg, 1);
+#endif
 
 	/* Reset Channel Registers */
+#ifndef CONFIG_DM_I2C
 	i2c_read(I2C_RETIMER_ADDR2, 0, 1, &reg, 1);
+#else
+	dm_i2c_read(dev, 0, &reg, 1);
+#endif
 	reg |= 0x4;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR2, 0, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0, &reg, 1);
+#endif
 
 	/* Set data rate as 10.3125 Gbps */
 	reg = 0x90;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR2, 0x60, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0x60, &reg, 1);
+#endif
 	reg = 0xb3;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR2, 0x61, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0x61, &reg, 1);
+#endif
 	reg = 0x90;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR2, 0x62, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0x62, &reg, 1);
+#endif
 	reg = 0xb3;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR2, 0x63, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0x63, &reg, 1);
+#endif
 	reg = 0xcd;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR2, 0x64, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0x64, &reg, 1);
+#endif
 
 	/* Select VCO Divider to full rate (000) */
+#ifndef CONFIG_DM_I2C
 	i2c_read(I2C_RETIMER_ADDR2, 0x2F, 1, &reg, 1);
+#else
+	dm_i2c_read(dev, 0x2F, &reg, 1);
+#endif
 	reg &= 0x0f;
 	reg |= 0x70;
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_RETIMER_ADDR2, 0x2F, 1, &reg, 1);
+#else
+	dm_i2c_write(dev, 0x2F, &reg, 1);
+#endif
+
 #endif
 	/*return the default channel*/
 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
@@ -482,6 +592,32 @@ int misc_init_r(void)
 		QIXIS_WRITE(brdcfg[5], brdcfg5);
 	}
 #endif
+
+#ifdef CONFIG_TARGET_LS1088AQDS
+	 u8 brdcfg4, brdcfg5;
+
+	if (hwconfig("dspi-on-board")) {
+		brdcfg4 = QIXIS_READ(brdcfg[4]);
+		brdcfg4 &= ~BRDCFG4_USBOSC_MASK;
+		brdcfg4 |= BRDCFG4_SPI;
+		QIXIS_WRITE(brdcfg[4], brdcfg4);
+
+		brdcfg5 = QIXIS_READ(brdcfg[5]);
+		brdcfg5 &= ~BRDCFG5_SPR_MASK;
+		brdcfg5 |= BRDCFG5_SPI_ON_BOARD;
+		QIXIS_WRITE(brdcfg[5], brdcfg5);
+	} else if (hwconfig("dspi-off-board")) {
+		brdcfg4 = QIXIS_READ(brdcfg[4]);
+		brdcfg4 &= ~BRDCFG4_USBOSC_MASK;
+		brdcfg4 |= BRDCFG4_SPI;
+		QIXIS_WRITE(brdcfg[4], brdcfg4);
+
+		brdcfg5 = QIXIS_READ(brdcfg[5]);
+		brdcfg5 &= ~BRDCFG5_SPR_MASK;
+		brdcfg5 |= BRDCFG5_SPI_OFF_BOARD;
+		QIXIS_WRITE(brdcfg[5], brdcfg5);
+	}
+#endif
 	return 0;
 }
 #endif
@@ -500,16 +636,30 @@ int get_serdes_volt(void)
 	u8 chan = PWM_CHANNEL0;
 
 	/* Select the PAGE 0 using PMBus commands PAGE for VDD */
+#ifndef CONFIG_DM_I2C
 	ret = i2c_write(I2C_SVDD_MONITOR_ADDR,
 			PMBUS_CMD_PAGE, 1, &chan, 1);
+#else
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(0, I2C_SVDD_MONITOR_ADDR, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_write(dev, PMBUS_CMD_PAGE,
+				   &chan, 1);
+#endif
+
 	if (ret) {
 		printf("VID: failed to select VDD Page 0\n");
 		return ret;
 	}
 
 	/* Read the output voltage using PMBus command READ_VOUT */
+#ifndef CONFIG_DM_I2C
 	ret = i2c_read(I2C_SVDD_MONITOR_ADDR,
 		       PMBUS_CMD_READ_VOUT, 1, (void *)&vcode, 2);
+#else
+	dm_i2c_read(dev, PMBUS_CMD_READ_VOUT, (void *)&vcode, 2);
+#endif
 	if (ret) {
 		printf("VID: failed to read the volatge\n");
 		return ret;
@@ -525,8 +675,17 @@ int set_serdes_volt(int svdd)
 			svdd & 0xFF, (svdd & 0xFF00) >> 8};
 
 	/* Write the desired voltage code to the SVDD regulator */
+#ifndef CONFIG_DM_I2C
 	ret = i2c_write(I2C_SVDD_MONITOR_ADDR,
 			PMBUS_CMD_PAGE_PLUS_WRITE, 1, (void *)&buff, 5);
+#else
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(0, I2C_SVDD_MONITOR_ADDR, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_write(dev, PMBUS_CMD_PAGE_PLUS_WRITE,
+				   (void *)&buff, 5);
+#endif
 	if (ret) {
 		printf("VID: I2C failed to write to the volatge regulator\n");
 		return -1;
@@ -557,8 +716,18 @@ int set_serdes_volt(int svdd)
 	printf("SVDD changing of RDB\n");
 
