imx: sync with kernel device tree for Phycore SoM

Sync the Linux Kernel 5.4-rc6 device tree for Phytec Phycore
SoM and Segin board based on imx6UL and imx6ULL.

Changes includes Phytec naming convention for the devicetree files.

Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>

14 files changed, 732 insertions, 239 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 97504e3..88b2bf4 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -663,14 +663,14 @@ dtb-$(CONFIG_MX6UL) += \
 	imx6ul-9x9-evk.dtb \
 	imx6ul-9x9-evk.dtb \
 	imx6ul-liteboard.dtb \
-	imx6ul-phycore-segin.dtb \
+	imx6ul-phytec-segin-ff-rdk-nand.dtb \
 	imx6ul-pico-hobbit.dtb \
 	imx6ul-pico-pi.dtb
 
 dtb-$(CONFIG_MX6ULL) += \
 	imx6ull-14x14-evk.dtb \
 	imx6ull-colibri.dtb \
-	imx6ull-phycore-segin.dtb \
+	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
 	imx6ull-dart-6ul.dtb \
 	imx6ulz-14x14-evk.dtb
 
diff --git a/arch/arm/dts/imx6ul-phycore-segin.dts b/arch/arm/dts/imx6ul-phycore-segin.dts
deleted file mode 100644
index 7d68bf8..0000000
--- a/arch/arm/dts/imx6ul-phycore-segin.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Collabora Ltd.
- *
- * Based on dts[i] from Phytec barebox port:
- * Copyright (C) 2016 PHYTEC Messtechnik GmbH
- * Author: Christian Hemp <c.hemp@phytec.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-
-#include "imx6ul.dtsi"
-#include "pcl063-common.dtsi"
-
-/ {
-	model = "Phytec phyBOARD-i.MX6UL-Segin SBC";
-	compatible = "phytec,phyboard-imx6ul-segin", "phytec,imx6ul-pcl063",
-		     "fsl,imx6ul";
-};
-
-&gpmi {
-	status = "okay";
-};
-
-&i2c1 {
-	i2c_rtc: rtc@68 {
-		compatible = "microcrystal,rv4162";
-		reg = <0x68>;
-		status = "okay";
-	};
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1_id>;
-	dr_mode = "otg";
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
-			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
-			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_usb_otg1_id: usbotg1idgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID    0x17059
-		>;
-	};
-
-};
diff --git a/arch/arm/dts/pcl063-common.dtsi b/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
index b88dde2..c2a7c78 100644
--- a/arch/arm/dts/pcl063-common.dtsi
+++ b/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
@@ -1,22 +1,35 @@
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2018 Collabora Ltd.
- *
- * Based on dts[i] from Phytec barebox port:
  * Copyright (C) 2016 PHYTEC Messtechnik GmbH
  * Author: Christian Hemp <c.hemp@phytec.de>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
 / {
-	model = "Phytec phyCORE-i.MX6 Ultra Lite SOM";
+	model = "PHYTEC phyCORE-i.MX6 UltraLite";
 	compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul";
 
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	memory {
+		device_type = "memory";
 		reg = <0x80000000 0x20000000>;
 	};
 
-	chosen {
-		stdout-path = &uart1;
+	gpio_leds_som: leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds_som>;
+		compatible = "gpio-leds";
+
+		phycore-green {
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
 	};
 };
 
@@ -24,16 +37,21 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
+	phy-handle = <&ethphy1>;
+	status = "disabled";
 
 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy0: ethernet-phy@1 {
+		ethphy1: ethernet-phy@1 {
 			reg = <1>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			status = "disabled";
 		};
 	};
 };
@@ -42,89 +60,61 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
 	nand-on-flash-bbt;
-	fsl,no-blockmark-swap;
 	status = "disabled";
-
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0 0x400000>;
-	};
-
-	partition@400000 {
-		label = "uboot-env";
-		reg = <0x400000 0x100000>;
-	};
-
-	partition@500000 {
-		label = "root";
-		reg = <0x500000 0x0>;
-	};
 };
 
 &i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
+	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	clock-frequency = <100000>;
 	status = "okay";
 
 	eeprom@52 {
-		compatible = "cat,24c32";
+		compatible = "catalyst,24c32", "atmel,24c32";
 		reg = <0x52>;
 	};
 };
 
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
+&snvs_poweroff {
 	status = "okay";
 };
 
-&usdhc1 {
+&uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	bus-width = <0x4>;
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	no-1-8-v;
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &usdhc2 {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <8>;
 	no-1-8-v;
 	non-removable;
-	keep-power-in-suspend;
 	status = "disabled";
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x10010
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x10010
 			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
 			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
 			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
 			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x17059
 		>;
 	};
 
