arm: Remove mx35pdk board

This board has not been converted to CONFIG_DM_MMC by the deadline of
v2019.04, which is almost two years ago.  In addition there are other DM
migrations it is also missing.  Remove it.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefano Babic <sbabic@denx.de>

11 files changed, 1 insertions, 983 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 95557d6..8d6ff61 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -621,11 +621,6 @@ config TARGET_FLEA3
 	bool "Support flea3"
 	select CPU_ARM1136
 
-config TARGET_MX35PDK
-	bool "Support mx35pdk"
-	select BOARD_LATE_INIT
-	select CPU_ARM1136
-
 config ARCH_BCM283X
 	bool "Broadcom BCM283X family"
 	select DM
@@ -2015,7 +2010,6 @@ source "board/freescale/ls1012aqds/Kconfig"
 source "board/freescale/ls1012ardb/Kconfig"
 source "board/freescale/ls1012afrdm/Kconfig"
 source "board/freescale/lx2160a/Kconfig"
-source "board/freescale/mx35pdk/Kconfig"
 source "board/freescale/s32v234evb/Kconfig"
 source "board/grinn/chiliboard/Kconfig"
 source "board/hisilicon/hikey/Kconfig"
diff --git a/board/freescale/mx35pdk/Kconfig b/board/freescale/mx35pdk/Kconfig
deleted file mode 100644
index 021d19e..0000000
--- a/board/freescale/mx35pdk/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_MX35PDK
-
-config SYS_BOARD
-	default "mx35pdk"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_SOC
-	default "mx35"
-
-config SYS_CONFIG_NAME
-	default "mx35pdk"
-
-endif
diff --git a/board/freescale/mx35pdk/MAINTAINERS b/board/freescale/mx35pdk/MAINTAINERS
deleted file mode 100644
index 540e943..0000000
--- a/board/freescale/mx35pdk/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MX35PDK BOARD
-M:	Stefano Babic <sbabic@denx.de>
-S:	Maintained
-F:	board/freescale/mx35pdk/
-F:	include/configs/mx35pdk.h
-F:	configs/mx35pdk_defconfig
diff --git a/board/freescale/mx35pdk/Makefile b/board/freescale/mx35pdk/Makefile
deleted file mode 100644
index 6a60fad..0000000
--- a/board/freescale/mx35pdk/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
-#
-# (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
-
-obj-y	:= mx35pdk.o
-obj-y	+= lowlevel_init.o
diff --git a/board/freescale/mx35pdk/README b/board/freescale/mx35pdk/README
deleted file mode 100644
index 6f6841f..0000000
--- a/board/freescale/mx35pdk/README
+++ /dev/null
@@ -1,114 +0,0 @@
-Overview
---------------
-
-mx35pdk (known als as mx35_3stack) is a development board by Freescale.
-It consists of three pluggable board:
-	- CPU module, with CPU, RAM, flash
-	- Personality board, with most interfaces (USB, Network,..)
-	- Debug board with JTAG header.
-
-The board is usually delivered with redboot. This howto explains how to boot
-a linux kernel and how to replace the original bootloader with U-Boot.
-
-The board is delivered with Redboot on the NAND flash. It is possible to
-switch the boot device with the switches SW1-SW2 on the Personality board,
-and with SW5-SW10 on the Debug board.
-
-Delivered Redboot script to start the kernel
----------------------------------------------------
-
-In redboot the following script is stored:
-
-fis load kernel
-exec -c "noinitrd console=ttymxc0,115200 root=/dev/mtdblock8 rw rootfstype=jffs2 ip=dhcp fec_mac=00:04:9F:00:E7:76"
-
-Kernel is taken from flash. The image is in zImage format.
