* Patch by Thomas Elste, 10 Feb 2004:

  Add support for NET+50 CPU and ModNET50 board

* Patch by Sam Song, 10 Feb 2004:
  Fix typos in cfi_flash.c

* Patch by Leon Kukovec, 10 Feb 2004
  Fixed long dir entry slot id calculation in get_vfatname

* Patch by Robin Gilks, 10 Feb 2004:
  add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
  !=, <>, <, >, <=, >=)

36 files changed, 3340 insertions, 27 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 0c32415..b6eaa89 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,19 @@
 Changes for U-Boot 1.0.2:
 ======================================================================
 
+* Patch by Thomas Elste, 10 Feb 2004:
+  Add support for NET+50 CPU and ModNET50 board
+
+* Patch by Sam Song, 10 Feb 2004:
+  Fix typos in cfi_flash.c
+
+* Patch by Leon Kukovec, 10 Feb 2004
+  Fixed long dir entry slot id calculation in get_vfatname
+
+* Patch by Robin Gilks, 10 Feb 2004:
+  add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
+  !=, <>, <, >, <=, >=)
+
 * Fix problem with side effects in macros in include/usb.h
 
 * Patch by David Benson, 13 Nov 2003:
diff --git a/Makefile b/Makefile
index 965b93d..3525d87 100644
--- a/Makefile
+++ b/Makefile
@@ -959,6 +959,9 @@ impa7_config	:	unconfig
 ep7312_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm720t ep7312
 
+modnet50_config :	unconfig
+	@./mkconfig $(@:_config=) arm arm720t modnet50
+
 #########################################################################
 ## XScale Systems
 #########################################################################
diff --git a/README b/README
index 41e99e3..2c56820 100644
--- a/README
+++ b/README
@@ -644,6 +644,7 @@ The following options need to be configured:
 		CFG_CMD_IMLS	  List all found images
 		CFG_CMD_IMMAP	* IMMR dump support
 		CFG_CMD_IRQ	* irqinfo
+		CFG_CMD_ITEST	* Integer/string test of 2 values
 		CFG_CMD_JFFS2	* JFFS2 Support
 		CFG_CMD_KGDB	* kgdb
 		CFG_CMD_LOADB	  loadb
diff --git a/board/modnet50/Makefile b/board/modnet50/Makefile
new file mode 100644
index 0000000..7dbcc1c
--- /dev/null
+++ b/board/modnet50/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= modnet50.o flash.o
+SOBJS	:= memsetup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/modnet50/config.mk b/board/modnet50/config.mk
new file mode 100644
index 0000000..49d4836
--- /dev/null
+++ b/board/modnet50/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x00f00000
+#CROSS_COMPILE = arm-elf-
diff --git a/board/modnet50/flash.c b/board/modnet50/flash.c
new file mode 100644
index 0000000..fc04d91
--- /dev/null
+++ b/board/modnet50/flash.c
@@ -0,0 +1,536 @@
+/*
+ * (C) Copyright 2002
+ * MAZeT GmbH <www.mazet.de>
+ * Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
+ *
+ * The most stuff comes from PPCBoot and Linux.
+ *
+ * IMMS gGmbH <www.imms.de>
+ * Thomas Elste <info@elste.org>
+ *
+ * Modifications for ModNET50 Board
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/netarm_registers.h>
+
+#define SCR   (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_SYSTEM_CONTROL))
+
+#define ALIGN_ABORT_OFF		SCR = SCR & ~NETARM_GEN_SYS_CFG_ALIGN_ABORT
+#define ALIGN_ABORT_ON		SCR = SCR |  NETARM_GEN_SYS_CFG_ALIGN_ABORT
+
+#define PROG_ADDR		(0x555*2)
+#define SETUP_ADDR		(0x555*2)
+#define ID_ADDR			(0x555*2)
+#define UNLOCK_ADDR1		(0x555*2)
+#define UNLOCK_ADDR2		(0x2AA*2)
+
+#define UNLOCK_CMD1		(0xAA)
+#define UNLOCK_CMD2		(0x55)
+#define ERASE_SUSPEND_CMD	(0xB0)
+#define ERASE_RESUME_CMD	(0x30)
+#define RESET_CMD		(0xF0)
+#define ID_CMD			(0x90)
+#define SECERASE_CMD		(0x30)
+#define CHIPERASE_CMD		(0x10)
+#define PROG_CMD		(0xa0)
+#define SETUP_CMD		(0x80)
+
+#define DQ2			(0x04)
+#define DQ3			(DQ2*2)
+#define DQ5			(DQ3*4)
+#define DQ6			(DQ5*2)
+
+#define WRITE_UNLOCK(addr) { \
+  *(volatile __u16*)(addr + UNLOCK_ADDR1) = (__u16)UNLOCK_CMD1; \
+  *(volatile __u16*)(addr + UNLOCK_ADDR2) = (__u16)UNLOCK_CMD2; \
+}
+
+#define CONFIG_AM29_RESERVED	(0)
+#define K			(1024)
+#define MB			(4)
+
+#define CELL_SIZE		(64*K)
+#define DEVICE_SIZE		(MB*K*K)
+#define CELLS_PER_DEVICE	(DEVICE_SIZE/CELL_SIZE)
+#define RESERVED_CELLS		(CONFIG_AM29_RESERVED*K)/CELL_SIZE
+#define MAX_FLASH_DEVICES	(1)
+#define AVAIL_SIZE		(DEVICE_SIZE*MAX_FLASH_DEVICES - RESERVED_CELLS*CELL_SIZE)
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+static __u16 toggling_bits;
+
+
+/*-----------------------------------------------------------------------
+ */
+ulong flash_get_size (ulong baseaddr, flash_info_t * info)
+{
+	short i;
+	__u16 flashtest;
+
+	/* Write auto select command sequence and test FLASH answer */
+	WRITE_UNLOCK (baseaddr);
+	*(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) ID_CMD;
+	flashtest /* manufacturer ID */  = *(volatile __u16 *) (baseaddr);
+	*(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) RESET_CMD;
+
+	switch ((__u32) ((flashtest << 16) + flashtest)) {
+	case AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD & FLASH_VENDMASK;
+		break;
+	case FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ & FLASH_VENDMASK;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);	/* no or unknown flash */
+	}
+
+	/* Write auto select command sequence and test FLASH answer */
+	WRITE_UNLOCK (baseaddr);
+	*(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) ID_CMD;
+	flashtest /* device ID */  = *(volatile __u16 *) (baseaddr + 2);
+	*(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) RESET_CMD;
+
+	/* toggling_bits = (flashtest == TOSHIBA)?(DQ6):(DQ2|DQ6); */
+	toggling_bits = (DQ2 | DQ6);
+
+	switch ((__u32) ((flashtest << 16) + flashtest)) {
+	case AMD_ID_LV160B:
+		info->flash_id +=
+			(FLASH_AM160LV | FLASH_AM160B) & FLASH_TYPEMASK;
+		info->sector_count = CFG_MAX_FLASH_SECT;
+		info->size = CFG_FLASH_SIZE;
+		/* 1*16K Boot Block
+		   2*8K Parameter Block
+		   1*32K Small Main Block */
+		info->start[0] = baseaddr;
+		info->start[1] = baseaddr + 0x4000;
+		info->start[2] = baseaddr + 0x6000;
+		info->start[3] = baseaddr + 0x8000;
+		for (i = 1; i < info->sector_count; i++)
+			info->start[3 + i] = baseaddr + i * CFG_MAIN_SECT_SIZE;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);	/* no or unknown flash */
+	}
+
+	for (i = 0; i < info->sector_count; i++) {
+		/* Write auto select command sequence and test FLASH answer */
+		WRITE_UNLOCK (info->start[i]);
+		*(volatile __u16 *) (info->start[i] + ID_ADDR) = (__u16) ID_CMD;
+		flashtest /* protected verify */  = *(volatile __u16 *) (info->start[i] + 4);
+		*(volatile __u16 *) (info->start[i] + ID_ADDR) = (__u16) RESET_CMD;
+		if (flashtest & 0x0001) {
+			info->protect[i] = 1;	/* D0 = 1 if protected */
+		} else {
+			info->protect[i] = 0;
+		}
+	}
+	return (info->size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+ulong flash_init (void)
+{
+	ulong size = 0;
+	int i;
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here (only one bank) */
+	size = flash_get_size (CFG_FLASH_BASE, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN || size == 0) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size, size >> 20);
+	}
+
+	/*
+	 * protect monitor and environment sectors
+	 */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_FLASH_BASE,
+		       CFG_FLASH_BASE + monitor_flash_len - 1,
+		       &flash_info[0]);
+
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR,
+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:
+		printf ("AMD ");
+		break;
+	case FLASH_MAN_FUJ:
+		printf ("Fujitsu ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AMDL323B:
+		printf ("29DL323B (32 M, bottom sector)\n");
+		break;
+	case (FLASH_AM160LV | FLASH_AM160B):
+		printf ("29LV160BE (1M x 16, bottom sector)\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 4) == 0)
+			printf ("\n   ");
+		printf (" S%02d @ 0x%08lX%s", i,
+			info->start[i], info->protect[i] ? " !" : "  ");
+	}
+	printf ("\n");
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_check_protection (flash_info_t * info, int s_first, int s_last)
+{
+	int sect, prot = 0;
+
+	for (sect = s_first; sect <= s_last; sect++)
+		if (info->protect[sect])
+			prot++;
+	if (prot)
+		printf ("- can't erase %d protected sectors\n", prot);
+	return prot;
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_check_erase_amd (ulong start)
+{
+	__u16 v1, v2;
+
+	v1 = *(volatile __u16 *) (start);
+	v2 = *(volatile __u16 *) (start);
+
+	if (((v1 ^ v2) & toggling_bits) == toggling_bits) {
+		if (((v1 | v2) & DQ5) == DQ5) {
+			printf ("[DQ5] ");
+			/* OOPS: exceeded timing limits */
+
+			v1 = *(volatile __u16 *) (start);
+			v2 = *(volatile __u16 *) (start);
+
+			if (((v1 ^ v2) & toggling_bits) == toggling_bits) {
+
+				printf ("[%s] ",
+					((toggling_bits & (DQ2 | DQ6)) ==
+					 (DQ2 | DQ6)) ? "DQ2,DQ6" : "DQ6");
+
+				/* OOPS: there is an erasure in progress,
+				 *       try to reset chip */
+				*(volatile __u16 *) (start) =
+					(__u16) RESET_CMD;
+
+				return 1;	/* still busy */
+			}
+		}
+		return 1;	/* still busy */
+	}
+	return 0;		/* be free */
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int flag, sect, setup_offset = 0;
+	int rc = ERR_OK;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("- missing\n");
+		return ERR_UNKNOWN_FLASH_TYPE;
+	}
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		printf ("- no sectors to erase\n");
+		return ERR_INVAL;
+	}
+
+	if (flash_check_protection (info, s_first, s_last))
+		return ERR_PROTECTED;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_FUJ:
+	case FLASH_MAN_AMD:
+		switch (info->flash_id & FLASH_TYPEMASK) {
+		case (FLASH_AM160LV | FLASH_AM160B):
+			setup_offset = UNLOCK_ADDR1;	/* just the adress for setup_cmd differs */
+		case FLASH_AMDL323B:
+			/* 
+			 * Disable interrupts which might cause a timeout
+			 * here. Remember that our exception vectors are
+			 * at address 0 in the flash, and we don't want a
+			 * (ticker) exception to happen while the flash
+			 * chip is in programming mode.
+			 */
+			flag = disable_interrupts ();
+			/* Start erase on unprotected sectors */
+			for (sect = s_first; sect <= s_last && !ctrlc ();
+			     sect++) {
+				printf ("Erasing sector %2d ... ", sect);
+
+				if (info->protect[sect] == 0) {
+					/* not protected */
+					/* Write sector erase command sequence */
+					WRITE_UNLOCK (info->start[0]);
+					*(volatile __u16 *) (info->start[0] +
+							     setup_offset) =
+						(__u16) SETUP_CMD;
+					WRITE_UNLOCK (info->start[0]);
+					*(volatile __u16 *) (info->
+							     start[sect]) =
+						(__u16) SECERASE_CMD;
+
+					/* wait some time */
+					reset_timer_masked ();
+					while (get_timer_masked () < 1000) {
+					}
+
+					/* arm simple, non interrupt dependent timer */
+					reset_timer_masked ();
+					while (flash_check_erase_amd (info->start[sect])) {
+						if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+							printf ("timeout!\n");
+							/* OOPS: reach timeout,
+							 * try to reset chip
+							 */
+							*(volatile __u16 *) (info-> start[sect]) = (__u16) RESET_CMD;
+							rc = ERR_TIMOUT;
+							goto outahere_323B;
+						}
+					}
+					printf ("ok.\n");
+				} else {
+					printf ("protected!\n");
+				}
+			}
+			if (ctrlc ())
+				printf ("User Interrupt!\n");
+outahere_323B:
+			/* allow flash to settle - wait 10 ms */
+			udelay_masked (10000);
+			if (flag)
+				enable_interrupts ();
+			return rc;
+		default:
+			printf ("- unknown chip type\n");
+			return ERR_UNKNOWN_FLASH_TYPE;
+		}
+		break;
+	default:
+		printf ("- unknown vendor ");
+		return ERR_UNKNOWN_FLASH_VENDOR;
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_check_write_amd (ulong dest)
+{
+	__u16 v1, v2;
+
+	v1 = *(volatile __u16 *) (dest);
+	v2 = *(volatile __u16 *) (dest);
+
+	/* DQ6 toggles during write */
+	if (((v1 ^ v2) & DQ6) == DQ6) {
+		if (((v1 | v2) & DQ5) == DQ5) {
+			printf ("[DQ5] @ %08lX\n", dest);
+
+			/* OOPS: exceeded timing limits,
+			 *       try to reset chip */
+			*(volatile __u16 *) (dest) = (__u16) RESET_CMD;
+			return 0;	/* be free */
+		}
+		return 1;	/* still busy */
+	}
+
+	return 0;		/* be free */
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+static int write_word (flash_info_t * info, ulong dest, ushort data)
+{
+	int rc = ERR_OK;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*(__u16 *) (dest) & data) != data)
+		return ERR_NOT_ERASED;
+
+	/* 
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	flag = disable_interrupts ();
+
+	/* Write program command sequence */
+	WRITE_UNLOCK (info->start[0]);
+
+	/* Flash dependend program seqence */
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_FUJ:
+	case FLASH_MAN_AMD:
+		switch (info->flash_id & FLASH_TYPEMASK) {
+		case (FLASH_AM160LV | FLASH_AM160B):
+			*(volatile __u16 *) (info->start[0] + UNLOCK_ADDR1) =
+				(__u16) PROG_CMD;
+			*(volatile __u16 *) (dest) = (__u16) data;
+			break;
+		case FLASH_AMDL323B:
+			*(volatile __u16 *) (dest) = (__u16) PROG_CMD;
+			*(volatile __u16 *) (dest) = (__u16) data;
+			break;
+		}
+	}
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+
+	while (flash_check_write_amd (dest)) {
+		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+			printf ("timeout! @ %08lX\n", dest);
+			/* OOPS: reach timeout,
+			 *       try to reset chip */
+			*(volatile __u16 *) (dest) = (__u16) RESET_CMD;
+
+			rc = ERR_TIMOUT;
+			goto outahere_323B;
+		}
+	}
+
+	/* Check if Flash was (accurately) written */
+	if (*(__u16 *) (dest) != data)
+		rc = ERR_PROG_ERROR;
+
+outahere_323B:
+	if (flag)
+		enable_interrupts ();
+	return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	ushort data;
+	int l;
+	int i, rc;
+
+	wp = (addr & ~1);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 8);
+		}
+		for (; i < 2 && cnt > 0; ++i) {
+			data = (data >> 8) | (*src++ << 8);
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 2; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 8);
+		}
+
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 2;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 2) {
+		data = *((ushort *) src);
+		if ((rc = write_word (info, wp, data)) != 0)
+			return (rc);
+		src += 2;
+		wp += 2;
+		cnt -= 2;
+	}
+
+	if (cnt == 0)
+		return ERR_OK;
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
+		data = (data >> 8) | (*src++ << 8);
+		--cnt;
+	}
+	for (; i < 2; ++i, ++cp) {
+		data = (data >> 8) | (*(uchar *) cp << 8);
+	}
+
+	return write_word (info, wp, data);
+}
diff --git a/board/modnet50/memsetup.S b/board/modnet50/memsetup.S
new file mode 100644
index 0000000..674b1d2
--- /dev/null
+++ b/board/modnet50/memsetup.S
@@ -0,0 +1,204 @@
+/*
+ * Memory Setup stuff - taken from Linux
+ *
+ * Copyright (c) 2002	Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
+ * (c) 2004 IMMS gGmbH <www.imms.de>, Thomas Elste <info@elste.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/netarm_registers.h>
+
+
+/* some parameters for the board */
+#define FLASH_90ns_WAIT_STATES	((NETARM_PLL_COUNT_VAL + 2) / 3)
+#define FLASH_70ns_WAIT_STATES	4
+
+#define NETARM_MMAP_CS0_BASE	(PHYS_FLASH_1)
+#if 1
+#define NETARM_MMAP_CS0_MASK	(~(PHYS_FLASH_1_SIZE - 1))
+#else
+#define NETARM_MMAP_CS0_MASK	(~(1000000 - 1))
+#endif
+#define NETARM_MMAP_CS1_BASE	(PHYS_SDRAM_1)
+#define NETARM_MMAP_CS1_MASK	(~(PHYS_SDRAM_1_SIZE - 1))
+#define NETARM_MMAP_CS2_BASE	(PHYS_SDRAM_2)
+#define NETARM_MMAP_CS2_MASK	(~(PHYS_SDRAM_2_SIZE - 1))
+#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE)
+#define NETARM_MMAP_CS3_BASE	(PHYS_NVRAM_1)
+#define NETARM_MMAP_CS3_MASK	(~(PHYS_NVRAM_SIZE - 1))
+#endif
+#define NETARM_MMAP_CS4_BASE	(PHYS_EXT_1)
+#define NETARM_MMAP_CS4_MASK	(~(PHYS_EXT_SIZE - 1))
+
+/* setting up the memory */
+.globl memsetup
+memsetup:
+
+#if defined(CONFIG_MODNET50)
+	ldr	pc, =(_jump_to_high + NETARM_MMAP_CS0_BASE - TEXT_BASE)
+
+_jump_to_high:
+	/*
+	 * MEM Config Reg
+	 * ---------------------------------------------------
+	 */
+	ldr	r0, =NETARM_MEM_MODULE_BASE
+	ldr	r1, =(	NETARM_MEM_REFR_PERIOD_USEC(16) | \
+			NETARM_MEM_CFG_REFRESH_EN | \
+			NETARM_MEM_CFG_REFR_CYCLE_5CLKS )
+	str	r1, [r0, #+NETARM_MEM_MODULE_CONFIG]
+
+
+memsetup_cs0:
+	/*
+	 * Base Addr / Option Reg 0 (Flash)
+	 * ---------------------------------------------------
+	 */
+	ldr	r1, =(	NETARM_MEM_BAR_BASE(NETARM_MMAP_CS0_BASE) | \
+			NETARM_MEM_BAR_DRAM_FP | \
+			NETARM_MEM_BAR_DRAM_MUX_INT | \
+			NETARM_MEM_BAR_DRAM_MUX_BAL | \
+			NETARM_MEM_BAR_VALID )
+	str	r1, [r0, #+NETARM_MEM_CS0_BASE_ADDR]
+
+	/* trust that the bus size for flash was strapped correctly */
+	/* this saves the bus width in r2 and then ORs it back in */
+	/* it's pretty safe assumption, otherwise it wouldn't boot */
+	ldr	r2, [r0, #+NETARM_MEM_CS0_OPTIONS]
+	and	r2, r2, #NETARM_MEM_OPT_BUS_SIZE_MASK
+
+/*	just a test: assume 32 bit flash mem */
+/*	mov	r2, #NETARM_MEM_OPT_32BIT */
+
+	ldr	r1, =(	NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS0_MASK) | \
+			NETARM_MEM_OPT_WAIT_STATES(FLASH_70ns_WAIT_STATES) | \
+			NETARM_MEM_OPT_BCYC_4 | \
+			NETARM_MEM_OPT_BSIZE_16 | \
+			NETARM_MEM_OPT_16BIT | \
+			NETARM_MEM_OPT_READ_ASYNC | \
+			NETARM_MEM_OPT_WRITE_ASYNC )
+
+	orr	r1, r1, r2
+	str	r1, [r0, #+NETARM_MEM_CS0_OPTIONS]
+
+
+memsetup_cs1:
+	/*
+	 * Base Addr / Option Reg 1 (DRAM #1)
+	 * ---------------------------------------------------
+	 */
+#ifdef CONFIG_NETARM_NET40_REV2
+	/* we have to config SDRAM in burst mode */
+	ldr	r1, =(	NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \
+			NETARM_MEM_OPT_BCYC_2 | \
+			NETARM_MEM_OPT_BSIZE_16 | \
+			NETARM_MEM_OPT_WAIT_STATES(0) | \
+			NETARM_MEM_OPT_32BIT | \
+			NETARM_MEM_OPT_READ_ASYNC | \
+			NETARM_MEM_OPT_WRITE_ASYNC )
+	str	r1, [r0, #+NETARM_MEM_CS1_OPTIONS]
+
+	ldr	r1, =(	NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \
+			NETARM_MEM_BAR_DRAM_SYNC | \
+			NETARM_MEM_BAR_DRAM_MUX_INT | \
+			NETARM_MEM_BAR_DRAM_MUX_UNBAL | \
+			NETARM_MEM_BAR_DRAM_SEL | \
+			NETARM_MEM_BAR_BURST_EN | \
+			NETARM_MEM_BAR_VALID )
+	str	r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR]
+#else
+	/* we have to config FPDRAM in burst mode with smaller burst access size */
+	ldr	r1, =(	NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \
+			NETARM_MEM_OPT_BCYC_2 | \
+			NETARM_MEM_OPT_BSIZE_16 | \
+			NETARM_MEM_OPT_WAIT_STATES(0) | \
+			NETARM_MEM_OPT_32BIT | \
+			NETARM_MEM_OPT_READ_ASYNC | \
+			NETARM_MEM_OPT_WRITE_ASYNC )
+	str	r1, [r0, #+NETARM_MEM_CS1_OPTIONS]
+
+	ldr	r1, =(	NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \
+			NETARM_MEM_BAR_DRAM_SYNC | \
+			NETARM_MEM_BAR_DRAM_MUX_INT | \
+			NETARM_MEM_BAR_DRAM_MUX_UNBAL | \
+			NETARM_MEM_BAR_DRAM_SEL | \
+			NETARM_MEM_BAR_BURST_EN | \
+			NETARM_MEM_BAR_VALID )
+	str	r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR]
+
+#endif /* CONFIG_NETARM_NET40_REV2 */
+
+
+memsetup_cs3:
+	/*
+	 * Base Addr / Option Reg 3 (EEPROM, NVRAM)
+	 * ---------------------------------------------------
+	 */
+#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE)
+	ldr	r1, =(	NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS3_MASK) | \
+			NETARM_MEM_OPT_BCYC_3 | \
+			NETARM_MEM_OPT_BSIZE_2 | \
+			NETARM_MEM_OPT_WAIT_STATES(10) | \
+			NETARM_MEM_OPT_8BIT | \
+			NETARM_MEM_OPT_READ_ASYNC | \
+			NETARM_MEM_OPT_WRITE_ASYNC )
+	str	r1, [r0, #+NETARM_MEM_CS3_OPTIONS]
+
+	ldr	r1, =(	NETARM_MEM_BAR_BASE(NETARM_MMAP_CS3_BASE) | \
+			NETARM_MEM_BAR_DRAM_FP | \
+			NETARM_MEM_BAR_DRAM_MUX_INT | \
+			NETARM_MEM_BAR_DRAM_MUX_BAL | \
+			NETARM_MEM_BAR_VALID )
+	str	r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR]
+#else
+	/* we don't need EEPROM --> no config */
+	ldr	r1, =( 0 )
+	str	r1, [r0, #+NETARM_MEM_CS3_OPTIONS]
+
+	ldr	r1, =( 0 )
+	str	r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR]
+#endif
+
+
+#else
+/*
+#error "missing CONFIG_MODNET50 (see your config.h)"
+*/
+#endif /* CONFIG_MODNET50 */
+
+
+memsetup_end:
+	/*
+	 * manipulate address in lr and ip to match new
+	 * address space
+	 */
+	ldr	r3, =(NETARM_MMAP_CS0_BASE)
+	mov	r0, lr
+	add	r0, r3, r0
+	mov	lr, r0
+	mov	r0, ip
+	add	r0, r3, r0
+	mov	ip, r0
+
+	/* everything is fine now */
+	mov	pc, lr
diff --git a/board/modnet50/modnet50.c b/board/modnet50/modnet50.c
new file mode 100644
index 0000000..448c623
--- /dev/null
+++ b/board/modnet50/modnet50.c
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	/* address for the kernel command line */
+	gd->bd->bi_boot_params = 0x800;
+	return 0;
+}
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	if (CONFIG_NR_DRAM_BANKS == 2) {
+		gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+		gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+	}
+	return (0);
+}
diff --git a/board/modnet50/u-boot.lds b/board/modnet50/u-boot.lds
new file mode 100644
index 0000000..ac09f5f
--- /dev/null
+++ b/board/modnet50/u-boot.lds
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/arm720t/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+                                  /* Stabs debugging sections.    */
+        .stab 0 : { *(.stab) }
+        .stabstr 0 : { *(.stabstr) }
+        .stab.excl 0 : { *(.stab.excl) }
+        .stab.exclstr 0 : { *(.stab.exclstr) }
+        .stab.index 0 : { *(.stab.index) }
+        .stab.indexstr 0 : { *(.stab.indexstr) }
+        .comment 0 : { *(.comment) }
+        .debug_abbrev 0 : { *(.debug_abbrev) }
+        .debug_info 0 : { *(.debug_info) }
+        .debug_line 0 : { *(.debug_line) }
+        .debug_pubnames 0 : { *(.debug_pubnames) }
+        .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/common/Makefile b/common/Makefile
index 66cb9ed..eccb4e4 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -34,7 +34,7 @@ COBJS	= main.o ACEX1K.o altera.o bedbug.o \
 	  cmd_date.o cmd_dcr.o cmd_diag.o cmd_doc.o cmd_dtt.o \
 	  cmd_eeprom.o cmd_elf.o \
 	  cmd_fat.o cmd_fdc.o cmd_fdos.o cmd_flash.o cmd_fpga.o \
-	  cmd_i2c.o cmd_ide.o cmd_immap.o cmd_jffs2.o \
+	  cmd_i2c.o cmd_ide.o cmd_immap.o cmd_itest.o cmd_jffs2.o \
 	  cmd_load.o cmd_log.o \
 	  cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \
 	  cmd_nand.o cmd_net.o cmd_nvedit.o \
@@ -44,10 +44,10 @@ COBJS	= main.o ACEX1K.o altera.o bedbug.o \
 	  environment.o env_common.o \
 	  env_dataflash.o env_flash.o env_eeprom.o env_nvram.o env_nowhere.o exports.o \
 	  flash.o fpga.o \
-	  hush.o kgdb.o lists.o lynxkdi.o miiphybb.o miiphyutil.o \
+	  hush.o kgdb.o lists.o lynxkdi.o memsize.o miiphybb.o miiphyutil.o \
 	  s_record.o soft_i2c.o soft_spi.o spartan2.o \
 	  usb.o usb_kbd.o usb_storage.o \
-	  virtex2.o xilinx.o memsize.o
+	  virtex2.o xilinx.o
 
