Add support for i.MXRT1020-EVK board

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

12 files changed, 544 insertions, 1 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f28da21..bb97955 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -732,7 +732,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mq-evk.dtb \
 	imx8mp-evk.dtb
 
-dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb
+dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \
+	imxrt1020-evk.dtb
 
 dtb-$(CONFIG_RCAR_GEN2) += \
 	r8a7790-lager-u-boot.dtb \
diff --git a/arch/arm/dts/imxrt1020-evk-u-boot.dtsi b/arch/arm/dts/imxrt1020-evk-u-boot.dtsi
new file mode 100644
index 0000000..d32c98d
--- /dev/null
+++ b/arch/arm/dts/imxrt1020-evk-u-boot.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+/ {
+	chosen {
+		u-boot,dm-spl;
+	};
+};
+
+&lpuart1 { /* console */
+	u-boot,dm-spl;
+};
+
+&semc {
+	bank1: bank@0 {
+		u-boot,dm-spl;
+	};
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+
+	imxrt1020-evk {
+		u-boot,dm-spl;
+		pinctrl_lpuart1: lpuart1grp {
+			u-boot,dm-spl;
+		};
+
+		pinctrl_semc: semcgrp {
+			u-boot,dm-spl;
+		};
+
+		pinctrl_usdhc0: usdhc0grp {
+			u-boot,dm-spl;
+		};
+	};
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/imxrt1020-evk.dts b/arch/arm/dts/imxrt1020-evk.dts
new file mode 100644
index 0000000..ece1360
--- /dev/null
+++ b/arch/arm/dts/imxrt1020-evk.dts
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+/dts-v1/;
+#include "imxrt1020.dtsi"
+#include "imxrt1020-evk-u-boot.dtsi"
+#include <dt-bindings/pinctrl/pins-imxrt1020.h>
+
+/ {
+	model = "NXP IMXRT1020-evk board";
+	compatible = "fsl,imxrt1020-evk", "fsl,imxrt1020";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x80000000 0x2000000>;
+	};
+};
+
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&semc {
+	/*
+	 * Memory configuration from sdram datasheet IS42S16160J-6TLI
+	 */
+	fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
+				MUX_CSX0_SDRAM_CS1
+				0
+				0
+				0
+				0>;
+	fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
+					BL_8
+					COL_9BITS
+					CL_3>;
+	fsl,sdram-timing = /bits/ 8 <0x2
+				     0x2
+				     0x9
+				     0x1
+				     0x5
+				     0x6
+
+				     0x20
+				     0x09
+				     0x01
+				     0x00
+
+				     0x04
+				     0x0A
+				     0x21
+				     0x50>;
+
+	bank1: bank@0 {
+		fsl,base-address = <0x80000000>;
+		fsl,memory-size = <MEM_SIZE_32M>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+
+	imxrt1020-evk {
+		pinctrl_lpuart1: lpuart1grp {
+			fsl,pins = <
+				MXRT1020_IOMUXC_GPIO_AD_B0_06_LPUART1_TX
+					0xf1
+				MXRT1020_IOMUXC_GPIO_AD_B0_07_LPUART1_RX
+					0xf1
+			>;
+		};
+
+		pinctrl_semc: semcgrp {
+			fsl,pins = <
+				MXRT1020_IOMUXC_GPIO_EMC_00_SEMC_DA00
+					0xf1	/* SEMC_D0 */
+				MXRT1020_IOMUXC_GPIO_EMC_01_SEMC_DA01
+					0xf1	/* SEMC_D1 */
+				MXRT1020_IOMUXC_GPIO_EMC_02_SEMC_DA02
+					0xf1	/* SEMC_D2 */
+				MXRT1020_IOMUXC_GPIO_EMC_03_SEMC_DA03
+					0xf1	/* SEMC_D3 */
+				MXRT1020_IOMUXC_GPIO_EMC_04_SEMC_DA04
+					0xf1	/* SEMC_D4 */
+				MXRT1020_IOMUXC_GPIO_EMC_05_SEMC_DA05
+					0xf1	/* SEMC_D5 */
+				MXRT1020_IOMUXC_GPIO_EMC_06_SEMC_DA06
+					0xf1	/* SEMC_D6 */
+				MXRT1020_IOMUXC_GPIO_EMC_07_SEMC_DA07
+					0xf1	/* SEMC_D7 */