-
-Booting from NET, rootfs on NFS:
------------------------------------
-
-To change the script in redboot:
-
-load -r -b 0x100000 <path_to_zImage>
-exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nfsroot=192.168.1.1:/opt/eldk-4.2-arm/armVFP rw ip=dhcp"
-
-If the ip address is not set, you can set it with :
-
-ip_address -l <board_ip/netmask> -h <server_ip>
-
-Linux partitions:
----------------------------
-
-As default, the board is shipped with these partition tables for NAND
-and for NOR:
-
-Creating 5 MTD partitions on "NAND 2GiB 3,3V 8-bit":
-0x00000000-0x00100000 : "nand.bootloader"
-0x00100000-0x00600000 : "nand.kernel"
-0x00600000-0x06600000 : "nand.rootfs"
-0x06600000-0x06e00000 : "nand.configure"
-0x06e00000-0x80000000 : "nand.userfs"
-
-Creating 6 MTD partitions on "mxc_nor_flash.0":
-0x00000000-0x00080000 : "Bootloader"
-0x00080000-0x00480000 : "nor.Kernel"
-0x00480000-0x02280000 : "nor.userfs"
-0x02280000-0x03e80000 : "nor.rootfs"
-0x01fe0000-0x01fe3000 : "FIS directory"
-0x01fff000-0x04000000 : "Redboot config"
-
-NAND partitions can be recognized enabling in kernel CONFIG_MTD_REDBOOT_PARTS.
-For this board, CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK should be set to 2.
-
-However, the setup in redboot is not correct and does not use the whole flash.
-
-Better solution is to use the kernel parameter mtdparts.
-Here the resulting script to be defined in RedBoot with fconfig:
-
-load -r -b 0x100000 sbabic/mx35pdk/zImage.2.6.37
-exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nfsroot=192.168.1.1:/opt/eldk-4.2-arm/arm rw ip=dhcp mtdparts=mxc_nand:1m(boot),5m(linux),96m(root),8m(cfg),1938m(user);physmap-flash.0:512k(b),4m(k),30m(u),28m(r)"
-
-Flashing U-Boot
---------------------------------
-
-U-Boot should be stored on the NOR flash.
-
-The boot storage can be select using the switches on the personality board
-(SW1-SW2) and on the DEBUG board (SW4-SW10).
-
-If something goes wrong flashing the bootloader, it is always possible to
-recover the board booting from the other device.
-
-Saving U-Boot in the NOR flash
----------------------------------
-
-Check the partition for boot in the NOR flash. Setting the mtdparts as reported,
-the boot partition should be /dev/mtd0.
-
-Creating 6 MTD partitions on "mxc_nor_flash.0":
-0x00000000-0x00080000 : "Bootloader"
-0x00080000-0x00480000 : "nor.Kernel"
-0x00480000-0x02280000 : "nor.userfs"
-0x02280000-0x03e80000 : "nor.rootfs"
-0x01fe0000-0x01fe3000 : "FIS directory"
-0x01fff000-0x04000000 : "Redboot config"
-
-To erase the whole partition:
-$ flash_eraseall /dev/mtd0
-
-Writing U-Boot:
-dd if=u-boot.bin of=/dev/mtd0
-
-To boot from NOR, you have to select the switches as follows:
-
-Personality board
-	SW2	all off
-	SW1	all off
-
-Debug Board:
-	SW5	0
-	SW6	0
-	SW7	0
-	SW8	1
-	SW9	1
-	SW10	0
diff --git a/board/freescale/mx35pdk/lowlevel_init.S b/board/freescale/mx35pdk/lowlevel_init.S
deleted file mode 100644
index 5dae559..0000000
--- a/board/freescale/mx35pdk/lowlevel_init.S
+++ /dev/null
@@ -1,239 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- */
-
-#include <config.h>
-#include <asm/arch/imx-regs.h>
-#include <generated/asm-offsets.h>
-#include "mx35pdk.h"
-#include <asm/arch/lowlevel_macro.S>
-
-/*
- * return soc version