 OBJS	= $(AOBJS) $(COBJS)
 
diff --git a/common/cmd_itest.c b/common/cmd_itest.c
new file mode 100644
index 0000000..9e920c9
--- /dev/null
+++ b/common/cmd_itest.c
@@ -0,0 +1,197 @@
+/*
+ * (C) Copyright 2003
+ * Tait Electronics Limited, Christchurch, New Zealand
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file provides a shell like 'test' function to return
+ * true/false from an integer or string compare of two memory
+ * locations or a location and a scalar/literal.
+ * A few parts were lifted from bash 'test' command
+ */
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+
+#define EQ	0
+#define NE	1
+#define LT	2
+#define GT	3
+#define LE	4
+#define GE	5
+
+struct op_tbl_s {
+	char	*op;		/* operator string */
+	int	opcode;		/* internal representation of opcode */
+};
+
+typedef struct op_tbl_s op_tbl_t;
+
+op_tbl_t op_table [] = {
+	{ "-lt", LT },
+	{ "<"  , LT },
+	{ "-gt", GT },
+	{ ">"  , GT },
+	{ "-eq", EQ },
+	{ "==" , EQ },
+	{ "-ne", NE },
+	{ "!=" , NE },
+	{ "<>" , NE },
+	{ "-ge", GE },
+	{ ">=" , GE },
+	{ "-le", LE },
+	{ "<=" , LE },
+};
+
+#define op_tbl_size (sizeof(op_table)/sizeof(op_table[0]))
+
+extern int cmd_get_data_size(char* arg, int default_size);
+
+static long evalexp(char *s, int w)
+{
+	long l, *p;
+
+	/* if the parameter starts with a * then assume is a pointer to the value we want */
+	if (s[0] == '*') {
+		p = (long *)simple_strtoul(&s[1], NULL, 16);
+		l = *p;
+	} else {
+		l = simple_strtoul(s, NULL, 16);
+	}
+
+	return (l & ((1 << (w * 8)) - 1));
+}
+
+static char * evalstr(char *s)
+{
+	/* if the parameter starts with a * then assume a string pointer else its a literal */
+	if (s[0] == '*') {
+		return (char *)simple_strtoul(&s[1], NULL, 16);
+	} else {
+		return s;
+	}
+}
+
+static int stringcomp(char *s, char *t, int op)
+{
+	int n, p;
+	char *l, *r;
+
+	l = evalstr(s);
+	r = evalstr(t);
+
+	/* we'll do a compare based on the length of the shortest string */
+	n = min(strlen(l), strlen(r));
+
+	p = strncmp(l, r, n);
+	switch (op) {
+	case EQ: return (p == 0);
+	case NE: return (p != 0);
+	case LT: return (p < 0);
+	case GT: return (p > 0);
+	case LE: return (p <= 0);
+	case GE: return (p >= 0);
+	}
+	return (0);
+}
+
+static int arithcomp (char *s, char *t, int op, int w)
+{
+	long l, r;
+
+	l = evalexp (s, w);
+	r = evalexp (t, w);
+
+	switch (op) {
+	case EQ: return (l == r);
+	case NE: return (l != r);
+	case LT: return (l < r);
+	case GT: return (l > r);
+	case LE: return (l <= r);
+	case GE: return (l >= r);
+	}
+	return (0);
+}
+
+int binary_test (char *op, char *arg1, char *arg2, int w)
+{
+	int len, i;
+	op_tbl_t *optp;
+
+	len = strlen(op);
+
+	for (optp = (op_tbl_t *)&op_table, i = 0;
+	     i < op_tbl_size;
+	     optp++, i++) {
+
+		if ((strncmp (op, optp->op, len) == 0) && (len == strlen (optp->op))) {
+			if (w == 0) {
+				return (stringcomp(arg1, arg2, optp->opcode));
+			} else {
+				return (arithcomp (arg1, arg2, optp->opcode, w));
+			}
+		}
+	}
+
+	printf("Unknown operator '%s'\n", op);
+	return 0;	/* op code not found */
+}
+
+/* command line interface to the shell test */
+int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
+{
+        int	value, w;
+
+        /* Validate arguments */
+        if ((argc != 4)){
+		printf("Usage:\n%s\n", cmdtp->usage);
+        	return 1;
+        }
+
+	/* Check for a data width specification.
+	 * Defaults to long (4) if no specification.
+	 * Uses -2 as 'width' for .s (string) so as not to upset existing code
+	 */
+	switch (w = cmd_get_data_size(argv[0], 4)) {
+	case 1:
+	case 2:
+	case 4:
+		value = binary_test (argv[2], argv[1], argv[3], w);
+		break;
+	case -2:
+		value = binary_test (argv[2], argv[1], argv[3], 0);
+		break;
+	case -1:
+	default:
+		puts("Invalid data width specifier\n");
+		value = 0;
+		break;
+	}
+
+	return !value;
+}
+
+U_BOOT_CMD(
+	itest, 4, 0, do_itest,
+	"itest   - return true/false on integer compare\n",
+	"[.b, .w, .l, .s] [*]value1 <op> [*]value2\n"
+);
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 6ccad70..0a5cca9 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -53,6 +53,8 @@ int cmd_get_data_size(char* arg, int default_size)
 			return 2;
 		case 'l':
 			return 4;
+		case 's':
+			return -2;
 		default:
 			return -1;
 		}
diff --git a/common/hush.c b/common/hush.c
index 7e8a80d..4712adc 100644
--- a/common/hush.c
+++ b/common/hush.c
@@ -2173,7 +2173,7 @@ static int set_local_var(const char *s, int flg_export)
 #ifdef __U_BOOT__
 	if (getenv(name) != NULL) {
 		printf ("ERROR: "
-				"There is a global environmet variable with the same name.\n");
+				"There is a global environment variable with the same name.\n");
 		return -1;
 	}
 #endif
diff --git a/cpu/arm720t/Makefile b/cpu/arm720t/Makefile
index 8c950da..f273d92 100644
--- a/cpu/arm720t/Makefile
+++ b/cpu/arm720t/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(CPU).a
 
