[PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed

            - now the Flash ST M29W040B is supported (not tested)
            - fix the "led" command
            - fix compile error, if BUILD_DIR is used

Signed-off-by: Heiko Schocher <hs@denx.de>

5 files changed, 101 insertions, 14 deletions

diff --git a/Makefile b/Makefile
index 47e4e67..c45700e 100644
--- a/Makefile
+++ b/Makefile
@@ -268,7 +268,7 @@ $(obj)u-boot.img:	$(obj)u-boot.bin
 		-d $< $@
 
 $(obj)u-boot.sha1:	$(obj)u-boot.bin
-		./tools/ubsha1 $(obj)u-boot.bin
+		$(obj)./tools/ubsha1 $(obj)u-boot.bin
 
 $(obj)u-boot.dis:	$(obj)u-boot
 		$(OBJDUMP) -d $< > $@
diff --git a/board/pcs440ep/flash.c b/board/pcs440ep/flash.c
index 7001440..c5a62e2 100644
--- a/board/pcs440ep/flash.c
+++ b/board/pcs440ep/flash.c
@@ -82,6 +82,7 @@ void flash_print_info(flash_info_t *info)
 	case FLASH_MAN_AMD:	printf ("AMD ");		break;
 	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
 	case FLASH_MAN_SST:	printf ("SST ");		break;
+	case FLASH_MAN_STM:	printf ("ST Micro");		break;
 	case FLASH_MAN_EXCEL:	printf ("Excel Semiconductor "); break;
 	case FLASH_MAN_MX:	printf ("MXIC "); break;
 	default:		printf ("Unknown Vendor ");	break;
@@ -118,6 +119,8 @@ void flash_print_info(flash_info_t *info)
 		break;
 	case FLASH_SST040:	printf ("SST39LF/VF040 (4 Mbit, uniform sector size)\n");
 		break;
+	case STM_ID_M29W040B:	printf ("ST Micro M29W040B (4 Mbit, uniform sector size)\n");
+		break;
 	default:		printf ("Unknown Chip Type\n");
 		break;
 	}
@@ -193,6 +196,9 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
 	case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
 		info->flash_id = FLASH_MAN_SST;
 		break;
+	case (CFG_FLASH_WORD_SIZE)STM_MANUFACT:
+		info->flash_id = FLASH_MAN_STM;
+		break;
 	case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
 		info->flash_id = FLASH_MAN_EXCEL;
 		break;
@@ -226,6 +232,11 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
 		info->sector_count = 8;
 		info->size = 0x0080000;		/* => 0.5 MB	*/
 		break;
+	case (CFG_FLASH_WORD_SIZE)STM_ID_M29W040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x0080000; /* => 0,5 MB */
+		break;
 
 	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800T:
 		info->flash_id += FLASH_AM800T;
diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c
index ada6b82..0e34a76 100644
--- a/board/pcs440ep/pcs440ep.c
+++ b/board/pcs440ep/pcs440ep.c
@@ -85,8 +85,9 @@ static void status_led_blink (void)
 
 	/* set all LED which are on, to state BLINKING */
 	for (i = 0; i < 4; i++) {
-		if (val & 0x08) status_led_set (i, STATUS_LED_BLINKING);
-		val = val << 1;
+		if (val & 0x01) status_led_set (3 - i, STATUS_LED_BLINKING);
+		else status_led_set (3 - i, STATUS_LED_OFF);
+		val = val >> 1;
 	}
 }
 
@@ -113,12 +114,14 @@ void show_boot_progress (int val)
 			status_led_set (1, STATUS_LED_ON);
 			status_led_set (2, STATUS_LED_ON);
 			break;
+#if 0
 		case 64:
 			/* starting Ethernet configuration */
 			status_led_set (0, STATUS_LED_OFF);
 			status_led_set (1, STATUS_LED_OFF);
 			status_led_set (2, STATUS_LED_ON);
 			break;
+#endif
 		case 80:
 			/* loading Image */
 			status_led_set (0, STATUS_LED_ON);
@@ -404,6 +407,9 @@ static void pcs440ep_checksha1 (void)
 	int	ret;
 	char	*cs_test;
 
+	status_led_set (0, STATUS_LED_OFF);
+	status_led_set (1, STATUS_LED_OFF);
+	status_led_set (2, STATUS_LED_ON);
 	ret = pcs440ep_sha1 (1);
 	if (ret == 0) return;
 
@@ -751,28 +757,41 @@ void hw_watchdog_reset(void)
  ************************************************************************/
 int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	int	rcode = 0;
+	int	rcode = 0, i;
 	ulong	pattern = 0;
 