- * 	0x10:  TO1
- *	0x20:  TO2
- *	0x30:  TO3
- */
-.macro check_soc_version ret, tmp
-	ldr \tmp, =IIM_BASE_ADDR
-	ldr \ret, [\tmp, #IIM_SREV]
-	cmp \ret, #0x00
-	moveq \tmp, #ROMPATCH_REV
-	ldreq \ret, [\tmp]
-	moveq \ret, \ret, lsl #4
-	addne \ret, \ret, #0x10
-.endm
-
-/* CPLD on CS5 setup */
-.macro init_debug_board
-	ldr r0, =DBG_BASE_ADDR
-	ldr r1, =DBG_CSCR_U_CONFIG
-	str r1, [r0, #0x00]
-	ldr r1, =DBG_CSCR_L_CONFIG
-	str r1, [r0, #0x04]
-	ldr r1, =DBG_CSCR_A_CONFIG
-	str r1, [r0, #0x08]
-.endm
-
-/* clock setup */
-.macro init_clock
-	ldr r0, =CCM_BASE_ADDR
-
-	/* default CLKO to 1/32 of the ARM core*/
-	ldr r1, [r0, #CLKCTL_COSR]
-	bic r1, r1, #0x00000FF00
-	bic r1, r1, #0x0000000FF
-	mov r2, #0x00006C00
-	add r2, r2, #0x67
-	orr r1, r1, r2
-	str r1, [r0, #CLKCTL_COSR]
-
-	ldr r2, =CCM_CCMR_CONFIG
-	str r2, [r0, #CLKCTL_CCMR]
-
-	check_soc_version r1, r2
-	cmp r1, #CHIP_REV_2_0
-	ldrhs r3, =CCM_MPLL_532_HZ
-	bhs 1f
-	ldr r2, [r0, #CLKCTL_PDR0]
-	tst r2, #CLKMODE_CONSUMER
-	ldrne r3, =CCM_MPLL_532_HZ  /* consumer path*/
-	ldreq r3, =CCM_MPLL_399_HZ  /* auto path*/
-1:
-	str r3, [r0, #CLKCTL_MPCTL]
-
-	ldr r1, =CCM_PPLL_300_HZ
-	str r1, [r0, #CLKCTL_PPCTL]
-
-	ldr r1, =CCM_PDR0_CONFIG
-	bic r1, r1, #0x800000
-	str r1, [r0, #CLKCTL_PDR0]
-
-	ldr r1, [r0, #CLKCTL_CGR0]
-	orr r1, r1, #0x0C300000
-	str r1, [r0, #CLKCTL_CGR0]
-
-	ldr r1, [r0, #CLKCTL_CGR1]
-	orr r1, r1, #0x00000C00
-	orr r1, r1, #0x00000003
-	str r1, [r0, #CLKCTL_CGR1]
-
-	ldr r1, [r0, #CLKCTL_CGR2]
-	orr r1, r1, #0x00C00000
-	str r1, [r0, #CLKCTL_CGR2]
-.endm
-
-.macro setup_sdram
-	ldr r0, =ESDCTL_BASE_ADDR
-	mov r3, #0x2000
-	str r3, [r0, #0x0]
-	str r3, [r0, #0x8]
-
-	/*ip(r12) has used to save lr register in upper calling*/
-	mov fp, lr
-
-	mov r5, #0x00
-	mov r2, #0x00
-	mov r1, #CSD0_BASE_ADDR
-	bl setup_sdram_bank
-
-	mov r5, #0x00
-	mov r2, #0x00
-	mov r1, #CSD1_BASE_ADDR
-	bl setup_sdram_bank
-
-	mov lr, fp
-
-1:
-	ldr r3, =ESDCTL_DELAY_LINE5
-	str r3, [r0, #0x30]
-.endm
-
-.globl lowlevel_init
-lowlevel_init:
-	mov r10, lr
-
-	core_init
-
-	init_aips
-
-	init_max
-
-	init_m3if
-
-	init_clock
-	init_debug_board
-
-	cmp pc, #PHYS_SDRAM_1
-	blo init_sdram_start
-	cmp pc, #(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
-	blo skip_sdram_setup
-
-init_sdram_start:
-	/*init_sdram*/
-	setup_sdram
-
-skip_sdram_setup:
-	mov lr, r10
-	mov pc, lr
-
-
-/*
- * r0: ESDCTL control base, r1: sdram slot base
- * r2: DDR type(0:DDR2, 1:MDDR) r3, r4:working base
- */
-setup_sdram_bank:
-	mov r3, #0xE
-	tst r2, #0x1
-	orreq r3, r3, #0x300 /*DDR2*/
-	str r3, [r0, #0x10]
-	bic r3, r3, #0x00A
-	str r3, [r0, #0x10]
-	beq 2f
-
-	mov r3, #0x20000
-1:      subs r3, r3, #1
-	bne 1b
-
-2:      tst r2, #0x1
-	ldreq r3, =ESDCTL_DDR2_CONFIG
-	ldrne r3, =ESDCTL_MDDR_CONFIG
-	cmp r1, #CSD1_BASE_ADDR
-	strlo r3, [r0, #0x4]
-	strhs r3, [r0, #0xC]
-
-	ldr r3, =ESDCTL_0x92220000
-	strlo r3, [r0, #0x0]
-	strhs r3, [r0, #0x8]
-	mov r3, #0xDA
-	ldr r4, =ESDCTL_PRECHARGE
-	strb r3, [r1, r4]
-
-	tst r2, #0x1
-	bne skip_set_mode
-
-	cmp r1, #CSD1_BASE_ADDR
-	ldr r3, =ESDCTL_0xB2220000
-	strlo r3, [r0, #0x0]
-	strhs r3, [r0, #0x8]
-	mov r3, #0xDA
-	ldr r4, =ESDCTL_DDR2_EMR2
-	strb r3, [r1, r4]
-	ldr r4, =ESDCTL_DDR2_EMR3
-	strb r3, [r1, r4]
-	ldr r4, =ESDCTL_DDR2_EN_DLL
