configs: Remove a number of unreferenced CONFIG options.

There are a large number of options under CONFIG_SYS (but some of these
are elsewhere, spotted while cleaning CONFIG_SYS) that are never
referenced, or only used slightly later in the config file.  Remove or
restructure these.

Signed-off-by: Tom Rini <trini@konsulko.com>

28 files changed, 6 insertions, 130 deletions

diff --git a/doc/arch/m68k.rst b/doc/arch/m68k.rst
index 698e288..87a51e5 100644
--- a/doc/arch/m68k.rst
+++ b/doc/arch/m68k.rst
@@ -114,8 +114,6 @@ apply to one or more cpu for the ColdFire family:
 
 CONFIG_SYS_MBAR:
   defines the base address of the MCF5272 configuration registers
-CONFIG_SYS_ENET_BD_BASE:
-  defines the base address of the FEC buffer descriptors
 CONFIG_SYS_SCR:
   defines the contents of the System Configuration Register
 CONFIG_SYS_SPR:
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index 9f64834..75278f4 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -125,9 +125,6 @@
 #define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CEIB | \
 					 CF_CACR_DBWE)
 
-/* Port configuration */
-#define CONFIG_SYS_FECI2C		0xF0
-
 #define CONFIG_SYS_CS0_BASE		0xFF800000
 #define CONFIG_SYS_CS0_MASK		0x007F0021
 #define CONFIG_SYS_CS0_CTRL		0x00001D80
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 1fd5121..35ff267 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -122,9 +122,4 @@
 #define CONFIG_SYS_CS1_CTRL		0x00001900
 #define CONFIG_SYS_CS1_MASK		0x00070001
 
-/*-----------------------------------------------------------------------
- * Port configuration
- */
-#define CONFIG_SYS_FECI2C		0x0FA0
-
 #endif	/* _M5275EVB_H */
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 69a5df6..de5f42b 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -100,13 +100,6 @@
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
 #endif
 
-#define CONFIG_SYS_FLASH_BR_PRELIM \
-		(BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
-		BR_PS_16 | BR_V)
-#define CONFIG_SYS_FLASH_OR_PRELIM \
-		((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
-		 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
-
 #define CONFIG_FSL_CPLD
 #define CPLD_BASE		0xffdf0000	/* CPLD registers */
 #ifdef CONFIG_PHYS_64BIT
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 02a5e94c..2dc6bd2 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -95,6 +95,4 @@
 #define CONFIG_SYS_FLASH_BASE		NAND_BASE
 #endif
 
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-
 #endif /* __CONFIG_H */
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index 6691b88..adfadd7 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -62,9 +62,6 @@
 #define CONFIG_SYS_CPU_CLK		(CONFIG_SYS_CLK * 3)
 #define CONFIG_SYS_SDRAM_SIZE		32		/* SDRAM size in MB */
 
-#define CONFIG_SYS_CORE_SRAM_SIZE	0x8000
-#define CONFIG_SYS_CORE_SRAM		0x80000000
-
 /*
  * Define baudrate for UART1 (console output, tftp, ...)
  * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud
@@ -208,7 +205,6 @@
 /* FLASH organization */
 
 #define CONFIG_SYS_FLASH_SIZE		0x2000000
-#define CONFIG_SYS_FLASH_CFI_NONBLOCK	1
 
 #define LDS_BOARD_TEXT \
 	. = DEFINED(env_offset) ? env_offset : .; \
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 789e6a4..6cb1a10 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -143,8 +143,4 @@ NANDTGTS \
 #define CONFIG_NAND_OMAP_GPMC_WSCFG	1
 #endif /* CONFIG_MTD_RAW_NAND */
 
-#if defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_SYS_ENV_SECT_SIZE	CONFIG_ENV_SIZE
-#endif
-
 #endif	/* ! __CONFIG_BRPPT1_H__ */
diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
index 965eba5..fdbcbf5 100644
--- a/include/configs/chiliboard.h
+++ b/include/configs/chiliboard.h
@@ -119,10 +119,4 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
 
