Merge https://source.denx.de/u-boot/custodians/u-boot-usb

4 files changed, 50 insertions, 12 deletions

diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index afad260..352d86f 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -17,6 +17,9 @@
 #include <stdio_dev.h>
 #include <watchdog.h>
 #include <asm/byteorder.h>
+#ifdef CONFIG_SANDBOX
+#include <asm/state.h>
+#endif
 
 #include <usb.h>
 
@@ -118,7 +121,7 @@ struct usb_kbd_pdata {
 extern int __maybe_unused net_busy_flag;
 
 /* The period of time between two calls of usb_kbd_testc(). */
-static unsigned long __maybe_unused kbd_testc_tms;
+static unsigned long kbd_testc_tms;
 
 /* Puts character in the queue and sets up the in and out pointer. */
 static void usb_kbd_put_queue(struct usb_kbd_pdata *data, u8 c)
@@ -394,21 +397,39 @@ static int usb_kbd_testc(struct stdio_dev *sdev)
 	struct usb_device *usb_kbd_dev;
 	struct usb_kbd_pdata *data;
 
+	/*
+	 * Polling the keyboard for an event can take dozens of milliseconds.
+	 * Add a delay between polls to avoid blocking activity which polls
+	 * rapidly, like the UEFI console timer.
+	 */
+	unsigned long poll_delay = CONFIG_SYS_HZ / 50;
+
 #ifdef CONFIG_CMD_NET
 	/*
 	 * If net_busy_flag is 1, NET transfer is running,
 	 * then we check key-pressed every second (first check may be
 	 * less than 1 second) to improve TFTP booting performance.
 	 */
-	if (net_busy_flag && (get_timer(kbd_testc_tms) < CONFIG_SYS_HZ))
-		return 0;
-	kbd_testc_tms = get_timer(0);
+	if (net_busy_flag)
+		poll_delay = CONFIG_SYS_HZ;
+#endif
+
+#ifdef CONFIG_SANDBOX
+	/*
+	 * Skip delaying polls if a test requests it.
+	 */
+	if (state_get_skip_delays())
+		poll_delay = 0;
 #endif
+
 	dev = stdio_get_by_name(sdev->name);
 	usb_kbd_dev = (struct usb_device *)dev->priv;
 	data = usb_kbd_dev->privptr;
 
-	usb_kbd_poll_for_event(usb_kbd_dev);
+	if (get_timer(kbd_testc_tms) >= poll_delay) {
+		usb_kbd_poll_for_event(usb_kbd_dev);
+		kbd_testc_tms = get_timer(0);
+	}
 
 	return !(data->usb_in_pointer == data->usb_out_pointer);
 }
diff --git a/drivers/usb/gadget/ci_udc.c b/drivers/usb/gadget/ci_udc.c
index 226a9e6..542684c 100644
--- a/drivers/usb/gadget/ci_udc.c
+++ b/drivers/usb/gadget/ci_udc.c
@@ -402,6 +402,9 @@ align:
 
 flush:
 	hwaddr = (unsigned long)ci_req->hw_buf;
+	if (!hwaddr)
+		return 0;
+
 	aligned_used_len = roundup(req->length, ARCH_DMA_MINALIGN);
 	flush_dcache_range(hwaddr, hwaddr + aligned_used_len);
 
@@ -415,7 +418,7 @@ static void ci_debounce(struct ci_req *ci_req, int in)
 	unsigned long hwaddr = (unsigned long)ci_req->hw_buf;
 	uint32_t aligned_used_len;
 
-	if (in)
+	if (in || !hwaddr)
 		return;
 
 	aligned_used_len = roundup(req->actual, ARCH_DMA_MINALIGN);
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index 1bd6147..060b02a 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -543,7 +543,7 @@ static int ehci_usb_phy_mode(struct udevice *dev)
 			plat->init_type = USB_INIT_DEVICE;
 		else
 			plat->init_type = USB_INIT_HOST;
-	} else if (is_mx7()) {
+	} else if (is_mx7() || is_imx8mm() || is_imx8mn()) {
 		phy_status = (void __iomem *)(addr +
 					      USBNC_PHY_STATUS_OFFSET);
 		val = readl(phy_status);
@@ -573,9 +573,8 @@ static int ehci_usb_of_to_plat(struct udevice *dev)
 	case USB_DR_MODE_PERIPHERAL:
 		plat->init_type = USB_INIT_DEVICE;
 		break;
-	case USB_DR_MODE_OTG:
-	case USB_DR_MODE_UNKNOWN:
-		return ehci_usb_phy_mode(dev);
+	default:
+		plat->init_type = USB_INIT_UNKNOWN;
 	};
 
 	return 0;
@@ -677,6 +676,20 @@ static int ehci_usb_probe(struct udevice *dev)
 	mdelay(1);
 #endif
 
+	/*
+	 * If the device tree didn't specify host or device,
+	 * the default is USB_INIT_UNKNOWN, so we need to check
+	 * the register. For imx8mm and imx8mn, the clocks need to be
+	 * running first, so we defer the check until they are.
+	 */
+	if (priv->init_type == USB_INIT_UNKNOWN) {
+		ret = ehci_usb_phy_mode(dev);
+		if (ret)
+			goto err_clk;
+		else
+			priv->init_type = plat->init_type;
+	}
+
 #if CONFIG_IS_ENABLED(DM_REGULATOR)
 	ret = device_get_supply_regulator(dev, "vbus-supply",
 					  &priv->vbus_supply);
@@ -741,8 +754,8 @@ err_regulator:
 #if CONFIG_IS_ENABLED(DM_REGULATOR)
 	if (priv->vbus_supply)
 		regulator_set_enable(priv->vbus_supply, false);
-err_clk:
 #endif
+err_clk:
 #if CONFIG_IS_ENABLED(CLK)
 	clk_disable(&priv->clk);
 #else
diff --git a/include/usb.h b/include/usb.h
index f032de8..7e3796b 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -163,7 +163,8 @@ struct int_queue;
  */
 enum usb_init_type {
 	USB_INIT_HOST,
-	USB_INIT_DEVICE
+	USB_INIT_DEVICE,
+	USB_INIT_UNKNOWN,
 };
 
 /**********************************************************************