-	strb r3, [r1, r4]
-	ldr r4, =ESDCTL_DDR2_RESET_DLL
-	strb r3, [r1, r4]
-
-	ldr r3, =ESDCTL_0x92220000
-	strlo r3, [r0, #0x0]
-	strhs r3, [r0, #0x8]
-	mov r3, #0xDA
-	ldr r4, =ESDCTL_PRECHARGE
-	strb r3, [r1, r4]
-
-skip_set_mode:
-	cmp r1, #CSD1_BASE_ADDR
-	ldr r3, =ESDCTL_0xA2220000
-	strlo r3, [r0, #0x0]
-	strhs r3, [r0, #0x8]
-	mov r3, #0xDA
-	strb r3, [r1]
-	strb r3, [r1]
-
-	ldr r3, =ESDCTL_0xB2220000
-	strlo r3, [r0, #0x0]
-	strhs r3, [r0, #0x8]
-	tst r2, #0x1
-	ldreq r4, =ESDCTL_DDR2_MR
-	ldrne r4, =ESDCTL_MDDR_MR
-	mov r3, #0xDA
-	strb r3, [r1, r4]
-	ldreq r4, =ESDCTL_DDR2_OCD_DEFAULT
-	streqb r3, [r1, r4]
-	ldreq r4, =ESDCTL_DDR2_EN_DLL
-	ldrne r4, =ESDCTL_MDDR_EMR
-	strb r3, [r1, r4]
-
-	cmp r1, #CSD1_BASE_ADDR
-	ldr r3, =ESDCTL_0x82228080
-	strlo r3, [r0, #0x0]
-	strhs r3, [r0, #0x8]
-
-	tst r2, #0x1
-	moveq r4, #0x20000
-	movne r4, #0x200
-1:      subs r4, r4, #1
-	bne 1b
-
-	str r3, [r1, #0x100]
-	ldr r4, [r1, #0x100]
-	cmp r3, r4
-	movne r3, #1
-	moveq r3, #0
-
-	mov pc, lr
diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
deleted file mode 100644
index fc024c4..0000000
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ /dev/null
@@ -1,293 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/iomux-mx35.h>
-#include <i2c.h>
-#include <power/pmic.h>
-#include <fsl_pmic.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
-#include <mc9sdz60.h>
-#include <mc13892.h>
-#include <linux/types.h>
-#include <asm/gpio.h>
-#include <asm/arch/sys_proto.h>
-#include <netdev.h>
-#include <asm/mach-types.h>
-
-#ifndef CONFIG_BOARD_LATE_INIT
-#error "CONFIG_BOARD_LATE_INIT must be set for this board"
-#endif
-
-#ifndef CONFIG_BOARD_EARLY_INIT_F
-#error "CONFIG_BOARD_EARLY_INIT_F must be set for this board"
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
-	u32 size1, size2;
-
-	size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
-	size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
-
-	gd->ram_size = size1 + size2;
-
-	return 0;
-}
-
-int dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-
-	return 0;
-}
-
-#define I2C_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE)
-
-static void setup_iomux_i2c(void)
-{
-	static const iomux_v3_cfg_t i2c1_pads[] = {
-		NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL),
-		NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL),
-	};
-
-	/* setup pins for I2C1 */
-	imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads));
-}
-
-
-static void setup_iomux_spi(void)
-{
-	static const iomux_v3_cfg_t spi_pads[] = {
-		MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
-		MX35_PAD_CSPI1_MISO__CSPI1_MISO,
-		MX35_PAD_CSPI1_SS0__CSPI1_SS0,
-		MX35_PAD_CSPI1_SS1__CSPI1_SS1,
-		MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
-	};
-
-	imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
-}
-
-#define USBOTG_IN_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | \
-				 PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW)
-#define USBOTG_OUT_PAD_CTRL	(PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW)
-
-static void setup_iomux_usbotg(void)
-{
-	static const iomux_v3_cfg_t usbotg_pads[] = {
-		NEW_PAD_CTRL(MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
-				USBOTG_OUT_PAD_CTRL),
