arm: Remove warp board

This board is missing migration to CONFIG_DM, which had a deadline of
v2020.01, which is now more than 2 years passed due.  Remove it.

Cc: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Tom Rini <trini@konsulko.com>

9 files changed, 0 insertions, 608 deletions

diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index eceb730..ec560fe 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -640,11 +640,6 @@ config TARGET_WANDBOARD
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 
-config TARGET_WARP
-	bool "WaRP"
-	depends on MX6SL
-	select BOARD_LATE_INIT
-
 config TARGET_BRPPT2
 	bool "brppt2"
 	depends on MX6QDL
@@ -724,7 +719,6 @@ source "board/k+p/kp_imx6q_tpc/Kconfig"
 source "board/udoo/Kconfig"
 source "board/udoo/neo/Kconfig"
 source "board/wandboard/Kconfig"
-source "board/warp/Kconfig"
 source "board/BuR/brppt2/Kconfig"
 source "board/out4/o4-imx6ull-nano/Kconfig"
 
diff --git a/board/warp/Kconfig b/board/warp/Kconfig
deleted file mode 100644
index 9c2fc9d..0000000
--- a/board/warp/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_WARP
-
-config SYS_BOARD
-	default "warp"
-
-config SYS_CONFIG_NAME
-	default "warp"
-
-config IMX_CONFIG
-	default "board/warp/imximage.cfg"
-
-endif
diff --git a/board/warp/MAINTAINERS b/board/warp/MAINTAINERS
deleted file mode 100644
index ee2114d..0000000
--- a/board/warp/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-WaRP BOARD
-M:	Otavio Salvador <otavio@ossystems.com.br>
-S:	Maintained
-F:	board/warp/
-F:	include/configs/warp.h
-F:	configs/warp_defconfig
diff --git a/board/warp/Makefile b/board/warp/Makefile
deleted file mode 100644
index 3a2373d..0000000
--- a/board/warp/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-# Copyright (C) 2014 O.S. Systems Software LTDA.
-# Copyright (C) 2014 Kynetics LLC.
-# Copyright (C) 2014 Revolution Robotics, Inc.
-
-obj-y  := warp.o
diff --git a/board/warp/README b/board/warp/README
deleted file mode 100644
index 3cfd22e..0000000
--- a/board/warp/README
+++ /dev/null
@@ -1,56 +0,0 @@
-How to Update U-Boot on Warp board
-----------------------------------
-
-Required software on the host PC:
-
-- imx_usb_loader: https://github.com/boundarydevices/imx_usb_loader
-
-- dfu-util: http://dfu-util.sourceforge.net/releases/
-
-Build U-Boot for Warp:
-
-$ make mrproper
-$ make warp_config
-$ make
-
-This will generate the U-Boot binary called u-boot.imx.
-
-Put warp board in USB download mode
-
-Connect a USB to serial adapter between the host PC and warp
-
-Connect a USB cable between the OTG warp port and the host PC
-
-Open a terminal program such as minicom
-
-Copy u-boot.imx to the imx_usb_loader folder.
-
-Load u-boot.imx via USB:
-
-$ sudo ./imx_usb u-boot.imx
-
-Then U-Boot should start and its messages will appear in the console program.
-
-Use the default environment variables:
-
-=> env default -f -a
-=> saveenv
-
-Run the DFU command:
-=> dfu 0 mmc 0
-
-Transfer u-boot.imx that will be flashed into the eMMC:
-
-$ sudo dfu-util -D u-boot.imx -a boot
-
-Then on the U-Boot prompt the following message should be seen after a
-successful upgrade:
-
-#DOWNLOAD ... OK
-Ctrl+C to exit ...
-
-Remove power from the warp board.