 START	= start.o
-OBJS	= serial.o interrupts.o cpu.o
+OBJS	= serial.o serial_netarm.o interrupts.o cpu.o
 
 all:	.depend $(START) $(LIB)
 
diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c
index 5637eb6..0ad5481 100644
--- a/cpu/arm720t/cpu.c
+++ b/cpu/arm720t/cpu.c
@@ -106,7 +106,9 @@ int cleanup_before_linux (void)
 	unsigned long i;
 
 	disable_interrupts ();
-
+#ifdef CONFIG_NETARM
+	return 0;
+#endif
 	/* turn off I-cache */
 	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
 	i &= ~0x1000;
diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c
index b1ee188..0291193 100644
--- a/cpu/arm720t/interrupts.c
+++ b/cpu/arm720t/interrupts.c
@@ -30,14 +30,24 @@
 #include <clps7111.h>
 
 #include <asm/proc-armv/ptrace.h>
+#ifdef CONFIG_NETARM
+#include <asm/arch/netarm_registers.h>
+#endif
 
 extern void reset_cpu(ulong addr);
 
+#ifndef CONFIG_NETARM
 /* we always count down the max. */
 #define TIMER_LOAD_VAL 0xffff
-
 /* macro to read the 16 bit timer */
 #define READ_TIMER (IO_TC1D & 0xffff)
+#else
+#define IRQEN	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_INTR_ENABLE))
+#define TM2CTRL	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL))
+#define TM2STAT	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_STATUS))
+#define TIMER_LOAD_VAL NETARM_GEN_TSTAT_CTC_MASK
+#define READ_TIMER (TM2STAT & NETARM_GEN_TSTAT_CTC_MASK)
+#endif
 
 #ifdef CONFIG_USE_IRQ
 /* enable IRQ/FIQ interrupts */
@@ -177,6 +187,18 @@ static ulong lastdec;
 
 int interrupt_init (void)
 {
+#ifdef CONFIG_NETARM
+        /* disable all interrupts */
+	IRQEN = 0;
+
+	/* operate timer 2 in non-prescale mode */
+	TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CFG_HZ) |
+		    NETARM_GEN_TCTL_ENABLE |
+		    NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL));
+
+	/* set timer 2 counter */
+	lastdec = TIMER_LOAD_VAL;
+#else
 	/* disable all interrupts */
 	IO_INTMR1 = 0;
 
@@ -188,6 +210,7 @@ int interrupt_init (void)
 
 	/* set timer 1 counter */
 	lastdec = IO_TC1D = TIMER_LOAD_VAL;
+#endif
 	timestamp = 0;
 
 	return (0);
diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c
index d38ac39..5c6a0cc 100644
--- a/cpu/arm720t/serial.c
+++ b/cpu/arm720t/serial.c
@@ -31,6 +31,8 @@
 #include <common.h>
 #include <clps7111.h>
 
+#ifndef CONFIG_NETARM
+
 void serial_setbrg (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -124,3 +126,5 @@ serial_puts (const char *s)
 		serial_putc (*s++);
 	}
 }
+
+#endif /* CONFIG_NETARM */
diff --git a/cpu/arm720t/serial_netarm.c b/cpu/arm720t/serial_netarm.c
new file mode 100644
index 0000000..8cfe049
--- /dev/null
+++ b/cpu/arm720t/serial_netarm.c
@@ -0,0 +1,185 @@
+/*
+ * Serial Port stuff - taken from Linux
+ *
+ * (C) Copyright 2002
+ * MAZeT GmbH <www.mazet.de>
+ * Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
+ *
+ * (c) 2004
+ * IMMS gGmbH <www.imms.de>
+ * Thomas Elste <info@elste.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/netarm_registers.h>
+
+#ifdef CONFIG_NETARM
+
+#define PORTA	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA))
+#define PORTB	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB))
+
+/* wait until transmitter is ready for another character */
+#define TXWAITRDY(registers) 							\
+{										\
+	ulong tmo = get_timer(0) + 1 * CFG_HZ;					\
+	while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 )	{	\
+		if (get_timer(0) > tmo)						\
+			break;							\
+	}									\
+}
+
+
+volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(0);
+volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(1);
+
+extern void _netarm_led_FAIL1(void);
+
+/*
+ * Setup both serial i/f with given baudrate
+ */
+void serial_setbrg (void)
+{
+	/* get the gd pointer */
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* set 0 ... make sure pins are configured for serial */
+	PORTA = PORTB =
+		NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
+
+	/* first turn em off */
+	serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = 0;
+
+	/* clear match register, we don't need it */
+	serial_reg_ch1->rx_match = serial_reg_ch2->rx_match = 0;
+
+	/* setup bit rate generator and rx buffer gap timer (1 byte only) */
+	if ((gd->baudrate >= MIN_BAUD_RATE)
+	    && (gd->baudrate <= MAX_BAUD_RATE)) {
+		serial_reg_ch1->bitrate = serial_reg_ch2->bitrate =
+			NETARM_SER_BR_X16 (gd->baudrate);
+		serial_reg_ch1->rx_buf_timer = serial_reg_ch2->rx_buf_timer =
+			0;
+		serial_reg_ch1->rx_char_timer = serial_reg_ch2->rx_char_timer =
+			NETARM_SER_RXGAP (gd->baudrate);
+	} else {
+		hang ();
+	}
+
+	/* setup port mode */
+	serial_reg_ch1->ctrl_b = serial_reg_ch2->ctrl_b =
+		( NETARM_SER_CTLB_RCGT_EN |
+		  NETARM_SER_CTLB_UART_MODE);
+	serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a =
+		( NETARM_SER_CTLA_ENABLE |
+		  NETARM_SER_CTLA_P_NONE |
+		  /* see errata */
+		  NETARM_SER_CTLA_2STOP |
+		  NETARM_SER_CTLA_8BITS |
+		  NETARM_SER_CTLA_DTR_EN |
+		  NETARM_SER_CTLA_RTS_EN);
+}
+
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ */
+int serial_init (void)
+{
+	serial_setbrg ();
+	return 0;
+}
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+	volatile unsigned char *fifo;
+
+	/* If \n, also do \r */
+	if (c == '\n')
+		serial_putc ('\r');
+
+	fifo = (volatile unsigned char *) &(serial_reg_ch1->fifo);
+	TXWAITRDY (serial_reg_ch1);
+	*fifo = c;
+}
+
+/*
+ * Test of a single byte from the serial port. Returns 1 on success, 0
+ * otherwise.
+ */
+int serial_tstc(void)
+{
+	return serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY;
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise.
+ */
+int serial_getc (void)
+{
+	unsigned int ch_uint;
+	volatile unsigned int *fifo;
+	volatile unsigned char *fifo_char = NULL;
+	int buf_count = 0;
+
+	while (!(serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY))
+		/* NOP */ ;
+
+	fifo = (volatile unsigned int *) &(serial_reg_ch1->fifo);
+	fifo_char = (unsigned char *) &ch_uint;
+	ch_uint = *fifo;
+
+	buf_count = NETARM_SER_STATA_RXFDB (serial_reg_ch1->status_a);
+	switch (buf_count) {
+	case NETARM_SER_STATA_RXFDB_4BYTES:
+		buf_count = 4;
+		break;
+	case NETARM_SER_STATA_RXFDB_3BYTES:
+		buf_count = 3;
+		break;
+	case NETARM_SER_STATA_RXFDB_2BYTES:
+		buf_count = 2;
+		break;
+	case NETARM_SER_STATA_RXFDB_1BYTES:
+		buf_count = 1;
+		break;
+	default:
+		/* panic, be never here */
+	}
+
+	serial_reg_ch1->status_a |= NETARM_SER_STATA_RX_CLOSED;
+
+	return ch_uint & 0xff;
+}
+
+void serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
+
+#endif /* CONFIG_NETARM */
diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S
index 7fe36c6..791049a 100644
--- a/cpu/arm720t/start.S
+++ b/cpu/arm720t/start.S
@@ -26,7 +26,9 @@
 
 #include <config.h>
 #include <version.h>
-
+#ifdef CONFIG_NETARM
+#include <asm/arch/netarm_registers.h>
+#endif
 
 /*
  *************************************************************************
@@ -195,6 +197,7 @@ SYSCON3:	.word	0x80002200
 #define CLKCTL_73      0x6  /* 73.728 MHz */
 
 cpu_init_crit:
+#ifndef CONFIG_NETARM
 	/*
 	 * mask all IRQs by clearing all bits in the INTMRs
 	 */
@@ -221,6 +224,54 @@ cpu_init_crit:
 	bic	r0, r0, #0x0000008f	@ clear bits 7, 3:0 (B--- WCAM)
 	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
 	mcr	p15,0,r0,c1,c0
+#else /* CONFIG_NETARM */
+	/*
+	 * prior to software reset : need to set pin PORTC4 to be *HRESET
+	 */
+	ldr	r0, =NETARM_GEN_MODULE_BASE
+	ldr	r1, =(NETARM_GEN_PORT_MODE(0x10) | \
+			NETARM_GEN_PORT_DIR(0x10))
+	str	r1, [r0, #+NETARM_GEN_PORTC]
+	/*
+	 * software reset : see HW Ref. Guide 8.2.4 : Software Service register
+	 *                  for an explanation of this process
+	 */
+	ldr	r0, =NETARM_GEN_MODULE_BASE
+	ldr	r1, =NETARM_GEN_SW_SVC_RESETA
+	str	r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
+	ldr	r1, =NETARM_GEN_SW_SVC_RESETB
+	str	r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
+	ldr	r1, =NETARM_GEN_SW_SVC_RESETA
+	str	r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
+	ldr	r1, =NETARM_GEN_SW_SVC_RESETB
+	str	r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
+	/*
+	 * setup PLL and System Config
+	 */
+	ldr	r0, =NETARM_GEN_MODULE_BASE
+
+	ldr	r1, =(	NETARM_GEN_SYS_CFG_LENDIAN | \
+			NETARM_GEN_SYS_CFG_BUSFULL | \
+			NETARM_GEN_SYS_CFG_USER_EN | \
+			NETARM_GEN_SYS_CFG_ALIGN_ABORT | \
+			NETARM_GEN_SYS_CFG_BUSARB_INT | \
+			NETARM_GEN_SYS_CFG_BUSMON_EN )
+
+	str	r1, [r0, #+NETARM_GEN_SYSTEM_CONTROL]
+
+	ldr	r1, =(	NETARM_GEN_PLL_CTL_PLLCNT(NETARM_PLL_COUNT_VAL) | \
+			NETARM_GEN_PLL_CTL_POLTST_DEF | \
+			NETARM_GEN_PLL_CTL_INDIV(1) | \
+			NETARM_GEN_PLL_CTL_ICP_DEF | \
+			NETARM_GEN_PLL_CTL_OUTDIV(2) )
+	str	r1, [r0, #+NETARM_GEN_PLL_CONTROL]
+	/*
+	 * mask all IRQs by clearing all bits in the INTMRs
+	 */
+	mov	r1, #0
+	ldr	r0, =NETARM_GEN_MODULE_BASE
+	str	r1, [r0, #+NETARM_GEN_INTR_ENABLE]
+#endif /* CONFIG_NETARM */
 
 #ifdef CONFIG_ARM7_REVD
 	/* set clock speed */
@@ -415,6 +466,7 @@ fiq:
 	.align	5
 .globl reset_cpu
 reset_cpu:
+#ifndef CONFIG_NETARM
 	mov     ip, #0
 	mcr     p15, 0, ip, c7, c7, 0           @ invalidate cache
 	mcr     p15, 0, ip, c8, c7, 0           @ flush TLB (v4)
@@ -423,3 +475,21 @@ reset_cpu:
 	bic     ip, ip, #0x2100                 @ ..v....s........
 	mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
 	mov     pc, r0
+#else
+	ldr	r1, =NETARM_MEM_MODULE_BASE
+	ldr	r0, [r1, #+NETARM_MEM_CS0_BASE_ADDR]
+	ldr	r1, =0xFFFFF000
+	and	r0, r1, r0
+	ldr	r1, =(relocate-TEXT_BASE)
+	add	r0, r1, r0
+	ldr	r4, =NETARM_GEN_MODULE_BASE
+	ldr	r1, =NETARM_GEN_SW_SVC_RESETA
+	str	r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
+	ldr	r1, =NETARM_GEN_SW_SVC_RESETB
+	str	r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
+	ldr	r1, =NETARM_GEN_SW_SVC_RESETA
+	str	r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
+	ldr	r1, =NETARM_GEN_SW_SVC_RESETB
+	str	r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
+	mov	pc, r0
+#endif
diff --git a/doc/README.commands.itest b/doc/README.commands.itest
new file mode 100644
index 0000000..db54160
--- /dev/null
+++ b/doc/README.commands.itest
@@ -0,0 +1,16 @@
+A slow day today so here is a revised itest command with provisional 
+support for comparing strings as well :-))
+
+Now table driven to allow the operators
+-eq, -ne, -lt, -gt, -le, -ge, ==, !=, <>, <, >, <=, >=
+
+Uses the expected command modifier for integer compares of width 1, 2 or 
+4 bytes of .b, .w, .l and the new modifer of .s for a string compare. 
+String comparison is over the length of the shorter, this hopefully 
+avoids missing terminators when using an indirect pointer.
+
+eg.
+if itest.l *40000 == 12345678 then; ....
+if itest.w *40000 != 1234 then; ....
+if itest.b *40000 >= 12 then; ....
+if itest.s *40000 -eq hello then; ....
diff --git a/doc/README.modnet50 b/doc/README.modnet50
new file mode 100644
index 0000000..de7165c
--- /dev/null
+++ b/doc/README.modnet50
@@ -0,0 +1,62 @@
+U-BOOT Port for FSForth ModNET50 Board
+--------------------------------------
+
+author: Thomas Elste <info@elste.org>
+        IMMS gGmbH <www.imms.de>
+
+The port based upon an early (partial complete)
+armboot-port from Stephan Linz for the ModNET50 Board.
+
+
+Overview:
+
+- board with Netsilicon NET+50 ARM7TDMI CPU without MMU
+- 16 MB SDRAM
+- 2 MB Flash (MBL29LV160BE)
+- 10/100 Ethernet PHY (LXT971A)
+
+
+Current Configuration (include/configs/modnet50.h):
+
+Memory Map: 0x00000000 - 0x00FFFFFF 16M SDRAM
+            0x10000000 - 0x101FFFFF  2M Flash
+
+The Flash uses a BB-Architectur with 35 sectors
+(0:16K; 1,2:8K; 3:32K; 4-34:64K). U-Boot is located in
+the first 5 sectors.
+
+The environment is located at the end of the 4th Flash
+sector (0x1001C000-0x1001FFFF).
+
+Build:
+
+U-boot should be build by using the ELDK Toolchain (arm-linux-*).
+
+	make modnet50_config
+	make
+
+
+Status:
+
+Everything seems to work fine. Booting images was tested by
+booting uCLinux (with and without a separate ramdisk image) from
+flash.
+
+
+Files:
+
+cpu/arm720t/serial_netarm.c .. serial I/O for the cpu
+
+board/modnet50/memsetup.S   .. memory setup for ModNET50
+board/modnet50/flash.c      .. flash routines
+board/modnet50/modnet50.c   .. some board init stuff
+
+drivers/netarm_eth.c        .. ethernet driver for the NET+50 CPU
+drivers/netarm_eth.h        .. header for ethernet driver
+
+include/configs/modnet50.h  .. configuration file for ModNET50
+
+include/netarm_*.h          .. register and macro definitions for
+                               the NETARM CPU family
+
+doc/README.modnet50         .. this readme
diff --git a/drivers/Makefile b/drivers/Makefile
index 2999eb4..b333aed 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -32,24 +32,16 @@ OBJS	= 3c589.o 5701rls.o ali512x.o \
 	  cs8900.o ct69000.o dataflash.o dc2114x.o          \
 	  e1000.o eepro100.o \
 	  i8042.o i82365.o inca-ip_sw.o \
-	  lan91c96.o             natsemi.o \
+	  lan91c96.o natsemi.o netarm_eth.o \
 	  ns16550.o ns8382x.o ns87308.o \
 	  pci.o pci_auto.o pci_indirect.o \
 	  pcnet.o plb2800_eth.o \
 	  ps2ser.o ps2mult.o pc_keyb.o keyboard.o \
 	  rtl8019.o rtl8139.o \
-	  s3c24x0_i2c.o sed13806.o serial.o \
-	  serial_max3100.o \
-	  smc91111.o smiLynxEM.o              sym53c8xx.o \
-	  status_led.o \
+	  s3c24x0_i2c.o sed13806.o serial.o serial_max3100.o \
+	  smc91111.o smiLynxEM.o status_led.o sym53c8xx.o \
 	  ti_pci1410a.o tigon3.o w83c553f.o
 