-		NEW_PAD_CTRL(MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
-				USBOTG_IN_PAD_CTRL),
-	};
-
-	/* Set up pins for USBOTG. */
-	imx_iomux_v3_setup_multiple_pads(usbotg_pads, ARRAY_SIZE(usbotg_pads));
-}
-
-#define FEC_PAD_CTRL	(PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW)
-
-static void setup_iomux_fec(void)
-{
-	static const iomux_v3_cfg_t fec_pads[] = {
-		NEW_PAD_CTRL(MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, FEC_PAD_CTRL |
-					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
-		NEW_PAD_CTRL(MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, FEC_PAD_CTRL |
-					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
-		NEW_PAD_CTRL(MX35_PAD_FEC_RX_DV__FEC_RX_DV, FEC_PAD_CTRL |
-					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
-		NEW_PAD_CTRL(MX35_PAD_FEC_COL__FEC_COL, FEC_PAD_CTRL |
-					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
-		NEW_PAD_CTRL(MX35_PAD_FEC_RDATA0__FEC_RDATA_0, FEC_PAD_CTRL |
-					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
-		NEW_PAD_CTRL(MX35_PAD_FEC_TDATA0__FEC_TDATA_0, FEC_PAD_CTRL),
-		NEW_PAD_CTRL(MX35_PAD_FEC_TX_EN__FEC_TX_EN, FEC_PAD_CTRL),
-		NEW_PAD_CTRL(MX35_PAD_FEC_MDC__FEC_MDC, FEC_PAD_CTRL),
-		NEW_PAD_CTRL(MX35_PAD_FEC_MDIO__FEC_MDIO, FEC_PAD_CTRL |
-					PAD_CTL_HYS | PAD_CTL_PUS_22K_UP),
-		NEW_PAD_CTRL(MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, FEC_PAD_CTRL),
-		NEW_PAD_CTRL(MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, FEC_PAD_CTRL |
-					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
-		NEW_PAD_CTRL(MX35_PAD_FEC_CRS__FEC_CRS, FEC_PAD_CTRL |
-					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
-		NEW_PAD_CTRL(MX35_PAD_FEC_RDATA1__FEC_RDATA_1, FEC_PAD_CTRL |
-					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
-		NEW_PAD_CTRL(MX35_PAD_FEC_TDATA1__FEC_TDATA_1, FEC_PAD_CTRL),
-		NEW_PAD_CTRL(MX35_PAD_FEC_RDATA2__FEC_RDATA_2, FEC_PAD_CTRL |
-					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
-		NEW_PAD_CTRL(MX35_PAD_FEC_TDATA2__FEC_TDATA_2, FEC_PAD_CTRL),
-		NEW_PAD_CTRL(MX35_PAD_FEC_RDATA3__FEC_RDATA_3, FEC_PAD_CTRL |
-					PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
-		NEW_PAD_CTRL(MX35_PAD_FEC_TDATA3__FEC_TDATA_3, FEC_PAD_CTRL),
-	};
-
-	/* setup pins for FEC */
-	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
-}
-
-int board_early_init_f(void)
-{
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-
-	/* enable clocks */
-	writel(readl(&ccm->cgr0) |
-		MXC_CCM_CGR0_EMI_MASK |
-		MXC_CCM_CGR0_EDIO_MASK |
-		MXC_CCM_CGR0_EPIT1_MASK,
-		&ccm->cgr0);
-
-	writel(readl(&ccm->cgr1) |
-		MXC_CCM_CGR1_FEC_MASK |
-		MXC_CCM_CGR1_GPIO1_MASK |
-		MXC_CCM_CGR1_GPIO2_MASK |
-		MXC_CCM_CGR1_GPIO3_MASK |
-		MXC_CCM_CGR1_I2C1_MASK |
-		MXC_CCM_CGR1_I2C2_MASK |
-		MXC_CCM_CGR1_IPU_MASK,
-		&ccm->cgr1);
-
-	/* Setup NAND */
-	__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
-
-	setup_iomux_i2c();
-	setup_iomux_usbotg();
-	setup_iomux_fec();
-	setup_iomux_spi();
-
-	return 0;
-}
-
-int board_init(void)
-{
-	gd->bd->bi_arch_number = MACH_TYPE_MX35_3DS;	/* board id for linux */
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	return 0;
-}
-
-static inline int pmic_detect(void)
-{
-	unsigned int id;
-	struct pmic *p = pmic_get("FSL_PMIC");
-	if (!p)
-		return -ENODEV;
