Merge branch '2021-07-18-finalize-migrations'

- With the deadline for DM_USB (host controller support), DM_VIDEO,
  DM_SPI_FLASH and DM_PCI now at 2 years past the release where their
  migration deadline was given, finish removing platforms and enforcing
  the switch.

114 files changed, 75 insertions, 7615 deletions

diff --git a/Makefile b/Makefile
index bc404c8..ca2432c 100644
--- a/Makefile
+++ b/Makefile
@@ -1125,13 +1125,6 @@ ifneq ($(CONFIG_DM),y)
 	@echo >&2 "See doc/driver-model/migration.rst for more info."
 	@echo >&2 "===================================================="
 endif
-	$(call deprecated,CONFIG_DM_USB CONFIG_OF_CONTROL CONFIG_BLK,\
-		USB,v2019.07,$(CONFIG_USB))
-	$(call deprecated,CONFIG_DM_PCI,PCI,v2019.07,$(CONFIG_PCI))
-	$(call deprecated,CONFIG_DM_VIDEO,video,v2019.07,\
-		$(CONFIG_LCD)$(CONFIG_VIDEO))
-	$(call deprecated,CONFIG_DM_SPI_FLASH,SPI flash,v2019.07,\
-		$(CONFIG_SPI_FLASH))
 	$(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
 		$(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
 	$(call deprecated,CONFIG_DM_ETH,Ethernet drivers,v2020.07,$(CONFIG_NET))
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7f493a8..9de97cc 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -984,7 +984,7 @@ config ARCH_SUNXI
 	select BINMAN
 	select CMD_GPIO
 	select CMD_MMC if MMC
-	select CMD_USB if DISTRO_DEFAULTS
+	select CMD_USB if DISTRO_DEFAULTS && USB_HOST
 	select CLK
 	select DM
 	select DM_ETH
@@ -993,7 +993,6 @@ config ARCH_SUNXI
 	select DM_MMC if MMC
 	select DM_SCSI if SCSI
 	select DM_SERIAL
-	select DM_USB if DISTRO_DEFAULTS
 	select GPIO_EXTRA_HEADER
 	select OF_BOARD_SETUP
 	select OF_CONTROL
@@ -1006,8 +1005,8 @@ config ARCH_SUNXI
 	select SYS_NS16550
 	select SYS_THUMB_BUILD if !ARM64
 	select USB if DISTRO_DEFAULTS
-	select USB_KEYBOARD if DISTRO_DEFAULTS
-	select USB_STORAGE if DISTRO_DEFAULTS
+	select USB_KEYBOARD if DISTRO_DEFAULTS && USB_HOST
+	select USB_STORAGE if DISTRO_DEFAULTS && USB_HOST
 	select SPL_USE_TINY_PRINTF
 	select USE_PREBOOT
 	select SYS_RELOC_GD_ENV_ADDR
@@ -1035,7 +1034,6 @@ config ARCH_U8500
 	select DM_GPIO
 	select DM_MMC if MMC
 	select DM_SERIAL
-	select DM_USB if USB
 	select OF_CONTROL
 	select SYSRESET
 	select TIMER
@@ -1078,7 +1076,6 @@ config ARCH_ZYNQ
 	select DM_SERIAL
 	select DM_SPI
 	select DM_SPI_FLASH
-	select DM_USB if USB
 	select GPIO_EXTRA_HEADER
 	select OF_CONTROL
 	select SPI
@@ -1122,7 +1119,6 @@ config ARCH_ZYNQMP
 	select DM_SERIAL
 	select DM_SPI if SPI
 	select DM_SPI_FLASH if DM_SPI
-	select DM_USB if USB
 	select FIRMWARE
 	select GPIO_EXTRA_HEADER
 	select OF_CONTROL
@@ -1177,7 +1173,6 @@ config TARGET_VEXPRESS64_JUNO
 	select DM_ETH
 	select BLK
 	select USB
-	select DM_USB
 
 config TARGET_TOTAL_COMPUTE
 	bool "Support Total Compute Platform"
@@ -1343,7 +1338,6 @@ config TARGET_POPLAR
 	select ARM64
 	select DM
 	select DM_SERIAL
-	select DM_USB
 	select GPIO_EXTRA_HEADER
 	select OF_CONTROL
 	select PL01X_SERIAL
@@ -1681,7 +1675,6 @@ config TARGET_SL28
 	select DM_SCSI
 	select DM_SERIAL
 	select DM_SPI
-	select DM_USB
 	select GPIO_EXTRA_HEADER
 	select SPL_DM if SPL
 	select SPL_DM_SPI if SPL
@@ -1708,7 +1701,6 @@ config ARCH_UNIPHIER
 	select DM_MTD
 	select DM_RESET
 	select DM_SERIAL
-	select DM_USB
 	select OF_BOARD_SETUP
 	select OF_CONTROL
 	select OF_LIBFDT
@@ -1809,7 +1801,6 @@ config ARCH_ROCKCHIP
 	select DM_SERIAL
 	select DM_SPI
 	select DM_SPI_FLASH
-	select DM_USB if USB
 	select ENABLE_ARM_SOC_BOOT0_HOOK
 	select OF_CONTROL
 	select SPI
diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig
index 580b458..494e213 100644
--- a/arch/arm/mach-imx/mx5/Kconfig
+++ b/arch/arm/mach-imx/mx5/Kconfig
@@ -29,7 +29,6 @@ config TARGET_KP_IMX53
 	select DM_SERIAL
 	select DM_MMC
 	select BLK
-	select DM_USB
 	select DM_REGULATOR
 	select MX53
 	imply CMD_DM
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 23cab39..a03eca8 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -239,7 +239,6 @@ config TARGET_KOSAGI_NOVENA
 	select DM_MMC
 	select DM_PCI
 	select DM_SCSI
-	select DM_USB
 	select DM_VIDEO
 	select OF_CONTROL
 	select SUPPORT_SPL
@@ -556,7 +555,6 @@ config TARGET_KP_IMX6Q_TPC
 	select DM_SERIAL
 	select DM_I2C
 	select DM_GPIO
-	select DM_USB
 	select SUPPORT_SPL
 	select SPL_SEPARATE_BSS if SPL
 	imply CMD_DM
diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig
index 11e54cd..53abc92 100644
--- a/arch/arm/mach-omap2/am33xx/Kconfig
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
@@ -94,7 +94,6 @@ config TARGET_AM335X_GUARDIAN
 	select DM
 	select DM_SERIAL
 	select DM_GPIO
-	select DM_USB
 
 config TARGET_AM335X_SL50
 	bool "Support am335x_sl50"
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index cf45d78..1ab37cc 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -53,12 +53,6 @@ config MCF5441x
         select DM_SERIAL
 	bool
 
-config MCF5445x
-	select OF_CONTROL
-	select DM
-        select DM_SERIAL
-	bool
-
 config MCF5227x
 	select OF_CONTROL
 	select DM
@@ -119,26 +113,10 @@ config M54418
 	bool
 	select MCF5441x
 
-config M54451
-	bool
-	select MCF5445x
-
-config M54455
-	bool
-	select MCF5445x
-
-config M52277
-	bool
-	select MCF5227x
-
 choice
 	prompt "Target select"
 	optional
 
-config TARGET_M52277EVB
-	bool "Support M52277EVB"
-	select M52277
-
 config TARGET_M5235EVB
 	bool "Support M5235EVB"
 	select M5235
@@ -191,18 +169,6 @@ config TARGET_M5373EVB
 	bool "Support M5373EVB"
 	select M5373
 
-config TARGET_M54418TWR
-	bool "Support M54418TWR"
-	select M54418
-
-config TARGET_M54451EVB
-	bool "Support M54451EVB"
-	select M54451
-
-config TARGET_M54455EVB
-	bool "Support M54455EVB"
-	select M54455
-
 config TARGET_AMCORE
 	bool "Support AMCORE"
 	select M5307
@@ -217,7 +183,6 @@ source "board/BuS/eb_cpu5282/Kconfig"
 source "board/astro/mcf5373l/Kconfig"
 source "board/cobra5272/Kconfig"
 source "board/freescale/m5208evbe/Kconfig"
-source "board/freescale/m52277evb/Kconfig"
 source "board/freescale/m5235evb/Kconfig"
 source "board/freescale/m5249evb/Kconfig"
 source "board/freescale/m5253demo/Kconfig"
@@ -227,9 +192,6 @@ source "board/freescale/m5282evb/Kconfig"
 source "board/freescale/m53017evb/Kconfig"
 source "board/freescale/m5329evb/Kconfig"
 source "board/freescale/m5373evb/Kconfig"
-source "board/freescale/m54418twr/Kconfig"
-source "board/freescale/m54451evb/Kconfig"
-source "board/freescale/m54455evb/Kconfig"
 source "board/sysam/amcore/Kconfig"
 source "board/sysam/stmark2/Kconfig"
 
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 86b36e1..63f1810 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -18,13 +18,11 @@ cpuflags-$(CONFIG_M5307)	:= -mcpu=5307
 cpuflags-$(CONFIG_MCF5301x)	:= -mcpu=53015 -fPIC
 cpuflags-$(CONFIG_MCF532x)	:= -mcpu=5329 -fPIC
 cpuflags-$(CONFIG_MCF5441x)	:= -mcpu=54418 -fPIC
-cpuflags-$(CONFIG_MCF5445x)	:= -mcpu=54455 -fPIC
 
 PLATFORM_CPPFLAGS += $(cpuflags-y)
 
 
 ldflags-$(CONFIG_MCF5441x)	:= --got=single
-ldflags-$(CONFIG_MCF5445x)	:= --got=single
 
 ifneq (,$(findstring -linux-,$(shell $(CC) --version)))
 ifneq (,$(findstring GOT,$(shell $(LD) --help)))
diff --git a/arch/m68k/cpu/mcf5445x/cpu_init.c b/arch/m68k/cpu/mcf5445x/cpu_init.c
index 9deab51..9b3f9f0 100644
--- a/arch/m68k/cpu/mcf5445x/cpu_init.c
+++ b/arch/m68k/cpu/mcf5445x/cpu_init.c
@@ -73,13 +73,6 @@ void cfspi_port_conf(void)
 {
 	gpio_t *gpio = (gpio_t *)MMAP_GPIO;
 
-#ifdef CONFIG_MCF5445x
-	out_8(&gpio->par_dspi,
-	      GPIO_PAR_DSPI_SIN_SIN |
-	      GPIO_PAR_DSPI_SOUT_SOUT |
-	      GPIO_PAR_DSPI_SCK_SCK);
-#endif
-
 #ifdef CONFIG_MCF5441x
 	pm_t *pm = (pm_t *)MMAP_PM;
 
@@ -212,36 +205,6 @@ void cpu_init_f(void)
 #endif
 #endif		/* CONFIG_MCF5441x */
 
-#ifdef CONFIG_MCF5445x
-	scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
-
-	out_be32(&scm1->mpr, 0x77777777);
-	out_be32(&scm1->pacra, 0);
-	out_be32(&scm1->pacrb, 0);
-	out_be32(&scm1->pacrc, 0);
-	out_be32(&scm1->pacrd, 0);
-	out_be32(&scm1->pacre, 0);
-	out_be32(&scm1->pacrf, 0);
-	out_be32(&scm1->pacrg, 0);
-
-	/* FlexBus */
-	out_8(&gpio->par_be,
-		GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 |
-		GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0);
-	out_8(&gpio->par_fbctl,
-		GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA |
-		GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS);
-
-#ifdef CONFIG_CF_SPI
-	cfspi_port_conf();
-#endif
-
-#ifdef CONFIG_SYS_FSL_I2C
-	out_be16(&gpio->par_feci2c,
-		GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
-#endif
-#endif		/* CONFIG_MCF5445x */
-
 	/* FlexBus Chipselect */
 	init_fbcs();
 
@@ -365,40 +328,6 @@ void uart_port_conf(int port)
 			GPIO_PAR_CANI2C_CAN1TX_U9TXD | GPIO_PAR_CANI2C_CAN1RX_U9RXD);
 		break;
 #endif
-#ifdef CONFIG_MCF5445x
-	case 0:
-		clrbits_8(&gpio->par_uart,
-			GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
-		setbits_8(&gpio->par_uart,
-			GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
-		break;
-	case 1:
-#ifdef CONFIG_SYS_UART1_PRI_GPIO
-		clrbits_8(&gpio->par_uart,
-			GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
-		setbits_8(&gpio->par_uart,
-			GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
-#elif defined(CONFIG_SYS_UART1_ALT1_GPIO)
-		clrbits_be16(&gpio->par_ssi,
-			~(GPIO_PAR_SSI_SRXD_UNMASK | GPIO_PAR_SSI_STXD_UNMASK));
-		setbits_be16(&gpio->par_ssi,
-			GPIO_PAR_SSI_SRXD_U1RXD | GPIO_PAR_SSI_STXD_U1TXD);
-#endif
-		break;
-	case 2:
-#if defined(CONFIG_SYS_UART2_ALT1_GPIO)
-		clrbits_8(&gpio->par_timer,
-			~(GPIO_PAR_TIMER_T3IN_UNMASK | GPIO_PAR_TIMER_T2IN_UNMASK));
-		setbits_8(&gpio->par_timer,
-			GPIO_PAR_TIMER_T3IN_U2RXD | GPIO_PAR_TIMER_T2IN_U2TXD);
-#elif defined(CONFIG_SYS_UART2_ALT2_GPIO)
-		clrbits_8(&gpio->par_timer,
-			~(GPIO_PAR_FECI2C_SCL_UNMASK | GPIO_PAR_FECI2C_SDA_UNMASK));
-		setbits_8(&gpio->par_timer,
-			GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD);
-#endif
-		break;
-#endif	/* CONFIG_MCF5445x */
 	}
 }
 
@@ -411,46 +340,6 @@ int fecpin_setclear(fec_info_t *info, int setclear)
 	if (fec_get_base_addr(0, &fec0_base))
 		return -1;
 
-#ifdef CONFIG_MCF5445x
-	if (setclear) {
-#ifdef CONFIG_SYS_FEC_NO_SHARED_PHY
-		if (info->iobase == fec0_base)
-			setbits_be16(&gpio->par_feci2c,
-				GPIO_PAR_FECI2C_MDC0_MDC0 |
-				GPIO_PAR_FECI2C_MDIO0_MDIO0);
-		else
-			setbits_be16(&gpio->par_feci2c,
-				GPIO_PAR_FECI2C_MDC1_MDC1 |
-				GPIO_PAR_FECI2C_MDIO1_MDIO1);
-#else
-		setbits_be16(&gpio->par_feci2c,
-			GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-#endif
-
-		if (info->iobase == fec0_base)
-			setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC0_RMII_GPIO);
-		else
-			setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC1_RMII_ATA);
-	} else {
-		clrbits_be16(&gpio->par_feci2c,
-			GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == fec0_base) {
-#ifdef CONFIG_SYS_FEC_FULL_MII
-			setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC0_MII);
-#else
-			clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC0_UNMASK);
-#endif
-		} else {
-#ifdef CONFIG_SYS_FEC_FULL_MII
-			setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC1_MII);
-#else
-			clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC1_UNMASK);
-#endif
-		}
-	}
-#endif	/* CONFIG_MCF5445x */
-
 #ifdef CONFIG_MCF5441x
 	if (setclear) {
 		out_8(&gpio->par_fec, 0x03);
diff --git a/arch/m68k/cpu/mcf5445x/dspi.c b/arch/m68k/cpu/mcf5445x/dspi.c
index b0e2f2c..456af17 100644
--- a/arch/m68k/cpu/mcf5445x/dspi.c
+++ b/arch/m68k/cpu/mcf5445x/dspi.c
@@ -15,30 +15,6 @@ void dspi_chip_select(int cs)
 {
 	struct gpio *gpio = (struct gpio *)MMAP_GPIO;
 
-#ifdef CONFIG_MCF5445x
-	switch (cs) {
-	case 0:
-		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
-		setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
-		break;
-	case 1:
-		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
-		setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
-		break;
-	case 2:
-		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
-		setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
-		break;
-	case 3:
-		clrbits_8(&gpio->par_dma, ~GPIO_PAR_DMA_DACK0_UNMASK);
-		setbits_8(&gpio->par_dma, GPIO_PAR_DMA_DACK0_PCS3);
-		break;
-	case 5:
-		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
-		setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
-		break;
-	}
-#endif
 #ifdef CONFIG_MCF5441x
 	switch (cs) {
 	case 0:
@@ -61,25 +37,6 @@ void dspi_chip_unselect(int cs)
 {
 	struct gpio *gpio = (struct gpio *)MMAP_GPIO;
 
-#ifdef CONFIG_MCF5445x
-	switch (cs) {
-	case 0:
-		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
-		break;
-	case 1:
-		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
-		break;
-	case 2:
-		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
-		break;
-	case 3:
-		clrbits_8(&gpio->par_dma, ~GPIO_PAR_DMA_DACK0_UNMASK);
-		break;
-	case 5:
-		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
-		break;
-	}
-#endif
 #ifdef CONFIG_MCF5441x
 	if (cs == 1)
 		clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
diff --git a/arch/m68k/cpu/mcf5445x/speed.c b/arch/m68k/cpu/mcf5445x/speed.c
index a0b9af8..eb73da6 100644
--- a/arch/m68k/cpu/mcf5445x/speed.c
+++ b/arch/m68k/cpu/mcf5445x/speed.c
@@ -42,11 +42,6 @@ void clock_enter_limp(int lpdiv)
 	/* Round divider down to nearest power of two */
 	for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ;
 
-#ifdef CONFIG_MCF5445x
-	/* Apply the divider to the system clock */
-	clrsetbits_be16(&ccm->cdr, 0x0f00, CCM_CDR_LPDIV(i));
-#endif
-
 	/* Enable Limp Mode */
 	setbits_be16(&ccm->misccr, CCM_MISCCR_LIMP);
 }
@@ -127,154 +122,12 @@ void setup_5441x_clocks(void)
 }
 #endif
 
-#ifdef CONFIG_MCF5445x
-void setup_5445x_clocks(void)
-{
-	ccm_t *ccm = (ccm_t *)MMAP_CCM;
-	pll_t *pll = (pll_t *)MMAP_PLL;
-	int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 };
-	int pllmult_pci[] = { 12, 6, 16, 8 };
-	int vco = 0, temp, fbtemp, pcrvalue;
-	int *pPllmult = NULL;
-	u16 fbpll_mask;
-#ifdef CONFIG_PCI
-	int bPci;
-#endif
-
-#ifdef CONFIG_M54455EVB
-	u8 *cpld = (u8 *)(CONFIG_SYS_CS2_BASE + 3);
-#endif
-	u8 bootmode;
-
-	/* To determine PCI is present or not */
-	if (((in_be16(&ccm->ccr) & CCM_CCR_360_FBCONFIG_MASK) == 0x00e0) ||
-	    ((in_be16(&ccm->ccr) & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) {
-		pPllmult = &pllmult_pci[0];
-		fbpll_mask = 3;		/* 11b */
-#ifdef CONFIG_PCI
-		bPci = 1;
-#endif
-	} else {
-		pPllmult = &pllmult_nopci[0];
-		fbpll_mask = 7;		/* 111b */
-#ifdef CONFIG_PCI
-		gd->pci_clk = 0;
-		bPci = 0;
-#endif
-	}
-
-#ifdef CONFIG_M54455EVB
-	bootmode = (in_8(cpld) & 0x03);
-
-	if (bootmode != 3) {
-		/* Temporary read from CCR- fixed fb issue, must be the same clock
-		   as pci or input clock, causing cpld/fpga read inconsistancy */
-		fbtemp = pPllmult[ccm->ccr & fbpll_mask];
-
-		/* Break down into small pieces, code still in flex bus */
-		pcrvalue = in_be32(&pll->pcr) & 0xFFFFF0FF;
-		temp = fbtemp - 1;
-		pcrvalue |= PLL_PCR_OUTDIV3(temp);
-
-		out_be32(&pll->pcr, pcrvalue);
-	}
-#endif
-#ifdef CONFIG_M54451EVB
-	/* No external logic to read the bootmode, hard coded from built */
-#ifdef CONFIG_CF_SBF
-	bootmode = 3;
-#else
-	bootmode = 2;
-
-	/* default value is 16 mul, set to 20 mul */
-	pcrvalue = (in_be32(&pll->pcr) & 0x00FFFFFF) | 0x14000000;
-	out_be32(&pll->pcr, pcrvalue);
-	while ((in_be32(&pll->psr) & PLL_PSR_LOCK) != PLL_PSR_LOCK)
-		;
-#endif
-#endif
-
-	if (bootmode == 0) {
-		/* RCON mode */
-		vco = pPllmult[ccm->rcon & fbpll_mask] * CONFIG_SYS_INPUT_CLKSRC;
-
-		if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) {
-			/* invaild range, re-set in PCR */
-			int temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV2_MASK) >> 4) + 1;
-			int i, j, bus;
-
-			j = (in_be32(&pll->pcr) & 0xFF000000) >> 24;
-			for (i = j; i < 0xFF; i++) {
-				vco = i * CONFIG_SYS_INPUT_CLKSRC;
-				if (vco >= CLOCK_PLL_FVCO_MIN) {
-					bus = vco / temp;
-					if (bus <= CLOCK_PLL_FSYS_MIN - MHZ)
-						continue;
-					else
-						break;
-				}
-			}
-			pcrvalue = in_be32(&pll->pcr) & 0x00FF00FF;
-			fbtemp = ((i - 1) << 8) | ((i - 1) << 12);
-			pcrvalue |= ((i << 24) | fbtemp);
-
-			out_be32(&pll->pcr, pcrvalue);
-		}
-		gd->arch.vco_clk = vco;	/* Vco clock */
-	} else if (bootmode == 2) {
-		/* Normal mode */
-		vco =  ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
-		if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) {
-			/* Default value */
-			pcrvalue = (in_be32(&pll->pcr) & 0x00FFFFFF);
-			pcrvalue |= pPllmult[in_be16(&ccm->ccr) & fbpll_mask] << 24;
-			out_be32(&pll->pcr, pcrvalue);
-			vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
-		}
-		gd->arch.vco_clk = vco;	/* Vco clock */
-	} else if (bootmode == 3) {
-		/* serial mode */
-		vco =  ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
-		gd->arch.vco_clk = vco;	/* Vco clock */
-	}
-
-	if ((in_be16(&ccm->ccr) & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) {
-		/* Limp mode */
-	} else {
-		gd->arch.inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */
-
-		temp = (in_be32(&pll->pcr) & PLL_PCR_OUTDIV1_MASK) + 1;
-		gd->cpu_clk = vco / temp;	/* cpu clock */
-
-		temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV2_MASK) >> 4) + 1;
-		gd->bus_clk = vco / temp;	/* bus clock */
-
-		temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV3_MASK) >> 8) + 1;
-		gd->arch.flb_clk = vco / temp;	/* FlexBus clock */
-
-#ifdef CONFIG_PCI
-		if (bPci) {
-			temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV4_MASK) >> 12) + 1;
-			gd->pci_clk = vco / temp;	/* PCI clock */
-		}
-#endif
-	}
-
-#ifdef CONFIG_SYS_I2C_FSL
-	gd->arch.i2c1_clk = gd->bus_clk;
-#endif
-}
-#endif
-
 /* get_clocks() fills in gd->cpu_clock and gd->bus_clk */
 int get_clocks(void)
 {
 #ifdef CONFIG_MCF5441x
 	setup_5441x_clocks();
 #endif
-#ifdef CONFIG_MCF5445x
-	setup_5445x_clocks();
-#endif
 