-	pattern = simple_strtoul (argv[1], NULL, 10);
-	if (pattern > 200) {
+	pattern = simple_strtoul (argv[1], NULL, 16);
+	if (pattern > 0x400) {
+		int	val = GET_LEDS;
+		printf ("led: %x\n", val);
+		return rcode;
+	}
+	if (pattern > 0x200) {
 		status_led_blink ();
 		hang ();
 		return rcode;
 	}
-	if (pattern > 100) {
+	if (pattern > 0x100) {
 		status_led_blink ();
 		return rcode;
 	}
 	pattern &= 0x0f;
-	set_leds (pattern);
+	for (i = 0; i < 4; i++) {
+		if (pattern & 0x01) status_led_set (i, STATUS_LED_ON);
+		else status_led_set (i, STATUS_LED_OFF);
+		pattern = pattern >> 1;
+	}
 	return rcode;
 }
 
 U_BOOT_CMD(
  	led,	2,	1,	do_led,
- 	"led    - set the led\n",
-	NULL
+ 	"led [bitmask]   - set the DIAG-LED\n",
+	"[bitmask] 0x01 = DIAG 1 on\n"
+	"              0x02 = DIAG 2 on\n"
+	"              0x04 = DIAG 3 on\n"
+	"              0x08 = DIAG 4 on\n"
+	"              > 0x100 set the LED, who are on, to state blinking\n"
 );
 
 #if defined(CONFIG_SHA1_CHECK_UB_IMG)
diff --git a/doc/README.sha1 b/doc/README.sha1
new file mode 100644
index 0000000..92dc8ff
--- /dev/null
+++ b/doc/README.sha1
@@ -0,0 +1,57 @@
+SHA1 usage:
+-----------
+
+In the U-Boot Image for the pcs440ep board is a SHA1 checksum integrated.
+This SHA1 sum is used, to check, if the U-Boot Image in Flash is not
+corrupted.
+
+The following command is available:
+
+=> help sha1
+sha1 address len [addr]  calculate the SHA1 sum [save at addr]
+     -p calculate the SHA1 sum from the U-Boot image in flash and print
+     -c check the U-Boot image in flash
+
+"sha1 -p"
+	calculates and prints the SHA1 sum, from the Image stored in Flash
+
+"sha1 -c"
+	check, if the SHA1 sum from the Image stored in Flash is correct
+
+
+It is possible to calculate a SHA1 checksum from a memoryrange with:
+
+"sha1 address len"
+
+If you want to store a new Image in Flash for the pcs440ep board,
+which has no SHA1 sum, you can do the following:
+
+a) cp the new Image on a position in RAM (here 0x300000)
+   (for this example we use the Image from Flash, stored at 0xfffa0000 and
+    0x60000 Bytes long)
+
+"cp.b fffa0000 300000 60000"
+
+b) Initialize the SHA1 sum in the Image with 0x00
+   The SHA1 sum is stored in Flash at:
+                           CFG_MONITOR_BASE + CFG_MONITOR_LEN + SHA1_SUM_POS
+   for the pcs440ep Flash:       0xfffa0000 +         0x60000 +        -0x20
+                            = 0xffffffe0
+   for the example in RAM:         0x300000 +         0x60000 +        -0x20
+                            = 0x35ffe0
+
+   note: a SHA1 checksum is 20 bytes long.
+
+"mw.b 35ffe0 0 14"
+
+c) now calculate the SHA1 sum from the memoryrange and write
+   the calculated checksum at the right place:
+
+"sha1 300000 60000 35ffe0"
+
+Now you have a U-Boot-Image for the pcs440ep board with the correct SHA1 sum.
+
+If you do a "./MAKEALL pcs440ep" or a "make all" to get the U-Boot image,
+the correct SHA1 sum will be automagically included in the U-Boot image.
+
+Heiko Schocher, 11 Jul 2007
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 69d97d6..5ee97c1 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -197,16 +197,16 @@
 #define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
 #define CONFIG_BOARD_SPECIFIC_LED	1
 
-#define STATUS_LED_BIT		0x08			/* LED 1 is on GPIO_PPC_1 */
+#define STATUS_LED_BIT		0x08			/* DIAG1 is on GPIO_PPC_1 */
 #define STATUS_LED_PERIOD	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
 #define STATUS_LED_STATE	STATUS_LED_OFF
-#define STATUS_LED_BIT1		0x04			/* LED 2 is on GPIO_PPC_2 */
+#define STATUS_LED_BIT1		0x04			/* DIAG2 is on GPIO_PPC_2 */
 #define STATUS_LED_PERIOD1	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
 #define STATUS_LED_STATE1	STATUS_LED_ON
-#define STATUS_LED_BIT2		0x02			/* LED 3 is on GPIO_PPC_3 */
+#define STATUS_LED_BIT2		0x02			/* DIAG3 is on GPIO_PPC_3 */
 #define STATUS_LED_PERIOD2	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
 #define STATUS_LED_STATE2	STATUS_LED_OFF
-#define STATUS_LED_BIT3		0x01			/* LED 4 is on GPIO_PPC_4 */
+#define STATUS_LED_BIT3		0x01			/* DIAG4 is on GPIO_PPC_4 */
 #define STATUS_LED_PERIOD3	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
 #define STATUS_LED_STATE3	STATUS_LED_OFF