-
-	pmic_reg_read(p, REG_IDENTIFICATION, &id);
-
-	id = (id >> 6) & 0x7;
-	if (id == 0x7)
-		return 1;
-	return 0;
-}
-
-u32 get_board_rev(void)
-{
-	int rev;
-
-	rev = pmic_detect();
-
-	return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
-}
-
-int board_late_init(void)
-{
-	u8 val;
-	u32 pmic_val;
-	struct pmic *p;
-	int ret;
-
-	ret = pmic_init(I2C_0);
-	if (ret)
-		return ret;
-
-	if (pmic_detect()) {
-		p = pmic_get("FSL_PMIC");
-		imx_iomux_v3_setup_pad(MX35_PAD_WDOG_RST__WDOG_WDOG_B);
-
-		pmic_reg_read(p, REG_SETTING_0, &pmic_val);
-		pmic_reg_write(p, REG_SETTING_0,
-			pmic_val | VO_1_30V | VO_1_50V);
-		pmic_reg_read(p, REG_MODE_0, &pmic_val);
-		pmic_reg_write(p, REG_MODE_0, pmic_val | VGEN3EN);
-
-		imx_iomux_v3_setup_pad(MX35_PAD_COMPARE__GPIO1_5);
-
-		gpio_direction_output(IMX_GPIO_NR(1, 5), 1);
-	}
-
-	val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04;
-	mc9sdz60_reg_write(MC9SDZ60_REG_GPIO_1, val);
-	mdelay(200);
-
-	val = mc9sdz60_reg_read(MC9SDZ60_REG_RESET_1) & 0x7F;
-	mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val);
-	mdelay(200);
-
-	val |= 0x80;
-	mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val);
-
-	/* Print board revision */
-	printf("Board: MX35 PDK %d.0\n", ((get_board_rev() >> 8) + 1) & 0x0F);
-
-	return 0;
-}
-
-int board_eth_init(struct bd_info *bis)
-{
-#if defined(CONFIG_SMC911X)
-	int rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-	if (rc)
-		return rc;
-#endif
-	return cpu_eth_init(bis);
-}
-
-#if defined(CONFIG_FSL_ESDHC_IMX)
-
-struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR};
-
-int board_mmc_init(struct bd_info *bis)
-{
-	static const iomux_v3_cfg_t sdhc1_pads[] = {
-		MX35_PAD_SD1_CMD__ESDHC1_CMD,
-		MX35_PAD_SD1_CLK__ESDHC1_CLK,
-		MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-		MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-		MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-		MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	};
-
-	/* configure pins for SDHC1 only */
-	imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
-
-	esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
-	return fsl_esdhc_initialize(bis, &esdhc_cfg);
-}
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	return !(mc9sdz60_reg_read(MC9SDZ60_REG_DES_FLAG) & 0x4);
-}
-#endif
diff --git a/board/freescale/mx35pdk/mx35pdk.h b/board/freescale/mx35pdk/mx35pdk.h
deleted file mode 100644
index 0af4b88..0000000
--- a/board/freescale/mx35pdk/mx35pdk.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
- */
-
-#ifndef __BOARD_MX35_3STACK_H
-#define __BOARD_MX35_3STACK_H
-
-#define DBG_BASE_ADDR		WEIM_CTRL_CS5
-#define DBG_CSCR_U_CONFIG	0x0000D843
-#define DBG_CSCR_L_CONFIG	0x22252521
-#define DBG_CSCR_A_CONFIG	0x22220A00
-
-#define CCM_CCMR_CONFIG		0x003F4208
-#define CCM_PDR0_CONFIG		0x00801000
-
-/* MEMORY SETTING */
-#define ESDCTL_0x92220000	0x92220000
-#define ESDCTL_0xA2220000	0xA2220000
-#define ESDCTL_0xB2220000	0xB2220000
-#define ESDCTL_0x82228080	0x82228080
-
-#define ESDCTL_PRECHARGE	0x00000400
-
-#define ESDCTL_MDDR_CONFIG	0x007FFC3F
-#define ESDCTL_MDDR_MR		0x00000033
-#define ESDCTL_MDDR_EMR		0x02000000
-
-#define ESDCTL_DDR2_CONFIG	0x007FFC3F
-#define ESDCTL_DDR2_EMR2	0x04000000