-## Disabled for now:
-##	  cs8900.o ct69000.o dataflash.o dc2114x.o ds1722.o \
-##	  lan91c96.o mw_eeprom.o natsemi.o \
-##	  smc91111.o smiLynxEM.o spi_eeprom.o sym53c8xx.o \
-##
-
 all:	$(LIB)
 
 $(LIB):	$(OBJS)
diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c
index c6c2751..95179ae 100644
--- a/drivers/cfi_flash.c
+++ b/drivers/cfi_flash.c
@@ -36,13 +36,14 @@
  *
  * Tested Architectures
  * Port Width  Chip Width    # of banks	   Flash Chip  Board
- * 32	       16	     1		   23F128J3    seranoa/eagle
- * 64	       16	     1		   23F128J3    seranoa/falcon
+ * 32	       16	     1		   28F128J3    seranoa/eagle
+ * 64	       16	     1		   28F128J3    seranoa/falcon
  *
  */
 
 /* The DEBUG define must be before common to enable debugging */
-#undef	DEBUG
+/* #define DEBUG	*/
+
 #include <common.h>
 #include <asm/processor.h>
 #ifdef	CFG_FLASH_CFI_DRIVER
diff --git a/drivers/netarm_eth.c b/drivers/netarm_eth.c
new file mode 100644
index 0000000..a15b653
--- /dev/null
+++ b/drivers/netarm_eth.c
@@ -0,0 +1,359 @@
+/*
+ * Copyright (C) 2004 IMMS gGmbH <www.imms.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * author(s): Thomas Elste, <info@elste.org>
+ *            (some parts derived from uCLinux Netarm Ethernet Driver)
+ */
+
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include "netarm_eth.h"
+#include <asm/arch/netarm_registers.h>
+
+#ifdef CONFIG_DRIVER_NETARMETH
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+
+static int na_mii_poll_busy (void);
+
+static void na_get_mac_addr (void)
+{
+	unsigned short p[3];
+	char *m_addr;
+	char ethaddr[20];
+
+	m_addr = (char *) p;
+
+	p[0] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_1);
+	p[1] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_2);
+	p[2] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_3);
+
+	sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
+		 m_addr[0], m_addr[1],
+		 m_addr[2], m_addr[3], m_addr[4], m_addr[5]);
+
+	printf ("HW-MAC Address:  %s\n", ethaddr);
+
+	/* set env, todo: check if already an adress is set */
+	setenv ("ethaddr", ethaddr);
+}
+
+
+static void na_mii_write (int reg, int value)
+{
+	int mii_addr;
+
+	/* Select register */
+	mii_addr = CFG_ETH_PHY_ADDR + reg;
+	SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
+	/* Write value */
+	SET_EADDR (NETARM_ETH_MII_WRITE, value);
+	na_mii_poll_busy ();
+}
+
+static unsigned int na_mii_read (int reg)
+{
+	int mii_addr, val;
+
+	/* Select register */
+	mii_addr = CFG_ETH_PHY_ADDR + reg;
+	SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
+	/* do one management cycle */
+	SET_EADDR (NETARM_ETH_MII_CMD,
+		   GET_EADDR (NETARM_ETH_MII_CMD) | NETARM_ETH_MIIC_RSTAT);
+	na_mii_poll_busy ();
+	/* Return read value */
+	val = GET_EADDR (NETARM_ETH_MII_READ);
+	return val;
+}
+
+static int na_mii_poll_busy (void)
+{
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+	while (get_timer_masked () < NA_MII_POLL_BUSY_DELAY) {
+		if (!(GET_EADDR (NETARM_ETH_MII_IND) & NETARM_ETH_MIII_BUSY)) {
+			return 1;
+		}
+	}
+	printf ("na_mii_busy timeout\n");
+	return (0);
+}
+
+static int na_mii_identify_phy (void)
+{
+	int id_reg_a = 0;
+
+	/* get phy id register */
+	id_reg_a = na_mii_read (MII_PHY_ID);
+
+	if (id_reg_a == 0x0043) {
+		/* This must be an Enable or a Lucent LU3X31 PHY chip */
+		return 1;
+	} else if (id_reg_a == 0x0013) {
+		/* it is an Intel LXT971A */
+		return 1;
+	}
+	return (0);
+}
+
+static int na_mii_negotiate (void)
+{
+	int i = 0;
+
+	/* Enable auto-negotiation */
+	na_mii_write (MII_PHY_AUTONEGADV, 0x01e1);
+	/* FIXME: 0x01E1 is 100Mb half and full duplex, 0x0061 is 10Mb only */
+	/* Restart auto-negotiation */
+	na_mii_write (MII_PHY_CONTROL, 0x1200);
+
+	/* status register is 0xffff after setting the autoneg restart bit */
+	while (na_mii_read (MII_PHY_STATUS) == 0xffff) {
+		i++;
+	}
+
+	/* na_mii_read uses the timer already, so we can't use it again for
+	   timeout checking.
+	   Instead we just try some times.
+	 */
+	for (i = 0; i < 40000; i++) {
+		if ((na_mii_read (MII_PHY_STATUS) & 0x0024) == 0x0024) {
+			return 0;
+		}
+	}
+	/*
+	   printf("*Warning* autonegotiation timeout, status: 0x%x\n",na_mii_read(MII_PHY_STATUS));
+	 */
+	return (1);
+}
+
+static unsigned int na_mii_check_speed (void)
+{
+	unsigned int status;
+
+	/* Read Status register */
+	status = na_mii_read (MII_PHY_STATUS);
+	/* Check link status.  If 0, default to 100 Mbps. */
+	if ((status & 0x0004) == 0) {
+		printf ("*Warning* no link detected, set default speed to 100Mbs\n");
+		return 1;
+	} else {
+		if ((na_mii_read (17) & 0x4000) != 0) {
+			printf ("100Mbs link detected\n");
+			return 1;
+		} else {
+			printf ("10Mbs link detected\n");
+			return 0;
+		}
+	}
+	return 0;
+}
+
+static int reset_eth (void)
+{
+	int pt;
+
+	na_get_mac_addr ();
+	pt = na_mii_identify_phy ();
+
+	/* reset the phy */
+	na_mii_write (MII_PHY_CONTROL, 0x8000);
+	reset_timer_masked ();
+	while (get_timer_masked () < NA_MII_NEGOTIATE_DELAY) {
+		if ((na_mii_read (MII_PHY_STATUS) & 0x8000) == 0) {
+			break;
+		}
+	}
+	if (get_timer_masked () >= NA_MII_NEGOTIATE_DELAY)
+		printf ("phy reset timeout\n");
+
+	/* set the PCS reg */
+	SET_EADDR (NETARM_ETH_PCS_CFG, NETARM_ETH_PCSC_CLKS_25M |
+		   NETARM_ETH_PCSC_ENJAB | NETARM_ETH_PCSC_NOCFR);
+
+	na_mii_negotiate ();
+	na_mii_check_speed ();
+
+	/* Delay 10 millisecond.  (Maybe this should be 1 second.) */
+	udelay (10000);
+
+	/* Turn receive on.
+	   Enable statistics register autozero on read.
+	   Do not insert MAC address on transmit.
+	   Do not enable special test modes.  */
+	SET_EADDR (NETARM_ETH_STL_CFG,
+		   (NETARM_ETH_STLC_AUTOZ | NETARM_ETH_STLC_RXEN));
+
+	/* Set the inter-packet gap delay to 0.96us for MII.
+	   The NET+ARM H/W Reference Guide indicates that the Back-to-back IPG
+	   Gap Timer Register should be set to 0x15 and the Non Back-to-back IPG
+	   Gap Timer Register should be set to 0x00000C12 for the MII PHY. */
+	SET_EADDR (NETARM_ETH_B2B_IPG_GAP_TMR, 0x15);
+	SET_EADDR (NETARM_ETH_NB2B_IPG_GAP_TMR, 0x00000C12);
+
+	/* Add CRC to end of packets.
+	   Pad packets to minimum length of 64 bytes.
+	   Allow unlimited length transmit packets.
+	   Receive all broadcast packets.
+	   NOTE:  Multicast addressing is NOT enabled here currently. */
+	SET_EADDR (NETARM_ETH_MAC_CFG,
+		   (NETARM_ETH_MACC_CRCEN |
+		    NETARM_ETH_MACC_PADEN | NETARM_ETH_MACC_HUGEN));
+	SET_EADDR (NETARM_ETH_SAL_FILTER, NETARM_ETH_SALF_BROAD);
+
+	/* enable fifos */
+	SET_EADDR (NETARM_ETH_GEN_CTRL,
+		   (NETARM_ETH_GCR_ERX | NETARM_ETH_GCR_ETX));
+
+	return (0);
+}
+
+
+extern int eth_init (bd_t * bd)
+{
+	reset_eth ();
+	return 0;
+}
+
+extern void eth_halt (void)
+{
+	SET_EADDR (NETARM_ETH_GEN_CTRL, 0);
+}
+
+/* Get a data block via Ethernet */
+extern int eth_rx (void)
+{
+	int i;
+	unsigned short rxlen;
+	unsigned int *addr;
+	unsigned int rxstatus, lastrxlen;
+	char *pa;
+
+	/* RXBR is 1, data block was received */
+	if ((GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXBR) == 0)
+		return 0;
+
+	/* get status register and the length of received block */
+	rxstatus = GET_EADDR (NETARM_ETH_RX_STAT);
+	rxlen = (rxstatus & NETARM_ETH_RXSTAT_SIZE) >> 16;
+
+	if (rxlen == 0)
+		return 0;
+
+	/* clear RXBR to make fifo available */
+	SET_EADDR (NETARM_ETH_GEN_STAT,
+		   GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_RXBR);
+
+	/* clear TXBC to make fifo available */
+	/* According to NETARM50 data manual you just have to clear
+	   RXBR but that has no effect. Only after clearing TXBC the
+	   Fifo becomes readable. */
+	SET_EADDR (NETARM_ETH_GEN_STAT,
+		   GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_TXBC);
+
+	addr = (unsigned int *) NetRxPackets[0];
+	pa = (char *) NetRxPackets[0];
+
+	/* read the fifo */
+	for (i = 0; i < rxlen / 4; i++) {
+		*addr = GET_EADDR (NETARM_ETH_FIFO_DAT1);
+		addr++;
+	}
+
+	if (GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXREGR) {
+		/* RXFDB indicates wether the last word is 1,2,3 or 4 bytes long */
+		lastrxlen =
+			(GET_EADDR (NETARM_ETH_GEN_STAT) &
+			 NETARM_ETH_GST_RXFDB) >> 28;
+		*addr = GET_EADDR (NETARM_ETH_FIFO_DAT1);
+		switch (lastrxlen) {
+		case 1:
+			*addr &= 0xff000000;
+			break;
+		case 2:
+			*addr &= 0xffff0000;
+			break;
+		case 3:
+			*addr &= 0xffffff00;
+			break;
+		}
+	}
+
+	/* Pass the packet up to the protocol layers. */
+	NetReceive (NetRxPackets[0], rxlen);
+
+	return rxlen;
+}
+
+/* Send a data block via Ethernet. */
+extern int eth_send (volatile void *packet, int length)
+{
+	int i, length32;
+	char *pa;
+	unsigned int *pa32, lastp = 0, rest;
+
+	pa = (char *) packet;
+	pa32 = (unsigned int *) packet;
+	length32 = length / 4;
+	rest = length % 4;
+
+	/* make sure there's no garbage in the last word */
+	switch (rest) {
+	case 0:
+		lastp = pa32[length32];
+		length32--;
+		break;
+	case 1:
+		lastp = pa32[length32] & 0x000000ff;
+		break;
+	case 2:
+		lastp = pa32[length32] & 0x0000ffff;
+		break;
+	case 3:
+		lastp = pa32[length32] & 0x00ffffff;
+		break;
+	}
+
+	/* write to the fifo */
+	for (i = 0; i < length32; i++)
+		SET_EADDR (NETARM_ETH_FIFO_DAT1, pa32[i]);
+
+	/* the last word is written to an extra register, this
+	   starts the transmission */
+	SET_EADDR (NETARM_ETH_FIFO_DAT2, lastp);
+
+	/* NETARM_ETH_TXSTAT_TXOK should be checked, to know if the transmission
+	   went fine. But we can't use the timer for a timeout loop because
+	   of it is used already in upper layers. So we just try some times. */
+	i = 0;
+	while (i < 50000) {
+		if ((GET_EADDR (NETARM_ETH_TX_STAT) & NETARM_ETH_TXSTAT_TXOK)
+		    == NETARM_ETH_TXSTAT_TXOK)
+			return 0;
+		i++;
+	}
+
+	printf ("eth_send timeout\n");
+	return 1;
+}
+
+#endif /* COMMANDS & CFG_NET */
+
+#endif /* CONFIG_DRIVER_NETARMETH */
diff --git a/drivers/netarm_eth.h b/drivers/netarm_eth.h
new file mode 100644
index 0000000..8edab82
--- /dev/null
+++ b/drivers/netarm_eth.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2003 IMMS gGmbH <www.imms.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * author(s): Thomas Elste, <info@elste.org>
+ */
+
+#include <asm/types.h>
+#include <config.h>
+
+#ifdef CONFIG_DRIVER_NETARMETH
+
+#define SET_EADDR(ad,val) *(volatile unsigned int*)(ad + NETARM_ETH_MODULE_BASE) = val
+#define GET_EADDR(ad) (*(volatile unsigned int*)(ad + NETARM_ETH_MODULE_BASE))
+
+#define NA_MII_POLL_BUSY_DELAY 900
+
+/* MII negotiation timeout value
+   500 jiffies = 5 seconds */
+#define NA_MII_NEGOTIATE_DELAY 30
+
+/* Registers in the physical layer chip */
+#define MII_PHY_CONTROL		0
+#define MII_PHY_STATUS		1
+#define MII_PHY_ID              2
+#define MII_PHY_AUTONEGADV	4
+
+#endif /* CONFIG_DRIVER_NETARMETH */
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index f02c404..daa7034 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -432,12 +432,13 @@ get_vfatname(fsdata *mydata, int curclust, __u8 *cluster,
 	dir_entry *realdent;
 	dir_slot  *slotptr = (dir_slot*) retdent;
 	__u8	  *nextclust = cluster + mydata->clust_size * SECTOR_SIZE;
-	__u8	   counter = slotptr->id & 0xf;
+	__u8	   counter = (slotptr->id & ~LAST_LONG_ENTRY_MASK) & 0xff;
 	int idx = 0;
 
 	while ((__u8*)slotptr < nextclust) {
 		if (counter == 0) break;
-		if ((slotptr->id & 0x0f) != counter) return -1;
+		if (((slotptr->id & ~LAST_LONG_ENTRY_MASK) & 0xff) != counter)
+			return -1;
 		slotptr++;
 		counter--;
 	}
@@ -475,7 +476,7 @@ get_vfatname(fsdata *mydata, int curclust, __u8 *cluster,
 	do {
 		slotptr--;
 		if (slot2str(slotptr, l_name, &idx)) break;
-	} while (!(slotptr->id & 0x40));
+	} while (!(slotptr->id & LAST_LONG_ENTRY_MASK));
 