 #ifdef CONFIG_SYS_FSL_I2C
 	gd->arch.i2c1_clk = gd->bus_clk;
diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S
index 80eb287..7007d78 100644
--- a/arch/m68k/cpu/mcf5445x/start.S
+++ b/arch/m68k/cpu/mcf5445x/start.S
@@ -202,10 +202,6 @@ asm_dspi_init:
 	move.b	#0x80, (%a2)
 #endif
 
-#ifdef CONFIG_MCF5445x
-	move.l	#0xFC0A4063, %a0
-	move.b	#0x7F, (%a0)
-#endif
 	/* Configure DSPI module */
 	move.l	#0xFC05C000, %a0
 	move.l	#0x80FF0C00, (%a0)	/* Master, clear TX/RX FIFO */
@@ -214,9 +210,6 @@ asm_dspi_init:
 #ifdef CONFIG_MCF5441x
 	move.l	#0x3E000016, (%a0)
 #endif
-#ifdef CONFIG_MCF5445x
-	move.l	#0x3E000011, (%a0)
-#endif
 
 	move.l	#0xFC05C034, %a2	/* dtfr */
 	move.l	#0xFC05C03B, %a3	/* drfr */
diff --git a/arch/m68k/dts/M52277EVB.dts b/arch/m68k/dts/M52277EVB.dts
deleted file mode 100644
index a2210c8..0000000
--- a/arch/m68k/dts/M52277EVB.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5227x.dtsi"
-
-/ {
-	model = "Freescale M52277EVB";
-	compatible = "fsl,M52277EVB";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
diff --git a/arch/m68k/dts/M52277EVB_stmicro.dts b/arch/m68k/dts/M52277EVB_stmicro.dts
deleted file mode 100644
index 5fd3ca5..0000000
--- a/arch/m68k/dts/M52277EVB_stmicro.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5227x.dtsi"
-
-/ {
-	model = "Freescale M52277_stmicro";
-	compatible = "fsl,M52277_stmicro";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
diff --git a/arch/m68k/dts/M54418TWR.dts b/arch/m68k/dts/M54418TWR.dts
deleted file mode 100644
index 058707f..0000000
--- a/arch/m68k/dts/M54418TWR.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5441x.dtsi"
-
-/ {
-	model = "Freescale M54418TWR";
-	compatible = "fsl,M54418TWR";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
-
-&fec0 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-	mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M54418TWR_nand_mii.dts b/arch/m68k/dts/M54418TWR_nand_mii.dts
deleted file mode 100644
index 8afcb0f..0000000
--- a/arch/m68k/dts/M54418TWR_nand_mii.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5441x.dtsi"
-
-/ {
-	model = "Freescale M54418TWR_nand_mii";
-	compatible = "fsl,M54418TWR_nand_mii";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
-
-&fec0 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-	mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M54418TWR_nand_rmii.dts b/arch/m68k/dts/M54418TWR_nand_rmii.dts
deleted file mode 100644
index fc2eb5b..0000000
--- a/arch/m68k/dts/M54418TWR_nand_rmii.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5441x.dtsi"
-
-/ {
-	model = "Freescale M54418TWR_nand_rmii";
-	compatible = "fsl,M54418TWR_nand_rmii";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
-
-&fec0 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-	mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M54418TWR_nand_rmii_lowfreq.dts b/arch/m68k/dts/M54418TWR_nand_rmii_lowfreq.dts
deleted file mode 100644
index a39d102..0000000
--- a/arch/m68k/dts/M54418TWR_nand_rmii_lowfreq.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5441x.dtsi"
-
-/ {
-	model = "Freescale M54418TWR_nand_rmii_lowfreq";
-	compatible = "fsl,M54418TWR_nand_rmii_lowfreq";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
-
-&fec0 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-	mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M54418TWR_serial_mii.dts b/arch/m68k/dts/M54418TWR_serial_mii.dts
deleted file mode 100644
index edf98db..0000000
--- a/arch/m68k/dts/M54418TWR_serial_mii.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5441x.dtsi"
-
-/ {
-	model = "Freescale M54418TWR_serial_mii";
-	compatible = "fsl,M54418TWR_serial_mii";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
-
-&fec0 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-	mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M54418TWR_serial_rmii.dts b/arch/m68k/dts/M54418TWR_serial_rmii.dts
deleted file mode 100644
index e4639fe..0000000
--- a/arch/m68k/dts/M54418TWR_serial_rmii.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5441x.dtsi"
-
-/ {
-	model = "Freescale M54418TWR_serial_rmii";
-	compatible = "fsl,M54418TWR_serial_rmii";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
-
-&fec0 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-	mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M54451EVB.dts b/arch/m68k/dts/M54451EVB.dts
deleted file mode 100644
index b81d37a..0000000
--- a/arch/m68k/dts/M54451EVB.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5445x.dtsi"
-
-/ {
-	model = "Freescale M54451EVB";
-	compatible = "fsl,M54451EVB";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
-
-&fec0 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-};
diff --git a/arch/m68k/dts/M54451EVB_stmicro.dts b/arch/m68k/dts/M54451EVB_stmicro.dts
deleted file mode 100644
index 6645b58..0000000
--- a/arch/m68k/dts/M54451EVB_stmicro.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5445x.dtsi"
-
-/ {
-	model = "Freescale M54451EVB_stmicro";
-	compatible = "fsl,M54451EVB";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
-
-&fec0 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-};
diff --git a/arch/m68k/dts/M54455EVB.dts b/arch/m68k/dts/M54455EVB.dts
deleted file mode 100644
index b0ffb51..0000000
--- a/arch/m68k/dts/M54455EVB.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5445x.dtsi"
-
-/ {
-	model = "Freescale M54455EVB";
-	compatible = "fsl,M54455EVB";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
-
-&fec0 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-	mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M54455EVB_a66.dts b/arch/m68k/dts/M54455EVB_a66.dts
deleted file mode 100644
index c2557bd..0000000
--- a/arch/m68k/dts/M54455EVB_a66.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5445x.dtsi"
-
-/ {
-	model = "Freescale M54455EVB_a66";
-	compatible = "fsl,M54455EVB_a66";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
-
-&fec0 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-	mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M54455EVB_i66.dts b/arch/m68k/dts/M54455EVB_i66.dts
deleted file mode 100644
index 3c9161b..0000000
--- a/arch/m68k/dts/M54455EVB_i66.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5445x.dtsi"
-
-/ {
-	model = "Freescale M54455EVB_i66";
-	compatible = "fsl,M54455EVB_i66";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
-
-&fec0 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-	mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M54455EVB_intel.dts b/arch/m68k/dts/M54455EVB_intel.dts
deleted file mode 100644
index 54209d2..0000000
--- a/arch/m68k/dts/M54455EVB_intel.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5445x.dtsi"
-
-/ {
-	model = "Freescale M54455EVB_intel";
-	compatible = "fsl,M5275EVB_intel";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
-
-&fec0 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-	mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M54455EVB_stm33.dts b/arch/m68k/dts/M54455EVB_stm33.dts
deleted file mode 100644
index 701b9a7..0000000
--- a/arch/m68k/dts/M54455EVB_stm33.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5445x.dtsi"
-
-/ {
-	model = "Freescale M54455EVB_stm33";
-	compatible = "fsl,M5275EVB_stm33";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
-
-&fec0 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-	mii-base = <0>;
-};
diff --git a/arch/m68k/dts/Makefile b/arch/m68k/dts/Makefile
index 47260a1..fdd435b 100644
--- a/arch/m68k/dts/Makefile
+++ b/arch/m68k/dts/Makefile
@@ -1,7 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-dtb-$(CONFIG_TARGET_M52277EVB) += M52277EVB.dtb \
-	M52277EVB_stmicro.dtb
 dtb-$(CONFIG_TARGET_M5235EVB) += M5235EVB.dtb \
 	M5235EVB_Flash32.dtb
 dtb-$(CONFIG_TARGET_COBRA5272) += cobra5272.dtb
@@ -17,19 +15,6 @@ dtb-$(CONFIG_TARGET_ASTRO_MCF5373L) += astro_mcf5373l.dtb
 dtb-$(CONFIG_TARGET_M53017EVB) += M53017EVB.dtb
 dtb-$(CONFIG_TARGET_M5329EVB) += M5329AFEE.dtb M5329BFEE.dtb
 dtb-$(CONFIG_TARGET_M5373EVB) += M5373EVB.dtb
-dtb-$(CONFIG_TARGET_M54418TWR) += M54418TWR.dtb \
-	M54418TWR_nand_mii.dtb \
-	M54418TWR_nand_rmii.dtb \
-	M54418TWR_serial_mii.dtb \
-	M54418TWR_serial_rmii.dtb \
-	M54418TWR_nand_rmii_lowfreq.dtb
-dtb-$(CONFIG_TARGET_M54451EVB) += M54451EVB.dtb \
-	M54451EVB_stmicro.dtb
-dtb-$(CONFIG_TARGET_M54455EVB) += M54455EVB.dtb \
-	M54455EVB_intel.dtb \
-	M54455EVB_stm33.dtb \
-	M54455EVB_a66.dtb \
-	M54455EVB_i66.dtb
 dtb-$(CONFIG_TARGET_AMCORE) += amcore.dtb
 dtb-$(CONFIG_TARGET_STMARK2) += stmark2.dtb
 
diff --git a/arch/m68k/dts/mcf5227x.dtsi b/arch/m68k/dts/mcf5227x.dtsi
deleted file mode 100644
index 8c95edd..0000000
--- a/arch/m68k/dts/mcf5227x.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/ {
-	compatible = "fsl,mcf5227x";
-
-	aliases {
-		serial0 = &uart0;
-		spi0 = &dspi0;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uart0: uart@fc060000 {
-			compatible = "fsl,mcf-uart";
-			reg = <0xfc060000 0x40>;
-			status = "disabled";
-		};
-
-		uart1: uart@fc064000 {
-			compatible = "fsl,mcf-uart";
-			reg = <0xfc064000 0x40>;
-			status = "disabled";
-		};
-
-		uart2: uart@fc068000 {
-			compatible = "fsl,mcf-uart";
-			reg = <0xfc068000 0x40>;
-			status = "disabled";
-		};
-
-		dspi0: dspi@fc05c000 {
-			compatible = "fsl,mcf-dspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xfc05c000 0x100>;
-			spi-max-frequency = <50000000>;
-			num-cs = <4>;
-			spi-mode = <0>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/m68k/dts/mcf5445x.dtsi b/arch/m68k/dts/mcf5445x.dtsi
deleted file mode 100644
index b7ecc99..0000000
--- a/arch/m68k/dts/mcf5445x.dtsi
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/ {
-	compatible = "fsl,mcf5445x";
-
-	aliases {
-		serial0 = &uart0;
-		spi0 = &dspi0;
-		fec0 = &fec0;
-		fec1 = &fec1;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uart0: uart@fc060000 {
-			compatible = "fsl,mcf-uart";
-			reg = <0xfc060000 0x40>;
-			status = "disabled";
-		};
-
-		uart1: uart@fc064000 {
-			compatible = "fsl,mcf-uart";
-			reg = <0xfc064000 0x40>;
-			status = "disabled";
-		};
-
-		uart2: uart@fc068000 {
-			compatible = "fsl,mcf-uart";
-			reg = <0xfc068000 0x40>;
-			status = "disabled";
-		};
-
-		dspi0: dspi@fc05c000 {
-			compatible = "fsl,mcf-dspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xfc05c000 0x100>;
-			spi-max-frequency = <50000000>;
-			num-cs = <4>;
-			spi-mode = <0>;
-			status = "disabled";
-		};
-
-		fec0: ethernet@fc030000 {
-			compatible = "fsl,mcf-fec";
-			reg = <0xfc030000 0x4000>;
-			mii-base = <0>;
-			max-speed = <100>;
-			timeout-loop = <50000>;
-			status = "disabled";
-		};
-
-		fec1: ethernet@fc034000 {
-			compatible = "fsl,mcf-fec";
-			reg = <0xfc034000 0x4000>;
-			mii-base = <1>;
-			max-speed = <100>;
-			timeout-loop = <50000>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h
index fabec0a..ceb462f 100644
--- a/arch/m68k/include/asm/cache.h
+++ b/arch/m68k/include/asm/cache.h
@@ -10,7 +10,7 @@
 #define __CACHE_H
 
 #if defined(CONFIG_MCF520x) || defined(CONFIG_MCF523x) || \
-    defined(CONFIG_MCF52x2) || defined(CONFIG_MCF5227x)
+    defined(CONFIG_MCF52x2)
 #define CONFIG_CF_V2
 #endif
 
@@ -19,9 +19,7 @@
 #define CONFIG_CF_V3
 #endif
 
-#if defined(CONFIG_MCF5445x)
-#define CONFIG_CF_V4
-#elif defined(CONFIG_MCF5441x)
+#if defined(CONFIG_MCF5441x)
 #define CONFIG_CF_V4E		/* Four Extra ACRn */
 #endif
 
diff --git a/arch/m68k/include/asm/immap.h b/arch/m68k/include/asm/immap.h
index cabdb0f..02aa95a 100644
--- a/arch/m68k/include/asm/immap.h
+++ b/arch/m68k/include/asm/immap.h
@@ -32,34 +32,6 @@
 #define CONFIG_SYS_NUM_IRQS		(128)
 #endif				/* CONFIG_M520x */
 
-#ifdef CONFIG_M52277
-#include <asm/immap_5227x.h>
-#include <asm/m5227x.h>
-
-#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000))
-
-#define CONFIG_SYS_MCFRTC_BASE		(MMAP_RTC)
-
-#ifdef CONFIG_LCD
-#define	CONFIG_SYS_LCD_BASE		(MMAP_LCD)
-#endif
-
-/* Timer */
-#ifdef CONFIG_MCFTMR
-#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
-#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR1)
-#define CONFIG_SYS_TMRPND_REG		(((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
-#define CONFIG_SYS_TMRINTR_NO		(INT0_HI_DTMR1)
-#define CONFIG_SYS_TMRINTR_MASK	(INTC_IPRH_INT33)
-#define CONFIG_SYS_TMRINTR_PEND	(CONFIG_SYS_TMRINTR_MASK)
-#define CONFIG_SYS_TMRINTR_PRI		(6)
-#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
-#endif
-
-#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
-#define CONFIG_SYS_NUM_IRQS		(128)
-#endif				/* CONFIG_M52277 */
-
 #ifdef CONFIG_M5235
 #include <asm/immap_5235.h>
 #include <asm/m5235.h>
@@ -330,42 +302,6 @@
 