 	/* Read the BRDCFG54 via CLPD */
+#ifndef CONFIG_DM_I2C
 	ret = i2c_read(CONFIG_SYS_I2C_FPGA_ADDR,
 		       QIXIS_BRDCFG4_OFFSET, 1, (void *)&brdcfg4, 1);
+#else
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_FPGA_ADDR, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_read(dev, QIXIS_BRDCFG4_OFFSET,
+				  (void *)&brdcfg4, 1);
+#endif
+
 	if (ret) {
 		printf("VID: I2C failed to read the CPLD BRDCFG4\n");
 		return -1;
@@ -567,8 +736,14 @@ int set_serdes_volt(int svdd)
 	brdcfg4 = brdcfg4 | 0x08;
 
 	/* Write to the BRDCFG4 */
+#ifndef CONFIG_DM_I2C
 	ret = i2c_write(CONFIG_SYS_I2C_FPGA_ADDR,
 			QIXIS_BRDCFG4_OFFSET, 1, (void *)&brdcfg4, 1);
+#else
+	ret = dm_i2c_write(dev, QIXIS_BRDCFG4_OFFSET,
+			   (void *)&brdcfg4, 1);
+#endif
+
 	if (ret) {
 		debug("VID: I2C failed to set the SVDD CPLD BRDCFG4\n");
 		return -1;
@@ -739,11 +914,26 @@ void fsl_fdt_fixup_flash(void *fdt)
 int ft_board_setup(void *blob, bd_t *bd)
 {
 	int i;
-	u64 base[CONFIG_NR_DRAM_BANKS];
-	u64 size[CONFIG_NR_DRAM_BANKS];
+	u16 mc_memory_bank = 0;
+
+	u64 *base;
+	u64 *size;
+	u64 mc_memory_base = 0;
+	u64 mc_memory_size = 0;
+	u16 total_memory_banks;
 
 	ft_cpu_setup(blob, bd);
 
+	fdt_fixup_mc_ddr(&mc_memory_base, &mc_memory_size);
+
+	if (mc_memory_base != 0)
+		mc_memory_bank++;
+
+	total_memory_banks = CONFIG_NR_DRAM_BANKS + mc_memory_bank;
+
+	base = calloc(total_memory_banks, sizeof(u64));
+	size = calloc(total_memory_banks, sizeof(u64));
+
 	/* fixup DT for the two GPP DDR banks */
 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 		base[i] = gd->bd->bi_dram[i].start;
@@ -760,7 +950,17 @@ int ft_board_setup(void *blob, bd_t *bd)
 		size[1] = gd->arch.resv_ram - base[1];
 #endif
 
-	fdt_fixup_memory_banks(blob, base, size, CONFIG_NR_DRAM_BANKS);
+	if (mc_memory_base != 0) {
+		for (i = 0; i <= total_memory_banks; i++) {
+			if (base[i] == 0 && size[i] == 0) {
+				base[i] = mc_memory_base;
+				size[i] = mc_memory_size;
+				break;
+			}
+		}
+	}
+
+	fdt_fixup_memory_banks(blob, base, size, total_memory_banks);
 
 	fdt_fsl_mc_fixup_iommu_map_entry(blob);
 
@@ -769,6 +969,9 @@ int ft_board_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_FSL_MC_ENET
 	fdt_fixup_board_enet(blob);
 #endif
+
+	fdt_fixup_icid(blob);
+
 	if (is_pb_board())
 		fixup_ls1088ardb_pb_banner(blob);
 
diff --git a/board/freescale/ls1088a/ls1088a_qixis.h b/board/freescale/ls1088a/ls1088a_qixis.h
index c588526..e3502eb 100644
--- a/board/freescale/ls1088a/ls1088a_qixis.h
+++ b/board/freescale/ls1088a/ls1088a_qixis.h
@@ -41,4 +41,15 @@
 #define BRDCFG5_SPISDHC_MASK		0x0C
 #define BRDCFG5_FORCE_SD		0x08
 
+/* Definitions of QIXIS Registers for LS1088AQDS */
+
+/* BRDCFG4 */
+#define BRDCFG4_USBOSC_MASK   0x01
+#define BRDCFG4_SPI 0x01
+
+/* BRDCFG5 */
+#define BRDCFG5_SPR_MASK 0x0f
+#define BRDCFG5_SPI_ON_BOARD 0x0a
+#define BRDCFG5_SPI_OFF_BOARD 0x0f
+
 #endif
diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c
index 1b4e6c6..6a8788c 100644
--- a/board/freescale/ls2080aqds/eth.c
+++ b/board/freescale/ls2080aqds/eth.c
@@ -90,11 +90,16 @@ struct ls2080a_qds_mdio {
 	struct mii_dev *realbus;
 };
 
+struct reg_pair {
+	uint addr;
+	u8 *val;
+};
+
 static void sgmii_configure_repeater(int serdes_port)
 {
 	struct mii_dev *bus;
 	uint8_t a = 0xf;
-	int i, j, ret;
+	int i, j, k, ret;
 	int dpmac_id = 0, dpmac, mii_bus = 0;
 	unsigned short value;
 	char dev[2][20] = {"LS2080A_QDS_MDIO0", "LS2080A_QDS_MDIO3"};
@@ -105,10 +110,30 @@ static void sgmii_configure_repeater(int serdes_port)
 	uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
 	uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
 