-#if defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_SYS_ENV_SECT_SIZE	CONFIG_SYS_NAND_BLOCK_SIZE
-#endif
-
-/* Network. */
-
 #endif	/* ! __CONFIG_CHILIBOARD_H */
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 4baf7f7..84b4271 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -79,8 +79,6 @@
 
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-
 /* GPIO pin + bank to pin ID mapping */
 #define GPIO_PIN(_bank, _pin)		((_bank << 5) + _pin)
 
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index c29abd1..ba0662f 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -143,13 +143,6 @@ enter a valid image address in flash */
 #define CONFIG_SYS_SCR			0x0003
 #define CONFIG_SYS_SPR			0xffff
 
-/* ---
- * Ethernet settings
- * ---
- */
-
-#define CONFIG_SYS_ENET_BD_BASE	0x780000
-
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in internal SRAM)
  */
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 7615696..a4fb2b5 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -92,12 +92,6 @@
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
 #endif
 
-#define CONFIG_SYS_FLASH_BR_PRELIM \
-		(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
-		 | BR_PS_16 | BR_V)
-#define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
-					| OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
-
 #define PIXIS_BASE		0xffdf0000	/* PIXIS registers */
 #ifdef CONFIG_PHYS_64BIT
 #define PIXIS_BASE_PHYS		0xfffdf0000ull
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index f699cb10..58c9024 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -134,7 +134,6 @@
 #endif
 
 #ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_SYS_FLASH_SECT_SZ	(128 << 10) /* 128KB */
 #define CONFIG_SYS_FLASH_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
 #define PHYS_FLASH_SIZE			(8 << 20) /* Flash size 8MB */
 #endif
diff --git a/include/configs/etamin.h b/include/configs/etamin.h
index 3acc62d..7923fbb 100644
--- a/include/configs/etamin.h
+++ b/include/configs/etamin.h
@@ -15,7 +15,6 @@
 #include "siemens-am33x-common.h"
 /* NAND specific changes for etamin due to different page size */
 #undef CONFIG_SYS_NAND_ECCPOS
-#undef CONFIG_SYS_ENV_SECT_SIZE
 
 #define CONFIG_SYS_ENV_SECT_SIZE       (512 << 10)     /* 512 KiB */
 #define CONFIG_SYS_NAND_ECCPOS	{ 2, 3, 4, 5, 6, 7, 8, 9, \
diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index 1b97e54..e89b800 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -123,17 +123,10 @@
 #define CONFIG_SYS_MRAM_BASE		0xE2000000
 #define CONFIG_SYS_MRAM_SIZE		0x20000	/* 128 Kb */
 
-#define CONFIG_SYS_OR_TIMING_MRAM
-
-
 /*
  * CPLD setup
  */
 #define CONFIG_SYS_CPLD_BASE		0xE3000000
-#define CONFIG_SYS_CPLD_SIZE		0x8000
-
-#define CONFIG_SYS_OR_TIMING_MRAM
-
 
 /*
  * HW-Watchdog
diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h
index 6becd7c..20a36fb 100644
--- a/include/configs/km/km-powerpc.h
+++ b/include/configs/km/km-powerpc.h
@@ -9,9 +9,6 @@
 
 /* Do boardspecific init for all boards */
 
-/* EEprom support 24C08, 24C16, 24C64 */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
-
 /* Increase max size of compressed kernel */
 
 /******************************************************************************
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index eee71db..a91e5e8 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -97,9 +97,6 @@ extern void __set_direction(unsigned pin, int high);
 #define I2C_DELAY	udelay(1)
 #define I2C_SOFT_DECLARATIONS
 
