Merge git://git.denx.de/u-boot-i2c

4 files changed, 42 insertions, 34 deletions

diff --git a/cmd/i2c.c b/cmd/i2c.c
index 3dd7c6b..bfddf8b 100644
--- a/cmd/i2c.c
+++ b/cmd/i2c.c
@@ -1156,7 +1156,10 @@ static int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 	uint	chip;
 	u_char	data[128];
 	u_char	cksum;
-	int	j;
+	int	j, ret;
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+#endif
 
 	static const char *decode_CAS_DDR2[] = {
 		" TBD", " 6", " 5", " 4", " 3", " 2", " TBD", " TBD"
@@ -1210,7 +1213,14 @@ static int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 	 */
 	chip = simple_strtoul (argv[1], NULL, 16);
 
-	if (i2c_read (chip, 0, 1, data, sizeof (data)) != 0) {
+#ifdef CONFIG_DM_I2C
+	ret = i2c_get_cur_bus_chip(chip, &dev);
+	if (!ret)
+		ret = dm_i2c_read(dev, 0, data, sizeof(data));
+#else
+	ret = i2c_read(chip, 0, 1, data, sizeof(data));
+#endif
+	if (ret) {
 		puts ("No SDRAM Serial Presence Detect found.\n");
 		return 1;
 	}
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index cc370b9..0630712 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -141,7 +141,12 @@ config SYS_I2C_MESON
 	bool "Amlogic Meson I2C driver"
 	depends on DM_I2C && ARCH_MESON
 	help
-	  Add support for the Amlogic Meson I2C driver.
+	  Add support for the I2C controller available in Amlogic Meson
+	  SoCs. The controller supports programmable bus speed including
+	  standard (100kbits/s) and fast (400kbit/s) speed and allows the
+	  software to define a flexible format of the bit streams. It has an
+	  internal buffer holding up to 8 bytes for transfers and supports
+	  both 7-bit and 10-bit addresses.
 
 config SYS_I2C_MXC
 	bool "NXP i.MX I2C driver"
diff --git a/drivers/i2c/at91_i2c.c b/drivers/i2c/at91_i2c.c
index d394044..7917ca1 100644
--- a/drivers/i2c/at91_i2c.c
+++ b/drivers/i2c/at91_i2c.c
@@ -72,6 +72,8 @@ static int at91_i2c_xfer_msg(struct at91_i2c_bus *bus, struct i2c_msg *msg)
 
 	} else {
 		writel(msg->buf[0], &reg->thr);
+		ret = at91_wait_for_xfer(bus, TWI_SR_TXRDY);
+
 		for (i = 1; !ret && (i < msg->len); i++) {
 			writel(msg->buf[i], &reg->thr);
 			ret = at91_wait_for_xfer(bus, TWI_SR_TXRDY);
@@ -199,27 +201,6 @@ static int at91_i2c_enable_clk(struct udevice *dev)
 	return 0;
 }
 
-static int at91_i2c_probe_chip(struct udevice *dev, uint chip, uint chip_flags)
-{
-	struct at91_i2c_bus *bus = dev_get_priv(dev);
-	struct at91_i2c_regs *reg = bus->regs;
-	int ret;
-
-	ret = at91_i2c_enable_clk(dev);
-	if (ret)
-		return ret;
-
-	writel(TWI_CR_SWRST, &reg->cr);
-
-	at91_calc_i2c_clock(dev, bus->clock_frequency);
-
-	writel(bus->cwgr_val, &reg->cwgr);
-	writel(TWI_CR_MSEN, &reg->cr);
-	writel(TWI_CR_SVDIS, &reg->cr);
-
-	return 0;
-}
-
 static int at91_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
 {
 	struct at91_i2c_bus *bus = dev_get_priv(dev);
@@ -254,7 +235,6 @@ static int at91_i2c_ofdata_to_platdata(struct udevice *dev)
 
 static const struct dm_i2c_ops at91_i2c_ops = {
 	.xfer		= at91_i2c_xfer,
-	.probe_chip	= at91_i2c_probe_chip,
 	.set_bus_speed	= at91_i2c_set_bus_speed,
 	.get_bus_speed	= at91_i2c_get_bus_speed,
 };
diff --git a/drivers/i2c/meson_i2c.c b/drivers/i2c/meson_i2c.c
index 2434d9e..4f37d2f 100644
--- a/drivers/i2c/meson_i2c.c
+++ b/drivers/i2c/meson_i2c.c
@@ -9,7 +9,7 @@
 #include <dm.h>
 #include <i2c.h>
 
-#define I2C_TIMEOUT_MS		500
+#define I2C_TIMEOUT_MS		100
 
 /* Control register fields */
 #define REG_CTRL_START		BIT(0)
@@ -44,12 +44,12 @@ struct i2c_regs {
 
 struct meson_i2c {
 	struct i2c_regs *regs;
-	struct i2c_msg *msg;
-	bool last;
-	uint count;
-	uint pos;
-	u32 tokens[2];
-	uint num_tokens;
+	struct i2c_msg *msg;	/* Current I2C message */
+	bool last;		/* Whether the message is the last */
+	uint count;		/* Number of bytes in the current transfer */
+	uint pos;		/* Position of current transfer in message */
+	u32 tokens[2];		/* Sequence of tokens to be written */
+	uint num_tokens;	/* Number of tokens to be written */
 };
 
 static void meson_i2c_reset_tokens(struct meson_i2c *i2c)
@@ -69,6 +69,10 @@ static void meson_i2c_add_token(struct meson_i2c *i2c, int token)
 	i2c->num_tokens++;
 }
 
+/*
+ * Retrieve data for the current transfer (which can be at most 8
+ * bytes) from the device internal buffer.
+ */
 static void meson_i2c_get_data(struct meson_i2c *i2c, u8 *buf, int len)
 {
 	u32 rdata0, rdata1;
@@ -86,6 +90,10 @@ static void meson_i2c_get_data(struct meson_i2c *i2c, u8 *buf, int len)
 		*buf++ = (rdata1 >> (i - 4) * 8) & 0xff;
 }
 
+/*
+ * Write data for the current transfer (which can be at most 8 bytes)
+ * to the device internal buffer.
+ */
 static void meson_i2c_put_data(struct meson_i2c *i2c, u8 *buf, int len)
 {
 	u32 wdata0 = 0, wdata1 = 0;
@@ -103,6 +111,11 @@ static void meson_i2c_put_data(struct meson_i2c *i2c, u8 *buf, int len)
 	debug("meson i2c: write data %08x %08x len %d\n", wdata0, wdata1, len);
 }
 
+/*
+ * Prepare the next transfer: pick the next 8 bytes in the remaining
+ * part of message and write tokens and data (if needed) to the
+ * device.
+ */
 static void meson_i2c_prepare_xfer(struct meson_i2c *i2c)
 {
 	bool write = !(i2c->msg->flags & I2C_M_RD);
@@ -178,7 +191,7 @@ static int meson_i2c_xfer_msg(struct meson_i2c *i2c, struct i2c_msg *msg,
 
 		if (readl(&i2c->regs->ctrl) & REG_CTRL_ERROR) {
 			debug("meson i2c: error\n");
-			return -ENXIO;
+			return -EREMOTEIO;
 		}
 
 		if ((msg->flags & I2C_M_RD) && i2c->count) {
@@ -200,7 +213,7 @@ static int meson_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
 	for (i = 0; i < nmsgs; i++) {
 		ret = meson_i2c_xfer_msg(i2c, msg + i, i == nmsgs - 1);
 		if (ret)
-			return -EREMOTEIO;
+			return ret;
 	}
 
 	return 0;