+				MXRT1020_IOMUXC_GPIO_EMC_08_SEMC_DM00
+					0xf1	/* SEMC_DM0 */
+				MXRT1020_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
+					0xf1	/* SEMC_A0 */
+				MXRT1020_IOMUXC_GPIO_EMC_10_SEMC_CAS
+					0xf1	/* SEMC_CAS */
+				MXRT1020_IOMUXC_GPIO_EMC_11_SEMC_RAS
+					0xf1	/* SEMC_RAS */
+				MXRT1020_IOMUXC_GPIO_EMC_12_SEMC_CS0
+					0xf1	/* SEMC_CS0 */
+				MXRT1020_IOMUXC_GPIO_EMC_13_SEMC_BA0
+					0xf1	/* SEMC_BA0 */
+				MXRT1020_IOMUXC_GPIO_EMC_14_SEMC_BA1
+					0xf1	/* SEMC_BA1 */
+				MXRT1020_IOMUXC_GPIO_EMC_15_SEMC_ADDR10
+					0xf1	/* SEMC_A10 */
+				MXRT1020_IOMUXC_GPIO_EMC_16_SEMC_ADDR00
+					0xf1	/* SEMC_A0 */
+				MXRT1020_IOMUXC_GPIO_EMC_17_SEMC_ADDR01
+					0xf1	/* SEMC_A1 */
+				MXRT1020_IOMUXC_GPIO_EMC_18_SEMC_ADDR02
+					0xf1	/* SEMC_A2 */
+				MXRT1020_IOMUXC_GPIO_EMC_19_SEMC_ADDR03
+					0xf1	/* SEMC_A3 */
+				MXRT1020_IOMUXC_GPIO_EMC_20_SEMC_ADDR04
+					0xf1	/* SEMC_A4 */
+				MXRT1020_IOMUXC_GPIO_EMC_21_SEMC_ADDR05
+					0xf1	/* SEMC_A5 */
+				MXRT1020_IOMUXC_GPIO_EMC_22_SEMC_ADDR06
+					0xf1	/* SEMC_A6 */
+				MXRT1020_IOMUXC_GPIO_EMC_23_SEMC_ADDR07
+					0xf1	/* SEMC_A7 */
+				MXRT1020_IOMUXC_GPIO_EMC_24_SEMC_ADDR08
+					0xf1	/* SEMC_A8 */
+				MXRT1020_IOMUXC_GPIO_EMC_25_SEMC_ADDR09
+					0xf1	/* SEMC_A9 */
+				MXRT1020_IOMUXC_GPIO_EMC_26_SEMC_ADDR11
+					0xf1	/* SEMC_A11 */
+				MXRT1020_IOMUXC_GPIO_EMC_27_SEMC_ADDR12
+					0xf1	/* SEMC_A12 */
+				MXRT1020_IOMUXC_GPIO_EMC_28_SEMC_DQS
+					(IMX_PAD_SION | 0xf1)	/* SEMC_DQS */
+				MXRT1020_IOMUXC_GPIO_EMC_29_SEMC_CKE
+					0xf1	/* SEMC_CKE */
+				MXRT1020_IOMUXC_GPIO_EMC_30_SEMC_CLK
+					0xf1	/* SEMC_CLK */
+				MXRT1020_IOMUXC_GPIO_EMC_31_SEMC_DM01
+					0xf1	/* SEMC_DM01 */
+				MXRT1020_IOMUXC_GPIO_EMC_32_SEMC_DATA08
+					0xf1	/* SEMC_D8 */
+				MXRT1020_IOMUXC_GPIO_EMC_33_SEMC_DATA09
+					0xf1	/* SEMC_D9 */
+				MXRT1020_IOMUXC_GPIO_EMC_34_SEMC_DATA10
+					0xf1	/* SEMC_D10 */
+				MXRT1020_IOMUXC_GPIO_EMC_35_SEMC_DATA11
+					0xf1	/* SEMC_D11 */
+				MXRT1020_IOMUXC_GPIO_EMC_36_SEMC_DATA12
+					0xf1	/* SEMC_D12 */
+				MXRT1020_IOMUXC_GPIO_EMC_37_SEMC_DATA13
+					0xf1	/* SEMC_D13 */
+				MXRT1020_IOMUXC_GPIO_EMC_38_SEMC_DATA14
+					0xf1	/* SEMC_D14 */
+				MXRT1020_IOMUXC_GPIO_EMC_39_SEMC_DATA15
+					0xf1	/* SEMC_D15 */
+			>;
+		};
+
+		pinctrl_usdhc0: usdhc0grp {
+			fsl,pins = <
+				MXRT1020_IOMUXC_GPIO_SD_B0_06_USDHC1_CD_B
+					0x1B000
+				MXRT1020_IOMUXC_GPIO_SD_B0_02_USDHC1_CMD
+					0x17061
+				MXRT1020_IOMUXC_GPIO_SD_B0_03_USDHC1_CLK
+					0x17061
+				MXRT1020_IOMUXC_GPIO_SD_B0_01_USDHC1_DATA3
+					0x17061
+				MXRT1020_IOMUXC_GPIO_SD_B0_00_USDHC1_DATA2
+					0x17061
+				MXRT1020_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA1
+					0x17061
+				MXRT1020_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA0
+					0x17061
+			>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0>;
+	pinctrl-2 = <&pinctrl_usdhc0>;
+	pinctrl-3 = <&pinctrl_usdhc0>;
+	status = "okay";
+
+	cd-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/mach-imx/imxrt/Kconfig b/arch/arm/mach-imx/imxrt/Kconfig
index f28d52d..d275fdf 100644
--- a/arch/arm/mach-imx/imxrt/Kconfig
+++ b/arch/arm/mach-imx/imxrt/Kconfig
@@ -18,12 +18,17 @@ choice
 	prompt "NXP i.MXRT board select"
 	optional
 