-
-Put warp board into normal boot mode
-
-Power up the board and the new updated U-Boot should boot from eMMC
diff --git a/board/warp/imximage.cfg b/board/warp/imximage.cfg
deleted file mode 100644
index f6bc604..0000000
--- a/board/warp/imximage.cfg
+++ /dev/null
@@ -1,122 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * Refer doc/imx/mkimage/imximage.txt for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-#include <config.h>
-
-/* image version */
-
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
- */
-
-BOOT_FROM	sd
-
-/*
- * Secure boot support
- */
-#ifdef CONFIG_IMX_HAB
-CSF CONFIG_CSF_SIZE
-#endif
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type           Address        Value
- *
- * where:
- *	Addr-type register length (1,2 or 4 bytes)
- *	Address	  absolute address of the register
- *	value	  value to be stored in the register
- */
-DATA 4 0x020c4018 0x00260324
-
-DATA 4 0x020c4068 0xffffffff
-DATA 4 0x020c406c 0xffffffff
-DATA 4 0x020c4070 0xffffffff
-DATA 4 0x020c4074 0xffffffff
-DATA 4 0x020c4078 0xffffffff
-DATA 4 0x020c407c 0xffffffff
-DATA 4 0x020c4080 0xffffffff
-
-DATA 4 0x020e0344 0x00003030
-DATA 4 0x020e0348 0x00003030
-DATA 4 0x020e034c 0x00003030
-DATA 4 0x020e0350 0x00003030
-DATA 4 0x020e030c 0x00000030
-DATA 4 0x020e0310 0x00000030
-DATA 4 0x020e0314 0x00000030
-DATA 4 0x020e0318 0x00000030
-DATA 4 0x020e0300 0x00000030
-DATA 4 0x020e031c 0x00000030
-DATA 4 0x020e0338 0x00000028
-DATA 4 0x020e0320 0x00000030
-DATA 4 0x020e032c 0x00000000
-DATA 4 0x020e033c 0x00000008
-DATA 4 0x020e0340 0x00000008
-DATA 4 0x020e05c4 0x00000030
-DATA 4 0x020e05cc 0x00000030
-DATA 4 0x020e05d4 0x00000030
-DATA 4 0x020e05d8 0x00000030
-DATA 4 0x020e05ac 0x00000030
-DATA 4 0x020e05c8 0x00000030
-DATA 4 0x020e05b0 0x00020000
-DATA 4 0x020e05b4 0x00000000
-DATA 4 0x020e05c0 0x00020000
-DATA 4 0x020e05d0 0x00080000
-
-DATA 4 0x021b001c 0x00008000
-DATA 4 0x021b085c 0x1b4700c7
-DATA 4 0x021b0800 0xa1390003
-DATA 4 0x021b0890 0x00400000
-DATA 4 0x021b08b8 0x00000800
-DATA 4 0x021b081c 0x33333333
-DATA 4 0x021b0820 0x33333333
-DATA 4 0x021b0824 0x33333333
-DATA 4 0x021b0828 0x33333333
-DATA 4 0x021b082c 0xf3333333
-DATA 4 0x021b0830 0xf3333333
-DATA 4 0x021b0834 0xf3333333
-DATA 4 0x021b0838 0xf3333333
-DATA 4 0x021b0848 0x4241444a
-DATA 4 0x021b0850 0x3030312b
-DATA 4 0x021b083c 0x20000000
-DATA 4 0x021b0840 0x00000000
-DATA 4 0x021b08c0 0x24911492
-DATA 4 0x021b08b8 0x00000800
-DATA 4 0x021b000c 0x33374133
-DATA 4 0x021b0004 0x00020024
-DATA 4 0x021b0010 0x00100A82
-DATA 4 0x021b0014 0x00000093
-DATA 4 0x021b0018 0x00001688
-DATA 4 0x021b002c 0x0f9f26d2
-DATA 4 0x021b0030 0x009f0e10
-DATA 4 0x021b0038 0x00190778
-DATA 4 0x021b0008 0x00000000
-DATA 4 0x021b0040 0x0000004f
-DATA 4 0x021b0000 0x83110000
-DATA 4 0x021b001c 0x003f8030
-DATA 4 0x021b001c 0xff0a8030
-DATA 4 0x021b001c 0x82018030
-DATA 4 0x021b001c 0x04028030
-DATA 4 0x021b001c 0x02038030
-DATA 4 0x021b001c 0xff0a8038
-DATA 4 0x021b001c 0x82018038
-DATA 4 0x021b001c 0x04028038
-DATA 4 0x021b001c 0x02038038
-DATA 4 0x021b0800 0xa1310003
-DATA 4 0x021b0020 0x00001800
-DATA 4 0x021b0818 0x00000000
-DATA 4 0x021b08b8 0x00000800
-DATA 4 0x021b0004 0x00025564
-DATA 4 0x021b0404 0x00011006
-DATA 4 0x021b001c 0x00000000
diff --git a/board/warp/warp.c b/board/warp/warp.c
deleted file mode 100644
index c03b648..0000000
--- a/board/warp/warp.c
+++ /dev/null
@@ -1,236 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2014, 2015 O.S. Systems Software LTDA.