 #endif				/* CONFIG_M54418 */
 
-#if defined(CONFIG_M54451) || defined(CONFIG_M54455)
-#include <asm/immap_5445x.h>
-#include <asm/m5445x.h>
-
-#define CONFIG_SYS_FEC0_IOBASE		(MMAP_FEC0)
-#if defined(CONFIG_M54455EVB)
-#define CONFIG_SYS_FEC1_IOBASE		(MMAP_FEC1)
-#endif
-
-#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000))
-
-#define CONFIG_SYS_MCFRTC_BASE		(MMAP_RTC)
-
-/* Timer */
-#ifdef CONFIG_MCFTMR
-#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
-#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR1)
-#define CONFIG_SYS_TMRPND_REG		(((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
-#define CONFIG_SYS_TMRINTR_NO		(INT0_HI_DTMR1)
-#define CONFIG_SYS_TMRINTR_MASK	(INTC_IPRH_INT33)
-#define CONFIG_SYS_TMRINTR_PEND	(CONFIG_SYS_TMRINTR_MASK)
-#define CONFIG_SYS_TMRINTR_PRI		(6)
-#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
-#endif
-
-#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
-#define CONFIG_SYS_NUM_IRQS		(128)
-
-#ifdef CONFIG_PCI
-#define CONFIG_SYS_PCI_BAR0		(CONFIG_SYS_MBAR)
-#define CONFIG_SYS_PCI_BAR5		(CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_PCI_TBATR0		(CONFIG_SYS_MBAR)
-#define CONFIG_SYS_PCI_TBATR5		(CONFIG_SYS_SDRAM_BASE)
-#endif
-#endif				/* CONFIG_M54451 || CONFIG_M54455 */
-
 #ifdef CONFIG_M547x
 #include <asm/immap_547x_8x.h>
 #include <asm/m547x_8x.h>
diff --git a/arch/m68k/include/asm/immap_5227x.h b/arch/m68k/include/asm/immap_5227x.h
deleted file mode 100644
index 710d6f5..0000000
--- a/arch/m68k/include/asm/immap_5227x.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * MCF5227x Internal Memory Map
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#ifndef __IMMAP_5227X__
-#define __IMMAP_5227X__
-
-/* Module Base Addresses */
-#define MMAP_SCM1	(CONFIG_SYS_MBAR + 0x00000000)
-#define MMAP_XBS	(CONFIG_SYS_MBAR + 0x00004000)
-#define MMAP_FBCS	(CONFIG_SYS_MBAR + 0x00008000)
-#define MMAP_CAN	(CONFIG_SYS_MBAR + 0x00020000)
-#define MMAP_RTC	(CONFIG_SYS_MBAR + 0x0003C000)
-#define MMAP_SCM2	(CONFIG_SYS_MBAR + 0x00040010)
-#define MMAP_SCM3	(CONFIG_SYS_MBAR + 0x00040070)
-#define MMAP_EDMA	(CONFIG_SYS_MBAR + 0x00044000)
-#define MMAP_INTC0	(CONFIG_SYS_MBAR + 0x00048000)
-#define MMAP_INTC1	(CONFIG_SYS_MBAR + 0x0004C000)
-#define MMAP_IACK	(CONFIG_SYS_MBAR + 0x00054000)
-#define MMAP_I2C	(CONFIG_SYS_MBAR + 0x00058000)
-#define MMAP_DSPI	(CONFIG_SYS_MBAR + 0x0005C000)
-#define MMAP_UART0	(CONFIG_SYS_MBAR + 0x00060000)
-#define MMAP_UART1	(CONFIG_SYS_MBAR + 0x00064000)
-#define MMAP_UART2	(CONFIG_SYS_MBAR + 0x00068000)
-#define MMAP_DTMR0	(CONFIG_SYS_MBAR + 0x00070000)
-#define MMAP_DTMR1	(CONFIG_SYS_MBAR + 0x00074000)
-#define MMAP_DTMR2	(CONFIG_SYS_MBAR + 0x00078000)
-#define MMAP_DTMR3	(CONFIG_SYS_MBAR + 0x0007C000)
-#define MMAP_PIT0	(CONFIG_SYS_MBAR + 0x00080000)
-#define MMAP_PIT1	(CONFIG_SYS_MBAR + 0x00084000)
-#define MMAP_PWM	(CONFIG_SYS_MBAR + 0x00090000)
-#define MMAP_EPORT	(CONFIG_SYS_MBAR + 0x00094000)
-#define MMAP_RCM	(CONFIG_SYS_MBAR + 0x000A0000)
-#define MMAP_CCM	(CONFIG_SYS_MBAR + 0x000A0004)
-#define MMAP_GPIO	(CONFIG_SYS_MBAR + 0x000A4000)
-#define MMAP_ADC	(CONFIG_SYS_MBAR + 0x000A8000)
-#define MMAP_LCD	(CONFIG_SYS_MBAR + 0x000AC000)
-#define MMAP_LCD_BGLUT	(CONFIG_SYS_MBAR + 0x000AC800)
-#define MMAP_LCD_GWLUT	(CONFIG_SYS_MBAR + 0x000ACC00)
-#define MMAP_USBHW	(CONFIG_SYS_MBAR + 0x000B0000)
-#define MMAP_USBCAPS	(CONFIG_SYS_MBAR + 0x000B0100)
-#define MMAP_USBEHCI	(CONFIG_SYS_MBAR + 0x000B0140)
-#define MMAP_USBOTG	(CONFIG_SYS_MBAR + 0x000B01A0)
-#define MMAP_SDRAM	(CONFIG_SYS_MBAR + 0x000B8000)
-#define MMAP_SSI	(CONFIG_SYS_MBAR + 0x000BC000)
-#define MMAP_PLL	(CONFIG_SYS_MBAR + 0x000C0000)
-
-#include <asm/coldfire/crossbar.h>
-#include <asm/coldfire/dspi.h>
-#include <asm/coldfire/edma.h>
-#include <asm/coldfire/eport.h>
-#include <asm/coldfire/flexbus.h>
-#include <asm/coldfire/flexcan.h>
-#include <asm/coldfire/intctrl.h>
-#include <asm/coldfire/lcd.h>
-#include <asm/coldfire/pwm.h>
-#include <asm/coldfire/ssi.h>
-
-/* Reset Controller Module (RCM) */
-typedef struct rcm {
-	u8 rcr;
-	u8 rsr;
-} rcm_t;
-
-/* Chip Configuration Module (CCM) */
-typedef struct ccm {
-	u16 ccr;		/* Chip Configuration (Rd-only) */
-	u16 resv1;
-	u16 rcon;		/* Reset Configuration (Rd-only) */
-	u16 cir;		/* Chip Identification (Rd-only) */
-	u32 resv2;
-	u16 misccr;		/* Miscellaneous Control */
-	u16 cdr;		/* Clock Divider */
-	u16 uocsr;		/* USB On-the-Go Controller Status */
-	u16 resv4;
-	u16 sbfsr;		/* Serial Boot Status */
-	u16 sbfcr;		/* Serial Boot Control */
-} ccm_t;
-
-typedef struct canex_ctrl {
-	can_msg_t msg[16];	/* 0x00 Message Buffer 0-15 */
-	u32 res0[0x700];	/* 0x100 */
-	can_msg_t rxim[16];	/* 0x800 Rx Individual Mask 0-15 */
-} canex_t;
-
-/* General Purpose I/O Module (GPIO) */
-typedef struct gpio {
-	/* Port Output Data Registers */
-	u8 podr_be;		/* 0x00 */
-	u8 podr_cs;		/* 0x01 */
-	u8 podr_fbctl;		/* 0x02 */
-	u8 podr_i2c;		/* 0x03 */
-	u8 rsvd1;		/* 0x04 */
-	u8 podr_uart;		/* 0x05 */
-	u8 podr_dspi;		/* 0x06 */
-	u8 podr_timer;		/* 0x07 */
-	u8 podr_lcdctl;		/* 0x08 */
-	u8 podr_lcddatah;	/* 0x09 */
-	u8 podr_lcddatam;	/* 0x0A */
-	u8 podr_lcddatal;	/* 0x0B */
-
-	/* Port Data Direction Registers */
-	u8 pddr_be;		/* 0x0C */
-	u8 pddr_cs;		/* 0x0D */
-	u8 pddr_fbctl;		/* 0x0E */
-	u8 pddr_i2c;		/* 0x0F */
-	u8 rsvd2;		/* 0x10 */
-	u8 pddr_uart;		/* 0x11 */
-	u8 pddr_dspi;		/* 0x12 */
-	u8 pddr_timer;		/* 0x13 */
-	u8 pddr_lcdctl;		/* 0x14 */
-	u8 pddr_lcddatah;	/* 0x15 */
-	u8 pddr_lcddatam;	/* 0x16 */
-	u8 pddr_lcddatal;	/* 0x17 */
-
-	/* Port Pin Data/Set Data Registers */
-	u8 ppdsdr_be;		/* 0x18 */
-	u8 ppdsdr_cs;		/* 0x19 */
-	u8 ppdsdr_fbctl;	/* 0x1A */
-	u8 ppdsdr_i2c;		/* 0x1B */
-	u8 rsvd3;		/* 0x1C */
-	u8 ppdsdr_uart;		/* 0x1D */
-	u8 ppdsdr_dspi;		/* 0x1E */
-	u8 ppdsdr_timer;	/* 0x1F */
-	u8 ppdsdr_lcdctl;	/* 0x20 */
-	u8 ppdsdr_lcddatah;	/* 0x21 */
-	u8 ppdsdr_lcddatam;	/* 0x22 */
-	u8 ppdsdr_lcddatal;	/* 0x23 */
-
-	/* Port Clear Output Data Registers */
-	u8 pclrr_be;		/* 0x24 */
-	u8 pclrr_cs;		/* 0x25 */
-	u8 pclrr_fbctl;		/* 0x26 */
-	u8 pclrr_i2c;		/* 0x27 */
-	u8 rsvd4;		/* 0x28 */
-	u8 pclrr_uart;		/* 0x29 */
-	u8 pclrr_dspi;		/* 0x2A */
-	u8 pclrr_timer;		/* 0x2B */
-	u8 pclrr_lcdctl;	/* 0x2C */
-	u8 pclrr_lcddatah;	/* 0x2D */
-	u8 pclrr_lcddatam;	/* 0x2E */
-	u8 pclrr_lcddatal;	/* 0x2F */
-
-	/* Pin Assignment Registers */
-	u8 par_be;		/* 0x30 */
-	u8 par_cs;		/* 0x31 */
-	u8 par_fbctl;		/* 0x32 */
-	u8 par_i2c;		/* 0x33 */
-	u16 par_uart;		/* 0x34 */
-	u8 par_dspi;		/* 0x36 */
-	u8 par_timer;		/* 0x37 */
-	u8 par_lcdctl;		/* 0x38 */
-	u8 par_irq;		/* 0x39 */
-	u16 rsvd6;		/* 0x3A - 0x3B */
-	u32 par_lcdh;		/* 0x3C */
-	u32 par_lcdl;		/* 0x40 */
-
-	/* Mode select control registers */
-	u8 mscr_fb;		/* 0x44 */
-	u8 mscr_sdram;		/* 0x45 */
-
-	u16 rsvd7;		/* 0x46 - 0x47 */
-	u8 dscr_dspi;		/* 0x48 */
-	u8 dscr_timer;		/* 0x49 */
-	u8 dscr_i2c;		/* 0x4A */
-	u8 dscr_lcd;		/* 0x4B */
-	u8 dscr_debug;		/* 0x4C */
-	u8 dscr_clkrst;		/* 0x4D */
-	u8 dscr_irq;		/* 0x4E */
-	u8 dscr_uart;		/* 0x4F */
-} gpio_t;
-
-/* SDRAM Controller (SDRAMC) */
-typedef struct sdramc {
-	u32 sdmr;		/* Mode/Extended Mode */
-	u32 sdcr;		/* Control */
-	u32 sdcfg1;		/* Configuration 1 */
-	u32 sdcfg2;		/* Chip Select */
-	u8 resv0[0x100];
-	u32 sdcs0;		/* Mode/Extended Mode */
-	u32 sdcs1;		/* Mode/Extended Mode */
-} sdramc_t;
-
-/* Phase Locked Loop (PLL) */
-typedef struct pll {
-	u32 pcr;		/* PLL Control */
-	u32 psr;		/* PLL Status */
-} pll_t;
-
-/* System Control Module register  */
-typedef struct scm1 {
-	u32 mpr;		/* 0x00 Master Privilege */
-	u32 rsvd1[7];
-	u32 pacra;		/* 0x20 */
-	u32 pacrb;		/* 0x24 */
-	u32 pacrc;		/* 0x28 */
-	u32 pacrd;		/* 0x2C */
-	u32 rsvd2[4];
-	u32 pacre;		/* 0x40 */
-	u32 pacrf;		/* 0x44 */
-	u32 pacrg;		/* 0x48 */
-	u32 rsvd3;
-	u32 pacri;		/* 0x50 */
-} scm1_t;
-
-typedef struct scm2_ctrl {
-	u8 res1[3];		/* 0x00 - 0x02 */
-	u8 wcr;			/* 0x03 wakeup control */
-	u16 res2;		/* 0x04 - 0x05 */
-	u16 cwcr;		/* 0x06 Core Watchdog Control */
-	u8 res3[3];		/* 0x08 - 0x0A */
-	u8 cwsr;		/* 0x0B Core Watchdog Service */
-	u8 res4[2];		/* 0x0C - 0x0D */
-	u8 scmisr;		/* 0x0F Interrupt Status */
-	u32 res5;		/* 0x20 */
-	u32 bcr;		/* 0x24 Burst Configuration */
-} scm2_t;
-
-typedef struct scm3_ctrl {
-	u32 cfadr;		/* 0x00 Core Fault Address */
-	u8 res7;		/* 0x04 */
-	u8 cfier;		/* 0x05 Core Fault Interrupt Enable */
-	u8 cfloc;		/* 0x06 Core Fault Location */
-	u8 cfatr;		/* 0x07 Core Fault Attributes */
-	u32 cfdtr;		/* 0x08 Core Fault Data */
-} scm3_t;
-
-typedef struct rtcex {
-	u32 rsvd1[3];
-	u32 gocu;
-	u32 gocl;
-} rtcex_t;
-#endif				/* __IMMAP_5227X__ */
diff --git a/arch/m68k/include/asm/immap_5445x.h b/arch/m68k/include/asm/immap_5445x.h
deleted file mode 100644
index 3111d00..0000000
--- a/arch/m68k/include/asm/immap_5445x.h
+++ /dev/null
@@ -1,335 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * MCF5445x Internal Memory Map
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#ifndef __IMMAP_5445X__
-#define __IMMAP_5445X__
-
-/* Module Base Addresses */
-#define MMAP_SCM1	0xFC000000
-#define MMAP_XBS	0xFC004000
-#define MMAP_FBCS	0xFC008000
-#define MMAP_FEC0	0xFC030000
-#define MMAP_FEC1	0xFC034000
-#define MMAP_RTC	0xFC03C000
-#define MMAP_SCM2	0xFC040000
-#define MMAP_EDMA	0xFC044000
-#define MMAP_INTC0	0xFC048000
-#define MMAP_INTC1	0xFC04C000
-#define MMAP_IACK	0xFC054000
-#define MMAP_I2C	0xFC058000
-#define MMAP_DSPI	0xFC05C000
-#define MMAP_UART0	0xFC060000
-#define MMAP_UART1	0xFC064000
-#define MMAP_UART2	0xFC068000
-#define MMAP_DTMR0	0xFC070000
-#define MMAP_DTMR1	0xFC074000
-#define MMAP_DTMR2	0xFC078000
-#define MMAP_DTMR3	0xFC07C000
-#define MMAP_PIT0	0xFC080000
-#define MMAP_PIT1	0xFC084000
-#define MMAP_PIT2	0xFC088000
-#define MMAP_PIT3	0xFC08C000
-#define MMAP_EPORT	0xFC094000
-#define MMAP_WTM	0xFC098000
-#define MMAP_SBF	0xFC0A0000
-#define MMAP_RCM	0xFC0A0000
-#define MMAP_CCM	0xFC0A0000
-#define MMAP_GPIO	0xFC0A4000
-#define MMAP_PCI	0xFC0A8000
-#define MMAP_PCIARB	0xFC0AC000
-#define MMAP_RNG	0xFC0B4000
-#define MMAP_SDRAM	0xFC0B8000
-#define MMAP_SSI	0xFC0BC000
-#define MMAP_PLL	0xFC0C4000
-#define MMAP_ATA	0x90000000
-#define MMAP_USBHW	0xFC0B0000
-#define MMAP_USBCAPS	0xFC0B0100
-#define MMAP_USBEHCI	0xFC0B0140
-#define MMAP_USBOTG	0xFC0B01A0
-
-#include <asm/coldfire/ata.h>
-#include <asm/coldfire/crossbar.h>
-#include <asm/coldfire/dspi.h>
-#include <asm/coldfire/edma.h>
-#include <asm/coldfire/eport.h>
-#include <asm/coldfire/flexbus.h>
-#include <asm/coldfire/intctrl.h>
-#include <asm/coldfire/ssi.h>
-
-/* Watchdog Timer Modules (WTM) */
-typedef struct wtm {
-	u16 wcr;
-	u16 wmr;
-	u16 wcntr;
-	u16 wsr;
-} wtm_t;
-
-/* Serial Boot Facility (SBF) */
-typedef struct sbf {
-	u8 resv0[0x18];
-	u16 sbfsr;		/* Serial Boot Facility Status Register */
-	u8 resv1[0x6];
-	u16 sbfcr;		/* Serial Boot Facility Control Register */
-} sbf_t;
-
-/* Reset Controller Module (RCM) */
-typedef struct rcm {
-	u8 rcr;
-	u8 rsr;
-} rcm_t;
-
-/* Chip Configuration Module (CCM) */
-typedef struct ccm {
-	u8 ccm_resv0[0x4];
-	u16 ccr;		/* Chip Configuration Register (256 TEPBGA, Read-only) */
-	u8 resv1[0x2];
-	u16 rcon;		/* Reset Configuration (256 TEPBGA, Read-only) */
-	u16 cir;		/* Chip Identification Register (Read-only) */
-	u8 resv2[0x4];
-	u16 misccr;		/* Miscellaneous Control Register */
-	u16 cdr;		/* Clock Divider Register */
-	u16 uocsr;		/* USB On-the-Go Controller Status Register */
-} ccm_t;
-
-/* General Purpose I/O Module (GPIO) */
-typedef struct gpio {
-	u8 podr_fec0h;		/* FEC0 High Port Output Data Register */
-	u8 podr_fec0l;		/* FEC0 Low Port Output Data Register */
-	u8 podr_ssi;		/* SSI Port Output Data Register */
-	u8 podr_fbctl;		/* Flexbus Control Port Output Data Register */
-	u8 podr_be;		/* Flexbus Byte Enable Port Output Data Register */
-	u8 podr_cs;		/* Flexbus Chip-Select Port Output Data Register */
-	u8 podr_dma;		/* DMA Port Output Data Register */
-	u8 podr_feci2c;		/* FEC1 / I2C Port Output Data Register */
-	u8 resv0[0x1];
-	u8 podr_uart;		/* UART Port Output Data Register */
-	u8 podr_dspi;		/* DSPI Port Output Data Register */
-	u8 podr_timer;		/* Timer Port Output Data Register */
-	u8 podr_pci;		/* PCI Port Output Data Register */
-	u8 podr_usb;		/* USB Port Output Data Register */
-	u8 podr_atah;		/* ATA High Port Output Data Register */
-	u8 podr_atal;		/* ATA Low Port Output Data Register */
-	u8 podr_fec1h;		/* FEC1 High Port Output Data Register */
-	u8 podr_fec1l;		/* FEC1 Low Port Output Data Register */
-	u8 resv1[0x2];
-	u8 podr_fbadh;		/* Flexbus AD High Port Output Data Register */
-	u8 podr_fbadmh;		/* Flexbus AD Med-High Port Output Data Register */
-	u8 podr_fbadml;		/* Flexbus AD Med-Low Port Output Data Register */
-	u8 podr_fbadl;		/* Flexbus AD Low Port Output Data Register */
-	u8 pddr_fec0h;		/* FEC0 High Port Data Direction Register */
-	u8 pddr_fec0l;		/* FEC0 Low Port Data Direction Register */
-	u8 pddr_ssi;		/* SSI Port Data Direction Register */
-	u8 pddr_fbctl;		/* Flexbus Control Port Data Direction Register */
-	u8 pddr_be;		/* Flexbus Byte Enable Port Data Direction Register */
-	u8 pddr_cs;		/* Flexbus Chip-Select Port Data Direction Register */
-	u8 pddr_dma;		/* DMA Port Data Direction Register */
-	u8 pddr_feci2c;		/* FEC1 / I2C Port Data Direction Register */
-	u8 resv2[0x1];
-	u8 pddr_uart;		/* UART Port Data Direction Register */
-	u8 pddr_dspi;		/* DSPI Port Data Direction Register */
-	u8 pddr_timer;		/* Timer Port Data Direction Register */
-	u8 pddr_pci;		/* PCI Port Data Direction Register */
-	u8 pddr_usb;		/* USB Port Data Direction Register */
-	u8 pddr_atah;		/* ATA High Port Data Direction Register */
-	u8 pddr_atal;		/* ATA Low Port Data Direction Register */
-	u8 pddr_fec1h;		/* FEC1 High Port Data Direction Register */
-	u8 pddr_fec1l;		/* FEC1 Low Port Data Direction Register */
-	u8 resv3[0x2];
-	u8 pddr_fbadh;		/* Flexbus AD High Port Data Direction Register */
-	u8 pddr_fbadmh;		/* Flexbus AD Med-High Port Data Direction Register */
-	u8 pddr_fbadml;		/* Flexbus AD Med-Low Port Data Direction Register */
-	u8 pddr_fbadl;		/* Flexbus AD Low Port Data Direction Register */
