usb: ohci-hcd: Remove some unused legacy code

At this point, the only user of ohci-hcd that also uses PCI is using DM,
so we can drop CONFIG_PCI_OHCI* usage.  No platforms set either of
CONFIG_SYS_USB_OHCI_BOARD_INIT or CONFIG_SYS_USB_OHCI_CPU_INIT so those
hooks can be removed as well.

Signed-off-by: Tom Rini <trini@konsulko.com>

3 files changed, 0 insertions, 126 deletions

diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci
index 65b0896..a7da4bc 100644
--- a/doc/README.generic_usb_ohci
+++ b/doc/README.generic_usb_ohci
@@ -11,18 +11,6 @@ Configuration options
 
 	CONFIG_USB_OHCI_NEW: enable the new OHCI driver
 
-	CONFIG_SYS_USB_OHCI_BOARD_INIT: call the board dependant hooks:
-
-		  - extern int board_usb_init(void);
-		  - extern int usb_board_stop(void);
-		  - extern int usb_cpu_init_fail(void);
-
-	CONFIG_SYS_USB_OHCI_CPU_INIT: call the cpu dependant hooks:
-
-		  - extern int usb_cpu_init(void);
-		  - extern int usb_cpu_stop(void);
-		  - extern int usb_cpu_init_fail(void);
-
 	CONFIG_SYS_USB_OHCI_REGS_BASE: defines the base address of the OHCI
 				registers
 
@@ -43,21 +31,3 @@ config option
 
 needs to be defined.
 
-
-PCI Controllers
-----------------
-
-You'll need to define
-
-	CONFIG_PCI_OHCI
-
-If you have several USB PCI controllers, define
-
-	CONFIG_PCI_OHCI_DEVNO: number of the OHCI device in PCI list
-
-If undefined, the first instance found in PCI space will be used.
-
-PCI Controllers need to do byte swapping on register accesses, so they
-should to define:
-
-	CONFIG_SYS_OHCI_SWAP_REG_ACCESS
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index fedf0db..9acef5e 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -35,13 +35,6 @@
 #include <asm/cache.h>
 #include <linux/delay.h>
 
-#if defined(CONFIG_PCI_OHCI)
-# include <pci.h>
-#if !defined(CONFIG_PCI_OHCI_DEVNO)
-#define CONFIG_PCI_OHCI_DEVNO	0
-#endif
-#endif
-
 #include <malloc.h>
 #include <memalign.h>
 #include <usb.h>
@@ -53,7 +46,6 @@
 #endif
 
 #if defined(CONFIG_CPU_ARM920T) || \
-	defined(CONFIG_PCI_OHCI) || \
 	defined(CONFIG_PCI) || \
 	defined(CONFIG_SYS_OHCI_USE_NPS)
 # define OHCI_USE_NPS		/* force NoPowerSwitching mode */
@@ -68,26 +60,6 @@
 #define OHCI_CONTROL_INIT \
 	(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
 
-#if !CONFIG_IS_ENABLED(DM_USB)
-#ifdef CONFIG_PCI_OHCI
-static struct pci_device_id ohci_pci_ids[] = {
-	{0x10b9, 0x5237},	/* ULI1575 PCI OHCI module ids */
-	{0x1033, 0x0035},	/* NEC PCI OHCI module ids */
-	{0x1131, 0x1561},	/* Philips 1561 PCI OHCI module ids */
-	/* Please add supported PCI OHCI controller ids here */
-	{0, 0}
-};
-#endif
-#endif
-
-#ifdef CONFIG_PCI_EHCI_DEVNO
-static struct pci_device_id ehci_pci_ids[] = {
-	{0x1131, 0x1562},	/* Philips 1562 PCI EHCI module ids */
-	/* Please add supported PCI EHCI controller ids here */
-	{0, 0}
-};
-#endif
-
 #ifdef DEBUG
 #define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
 #else
@@ -2007,21 +1979,6 @@ static char ohci_inited = 0;
 
 int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
 {
-#ifdef CONFIG_PCI_OHCI
-	pci_dev_t pdev;
-#endif
-
-#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
-	/* cpu dependant init */
-	if (usb_cpu_init())
-		return -1;
-#endif
-
-#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
-	/*  board dependant init */
-	if (board_usb_init(index, USB_INIT_HOST))
-		return -1;
-#endif
 	memset(&gohci, 0, sizeof(ohci_t));
 
 	/* align the storage */
@@ -2036,28 +1993,7 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
 	gohci.disabled = 1;
 	gohci.sleeping = 0;
 	gohci.irq = -1;
-#ifdef CONFIG_PCI_OHCI
-	pdev = pci_find_devices(ohci_pci_ids, CONFIG_PCI_OHCI_DEVNO);
-
-	if (pdev != -1) {
-		u16 vid, did;
-		u32 base;
-		pci_read_config_word(pdev, PCI_VENDOR_ID, &vid);
-		pci_read_config_word(pdev, PCI_DEVICE_ID, &did);
-		printf("OHCI pci controller (%04x, %04x) found @(%d:%d:%d)\n",
-				vid, did, (pdev >> 16) & 0xff,
-				(pdev >> 11) & 0x1f, (pdev >> 8) & 0x7);
-		pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base);
-		printf("OHCI regs address 0x%08x\n", base);
-		gohci.regs = (struct ohci_regs *)base;
-	} else {
-		printf("%s: OHCI devnr: %d not found\n", __func__,
-		       CONFIG_PCI_OHCI_DEVNO);
-		return -1;
-	}
-#else
 	gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE;
-#endif
 
 	gohci.flags = 0;
 	gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME;
@@ -2065,15 +2001,6 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
 	if (hc_reset (&gohci) < 0) {
 		hc_release_ohci (&gohci);
 		err ("can't reset usb-%s", gohci.slot_name);
-#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
-		/* board dependant cleanup */
-		board_usb_cleanup(index, USB_INIT_HOST);
-#endif
-
-#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
-		/* cpu dependant cleanup */
-		usb_cpu_init_fail();
-#endif
 		return -1;
 	}
 
@@ -2081,15 +2008,6 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
 		err("can't start usb-%s", gohci.slot_name);
 		hc_release_ohci(&gohci);
 		/* Initialization failed */
-#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
-		/* board dependant cleanup */
-		usb_board_stop();
-#endif
-
-#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
-		/* cpu dependant cleanup */
-		usb_cpu_stop();
-#endif
 		return -1;
 	}
 
@@ -2112,17 +2030,6 @@ int usb_lowlevel_stop(int index)
 	/* call hc_release_ohci() here ? */
 	hc_reset(&gohci);
 
-#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
-	/* board dependant cleanup */
-	if (usb_board_stop())
-		return -1;
-#endif
-
-#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
-	/* cpu dependant cleanup */
-	if (usb_cpu_stop())
-		return -1;
-#endif
 	/* This driver is no longer initialised. It needs a new low-level
 	 * init (board/cpu) before it can be used again. */
 	ohci_inited = 0;
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index db28268..5dc8d85 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -222,7 +222,4 @@
 
 /* pass open firmware flat tree */
 
-/* USB support */
-#define CONFIG_PCI_OHCI			1
-
 #endif	/* __CONFIG_H */