diff options
author | Anup Patel <apatel@ventanamicro.com> | 2022-01-27 11:41:10 +0530 |
---|---|---|
committer | Leo Yu-Chi Liang <ycliang@andestech.com> | 2022-02-10 11:19:15 +0800 |
commit | 7c08680aa32db12e5a7e2765cfc8b7e8ce8895ff (patch) | |
tree | 25cbc74dfbb6b9368135f276dce4b8993f58581a | |
parent | ef19131b800806a129df5468aef1d2c5de9b0a89 (diff) | |
download | u-boot-7c08680aa32db12e5a7e2765cfc8b7e8ce8895ff.zip u-boot-7c08680aa32db12e5a7e2765cfc8b7e8ce8895ff.tar.gz u-boot-7c08680aa32db12e5a7e2765cfc8b7e8ce8895ff.tar.bz2 |
doc: qemu-riscv: Update documentation for QEMU spike machine
We can now use same U-Boot images on both QEMU virt machine and QEMU
spike machine so let's update the QEMU RISC-V documentation.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
-rw-r--r-- | doc/board/emulation/qemu-riscv.rst | 48 |
1 files changed, 32 insertions, 16 deletions
diff --git a/doc/board/emulation/qemu-riscv.rst b/doc/board/emulation/qemu-riscv.rst index 3409fff..ae99881 100644 --- a/doc/board/emulation/qemu-riscv.rst +++ b/doc/board/emulation/qemu-riscv.rst @@ -4,19 +4,24 @@ QEMU RISC-V =========== -QEMU for RISC-V supports a special 'virt' machine designed for emulation and -virtualization purposes. This document describes how to run U-Boot under it. -Both 32-bit and 64-bit targets are supported, running in either machine or -supervisor mode. +QEMU for RISC-V supports a special 'virt' machine and 'spike' machine designed +for emulation and virtualization purposes. This document describes how to run +U-Boot under it. Both 32-bit and 64-bit targets are supported, running in +either machine or supervisor mode. The QEMU virt machine models a generic RISC-V virtual machine with support for the VirtIO standard networking and block storage devices. It has CLINT, PLIC, 16550A UART devices in addition to VirtIO and it also uses device-tree to pass -configuration information to guest software. It implements RISC-V privileged +configuration information to guest software. It implements the latest RISC-V +privileged architecture. See :doc:`../../develop/devicetree/dt_qemu` for information on how to see the devicetree actually generated by QEMU. -architecture spec v1.10. + +The QEMU spike machine models a minimalistic RISC-V virtual machine with +only CLINT and HTIF devices. It also uses device-tree to pass configuration +information to guest software and implements the latest RISC-V privileged +architecture. Building U-Boot --------------- @@ -41,13 +46,17 @@ Running U-Boot -------------- The minimal QEMU command line to get U-Boot up and running is: -- For 32-bit RISC-V:: +- For 32-bit RISC-V virt machine:: - qemu-system-riscv32 -nographic -machine virt -bios u-boot + qemu-system-riscv32 -nographic -machine virt -bios u-boot.bin -- For 64-bit RISC-V:: +- For 64-bit RISC-V virt machine:: + + qemu-system-riscv64 -nographic -machine virt -bios u-boot.bin + +- For 64-bit RISC-V spike machine:: - qemu-system-riscv64 -nographic -machine virt -bios u-boot + qemu-system-riscv64 -nographic -machine spike -bios u-boot.bin The commands above create targets with 128MiB memory by default. A freely configurable amount of RAM can be created via the '-m' @@ -58,6 +67,7 @@ the new setting. For instructions on how to run U-Boot in supervisor mode on QEMU with OpenSBI, see the documentation available with OpenSBI: https://github.com/riscv/opensbi/blob/master/docs/platform/qemu_virt.md +https://github.com/riscv/opensbi/blob/master/docs/platform/spike.md These have been tested in QEMU 5.0.0. @@ -80,8 +90,9 @@ supported by U-Boot. Clone the OpenSBI repository and run the following command. See the OpenSBI documentation for full details: https://github.com/riscv/opensbi/blob/master/docs/platform/qemu_virt.md +https://github.com/riscv/opensbi/blob/master/docs/platform/spike.md -To make the FW_DYNAMIC binary (build/platform/qemu/virt/firmware/fw_dynamic.bin) +To make the FW_DYNAMIC binary (build/platform/generic/firmware/fw_dynamic.bin) available to U-Boot, either copy it into the U-Boot root directory or specify its location with the OPENSBI environment variable. Afterwards, compile U-Boot with the following commands. @@ -99,17 +110,22 @@ with the following commands. The minimal QEMU commands to run U-Boot SPL in both 32-bit and 64-bit configurations are: -- For 32-bit RISC-V:: +- For 32-bit RISC-V virt machine:: - qemu-system-riscv32 -nographic -machine virt -bios spl/u-boot-spl \ + qemu-system-riscv32 -nographic -machine virt -bios spl/u-boot-spl.bin \ -device loader,file=u-boot.itb,addr=0x80200000 -- For 64-bit RISC-V:: +- For 64-bit RISC-V virt machine:: + + qemu-system-riscv64 -nographic -machine virt -bios spl/u-boot-spl.bin \ + -device loader,file=u-boot.itb,addr=0x80200000 + +- For 64-bit RISC-V spike machine:: - qemu-system-riscv64 -nographic -machine virt -bios spl/u-boot-spl \ + qemu-system-riscv64 -nographic -machine spike -bios spl/u-boot-spl.bin \ -device loader,file=u-boot.itb,addr=0x80200000 -An attached disk can be emulated by adding:: +An attached disk can be emulated in RISC-V virt machine by adding:: -device ich9-ahci,id=ahci \ -drive if=none,file=riscv64.img,format=raw,id=mydisk \ |