- * Copyright (C) 2014 Kynetics LLC.
- * Copyright (C) 2014 Revolution Robotics, Inc.
- *
- * Author: Otavio Salvador <otavio@ossystems.com.br>
- */
-
-#include <init.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx6-pins.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/global_data.h>
-#include <asm/gpio.h>
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/mxc_i2c.h>
-#include <asm/io.h>
-#include <linux/sizes.h>
-#include <common.h>
-#include <watchdog.h>
-#include <fsl_esdhc_imx.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <usb.h>
-#include <power/pmic.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
-	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
-	PAD_CTL_SRE_FAST  | PAD_CTL_HYS | \
-	PAD_CTL_LVE)
-
-#define USDHC_PAD_CTRL (PAD_CTL_PUS_22K_UP | \
-	PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
-	PAD_CTL_SRE_FAST  | PAD_CTL_HYS | \
-	PAD_CTL_LVE)
-
-#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |		\
-		      PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |	\
-		      PAD_CTL_DSE_40ohm | PAD_CTL_HYS |		\
-		      PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
-#define CONFIG_POWER_MAX77696_I2C_ADDR	0x3C
-
-enum {
-	L01_CNFG1 =	0x43,
-	L01_CNFG2,
-	L02_CNFG1,
-	L02_CNFG2,
-	L03_CNFG1,
-	L03_CNFG2,
-	L04_CNFG1,
-	L04_CNFG2,
-	L05_CNFG1,
-	L05_CNFG2,
-	L06_CNFG1,
-	L06_CNFG2,
-	L07_CNFG1,
-	L07_CNFG2,
-	L08_CNFG1,
-	L08_CNFG2,
-	L09_CNFG1,
-	L09_CNFG2,
-	L10_CNFG1,
-	L10_CNFG2,
-	LDO_INT1,
-	LDO_INT2,
-	LDO_INT1M,
-	LDO_INT2M,
-	LDO_CNFG3,
-	SW1_CNTRL,
-	SW2_CNTRL,
-	SW3_CNTRL,
-	SW4_CNTRL,
-	EPDCNFG,
-	EPDINTS,
-	EPDINT,
-	EPDINTM,
-	EPDVCOM,
-	EPDVEE,
-	EPDVNEG,
-	EPDVPOS,
-	EPDVDDH,
-	EPDSEQ,
-	EPDOKINTS,
-	CID =	0x9c,
-	PMIC_NUM_OF_REGS,
-};
-
-int dram_init(void)
-{
-	gd->ram_size = imx_ddr_size();
-
-	return 0;
-}
-
-static void setup_iomux_uart(void)
-{
-	static iomux_v3_cfg_t const uart1_pads[] = {
-		MX6_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
-		MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
-	};
-
-	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-}
-
-static struct fsl_esdhc_cfg usdhc_cfg[1] = {
-	{USDHC2_BASE_ADDR, 0, 0, 0, 1},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	return 1;	/* Assume boot SD always present */
-}
-
-int board_mmc_init(struct bd_info *bis)
-{
-	static iomux_v3_cfg_t const usdhc2_pads[] = {
-		MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-		MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-		MX6_PAD_SD2_RST__USDHC2_RST | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-		MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-		MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-		MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-		MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-		MX6_PAD_SD2_DAT4__USDHC2_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-		MX6_PAD_SD2_DAT5__USDHC2_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-		MX6_PAD_SD2_DAT6__USDHC2_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-		MX6_PAD_SD2_DAT7__USDHC2_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	};
-
-	imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
-
-	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
-	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
-}
-
-int board_usb_phy_mode(int port)
-{
-	return USB_INIT_DEVICE;
-}
-
-/* I2C1 for PMIC */
-#define I2C_PMIC	0
-#define PC	MUX_PAD_CTRL(I2C_PAD_CTRL)
-struct i2c_pads_info i2c_pad_info1 = {
-	.sda = {
-		.i2c_mode = MX6_PAD_I2C1_SDA__I2C1_SDA | PC,
-		.gpio_mode = MX6_PAD_I2C1_SDA__GPIO_3_13 | PC,
-		.gp = IMX_GPIO_NR(3, 13),
-	},
-	.scl = {
-		.i2c_mode = MX6_PAD_I2C1_SCL__I2C1_SCL | PC,
-		.gpio_mode = MX6_PAD_I2C1_SCL__GPIO_3_12 | PC,
-		.gp = IMX_GPIO_NR(3, 12),
-	},
-};
-
-static int power_max77696_init(unsigned char bus)
