configs: enable DM_ETH support for LS1046ARDB

Enable DM_ETH on all the defconfigs for the LS1046ARDB board.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

8 files changed, 24 insertions, 0 deletions

diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig
index bbb352d..777f818 100644
--- a/configs/ls1046ardb_emmc_defconfig
+++ b/configs/ls1046ardb_emmc_defconfig
@@ -31,6 +31,7 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -56,6 +57,8 @@ CONFIG_MTD_RAW_NAND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_PCI=y
diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
index b9c8a88..450c2d0 100644
--- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
@@ -15,6 +15,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
 CONFIG_MISC_INIT_R=y
+CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -37,6 +38,8 @@ CONFIG_MTD_RAW_NAND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_PCI=y
diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig
index 51edada..25665ba 100644
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -16,6 +16,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
 CONFIG_MISC_INIT_R=y
+CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -40,6 +41,8 @@ CONFIG_MTD_RAW_NAND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_PCI=y
diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig
index 84e0596..e33b641 100644
--- a/configs/ls1046ardb_qspi_spl_defconfig
+++ b/configs/ls1046ardb_qspi_spl_defconfig
@@ -33,6 +33,7 @@ CONFIG_SPL_OS_BOOT=y
 CONFIG_SYS_OS_BASE=0x40980000
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_CMD_SPL=y
+CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -58,6 +59,8 @@ CONFIG_MTD_RAW_NAND=y
 # CONFIG_SPI_FLASH_BAR is not set
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index 9954e89..b7e4d8e 100644
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -30,6 +30,7 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -52,6 +53,8 @@ CONFIG_MTD_RAW_NAND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_PCI=y
diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig
index 3502809..2861acb 100644
--- a/configs/ls1046ardb_sdcard_defconfig
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -30,6 +30,7 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -55,6 +56,8 @@ CONFIG_MTD_RAW_NAND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_PCI=y
diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
index 9e3042b..159cd71 100644
--- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
@@ -16,6 +16,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
 CONFIG_MISC_INIT_R=y
+CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -37,6 +38,8 @@ CONFIG_MTD_RAW_NAND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_PCI=y
diff --git a/configs/ls1046ardb_tfa_defconfig b/configs/ls1046ardb_tfa_defconfig
index 2f7686b..5d4d952 100644
--- a/configs/ls1046ardb_tfa_defconfig
+++ b/configs/ls1046ardb_tfa_defconfig
@@ -17,6 +17,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
 CONFIG_MISC_INIT_R=y
+CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -42,6 +43,8 @@ CONFIG_MTD_RAW_NAND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_PCI=y