+config TARGET_IMXRT1020_EVK
+	bool "Support imxrt1020 EVK board"
+	select IMXRT1020
+
 config TARGET_IMXRT1050_EVK
 	bool "Support imxrt1050 EVK board"
 	select IMXRT1050
 
 endchoice
 
+source "board/freescale/imxrt1020-evk/Kconfig"
 source "board/freescale/imxrt1050-evk/Kconfig"
 
 endif
diff --git a/board/freescale/imxrt1020-evk/Kconfig b/board/freescale/imxrt1020-evk/Kconfig
new file mode 100644
index 0000000..d00cbff
--- /dev/null
+++ b/board/freescale/imxrt1020-evk/Kconfig
@@ -0,0 +1,22 @@
+if TARGET_IMXRT1020_EVK
+
+config SYS_BOARD
+	string
+	default "imxrt1020-evk"
+
+config SYS_VENDOR
+	string
+	default "freescale"
+
+config SYS_SOC
+	string
+	default "imxrt1020"
+
+config SYS_CONFIG_NAME
+	string
+	default "imxrt1020-evk"
+
+config IMX_CONFIG
+	default "board/freescale/imxrt1020-evk/imximage.cfg"
+
+endif
diff --git a/board/freescale/imxrt1020-evk/MAINTAINERS b/board/freescale/imxrt1020-evk/MAINTAINERS
new file mode 100644
index 0000000..05f017b
--- /dev/null
+++ b/board/freescale/imxrt1020-evk/MAINTAINERS
@@ -0,0 +1,6 @@
+IMXRT1020 EVALUATION KIT
+M:	Giulio Benetti <giulio.benetti@benettiengineering.com>
+S:	Maintained
+F:	board/freescale/imxrt1020-evk
+F:	include/configs/imxrt1020-evk.h
+F:	configs/imxrt1020-evk_defconfig
diff --git a/board/freescale/imxrt1020-evk/Makefile b/board/freescale/imxrt1020-evk/Makefile
new file mode 100644
index 0000000..807dc7c
--- /dev/null
+++ b/board/freescale/imxrt1020-evk/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020
+# Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+
+obj-y	:= imxrt1020-evk.o
diff --git a/board/freescale/imxrt1020-evk/README b/board/freescale/imxrt1020-evk/README
new file mode 100644
index 0000000..3da72fd
--- /dev/null
+++ b/board/freescale/imxrt1020-evk/README
@@ -0,0 +1,31 @@
+How to use U-Boot on NXP i.MXRT1020 EVK
+-----------------------------------------------
+
+- Build U-Boot for i.MXRT1020 EVK:
+
+$ make mrproper
+$ make imxrt1020-evk_defconfig
+$ make
+
+This will generate the SPL image called SPL and the u-boot.img.
+
+- Flash the SPL image into the micro SD card:
+
+sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+
+- Flash the u-boot.img image into the micro SD card:
+
+sudo dd if=u-boot.img of=/dev/sdb bs=1k seek=128; sync
+
+- Jumper settings:
+
+SW8: 0 1 1 0
+
+where 0 means bottom position and 1 means top position (from the
+switch label numbers reference).
+
+- Connect the USB cable between the EVK and the PC for the console.
+(The USB console connector is the one close the ethernet connector)
+
+- Insert the micro SD card in the board, power it up and U-Boot messages should
+come up.
diff --git a/board/freescale/imxrt1020-evk/imximage.cfg b/board/freescale/imxrt1020-evk/imximage.cfg
new file mode 100644
index 0000000..9bcc2c1
--- /dev/null
+++ b/board/freescale/imxrt1020-evk/imximage.cfg
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi/sd/nand/onenand, qspi/nor
+ */
+
+BOOT_FROM	sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+
+/* Set all FlexRAM as OCRAM(01b) */
+DATA 4 0x400AC044 0x00005555
+/* Use FLEXRAM_BANK_CFG to config FlexRAM */
+SET_BIT 4 0x400AC040 0x4
diff --git a/board/freescale/imxrt1020-evk/imxrt1020-evk.c b/board/freescale/imxrt1020-evk/imxrt1020-evk.c
new file mode 100644
index 0000000..06ad524
--- /dev/null
+++ b/board/freescale/imxrt1020-evk/imxrt1020-evk.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <ram.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/armv7m.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+#ifndef CONFIG_SUPPORT_SPL
+	int rv;
+	struct udevice *dev;
+
+	rv = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (rv) {