+	u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
+	struct reg_pair reg_pair[10] = {
+			{6, &reg_val[0]}, {4, &reg_val[1]},
+			{8, &reg_val[2]}, {0xf, NULL},
+			{0x11, NULL}, {0x16, NULL},
+			{0x18, NULL}, {0x23, &reg_val[3]},
+			{0x2d, &reg_val[4]}, {4, &reg_val[5]},
+	};
+
 	int *riser_phy_addr = &xqsgii_riser_phy_addr[0];
+#ifdef CONFIG_DM_I2C
+	struct udevice *udev;
+#endif
 
 	/* Set I2c to Slot 1 */
-	i2c_write(0x77, 0, 0, &a, 1);
+#ifndef CONFIG_DM_I2C
+	ret = i2c_write(0x77, 0, 0, &a, 1);
+#else
+	ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
+	if (!ret)
+		ret = dm_i2c_write(udev, 0, &a, 1);
+#endif
+	if (ret)
+		goto error;
 
 	for (dpmac = 0; dpmac < 8; dpmac++) {
 		/* Check the PHY status */
@@ -121,7 +146,15 @@ static void sgmii_configure_repeater(int serdes_port)
 			mii_bus = 1;
 			dpmac_id = dpmac + 9;
 			a = 0xb;
-			i2c_write(0x76, 0, 0, &a, 1);
+#ifndef CONFIG_DM_I2C
+			ret = i2c_write(0x76, 0, 0, &a, 1);
+#else
+			ret = i2c_get_chip_for_busnum(0, 0x76, 1, &udev);
+			if (!ret)
+				ret = dm_i2c_write(udev, 0, &a, 1);
+#endif
+			if (ret)
+				goto error;
 			break;
 		}
 
@@ -154,29 +187,29 @@ static void sgmii_configure_repeater(int serdes_port)
 
 		for (i = 0; i < 4; i++) {
 			for (j = 0; j < 4; j++) {
-				a = 0x18;
-				i2c_write(i2c_addr[dpmac], 6, 1, &a, 1);
-				a = 0x38;
-				i2c_write(i2c_addr[dpmac], 4, 1, &a, 1);
-				a = 0x4;
-				i2c_write(i2c_addr[dpmac], 8, 1, &a, 1);
-
-				i2c_write(i2c_addr[dpmac], 0xf, 1,
-					  &ch_a_eq[i], 1);
-				i2c_write(i2c_addr[dpmac], 0x11, 1,
-					  &ch_a_ctl2[j], 1);
-
-				i2c_write(i2c_addr[dpmac], 0x16, 1,
-					  &ch_b_eq[i], 1);
-				i2c_write(i2c_addr[dpmac], 0x18, 1,
-					  &ch_b_ctl2[j], 1);
-
-				a = 0x14;
-				i2c_write(i2c_addr[dpmac], 0x23, 1, &a, 1);
-				a = 0xb5;
-				i2c_write(i2c_addr[dpmac], 0x2d, 1, &a, 1);
-				a = 0x20;
-				i2c_write(i2c_addr[dpmac], 4, 1, &a, 1);
+				reg_pair[3].val = &ch_a_eq[i];
+				reg_pair[4].val = &ch_a_ctl2[j];
+				reg_pair[5].val = &ch_b_eq[i];
+				reg_pair[6].val = &ch_b_ctl2[j];
+
+				for (k = 0; k < 10; k++) {
+#ifndef CONFIG_DM_I2C
+					ret = i2c_write(i2c_addr[dpmac],
+							reg_pair[k].addr,
+							1, reg_pair[k].val, 1);
+#else
+					ret = i2c_get_chip_for_busnum(0,
+							    i2c_addr[dpmac],
+							    1, &udev);
+					if (!ret)
+						ret = dm_i2c_write(udev,
+							  reg_pair[k].addr,
+							  reg_pair[k].val, 1);
+#endif
+					if (ret)
+						goto error;
+				}
+
 				mdelay(100);
 				ret = miiphy_read(dev[mii_bus],
 						  riser_phy_addr[dpmac],
@@ -217,7 +250,7 @@ error:
 static void qsgmii_configure_repeater(int dpmac)
 {
 	uint8_t a = 0xf;
-	int i, j;
+	int i, j, k;
 	int i2c_phy_addr = 0;
 	int phy_addr = 0;
 	int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
@@ -227,12 +260,32 @@ static void qsgmii_configure_repeater(int dpmac)
 	uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
 	uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
 
+	u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
+	struct reg_pair reg_pair[10] = {
+		{6, &reg_val[0]}, {4, &reg_val[1]},
+		{8, &reg_val[2]}, {0xf, NULL},
+		{0x11, NULL}, {0x16, NULL},
+		{0x18, NULL}, {0x23, &reg_val[3]},
+		{0x2d, &reg_val[4]}, {4, &reg_val[5]},
+	};
+
 	const char *dev = "LS2080A_QDS_MDIO0";
 	int ret = 0;
 	unsigned short value;
+#ifdef CONFIG_DM_I2C
+	struct udevice *udev;
+#endif
 