-	u8 ppdsdr_fec0h;	/* FEC0 High Port Pin Data/Set Data Register */
-	u8 ppdsdr_fec0l;	/* FEC0 Low Port Clear Output Data Register */
-	u8 ppdsdr_ssi;		/* SSI Port Pin Data/Set Data Register */
-	u8 ppdsdr_fbctl;	/* Flexbus Control Port Pin Data/Set Data Register */
-	u8 ppdsdr_be;		/* Flexbus Byte Enable Port Pin Data/Set Data Register */
-	u8 ppdsdr_cs;		/* Flexbus Chip-Select Port Pin Data/Set Data Register */
-	u8 ppdsdr_dma;		/* DMA Port Pin Data/Set Data Register */
-	u8 ppdsdr_feci2c;	/* FEC1 / I2C Port Pin Data/Set Data Register */
-	u8 resv4[0x1];
-	u8 ppdsdr_uart;		/* UART Port Pin Data/Set Data Register */
-	u8 ppdsdr_dspi;		/* DSPI Port Pin Data/Set Data Register */
-	u8 ppdsdr_timer;	/* FTimer Port Pin Data/Set Data Register */
-	u8 ppdsdr_pci;		/* PCI Port Pin Data/Set Data Register */
-	u8 ppdsdr_usb;		/* USB Port Pin Data/Set Data Register */
-	u8 ppdsdr_atah;		/* ATA High Port Pin Data/Set Data Register */
-	u8 ppdsdr_atal;		/* ATA Low Port Pin Data/Set Data Register */
-	u8 ppdsdr_fec1h;	/* FEC1 High Port Pin Data/Set Data Register */
-	u8 ppdsdr_fec1l;	/* FEC1 Low Port Pin Data/Set Data Register */
-	u8 resv5[0x2];
-	u8 ppdsdr_fbadh;	/* Flexbus AD High Port Pin Data/Set Data Register */
-	u8 ppdsdr_fbadmh;	/* Flexbus AD Med-High Port Pin Data/Set Data Register */
-	u8 ppdsdr_fbadml;	/* Flexbus AD Med-Low Port Pin Data/Set Data Register */
-	u8 ppdsdr_fbadl;	/* Flexbus AD Low Port Pin Data/Set Data Register */
-	u8 pclrr_fec0h;		/* FEC0 High Port Clear Output Data Register */
-	u8 pclrr_fec0l;		/* FEC0 Low Port Pin Data/Set Data Register */
-	u8 pclrr_ssi;		/* SSI Port Clear Output Data Register */
-	u8 pclrr_fbctl;		/* Flexbus Control Port Clear Output Data Register */
-	u8 pclrr_be;		/* Flexbus Byte Enable Port Clear Output Data Register */
-	u8 pclrr_cs;		/* Flexbus Chip-Select Port Clear Output Data Register */
-	u8 pclrr_dma;		/* DMA Port Clear Output Data Register */
-	u8 pclrr_feci2c;	/* FEC1 / I2C Port Clear Output Data Register */
-	u8 resv6[0x1];
-	u8 pclrr_uart;		/* UART Port Clear Output Data Register */
-	u8 pclrr_dspi;		/* DSPI Port Clear Output Data Register */
-	u8 pclrr_timer;		/* Timer Port Clear Output Data Register */
-	u8 pclrr_pci;		/* PCI Port Clear Output Data Register */
-	u8 pclrr_usb;		/* USB Port Clear Output Data Register */
-	u8 pclrr_atah;		/* ATA High Port Clear Output Data Register */
-	u8 pclrr_atal;		/* ATA Low Port Clear Output Data Register */
-	u8 pclrr_fec1h;		/* FEC1 High Port Clear Output Data Register */
-	u8 pclrr_fec1l;		/* FEC1 Low Port Clear Output Data Register */
-	u8 resv7[0x2];
-	u8 pclrr_fbadh;		/* Flexbus AD High Port Clear Output Data Register */
-	u8 pclrr_fbadmh;	/* Flexbus AD Med-High Port Clear Output Data Register */
-	u8 pclrr_fbadml;	/* Flexbus AD Med-Low Port Clear Output Data Register */
-	u8 pclrr_fbadl;		/* Flexbus AD Low Port Clear Output Data Register */
-	u8 par_fec;		/* FEC Pin Assignment Register */
-	u8 par_dma;		/* DMA Pin Assignment Register */
-	u8 par_fbctl;		/* Flexbus Control Pin Assignment Register */
-	u8 par_dspi;		/* DSPI Pin Assignment Register */
-	u8 par_be;		/* Flexbus Byte-Enable Pin Assignment Register */
-	u8 par_cs;		/* Flexbus Chip-Select Pin Assignment Register */
-	u8 par_timer;		/* Time Pin Assignment Register */
-	u8 par_usb;		/* USB Pin Assignment Register */
-	u8 resv8[0x1];
-	u8 par_uart;		/* UART Pin Assignment Register */
-	u16 par_feci2c;		/* FEC / I2C Pin Assignment Register */
-	u16 par_ssi;		/* SSI Pin Assignment Register */
-	u16 par_ata;		/* ATA Pin Assignment Register */
-	u8 par_irq;		/* IRQ Pin Assignment Register */
-	u8 resv9[0x1];
-	u16 par_pci;		/* PCI Pin Assignment Register */
-	u8 mscr_sdram;		/* SDRAM Mode Select Control Register */
-	u8 mscr_pci;		/* PCI Mode Select Control Register */
-	u8 resv10[0x2];
-	u8 dscr_i2c;		/* I2C Drive Strength Control Register */
-	u8 dscr_flexbus;	/* FLEXBUS Drive Strength Control Register */
-	u8 dscr_fec;		/* FEC Drive Strength Control Register */
-	u8 dscr_uart;		/* UART Drive Strength Control Register */
-	u8 dscr_dspi;		/* DSPI Drive Strength Control Register */
-	u8 dscr_timer;		/* TIMER Drive Strength Control Register */
-	u8 dscr_ssi;		/* SSI Drive Strength Control Register */
-	u8 dscr_dma;		/* DMA Drive Strength Control Register */
-	u8 dscr_debug;		/* DEBUG Drive Strength Control Register */
-	u8 dscr_reset;		/* RESET Drive Strength Control Register */
-	u8 dscr_irq;		/* IRQ Drive Strength Control Register */
-	u8 dscr_usb;		/* USB Drive Strength Control Register */
-	u8 dscr_ata;		/* ATA Drive Strength Control Register */
-} gpio_t;
-
-/* SDRAM Controller (SDRAMC) */
-typedef struct sdramc {
-	u32 sdmr;		/* SDRAM Mode/Extended Mode Register */
-	u32 sdcr;		/* SDRAM Control Register */
-	u32 sdcfg1;		/* SDRAM Configuration Register 1 */
-	u32 sdcfg2;		/* SDRAM Chip Select Register */
-	u8 resv0[0x100];
-	u32 sdcs0;		/* SDRAM Mode/Extended Mode Register */
-	u32 sdcs1;		/* SDRAM Mode/Extended Mode Register */
-} sdramc_t;
-
-/* Phase Locked Loop (PLL) */
-typedef struct pll {
-	u32 pcr;		/* PLL Control Register */
-	u32 psr;		/* PLL Status Register */
-} pll_t;
-
-typedef struct pci {
-	u32 idr;		/* 0x00 Device Id / Vendor Id Register */
-	u32 scr;		/* 0x04 Status / command Register */
-	u32 ccrir;		/* 0x08 Class Code / Revision Id Register */
-	u32 cr1;		/* 0x0c Configuration 1 Register */
-	u32 bar0;		/* 0x10 Base address register 0 Register */
-	u32 bar1;		/* 0x14 Base address register 1 Register */
-	u32 bar2;		/* 0x18 Base address register 2 Register */
-	u32 bar3;		/* 0x1c Base address register 3 Register */
-	u32 bar4;		/* 0x20 Base address register 4 Register */
-	u32 bar5;		/* 0x24 Base address register 5 Register */
-	u32 ccpr;		/* 0x28 Cardbus CIS Pointer Register */
-	u32 sid;		/* 0x2c Subsystem ID / Subsystem Vendor ID Register */
-	u32 erbar;		/* 0x30 Expansion ROM Base Address Register */
-	u32 cpr;		/* 0x34 Capabilities Pointer Register */
-	u32 rsvd1;		/* 0x38 */
-	u32 cr2;		/* 0x3c Configuration Register 2 */
-	u32 rsvd2[8];		/* 0x40 - 0x5f */
-
-	/* General control / status registers */
-	u32 gscr;		/* 0x60 Global Status / Control Register */
-	u32 tbatr0a;		/* 0x64 Target Base Address Translation Register  0 */
-	u32 tbatr1a;		/* 0x68 Target Base Address Translation Register  1 */
-	u32 tcr1;		/* 0x6c Target Control 1 Register */
-	u32 iw0btar;		/* 0x70 Initiator Window 0 Base/Translation addr */
-	u32 iw1btar;		/* 0x74 Initiator Window 1 Base/Translation addr */
-	u32 iw2btar;		/* 0x78 Initiator Window 2 Base/Translation addr */
-	u32 rsvd3;		/* 0x7c */
-	u32 iwcr;		/* 0x80 Initiator Window Configuration Register */
-	u32 icr;		/* 0x84 Initiator Control Register */
-	u32 isr;		/* 0x88 Initiator Status Register */
-	u32 tcr2;		/* 0x8c Target Control 2 Register */
-	u32 tbatr0;		/* 0x90 Target Base Address Translation Register  0 */
-	u32 tbatr1;		/* 0x94 Target Base Address Translation Register  1 */
-	u32 tbatr2;		/* 0x98 Target Base Address Translation Register  2 */
-	u32 tbatr3;		/* 0x9c Target Base Address Translation Register  3 */
-	u32 tbatr4;		/* 0xa0 Target Base Address Translation Register  4 */
-	u32 tbatr5;		/* 0xa4 Target Base Address Translation Register  5 */
-	u32 intr;		/* 0xa8 Interrupt Register */
-	u32 rsvd4[19];		/* 0xac - 0xf7 */
-	u32 car;		/* 0xf8 Configuration Address Register */
-} pci_t;
-
-typedef struct pci_arbiter {
-	/* Pci Arbiter Registers */
-	union {
-		u32 acr;	/* Arbiter Control Register */
-		u32 asr;	/* Arbiter Status Register */
-	};
-} pciarb_t;
-
-/* Register read/write struct */
-typedef struct scm1 {
-	u32 mpr;		/* 0x00 Master Privilege Register */
-	u32 rsvd1[7];
-	u32 pacra;		/* 0x20 Peripheral Access Control Register A */
-	u32 pacrb;		/* 0x24 Peripheral Access Control Register B */
-	u32 pacrc;		/* 0x28 Peripheral Access Control Register C */
-	u32 pacrd;		/* 0x2C Peripheral Access Control Register D */
-	u32 rsvd2[4];
-	u32 pacre;		/* 0x40 Peripheral Access Control Register E */
-	u32 pacrf;		/* 0x44 Peripheral Access Control Register F */
-	u32 pacrg;		/* 0x48 Peripheral Access Control Register G */
-} scm1_t;
-
-typedef struct scm2 {
-	u8 rsvd1[19];		/* 0x00 - 0x12 */
-	u8 wcr;			/* 0x13 */
-	u16 rsvd2;		/* 0x14 - 0x15 */
-	u16 cwcr;		/* 0x16 */
-	u8 rsvd3[3];		/* 0x18 - 0x1A */
-	u8 cwsr;		/* 0x1B */
-	u8 rsvd4[3];		/* 0x1C - 0x1E */
-	u8 scmisr;		/* 0x1F */
-	u32 rsvd5;		/* 0x20 - 0x23 */
-	u8 bcr;			/* 0x24 */
-	u8 rsvd6[74];		/* 0x25 - 0x6F */
-	u32 cfadr;		/* 0x70 */
-	u8 rsvd7;		/* 0x74 */
-	u8 cfier;		/* 0x75 */
-	u8 cfloc;		/* 0x76 */
-	u8 cfatr;		/* 0x77 */
-	u32 rsvd8;		/* 0x78 - 0x7B */
-	u32 cfdtr;		/* 0x7C */
-} scm2_t;
-
-typedef struct rtcex {
-	u32 rsvd1[3];
-	u32 gocu;
-	u32 gocl;
-} rtcex_t;
-#endif				/* __IMMAP_5445X__ */
diff --git a/arch/m68k/include/asm/m5227x.h b/arch/m68k/include/asm/m5227x.h
deleted file mode 100644
index 67c16e0..0000000
--- a/arch/m68k/include/asm/m5227x.h
+++ /dev/null
@@ -1,546 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * MCF5227x Internal Memory Map
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#ifndef __MCF5227X__
-#define __MCF5227X__
-
-/* Interrupt Controller (INTC) */
-#define INT0_LO_RSVD0			(0)
-#define INT0_LO_EPORT1			(1)
-#define INT0_LO_EPORT4			(4)
-#define INT0_LO_EPORT7			(7)
-#define INT0_LO_EDMA_00			(8)
-#define INT0_LO_EDMA_01			(9)
-#define INT0_LO_EDMA_02			(10)
-#define INT0_LO_EDMA_03			(11)
-#define INT0_LO_EDMA_04			(12)
-#define INT0_LO_EDMA_05			(13)
-#define INT0_LO_EDMA_06			(14)
-#define INT0_LO_EDMA_07			(15)
-#define INT0_LO_EDMA_08			(16)
-#define INT0_LO_EDMA_09			(17)
-#define INT0_LO_EDMA_10			(18)
-#define INT0_LO_EDMA_11			(19)
-#define INT0_LO_EDMA_12			(20)
-#define INT0_LO_EDMA_13			(21)
-#define INT0_LO_EDMA_14			(22)
-#define INT0_LO_EDMA_15			(23)
-#define INT0_LO_EDMA_ERR		(24)
-#define INT0_LO_SCM_CWIC		(25)
-#define INT0_LO_UART0			(26)
-#define INT0_LO_UART1			(27)
-#define INT0_LO_UART2			(28)
-#define INT0_LO_I2C			(30)
-#define INT0_LO_DSPI			(31)
-#define INT0_HI_DTMR0			(32)
-#define INT0_HI_DTMR1			(33)
-#define INT0_HI_DTMR2			(34)
-#define INT0_HI_DTMR3			(35)
-#define INT0_HI_SCMIR			(62)
-#define INT0_HI_RTC_ISR			(63)
-
-#define INT1_HI_CAN_BOFFINT		(1)
-#define INT1_HI_CAN_ERRINT		(3)
-#define INT1_HI_CAN_BUF0I		(4)
-#define INT1_HI_CAN_BUF1I		(5)
-#define INT1_HI_CAN_BUF2I		(6)
-#define INT1_HI_CAN_BUF3I		(7)
-#define INT1_HI_CAN_BUF4I		(8)
-#define INT1_HI_CAN_BUF5I		(9)
-#define INT1_HI_CAN_BUF6I		(10)
-#define INT1_HI_CAN_BUF7I		(11)
-#define INT1_HI_CAN_BUF8I		(12)
-#define INT1_HI_CAN_BUF9I		(13)
-#define INT1_HI_CAN_BUF10I		(14)
-#define INT1_HI_CAN_BUF11I		(15)
-#define INT1_HI_CAN_BUF12I		(16)
-#define INT1_HI_CAN_BUF13I		(17)
-#define INT1_HI_CAN_BUF14I		(18)
-#define INT1_HI_CAN_BUF15I		(19)
-#define INT1_HI_PIT0_PIF		(43)
-#define INT1_HI_PIT1_PIF		(44)
-#define INT1_HI_USBOTG_STS		(47)
-#define INT1_HI_SSI_ISR			(49)
-#define INT1_HI_PWM_INT			(50)
-#define INT1_HI_LCDC_ISR		(51)
-#define INT1_HI_CCM_UOCSR		(53)
-#define INT1_HI_DSPI_EOQF		(54)
-#define INT1_HI_DSPI_TFFF		(55)
-#define INT1_HI_DSPI_TCF		(56)
-#define INT1_HI_DSPI_TFUF		(57)
-#define INT1_HI_DSPI_RFDF		(58)
-#define INT1_HI_DSPI_RFOF		(59)
-#define INT1_HI_DSPI_RFOF_TFUF		(60)
-#define INT1_HI_TOUCH_ADC		(61)
-#define INT1_HI_PLL_LOCKS		(62)
-
-/*********************************************************************
-* Reset Controller Module (RCM)
-*********************************************************************/
-
-/* Bit definitions and macros for RCR */
-#define RCM_RCR_FRCRSTOUT		(0x40)
-#define RCM_RCR_SOFTRST			(0x80)
-
-/* Bit definitions and macros for RSR */
-#define RCM_RSR_LOL			(0x01)
-#define RCM_RSR_WDR_CORE		(0x02)
-#define RCM_RSR_EXT			(0x04)
-#define RCM_RSR_POR			(0x08)
-#define RCM_RSR_SOFT			(0x20)
-
-/*********************************************************************
-* Chip Configuration Module (CCM)
-*********************************************************************/
-
-/* Bit definitions and macros for CCR */
-#define CCM_CCR_DRAMSEL			(0x0100)
-#define CCM_CCR_CSC_UNMASK		(0xFF3F)
-#define CCM_CCR_CSC_FBCS5_CS4		(0x00C0)
-#define CCM_CCR_CSC_FBCS5_A22		(0x0080)
-#define CCM_CCR_CSC_FB_A23_A22		(0x0040)
-#define CCM_CCR_LIMP			(0x0020)
-#define CCM_CCR_LOAD			(0x0010)
-#define CCM_CCR_BOOTPS_UNMASK		(0xFFF3)
-#define CCM_CCR_BOOTPS_PS16		(0x0008)
-#define CCM_CCR_BOOTPS_PS8		(0x0004)
-#define CCM_CCR_BOOTPS_PS32		(0x0000)
-#define CCM_CCR_OSCMODE_OSCBYPASS	(0x0002)
-
-/* Bit definitions and macros for RCON */
-#define CCM_RCON_CSC_UNMASK		(0xFF3F)
-#define CCM_RCON_CSC_FBCS5_CS4		(0x00C0)
-#define CCM_RCON_CSC_FBCS5_A22		(0x0080)
-#define CCM_RCON_CSC_FB_A23_A22		(0x0040)
-#define CCM_RCON_LIMP			(0x0020)
-#define CCM_RCON_LOAD			(0x0010)
-#define CCM_RCON_BOOTPS_UNMASK		(0xFFF3)
-#define CCM_RCON_BOOTPS_PS16		(0x0008)
-#define CCM_RCON_BOOTPS_PS8		(0x0004)
-#define CCM_RCON_BOOTPS_PS32		(0x0000)
-#define CCM_RCON_OSCMODE_OSCBYPASS	(0x0002)
-
-/* Bit definitions and macros for CIR */
-#define CCM_CIR_PIN(x)			(((x) & 0xFFC0) >> 6)
-#define CCM_CIR_PRN(x)			((x) & 0x003F)
-#define CCM_CIR_PIN_MCF52277		(0x0000)
-
-/* Bit definitions and macros for MISCCR */
-#define CCM_MISCCR_RTCSRC		(0x4000)
-#define CCM_MISCCR_USBPUE		(0x2000)	/* USB transceiver pull-up */
-#define CCM_MISCCR_LIMP			(0x1000)	/* Limp mode enable */
-
-#define CCM_MISCCR_BME			(0x0800)	/* Bus monitor ext en bit */
-#define CCM_MISCCR_BMT_65536		(0)
-#define CCM_MISCCR_BMT_32768		(1)
-#define CCM_MISCCR_BMT_16384		(2)
-#define CCM_MISCCR_BMT_8192		(3)
-#define CCM_MISCCR_BMT_4096		(4)
-#define CCM_MISCCR_BMT_2048		(5)
-#define CCM_MISCCR_BMT_1024		(6)
-#define CCM_MISCCR_BMT_512		(7)
-
-#define CCM_MISCCR_SSIPUE		(0x0080)	/* SSI RXD/TXD pull enable */
-#define CCM_MISCCR_SSIPUS		(0x0040)	/* SSI RXD/TXD pull select */
-#define CCM_MISCCR_TIMDMA		(0x0020)	/* Timer DMA mux selection */
-#define CCM_MISCCR_SSISRC		(0x0010)	/* SSI clock source */
-#define CCM_MISCCR_LCDCHEN		(0x0004)	/* LCD Int CLK en */
-#define CCM_MISCCR_USBOC		(0x0002)	/* USB VBUS over-current sense pol */
-#define CCM_MISCCR_USBSRC		(0x0001)	/* USB clock source */
-
-/* Bit definitions and macros for CDR */
-#define CCM_CDR_USBDIV(x)		(((x)&0x0003)<<12)