+		debug("DRAM init failed: %d\n", rv);
+		return rv;
+	}
+
+#endif
+	return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+	return fdtdec_setup_memory_banksize();
+}
+
+#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+	debug("SPL: booting kernel\n");
+	/* break into full u-boot on 'c' */
+	return serial_tstc() && serial_getc() == 'c';
+}
+#endif
+
+int spl_dram_init(void)
+{
+	struct udevice *dev;
+	int rv;
+
+	rv = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (rv)
+		debug("DRAM init failed: %d\n", rv);
+	return rv;
+}
+
+void spl_board_init(void)
+{
+	spl_dram_init();
+	preloader_console_init();
+	arch_cpu_init(); /* to configure mpu for sdram rw permissions */
+}
+
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_MMC1;
+}
+#endif
+
+u32 get_board_rev(void)
+{
+	return 0;
+}
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
+
+	return 0;
+}
diff --git a/configs/imxrt1020-evk_defconfig b/configs/imxrt1020-evk_defconfig
new file mode 100644
index 0000000..2f35df1
--- /dev/null
+++ b/configs/imxrt1020-evk_defconfig
@@ -0,0 +1,67 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMXRT=y
+CONFIG_SYS_TEXT_BASE=0x80002000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_ENV_OFFSET=0x80000
+CONFIG_DM_GPIO=y
+CONFIG_TARGET_IMXRT1020_EVK=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_SIZE_LIMIT=131072
+CONFIG_SPL=y
+CONFIG_SPL_TEXT_BASE=0x20209000
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SD_BOOT=y
+# CONFIG_USE_BOOTCOMMAND is not set
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100
+# CONFIG_SPL_CRC32_SUPPORT is not set
+# CONFIG_SPL_DM_GPIO is not set
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_MII is not set
+# CONFIG_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imxrt1020-evk"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_TFTP_BLOCKSIZE=512
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+# CONFIG_OF_TRANSLATE is not set
+CONFIG_SPL_CLK_COMPOSITE_CCF=y
+CONFIG_CLK_COMPOSITE_CCF=y
+CONFIG_SPL_CLK_IMXRT1020=y
+CONFIG_CLK_IMXRT1020=y
+CONFIG_MXC_GPIO=y
+# CONFIG_INPUT is not set
+CONFIG_DM_MMC=y
+CONFIG_FSL_USDHC=y
+CONFIG_DM_ETH=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMXRT=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_IMXRT_SDRAM=y
+CONFIG_FSL_LPUART=y
+CONFIG_TIMER=y
+CONFIG_SPL_TIMER=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
+CONFIG_HEXDUMP=y
diff --git a/include/configs/imxrt1020-evk.h b/include/configs/imxrt1020-evk.h
new file mode 100644
index 0000000..8e54565
--- /dev/null
+++ b/include/configs/imxrt1020-evk.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#ifndef __IMXRT1020_EVK_H
+#define __IMXRT1020_EVK_H
+
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_SYS_INIT_SP_ADDR		0x20240000
+
+#ifdef CONFIG_SUPPORT_SPL
+#define CONFIG_SYS_LOAD_ADDR		0x20209000
+#else
+#define CONFIG_SYS_LOAD_ADDR		0x80000000
+#define CONFIG_LOADADDR			0x80000000
+#endif
+
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC135		1
+#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE	1
+
+#define PHYS_SDRAM			0x80000000
+#define PHYS_SDRAM_SIZE			(32 * 1024 * 1024)
+
+#define DMAMEM_SZ_ALL			(1 * 1024 * 1024)
+#define DMAMEM_BASE			(PHYS_SDRAM + PHYS_SDRAM_SIZE - \
+					 DMAMEM_SZ_ALL)
+
+#define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
+
+/*
+ * Configuration of the external SDRAM memory
+ */
+#define CONFIG_SYS_MALLOC_LEN		(1 * 1024 * 1024)
+
+/* For SPL */
+#ifdef CONFIG_SUPPORT_SPL
+#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SYS_SPL_LEN		0x00008000
+#define CONFIG_SYS_UBOOT_START		0x800023FD
+#endif
+/* For SPL ends */
+
+#endif /* __IMXRT1020_EVK_H */