 	/* Set I2c to Slot 1 */
-	i2c_write(0x77, 0, 0, &a, 1);
+#ifndef CONFIG_DM_I2C
+	ret = i2c_write(0x77, 0, 0, &a, 1);
+#else
+	ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
+	if (!ret)
+		ret = dm_i2c_write(udev, 0, &a, 1);
+#endif
+	if (ret)
+		goto error;
 
 	switch (dpmac) {
 	case 1:
@@ -283,25 +336,29 @@ static void qsgmii_configure_repeater(int dpmac)
 
 	for (i = 0; i < 4; i++) {
 		for (j = 0; j < 4; j++) {
-			a = 0x18;
-			i2c_write(i2c_phy_addr, 6, 1, &a, 1);
-			a = 0x38;
-			i2c_write(i2c_phy_addr, 4, 1, &a, 1);
-			a = 0x4;
-			i2c_write(i2c_phy_addr, 8, 1, &a, 1);
-
-			i2c_write(i2c_phy_addr, 0xf, 1, &ch_a_eq[i], 1);
-			i2c_write(i2c_phy_addr, 0x11, 1, &ch_a_ctl2[j], 1);
-
-			i2c_write(i2c_phy_addr, 0x16, 1, &ch_b_eq[i], 1);
-			i2c_write(i2c_phy_addr, 0x18, 1, &ch_b_ctl2[j], 1);
-
-			a = 0x14;
-			i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
-			a = 0xb5;
-			i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
-			a = 0x20;
-			i2c_write(i2c_phy_addr, 4, 1, &a, 1);
+			reg_pair[3].val = &ch_a_eq[i];
+			reg_pair[4].val = &ch_a_ctl2[j];
+			reg_pair[5].val = &ch_b_eq[i];
+			reg_pair[6].val = &ch_b_ctl2[j];
+
+			for (k = 0; k < 10; k++) {
+#ifndef CONFIG_DM_I2C
+				ret = i2c_write(i2c_phy_addr,
+						reg_pair[k].addr,
+						1, reg_pair[k].val, 1);
+#else
+				ret = i2c_get_chip_for_busnum(0,
+							      i2c_phy_addr,
+							      1, &udev);
+				if (!ret)
+					ret = dm_i2c_write(udev,
+							   reg_pair[k].addr,
+							   reg_pair[k].val, 1);
+#endif
+				if (ret)
+					goto error;
+			}
+
 			mdelay(100);
 			ret = miiphy_read(dev, phy_addr, 0x11, &value);
 			if (ret > 0)
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index e9c0557..91c8035 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -161,8 +161,16 @@ unsigned long get_board_ddr_clk(void)
 int select_i2c_ch_pca9547(u8 ch)
 {
 	int ret;
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
 
+	ret = i2c_get_chip_for_busnum(0, I2C_MUX_PCA_ADDR_PRI, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_write(dev, 0, &ch, 1);
+
+#else
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -225,7 +233,15 @@ int board_init(void)
 	gd->env_addr = (ulong)&default_environment[0];
 #endif
 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+
+#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT
+#ifdef CONFIG_DM_I2C
+	rtc_enable_32khz_output(0, CONFIG_SYS_I2C_RTC_ADDR);
+#else
 	rtc_enable_32khz_output();
+#endif
+#endif
+
 #ifdef CONFIG_FSL_CAAM
 	sec_init();
 #endif
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 2b2dbbb..e20267f 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -164,7 +164,16 @@ int select_i2c_ch_pca9547(u8 ch)
 {
 	int ret;
 
+#ifndef CONFIG_DM_I2C
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#else
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(0, I2C_MUX_PCA_ADDR_PRI, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_write(dev, 0, &ch, 1);
+#endif
+
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -410,11 +419,27 @@ void fsl_fdt_fixup_flash(void *fdt)
 
 int ft_board_setup(void *blob, bd_t *bd)
 {
-	u64 base[CONFIG_NR_DRAM_BANKS];
-	u64 size[CONFIG_NR_DRAM_BANKS];
+	int i;
+	u16 mc_memory_bank = 0;
+
+	u64 *base;
+	u64 *size;
+	u64 mc_memory_base = 0;
+	u64 mc_memory_size = 0;
+	u16 total_memory_banks;
 
 	ft_cpu_setup(blob, bd);
 
+	fdt_fixup_mc_ddr(&mc_memory_base, &mc_memory_size);
+
+	if (mc_memory_base != 0)
+		mc_memory_bank++;
+
+	total_memory_banks = CONFIG_NR_DRAM_BANKS + mc_memory_bank;
+
+	base = calloc(total_memory_banks, sizeof(u64));
+	size = calloc(total_memory_banks, sizeof(u64));
+
 	/* fixup DT for the two GPP DDR banks */
 	base[0] = gd->bd->bi_dram[0].start;
 	size[0] = gd->bd->bi_dram[0].size;
@@ -431,7 +456,17 @@ int ft_board_setup(void *blob, bd_t *bd)
 		size[1] = gd->arch.resv_ram - base[1];
 #endif
 