 	l_name[idx] = '\0';
 	if (*l_name == DELETED_FLAG) *l_name = '\0';
@@ -536,7 +537,7 @@ static dir_entry *get_dentfromdir (fsdata * mydata, int startsect,
 	    if ((dentptr->attr & ATTR_VOLUME)) {
 #ifdef CONFIG_SUPPORT_VFAT
 		if ((dentptr->attr & ATTR_VFAT) &&
-		    (dentptr->name[0] & 0x40)) {
+		    (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) {
 		    prevcksum = ((dir_slot *) dentptr)
 			    ->alias_checksum;
 		    get_vfatname (mydata, curclust, get_dentfromdir_block,
@@ -799,7 +800,7 @@ do_fat_read (const char *filename, void *buffer, unsigned long maxsize,
 	    if ((dentptr->attr & ATTR_VOLUME)) {
 #ifdef CONFIG_SUPPORT_VFAT
 		if ((dentptr->attr & ATTR_VFAT) &&
-		    (dentptr->name[0] & 0x40)) {
+		    (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) {
 		    prevcksum = ((dir_slot *) dentptr)->alias_checksum;
 		    get_vfatname (mydata, 0, do_fat_read_block, dentptr, l_name);
 		    if (dols == LS_ROOT) {
diff --git a/include/asm-arm/arch-arm720t/netarm_dma_module.h b/include/asm-arm/arch-arm720t/netarm_dma_module.h
new file mode 100644
index 0000000..c517035
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/netarm_dma_module.h
@@ -0,0 +1,184 @@
+/*
+ * include/asm-armnommu/arch-netarm/netarm_dma_module.h
+ *
+ * Copyright (C) 2000 NETsilicon, Inc.
+ * Copyright (C) 2000 WireSpeed Communications Corporation
+ *
+ * This software is copyrighted by WireSpeed. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall WireSpeed
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : Joe deBlaquiere
+ *             David Smith
+ */
+
+#ifndef __NETARM_DMA_MODULE_REGISTERS_H
+#define __NETARM_DMA_MODULE_REGISTERS_H
+
+/* GEN unit register offsets */
+
+#define	NETARM_DMA_MODULE_BASE		(0xFF900000)
+
+#define get_dma_reg_addr(c) ((volatile unsigned int *)(NETARM_DMA_MODULE_BASE + (c)))
+
+#define	NETARM_DMA1A_BFR_DESCRPTOR_PTR	(0x00)
+#define	NETARM_DMA1A_CONTROL		(0x10)
+#define	NETARM_DMA1A_STATUS		(0x14)
+#define	NETARM_DMA1B_BFR_DESCRPTOR_PTR	(0x20)
+#define	NETARM_DMA1B_CONTROL		(0x30)
+#define	NETARM_DMA1B_STATUS		(0x34)
+#define	NETARM_DMA1C_BFR_DESCRPTOR_PTR	(0x40)
+#define	NETARM_DMA1C_CONTROL		(0x50)
+#define	NETARM_DMA1C_STATUS		(0x54)
+#define	NETARM_DMA1D_BFR_DESCRPTOR_PTR	(0x60)
+#define	NETARM_DMA1D_CONTROL		(0x70)
+#define	NETARM_DMA1D_STATUS		(0x74)
+
+#define	NETARM_DMA2_BFR_DESCRPTOR_PTR	(0x80)
+#define	NETARM_DMA2_CONTROL		(0x90)
+#define	NETARM_DMA2_STATUS		(0x94)
+
+#define	NETARM_DMA3_BFR_DESCRPTOR_PTR	(0xA0)
+#define	NETARM_DMA3_CONTROL		(0xB0)
+#define	NETARM_DMA3_STATUS		(0xB4)
+
+#define	NETARM_DMA4_BFR_DESCRPTOR_PTR	(0xC0)
+#define	NETARM_DMA4_CONTROL		(0xD0)
+#define	NETARM_DMA4_STATUS		(0xD4)
+
+#define	NETARM_DMA5_BFR_DESCRPTOR_PTR	(0xE0)
+#define	NETARM_DMA5_CONTROL		(0xF0)
+#define	NETARM_DMA5_STATUS		(0xF4)
+
+#define	NETARM_DMA6_BFR_DESCRPTOR_PTR	(0x100)
+#define	NETARM_DMA6_CONTROL		(0x110)
+#define	NETARM_DMA6_STATUS		(0x114)
+
+#define	NETARM_DMA7_BFR_DESCRPTOR_PTR	(0x120)
+#define	NETARM_DMA7_CONTROL		(0x130)
+#define	NETARM_DMA7_STATUS		(0x134)
+
+#define	NETARM_DMA8_BFR_DESCRPTOR_PTR	(0x140)
+#define	NETARM_DMA8_CONTROL		(0x150)
+#define	NETARM_DMA8_STATUS		(0x154)
+
+#define	NETARM_DMA9_BFR_DESCRPTOR_PTR	(0x160)
+#define	NETARM_DMA9_CONTROL		(0x170)
+#define	NETARM_DMA9_STATUS		(0x174)
+
+#define	NETARM_DMA10_BFR_DESCRPTOR_PTR	(0x180)
+#define	NETARM_DMA10_CONTROL		(0x190)
+#define	NETARM_DMA10_STATUS		(0x194)
+
+/* select bitfield defintions */
+
+/* DMA Control Register ( 0xFF90_0XX0 ) */
+
+#define NETARM_DMA_CTL_ENABLE		(0x80000000)
+
+#define NETARM_DMA_CTL_ABORT		(0x40000000)
+
+#define NETARM_DMA_CTL_BUS_100_PERCENT	(0x00000000)
+#define NETARM_DMA_CTL_BUS_75_PERCENT	(0x10000000)
+#define NETARM_DMA_CTL_BUS_50_PERCENT	(0x20000000)
+#define NETARM_DMA_CTL_BUS_25_PERCENT	(0x30000000)
+
+#define NETARM_DMA_CTL_BUS_MASK		(0x30000000)
+
+#define NETARM_DMA_CTL_MODE_FB_TO_MEM	(0x00000000)
+#define NETARM_DMA_CTL_MODE_FB_FROM_MEM	(0x04000000)
+#define NETARM_DMA_CTL_MODE_MEM_TO_MEM	(0x08000000)
+
+#define NETARM_DMA_CTL_BURST_NONE	(0x00000000)
+#define NETARM_DMA_CTL_BURST_8_BYTE	(0x01000000)
+#define NETARM_DMA_CTL_BURST_16_BYTE	(0x02000000)
+
+#define NETARM_DMA_CTL_BURST_MASK	(0x03000000)
+
+#define NETARM_DMA_CTL_SRC_INCREMENT	(0x00200000)
+
+#define NETARM_DMA_CTL_DST_INCREMENT	(0x00100000)
+
+/* these apply only to ext xfers on DMA 3 or 4 */
+
+#define NETARM_DMA_CTL_CH_3_4_REQ_EXT	(0x00800000)
+
+#define NETARM_DMA_CTL_CH_3_4_DATA_32	(0x00000000)
+#define NETARM_DMA_CTL_CH_3_4_DATA_16	(0x00010000)
+#define NETARM_DMA_CTL_CH_3_4_DATA_8	(0x00020000)
+
+#define NETARM_DMA_CTL_STATE(X)	((X) & 0xFC00)
+#define NETARM_DMA_CTL_INDEX(X)	((X) & 0x03FF)
+
+/* DMA Status Register ( 0xFF90_0XX4 ) */
+
+#define NETARM_DMA_STAT_NC_INTPEN	(0x80000000)
+#define NETARM_DMA_STAT_EC_INTPEN	(0x40000000)
+#define NETARM_DMA_STAT_NR_INTPEN	(0x20000000)
+#define NETARM_DMA_STAT_CA_INTPEN	(0x10000000)
+#define NETARM_DMA_STAT_INTPEN_MASK	(0xF0000000)
+
+#define NETARM_DMA_STAT_NC_INT_EN	(0x00800000)
+#define NETARM_DMA_STAT_EC_INT_EN	(0x00400000)
+#define NETARM_DMA_STAT_NR_INT_EN	(0x00200000)
+#define NETARM_DMA_STAT_CA_INT_EN	(0x00100000)
+#define NETARM_DMA_STAT_INT_EN_MASK	(0x00F00000)
+
+#define NETARM_DMA_STAT_WRAP		(0x00080000)
+#define NETARM_DMA_STAT_IDONE		(0x00040000)
+#define NETARM_DMA_STAT_LAST		(0x00020000)
+#define NETARM_DMA_STAT_FULL		(0x00010000)
+
+#define	NETARM_DMA_STAT_BUFLEN(X)	((X) & 0x7FFF)
+
+/* DMA Buffer Descriptor Word 0 bitfields. */
+
+#define NETARM_DMA_BD0_WRAP		(0x80000000)
+#define NETARM_DMA_BD0_IDONE		(0x40000000)
+#define NETARM_DMA_BD0_LAST		(0x20000000)
+#define NETARM_DMA_BD0_BUFPTR_MASK	(0x1FFFFFFF)
+
+/* DMA Buffer Descriptor Word 1 bitfields. */
+
+#define NETARM_DMA_BD1_STATUS_MASK	(0xFFFF0000)
+#define NETARM_DMA_BD1_FULL		(0x00008000)
+#define NETARM_DMA_BD1_BUFLEN_MASK	(0x00007FFF)
+
+#ifndef	__ASSEMBLER__
+
+typedef	struct __NETARM_DMA_Buff_Desc_FlyBy
+{
+	unsigned int word0;
+	unsigned int word1;
+} NETARM_DMA_Buff_Desc_FlyBy, *pNETARM_DMA_Buff_Desc_FlyBy ;
+
+typedef	struct __NETARM_DMA_Buff_Desc_M_to_M
+{
+	unsigned int word0;
+	unsigned int word1;
+	unsigned int word2;
+	unsigned int word3;
+} NETARM_DMA_Buff_Desc_M_to_M, *pNETARM_DMA_Buff_Desc_M_to_M ;
+
+#endif
+
+#endif
+
diff --git a/include/asm-arm/arch-arm720t/netarm_eni_module.h b/include/asm-arm/arch-arm720t/netarm_eni_module.h
new file mode 100644
index 0000000..317b354
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/netarm_eni_module.h
@@ -0,0 +1,121 @@
+/*
+ * include/asm-armnommu/arch-netarm/netarm_eni_module.h
+ *
+ * Copyright (C) 2000 NETsilicon, Inc.
+ * Copyright (C) 2000 WireSpeed Communications Corporation
+ *
+ * This software is copyrighted by WireSpeed. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall WireSpeed
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : David Smith
+ */
+
+#ifndef __NETARM_ENI_MODULE_REGISTERS_H
+#define __NETARM_ENI_MODULE_REGISTERS_H
+
+/* ENI unit register offsets */
+
+/* #ifdef CONFIG_ARCH_NETARM */
+#define	NETARM_ENI_MODULE_BASE		(0xFFA00000)
+/* #endif / * CONFIG_ARCH_NETARM */
+
+#define get_eni_reg_addr(c) ((volatile unsigned int *)(NETARM_ENI_MODULE_BASE + (c)))
+#define get_eni_ctl_reg_addr(minor) \
+	(get_eni_reg_addr(NETARM_ENI_1284_PORT1_CONTROL) + (minor))
+
+#define	NETARM_ENI_GENERAL_CONTROL	(0x00)
+#define	NETARM_ENI_STATUS_CONTROL	(0x04)
+#define	NETARM_ENI_FIFO_MODE_DATA	(0x08)
+
+#define	NETARM_ENI_1284_PORT1_CONTROL	(0x10)
+#define	NETARM_ENI_1284_PORT2_CONTROL	(0x14)
+#define	NETARM_ENI_1284_PORT3_CONTROL	(0x18)
+#define	NETARM_ENI_1284_PORT4_CONTROL	(0x1c)
+
+#define	NETARM_ENI_1284_CHANNEL1_DATA	(0x20)
+#define	NETARM_ENI_1284_CHANNEL2_DATA	(0x24)
+#define	NETARM_ENI_1284_CHANNEL3_DATA	(0x28)
+#define	NETARM_ENI_1284_CHANNEL4_DATA	(0x2c)
+
+#define	NETARM_ENI_ENI_CONTROL		(0x30)
+#define	NETARM_ENI_ENI_PULSED_INTR	(0x34)
+#define	NETARM_ENI_ENI_SHARED_RAM_ADDR	(0x38)
+#define	NETARM_ENI_ENI_SHARED		(0x3c)
+
+/* select bitfield defintions */
+
+/* General Control Register (0xFFA0_0000) */
+
+#define NETARM_ENI_GCR_ENIMODE_IEEE1284	(0x00000001)
+#define NETARM_ENI_GCR_ENIMODE_SHRAM16	(0x00000004)
+#define NETARM_ENI_GCR_ENIMODE_SHRAM8	(0x00000005)
+#define NETARM_ENI_GCR_ENIMODE_FIFO16	(0x00000006)
+#define NETARM_ENI_GCR_ENIMODE_FIFO8	(0x00000007)
+
+#define NETARM_ENI_GCR_ENIMODE_MASK	(0x00000007)
+
+/* IEEE 1284 Port Control Registers 1-4 (0xFFA0_0010, 0xFFA0_0014,
+   0xFFA0_0018, 0xFFA0_001c) */
+
+#define NETARM_ENI_1284PC_PORT_ENABLE	(0x80000000)
+#define NETARM_ENI_1284PC_DMA_ENABLE	(0x40000000)
+#define NETARM_ENI_1284PC_OBE_INT_EN	(0x20000000)
+#define NETARM_ENI_1284PC_ACK_INT_EN	(0x10000000)
+#define NETARM_ENI_1284PC_ECP_MODE	(0x08000000)
+#define NETARM_ENI_1284PC_LOOPBACK_MODE	(0x04000000)
+
+#define NETARM_ENI_1284PC_STROBE_TIME0	(0x00000000) /* 0.5 uS */
+#define NETARM_ENI_1284PC_STROBE_TIME1	(0x01000000) /* 1.0 uS */
+#define NETARM_ENI_1284PC_STROBE_TIME2	(0x02000000) /* 5.0 uS */
+#define NETARM_ENI_1284PC_STROBE_TIME3	(0x03000000) /* 10.0 uS */
+#define NETARM_ENI_1284PC_STROBE_MASK	(0x03000000)
+
+#define NETARM_ENI_1284PC_MAN_STROBE_EN	(0x00800000)
+#define NETARM_ENI_1284PC_FAST_MODE	(0x00400000)
+#define NETARM_ENI_1284PC_BIDIR_MODE	(0x00200000)
+
+#define NETARM_ENI_1284PC_MAN_STROBE	(0x00080000)
+#define NETARM_ENI_1284PC_AUTO_FEED	(0x00040000)
+#define NETARM_ENI_1284PC_INIT		(0x00020000)
+#define NETARM_ENI_1284PC_HSELECT	(0x00010000)
+#define NETARM_ENI_1284PC_FE_INT_EN	(0x00008000)
+#define NETARM_ENI_1284PC_EPP_MODE	(0x00004000)
+#define NETARM_ENI_1284PC_IBR_INT_EN	(0x00002000)
+#define NETARM_ENI_1284PC_IBR		(0x00001000)
+
+#define NETARM_ENI_1284PC_RXFDB_1BYTE	(0x00000400)
+#define NETARM_ENI_1284PC_RXFDB_2BYTE	(0x00000800)
+#define NETARM_ENI_1284PC_RXFDB_3BYTE	(0x00000c00)
+#define NETARM_ENI_1284PC_RXFDB_4BYTE	(0x00000000)
+
+#define NETARM_ENI_1284PC_RBCC		(0x00000200)
+#define NETARM_ENI_1284PC_RBCT		(0x00000100)
+#define NETARM_ENI_1284PC_ACK		(0x00000080)
+#define NETARM_ENI_1284PC_FIFO_E	(0x00000040)
+#define NETARM_ENI_1284PC_OBE		(0x00000020)
+#define NETARM_ENI_1284PC_ACK_INT	(0x00000010)
+#define NETARM_ENI_1284PC_BUSY		(0x00000008)
+#define NETARM_ENI_1284PC_PE		(0x00000004)
+#define NETARM_ENI_1284PC_PSELECT	(0x00000002)
+#define NETARM_ENI_1284PC_FAULT		(0x00000001)
+
+#endif /* __NETARM_ENI_MODULE_REGISTERS_H */
diff --git a/include/asm-arm/arch-arm720t/netarm_eth_module.h b/include/asm-arm/arch-arm720t/netarm_eth_module.h
new file mode 100644
index 0000000..8f2f369
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/netarm_eth_module.h
@@ -0,0 +1,160 @@
+/*
+ * include/asm-armnommu/arch-netarm/netarm_eth_module.h
+ *
+ * Copyright (C) 2000 NETsilicon, Inc.
+ * Copyright (C) 2000 WireSpeed Communications Corporation
+ *
+ * This software is copyrighted by WireSpeed. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall WireSpeed
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : Jackie Smith Cashion
+ *             David Smith
+ */
+
+#ifndef __NETARM_ETH_MODULE_REGISTERS_H
+#define __NETARM_ETH_MODULE_REGISTERS_H
+
+/* ETH unit register offsets */
+
+#define	NETARM_ETH_MODULE_BASE		(0xFF800000)
+
+#define get_eth_reg_addr(c) ((volatile unsigned int *)(NETARM_ETH_MODULE_BASE + (c)))
+
+#define NETARM_ETH_GEN_CTRL		(0x000) /* Ethernet Gen Control Reg */
+#define NETARM_ETH_GEN_STAT		(0x004) /* Ethernet Gen Status Reg */
+#define NETARM_ETH_FIFO_DAT1            (0x008) /* Fifo Data Reg 1 */
+#define NETARM_ETH_FIFO_DAT2            (0x00C) /* Fifo Data Reg 2 */
+#define NETARM_ETH_TX_STAT              (0x010) /* Transmit Status Reg */
+#define NETARM_ETH_RX_STAT              (0x014) /* Receive Status Reg */
+
+#define NETARM_ETH_MAC_CFG		(0x400) /* MAC Configuration Reg */
+#define NETARM_ETH_PCS_CFG		(0x408) /* PCS Configuration Reg */
+#define NETARM_ETH_STL_CFG		(0x410) /* STL Configuration Reg */
+#define NETARM_ETH_B2B_IPG_GAP_TMR	(0x440) /* Back-to-back IPG
+						   Gap Timer Reg */
+#define NETARM_ETH_NB2B_IPG_GAP_TMR	(0x444) /* Non Back-to-back
+						   IPG Gap Timer Reg */
+#define NETARM_ETH_MII_CMD		(0x540) /* MII (PHY) Command Reg */
+#define NETARM_ETH_MII_ADDR		(0x544) /* MII Address Reg */
+#define NETARM_ETH_MII_WRITE		(0x548) /* MII Write Data Reg */
+#define NETARM_ETH_MII_READ		(0x54C) /* MII Read Data Reg */
+#define NETARM_ETH_MII_IND		(0x550) /* MII Indicators Reg */
+#define NETARM_ETH_MIB_CRCEC		(0x580) /* (MIB) CRC Error Counter */
+#define NETARM_ETH_MIB_AEC		(0x584) /* Alignment Error Counter */
+#define NETARM_ETH_MIB_CEC		(0x588) /* Code Error Counter */
+#define NETARM_ETH_MIB_LFC		(0x58C) /* Long Frame Counter */
+#define NETARM_ETH_MIB_SFC		(0x590) /* Short Frame Counter */
+#define NETARM_ETH_MIB_LCC		(0x594) /* Late Collision Counter */
+#define NETARM_ETH_MIB_EDC		(0x598) /* Excessive Deferral
+						   Counter */
+#define NETARM_ETH_MIB_MCC		(0x59C) /* Maximum Collision Counter */
+#define NETARM_ETH_SAL_FILTER		(0x5C0) /* SAL Station Address
+						   Filter Reg */
+#define NETARM_ETH_SAL_STATION_ADDR_1	(0x5C4) /* SAL Station Address
+						   Reg */
+#define NETARM_ETH_SAL_STATION_ADDR_2	(0x5C8)
+#define NETARM_ETH_SAL_STATION_ADDR_3	(0x5CC)
+#define NETARM_ETH_SAL_HASH_TBL_1	(0x5D0) /* SAL Multicast Hash Table*/