-/* EEprom support 24C128, 24C256 valid for environment eeprom */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
-
 /*
  *  Environment variables configurations
  */
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index b124ce5..48fe828 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -60,28 +60,6 @@
 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 
-/* DSPI */
-#define CONFIG_FSL_DSPI1
-
-#define MMAP_DSPI          DSPI1_BASE_ADDR
-
-#define CONFIG_SYS_DSPI_CTAR0   1
-
-#define CONFIG_SYS_DSPI_CTAR1	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
-				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
-				DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \
-				DSPI_CTAR_DT(0))
-
-#define CONFIG_SYS_DSPI_CTAR2	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
-				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
-				DSPI_CTAR_CSSCK(0) | DSPI_CTAR_ASC(0) | \
-				DSPI_CTAR_DT(0))
-
-#define CONFIG_SYS_DSPI_CTAR3	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
-				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
-				DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \
-				DSPI_CTAR_DT(0))
-
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"verify=no\0"				\
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index c2ad2af..f6efda2 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -208,10 +208,6 @@
 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
 #endif
 
-/* Debug Server firmware */
-#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
-#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR	0x580D00000ULL
-
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 
 /*
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 23ddae1..c6b601d 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -179,10 +179,6 @@
 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
 #endif
-
-/* Debug Server firmware */
-#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
-#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR	0x580D00000ULL
 #endif
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 
diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index 7bfc04f..c76e7ea 100644
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -31,7 +31,6 @@
 
 #ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
-#define CONFIG_SYS_FLASH_SECT_SIZE      (128 * 1024)
 #endif
 
 #define CONFIG_SYS_FSL_USDHC_NUM	2
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 2cd42e5..ad3dbbc 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -26,7 +26,6 @@
                                          10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE         512
 #define CONFIG_SYS_NAND_ECCBYTES        3
-#define CONFIG_SYS_ENV_SECT_SIZE        SZ_128K
 /* NAND: SPL falcon mode configs */
 #endif /* CONFIG_MTD_RAW_NAND */
 
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 2683d4c..c47d557 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -31,7 +31,6 @@
                                          10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE         512
 #define CONFIG_SYS_NAND_ECCBYTES        3
-#define CONFIG_SYS_ENV_SECT_SIZE        SZ_128K
 #endif /* CONFIG_MTD_RAW_NAND */
 
 #define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 81c1692..1af87b2 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -152,6 +152,4 @@
 
 #define CONFIG_SYS_FLASH_SIZE		0x4000000
 
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-
 #endif /* __CONFIG_H */
diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h
index 31e94df..5181792 100644
--- a/include/configs/qemu-ppce500.h
+++ b/include/configs/qemu-ppce500.h
@@ -33,8 +33,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_SYS_BOOT_BLOCK		0x00000000	/* boot TLB */
-
 #define CONFIG_HWCONFIG
 
 #define CONFIG_SYS_INIT_RAM_ADDR		0x00100000
diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h
index 4359357..ae94f0e 100644
--- a/include/configs/s5p4418_nanopi2.h
+++ b/include/configs/s5p4418_nanopi2.h
@@ -18,11 +18,10 @@
 /*-----------------------------------------------------------------------
  *  System memory Configuration
  */
-#define CONFIG_SYS_MEM_SIZE		0x40000000
 #define CONFIG_SYS_SDRAM_BASE		0x71000000
 
 /*
- * "(CONFIG_SYS_MEM_SIZE - CONFIG_SYS_RESERVE_MEM_SIZE)" has been used in
+ * "(0x40000000 - CONFIG_SYS_RESERVE_MEM_SIZE)" has been used in
  * u-boot nanopi2-v2016.01.
  * This is not working anymore because boot_fdt_add_mem_rsv_regions() in
  * common/image-fdt.c has been extended:
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index d2d4296..fcb0fd5 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -370,9 +370,6 @@
 							/* CS0 */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND
 							   devices */
-#if !defined(CONFIG_SPI_BOOT)
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#endif
 #endif
 
 #endif	/* ! __CONFIG_SIEMENS_AM33X_COMMON_H */
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index d3eb01b..7c0856a 100644
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -167,10 +167,7 @@
 		"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0"
 
 /* FLASH and environment organization */
-#define PHYS_FLASH_SIZE			0x04000000	/* 64MB */
 #define CONFIG_SYS_FLASH_SIZE		0x04000000
-#define CONFIG_SYS_FLASH_BASE0		V2M_NOR0
-#define CONFIG_SYS_FLASH_BASE1		V2M_NOR1
 
