board: verdin-imx8mp: update ddrc config for different lpddr4 memories

Add support to Verdin IMX8MP V1.1B SKU which uses
MT53E1G32D2FW-046 WT:B memory.
Compared to the 8 GB memory (MT53E2G32D4NQ-046 WT:A) used on
Verdin IMX8MP V1.0A it has 16 row addresses instead of 17.
In fact, the new memory, is a 2 GB/rank memory. The 8 GB memory is a
4 GB/rank memory.

Manually tweaking Host Interface addresses vs LPDDR4 signals mapping it
is possible to have a single configuration working with both memories:
 - Old configuration: HIF bit 30 -> rank, HIF bit 29 -> Row 16
 - New configuration: HIF bit 29 -> rank, HIF bit 30 -> Row 16

With this change the memory space from the host processor is contiguous
for both the configurations and the correct memory size is computed
using get_ram_size() at runtime.

Support for single rank memories still works thanks to the fact
dual ranks training fails (ddr_init->ddr_cfg_phy) toward single rank
memories.

Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

2 files changed, 4 insertions, 5 deletions

diff --git a/board/toradex/verdin-imx8mp/lpddr4_timing.c b/board/toradex/verdin-imx8mp/lpddr4_timing.c
index 3e00d9b..314b74e 100644
--- a/board/toradex/verdin-imx8mp/lpddr4_timing.c
+++ b/board/toradex/verdin-imx8mp/lpddr4_timing.c
@@ -55,13 +55,13 @@ struct dram_cfg_param ddr_ddrc_cfg[] = {
 	{ 0x3d4001c4, 0x1 },
 	{ 0x3d4000f4, 0xc99 },
 	{ 0x3d400108, 0x9121c1c },
-	{ 0x3d400200, 0x18 },
+	{ 0x3d400200, 0x17 },
 	{ 0x3d40020c, 0x0 },
 	{ 0x3d400210, 0x1f1f },
 	{ 0x3d400204, 0x80808 },
 	{ 0x3d400214, 0x7070707 },
 	{ 0x3d400218, 0x7070707 },
-	{ 0x3d40021c, 0xf07 },
+	{ 0x3d40021c, 0xf08 },
 	{ 0x3d400250, 0x1705 },
 	{ 0x3d400254, 0x2c },
 	{ 0x3d40025c, 0x4000030 },
diff --git a/board/toradex/verdin-imx8mp/spl.c b/board/toradex/verdin-imx8mp/spl.c
index ea99e37..7b383cc 100644
--- a/board/toradex/verdin-imx8mp/spl.c
+++ b/board/toradex/verdin-imx8mp/spl.c
@@ -34,11 +34,10 @@ int spl_board_boot_device(enum boot_device boot_dev_spl)
 void spl_dram_init(void)
 {
 	/*
-	 * try configuring for quad die, dual rank aka 8 GB falling back to
-	 * dual die, single rank aka 1 GB (untested), 2 GB or 4 GB if it fails
+	 * Try configuring for dual rank memory falling back to single rank
 	 */
 	if (ddr_init(&dram_timing)) {
-		printf("Quad die, dual rank failed, attempting dual die, single rank configuration.\n");
+		printf("Dual rank failed, attempting single rank configuration.\n");
 		ddr_init(&dram_timing2);
 	}
 }