+#define NETARM_ETH_SAL_HASH_TBL_2	(0x5D4)
+#define NETARM_ETH_SAL_HASH_TBL_3	(0x5D8)
+#define NETARM_ETH_SAL_HASH_TBL_4	(0x5DC)
+
+/* select bitfield defintions */
+
+/* Ethernet General Control Register (0xFF80_0000) */
+
+#define NETARM_ETH_GCR_ERX		(0x80000000) /* Enable Receive FIFO */
+#define NETARM_ETH_GCR_ERXDMA		(0x40000000) /* Enable Receive DMA */
+#define NETARM_ETH_GCR_ETX		(0x00800000) /* Enable Transmit FIFO */
+#define NETARM_ETH_GCR_ETXDMA		(0x00400000) /* Enable Transmit DMA */
+#define NETARM_ETH_GCR_ETXWM_50		(0x00100000) /* Transmit FIFO Water
+							Mark.  Start transmit
+							when FIFO is 50%
+							full. */
+#define NETARM_ETH_GCR_PNA		(0x00000400) /* pSOS pNA Buffer
+							Descriptor Format */
+
+/* Ethernet General Status Register (0xFF80_0004) */
+
+#define NETARM_ETH_GST_RXFDB            (0x30000000)
+#define NETARM_ETH_GST_RXREGR		(0x08000000) /* Receive Register
+							Ready */
+#define NETARM_ETH_GST_RXFIFOH		(0x04000000)
+#define NETARM_ETH_GST_RXBR		(0x02000000)
+#define NETARM_ETH_GST_RXSKIP		(0x01000000)
+
+#define NETARM_ETH_GST_TXBC             (0x00020000)
+
+
+/* Ethernet Transmit Status Register (0xFF80_0010) */
+
+#define NETARM_ETH_TXSTAT_TXOK          (0x00008000)
+
+
+/* Ethernet Receive Status Register (0xFF80_0014) */
+
+#define NETARM_ETH_RXSTAT_SIZE          (0xFFFF0000)
+#define NETARM_ETH_RXSTAT_RXOK          (0x00002000)
+
+
+/* PCS Configuration Register (0xFF80_0408) */
+
+#define NETARM_ETH_PCSC_NOCFR		(0x1) /* Disable Ciphering */
+#define NETARM_ETH_PCSC_ENJAB		(0x2) /* Enable Jabber Protection */
+#define NETARM_ETH_PCSC_CLKS_25M	(0x0) /* 25 MHz Clock Speed Select */
+#define NETARM_ETH_PCSC_CLKS_33M	(0x4) /* 33 MHz Clock Speed Select */
+
+/* STL Configuration Register (0xFF80_0410) */
+
+#define NETARM_ETH_STLC_RXEN		(0x2) /* Enable Packet Receiver */
+#define NETARM_ETH_STLC_AUTOZ		(0x4) /* Auto Zero Statistics */
+
+/* MAC Configuration Register (0xFF80_0400) */
+
+#define NETARM_ETH_MACC_HUGEN		(0x1) /* Enable Unlimited Transmit
+						 Frame Sizes */
+#define NETARM_ETH_MACC_PADEN		(0x4) /* Automatic Pad Fill Frames
+						 to 64 Bytes */
+#define NETARM_ETH_MACC_CRCEN		(0x8) /* Append CRC to Transmit
+						 Frames */
+
+/* MII (PHY) Command Register (0xFF80_0540) */
+
+#define NETARM_ETH_MIIC_RSTAT		(0x1) /* Single Scan for Read Data */
+
+/* MII Indicators Register (0xFF80_0550) */
+
+#define NETARM_ETH_MIII_BUSY		(0x1) /* MII I/F Busy with
+						 Read/Write */
+
+/* SAL Station Address Filter Register (0xFF80_05C0) */
+
+#define NETARM_ETH_SALF_PRO		(0x8) /* Enable Promiscuous Mode */
+#define NETARM_ETH_SALF_PRM		(0x4) /* Accept All Multicast
+						 Packets */
+#define NETARM_ETH_SALF_PRA		(0x2) /* Accept Mulitcast Packets
+						 using Hash Table */
+#define NETARM_ETH_SALF_BROAD		(0x1) /* Accept All Broadcast
+						 Packets */
+
+
+#endif /* __NETARM_GEN_MODULE_REGISTERS_H */
diff --git a/include/asm-arm/arch-arm720t/netarm_gen_module.h b/include/asm-arm/arch-arm720t/netarm_gen_module.h
new file mode 100644
index 0000000..6ab5cc1
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/netarm_gen_module.h
@@ -0,0 +1,170 @@
+/*
+ * include/asm-armnommu/arch-netarm/netarm_gen_module.h
+ *
+ * Copyright (C) 2000, 2001 NETsilicon, Inc.
+ * Copyright (C) 2000, 2001 Red Hat, Inc.
+ *
+ * This software is copyrighted by Red Hat. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall Red Hat
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : Joe deBlaquiere
+ */
+
+#ifndef __NETARM_GEN_MODULE_REGISTERS_H
+#define __NETARM_GEN_MODULE_REGISTERS_H
+
+/* GEN unit register offsets */
+
+#define	NETARM_GEN_MODULE_BASE		(0xFFB00000)
+
+#define get_gen_reg_addr(c) ((volatile unsigned int *)(NETARM_GEN_MODULE_BASE + (c)))
+
+#define	NETARM_GEN_SYSTEM_CONTROL	(0x00)
+#define	NETARM_GEN_STATUS_CONTROL	(0x04)
+#define	NETARM_GEN_PLL_CONTROL		(0x08)
+#define	NETARM_GEN_SOFTWARE_SERVICE	(0x0c)
+
+#define	NETARM_GEN_TIMER1_CONTROL	(0x10)
+#define	NETARM_GEN_TIMER1_STATUS	(0x14)
+#define	NETARM_GEN_TIMER2_CONTROL	(0x18)
+#define	NETARM_GEN_TIMER2_STATUS	(0x1c)
+
+#define	NETARM_GEN_PORTA		(0x20)
+#define	NETARM_GEN_PORTB		(0x24)
+#define	NETARM_GEN_PORTC		(0x28)
+
+#define	NETARM_GEN_INTR_ENABLE		(0x30)
+#define	NETARM_GEN_INTR_ENABLE_SET	(0x34)
+#define	NETARM_GEN_INTR_ENABLE_CLR	(0x38)
+#define	NETARM_GEN_INTR_STATUS_EN	(0x34)
+#define	NETARM_GEN_INTR_STATUS_RAW	(0x38)
+
+#define	NETARM_GEN_CACHE_CONTROL1	(0x40)
+#define	NETARM_GEN_CACHE_CONTROL2	(0x44)
+
+/* select bitfield definitions */
+
+/* System Control Register ( 0xFFB0_0000 ) */
+
+#define NETARM_GEN_SYS_CFG_LENDIAN	(0x80000000)
+#define NETARM_GEN_SYS_CFG_BENDIAN	(0x00000000)
+
+#define NETARM_GEN_SYS_CFG_BUSQRTR	(0x00000000)
+#define NETARM_GEN_SYS_CFG_BUSHALF	(0x20000000)
+#define NETARM_GEN_SYS_CFG_BUSFULL	(0x40000000)
+
+#define NETARM_GEN_SYS_CFG_BCLK_DISABLE	(0x10000000)
+
+#define NETARM_GEN_SYS_CFG_WDOG_EN	(0x01000000)
+#define NETARM_GEN_SYS_CFG_WDOG_IRQ	(0x00000000)
+#define NETARM_GEN_SYS_CFG_WDOG_FIQ	(0x00400000)
+#define NETARM_GEN_SYS_CFG_WDOG_RST	(0x00800000)
+#define NETARM_GEN_SYS_CFG_WDOG_24	(0x00000000)
+#define NETARM_GEN_SYS_CFG_WDOG_26	(0x00100000)
+#define NETARM_GEN_SYS_CFG_WDOG_28	(0x00200000)
+#define NETARM_GEN_SYS_CFG_WDOG_29	(0x00300000)
+
+#define NETARM_GEN_SYS_CFG_BUSMON_EN	(0x00040000)
+#define NETARM_GEN_SYS_CFG_BUSMON_128	(0x00000000)
+#define NETARM_GEN_SYS_CFG_BUSMON_64	(0x00010000)
+#define NETARM_GEN_SYS_CFG_BUSMON_32	(0x00020000)
+#define NETARM_GEN_SYS_CFG_BUSMON_16	(0x00030000)
+
+#define NETARM_GEN_SYS_CFG_USER_EN	(0x00008000)
+#define NETARM_GEN_SYS_CFG_BUSER_EN	(0x00004000)
+
+#define NETARM_GEN_SYS_CFG_BUSARB_INT	(0x00002000)
+#define NETARM_GEN_SYS_CFG_BUSARB_EXT	(0x00000000)
+
+#define NETARM_GEN_SYS_CFG_DMATST	(0x00001000)
+
+#define NETARM_GEN_SYS_CFG_TEALAST	(0x00000800)
+
+#define NETARM_GEN_SYS_CFG_ALIGN_ABORT	(0x00000400)
+
+#define NETARM_GEN_SYS_CFG_CACHE_EN	(0x00000200)
+
+#define NETARM_GEN_SYS_CFG_WRI_BUF_EN	(0x00000100)
+
+#define NETARM_GEN_SYS_CFG_CACHE_INIT	(0x00000080)
+
+/* PLL Control Register ( 0xFFB0_0008 ) */
+
+#define NETARM_GEN_PLL_CTL_PLLCNT_MASK	(0x0F000000)
+
+#define NETARM_GEN_PLL_CTL_PLLCNT(x)	(((x)<<24) & \
+                                         NETARM_GEN_PLL_CTL_PLLCNT_MASK)
+
+/* Defaults for POLTST and ICP Fields in PLL CTL */
+#define NETARM_GEN_PLL_CTL_OUTDIV(x)    (x)
+#define NETARM_GEN_PLL_CTL_INDIV(x)     ((x)<<6)
+#define NETARM_GEN_PLL_CTL_POLTST_DEF   (0x00000E00)
+#define NETARM_GEN_PLL_CTL_ICP_DEF      (0x0000003C)
+
+
+/* Software Service Register ( 0xFFB0_000C ) */
+
+#define	NETARM_GEN_SW_SVC_RESETA	(0x123)
+#define	NETARM_GEN_SW_SVC_RESETB	(0x321)
+
+/* PORT C Register ( 0xFFB0_0028 ) */
+
+#define	NETARM_GEN_PORT_MODE(x)		(((x)<<24) + (0xFF00))
+#define	NETARM_GEN_PORT_DIR(x)		(((x)<<16) + (0xFF00))
+
+/* Timer Registers ( 0xFFB0_0010 0xFFB0_0018 ) */
+
+#define	NETARM_GEN_TCTL_ENABLE		(0x80000000)
+#define	NETARM_GEN_TCTL_INT_ENABLE	(0x40000000)
+
+#define	NETARM_GEN_TCTL_USE_IRQ		(0x00000000)
+#define	NETARM_GEN_TCTL_USE_FIQ		(0x20000000)
+
+#define	NETARM_GEN_TCTL_USE_PRESCALE	(0x10000000)
+#define	NETARM_GEN_TCTL_INIT_COUNT(x)	((x) & 0x1FF)
+
+#define	NETARM_GEN_TSTAT_INTPEN		(0x40000000)
+#define	NETARM_GEN_TSTAT_CTC_MASK	(0x000001FF)
+
+/* prescale to msecs conversion */
+
+#define	NETARM_GEN_TIMER_MSEC_P(x)	( ( ( 20480 ) * ( 0x1FF - ( (x) &	    \
+                                            NETARM_GEN_TSTAT_CTC_MASK ) +   \
+					    1 ) ) / (NETARM_XTAL_FREQ/1000) )
+
+#define	NETARM_GEN_TIMER_SET_HZ(x)	( ( ((NETARM_XTAL_FREQ/(20480*(x)))-1) & \
+					  NETARM_GEN_TSTAT_CTC_MASK ) | \
+					  NETARM_GEN_TCTL_USE_PRESCALE )
+
+#if 0
+/* ifdef CONFIG_NETARM_PLL_BYPASS else */
+#error test
+#define	NETARM_GEN_TIMER_MSEC_P(x)	( ( ( 4096 ) * ( 0x1FF - ( (x) &    \
+                                            NETARM_GEN_TSTAT_CTC_MASK ) +   \
+					    1 ) ) / (NETARM_XTAL_FREQ/1000) )
+
+#define	NETARM_GEN_TIMER_SET_HZ(x)	( ( ((NETARM_XTAL_FREQ/(4096*(x)))-1) & \
+					  NETARM_GEN_TSTAT_CTC_MASK ) | \
+					  NETARM_GEN_TCTL_USE_PRESCALE )
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-arm720t/netarm_mem_module.h b/include/asm-arm/arch-arm720t/netarm_mem_module.h
new file mode 100644
index 0000000..02ca9fb
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/netarm_mem_module.h
@@ -0,0 +1,158 @@
+/*
+ * include/asm-armnommu/arch-netarm/netarm_mem_module.h
+ *
+ * Copyright (C) 2000, 2001 NETsilicon, Inc.
+ * Copyright (C) 2000, 2001 Red Hat, Inc.
+ *
+ * This software is copyrighted by Red Hat. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall Red Hat
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : Joe deBlaquiere
+ */
+
+#ifndef __NETARM_MEM_MODULE_REGISTERS_H
+#define __NETARM_MEM_MODULE_REGISTERS_H
+
+/* GEN unit register offsets */
+
+#define	NETARM_MEM_MODULE_BASE		(0xFFC00000)
+
+#define	NETARM_MEM_MODULE_CONFIG	(0x00)
+#define	NETARM_MEM_CS0_BASE_ADDR	(0x10)
+#define	NETARM_MEM_CS0_OPTIONS		(0x14)
+#define	NETARM_MEM_CS1_BASE_ADDR	(0x20)
+#define	NETARM_MEM_CS1_OPTIONS		(0x24)
+#define	NETARM_MEM_CS2_BASE_ADDR	(0x30)
+#define	NETARM_MEM_CS2_OPTIONS		(0x34)
+#define	NETARM_MEM_CS3_BASE_ADDR	(0x40)
+#define	NETARM_MEM_CS3_OPTIONS		(0x44)
+#define	NETARM_MEM_CS4_BASE_ADDR	(0x50)
+#define	NETARM_MEM_CS4_OPTIONS		(0x54)
+
+/* select bitfield defintions */
+
+/* Module Configuration Register ( 0xFFC0_0000 ) */
+
+#define NETARM_MEM_CFG_REFR_COUNT_MASK	(0xFF000000)
+#define NETARM_MEM_CFG_REFRESH_EN	(0x00800000)
+
+#define NETARM_MEM_CFG_REFR_CYCLE_8CLKS	(0x00000000)
+#define NETARM_MEM_CFG_REFR_CYCLE_6CLKS	(0x00200000)
+#define NETARM_MEM_CFG_REFR_CYCLE_5CLKS	(0x00400000)
+#define NETARM_MEM_CFG_REFR_CYCLE_4CLKS	(0x00600000)
+
+#define NETARM_MEM_CFG_PORTC_AMUX	(0x00100000)
+
+#define NETARM_MEM_CFG_A27_ADDR		(0x00080000)
+#define NETARM_MEM_CFG_A27_CS0OE	(0x00000000)
+
+#define NETARM_MEM_CFG_A26_ADDR		(0x00040000)
+#define NETARM_MEM_CFG_A26_CS0WE	(0x00000000)
+
+#define NETARM_MEM_CFG_A25_ADDR		(0x00020000)
+#define NETARM_MEM_CFG_A25_BLAST	(0x00000000)
+
+#define NETARM_MEM_CFG_PORTC_AMUX2	(0x00010000)
+
+
+/* range on this period is about 1 to 275 usec (with 18.432MHz clock)   */
+/* the expression will round down, so make sure to reverse it to verify */
+/* it is what you want. period = [( count + 1 ) * 20] / Fcrystal        */
+/* (note: Fxtal = Fcrystal/5, see HWRefGuide sections 8.2.5 and 11.3.2) */
+
+#define	NETARM_MEM_REFR_PERIOD_USEC(p)	(NETARM_MEM_CFG_REFR_COUNT_MASK & \
+					 (((((NETARM_XTAL_FREQ/(1000))*p)/(20000) \
+					    ) - (1) ) << (24)))
+
+#if 0
+/* range on this period is about 1 to 275 usec (with 18.432MHz clock) */
+/* the expression will round down, so make sure to reverse it toverify */
+/* it is what you want. period = [( count + 1 ) * 4] / Fxtal          */
+
+#define	NETARM_MEM_REFR_PERIOD_USEC(p)	(NETARM_MEM_CFG_REFR_COUNT_MASK & \
+					 (((((NETARM_XTAL_FREQ/(1000))*p)/(4000) \
+					    ) - (1) ) << (24)))
+#endif
+
+/* Base Address Registers (0xFFC0_00X0) */
+
+#define NETARM_MEM_BAR_BASE_MASK	(0xFFFFF000)
+
+/* macro to define base */
+
+#define NETARM_MEM_BAR_BASE(x)		((x) & NETARM_MEM_BAR_BASE_MASK)
+
+#define NETARM_MEM_BAR_DRAM_FP		(0x00000000)
+#define NETARM_MEM_BAR_DRAM_EDO		(0x00000100)
+#define NETARM_MEM_BAR_DRAM_SYNC	(0x00000200)
+
+#define NETARM_MEM_BAR_DRAM_MUX_INT	(0x00000000)
+#define NETARM_MEM_BAR_DRAM_MUX_EXT	(0x00000080)
+
+#define NETARM_MEM_BAR_DRAM_MUX_BAL	(0x00000000)
+#define NETARM_MEM_BAR_DRAM_MUX_UNBAL	(0x00000020)
+
+#define NETARM_MEM_BAR_1BCLK_IDLE	(0x00000010)
+
+#define NETARM_MEM_BAR_DRAM_SEL		(0x00000008)
+
+#define NETARM_MEM_BAR_BURST_EN		(0x00000004)
+
+#define NETARM_MEM_BAR_WRT_PROT		(0x00000002)
+
+#define NETARM_MEM_BAR_VALID		(0x00000001)
+
+/* Option Registers (0xFFC0_00X4) */
+
+/* macro to define which bits of the base are significant */
+
+#define NETARM_MEM_OPT_BASE_USE(x)	((x) & NETARM_MEM_BAR_BASE_MASK)
+
+#define NETARM_MEM_OPT_WAIT_MASK	(0x00000F00)
+
+#define	NETARM_MEM_OPT_WAIT_STATES(x)	(((x) << 8 ) & NETARM_MEM_OPT_WAIT_MASK )
+
+#define NETARM_MEM_OPT_BCYC_1		(0x00000000)
+#define NETARM_MEM_OPT_BCYC_2		(0x00000040)
+#define NETARM_MEM_OPT_BCYC_3		(0x00000080)
+#define NETARM_MEM_OPT_BCYC_4		(0x000000C0)
+
+#define NETARM_MEM_OPT_BSIZE_2		(0x00000000)
+#define NETARM_MEM_OPT_BSIZE_4		(0x00000010)
+#define NETARM_MEM_OPT_BSIZE_8		(0x00000020)
+#define NETARM_MEM_OPT_BSIZE_16		(0x00000030)
+
+#define NETARM_MEM_OPT_32BIT		(0x00000000)
+#define NETARM_MEM_OPT_16BIT		(0x00000004)
+#define NETARM_MEM_OPT_8BIT		(0x00000008)
+#define NETARM_MEM_OPT_32BIT_EXT_ACK	(0x0000000C)
+
+#define NETARM_MEM_OPT_BUS_SIZE_MASK	(0x0000000C)
+
+#define NETARM_MEM_OPT_READ_ASYNC	(0x00000000)
+#define NETARM_MEM_OPT_READ_SYNC	(0x00000002)
+
+#define NETARM_MEM_OPT_WRITE_ASYNC	(0x00000000)
+#define NETARM_MEM_OPT_WRITE_SYNC	(0x00000001)
+
+#endif
+
diff --git a/include/asm-arm/arch-arm720t/netarm_registers.h b/include/asm-arm/arch-arm720t/netarm_registers.h
new file mode 100644
index 0000000..231a378
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/netarm_registers.h
@@ -0,0 +1,80 @@
+/*
+ * linux/include/asm-arm/arch-netarm/netarm_registers.h
+ *
+ * Copyright (C) 2000, 2001 NETsilicon, Inc.