+	pinctrl_gpioleds_som: gpioledssomgrp {
+		fsl,pins = <MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0>;
+	};
+
 	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
@@ -147,35 +137,15 @@
 
 	pinctrl_i2c1: i2cgrp {
 		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL       0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA       0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1grp_gpio {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
-			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
 		>;
 	};
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX   0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX   0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
-
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
 		>;
 	};
 
@@ -191,7 +161,7 @@
 			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
 			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
 			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
-			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x170f9
 		>;
 	};
+
 };
diff --git a/arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
new file mode 100644
index 0000000..699dfcb
--- /dev/null
+++ b/arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-phytec-phycore-som.dtsi"
+#include "imx6ul-phytec-segin.dtsi"
+#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
+	compatible = "phytec,imx6ul-pbacd10-nand", "phytec,imx6ul-pbacd10",
+		     "phytec,imx6ul-pcl063", "fsl,imx6ul";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&tlv320 {
+	status = "okay";
+};
+
+&ecspi3 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&reg_can1_en {
+	status = "okay";
+};
+
+&reg_sound_1v8 {
+	status = "okay";
+};
+
+&reg_sound_3v3 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/imx6ul-phytec-segin-peb-eval-01.dtsi b/arch/arm/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
new file mode 100644
index 0000000..2f3fd32
--- /dev/null
+++ b/arch/arm/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio_keys: gpio-keys {
+		compatible = "gpio-key";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+		status = "disabled";
+
+		user-led1 {
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+
+		user-led2 {
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x79
+		>;
+	};
+
+	pinctrl_user_leds: user_ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x79
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x79
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6ul-phytec-segin.dtsi b/arch/arm/dts/imx6ul-phytec-segin.dtsi
new file mode 100644
index 0000000..8d5f8dc
--- /dev/null
+++ b/arch/arm/dts/imx6ul-phytec-segin.dtsi
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite";
+	compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
+
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	reg_sound_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "i2s-audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		status = "disabled";
+	};
+
+	reg_sound_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "i2s-audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "disabled";
+	};
+
+	reg_can1_en: regulator-can1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&princtrl_flexcan1_en>;
+		regulator-name = "Can";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_adc1_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&tlv320>;
+			clocks = <&clks IMX6UL_CLK_SAI2>;
+		};
+	};
+
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	vref-supply = <&reg_adc1_vref_3v3>;
+	/*
+	 * driver can not separate a specific channel so we request 4 channels
+	 * here - we need only the fourth channel
+	 */
+	num-channels = <4>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_en>;
+	status = "disabled";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+	status = "disabled";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	status = "disabled";
+};
+
+&i2c1 {
+	tlv320: codec@18 {
+		compatible = "ti,tlv320aic3007";
+		#sound-dai-cells = <0>;
+		reg = <0x18>;
+		AVDD-supply = <&reg_sound_3v3>;
+		IOVDD-supply = <&reg_sound_3v3>;
+		DRVDD-supply = <&reg_sound_3v3>;
+		DVDD-supply = <&reg_sound_1v8>;
+		status = "disabled";
+	};
+
+	stmpe: touchscreen@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe>;
+		status = "disabled";
+
+		touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+			touchscreen-inverted-x = <1>;
+			touchscreen-inverted-y = <1>;
+		};
+	};
+
+	i2c_rtc: rtc@68 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		reg = <2>;
+		micrel,led-mode = <1>;
+		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+		clock-names = "rmii-ref";
+		status = "disabled";
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			<&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <19200000>;
+	fsl,sai-mclk-direction-output;
+	status = "disabled";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	status = "disabled";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1 {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+		>;
+	};
+
+	princtrl_flexcan1_en: flexcan1engrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__PWM3_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6ull-phycore-segin.dts b/arch/arm/dts/imx6ull-phycore-segin.dts