 /* Timeout values in ticks */
 
@@ -183,7 +180,6 @@
  */
 
 /* Store environment at top of flash */
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE0, \
-					  CONFIG_SYS_FLASH_BASE1 }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ V2M_NOR0, V2M_NOR1 }
 
 #endif /* VEXPRESS_COMMON_H */
diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h
index 526165c..ad8ea65 100644
--- a/include/configs/xtfpga.h
+++ b/include/configs/xtfpga.h
@@ -76,13 +76,12 @@
 
 #if defined(CONFIG_MAX_MEM_MAPPED) && \
 	CONFIG_MAX_MEM_MAPPED < CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SYS_MEMORY_SIZE		CONFIG_MAX_MEM_MAPPED
+#define XTENSA_SYS_TEXT_ADDR		\
+	(MEMADDR(CONFIG_MAX_MEM_MAPPED) - CONFIG_SYS_MONITOR_LEN)
 #else
-#define CONFIG_SYS_MEMORY_SIZE		CONFIG_SYS_SDRAM_SIZE
-#endif
-
 #define XTENSA_SYS_TEXT_ADDR		\
-	(MEMADDR(CONFIG_SYS_MEMORY_SIZE) - CONFIG_SYS_MONITOR_LEN)
+	(MEMADDR(CONFIG_SYS_SDRAM_SIZE) - CONFIG_SYS_MONITOR_LEN)
+#endif
 
 /*==============================*/
 /* U-Boot general configuration */
@@ -105,18 +104,6 @@
  * SHIFT left amount and field WIDTH (bits), and also by a bitMASK.
  */
 
-/* Date of FPGA bitstream build in binary coded decimal (BCD) */
-#define CONFIG_SYS_FPGAREG_DATE		IOADDR(0x0D020000)
-#define FPGAREG_MTH_SHIFT		24		/* BCD month 1..12 */
-#define FPGAREG_MTH_WIDTH		8
-#define FPGAREG_MTH_MASK		0xFF000000
-#define FPGAREG_DAY_SHIFT		16		/* BCD day 1..31 */
-#define FPGAREG_DAY_WIDTH		8
-#define FPGAREG_DAY_MASK		0x00FF0000
-#define FPGAREG_YEAR_SHIFT		0		/* BCD year 2001..9999*/
-#define FPGAREG_YEAR_WIDTH		16
-#define FPGAREG_YEAR_MASK		0x0000FFFF
-
 /* FPGA core clock frequency in Hz (also input to UART) */
 #define CONFIG_SYS_FPGAREG_FREQ	IOADDR(0x0D020004)	/* CPU clock frequency*/
 
@@ -166,17 +153,14 @@
 
 #ifdef CONFIG_XTFPGA_LX60
 # define CONFIG_SYS_FLASH_SIZE		0x0040000	/* 4MB */
-# define CONFIG_SYS_FLASH_SECT_SZ	0x10000		/* block size 64KB */
 # define CONFIG_SYS_FLASH_PARMSECT_SZ	0x2000		/* param size  8KB */
 # define CONFIG_SYS_FLASH_BASE		IOADDR(0x08000000)
 #elif defined(CONFIG_XTFPGA_KC705)
 # define CONFIG_SYS_FLASH_SIZE		0x8000000	/* 128MB */
-# define CONFIG_SYS_FLASH_SECT_SZ	0x20000		/* block size 128KB */
 # define CONFIG_SYS_FLASH_PARMSECT_SZ	0x8000		/* param size 32KB */
 # define CONFIG_SYS_FLASH_BASE		IOADDR(0x00000000)
 #else
 # define CONFIG_SYS_FLASH_SIZE		0x1000000	/* 16MB */
-# define CONFIG_SYS_FLASH_SECT_SZ	0x20000		/* block size 128KB */
 # define CONFIG_SYS_FLASH_PARMSECT_SZ	0x8000		/* param size 32KB */
 # define CONFIG_SYS_FLASH_BASE		IOADDR(0x08000000)
 #endif