+ * Copyright (C) 2000, 2001 WireSpeed Communications Corporation
+ *
+ * This software is copyrighted by WireSpeed. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall WireSpeed
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : Joe deBlaquiere
+ */
+
+#ifndef __NET_ARM_REGISTERS_H
+#define __NET_ARM_REGISTERS_H
+
+#include <config.h>
+
+/* fundamental constants : */
+/* the input crystal/clock frequency ( in Hz ) */
+#define	NETARM_XTAL_FREQ_25MHz		(18432000)
+#define	NETARM_XTAL_FREQ_33MHz		(23698000)
+#define NETARM_XTAL_FREQ_EMLIN1		(20000000)
+
+/* the frequency of SYS_CLK */
+#if defined(CONFIG_NETARM_EMLIN)
+
+/* EMLIN board:  33 MHz (exp.) */
+#define	NETARM_PLL_COUNT_VAL		6
+#define NETARM_XTAL_FREQ		NETARM_XTAL_FREQ_25MHz
+
+#elif defined(CONFIG_NETARM_NET40_REV2)
+
+/* NET+40 Rev2 boards:  33 MHz (with NETARM_XTAL_FREQ_25MHz) */
+#define	NETARM_PLL_COUNT_VAL		6
+#define	NETARM_XTAL_FREQ		NETARM_XTAL_FREQ_25MHz
+
+#elif defined(CONFIG_NETARM_NET40_REV4)
+
+/* NET+40 Rev4 boards with EDO must clock slower: 25 MHz (with
+   NETARM_XTAL_FREQ_25MHz) 4 */
+#define	NETARM_PLL_COUNT_VAL		4
+#define	NETARM_XTAL_FREQ		NETARM_XTAL_FREQ_25MHz
+
+#else  /* CONFIG_NETARM_NET50 */
+
+/* NET+50 boards:  40 MHz (with NETARM_XTAL_FREQ_25MHz) */
+#define NETARM_PLL_COUNT_VAL		8
+#define	NETARM_XTAL_FREQ		NETARM_XTAL_FREQ_25MHz
+
+#endif
+
+/* #include "arm_registers.h" */
+#include <asm/arch/netarm_gen_module.h>
+#include <asm/arch/netarm_mem_module.h>
+#include <asm/arch/netarm_ser_module.h>
+#include <asm/arch/netarm_eni_module.h>
+#include <asm/arch/netarm_dma_module.h>
+#include <asm/arch/netarm_eth_module.h>
+
+#endif
+
diff --git a/include/asm-arm/arch-arm720t/netarm_ser_module.h b/include/asm-arm/arch-arm720t/netarm_ser_module.h
new file mode 100644
index 0000000..fceabd1
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/netarm_ser_module.h
@@ -0,0 +1,347 @@
+/*
+ * linux/include/asm-arm/arch-netarm/netarm_ser_module.h
+ *
+ * Copyright (C) 2000 NETsilicon, Inc.
+ * Copyright (C) 2000 Red Hat, Inc.
+ *
+ * This software is copyrighted by Red Hat. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall Red Hat
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : Joe deBlaquiere
+ *             Clark Williams
+ */
+
+#ifndef __NETARM_SER_MODULE_REGISTERS_H
+#define __NETARM_SER_MODULE_REGISTERS_H
+
+#ifndef	__ASSEMBLER__
+
+/* (--sub)#include "types.h" */
+
+/* serial channel control structure */
+typedef struct {
+  u32	ctrl_a;
+  u32	ctrl_b;
+  u32	status_a;
+  u32	bitrate;
+  u32	fifo;
+  u32	rx_buf_timer;
+  u32	rx_char_timer;
+  u32	rx_match;
+  u32	rx_match_mask;
+  u32	ctrl_c;
+  u32	status_b;
+  u32	status_c;
+  u32	fifo_last;
+  u32	unused[3];
+} netarm_serial_channel_t;
+
+#endif
+
+/* SER unit register offsets */
+
+/* #ifdef CONFIG_ARCH_NETARM */
+#define	NETARM_SER_MODULE_BASE		(0xFFD00000)
+/* #else */
+/* extern serial_channel_t netarm_dummy_registers[]; */
+/* #define NETARM_SER_MODULE_BASE		(netarm_dummy_registers) */
+/* #ifndef NETARM_XTAL_FREQ */
+/* #define NETARM_XTAL_FREQ                18432000 */
+/* #endif */
+/* #endif */
+
+/* calculate the sysclk value from the pll setting */
+#define	NETARM_PLLED_SYSCLK_FREQ	(( NETARM_XTAL_FREQ / 5 ) * \
+					 ( NETARM_PLL_COUNT_VAL + 3 ))
+
+#define get_serial_channel(c) (&(((netarm_serial_channel_t *)NETARM_SER_MODULE_BASE)[c]))
+
+#define	NETARM_SER_CH1_CTRL_A		(0x00)
+#define	NETARM_SER_CH1_CTRL_B		(0x04)
+#define	NETARM_SER_CH1_STATUS_A		(0x08)
+#define	NETARM_SER_CH1_BITRATE		(0x0C)
+#define	NETARM_SER_CH1_FIFO		(0x10)
+#define	NETARM_SER_CH1_RX_BUF_TMR	(0x14)
+#define	NETARM_SER_CH1_RX_CHAR_TMR	(0x18)
+#define	NETARM_SER_CH1_RX_MATCH		(0x1c)
+#define	NETARM_SER_CH1_RX_MATCH_MASK	(0x20)
+#define	NETARM_SER_CH1_CTRL_C		(0x24)
+#define	NETARM_SER_CH1_STATUS_B		(0x28)
+#define	NETARM_SER_CH1_STATUS_C		(0x2c)
+#define	NETARM_SER_CH1_FIFO_LAST	(0x30)
+
+#define	NETARM_SER_CH2_CTRL_A		(0x40)
+#define	NETARM_SER_CH2_CTRL_B		(0x44)
+#define	NETARM_SER_CH2_STATUS_A		(0x48)
+#define	NETARM_SER_CH2_BITRATE		(0x4C)
+#define	NETARM_SER_CH2_FIFO		(0x50)
+#define	NETARM_SER_CH2_RX_BUF_TMR	(0x54)
+#define	NETARM_SER_CH2_RX_CHAR_TMR	(0x58)
+#define	NETARM_SER_CH2_RX_MATCH		(0x5c)
+#define	NETARM_SER_CH2_RX_MATCH_MASK	(0x60)
+#define	NETARM_SER_CH2_CTRL_C		(0x64)
+#define	NETARM_SER_CH2_STATUS_B		(0x68)
+#define	NETARM_SER_CH2_STATUS_C		(0x6c)
+#define	NETARM_SER_CH2_FIFO_LAST	(0x70)
+
+/* select bitfield defintions */
+
+/* Control Register A */
+
+#define	NETARM_SER_CTLA_ENABLE		(0x80000000)
+#define	NETARM_SER_CTLA_BRK		(0x40000000)
+
+#define	NETARM_SER_CTLA_STICKP		(0x20000000)
+
+#define	NETARM_SER_CTLA_P_EVEN		(0x18000000)
+#define	NETARM_SER_CTLA_P_ODD		(0x08000000)
+#define	NETARM_SER_CTLA_P_NONE		(0x00000000)
+
+/* if you read the errata, you will find that the STOP bits don't work right */
+#define	NETARM_SER_CTLA_2STOP		(0x00000000)
+#define	NETARM_SER_CTLA_3STOP		(0x04000000)
+
+#define	NETARM_SER_CTLA_5BITS		(0x00000000)
+#define	NETARM_SER_CTLA_6BITS		(0x01000000)
+#define	NETARM_SER_CTLA_7BITS		(0x02000000)
+#define	NETARM_SER_CTLA_8BITS		(0x03000000)
+
+#define	NETARM_SER_CTLA_CTSTX		(0x00800000)
+#define	NETARM_SER_CTLA_RTSRX		(0x00400000)
+
+#define	NETARM_SER_CTLA_LOOP_REM	(0x00200000)
+#define	NETARM_SER_CTLA_LOOP_LOC	(0x00100000)
+
+#define	NETARM_SER_CTLA_GPIO2		(0x00080000)
+#define	NETARM_SER_CTLA_GPIO1		(0x00040000)
+
+#define	NETARM_SER_CTLA_DTR_EN		(0x00020000)
+#define	NETARM_SER_CTLA_RTS_EN		(0x00010000)
+
+#define	NETARM_SER_CTLA_IE_RX_BRK	(0x00008000)
+#define	NETARM_SER_CTLA_IE_RX_FRMERR	(0x00004000)
+#define	NETARM_SER_CTLA_IE_RX_PARERR	(0x00002000)
+#define	NETARM_SER_CTLA_IE_RX_OVERRUN	(0x00001000)
+#define	NETARM_SER_CTLA_IE_RX_RDY	(0x00000800)
+#define	NETARM_SER_CTLA_IE_RX_HALF	(0x00000400)
+#define	NETARM_SER_CTLA_IE_RX_FULL	(0x00000200)
+#define	NETARM_SER_CTLA_IE_RX_DMAEN	(0x00000100)
+#define	NETARM_SER_CTLA_IE_RX_DCD	(0x00000080)
+#define	NETARM_SER_CTLA_IE_RX_RI	(0x00000040)
+#define	NETARM_SER_CTLA_IE_RX_DSR	(0x00000020)
+
+#define NETARM_SER_CTLA_IE_RX_ALL	(NETARM_SER_CTLA_IE_RX_BRK \
+					|NETARM_SER_CTLA_IE_RX_FRMERR \
+					|NETARM_SER_CTLA_IE_RX_PARERR \
+					|NETARM_SER_CTLA_IE_RX_OVERRUN \
+					|NETARM_SER_CTLA_IE_RX_RDY \
+					|NETARM_SER_CTLA_IE_RX_HALF \
+					|NETARM_SER_CTLA_IE_RX_FULL \
+					|NETARM_SER_CTLA_IE_RX_DMAEN \
+					|NETARM_SER_CTLA_IE_RX_DCD \
+					|NETARM_SER_CTLA_IE_RX_RI \
+					|NETARM_SER_CTLA_IE_RX_DSR)
+
+#define	NETARM_SER_CTLA_IE_TX_CTS	(0x00000010)
+#define	NETARM_SER_CTLA_IE_TX_EMPTY	(0x00000008)
+#define	NETARM_SER_CTLA_IE_TX_HALF	(0x00000004)
+#define	NETARM_SER_CTLA_IE_TX_FULL	(0x00000002)
+#define	NETARM_SER_CTLA_IE_TX_DMAEN	(0x00000001)
+
+#define NETARM_SER_CTLA_IE_TX_ALL	(NETARM_SER_CTLA_IE_TX_CTS \
+					|NETARM_SER_CTLA_IE_TX_EMPTY \
+					|NETARM_SER_CTLA_IE_TX_HALF \
+					|NETARM_SER_CTLA_IE_TX_FULL \
+					|NETARM_SER_CTLA_IE_TX_DMAEN)
+
+/* Control Register B */
+
+#define	NETARM_SER_CTLB_MATCH1_EN	(0x80000000)
+#define	NETARM_SER_CTLB_MATCH2_EN	(0x40000000)
+#define	NETARM_SER_CTLB_MATCH3_EN	(0x20000000)
+#define	NETARM_SER_CTLB_MATCH4_EN	(0x10000000)
+
+#define	NETARM_SER_CTLB_RBGT_EN		(0x08000000)
+#define	NETARM_SER_CTLB_RCGT_EN		(0x04000000)
+
+#define	NETARM_SER_CTLB_UART_MODE	(0x00000000)
+#define	NETARM_SER_CTLB_HDLC_MODE	(0x00100000)
+#define	NETARM_SER_CTLB_SPI_MAS_MODE	(0x00200000)
+#define	NETARM_SER_CTLB_SPI_SLV_MODE	(0x00300000)
+
+#define	NETARM_SER_CTLB_REV_BIT_ORDER	(0x00080000)
+
+#define	NETARM_SER_CTLB_MAM1		(0x00040000)
+#define	NETARM_SER_CTLB_MAM2		(0x00020000)
+
+/* Status Register A */
+
+#define	NETARM_SER_STATA_MATCH1		(0x80000000)
+#define	NETARM_SER_STATA_MATCH2		(0x40000000)
+#define	NETARM_SER_STATA_MATCH3		(0x20000000)
+#define	NETARM_SER_STATA_MATCH4		(0x10000000)
+
+#define	NETARM_SER_STATA_BGAP		(0x80000000)
+#define	NETARM_SER_STATA_CGAP		(0x40000000)
+
+#define	NETARM_SER_STATA_RX_1B		(0x00100000)
+#define	NETARM_SER_STATA_RX_2B		(0x00200000)
+#define	NETARM_SER_STATA_RX_3B		(0x00300000)
+#define	NETARM_SER_STATA_RX_4B		(0x00000000)
+
+/* downshifted values */
+
+#define	NETARM_SER_STATA_RXFDB_1BYTES	(0x001)
+#define	NETARM_SER_STATA_RXFDB_2BYTES	(0x002)
+#define	NETARM_SER_STATA_RXFDB_3BYTES	(0x003)
+#define	NETARM_SER_STATA_RXFDB_4BYTES	(0x000)
+
+#define	NETARM_SER_STATA_RXFDB_MASK	(0x00300000)
+#define	NETARM_SER_STATA_RXFDB(x)	(((x) & NETARM_SER_STATA_RXFDB_MASK) \
+					 >> 20)
+
+#define	NETARM_SER_STATA_DCD		(0x00080000)
+#define	NETARM_SER_STATA_RI		(0x00040000)
+#define	NETARM_SER_STATA_DSR		(0x00020000)
+#define	NETARM_SER_STATA_CTS		(0x00010000)
+
+#define	NETARM_SER_STATA_RX_BRK		(0x00008000)
+#define	NETARM_SER_STATA_RX_FRMERR	(0x00004000)
+#define	NETARM_SER_STATA_RX_PARERR	(0x00002000)
+#define	NETARM_SER_STATA_RX_OVERRUN	(0x00001000)
+#define	NETARM_SER_STATA_RX_RDY		(0x00000800)
+#define	NETARM_SER_STATA_RX_HALF	(0x00000400)
+#define	NETARM_SER_STATA_RX_CLOSED	(0x00000200)
+#define	NETARM_SER_STATA_RX_FULL	(0x00000100)
+#define	NETARM_SER_STATA_RX_DCD		(0x00000080)
+#define	NETARM_SER_STATA_RX_RI		(0x00000040)
+#define	NETARM_SER_STATA_RX_DSR		(0x00000020)
+
+#define	NETARM_SER_STATA_TX_CTS		(0x00000010)
+#define	NETARM_SER_STATA_TX_RDY		(0x00000008)
+#define	NETARM_SER_STATA_TX_HALF	(0x00000004)
+#define	NETARM_SER_STATA_TX_FULL	(0x00000002)
+#define	NETARM_SER_STATA_TX_DMAEN	(0x00000001)
+
+/* you have to clear all receive signals to get the fifo to move forward */
+#define NETARM_SER_STATA_CLR_ALL	(NETARM_SER_STATA_RX_BRK | \
+					 NETARM_SER_STATA_RX_FRMERR | \
+					 NETARM_SER_STATA_RX_PARERR | \
+					 NETARM_SER_STATA_RX_OVERRUN | \
+					 NETARM_SER_STATA_RX_HALF | \
+					 NETARM_SER_STATA_RX_CLOSED | \
+					 NETARM_SER_STATA_RX_FULL | \
+					 NETARM_SER_STATA_RX_DCD | \
+					 NETARM_SER_STATA_RX_RI | \
+					 NETARM_SER_STATA_RX_DSR | \
+					 NETARM_SER_STATA_TX_CTS )
+
+/* Bit Rate Registers */
+
+#define	NETARM_SER_BR_EN		(0x80000000)
+#define	NETARM_SER_BR_TMODE		(0x40000000)
+
+#define	NETARM_SER_BR_RX_CLK_INT	(0x00000000)
+#define	NETARM_SER_BR_RX_CLK_EXT	(0x20000000)
+#define	NETARM_SER_BR_TX_CLK_INT	(0x00000000)
+#define	NETARM_SER_BR_TX_CLK_EXT	(0x10000000)
+
+#define	NETARM_SER_BR_RX_CLK_DRV	(0x08000000)
+#define	NETARM_SER_BR_TX_CLK_DRV	(0x04000000)
+
+#define	NETARM_SER_BR_CLK_EXT_5		(0x00000000)
+#define	NETARM_SER_BR_CLK_SYSTEM	(0x01000000)
+#define	NETARM_SER_BR_CLK_OUT1A		(0x02000000)
+#define	NETARM_SER_BR_CLK_OUT2A		(0x03000000)
+
+#define	NETARM_SER_BR_TX_CLK_INV	(0x00800000)
+#define	NETARM_SER_BR_RX_CLK_INV	(0x00400000)
+
+/* complete settings assuming system clock input is 18MHz */
+
+#define	NETARM_SER_BR_MASK		(0x000007FF)
+
+/* bit rate determined from equation Fbr = Fxtal / [ 10 * ( N + 1 ) ] */
+/* from section 7.5.4 of HW Ref Guide */
+
+/* #ifdef CONFIG_NETARM_PLL_BYPASS */
+#define	NETARM_SER_BR_X16(x)	( NETARM_SER_BR_EN | 			\
+				  NETARM_SER_BR_RX_CLK_INT | 		\
+				  NETARM_SER_BR_TX_CLK_INT | 		\
+				  NETARM_SER_BR_CLK_EXT_5 | 		\
+				  ( ( ( ( NETARM_XTAL_FREQ / 		\
+				          ( x * 10 ) ) - 1 ) /	16 ) & 	\
+				    NETARM_SER_BR_MASK ) )
+/*
+#else
+#define	NETARM_SER_BR_X16(x)	( NETARM_SER_BR_EN | 			\
+				  NETARM_SER_BR_RX_CLK_INT | 		\
+				  NETARM_SER_BR_TX_CLK_INT | 		\
+				  NETARM_SER_BR_CLK_SYSTEM | 		\
+				  ( ( ( ( NETARM_PLLED_SYSCLK_FREQ / 		\
+				          ( x * 2 ) ) - 1 ) /	16 ) & 	\
+				    NETARM_SER_BR_MASK ) )
+#endif
+*/
+
+/* Receive Buffer Gap Timer */
+
+#define	NETARM_SER_RX_GAP_TIMER_EN	(0x80000000)
+#define	NETARM_SER_RX_GAP_MASK		(0x00003FFF)
+
+/* rx gap is a function of bit rate x */
+
+/* #ifdef CONFIG_NETARM_PLL_BYPASS */
+#define	NETARM_SER_RXGAP(x)	( NETARM_SER_RX_GAP_TIMER_EN |		\
+				  ( ( ( ( 10 * NETARM_XTAL_FREQ ) /	\
+				        ( x * 5 * 512 ) ) - 1 ) & 	\
+			              NETARM_SER_RX_GAP_MASK ) )
+/*
+#else
+#define	NETARM_SER_RXGAP(x)	( NETARM_SER_RX_GAP_TIMER_EN |			\
+				  ( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) /	\
+				        ( x * 512 ) ) - 1 ) & 			\
+			              NETARM_SER_RX_GAP_MASK ) )
+#endif
+*/
+
+#if 0
+#define	NETARM_SER_RXGAP(x)	( NETARM_SER_RX_GAP_TIMER_EN |		\
+				  ( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) /	\
+				        ( x * 5 * 512 ) ) - 1 ) & 	\
+			              NETARM_SER_RX_GAP_MASK ) )
+#define	NETARM_SER_RXGAP(x)	( NETARM_SER_RX_GAP_TIMER_EN |		\
+				  ( ( ( ( 10 * NETARM_XTAL_FREQ ) /	\
+				        ( x * 512 ) ) - 1 ) & 	\
+			              NETARM_SER_RX_GAP_MASK ) )
+#endif
+
+#define MIN_BAUD_RATE        600
+#define MAX_BAUD_RATE     115200
+
+/* the default BAUD rate for the BOOTLOADER, there is a separate */
+/* setting in the serial driver <arch/armnommu/drivers/char/serial-netarm.h> */
+#define DEFAULT_BAUD_RATE 9600
+#define NETARM_SER_FIFO_SIZE 32
+#define MIN_GAP 0
+
+#endif
diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h
index ebea56b..af5654c 100644
--- a/include/cmd_confdefs.h
+++ b/include/cmd_confdefs.h
@@ -85,6 +85,7 @@
 #define CFG_CMD_MMC	0x0008000000000000U	/* MMC support			*/
 #define CFG_CMD_FAT	0x0010000000000000U	/* FAT support			*/
 #define CFG_CMD_IMLS	0x0020000000000000U	/* List all found images        */
+#define CFG_CMD_ITEST	0x0040000000000000U	/* Integer (and string) test	*/
 