-#define CCM_CDR_LPDIV(x)		(((x)&0x000F)<<8)	/* Low power clk div */
-#define CCM_CDR_SSIDIV(x)		(((x)&0x00FF))	/* SSI oversampling clk div */
-
-/* Bit definitions and macros for UOCSR */
-#define CCM_UOCSR_DPPD			(0x2000)	/* D+ 15Kohm pull-down (rd-only) */
-#define CCM_UOCSR_DMPD			(0x1000)	/* D- 15Kohm pull-down (rd-only) */
-#define CCM_UOCSR_CRG_VBUS		(0x0400)	/* VBUS charge resistor enabled (rd-only) */
-#define CCM_UOCSR_DCR_VBUS		(0x0200)	/* VBUS discharge resistor en (rd-only) */
-#define CCM_UOCSR_DPPU			(0x0100)	/* D+ pull-up for FS enabled (rd-only) */
-#define CCM_UOCSR_AVLD			(0x0080)	/* A-peripheral valid indicator */
-#define CCM_UOCSR_BVLD			(0x0040)	/* B-peripheral valid indicator */
-#define CCM_UOCSR_VVLD			(0x0020)	/* VBUS valid indicator */
-#define CCM_UOCSR_SEND			(0x0010)	/* Session end */
-#define CCM_UOCSR_WKUP			(0x0004)	/* USB OTG controller wake-up event */
-#define CCM_UOCSR_UOMIE			(0x0002)	/* USB OTG misc interrupt en */
-#define CCM_UOCSR_XPDE			(0x0001)	/* On-chip transceiver pull-down en */
-
-/*********************************************************************
-* General Purpose I/O Module (GPIO)
-*********************************************************************/
-/* Bit definitions and macros for PAR_BE */
-#define GPIO_PAR_BE_UNMASK		(0x0F)
-#define GPIO_PAR_BE_BE3_BE3		(0x08)
-#define GPIO_PAR_BE_BE3_GPIO		(0x00)
-#define GPIO_PAR_BE_BE2_BE2		(0x04)
-#define GPIO_PAR_BE_BE2_GPIO		(0x00)
-#define GPIO_PAR_BE_BE1_BE1		(0x02)
-#define GPIO_PAR_BE_BE1_GPIO		(0x00)
-#define GPIO_PAR_BE_BE0_BE0		(0x01)
-#define GPIO_PAR_BE_BE0_GPIO		(0x00)
-
-/* Bit definitions and macros for PAR_CS */
-#define GPIO_PAR_CS_CS3			(0x10)
-#define GPIO_PAR_CS_CS2			(0x08)
-#define GPIO_PAR_CS_CS1_FBCS1		(0x06)
-#define GPIO_PAR_CS_CS1_SDCS1		(0x04)
-#define GPIO_PAR_CS_CS1_GPIO		(0x00)
-#define GPIO_PAR_CS_CS0			(0x01)
-
-/* Bit definitions and macros for PAR_FBCTL */
-#define GPIO_PAR_FBCTL_OE		(0x80)
-#define GPIO_PAR_FBCTL_TA		(0x40)
-#define GPIO_PAR_FBCTL_RW		(0x20)
-#define GPIO_PAR_FBCTL_TS_UNMASK	(0xE7)
-#define GPIO_PAR_FBCTL_TS_FBTS		(0x18)
-#define GPIO_PAR_FBCTL_TS_DMAACK	(0x10)
-#define GPIO_PAR_FBCTL_TS_GPIO		(0x00)
-
-/* Bit definitions and macros for PAR_FECI2C */
-#define GPIO_PAR_I2C_SCL_UNMASK		(0xF3)
-#define GPIO_PAR_I2C_SCL_SCL		(0x0C)
-#define GPIO_PAR_I2C_SCL_CANTXD		(0x08)
-#define GPIO_PAR_I2C_SCL_U2TXD		(0x04)
-#define GPIO_PAR_I2C_SCL_GPIO		(0x00)
-
-#define GPIO_PAR_I2C_SDA_UNMASK		(0xFC)
-#define GPIO_PAR_I2C_SDA_SDA		(0x03)
-#define GPIO_PAR_I2C_SDA_CANRXD		(0x02)
-#define GPIO_PAR_I2C_SDA_U2RXD		(0x01)
-#define GPIO_PAR_I2C_SDA_GPIO		(0x00)
-
-/* Bit definitions and macros for PAR_UART */
-#define GPIO_PAR_UART_U1CTS_UNMASK	(0x3FFF)
-#define GPIO_PAR_UART_U1CTS_U1CTS	(0xC000)
-#define GPIO_PAR_UART_U1CTS_SSIBCLK	(0x8000)
-#define GPIO_PAR_UART_U1CTS_LCDCLS	(0x4000)
-#define GPIO_PAR_UART_U1CTS_GPIO	(0x0000)
-
-#define GPIO_PAR_UART_U1RTS_UNMASK	(0xCFFF)
-#define GPIO_PAR_UART_U1RTS_U1RTS	(0x3000)
-#define GPIO_PAR_UART_U1RTS_SSIFS	(0x2000)
-#define GPIO_PAR_UART_U1RTS_LCDPS	(0x1000)
-#define GPIO_PAR_UART_U1RTS_GPIO	(0x0000)
-
-#define GPIO_PAR_UART_U1RXD_UNMASK	(0xF3FF)
-#define GPIO_PAR_UART_U1RXD_U1RXD	(0x0C00)
-#define GPIO_PAR_UART_U1RXD_SSIRXD	(0x0800)
-#define GPIO_PAR_UART_U1RXD_GPIO	(0x0000)
-
-#define GPIO_PAR_UART_U1TXD_UNMASK	(0xFCFF)
-#define GPIO_PAR_UART_U1TXD_U1TXD	(0x0300)
-#define GPIO_PAR_UART_U1TXD_SSITXD	(0x0200)
-#define GPIO_PAR_UART_U1TXD_GPIO	(0x0000)
-
-#define GPIO_PAR_UART_U0CTS_UNMASK	(0xFF3F)
-#define GPIO_PAR_UART_U0CTS_U0CTS	(0x00C0)
-#define GPIO_PAR_UART_U0CTS_T1OUT	(0x0080)
-#define GPIO_PAR_UART_U0CTS_USBVBUSEN	(0x0040)
-#define GPIO_PAR_UART_U0CTS_GPIO	(0x0000)
-
-#define GPIO_PAR_UART_U0RTS_UNMASK	(0xFFCF)
-#define GPIO_PAR_UART_U0RTS_U0RTS	(0x0030)
-#define GPIO_PAR_UART_U0RTS_T1IN	(0x0020)
-#define GPIO_PAR_UART_U0RTS_USBVBUSOC	(0x0010)
-#define GPIO_PAR_UART_U0RTS_GPIO	(0x0000)
-
-#define GPIO_PAR_UART_U0RXD_UNMASK	(0xFFF3)
-#define GPIO_PAR_UART_U0RXD_U0RXD	(0x000C)
-#define GPIO_PAR_UART_U0RXD_CANRX	(0x0008)
-#define GPIO_PAR_UART_U0RXD_GPIO	(0x0000)
-
-#define GPIO_PAR_UART_U0TXD_UNMASK	(0xFFFC)
-#define GPIO_PAR_UART_U0TXD_U0TXD	(0x0003)
-#define GPIO_PAR_UART_U0TXD_CANTX	(0x0002)
-#define GPIO_PAR_UART_U0TXD_GPIO	(0x0000)
-
-/* Bit definitions and macros for PAR_DSPI */
-#define GPIO_PAR_DSPI_PCS0_UNMASK	(0x3F)
-#define GPIO_PAR_DSPI_PCS0_PCS0		(0xC0)
-#define GPIO_PAR_DSPI_PCS0_U2RTS	(0x80)
-#define GPIO_PAR_DSPI_PCS0_GPIO		(0x00)
-#define GPIO_PAR_DSPI_SIN_UNMASK	(0xCF)
-#define GPIO_PAR_DSPI_SIN_SIN		(0x30)
-#define GPIO_PAR_DSPI_SIN_U2RXD		(0x20)
-#define GPIO_PAR_DSPI_SIN_GPIO		(0x00)
-#define GPIO_PAR_DSPI_SOUT_UNMASK	(0xF3)
-#define GPIO_PAR_DSPI_SOUT_SOUT		(0x0C)
-#define GPIO_PAR_DSPI_SOUT_U2TXD	(0x08)
-#define GPIO_PAR_DSPI_SOUT_GPIO		(0x00)
-#define GPIO_PAR_DSPI_SCK_UNMASK	(0xFC)
-#define GPIO_PAR_DSPI_SCK_SCK		(0x03)
-#define GPIO_PAR_DSPI_SCK_U2CTS		(0x02)
-#define GPIO_PAR_DSPI_SCK_GPIO		(0x00)
-
-/* Bit definitions and macros for PAR_TIMER */
-#define GPIO_PAR_TIMER_T3IN_UNMASK	(0x3F)
-#define GPIO_PAR_TIMER_T3IN_T3IN	(0xC0)
-#define GPIO_PAR_TIMER_T3IN_T3OUT	(0x80)
-#define GPIO_PAR_TIMER_T3IN_SSIMCLK	(0x40)
-#define GPIO_PAR_TIMER_T3IN_GPIO	(0x00)
-#define GPIO_PAR_TIMER_T2IN_UNMASK	(0xCF)
-#define GPIO_PAR_TIMER_T2IN_T2IN	(0x30)
-#define GPIO_PAR_TIMER_T2IN_T2OUT	(0x20)
-#define GPIO_PAR_TIMER_T2IN_DSPIPCS2	(0x10)
-#define GPIO_PAR_TIMER_T2IN_GPIO	(0x00)
-#define GPIO_PAR_TIMER_T1IN_UNMASK	(0xF3)
-#define GPIO_PAR_TIMER_T1IN_T1IN	(0x0C)
-#define GPIO_PAR_TIMER_T1IN_T1OUT	(0x08)
-#define GPIO_PAR_TIMER_T1IN_LCDCONTRAST	(0x04)
-#define GPIO_PAR_TIMER_T1IN_GPIO	(0x00)
-#define GPIO_PAR_TIMER_T0IN_UNMASK	(0xFC)
-#define GPIO_PAR_TIMER_T0IN_T0IN	(0x03)
-#define GPIO_PAR_TIMER_T0IN_T0OUT	(0x02)
-#define GPIO_PAR_TIMER_T0IN_LCDREV	(0x01)
-#define GPIO_PAR_TIMER_T0IN_GPIO	(0x00)
-
-/* Bit definitions and macros for GPIO_PAR_LCDCTL */
-#define GPIO_PAR_LCDCTL_ACDOE_UNMASK	(0xE7)
-#define GPIO_PAR_LCDCTL_ACDOE_ACDOE	(0x18)
-#define GPIO_PAR_LCDCTL_ACDOE_SPLSPR	(0x10)
-#define GPIO_PAR_LCDCTL_ACDOE_GPIO	(0x00)
-#define GPIO_PAR_LCDCTL_FLM_VSYNC	(0x04)
-#define GPIO_PAR_LCDCTL_LP_HSYNC	(0x02)
-#define GPIO_PAR_LCDCTL_LSCLK		(0x01)
-
-/* Bit definitions and macros for PAR_IRQ */
-#define GPIO_PAR_IRQ_IRQ4_UNMASK	(0xF3)
-#define GPIO_PAR_IRQ_IRQ4_SSIINPCLK	(0x0C)
-#define GPIO_PAR_IRQ_IRQ4_DMAREQ0	(0x08)
-#define GPIO_PAR_IRQ_IRQ4_GPIO		(0x00)
-#define GPIO_PAR_IRQ_IRQ1_UNMASK	(0xFC)
-#define GPIO_PAR_IRQ_IRQ1_PCIINT	(0x03)
-#define GPIO_PAR_IRQ_IRQ1_USBCLKIN	(0x02)
-#define GPIO_PAR_IRQ_IRQ1_SSICLKIN	(0x01)
-#define GPIO_PAR_IRQ_IRQ1_GPIO		(0x00)
-
-/* Bit definitions and macros for GPIO_PAR_LCDH */
-#define GPIO_PAR_LCDH_LD17_UNMASK	(0xFFFFF3FF)
-#define GPIO_PAR_LCDH_LD17_LD17		(0x00000C00)
-#define GPIO_PAR_LCDH_LD17_LD11		(0x00000800)
-#define GPIO_PAR_LCDH_LD17_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDH_LD16_UNMASK	(0xFFFFFCFF)
-#define GPIO_PAR_LCDH_LD16_LD16		(0x00000300)
-#define GPIO_PAR_LCDH_LD16_LD10		(0x00000200)
-#define GPIO_PAR_LCDH_LD16_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDH_LD15_UNMASK	(0xFFFFFF3F)
-#define GPIO_PAR_LCDH_LD15_LD15		(0x000000C0)
-#define GPIO_PAR_LCDH_LD15_LD9		(0x00000080)
-#define GPIO_PAR_LCDH_LD15_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDH_LD14_UNMASK	(0xFFFFFFCF)
-#define GPIO_PAR_LCDH_LD14_LD14		(0x00000030)
-#define GPIO_PAR_LCDH_LD14_LD8		(0x00000020)
-#define GPIO_PAR_LCDH_LD14_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDH_LD13_UNMASK	(0xFFFFFFF3)
-#define GPIO_PAR_LCDH_LD13_LD13		(0x0000000C)
-#define GPIO_PAR_LCDH_LD13_CANTX	(0x00000008)
-#define GPIO_PAR_LCDH_LD13_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDH_LD12_UNMASK	(0xFFFFFFFC)
-#define GPIO_PAR_LCDH_LD12_LD12		(0x00000003)
-#define GPIO_PAR_LCDH_LD12_CANRX	(0x00000002)
-#define GPIO_PAR_LCDH_LD12_GPIO		(0x00000000)
-
-/* Bit definitions and macros for GPIO_PAR_LCDL */
-#define GPIO_PAR_LCDL_LD11_UNMASK	(0x3FFFFFFF)
-#define GPIO_PAR_LCDL_LD11_LD11		(0xC0000000)
-#define GPIO_PAR_LCDL_LD11_LD7		(0x80000000)
-#define GPIO_PAR_LCDL_LD11_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD10_UNMASK	(0xCFFFFFFF)
-#define GPIO_PAR_LCDL_LD10_LD10		(0x30000000)
-#define GPIO_PAR_LCDL_LD10_LD6		(0x20000000)
-#define GPIO_PAR_LCDL_LD10_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD9_UNMASK	(0xF3FFFFFF)
-#define GPIO_PAR_LCDL_LD9_LD9		(0x0C000000)
-#define GPIO_PAR_LCDL_LD9_LD5		(0x08000000)
-#define GPIO_PAR_LCDL_LD9_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD8_UNMASK	(0xFCFFFFFF)
-#define GPIO_PAR_LCDL_LD8_LD8		(0x03000000)
-#define GPIO_PAR_LCDL_LD8_LD4		(0x02000000)
-#define GPIO_PAR_LCDL_LD8_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD7_UNMASK	(0xFF3FFFFF)
-#define GPIO_PAR_LCDL_LD7_LD7		(0x00C00000)
-#define GPIO_PAR_LCDL_LD7_PWM7		(0x00800000)
-#define GPIO_PAR_LCDL_LD7_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD6_UNMASK	(0xFFCFFFFF)
-#define GPIO_PAR_LCDL_LD6_LD6		(0x00300000)
-#define GPIO_PAR_LCDL_LD6_PWM5		(0x00200000)
-#define GPIO_PAR_LCDL_LD6_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD5_UNMASK	(0xFFF3FFFF)
-#define GPIO_PAR_LCDL_LD5_LD5		(0x000C0000)
-#define GPIO_PAR_LCDL_LD5_LD3		(0x00080000)
-#define GPIO_PAR_LCDL_LD5_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD4_UNMASK	(0xFFFCFFFF)
-#define GPIO_PAR_LCDL_LD4_LD4		(0x00030000)
-#define GPIO_PAR_LCDL_LD4_LD2		(0x00020000)
-#define GPIO_PAR_LCDL_LD4_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD3_UNMASK	(0xFFFF3FFF)
-#define GPIO_PAR_LCDL_LD3_LD3		(0x0000C000)
-#define GPIO_PAR_LCDL_LD3_LD1		(0x00008000)
-#define GPIO_PAR_LCDL_LD3_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD2_UNMASK	(0xFFFFCFFF)
-#define GPIO_PAR_LCDL_LD2_LD2		(0x00003000)
-#define GPIO_PAR_LCDL_LD2_LD0		(0x00002000)
-#define GPIO_PAR_LCDL_LD2_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD1_UNMASK	(0xFFFFF3FF)
-#define GPIO_PAR_LCDL_LD1_LD1		(0x00000C00)
-#define GPIO_PAR_LCDL_LD1_PWM3		(0x00000800)
-#define GPIO_PAR_LCDL_LD1_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD0_UNMASK	(0xFFFFFCFF)
-#define GPIO_PAR_LCDL_LD0_LD0		(0x00000300)
-#define GPIO_PAR_LCDL_LD0_PWM1		(0x00000200)
-#define GPIO_PAR_LCDL_LD0_GPIO		(0x00000000)
-
-/* Bit definitions and macros for MSCR_FB */
-#define GPIO_MSCR_FB_DUPPER_UNMASK	(0xCF)
-#define GPIO_MSCR_FB_DUPPER_25V_33V	(0x30)
-#define GPIO_MSCR_FB_DUPPER_FULL_18V	(0x20)
-#define GPIO_MSCR_FB_DUPPER_OD		(0x10)
-#define GPIO_MSCR_FB_DUPPER_HALF_18V	(0x00)
-
-#define GPIO_MSCR_FB_DLOWER_UNMASK	(0xF3)
-#define GPIO_MSCR_FB_DLOWER_25V_33V	(0x0C)
-#define GPIO_MSCR_FB_DLOWER_FULL_18V	(0x08)
-#define GPIO_MSCR_FB_DLOWER_OD		(0x04)
-#define GPIO_MSCR_FB_DLOWER_HALF_18V	(0x00)
-
-#define GPIO_MSCR_FB_ADDRCTL_UNMASK	(0xFC)
-#define GPIO_MSCR_FB_ADDRCTL_25V_33V	(0x03)
-#define GPIO_MSCR_FB_ADDRCTL_FULL_18V	(0x02)
-#define GPIO_MSCR_FB_ADDRCTL_OD		(0x01)
-#define GPIO_MSCR_FB_ADDRCTL_HALF_18V	(0x00)
-
-/* Bit definitions and macros for MSCR_SDRAM */
-#define GPIO_MSCR_SDRAM_SDCLKB_UNMASK	(0xCF)
-#define GPIO_MSCR_SDRAM_SDCLKB_25V_33V	(0x30)
-#define GPIO_MSCR_SDRAM_SDCLKB_FULL_18V	(0x20)
-#define GPIO_MSCR_SDRAM_SDCLKB_OD	(0x10)
-#define GPIO_MSCR_SDRAM_SDCLKB_HALF_18V	(0x00)
-
-#define GPIO_MSCR_SDRAM_SDCLK_UNMASK	(0xF3)
-#define GPIO_MSCR_SDRAM_SDCLK_25V_33V	(0x0C)
-#define GPIO_MSCR_SDRAM_SDCLK_FULL_18V	(0x08)
-#define GPIO_MSCR_SDRAM_SDCLK_OPD	(0x04)
-#define GPIO_MSCR_SDRAM_SDCLK_HALF_18V	(0x00)
-
-#define GPIO_MSCR_SDRAM_SDCTL_UNMASK	(0xFC)
-#define GPIO_MSCR_SDRAM_SDCTL_25V_33V	(0x03)
-#define GPIO_MSCR_SDRAM_SDCTL_FULL_18V	(0x02)
-#define GPIO_MSCR_SDRAM_SDCTL_OPD	(0x01)
-#define GPIO_MSCR_SDRAM_SDCTL_HALF_18V	(0x00)
-
-/* Bit definitions and macros for Drive Strength Control */
-#define DSCR_LOAD_50PF	(0x03)
-#define DSCR_LOAD_30PF	(0x02)
-#define DSCR_LOAD_20PF	(0x01)
-#define DSCR_LOAD_10PF	(0x00)
-
-/*********************************************************************
-* SDRAM Controller (SDRAMC)
-*********************************************************************/
-
-/* Bit definitions and macros for SDMR */
-#define SDRAMC_SDMR_DDR2_AD(x)		(((x)&0x00003FFF))	/* Address for DDR2 */
-#define SDRAMC_SDMR_CMD			(0x00010000)	/* Command */
-#define SDRAMC_SDMR_AD(x)		(((x)&0x00000FFF)<<18)	/* Address */
-#define SDRAMC_SDMR_BK(x)		(((x)&0x00000003)<<30)	/* Bank Address */
-#define SDRAMC_SDMR_BK_LMR		(0x00000000)
-#define SDRAMC_SDMR_BK_LEMR		(0x40000000)
-
-/* Bit definitions and macros for SDCR */
-#define SDRAMC_SDCR_DPD			(0x00000001)	/* Deep Power-Down Mode */
-#define SDRAMC_SDCR_IPALL		(0x00000002)	/* Initiate Precharge All */
-#define SDRAMC_SDCR_IREF		(0x00000004)	/* Initiate Refresh */
-#define SDRAMC_SDCR_DQS_OE(x)		(((x)&0x00000003)<<10)	/* DQS Output Enable */
-#define SDRAMC_SDCR_MEM_PS		(0x00002000)	/* Data Port Size */
-#define SDRAMC_SDCR_REF_CNT(x)		(((x)&0x0000003F)<<16)	/* Periodic Refresh Counter */
-#define SDRAMC_SDCR_OE_RULE		(0x00400000)	/* Drive Rule Selection */
-#define SDRAMC_SDCR_ADDR_MUX(x)		(((x)&0x00000003)<<24)	/* Internal Address Mux Select */
-#define SDRAMC_SDCR_DDR2_MODE		(0x08000000)	/* DDR2 Mode Select */
-#define SDRAMC_SDCR_REF_EN		(0x10000000)	/* Refresh Enable */
-#define SDRAMC_SDCR_DDR_MODE		(0x20000000)	/* DDR Mode Select */
-#define SDRAMC_SDCR_CKE			(0x40000000)	/* Clock Enable */
-#define SDRAMC_SDCR_MODE_EN		(0x80000000)	/* SDRAM Mode Register Programming Enable */
-#define SDRAMC_SDCR_DQS_OE_BOTH		(0x00000C000)
-
-/* Bit definitions and macros for SDCFG1 */
-#define SDRAMC_SDCFG1_WT_LAT(x)		(((x)&0x00000007)<<4)	/* Write Latency */
-#define SDRAMC_SDCFG1_REF2ACT(x)	(((x)&0x0000000F)<<8)	/* Refresh to active delay */
-#define SDRAMC_SDCFG1_PRE2ACT(x)	(((x)&0x00000007)<<12)	/* Precharge to active delay */
-#define SDRAMC_SDCFG1_ACT2RW(x)		(((x)&0x00000007)<<16)	/* Active to read/write delay */
-#define SDRAMC_SDCFG1_RD_LAT(x)		(((x)&0x0000000F)<<20)	/* Read CAS Latency */
-#define SDRAMC_SDCFG1_SWT2RWP(x)	(((x)&0x00000007)<<24)	/* Single write to read/write/precharge delay */
-#define SDRAMC_SDCFG1_SRD2RWP(x)	(((x)&0x0000000F)<<28)	/* Single read to read/write/precharge delay */
-
-/* Bit definitions and macros for SDCFG2 */