-	fdt_fixup_memory_banks(blob, base, size, 2);
+	if (mc_memory_base != 0) {
+		for (i = 0; i <= total_memory_banks; i++) {
+			if (base[i] == 0 && size[i] == 0) {
+				base[i] = mc_memory_base;
+				size[i] = mc_memory_size;
+				break;
+			}
+		}
+	}
+
+	fdt_fixup_memory_banks(blob, base, size, total_memory_banks);
 
 	fdt_fsl_mc_fixup_iommu_map_entry(blob);
 
diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index f3885fa..7f19a1a 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -74,7 +74,15 @@ int select_i2c_ch_pca9547(u8 ch)
 {
 	int ret;
 
+#ifndef CONFIG_DM_I2C
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#else
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(0, I2C_MUX_PCA_ADDR_PRI, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_write(dev, 0, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -402,6 +410,26 @@ int config_board_mux(void)
 
 	return 0;
 }
+#elif defined(CONFIG_TARGET_LX2160ARDB)
+int config_board_mux(void)
+{
+	u8 brdcfg;
+
+	brdcfg = QIXIS_READ(brdcfg[4]);
+	/* The BRDCFG4 register controls general board configuration.
+	 *|-------------------------------------------|
+	 *|Field  | Function                          |
+	 *|-------------------------------------------|
+	 *|5      | CAN I/O Enable (net CFG_CAN_EN_B):|
+	 *|CAN_EN | 0= CAN transceivers are disabled. |
+	 *|       | 1= CAN transceivers are enabled.  |
+	 *|-------------------------------------------|
+	 */
+	brdcfg |= BIT_MASK(5);
+	QIXIS_WRITE(brdcfg[4], brdcfg);
+
+	return 0;
+}
 #else
 int config_board_mux(void)
 {
@@ -529,11 +557,26 @@ void board_quiesce_devices(void)
 int ft_board_setup(void *blob, bd_t *bd)
 {
 	int i;
-	u64 base[CONFIG_NR_DRAM_BANKS];
-	u64 size[CONFIG_NR_DRAM_BANKS];
+	u16 mc_memory_bank = 0;
+
+	u64 *base;
+	u64 *size;
+	u64 mc_memory_base = 0;
+	u64 mc_memory_size = 0;
+	u16 total_memory_banks;
 
 	ft_cpu_setup(blob, bd);
 
+	fdt_fixup_mc_ddr(&mc_memory_base, &mc_memory_size);
+
+	if (mc_memory_base != 0)
+		mc_memory_bank++;
+
+	total_memory_banks = CONFIG_NR_DRAM_BANKS + mc_memory_bank;
+
+	base = calloc(total_memory_banks, sizeof(u64));
+	size = calloc(total_memory_banks, sizeof(u64));
+
 	/* fixup DT for the three GPP DDR banks */
 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 		base[i] = gd->bd->bi_dram[i].start;
@@ -553,7 +596,17 @@ int ft_board_setup(void *blob, bd_t *bd)
 		size[2] = gd->arch.resv_ram - base[2];
 #endif
 
-	fdt_fixup_memory_banks(blob, base, size, CONFIG_NR_DRAM_BANKS);
+	if (mc_memory_base != 0) {
+		for (i = 0; i <= total_memory_banks; i++) {
+			if (base[i] == 0 && size[i] == 0) {
+				base[i] = mc_memory_base;
+				size[i] = mc_memory_size;
+				break;
+			}
+		}
+	}
+
+	fdt_fixup_memory_banks(blob, base, size, total_memory_banks);
 