deleted file mode 100644
index 6df3ad2..0000000
--- a/arch/arm/dts/imx6ull-phycore-segin.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
- */
-
-/dts-v1/;
-
-#include "imx6ull.dtsi"
-#include "pcl063-common.dtsi"
-
-/ {
-	model = "Phytec phyBOARD-i.MX6ULL-Segin SBC";
-	compatible = "phytec,phyboard-imx6ull-segin", "phytec,imx6ull-pcl063",
-		     "fsl,imx6ull";
-};
-
-&i2c1 {
-	i2c_rtc: rtc@68 {
-		compatible = "microcrystal,rv4162";
-		reg = <0x68>;
-		status = "okay";
-	};
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usdhc2 {
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1_id>;
-	dr_mode = "otg";
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
-			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
-			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_usb_otg1_id: usbotg1idgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID    0x17059
-		>;
-	};
-
-};
diff --git a/arch/arm/dts/imx6ull-phytec-phycore-som.dtsi b/arch/arm/dts/imx6ull-phytec-phycore-som.dtsi
new file mode 100644
index 0000000..56cd16e
--- /dev/null
+++ b/arch/arm/dts/imx6ull-phytec-phycore-som.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX6 ULL";
+	compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&iomuxc {
+	/delete-node/ gpioledssomgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_gpioleds_som: gpioledssomgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
new file mode 100644
index 0000000..9648d4e
--- /dev/null
+++ b/arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+#include "imx6ull-phytec-segin.dtsi"
+#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC";
+	compatible = "phytec,imx6ull-pbacd10-emmc", "phytec,imx6ull-pbacd10",
+		     "phytec,imx6ull-pcl063","fsl,imx6ull";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&tlv320 {
+	status = "okay";
+};
+
+&ecspi3 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&reg_can1_en {
+	status = "okay";
+};
+
+&reg_sound_1v8 {
+	status = "okay";
+};
+
+&reg_sound_3v3 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/imx6ull-phytec-segin-peb-eval-01.dtsi b/arch/arm/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
new file mode 100644
index 0000000..ff08d95
--- /dev/null
+++ b/arch/arm/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+
+&iomuxc {
+	/delete-node/ gpio_keysgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x79
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6ull-phytec-segin.dtsi b/arch/arm/dts/imx6ull-phytec-segin.dtsi
new file mode 100644
index 0000000..c1595fc
--- /dev/null
+++ b/arch/arm/dts/imx6ull-phytec-segin.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL";
+	compatible = "phytec,imx6ull-pbacd-10", "phytec,imx6ull-pcl063","fsl,imx6ull";
+};
+
+&iomuxc {
+	/delete-node/ flexcan1engrp;
+	/delete-node/ rtcintgrp;
+	/delete-node/ stmpegrp;
+};
+
+&iomuxc_snvs {
+	princtrl_flexcan1_en: flexcan1engrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+};
diff --git a/board/phytec/pcl063/MAINTAINERS b/board/phytec/pcl063/MAINTAINERS
index 710b968..02be541 100644
--- a/board/phytec/pcl063/MAINTAINERS
+++ b/board/phytec/pcl063/MAINTAINERS
@@ -2,10 +2,14 @@ PCL063 BOARD
 M:	Martyn Welch <martyn.welch@collabora.com>
 M:	Parthiban Nallathambi <parthitce@gmail.com>
 S:	Maintained
-F:	arch/arm/dts/imx6ul-pcl063.dtsi
-F:	arch/arm/dts/imx6ul-phycore-segin.dts
-F:	arch/arm/dts/imx6ull-phycore-segin.dts
-F:	arch/arm/dts/pcl063-common.dtsi
+F:	arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
+F:	arch/arm/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
+F:	arch/arm/dts/imx6ul-phytec-segin.dtsi
+F:	arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
+F:	arch/arm/dts/imx6ull-phytec-phycore-som.dtsi
+F:	arch/arm/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
+F:	arch/arm/dts/imx6ull-phytec-segin.dtsi
+F:	arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
 F:	arch/arm/dts/imx6ull-u-boot.dtsi
 F:	board/phytec/pcl063/
 F:	configs/phycore_pcl063_defconfig
diff --git a/configs/phycore_pcl063_defconfig b/configs/phycore_pcl063_defconfig
index b9c9a79..b9e725b 100644
--- a/configs/phycore_pcl063_defconfig
+++ b/configs/phycore_pcl063_defconfig
@@ -33,7 +33,7 @@ CONFIG_MTDPARTS_DEFAULT="gpmi-nand:4m(uboot),1m(env),-(root)"
 CONFIG_CMD_UBI=y
 # CONFIG_ISO_PARTITION is not set
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6ul-phycore-segin"
+CONFIG_DEFAULT_DEVICE_TREE="imx6ul-phytec-segin-ff-rdk-nand"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM_I2C_GPIO=y
 CONFIG_SYS_I2C_MXC=y
diff --git a/configs/phycore_pcl063_ull_defconfig b/configs/phycore_pcl063_ull_defconfig
index f2635ce..879ac78 100644
--- a/configs/phycore_pcl063_ull_defconfig
+++ b/configs/phycore_pcl063_ull_defconfig
@@ -29,7 +29,7 @@ CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_CACHE=y
 # CONFIG_ISO_PARTITION is not set
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6ull-phycore-segin"
+CONFIG_DEFAULT_DEVICE_TREE="imx6ull-phytec-segin-ff-rdk-emmc"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM_I2C_GPIO=y
 CONFIG_SYS_I2C_MXC=y