-#define SDRAMC_SDCFG2_BL(x)		(((x)&0x0000000F)<<16)	/* Burst Length */
-#define SDRAMC_SDCFG2_BRD2W(x)		(((x)&0x0000000F)<<20)	/* Burst read to write delay */
-#define SDRAMC_SDCFG2_BWT2RWP(x)	(((x)&0x0000000F)<<24)	/* Burst write to read/write/precharge delay */
-#define SDRAMC_SDCFG2_BRD2RP(x)		(((x)&0x0000000F)<<28)	/* Burst read to read/precharge delay */
-
-/* Bit definitions and macros for SDCS group */
-#define SDRAMC_SDCS_CSSZ(x)		(((x)&0x0000001F))	/* Chip-Select Size */
-#define SDRAMC_SDCS_CSBA(x)		(((x)&0x00000FFF)<<20)	/* Chip-Select Base Address */
-#define SDRAMC_SDCS_BA(x)		((x)&0xFFF00000)
-#define SDRAMC_SDCS_CSSZ_DISABLE	(0x00000000)
-#define SDRAMC_SDCS_CSSZ_1MBYTE		(0x00000013)
-#define SDRAMC_SDCS_CSSZ_2MBYTE		(0x00000014)
-#define SDRAMC_SDCS_CSSZ_4MBYTE		(0x00000015)
-#define SDRAMC_SDCS_CSSZ_8MBYTE		(0x00000016)
-#define SDRAMC_SDCS_CSSZ_16MBYTE	(0x00000017)
-#define SDRAMC_SDCS_CSSZ_32MBYTE	(0x00000018)
-#define SDRAMC_SDCS_CSSZ_64MBYTE	(0x00000019)
-#define SDRAMC_SDCS_CSSZ_128MBYTE	(0x0000001A)
-#define SDRAMC_SDCS_CSSZ_256MBYTE	(0x0000001B)
-#define SDRAMC_SDCS_CSSZ_512MBYTE	(0x0000001C)
-#define SDRAMC_SDCS_CSSZ_1GBYTE		(0x0000001D)
-#define SDRAMC_SDCS_CSSZ_2GBYTE		(0x0000001E)
-#define SDRAMC_SDCS_CSSZ_4GBYTE		(0x0000001F)
-
-/*********************************************************************
-* Phase Locked Loop (PLL)
-*********************************************************************/
-
-/* Bit definitions and macros for PCR */
-#define PLL_PCR_OUTDIV1(x)		(((x)&0x0000000F))	/* Output divider for CPU clock frequency */
-#define PLL_PCR_OUTDIV2(x)		(((x)&0x0000000F)<<4)	/* Output divider for bus/flexbus clock frequency */
-#define PLL_PCR_OUTDIV3(x)		(((x)&0x0000000F)<<8)	/* Output divider for SDRAM clock frequency */
-#define PLL_PCR_OUTDIV5(x)		(((x)&0x0000000F)<<16)	/* Output divider for USB clock frequency */
-#define PLL_PCR_PFDR(x)			(((x)&0x000000FF)<<24)	/* Feedback divider for VCO frequency */
-#define PLL_PCR_PFDR_MASK		(0x000F0000)
-#define PLL_PCR_OUTDIV5_MASK		(0x000F0000)
-#define PLL_PCR_OUTDIV3_MASK		(0x00000F00)
-#define PLL_PCR_OUTDIV2_MASK		(0x000000F0)
-#define PLL_PCR_OUTDIV1_MASK		(0x0000000F)
-
-/* Bit definitions and macros for PSR */
-#define PLL_PSR_LOCKS			(0x00000001)	/* PLL lost lock - sticky */
-#define PLL_PSR_LOCK			(0x00000002)	/* PLL lock status */
-#define PLL_PSR_LOLIRQ			(0x00000004)	/* PLL loss-of-lock interrupt enable */
-#define PLL_PSR_LOLRE			(0x00000008)	/* PLL loss-of-lock reset enable */
-
-/********************************************************************/
-
-#endif				/* __MCF5227X__ */
diff --git a/arch/m68k/include/asm/m5445x.h b/arch/m68k/include/asm/m5445x.h
deleted file mode 100644
index 498c225..0000000
--- a/arch/m68k/include/asm/m5445x.h
+++ /dev/null
@@ -1,888 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * MCF5445x Internal Memory Map
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#ifndef __MCF5445X__
-#define __MCF5445X__
-
-/*********************************************************************
-* Interrupt Controller (INTC)
-*********************************************************************/
-#define INT0_LO_RSVD0			(0)
-#define INT0_LO_EPORT1			(1)
-#define INT0_LO_EPORT2			(2)
-#define INT0_LO_EPORT3			(3)
-#define INT0_LO_EPORT4			(4)
-#define INT0_LO_EPORT5			(5)
-#define INT0_LO_EPORT6			(6)
-#define INT0_LO_EPORT7			(7)
-#define INT0_LO_EDMA_00			(8)
-#define INT0_LO_EDMA_01			(9)
-#define INT0_LO_EDMA_02			(10)
-#define INT0_LO_EDMA_03			(11)
-#define INT0_LO_EDMA_04			(12)
-#define INT0_LO_EDMA_05			(13)
-#define INT0_LO_EDMA_06			(14)
-#define INT0_LO_EDMA_07			(15)
-#define INT0_LO_EDMA_08			(16)
-#define INT0_LO_EDMA_09			(17)
-#define INT0_LO_EDMA_10			(18)
-#define INT0_LO_EDMA_11			(19)
-#define INT0_LO_EDMA_12			(20)
-#define INT0_LO_EDMA_13			(21)
-#define INT0_LO_EDMA_14			(22)
-#define INT0_LO_EDMA_15			(23)
-#define INT0_LO_EDMA_ERR		(24)
-#define INT0_LO_SCM			(25)
-#define INT0_LO_UART0			(26)
-#define INT0_LO_UART1			(27)
-#define INT0_LO_UART2			(28)
-#define INT0_LO_RSVD1			(29)
-#define INT0_LO_I2C			(30)
-#define INT0_LO_QSPI			(31)
-#define INT0_HI_DTMR0			(32)
-#define INT0_HI_DTMR1			(33)
-#define INT0_HI_DTMR2			(34)
-#define INT0_HI_DTMR3			(35)
-#define INT0_HI_FEC0_TXF		(36)
-#define INT0_HI_FEC0_TXB		(37)
-#define INT0_HI_FEC0_UN			(38)
-#define INT0_HI_FEC0_RL			(39)
-#define INT0_HI_FEC0_RXF		(40)
-#define INT0_HI_FEC0_RXB		(41)
-#define INT0_HI_FEC0_MII		(42)
-#define INT0_HI_FEC0_LC			(43)
-#define INT0_HI_FEC0_HBERR		(44)
-#define INT0_HI_FEC0_GRA		(45)
-#define INT0_HI_FEC0_EBERR		(46)
-#define INT0_HI_FEC0_BABT		(47)
-#define INT0_HI_FEC0_BABR		(48)
-#define INT0_HI_FEC1_TXF		(49)
-#define INT0_HI_FEC1_TXB		(50)
-#define INT0_HI_FEC1_UN			(51)
-#define INT0_HI_FEC1_RL			(52)
-#define INT0_HI_FEC1_RXF		(53)
-#define INT0_HI_FEC1_RXB		(54)
-#define INT0_HI_FEC1_MII		(55)
-#define INT0_HI_FEC1_LC			(56)
-#define INT0_HI_FEC1_HBERR		(57)
-#define INT0_HI_FEC1_GRA		(58)
-#define INT0_HI_FEC1_EBERR		(59)
-#define INT0_HI_FEC1_BABT		(60)
-#define INT0_HI_FEC1_BABR		(61)
-#define INT0_HI_SCMIR			(62)
-#define INT0_HI_RTC_ISR			(63)
-
-#define INT1_HI_DSPI_EOQF		(33)
-#define INT1_HI_DSPI_TFFF		(34)
-#define INT1_HI_DSPI_TCF		(35)
-#define INT1_HI_DSPI_TFUF		(36)
-#define INT1_HI_DSPI_RFDF		(37)
-#define INT1_HI_DSPI_RFOF		(38)
-#define INT1_HI_DSPI_RFOF_TFUF		(39)
-#define INT1_HI_RNG_EI			(40)
-#define INT1_HI_PIT0_PIF		(43)
-#define INT1_HI_PIT1_PIF		(44)
-#define INT1_HI_PIT2_PIF		(45)
-#define INT1_HI_PIT3_PIF		(46)
-#define INT1_HI_USBOTG_USBSTS		(47)
-#define INT1_HI_SSI_ISR			(49)
-#define INT1_HI_CCM_UOCSR		(53)
-#define INT1_HI_ATA_ISR			(54)
-#define INT1_HI_PCI_SCR			(55)
-#define INT1_HI_PCI_ASR			(56)
-#define INT1_HI_PLL_LOCKS		(57)
-
-/*********************************************************************
-* Watchdog Timer Modules (WTM)
-*********************************************************************/
-
-/* Bit definitions and macros for WCR */
-#define WTM_WCR_EN			(0x0001)
-#define WTM_WCR_HALTED			(0x0002)
-#define WTM_WCR_DOZE			(0x0004)
-#define WTM_WCR_WAIT			(0x0008)
-
-/*********************************************************************
-* Serial Boot Facility (SBF)
-*********************************************************************/
-
-/* Bit definitions and macros for SBFCR */
-#define SBF_SBFCR_BLDIV(x)		(((x)&0x000F))	/* Boot loader clock divider */
-#define SBF_SBFCR_FR			(0x0010)	/* Fast read */
-
-/*********************************************************************
-* Reset Controller Module (RCM)
-*********************************************************************/
-
-/* Bit definitions and macros for RCR */
-#define RCM_RCR_FRCRSTOUT		(0x40)
-#define RCM_RCR_SOFTRST			(0x80)
-
-/* Bit definitions and macros for RSR */
-#define RCM_RSR_LOL			(0x01)
-#define RCM_RSR_WDR_CORE		(0x02)
-#define RCM_RSR_EXT			(0x04)
-#define RCM_RSR_POR			(0x08)
-#define RCM_RSR_SOFT			(0x20)
-
-/*********************************************************************
-* Chip Configuration Module (CCM)
-*********************************************************************/
-
-/* Bit definitions and macros for CCR_360 */
-#define CCM_CCR_360_PLLMULT2(x)		(((x)&0x0003))	/* 2-Bit PLL clock mode */
-#define CCM_CCR_360_PCISLEW		(0x0004)	/* PCI pad slew rate mode */
-#define CCM_CCR_360_PCIMODE		(0x0008)	/* PCI host/agent mode */
-#define CCM_CCR_360_PLLMODE		(0x0010)	/* PLL Mode */
-#define CCM_CCR_360_FBCONFIG(x)		(((x)&0x0007)<<5)	/* Flexbus/PCI port size configuration */
-#define CCM_CCR_360_PLLMULT3(x)		(((x)&0x0007))	/* 3-Bit PLL Clock Mode */
-#define CCM_CCR_360_OSCMODE		(0x0008)	/* Oscillator Clock Mode */
-#define CCM_CCR_360_FBCONFIG_MASK	(0x00E0)
-#define CCM_CCR_360_PLLMULT2_MASK	(0x0003)
-#define CCM_CCR_360_PLLMULT3_MASK	(0x0007)
-#define CCM_CCR_360_FBCONFIG_NM_NP_32	(0x0000)
-#define CCM_CCR_360_FBCONFIG_NM_NP_8	(0x0020)
-#define CCM_CCR_360_FBCONFIG_NM_NP_16	(0x0040)
-#define CCM_CCR_360_FBCONFIG_M_P_16	(0x0060)
-#define CCM_CCR_360_FBCONFIG_M_NP_32	(0x0080)
-#define CCM_CCR_360_FBCONFIG_M_NP_8	(0x00A0)
-#define CCM_CCR_360_FBCONFIG_M_NP_16	(0x00C0)
-#define CCM_CCR_360_FBCONFIG_M_P_8	(0x00E0)
-#define CCM_CCR_360_PLLMULT2_12X	(0x0000)
-#define CCM_CCR_360_PLLMULT2_6X		(0x0001)
-#define CCM_CCR_360_PLLMULT2_16X	(0x0002)
-#define CCM_CCR_360_PLLMULT2_8X		(0x0003)
-#define CCM_CCR_360_PLLMULT3_20X	(0x0000)
-#define CCM_CCR_360_PLLMULT3_10X	(0x0001)
-#define CCM_CCR_360_PLLMULT3_24X	(0x0002)
-#define CCM_CCR_360_PLLMULT3_18X	(0x0003)
-#define CCM_CCR_360_PLLMULT3_12X	(0x0004)
-#define CCM_CCR_360_PLLMULT3_6X		(0x0005)
-#define CCM_CCR_360_PLLMULT3_16X	(0x0006)
-#define CCM_CCR_360_PLLMULT3_8X		(0x0007)
-
-/* Bit definitions and macros for CCR_256 */
-#define CCM_CCR_256_PLLMULT3(x)		(((x)&0x0007))	/* 3-Bit PLL clock mode */
-#define CCM_CCR_256_OSCMODE		(0x0008)	/* Oscillator clock mode */
-#define CCM_CCR_256_PLLMODE		(0x0010)	/* PLL Mode */
-#define CCM_CCR_256_FBCONFIG(x)		(((x)&0x0007)<<5)	/* Flexbus/PCI port size configuration */
-#define CCM_CCR_256_FBCONFIG_MASK	(0x00E0)
-#define CCM_CCR_256_FBCONFIG_NM_32	(0x0000)
-#define CCM_CCR_256_FBCONFIG_NM_8	(0x0020)
-#define CCM_CCR_256_FBCONFIG_NM_16	(0x0040)
-#define CCM_CCR_256_FBCONFIG_M_32	(0x0080)
-#define CCM_CCR_256_FBCONFIG_M_8	(0x00A0)
-#define CCM_CCR_256_FBCONFIG_M_16	(0x00C0)
-#define CCM_CCR_256_PLLMULT3_MASK	(0x0007)
-#define CCM_CCR_256_PLLMULT3_20X	(0x0000)
-#define CCM_CCR_256_PLLMULT3_10X	(0x0001)
-#define CCM_CCR_256_PLLMULT3_24X	(0x0002)
-#define CCM_CCR_256_PLLMULT3_18X	(0x0003)
-#define CCM_CCR_256_PLLMULT3_12X	(0x0004)
-#define CCM_CCR_256_PLLMULT3_6X		(0x0005)
-#define CCM_CCR_256_PLLMULT3_16X	(0x0006)
-#define CCM_CCR_256_PLLMULT3_8X		(0x0007)
-
-/* Bit definitions and macros for RCON_360 */
-#define CCM_RCON_360_PLLMULT(x)		(((x)&0x0003))	/* PLL clock mode */
-#define CCM_RCON_360_PCISLEW		(0x0004)	/* PCI pad slew rate mode */
-#define CCM_RCON_360_PCIMODE		(0x0008)	/* PCI host/agent mode */
-#define CCM_RCON_360_PLLMODE		(0x0010)	/* PLL Mode */
-#define CCM_RCON_360_FBCONFIG(x)	(((x)&0x0007)<<5)	/* Flexbus/PCI port size configuration */
-
-/* Bit definitions and macros for RCON_256 */
-#define CCM_RCON_256_PLLMULT(x)		(((x)&0x0007))	/* PLL clock mode */
-#define CCM_RCON_256_OSCMODE		(0x0008)	/* Oscillator clock mode */
-#define CCM_RCON_256_PLLMODE		(0x0010)	/* PLL Mode */
-#define CCM_RCON_256_FBCONFIG(x)	(((x)&0x0007)<<5)	/* Flexbus/PCI port size configuration */
-
-/* Bit definitions and macros for CIR */
-#define CCM_CIR_PRN(x)			(((x)&0x003F))	/* Part revision number */
-#define CCM_CIR_PIN(x)			(((x)&0x03FF)<<6)	/* Part identification number */
-#define CCM_CIR_PIN_MASK		(0xFFC0)
-#define CCM_CIR_PRN_MASK		(0x003F)
-#define CCM_CIR_PIN_MCF54450		(0x4F<<6)
-#define CCM_CIR_PIN_MCF54451		(0x4D<<6)
-#define CCM_CIR_PIN_MCF54452		(0x4B<<6)
-#define CCM_CIR_PIN_MCF54453		(0x49<<6)
-#define CCM_CIR_PIN_MCF54454		(0x4A<<6)
-#define CCM_CIR_PIN_MCF54455		(0x48<<6)
-
-/* Bit definitions and macros for MISCCR */
-#define CCM_MISCCR_USBSRC		(0x0001)	/* USB clock source */
-#define CCM_MISCCR_USBOC		(0x0002)	/* USB VBUS over-current sense polarity */
-#define CCM_MISCCR_USBPUE		(0x0004)	/* USB transceiver pull-up enable */
-#define CCM_MISCCR_SSISRC		(0x0010)	/* SSI clock source */
-#define CCM_MISCCR_TIMDMA		(0x0020)	/* Timer DMA mux selection */
-#define CCM_MISCCR_SSIPUS		(0x0040)	/* SSI RXD/TXD pull select */
-#define CCM_MISCCR_SSIPUE		(0x0080)	/* SSI RXD/TXD pull enable */
-#define CCM_MISCCR_BMT(x)		(((x)&0x0007)<<8)	/* Bus monitor timing field */
-#define CCM_MISCCR_BME			(0x0800)	/* Bus monitor external enable bit */
-#define CCM_MISCCR_LIMP			(0x1000)	/* Limp mode enable */
-#define CCM_MISCCR_BMT_65536		(0)
-#define CCM_MISCCR_BMT_32768		(1)
-#define CCM_MISCCR_BMT_16384		(2)
-#define CCM_MISCCR_BMT_8192		(3)
-#define CCM_MISCCR_BMT_4096		(4)
-#define CCM_MISCCR_BMT_2048		(5)
-#define CCM_MISCCR_BMT_1024		(6)
-#define CCM_MISCCR_BMT_512		(7)
-#define CCM_MISCCR_SSIPUS_UP		(1)
-#define CCM_MISCCR_SSIPUS_DOWN		(0)
-#define CCM_MISCCR_TIMDMA_TIM		(1)
-#define CCM_MISCCR_TIMDMA_SSI		(0)
-#define CCM_MISCCR_SSISRC_CLKIN		(0)
-#define CCM_MISCCR_SSISRC_PLL		(1)
-#define CCM_MISCCR_USBOC_ACTHI		(0)
-#define CCM_MISCCR_USBOV_ACTLO		(1)
-#define CCM_MISCCR_USBSRC_CLKIN		(0)
-#define CCM_MISCCR_USBSRC_PLL		(1)
-
-/* Bit definitions and macros for CDR */
-#define CCM_CDR_SSIDIV(x)		(((x)&0x00FF))	/* SSI oversampling clock divider */
-#define CCM_CDR_LPDIV(x)		(((x)&0x000F)<<8)	/* Low power clock divider */
-
-/* Bit definitions and macros for UOCSR */
-#define CCM_UOCSR_XPDE			(0x0001)	/* On-chip transceiver pull-down enable */
-#define CCM_UOCSR_UOMIE			(0x0002)	/* USB OTG misc interrupt enable */
-#define CCM_UOCSR_WKUP			(0x0004)	/* USB OTG controller wake-up event */
-#define CCM_UOCSR_PWRFLT		(0x0008)	/* VBUS power fault */
-#define CCM_UOCSR_SEND			(0x0010)	/* Session end */
-#define CCM_UOCSR_VVLD			(0x0020)	/* VBUS valid indicator */
-#define CCM_UOCSR_BVLD			(0x0040)	/* B-peripheral valid indicator */
-#define CCM_UOCSR_AVLD			(0x0080)	/* A-peripheral valid indicator */
-#define CCM_UOCSR_DPPU			(0x0100)	/* D+ pull-up for FS enabled (read-only) */
-#define CCM_UOCSR_DCR_VBUS		(0x0200)	/* VBUS discharge resistor enabled (read-only) */
-#define CCM_UOCSR_CRG_VBUS		(0x0400)	/* VBUS charge resistor enabled (read-only) */
-#define CCM_UOCSR_DMPD			(0x1000)	/* D- 15Kohm pull-down (read-only) */
-#define CCM_UOCSR_DPPD			(0x2000)	/* D+ 15Kohm pull-down (read-only) */
-
-/*********************************************************************
-* General Purpose I/O Module (GPIO)
-*********************************************************************/
-
-/* Bit definitions and macros for PAR_FEC */
-#define GPIO_PAR_FEC_FEC0(x)		(((x)&0x07))
-#define GPIO_PAR_FEC_FEC1(x)		(((x)&0x07)<<4)
-#define GPIO_PAR_FEC_FEC1_UNMASK	(0x8F)
-#define GPIO_PAR_FEC_FEC1_MII		(0x70)
-#define GPIO_PAR_FEC_FEC1_RMII_GPIO	(0x30)
-#define GPIO_PAR_FEC_FEC1_RMII_ATA	(0x20)
-#define GPIO_PAR_FEC_FEC1_ATA		(0x10)
-#define GPIO_PAR_FEC_FEC1_GPIO		(0x00)
-#define GPIO_PAR_FEC_FEC0_UNMASK	(0xF8)
-#define GPIO_PAR_FEC_FEC0_MII		(0x07)