 #ifdef CONFIG_USB
 	fsl_fdt_fixup_dr_usb(blob, bd);
diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
index c5c5190..3170d81 100644
--- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028AQDS=y
 CONFIG_TFABOOT=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SECURE_BOOT=y
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_NR_DRAM_BANKS=2
@@ -8,7 +9,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -31,6 +31,12 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
@@ -51,6 +57,8 @@ CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2127=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig
index 7cfcaf0..2da7b1d 100644
--- a/configs/ls1028aqds_tfa_defconfig
+++ b/configs/ls1028aqds_tfa_defconfig
@@ -1,13 +1,13 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028AQDS=y
 CONFIG_TFABOOT=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -34,6 +34,12 @@ CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
@@ -54,6 +60,8 @@ CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2127=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
index e59ab58..c1e88b5 100644
--- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028ARDB=y
 CONFIG_TFABOOT=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SECURE_BOOT=y
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_NR_DRAM_BANKS=2
@@ -8,7 +9,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -31,6 +31,12 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
@@ -51,6 +57,8 @@ CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2127=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index ddb1453..4d0c12f 100644
--- a/configs/ls1028ardb_tfa_defconfig
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -1,13 +1,13 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028ARDB=y
 CONFIG_TFABOOT=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -34,6 +34,12 @@ CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
@@ -54,6 +60,8 @@ CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2127=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig
index ff37969..cc99877 100644
--- a/configs/ls1043aqds_qspi_defconfig
+++ b/configs/ls1043aqds_qspi_defconfig
@@ -35,6 +35,7 @@ CONFIG_FSL_CAAM=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_BAR is not set
 CONFIG_PHYLIB=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
@@ -47,6 +48,7 @@ CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig
index 3f5af93..ecd3023 100644
--- a/configs/ls1043aqds_sdcard_qspi_defconfig
+++ b/configs/ls1043aqds_sdcard_qspi_defconfig
@@ -49,6 +49,7 @@ CONFIG_FSL_CAAM=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_BAR is not set
 CONFIG_PHYLIB=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
@@ -61,6 +62,7 @@ CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig
index f935087..b49ac2c 100644
--- a/configs/ls1043aqds_tfa_defconfig
+++ b/configs/ls1043aqds_tfa_defconfig
@@ -47,6 +47,7 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_BUS=1
+# CONFIG_SPI_FLASH_BAR is not set
 CONFIG_PHYLIB=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
@@ -58,6 +59,7 @@ CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
diff --git a/configs/ls1088aqds_tfa_defconfig b/configs/ls1088aqds_tfa_defconfig
index a0ea696..145beea 100644
--- a/configs/ls1088aqds_tfa_defconfig
+++ b/configs/ls1088aqds_tfa_defconfig
@@ -2,13 +2,13 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1088AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -36,6 +36,12 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
@@ -53,6 +59,8 @@ CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2127=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
index 4f22a44..45df134 100644
--- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1088ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SECURE_BOOT=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
@@ -9,7 +10,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -34,6 +34,12 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
@@ -47,6 +53,8 @@ CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2127=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig
index 3a99239..b7c40a4 100644
--- a/configs/ls1088ardb_tfa_defconfig
+++ b/configs/ls1088ardb_tfa_defconfig
@@ -2,13 +2,13 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1088ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -35,6 +35,12 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
@@ -48,6 +54,8 @@ CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2127=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
diff --git a/configs/ls2088aqds_tfa_defconfig b/configs/ls2088aqds_tfa_defconfig
index 180fdc0..f0ebe7b 100644
--- a/configs/ls2088aqds_tfa_defconfig
+++ b/configs/ls2088aqds_tfa_defconfig
@@ -26,7 +26,6 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
 CONFIG_MP=y
 # CONFIG_ISO_PARTITION is not set
 CONFIG_OF_CONTROL=y
@@ -38,6 +37,12 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
@@ -53,6 +58,7 @@ CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
diff --git a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
index e062d6b..0f84055 100644
--- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
@@ -2,13 +2,13 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS2080ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SECURE_BOOT=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -29,13 +29,18 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
@@ -54,6 +59,7 @@ CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
 CONFIG_DM_SCSI=y
 CONFIG_CONS_INDEX=2
 CONFIG_SYS_NS16550=y
diff --git a/configs/ls2088ardb_tfa_defconfig b/configs/ls2088ardb_tfa_defconfig
index 7654948..014acc5 100644
--- a/configs/ls2088ardb_tfa_defconfig
+++ b/configs/ls2088ardb_tfa_defconfig
@@ -2,12 +2,12 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS2080ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -28,7 +28,6 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2088a-rdb-qspi"
@@ -39,6 +38,12 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
@@ -58,6 +63,7 @@ CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
 CONFIG_DM_SCSI=y
 CONFIG_CONS_INDEX=2
 CONFIG_SYS_NS16550=y
diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
index 7105095..6cc73c4 100644
--- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
@@ -61,3 +61,12 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_CMD_DATE=y
+CONFIG_RTC_PCF2127=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig
index caa411f..4188fe0 100644
--- a/configs/lx2160aqds_tfa_defconfig
+++ b/configs/lx2160aqds_tfa_defconfig
@@ -57,3 +57,12 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_CMD_DATE=y
+CONFIG_RTC_PCF2127=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
index 92e7c54..17b90e4 100644
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@@ -58,3 +58,10 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_CMD_DATE=y
+CONFIG_RTC_PCF2127=y
diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig
index 2639f76..f1ab871 100644
--- a/configs/lx2160ardb_tfa_defconfig
+++ b/configs/lx2160ardb_tfa_defconfig
@@ -57,3 +57,10 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_CMD_DATE=y
+CONFIG_RTC_PCF2127=y
diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c
index e1f69a1..ac0783b 100644
--- a/drivers/ddr/fsl/main.c
+++ b/drivers/ddr/fsl/main.c
@@ -92,7 +92,10 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
 	uint8_t dummy = 0;
 #endif
 
+#ifndef CONFIG_DM_I2C
 	i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
+#endif
+
 
 #ifdef CONFIG_SYS_FSL_DDR4
 	/*
@@ -101,6 +104,7 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
 	 * To access the upper 256 bytes, we need to set EE page address to 1
 	 * See Jedec standar No. 21-C for detail
 	 */
+#ifndef CONFIG_DM_I2C
 	i2c_write(SPD_SPA0_ADDRESS, 0, 1, &dummy, 1);
 	ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, 256);
 	if (!ret) {
@@ -111,8 +115,38 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
 				   (int)sizeof(generic_spd_eeprom_t) - 256));
 	}
 #else
+	struct udevice *dev;
+	int read_len = min(256, (int)sizeof(generic_spd_eeprom_t) - 256);
+
+	ret = i2c_get_chip_for_busnum(0, SPD_SPA0_ADDRESS, 1, &dev);
+	if (!ret)
+		dm_i2c_write(dev, 0, &dummy, 1);
+	ret = i2c_get_chip_for_busnum(0, i2c_address, 1, &dev);
+	if (!ret) {
+		if (!dm_i2c_read(dev, 0, (uchar *)spd, 256)) {
+			if (!i2c_get_chip_for_busnum(0, SPD_SPA1_ADDRESS,
+						     1, &dev))
+				dm_i2c_write(dev, 0, &dummy, 1);
+			if (!i2c_get_chip_for_busnum(0, i2c_address, 1, &dev))
+				ret = dm_i2c_read(dev, 0,
+						  (uchar *)((ulong)spd + 256),
+						  read_len);
+		}
+	}
+#endif
+
+#else
+
+#ifndef CONFIG_DM_I2C
 	ret = i2c_read(i2c_address, 0, 1, (uchar *)spd,
-				sizeof(generic_spd_eeprom_t));
+			sizeof(generic_spd_eeprom_t));
+#else
+	ret = i2c_get_chip_for_busnum(0, i2c_address, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_read(dev, 0, (uchar *)spd,
+				  sizeof(generic_spd_eeprom_t));
+#endif
+
 #endif
 