 #define CFG_CMD_ALL	0xFFFFFFFFFFFFFFFFU	/* ALL commands			*/
 
diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h
new file mode 100644
index 0000000..fd1b47c
--- /dev/null
+++ b/include/configs/modnet50.h
@@ -0,0 +1,179 @@
+/*
+ * (C) Copyright 2004
+ * IMMS, gGmbH <www.imms.de>
+ * Thomas Elste <info@elste.org>
+ *
+ * Configuation settings for ModNET50 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start u-boot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL            /* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM7		1	/* This is a ARM7 CPU	*/
+#define CONFIG_ARM_THUMB	1	/* this is an ARM720TDMI */
+#define CONFIG_NETARM                   /* it's a Netsiclicon NET+ARM */
+#undef  CONFIG_NETARM_NET40_REV2        /* it's a Net+40 Rev. 2 */
+#undef  CONFIG_NETARM_NET40_REV4	/* it's a Net+40 Rev. 4 */
+#define CONFIG_NETARM_NET50             /* it's a Net+50 */
+
+#define CONFIG_MODNET50		1	/* on an ModNET50 Board      */
+
+#undef CONFIG_USE_IRQ			/* don't need them anymore */
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_NETARMETH 1
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1		1	/* we use Serial line 1 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE		38400
+
+#define CONFIG_BOOTP_MASK       (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS		((CONFIG_CMD_DFL | CFG_CMD_JFFS2))
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_NETMASK          255.255.255.0
+#define CONFIG_IPADDR		192.168.30.2
+#define CONFIG_SERVERIP         192.168.30.122
+#define CFG_ETH_PHY_ADDR        0x100
+#define CONFIG_CMDLINE_TAG      /* submit bootargs to kernel */
+
+/*#define CONFIG_BOOTDELAY	10*/
+/* args and cmd for uClinux-image @ 0x10020000, ramdisk-image @ 0x100a0000 */
+#define CONFIG_BOOTCOMMAND	"bootm 0x10020000 0x100a0000"
+#define CONFIG_BOOTARGS    	"console=ttyS0,38400 initrd=0x100a0040,530K root=/dev/ram keepinitrd"
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory	*/
+#define	CFG_PROMPT		"modnet50 # "	/* Monitor Command Prompt */
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size */
+#define	CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x00800000	/* 4 ... 8 MB in DRAM	*/
+
+#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define	CFG_LOAD_ADDR		0x00500000	/* default load address	*/
+
+#define	CFG_HZ			900		/* decrementer freq: 2 kHz */
+
+						/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+*/
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 banks of DRAM */
+#define PHYS_SDRAM_1		0x00000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x01000000 /* 16 MB */
+#define PHYS_SDRAM_2		0x01000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_2_SIZE	0x01000000 /* 16 MB */
+
+#define PHYS_FLASH_1		0x10000000 /* Flash Bank #1 */
+#define PHYS_FLASH_1_SIZE	0x00200000 /* 2 MB (one chip only, 16bit access) */
+
+#define PHYS_FLASH_2            0x10200001
+#define PHYS_FLASH_2_SIZE       0x00200000
+
+#define CONFIG_NETARM_EEPROM
+/* #ifdef CONFIG_NETARM_EEPROM */
+#define PHYS_NVRAM_1		0x20000000 /* EEPROM Bank #1 */
+#define PHYS_NVRAM_SIZE		0x00002000 /* 8 KB */
+/* #endif */
+
+#define PHYS_EXT_1		0x30000000 /* Extensions Bank #1 */
+#define PHYS_EXT_SIZE		0x01000000 /* 32 MB memory mapped I/O */
+
+#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CFG_FLASH_SIZE		PHYS_FLASH_1_SIZE
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	35	/* max number of sectors on one chip */
+#define CFG_MAIN_SECT_SIZE      0x00010000  /* main size of sectors on one chip */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+
+/* environment settings */
+#define	CFG_ENV_IS_IN_FLASH
+#undef CFG_ENV_IS_NOWHERE
+
+#define CFG_ENV_ADDR		0x1001C000 /* environment start address */
+#define CFG_ENV_SECT_SIZE       0x10000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE		0x4000	/* max size for environment */
+
+/* Flash banks JFFS2 should use */
+#define CFG_JFFS2_FIRST_BANK    0
+#define CFG_JFFS2_FIRST_SECTOR	8
+#define CFG_JFFS2_NUM_BANKS     2
+
+#endif	/* __CONFIG_H */
diff --git a/include/fat.h b/include/fat.h
index 8fffb42..13910f9 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -67,6 +67,10 @@
 #define DELETED_FLAG	((char)0xe5) /* Marks deleted files when in name[0] */
 #define aRING		0x05	     /* Used to represent 'å' in name[0] */
 
+/* Indicates that the entry is the last long entry in a set of long
+ * dir entries
+ */
+#define LAST_LONG_ENTRY_MASK	0x40
 
 /* Flags telling whether we should read a file or list a directory */
 #define LS_NO	0