-#define ESDCTL_DDR2_EMR3	0x06000000
-#define ESDCTL_DDR2_EN_DLL	0x02000400
-#define ESDCTL_DDR2_RESET_DLL	0x00000333
-#define ESDCTL_DDR2_MR		0x00000233
-#define ESDCTL_DDR2_OCD_DEFAULT 0x02000780
-
-#define ESDCTL_DELAY_LINE5	0x00F49F00
-#endif				/* __BOARD_MX35_3STACK_H */
diff --git a/configs/mx35pdk_defconfig b/configs/mx35pdk_defconfig
deleted file mode 100644
index ab77fb5..0000000
--- a/configs/mx35pdk_defconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_MX35PDK=y
-CONFIG_SYS_TEXT_BASE=0xA0000000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_SECT_SIZE=0x20000
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand,nor0=physmap-flash.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:1m(boot),5m(linux),96m(root),8m(cfg),1938m(user);physmap-flash.0:512k(b),4m(k),30m(u),28m(r)"
-CONFIG_EFI_PARTITION=y
-# CONFIG_PARTITION_UUIDS is not set
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xA0080000
-CONFIG_ENV_ADDR_REDUND=0xA00A0000
-CONFIG_MXC_GPIO=y
-CONFIG_FSL_ESDHC_IMX=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXC=y
-CONFIG_MII=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0xB6000000
-CONFIG_MXC_UART=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 9db4cae..79ad0a1 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -635,7 +635,7 @@ config MCFUART
 
 config MXC_UART
 	bool "IMX serial port support"
-	depends on ARCH_MX25 || ARCH_MX31 || TARGET_APF27 || TARGET_FLEA3 || TARGET_MX35PDK \
+	depends on ARCH_MX25 || ARCH_MX31 || TARGET_APF27 || TARGET_FLEA3 \
 		|| MX5 || MX6 || MX7 || IMX8M
 	help
 	  If you have a machine based on a Motorola IMX CPU you
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
deleted file mode 100644
index d2dcc81..0000000
--- a/include/configs/mx35pdk.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010, Stefano Babic <sbabic@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * Configuration for the MX35pdk Freescale board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-
- /* High Level Configuration Options */
-#define CONFIG_MX35
-
-#define CONFIG_SYS_FSL_CLK
-
-/* Set TEXT at the beginning of the NOR flash */
-
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-
-/*
- * PMIC Configs
- */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_FSL
-#define CONFIG_POWER_FSL_MC13892
-#define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x08
-#define CONFIG_RTC_MC13XXX
-
-/*
- * MFD MC9SDZ60
- */
-#define CONFIG_FSL_MC9SDZ60
-#define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR	0x69
-
-/*
- * UART (console)
- */
-#define CONFIG_MXC_UART_BASE	UART1_BASE
-
-/*
- * Command definition
- */
-
-#define CONFIG_NET_RETRY_COUNT	100
-
-
-#define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */
-
-/*
- * Ethernet on the debug board (SMC911)
- */
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETHPRIME
-
-/*
- * Ethernet on SOC (FEC)
- */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE	FEC_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR	0x1F
-
-#define CONFIG_ARP_TIMEOUT	200UL
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-
-/*
- * Physical Memory Map
- */
-#define PHYS_SDRAM_1		CSD0_BASE_ADDR
-#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
-#define PHYS_SDRAM_2		CSD1_BASE_ADDR