 	if (ret) {
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 23119cc..73b9807 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -558,6 +558,14 @@ static int i2c_read_data(struct mxc_i2c_bus *i2c_bus, uchar chip, uchar *buf,
 	return 0;
 }
 
+int __enable_i2c_clk(unsigned char enable, unsigned int i2c_num)
+{
+	return 1;
+}
+
+int enable_i2c_clk(unsigned char enable, unsigned int i2c_num)
+	__attribute__((weak, alias("__enable_i2c_clk")));
+
 #ifndef CONFIG_DM_I2C
 /*
  * Read data from I2C device
@@ -723,13 +731,6 @@ static int mxc_i2c_probe(struct i2c_adapter *adap, uint8_t chip)
 	return bus_i2c_write(i2c_get_base(adap), chip, 0, 0, NULL, 0);
 }
 
-int __enable_i2c_clk(unsigned char enable, unsigned i2c_num)
-{
-	return 1;
-}
-int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
-	__attribute__((weak, alias("__enable_i2c_clk")));
-
 void bus_i2c_init(int index, int speed, int unused,
 		  int (*idle_bus_fn)(void *p), void *idle_bus_data)
 {
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index 1d96e4b..c980ba4 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -282,6 +282,16 @@ static int mc_fixup_dpl_mac_addr(void *blob, int dpmac_id,
 				 MC_FIXUP_DPL);
 }
 
+void fdt_fixup_mc_ddr(u64 *base, u64 *size)
+{
+	u64 mc_size = mc_get_dram_block_size();
+
+	if (mc_size < MC_DRAM_BLOCK_DEFAULT_SIZE) {
+		*base = mc_get_dram_addr() + mc_size;
+		*size = MC_DRAM_BLOCK_DEFAULT_SIZE - mc_size;
+	}
+}
+
 void fdt_fsl_mc_fixup_iommu_map_entry(void *blob)
 {
 	u32 *prop;
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 860b73d..8778cc7 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -31,6 +31,12 @@ config TPL_DM_RTC
 	  drivers to perform the actual functions. See rtc.h for a
 	  description of the API.
 
+config RTC_ENABLE_32KHZ_OUTPUT
+	bool "Enable RTC 32Khz output"
+	help
+	   Some real-time clocks support the output of 32kHz square waves (such as ds3231),
+	   the config symbol choose Real Time Clock device 32Khz output feature.
+
 config RTC_PCF2127
 	bool "Enable PCF2127 driver"
 	depends on DM_RTC
diff --git a/drivers/rtc/ds3231.c b/drivers/rtc/ds3231.c
index 79b026a..fde4d86 100644
--- a/drivers/rtc/ds3231.c
+++ b/drivers/rtc/ds3231.c
@@ -148,11 +148,13 @@ void rtc_reset (void)
 /*
  * Enable 32KHz output
  */
+#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT
 void rtc_enable_32khz_output(void)
 {
 	rtc_write(RTC_STAT_REG_ADDR,
 		  RTC_STAT_BIT_BB32KHZ | RTC_STAT_BIT_EN32KHZ);
 }
+#endif
 
 /*
  * Helper functions
@@ -251,6 +253,21 @@ static int ds3231_probe(struct udevice *dev)
 	return 0;
 }
 
+#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT
+int rtc_enable_32khz_output(int busnum, int chip_addr)
+{
+	int ret;
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(busnum, chip_addr, 1, &dev);
+	if (!ret)
+		ret = dm_i2c_reg_write(dev, RTC_STAT_REG_ADDR,
+				       RTC_STAT_BIT_BB32KHZ |
+				       RTC_STAT_BIT_EN32KHZ);
+	return ret;
+}
+#endif
+
 static const struct rtc_ops ds3231_rtc_ops = {
 	.get = ds3231_rtc_get,
 	.set = ds3231_rtc_set,
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index a6c7c37..40fcd22 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -42,7 +42,9 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2048 * 1024)
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#endif
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX       1
diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index be018ef..b0e9441 100644
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -16,7 +16,6 @@
 #define CONFIG_DIMM_SLOTS_PER_CTLR		2
 