-#define GPIO_PAR_FEC_FEC0_RMII_GPIO	(0x03)
-#define GPIO_PAR_FEC_FEC0_RMII_ULPI	(0x02)
-#define GPIO_PAR_FEC_FEC0_ULPI		(0x01)
-#define GPIO_PAR_FEC_FEC0_GPIO		(0x00)
-
-/* Bit definitions and macros for PAR_DMA */
-#define GPIO_PAR_DMA_DREQ0		(0x01)
-#define GPIO_PAR_DMA_DACK0(x)		(((x)&0x03)<<2)
-#define GPIO_PAR_DMA_DREQ1(x)		(((x)&0x03)<<4)
-#define GPIO_PAR_DMA_DACK1(x)		(((x)&0x03)<<6)
-#define GPIO_PAR_DMA_DACK1_UNMASK	(0x3F)
-#define GPIO_PAR_DMA_DACK1_DACK1	(0xC0)
-#define GPIO_PAR_DMA_DACK1_ULPI_DIR	(0x40)
-#define GPIO_PAR_DMA_DACK1_GPIO		(0x00)
-#define GPIO_PAR_DMA_DREQ1_UNMASK	(0xCF)
-#define GPIO_PAR_DMA_DREQ1_DREQ1	(0x30)
-#define GPIO_PAR_DMA_DREQ1_USB_CLKIN	(0x10)
-#define GPIO_PAR_DMA_DREQ1_GPIO		(0x00)
-#define GPIO_PAR_DMA_DACK0_UNMASK	(0xF3)
-#define GPIO_PAR_DMA_DACK0_DACK1	(0x0C)
-#define GPIO_PAR_DMA_DACK0_PCS3		(0x08)
-#define GPIO_PAR_DMA_DACK0_ULPI_DIR	(0x04)
-#define GPIO_PAR_DMA_DACK0_GPIO		(0x00)
-#define GPIO_PAR_DMA_DREQ0_DREQ0	(0x01)
-#define GPIO_PAR_DMA_DREQ0_GPIO		(0x00)
-
-/* Bit definitions and macros for PAR_FBCTL */
-#define GPIO_PAR_FBCTL_TS(x)		(((x)&0x03)<<3)
-#define GPIO_PAR_FBCTL_RW		(0x20)
-#define GPIO_PAR_FBCTL_TA		(0x40)
-#define GPIO_PAR_FBCTL_OE		(0x80)
-#define GPIO_PAR_FBCTL_OE_OE		(0x80)
-#define GPIO_PAR_FBCTL_OE_GPIO		(0x00)
-#define GPIO_PAR_FBCTL_TA_TA		(0x40)
-#define GPIO_PAR_FBCTL_TA_GPIO		(0x00)
-#define GPIO_PAR_FBCTL_RW_RW		(0x20)
-#define GPIO_PAR_FBCTL_RW_GPIO		(0x00)
-#define GPIO_PAR_FBCTL_TS_UNMASK	(0xE7)
-#define GPIO_PAR_FBCTL_TS_TS		(0x18)
-#define GPIO_PAR_FBCTL_TS_ALE		(0x10)
-#define GPIO_PAR_FBCTL_TS_TBST		(0x08)
-#define GPIO_PAR_FBCTL_TS_GPIO		(0x80)
-
-/* Bit definitions and macros for PAR_DSPI */
-#define GPIO_PAR_DSPI_SCK		(0x01)
-#define GPIO_PAR_DSPI_SOUT		(0x02)
-#define GPIO_PAR_DSPI_SIN		(0x04)
-#define GPIO_PAR_DSPI_PCS0		(0x08)
-#define GPIO_PAR_DSPI_PCS1		(0x10)
-#define GPIO_PAR_DSPI_PCS2		(0x20)
-#define GPIO_PAR_DSPI_PCS5		(0x40)
-#define GPIO_PAR_DSPI_PCS5_PCS5		(0x40)
-#define GPIO_PAR_DSPI_PCS5_GPIO		(0x00)
-#define GPIO_PAR_DSPI_PCS2_PCS2		(0x20)
-#define GPIO_PAR_DSPI_PCS2_GPIO		(0x00)
-#define GPIO_PAR_DSPI_PCS1_PCS1		(0x10)
-#define GPIO_PAR_DSPI_PCS1_GPIO		(0x00)
-#define GPIO_PAR_DSPI_PCS0_PCS0		(0x08)
-#define GPIO_PAR_DSPI_PCS0_GPIO		(0x00)
-#define GPIO_PAR_DSPI_SIN_SIN		(0x04)
-#define GPIO_PAR_DSPI_SIN_GPIO		(0x00)
-#define GPIO_PAR_DSPI_SOUT_SOUT		(0x02)
-#define GPIO_PAR_DSPI_SOUT_GPIO		(0x00)
-#define GPIO_PAR_DSPI_SCK_SCK		(0x01)
-#define GPIO_PAR_DSPI_SCK_GPIO		(0x00)
-
-/* Bit definitions and macros for PAR_BE */
-#define GPIO_PAR_BE_BS0			(0x01)
-#define GPIO_PAR_BE_BS1			(0x04)
-#define GPIO_PAR_BE_BS2(x)		(((x)&0x03)<<4)
-#define GPIO_PAR_BE_BS3(x)		(((x)&0x03)<<6)
-#define GPIO_PAR_BE_BE3_UNMASK		(0x3F)
-#define GPIO_PAR_BE_BE3_BE3		(0xC0)
-#define GPIO_PAR_BE_BE3_TSIZ1		(0x80)
-#define GPIO_PAR_BE_BE3_GPIO		(0x00)
-#define GPIO_PAR_BE_BE2_UNMASK		(0xCF)
-#define GPIO_PAR_BE_BE2_BE2		(0x30)
-#define GPIO_PAR_BE_BE2_TSIZ0		(0x20)
-#define GPIO_PAR_BE_BE2_GPIO		(0x00)
-#define GPIO_PAR_BE_BE1_BE1		(0x04)
-#define GPIO_PAR_BE_BE1_GPIO		(0x00)
-#define GPIO_PAR_BE_BE0_BE0		(0x01)
-#define GPIO_PAR_BE_BE0_GPIO		(0x00)
-
-/* Bit definitions and macros for PAR_CS */
-#define GPIO_PAR_CS_CS1			(0x02)
-#define GPIO_PAR_CS_CS2			(0x04)
-#define GPIO_PAR_CS_CS3			(0x08)
-#define GPIO_PAR_CS_CS3_CS3		(0x08)
-#define GPIO_PAR_CS_CS3_GPIO		(0x00)
-#define GPIO_PAR_CS_CS2_CS2		(0x04)
-#define GPIO_PAR_CS_CS2_GPIO		(0x00)
-#define GPIO_PAR_CS_CS1_CS1		(0x02)
-#define GPIO_PAR_CS_CS1_GPIO		(0x00)
-
-/* Bit definitions and macros for PAR_TIMER */
-#define GPIO_PAR_TIMER_T0IN(x)		(((x)&0x03))
-#define GPIO_PAR_TIMER_T1IN(x)		(((x)&0x03)<<2)
-#define GPIO_PAR_TIMER_T2IN(x)		(((x)&0x03)<<4)
-#define GPIO_PAR_TIMER_T3IN(x)		(((x)&0x03)<<6)
-#define GPIO_PAR_TIMER_T3IN_UNMASK	(0x3F)
-#define GPIO_PAR_TIMER_T3IN_T3IN	(0xC0)
-#define GPIO_PAR_TIMER_T3IN_T3OUT	(0x80)
-#define GPIO_PAR_TIMER_T3IN_U2RXD	(0x40)
-#define GPIO_PAR_TIMER_T3IN_GPIO	(0x00)
-#define GPIO_PAR_TIMER_T2IN_UNMASK	(0xCF)
-#define GPIO_PAR_TIMER_T2IN_T2IN	(0x30)
-#define GPIO_PAR_TIMER_T2IN_T2OUT	(0x20)
-#define GPIO_PAR_TIMER_T2IN_U2TXD	(0x10)
-#define GPIO_PAR_TIMER_T2IN_GPIO	(0x00)
-#define GPIO_PAR_TIMER_T1IN_UNMASK	(0xF3)
-#define GPIO_PAR_TIMER_T1IN_T1IN	(0x0C)
-#define GPIO_PAR_TIMER_T1IN_T1OUT	(0x08)
-#define GPIO_PAR_TIMER_T1IN_U2CTS	(0x04)
-#define GPIO_PAR_TIMER_T1IN_GPIO	(0x00)
-#define GPIO_PAR_TIMER_T0IN_UNMASK	(0xFC)
-#define GPIO_PAR_TIMER_T0IN_T0IN	(0x03)
-#define GPIO_PAR_TIMER_T0IN_T0OUT	(0x02)
-#define GPIO_PAR_TIMER_T0IN_U2RTS	(0x01)
-#define GPIO_PAR_TIMER_T0IN_GPIO	(0x00)
-
-/* Bit definitions and macros for PAR_USB */
-#define GPIO_PAR_USB_VBUSOC(x)		(((x)&0x03))
-#define GPIO_PAR_USB_VBUSEN(x)		(((x)&0x03)<<2)
-#define GPIO_PAR_USB_VBUSEN_UNMASK	(0xF3)
-#define GPIO_PAR_USB_VBUSEN_VBUSEN	(0x0C)
-#define GPIO_PAR_USB_VBUSEN_USBPULLUP	(0x08)
-#define GPIO_PAR_USB_VBUSEN_ULPI_NXT	(0x04)
-#define GPIO_PAR_USB_VBUSEN_GPIO	(0x00)
-#define GPIO_PAR_USB_VBUSOC_UNMASK	(0xFC)
-#define GPIO_PAR_USB_VBUSOC_VBUSOC	(0x03)
-#define GPIO_PAR_USB_VBUSOC_ULPI_STP	(0x01)
-#define GPIO_PAR_USB_VBUSOC_GPIO	(0x00)
-
-/* Bit definitions and macros for PAR_UART */
-#define GPIO_PAR_UART_U0TXD		(0x01)
-#define GPIO_PAR_UART_U0RXD		(0x02)
-#define GPIO_PAR_UART_U0RTS		(0x04)
-#define GPIO_PAR_UART_U0CTS		(0x08)
-#define GPIO_PAR_UART_U1TXD		(0x10)
-#define GPIO_PAR_UART_U1RXD		(0x20)
-#define GPIO_PAR_UART_U1RTS		(0x40)
-#define GPIO_PAR_UART_U1CTS		(0x80)
-#define GPIO_PAR_UART_U1CTS_U1CTS	(0x80)
-#define GPIO_PAR_UART_U1CTS_GPIO	(0x00)
-#define GPIO_PAR_UART_U1RTS_U1RTS	(0x40)
-#define GPIO_PAR_UART_U1RTS_GPIO	(0x00)
-#define GPIO_PAR_UART_U1RXD_U1RXD	(0x20)
-#define GPIO_PAR_UART_U1RXD_GPIO	(0x00)
-#define GPIO_PAR_UART_U1TXD_U1TXD	(0x10)
-#define GPIO_PAR_UART_U1TXD_GPIO	(0x00)
-#define GPIO_PAR_UART_U0CTS_U0CTS	(0x08)
-#define GPIO_PAR_UART_U0CTS_GPIO	(0x00)
-#define GPIO_PAR_UART_U0RTS_U0RTS	(0x04)
-#define GPIO_PAR_UART_U0RTS_GPIO	(0x00)
-#define GPIO_PAR_UART_U0RXD_U0RXD	(0x02)
-#define GPIO_PAR_UART_U0RXD_GPIO	(0x00)
-#define GPIO_PAR_UART_U0TXD_U0TXD	(0x01)
-#define GPIO_PAR_UART_U0TXD_GPIO	(0x00)
-
-/* Bit definitions and macros for PAR_FECI2C */
-#define GPIO_PAR_FECI2C_SDA(x)		(((x)&0x0003))
-#define GPIO_PAR_FECI2C_SCL(x)		(((x)&0x0003)<<2)
-#define GPIO_PAR_FECI2C_MDIO0		(0x0010)
-#define GPIO_PAR_FECI2C_MDC0		(0x0040)
-#define GPIO_PAR_FECI2C_MDIO1(x)	(((x)&0x0003)<<8)
-#define GPIO_PAR_FECI2C_MDC1(x)		(((x)&0x0003)<<10)
-#define GPIO_PAR_FECI2C_MDC1_UNMASK	(0xF3FF)
-#define GPIO_PAR_FECI2C_MDC1_MDC1	(0x0C00)
-#define GPIO_PAR_FECI2C_MDC1_ATA_DIOR	(0x0800)
-#define GPIO_PAR_FECI2C_MDC1_GPIO	(0x0000)
-#define GPIO_PAR_FECI2C_MDIO1_UNMASK	(0xFCFF)
-#define GPIO_PAR_FECI2C_MDIO1_MDIO1	(0x0300)
-#define GPIO_PAR_FECI2C_MDIO1_ATA_DIOW	(0x0200)
-#define GPIO_PAR_FECI2C_MDIO1_GPIO	(0x0000)
-#define GPIO_PAR_FECI2C_MDC0_MDC0	(0x0040)
-#define GPIO_PAR_FECI2C_MDC0_GPIO	(0x0000)
-#define GPIO_PAR_FECI2C_MDIO0_MDIO0	(0x0010)
-#define GPIO_PAR_FECI2C_MDIO0_GPIO	(0x0000)
-#define GPIO_PAR_FECI2C_SCL_UNMASK	(0xFFF3)
-#define GPIO_PAR_FECI2C_SCL_SCL		(0x000C)
-#define GPIO_PAR_FECI2C_SCL_U2TXD	(0x0004)
-#define GPIO_PAR_FECI2C_SCL_GPIO	(0x0000)
-#define GPIO_PAR_FECI2C_SDA_UNMASK	(0xFFFC)
-#define GPIO_PAR_FECI2C_SDA_SDA		(0x0003)
-#define GPIO_PAR_FECI2C_SDA_U2RXD	(0x0001)
-#define GPIO_PAR_FECI2C_SDA_GPIO	(0x0000)
-
-/* Bit definitions and macros for PAR_SSI */
-#define GPIO_PAR_SSI_MCLK		(0x0001)
-#define GPIO_PAR_SSI_STXD(x)		(((x)&0x0003)<<2)
-#define GPIO_PAR_SSI_SRXD(x)		(((x)&0x0003)<<4)
-#define GPIO_PAR_SSI_FS(x)		(((x)&0x0003)<<6)
-#define GPIO_PAR_SSI_BCLK(x)		(((x)&0x0003)<<8)
-#define GPIO_PAR_SSI_BCLK_UNMASK	(0xFCFF)
-#define GPIO_PAR_SSI_BCLK_BCLK		(0x0300)
-#define GPIO_PAR_SSI_BCLK_U1CTS		(0x0200)
-#define GPIO_PAR_SSI_BCLK_GPIO		(0x0000)
-#define GPIO_PAR_SSI_FS_UNMASK		(0xFF3F)
-#define GPIO_PAR_SSI_FS_FS		(0x00C0)
-#define GPIO_PAR_SSI_FS_U1RTS		(0x0080)
-#define GPIO_PAR_SSI_FS_GPIO		(0x0000)
-#define GPIO_PAR_SSI_SRXD_UNMASK	(0xFFCF)
-#define GPIO_PAR_SSI_SRXD_SRXD		(0x0030)
-#define GPIO_PAR_SSI_SRXD_U1RXD		(0x0020)
-#define GPIO_PAR_SSI_SRXD_GPIO		(0x0000)
-#define GPIO_PAR_SSI_STXD_UNMASK	(0xFFF3)
-#define GPIO_PAR_SSI_STXD_STXD		(0x000C)
-#define GPIO_PAR_SSI_STXD_U1TXD		(0x0008)
-#define GPIO_PAR_SSI_STXD_GPIO		(0x0000)
-#define GPIO_PAR_SSI_MCLK_MCLK		(0x0001)
-#define GPIO_PAR_SSI_MCLK_GPIO		(0x0000)
-
-/* Bit definitions and macros for PAR_ATA */
-#define GPIO_PAR_ATA_IORDY		(0x0001)
-#define GPIO_PAR_ATA_DMARQ		(0x0002)
-#define GPIO_PAR_ATA_RESET		(0x0004)
-#define GPIO_PAR_ATA_DA0		(0x0020)
-#define GPIO_PAR_ATA_DA1		(0x0040)
-#define GPIO_PAR_ATA_DA2		(0x0080)
-#define GPIO_PAR_ATA_CS0		(0x0100)
-#define GPIO_PAR_ATA_CS1		(0x0200)
-#define GPIO_PAR_ATA_BUFEN		(0x0400)
-#define GPIO_PAR_ATA_BUFEN_BUFEN	(0x0400)
-#define GPIO_PAR_ATA_BUFEN_GPIO		(0x0000)
-#define GPIO_PAR_ATA_CS1_CS1		(0x0200)
-#define GPIO_PAR_ATA_CS1_GPIO		(0x0000)
-#define GPIO_PAR_ATA_CS0_CS0		(0x0100)
-#define GPIO_PAR_ATA_CS0_GPIO		(0x0000)
-#define GPIO_PAR_ATA_DA2_DA2		(0x0080)
-#define GPIO_PAR_ATA_DA2_GPIO		(0x0000)
-#define GPIO_PAR_ATA_DA1_DA1		(0x0040)
-#define GPIO_PAR_ATA_DA1_GPIO		(0x0000)
-#define GPIO_PAR_ATA_DA0_DA0		(0x0020)
-#define GPIO_PAR_ATA_DA0_GPIO		(0x0000)
-#define GPIO_PAR_ATA_RESET_RESET	(0x0004)
-#define GPIO_PAR_ATA_RESET_GPIO		(0x0000)
-#define GPIO_PAR_ATA_DMARQ_DMARQ	(0x0002)
-#define GPIO_PAR_ATA_DMARQ_GPIO		(0x0000)
-#define GPIO_PAR_ATA_IORDY_IORDY	(0x0001)
-#define GPIO_PAR_ATA_IORDY_GPIO		(0x0000)
-
-/* Bit definitions and macros for PAR_IRQ */
-#define GPIO_PAR_IRQ_IRQ1		(0x02)
-#define GPIO_PAR_IRQ_IRQ4		(0x10)
-#define GPIO_PAR_IRQ_IRQ4_IRQ4		(0x10)
-#define GPIO_PAR_IRQ_IRQ4_GPIO		(0x00)
-#define GPIO_PAR_IRQ_IRQ1_IRQ1		(0x02)
-#define GPIO_PAR_IRQ_IRQ1_GPIO		(0x00)
-
-/* Bit definitions and macros for PAR_PCI */
-#define GPIO_PAR_PCI_REQ0		(0x0001)
-#define GPIO_PAR_PCI_REQ1		(0x0004)
-#define GPIO_PAR_PCI_REQ2		(0x0010)
-#define GPIO_PAR_PCI_REQ3(x)		(((x)&0x0003)<<6)
-#define GPIO_PAR_PCI_GNT0		(0x0100)
-#define GPIO_PAR_PCI_GNT1		(0x0400)
-#define GPIO_PAR_PCI_GNT2		(0x1000)
-#define GPIO_PAR_PCI_GNT3(x)		(((x)&0x0003)<<14)
-#define GPIO_PAR_PCI_GNT3_UNMASK	(0x3FFF)
-#define GPIO_PAR_PCI_GNT3_GNT3		(0xC000)
-#define GPIO_PAR_PCI_GNT3_ATA_DMACK	(0x8000)
-#define GPIO_PAR_PCI_GNT3_GPIO		(0x0000)
-#define GPIO_PAR_PCI_GNT2_GNT2		(0x1000)
-#define GPIO_PAR_PCI_GNT2_GPIO		(0x0000)
-#define GPIO_PAR_PCI_GNT1_GNT1		(0x0400)
-#define GPIO_PAR_PCI_GNT1_GPIO		(0x0000)
-#define GPIO_PAR_PCI_GNT0_GNT0		(0x0100)
-#define GPIO_PAR_PCI_GNT0_GPIO		(0x0000)
-#define GPIO_PAR_PCI_REQ3_UNMASK	(0xFF3F)
-#define GPIO_PAR_PCI_REQ3_REQ3		(0x00C0)
-#define GPIO_PAR_PCI_REQ3_ATA_INTRQ	(0x0080)
-#define GPIO_PAR_PCI_REQ3_GPIO		(0x0000)
-#define GPIO_PAR_PCI_REQ2_REQ2		(0x0010)
-#define GPIO_PAR_PCI_REQ2_GPIO		(0x0000)
-#define GPIO_PAR_PCI_REQ1_REQ1		(0x0040)
-#define GPIO_PAR_PCI_REQ1_GPIO		(0x0000)
-#define GPIO_PAR_PCI_REQ0_REQ0		(0x0001)
-#define GPIO_PAR_PCI_REQ0_GPIO		(0x0000)
-
-/* Bit definitions and macros for MSCR_SDRAM */
-#define GPIO_MSCR_SDRAM_SDCTL(x)	(((x)&0x03))
-#define GPIO_MSCR_SDRAM_SDCLK(x)	(((x)&0x03)<<2)
-#define GPIO_MSCR_SDRAM_SDDQS(x)	(((x)&0x03)<<4)
-#define GPIO_MSCR_SDRAM_SDDATA(x)	(((x)&0x03)<<6)
-#define GPIO_MSCR_SDRAM_SDDATA_UNMASK	(0x3F)
-#define GPIO_MSCR_SDRAM_SDDATA_DDR1	(0xC0)
-#define GPIO_MSCR_SDRAM_SDDATA_DDR2	(0x80)
-#define GPIO_MSCR_SDRAM_SDDATA_FS_LPDDR	(0x40)
-#define GPIO_MSCR_SDRAM_SDDATA_HS_LPDDR	(0x00)
-#define GPIO_MSCR_SDRAM_SDDQS_UNMASK	(0xCF)
-#define GPIO_MSCR_SDRAM_SDDQS_DDR1	(0x30)
-#define GPIO_MSCR_SDRAM_SDDQS_DDR2	(0x20)
-#define GPIO_MSCR_SDRAM_SDDQS_FS_LPDDR	(0x10)
-#define GPIO_MSCR_SDRAM_SDDQS_HS_LPDDR	(0x00)
-#define GPIO_MSCR_SDRAM_SDCLK_UNMASK	(0xF3)
-#define GPIO_MSCR_SDRAM_SDCLK_DDR1	(0x0C)
-#define GPIO_MSCR_SDRAM_SDCLK_DDR2	(0x08)
-#define GPIO_MSCR_SDRAM_SDCLK_FS_LPDDR	(0x04)
-#define GPIO_MSCR_SDRAM_SDCLK_HS_LPDDR	(0x00)
-#define GPIO_MSCR_SDRAM_SDCTL_UNMASK	(0xFC)
-#define GPIO_MSCR_SDRAM_SDCTL_DDR1	(0x03)
-#define GPIO_MSCR_SDRAM_SDCTL_DDR2	(0x02)
-#define GPIO_MSCR_SDRAM_SDCTL_FS_LPDDR	(0x01)
-#define GPIO_MSCR_SDRAM_SDCTL_HS_LPDDR	(0x00)
-
-/* Bit definitions and macros for MSCR_PCI */
-#define GPIO_MSCR_PCI_PCI		(0x01)
-#define GPIO_MSCR_PCI_PCI_HI_66MHZ	(0x01)
-#define GPIO_MSCR_PCI_PCI_LO_33MHZ	(0x00)
-
-/* Bit definitions and macros for DSCR_I2C */
-#define GPIO_DSCR_I2C_I2C(x)		(((x)&0x03))
-#define GPIO_DSCR_I2C_I2C_LOAD_50PF	(0x03)
-#define GPIO_DSCR_I2C_I2C_LOAD_30PF	(0x02)
-#define GPIO_DSCR_I2C_I2C_LOAD_20PF	(0x01)
-#define GPIO_DSCR_I2C_I2C_LOAD_10PF	(0x00)
-
-/* Bit definitions and macros for DSCR_FLEXBUS */
-#define GPIO_DSCR_FLEXBUS_FBADL(x)		(((x)&0x03))
-#define GPIO_DSCR_FLEXBUS_FBADH(x)		(((x)&0x03)<<2)
-#define GPIO_DSCR_FLEXBUS_FBCTL(x)		(((x)&0x03)<<4)
-#define GPIO_DSCR_FLEXBUS_FBCLK(x)		(((x)&0x03)<<6)
-#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_50PF	(0xC0)
-#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_30PF	(0x80)
-#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_20PF	(0x40)
-#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_10PF	(0x00)
-#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_50PF	(0x30)
-#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_30PF	(0x20)
-#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_20PF	(0x10)
-#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_10PF	(0x00)
-#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_50PF	(0x0C)
-#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_30PF	(0x08)
-#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_20PF	(0x04)
-#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_10PF	(0x00)
-#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_50PF	(0x03)
-#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_30PF	(0x02)
-#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_20PF	(0x01)
-#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_10PF	(0x00)
-
-/* Bit definitions and macros for DSCR_FEC */
-#define GPIO_DSCR_FEC_FEC0(x)		(((x)&0x03))
-#define GPIO_DSCR_FEC_FEC1(x)		(((x)&0x03)<<2)
-#define GPIO_DSCR_FEC_FEC1_LOAD_50PF	(0x0C)
-#define GPIO_DSCR_FEC_FEC1_LOAD_30PF	(0x08)