-#define PHYS_SDRAM_2_SIZE	(128 * 1024 * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE		CSD0_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR + 0x10000)
-#define CONFIG_SYS_INIT_RAM_SIZE		(IRAM_SIZE / 2)
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					CONFIG_SYS_GBL_DATA_OFFSET)
-
-/*
- * MTD Command for mtdparts
- */
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_BASE		CS0_BASE_ADDR
-#define CONFIG_SYS_MAX_FLASH_BANKS 1	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512	/* max number of sectors on one chip */
-/* Monitor at beginning of flash */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-
-/* Address and size of Redundant Environment Sector	*/
-
-/*
- * CFI FLASH driver setup
- */
-
-/* A non-standard buffered write algorithm */
-#define CONFIG_FLASH_SPANSION_S29WS_N
-
-/*
- * NAND FLASH driver setup
- */
-#define CONFIG_MXC_NAND_REGS_BASE	(NFC_BASE_ADDR)
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		(NFC_BASE_ADDR)
-#define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_NAND_LARGEPAGE
-
-/* EHCI driver */
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_EHCI_MXC
-#define CONFIG_MXC_USB_PORT	0
-#define CONFIG_MXC_USB_FLAGS	(MXC_EHCI_INTERFACE_DIFF_UNI | \
-				 MXC_EHCI_POWER_PINS_ENABLED | \
-				 MXC_EHCI_OC_PIN_ACTIVE_LOW)
-#define CONFIG_MXC_USB_PORTSC	(MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
-
-/* mmc driver */
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#define CONFIG_SYS_FSL_ESDHC_NUM	1
-
-/*
- * Default environment and default scripts
- * to update uboot and load kernel
- */
-
-#define CONFIG_HOSTNAME "mx35pdk"
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth1\0"							\
-	"ethprime=smc911x\0"						\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip_sta=setenv bootargs ${bootargs} "			\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
-	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
-		"else run addip_sta;fi\0"				\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"addtty=setenv bootargs ${bootargs}"				\
-		" console=ttymxc0,${baudrate}\0"			\
-	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
-	"loadaddr=80800000\0"						\
-	"kernel_addr_r=80800000\0"					\
-	"hostname=" CONFIG_HOSTNAME "\0"			\
-	"bootfile=" CONFIG_HOSTNAME "/uImage\0"		\
-	"ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0"	\
-	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr}\0"				\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
-		"run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr_r}\0"				\
-	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
-		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
-	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"		\
-	"load=tftp ${loadaddr} ${u-boot}\0"				\
-	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"		\
-	"update=protect off ${uboot_addr} +80000;"			\
-		"erase ${uboot_addr} +80000;"				\
-		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
-	"upd=if run load;then echo Updating u-boot;if run update;"	\
-		"then echo U-Boot updated;"				\
-			"else echo Error updating u-boot !;"		\
-			"echo Board without bootloader !!;"		\
-		"fi;"							\
-		"else echo U-Boot not downloaded..exiting;fi\0"		\
-	"bootcmd=run net_nfs\0"
-
-#endif				/* __CONFIG_H */