-{
-	static const char name[] = "MAX77696";
-	struct pmic *p = pmic_alloc();
-
-	if (!p) {
-		printf("%s: POWER allocation error!\n", __func__);
-		return -ENOMEM;
-	}
-
-	p->name = name;
-	p->interface = PMIC_I2C;
-	p->number_of_regs = PMIC_NUM_OF_REGS;
-	p->hw.i2c.addr = CONFIG_POWER_MAX77696_I2C_ADDR;
-	p->hw.i2c.tx_num = 1;
-	p->bus = bus;
-
-	return 0;
-}
-
-int power_init_board(void)
-{
-	struct pmic *p;
-	int ret;
-	unsigned int reg;
-
-	ret = power_max77696_init(I2C_PMIC);
-	if (ret)
-		return ret;
-
-	p = pmic_get("MAX77696");
-	if (!p)
-		return -EINVAL;
-
-	ret = pmic_reg_read(p, CID, &reg);
-	if (ret)
-		return ret;
-
-	printf("PMIC:  MAX77696 detected, rev=0x%x\n", reg);
-
-	return pmic_probe(p);
-}
-
-int board_early_init_f(void)
-{
-	setup_iomux_uart();
-	return 0;
-}
-
-int board_init(void)
-{
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-
-	return 0;
-}
-
-int board_late_init(void)
-{
-#ifdef CONFIG_HW_WATCHDOG
-	hw_watchdog_init();
-#endif
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	puts("Board: WaRP Board\n");
-
-	return 0;
-}
diff --git a/configs/warp_defconfig b/configs/warp_defconfig
deleted file mode 100644
index 63f2f21..0000000
--- a/configs/warp_defconfig
+++ /dev/null
@@ -1,52 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x87800000
-CONFIG_SYS_MALLOC_LEN=0x2300000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x60000
-CONFIG_MX6SL=y
-CONFIG_TARGET_WARP=y
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-# CONFIG_CMD_BMODE is not set
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_SYS_PBSIZE=532
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-# CONFIG_NET is not set
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_DFU_MMC=y
-CONFIG_SYS_DFU_DATA_BUF_SIZE=0x1000000
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE=y
-CONFIG_FSL_USDHC=y
-CONFIG_POWER_LEGACY=y
-CONFIG_POWER_I2C=y
-CONFIG_MXC_UART=y
-CONFIG_USB=y
-CONFIG_WATCHDOG_TIMEOUT_MSECS=30000
-CONFIG_IMX_WATCHDOG=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/warp.h b/include/configs/warp.h
deleted file mode 100644
index d2c4391..0000000
--- a/include/configs/warp.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2014 O.S. Systems Software LTDA.
- * Copyright (C) 2014 Kynetics LLC.
- * Copyright (C) 2014 Revolution Robotics, Inc.
- *
- * Author: Otavio Salvador <otavio@ossystems.com.br>
- *
- * Configuration settings for the WaRP Board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "mx6_common.h"
-
-#define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR
-
-/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
-
-/* Watchdog */
-
-/* Physical Memory Map */
-#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-
-/* VDD voltage 1.65 - 1.95 */
-#define CONFIG_SYS_SD_VOLTAGE		0x00000080
-
-/* USB Configs */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS		0
-#endif
-
-#define CONFIG_USBD_HS
-
-#define DFU_DEFAULT_POLL_TIMEOUT 300
-
-/* I2C Configs */
-
-/* PMIC */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"image=zImage\0" \
-	"console=ttymxc0\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
-	"fdt_file=imx6sl-warp.dtb\0" \
-	"fdt_addr=0x88000000\0" \
-	"initrd_addr=0x83800000\0" \
-	"boot_fdt=try\0" \
-	"ip_dyn=yes\0" \
-	"mmcdev=0\0" \
-	"mmcpart=1\0" \
-	"finduuid=part uuid mmc 0:2 uuid\0" \
-	"dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=PARTUUID=${uuid} rootwait rw\0" \
-	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run finduuid; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
-		"root=/dev/nfs " \
-	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-		"netboot=echo Booting from net ...; " \
-		"run netargs; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${image}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0"
-
-#endif				/* __CONFIG_H */