 #define CONFIG_QIXIS_I2C_ACCESS
-#define CONFIG_SYS_I2C_EARLY_INIT
 
 /*
  * QIXIS Definitions
diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
index 10791be..b77c36d 100644
--- a/include/configs/ls1028ardb.h
+++ b/include/configs/ls1028ardb.h
@@ -22,7 +22,6 @@
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_QIXIS_I2C_ACCESS
-#define CONFIG_SYS_I2C_EARLY_INIT
 
 /*
  * QIXIS Definitions
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 0e4e370..0ea3ca0 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -382,7 +382,6 @@ unsigned long get_board_ddr_clk(void);
 /* QSPI device */
 #if defined(CONFIG_TFABOOT) || \
 	(defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI))
-#define CONFIG_FSL_QSPI
 #ifdef CONFIG_FSL_QSPI
 #define CONFIG_SPI_FLASH_SPANSION
 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h
index 791bb8d..8609ebf 100644
--- a/include/configs/ls1046afrwy.h
+++ b/include/configs/ls1046afrwy.h
@@ -103,6 +103,9 @@
 #define CONFIG_ENV_SIZE			0x2000		/* 8KB */
 #define CONFIG_ENV_OFFSET		0x500000	/* 5MB */
 #define CONFIG_ENV_SECT_SIZE		0x40000		/* 256KB */
+#define CONFIG_SYS_FSL_QSPI_BASE	0x40000000
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FSL_QSPI_BASE + \
+					 CONFIG_ENV_OFFSET)
 
 /* FMan */
 #ifdef CONFIG_SYS_DPAA_FMAN
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index e8e1dc2..6f04dba 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -67,7 +67,10 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2048 * 1024)
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#endif
+
 
 /* Serial Port */
 #define CONFIG_SYS_NS16550_SERIAL
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 4387862..85e20617 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -17,6 +17,8 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_TFABOOT
 #define CONFIG_SYS_MMC_ENV_DEV		0
 
+#define CONFIG_MISC_INIT_R
+
 #define CONFIG_ENV_SIZE			0x20000
 #define CONFIG_ENV_OFFSET		0x500000
 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + \
@@ -46,7 +48,9 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_DDR_CLK_FREQ		100000000
 #else
 #define CONFIG_QIXIS_I2C_ACCESS
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C_EARLY_INIT
+#endif
 #define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
 #define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
 #endif
@@ -357,9 +361,7 @@ unsigned long get_board_ddr_clk(void);
 * RTC configuration
 */
 #define RTC
-#define CONFIG_RTC_PCF8563 1
 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
-#define CONFIG_CMD_DATE
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 322adb5..b71f704 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -269,9 +269,7 @@
 * RTC configuration
 */
 #define RTC
-#define CONFIG_RTC_PCF8563 1
 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
-#define CONFIG_CMD_DATE
 #endif
 
 /* EEPROM */
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index c7d8a3b..6be581a 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -75,7 +75,9 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2048 * 1024)
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#endif
 
 /* Serial Port */
 #define CONFIG_SYS_NS16550_SERIAL
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 18f30b5..e2a8975 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -16,7 +16,9 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_FSL_QSPI
 #define CONFIG_QIXIS_I2C_ACCESS
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C_EARLY_INIT
+#endif
 #define CONFIG_SYS_I2C_IFDR_DIV		0x7e
 #endif
 
@@ -324,7 +326,9 @@ unsigned long get_board_ddr_clk(void);
  */
 #define RTC
 #define CONFIG_RTC_DS3231               1
+#define CONFIG_RTC_ENABLE_32KHZ_OUTPUT
 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
+#define CONFIG_RTC_ENABLE_32KHZ_OUTPUT
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index bfb54be..2bf8217 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -13,8 +13,10 @@
 #ifdef CONFIG_TARGET_LS2081ARDB
 #define CONFIG_QIXIS_I2C_ACCESS
 #endif
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C_EARLY_INIT
 #endif
+#endif
 
 #define I2C_MUX_CH_VOL_MONITOR		0xa
 #define I2C_VOL_MONITOR_ADDR		0x38
diff --git a/include/fsl-mc/fsl_mc.h b/include/fsl-mc/fsl_mc.h
index 0abd797..a4d7d85 100644
--- a/include/fsl-mc/fsl_mc.h
+++ b/include/fsl-mc/fsl_mc.h
@@ -55,6 +55,7 @@ void fdt_fsl_mc_fixup_iommu_map_entry(void *blob);
 int get_mc_boot_status(void);
 int get_dpl_apply_status(void);
 int is_lazy_dpl_addr_valid(void);
+void fdt_fixup_mc_ddr(u64 *base, u64 *size);
 #ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
 int get_aiop_apply_status(void);
 #endif
diff --git a/include/rtc.h b/include/rtc.h
index b255bdc..7386d52 100644
--- a/include/rtc.h
+++ b/include/rtc.h
@@ -166,11 +166,17 @@ int rtc_read32(struct udevice *dev, unsigned int reg, u32 *valuep);
  */
 int rtc_write32(struct udevice *dev, unsigned int reg, u32 value);
 
+#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT
+int rtc_enable_32khz_output(int busnum, int chip_addr);
+#endif
+
 #else
 int rtc_get (struct rtc_time *);
 int rtc_set (struct rtc_time *);
 void rtc_reset (void);
+#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT
 void rtc_enable_32khz_output(void);
+#endif
 
 /**
  * rtc_read8() - Read an 8-bit register