-#define GPIO_DSCR_FEC_FEC1_LOAD_20PF	(0x04)
-#define GPIO_DSCR_FEC_FEC1_LOAD_10PF	(0x00)
-#define GPIO_DSCR_FEC_FEC0_LOAD_50PF	(0x03)
-#define GPIO_DSCR_FEC_FEC0_LOAD_30PF	(0x02)
-#define GPIO_DSCR_FEC_FEC0_LOAD_20PF	(0x01)
-#define GPIO_DSCR_FEC_FEC0_LOAD_10PF	(0x00)
-
-/* Bit definitions and macros for DSCR_UART */
-#define GPIO_DSCR_UART_UART0(x)		(((x)&0x03))
-#define GPIO_DSCR_UART_UART1(x)		(((x)&0x03)<<2)
-#define GPIO_DSCR_UART_UART1_LOAD_50PF	(0x0C)
-#define GPIO_DSCR_UART_UART1_LOAD_30PF	(0x08)
-#define GPIO_DSCR_UART_UART1_LOAD_20PF	(0x04)
-#define GPIO_DSCR_UART_UART1_LOAD_10PF	(0x00)
-#define GPIO_DSCR_UART_UART0_LOAD_50PF	(0x03)
-#define GPIO_DSCR_UART_UART0_LOAD_30PF	(0x02)
-#define GPIO_DSCR_UART_UART0_LOAD_20PF	(0x01)
-#define GPIO_DSCR_UART_UART0_LOAD_10PF	(0x00)
-
-/* Bit definitions and macros for DSCR_DSPI */
-#define GPIO_DSCR_DSPI_DSPI(x)		(((x)&0x03))
-#define GPIO_DSCR_DSPI_DSPI_LOAD_50PF	(0x03)
-#define GPIO_DSCR_DSPI_DSPI_LOAD_30PF	(0x02)
-#define GPIO_DSCR_DSPI_DSPI_LOAD_20PF	(0x01)
-#define GPIO_DSCR_DSPI_DSPI_LOAD_10PF	(0x00)
-
-/* Bit definitions and macros for DSCR_TIMER */
-#define GPIO_DSCR_TIMER_TIMER(x)	(((x)&0x03))
-#define GPIO_DSCR_TIMER_TIMER_LOAD_50PF	(0x03)
-#define GPIO_DSCR_TIMER_TIMER_LOAD_30PF	(0x02)
-#define GPIO_DSCR_TIMER_TIMER_LOAD_20PF	(0x01)
-#define GPIO_DSCR_TIMER_TIMER_LOAD_10PF	(0x00)
-
-/* Bit definitions and macros for DSCR_SSI */
-#define GPIO_DSCR_SSI_SSI(x)		(((x)&0x03))
-#define GPIO_DSCR_SSI_SSI_LOAD_50PF	(0x03)
-#define GPIO_DSCR_SSI_SSI_LOAD_30PF	(0x02)
-#define GPIO_DSCR_SSI_SSI_LOAD_20PF	(0x01)
-#define GPIO_DSCR_SSI_SSI_LOAD_10PF	(0x00)
-
-/* Bit definitions and macros for DSCR_DMA */
-#define GPIO_DSCR_DMA_DMA(x)		(((x)&0x03))
-#define GPIO_DSCR_DMA_DMA_LOAD_50PF	(0x03)
-#define GPIO_DSCR_DMA_DMA_LOAD_30PF	(0x02)
-#define GPIO_DSCR_DMA_DMA_LOAD_20PF	(0x01)
-#define GPIO_DSCR_DMA_DMA_LOAD_10PF	(0x00)
-
-/* Bit definitions and macros for DSCR_DEBUG */
-#define GPIO_DSCR_DEBUG_DEBUG(x)	(((x)&0x03))
-#define GPIO_DSCR_DEBUG_DEBUG_LOAD_50PF	(0x03)
-#define GPIO_DSCR_DEBUG_DEBUG_LOAD_30PF	(0x02)
-#define GPIO_DSCR_DEBUG_DEBUG_LOAD_20PF	(0x01)
-#define GPIO_DSCR_DEBUG_DEBUG_LOAD_10PF	(0x00)
-
-/* Bit definitions and macros for DSCR_RESET */
-#define GPIO_DSCR_RESET_RESET(x)	(((x)&0x03))
-#define GPIO_DSCR_RESET_RESET_LOAD_50PF	(0x03)
-#define GPIO_DSCR_RESET_RESET_LOAD_30PF	(0x02)
-#define GPIO_DSCR_RESET_RESET_LOAD_20PF	(0x01)
-#define GPIO_DSCR_RESET_RESET_LOAD_10PF	(0x00)
-
-/* Bit definitions and macros for DSCR_IRQ */
-#define GPIO_DSCR_IRQ_IRQ(x)		(((x)&0x03))
-#define GPIO_DSCR_IRQ_IRQ_LOAD_50PF	(0x03)
-#define GPIO_DSCR_IRQ_IRQ_LOAD_30PF	(0x02)
-#define GPIO_DSCR_IRQ_IRQ_LOAD_20PF	(0x01)
-#define GPIO_DSCR_IRQ_IRQ_LOAD_10PF	(0x00)
-
-/* Bit definitions and macros for DSCR_USB */
-#define GPIO_DSCR_USB_USB(x)		(((x)&0x03))
-#define GPIO_DSCR_USB_USB_LOAD_50PF	(0x03)
-#define GPIO_DSCR_USB_USB_LOAD_30PF	(0x02)
-#define GPIO_DSCR_USB_USB_LOAD_20PF	(0x01)
-#define GPIO_DSCR_USB_USB_LOAD_10PF	(0x00)
-
-/* Bit definitions and macros for DSCR_ATA */
-#define GPIO_DSCR_ATA_ATA(x)		(((x)&0x03))
-#define GPIO_DSCR_ATA_ATA_LOAD_50PF	(0x03)
-#define GPIO_DSCR_ATA_ATA_LOAD_30PF	(0x02)
-#define GPIO_DSCR_ATA_ATA_LOAD_20PF	(0x01)
-#define GPIO_DSCR_ATA_ATA_LOAD_10PF	(0x00)
-
-/*********************************************************************
-* SDRAM Controller (SDRAMC)
-*********************************************************************/
-
-/* Bit definitions and macros for SDMR */
-#define SDRAMC_SDMR_DDR2_AD(x)		(((x)&0x00003FFF))	/* Address for DDR2 */
-#define SDRAMC_SDMR_CMD			(0x00010000)	/* Command */
-#define SDRAMC_SDMR_AD(x)		(((x)&0x00000FFF)<<18)	/* Address */
-#define SDRAMC_SDMR_BK(x)		(((x)&0x00000003)<<30)	/* Bank Address */
-#define SDRAMC_SDMR_BK_LMR		(0x00000000)
-#define SDRAMC_SDMR_BK_LEMR		(0x40000000)
-
-/* Bit definitions and macros for SDCR */
-#define SDRAMC_SDCR_DPD			(0x00000001)	/* Deep Power-Down Mode */
-#define SDRAMC_SDCR_IPALL		(0x00000002)	/* Initiate Precharge All */
-#define SDRAMC_SDCR_IREF		(0x00000004)	/* Initiate Refresh */
-#define SDRAMC_SDCR_DQS_OE(x)		(((x)&0x00000003)<<10)	/* DQS Output Enable */
-#define SDRAMC_SDCR_MEM_PS		(0x00002000)	/* Data Port Size */
-#define SDRAMC_SDCR_REF_CNT(x)		(((x)&0x0000003F)<<16)	/* Periodic Refresh Counter */
-#define SDRAMC_SDCR_OE_RULE		(0x00400000)	/* Drive Rule Selection */
-#define SDRAMC_SDCR_ADDR_MUX(x)		(((x)&0x00000003)<<24)	/* Internal Address Mux Select */
-#define SDRAMC_SDCR_DDR2_MODE		(0x08000000)	/* DDR2 Mode Select */
-#define SDRAMC_SDCR_REF_EN		(0x10000000)	/* Refresh Enable */
-#define SDRAMC_SDCR_DDR_MODE		(0x20000000)	/* DDR Mode Select */
-#define SDRAMC_SDCR_CKE			(0x40000000)	/* Clock Enable */
-#define SDRAMC_SDCR_MODE_EN		(0x80000000)	/* SDRAM Mode Register Programming Enable */
-#define SDRAMC_SDCR_DQS_OE_BOTH		(0x00000C000)
-
-/* Bit definitions and macros for SDCFG1 */
-#define SDRAMC_SDCFG1_WT_LAT(x)		(((x)&0x00000007)<<4)	/* Write Latency */
-#define SDRAMC_SDCFG1_REF2ACT(x)	(((x)&0x0000000F)<<8)	/* Refresh to active delay */
-#define SDRAMC_SDCFG1_PRE2ACT(x)	(((x)&0x00000007)<<12)	/* Precharge to active delay */
-#define SDRAMC_SDCFG1_ACT2RW(x)		(((x)&0x00000007)<<16)	/* Active to read/write delay */
-#define SDRAMC_SDCFG1_RD_LAT(x)		(((x)&0x0000000F)<<20)	/* Read CAS Latency */
-#define SDRAMC_SDCFG1_SWT2RWP(x)	(((x)&0x00000007)<<24)	/* Single write to read/write/precharge delay */
-#define SDRAMC_SDCFG1_SRD2RWP(x)	(((x)&0x0000000F)<<28)	/* Single read to read/write/precharge delay */
-
-/* Bit definitions and macros for SDCFG2 */
-#define SDRAMC_SDCFG2_BL(x)		(((x)&0x0000000F)<<16)	/* Burst Length */
-#define SDRAMC_SDCFG2_BRD2W(x)		(((x)&0x0000000F)<<20)	/* Burst read to write delay */
-#define SDRAMC_SDCFG2_BWT2RWP(x)	(((x)&0x0000000F)<<24)	/* Burst write to read/write/precharge delay */
-#define SDRAMC_SDCFG2_BRD2RP(x)		(((x)&0x0000000F)<<28)	/* Burst read to read/precharge delay */
-
-/* Bit definitions and macros for SDCS group */
-#define SDRAMC_SDCS_CSSZ(x)		(((x)&0x0000001F))	/* Chip-Select Size */
-#define SDRAMC_SDCS_CSBA(x)		(((x)&0x00000FFF)<<20)	/* Chip-Select Base Address */
-#define SDRAMC_SDCS_BA(x)		((x)&0xFFF00000)
-#define SDRAMC_SDCS_CSSZ_DISABLE	(0x00000000)
-#define SDRAMC_SDCS_CSSZ_1MBYTE		(0x00000013)
-#define SDRAMC_SDCS_CSSZ_2MBYTE		(0x00000014)
-#define SDRAMC_SDCS_CSSZ_4MBYTE		(0x00000015)
-#define SDRAMC_SDCS_CSSZ_8MBYTE		(0x00000016)
-#define SDRAMC_SDCS_CSSZ_16MBYTE	(0x00000017)
-#define SDRAMC_SDCS_CSSZ_32MBYTE	(0x00000018)
-#define SDRAMC_SDCS_CSSZ_64MBYTE	(0x00000019)
-#define SDRAMC_SDCS_CSSZ_128MBYTE	(0x0000001A)
-#define SDRAMC_SDCS_CSSZ_256MBYTE	(0x0000001B)
-#define SDRAMC_SDCS_CSSZ_512MBYTE	(0x0000001C)
-#define SDRAMC_SDCS_CSSZ_1GBYTE		(0x0000001D)
-#define SDRAMC_SDCS_CSSZ_2GBYTE		(0x0000001E)
-#define SDRAMC_SDCS_CSSZ_4GBYTE		(0x0000001F)
-
-/*********************************************************************
-* Phase Locked Loop (PLL)
-*********************************************************************/
-
-/* Bit definitions and macros for PCR */
-#define PLL_PCR_OUTDIV1(x)		(((x)&0x0000000F))	/* Output divider for CPU clock frequency */
-#define PLL_PCR_OUTDIV2(x)		(((x)&0x0000000F)<<4)	/* Output divider for internal bus clock frequency */
-#define PLL_PCR_OUTDIV3(x)		(((x)&0x0000000F)<<8)	/* Output divider for Flexbus clock frequency */
-#define PLL_PCR_OUTDIV4(x)		(((x)&0x0000000F)<<12)	/* Output divider for PCI clock frequency */
-#define PLL_PCR_OUTDIV5(x)		(((x)&0x0000000F)<<16)	/* Output divider for USB clock frequency */
-#define PLL_PCR_PFDR(x)			(((x)&0x000000FF)<<24)	/* Feedback divider for VCO frequency */
-#define PLL_PCR_PFDR_MASK		(0x000F0000)
-#define PLL_PCR_OUTDIV5_MASK		(0x000F0000)
-#define PLL_PCR_OUTDIV4_MASK		(0x0000F000)
-#define PLL_PCR_OUTDIV3_MASK		(0x00000F00)
-#define PLL_PCR_OUTDIV2_MASK		(0x000000F0)
-#define PLL_PCR_OUTDIV1_MASK		(0x0000000F)
-
-/* Bit definitions and macros for PSR */
-#define PLL_PSR_LOCKS			(0x00000001)	/* PLL lost lock - sticky */
-#define PLL_PSR_LOCK			(0x00000002)	/* PLL lock status */
-#define PLL_PSR_LOLIRQ			(0x00000004)	/* PLL loss-of-lock interrupt enable */
-#define PLL_PSR_LOLRE			(0x00000008)	/* PLL loss-of-lock reset enable */
-
-/*********************************************************************
-* PCI
-*********************************************************************/
-
-/* Bit definitions and macros for SCR */
-#define PCI_SCR_PE			(0x80000000)	/* Parity Error detected */
-#define PCI_SCR_SE			(0x40000000)	/* System error signalled */
-#define PCI_SCR_MA			(0x20000000)	/* Master aboart received */
-#define PCI_SCR_TR			(0x10000000)	/* Target abort received */
-#define PCI_SCR_TS			(0x08000000)	/* Target abort signalled */
-#define PCI_SCR_DT			(0x06000000)	/* PCI_DEVSEL timing */
-#define PCI_SCR_DP			(0x01000000)	/* Master data parity err */
-#define PCI_SCR_FC			(0x00800000)	/* Fast back-to-back */
-#define PCI_SCR_R			(0x00400000)	/* Reserved */
-#define PCI_SCR_66M			(0x00200000)	/* 66Mhz */
-#define PCI_SCR_C			(0x00100000)	/* Capabilities list */
-#define PCI_SCR_F			(0x00000200)	/* Fast back-to-back enable */
-#define PCI_SCR_S			(0x00000100)	/* SERR enable */
-#define PCI_SCR_ST			(0x00000080)	/* Addr and Data stepping */
-#define PCI_SCR_PER			(0x00000040)	/* Parity error response */
-#define PCI_SCR_V			(0x00000020)	/* VGA palette snoop enable */
-#define PCI_SCR_MW			(0x00000010)	/* Memory write and invalidate enable */
-#define PCI_SCR_SP			(0x00000008)	/* Special cycle monitor or ignore */
-#define PCI_SCR_B			(0x00000004)	/* Bus master enable */
-#define PCI_SCR_M			(0x00000002)	/* Memory access control */
-#define PCI_SCR_IO			(0x00000001)	/* I/O access control */
-
-#define PCI_CR1_BIST(x)			((x & 0xFF) << 24)	/* Built in self test */
-#define PCI_CR1_HDR(x)			((x & 0xFF) << 16)	/* Header type */
-#define PCI_CR1_LTMR(x)			((x & 0xF8) << 8)	/* Latency timer */
-#define PCI_CR1_CLS(x)			(x & 0x0F)	/* Cache line size */
-
-#define PCI_BAR_BAR0(x)			(x & 0xFFFC0000)
-#define PCI_BAR_BAR1(x)			(x & 0xFFF00000)
-#define PCI_BAR_BAR2(x)			(x & 0xFFC00000)
-#define PCI_BAR_BAR3(x)			(x & 0xFF000000)
-#define PCI_BAR_BAR4(x)			(x & 0xF8000000)
-#define PCI_BAR_BAR5(x)			(x & 0xE0000000)
-#define PCI_BAR_PREF			(0x00000004)	/* Prefetchable access */
-#define PCI_BAR_RANGE			(0x00000002)	/* Fixed to 00 */
-#define PCI_BAR_IO_M			(0x00000001)	/* IO / memory space */
-
-#define PCI_CR2_MAXLAT(x)		((x & 0xFF) << 24)	/* Maximum latency */
-#define PCI_CR2_MINGNT(x)		((x & 0xFF) << 16)	/* Minimum grant */
-#define PCI_CR2_INTPIN(x)		((x & 0xFF) << 8)	/* Interrupt Pin */
-#define PCI_CR2_INTLIN(x)		(x & 0xFF)	/* Interrupt Line */
-
-#define PCI_GSCR_DRD			(0x80000000)	/* Delayed read discarded */
-#define PCI_GSCR_PE			(0x20000000)	/* PCI_PERR detected */
-#define PCI_GSCR_SE			(0x10000000)	/* SERR detected */
-#define PCI_GSCR_ER			(0x08000000)	/* Error response detected */
-#define PCI_GSCR_DRDE			(0x00008000)	/* Delayed read discarded enable */
-#define PCI_GSCR_PEE			(0x00002000)	/* PERR detected interrupt enable */
-#define PCI_GSCR_SEE			(0x00001000)	/* SERR detected interrupt enable */
-#define PCI_GSCR_PR			(0x00000001)	/* PCI reset */
-
-#define PCI_TCR1_LD			(0x01000000)	/* Latency rule disable */
-#define PCI_TCR1_PID			(0x00020000)	/* Prefetch invalidate and disable */
-#define PCI_TCR1_P			(0x00010000)	/* Prefetch reads */
-#define PCI_TCR1_WCD			(0x00000100)	/* Write combine disable */
-
-#define PCI_TCR2_B5E			(0x00002000)	/*  */
-#define PCI_TCR2_B4E			(0x00001000)	/*  */
-#define PCI_TCR2_B3E			(0x00000800)	/*  */
-#define PCI_TCR2_B2E			(0x00000400)	/*  */
-#define PCI_TCR2_B1E			(0x00000200)	/*  */
-#define PCI_TCR2_B0E			(0x00000100)	/*  */
-#define PCI_TCR2_CR			(0x00000001)	/*  */
-
-#define PCI_TBATR_BAT(x)		((x & 0xFFF) << 20)
-#define PCI_TBATR_EN			(0x00000001)	/* Enable */
-
-#define PCI_IWCR_W0C_IO			(0x08000000)	/* Windows Maps to PCI I/O */
-#define PCI_IWCR_W0C_PRC_RDMUL		(0x04000000)	/* PCI Memory Read multiple */
-#define PCI_IWCR_W0C_PRC_RDLN		(0x02000000)	/* PCI Memory Read line */
-#define PCI_IWCR_W0C_PRC_RD		(0x00000000)	/* PCI Memory Read */
-#define PCI_IWCR_W0C_EN			(0x01000000)	/* Enable - Register initialize */
-#define PCI_IWCR_W1C_IO			(0x00080000)	/* Windows Maps to PCI I/O */
-#define PCI_IWCR_W1C_PRC_RDMUL		(0x00040000)	/* PCI Memory Read multiple */
-#define PCI_IWCR_W1C_PRC_RDLN		(0x00020000)	/* PCI Memory Read line */
-#define PCI_IWCR_W1C_PRC_RD		(0x00000000)	/* PCI Memory Read */
-#define PCI_IWCR_W1C_EN			(0x00010000)	/* Enable - Register initialize */
-#define PCI_IWCR_W2C_IO			(0x00000800)	/* Windows Maps to PCI I/O */
-#define PCI_IWCR_W2C_PRC_RDMUL		(0x00000400)	/* PCI Memory Read multiple */
-#define PCI_IWCR_W2C_PRC_RDLN		(0x00000200)	/* PCI Memory Read line */
-#define PCI_IWCR_W2C_PRC_RD		(0x00000000)	/* PCI Memory Read */
-#define PCI_IWCR_W2C_EN			(0x00000100)	/* Enable - Register initialize */
-
-#define PCI_ICR_REE			(0x04000000)	/* Retry error enable */
-#define PCI_ICR_IAE			(0x02000000)	/* Initiator abort enable */
-#define PCI_ICR_TAE			(0x01000000)	/* Target abort enable */
-#define PCI_ICR_MAXRETRY(x)		((x) & 0x000000FF)
-
-/********************************************************************/
-
-#endif				/* __MCF5445X__ */
diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index 47a7024..891bc00 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -781,7 +781,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 
 	fdt_fixup_memory_banks(blob, base, size, total_memory_banks);
 
-#ifdef CONFIG_USB
+#ifdef CONFIG_USB_HOST
 	fsl_fdt_fixup_dr_usb(blob, bd);
 #endif
 
diff --git a/board/freescale/m52277evb/Kconfig b/board/freescale/m52277evb/Kconfig
deleted file mode 100644
index c427892..0000000
--- a/board/freescale/m52277evb/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_M52277EVB
-
-config SYS_CPU
-	default "mcf5227x"
-
-config SYS_BOARD
-	default "m52277evb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "M52277EVB"
-
-endif
diff --git a/board/freescale/m52277evb/MAINTAINERS b/board/freescale/m52277evb/MAINTAINERS
deleted file mode 100644
index a2a2176..0000000
--- a/board/freescale/m52277evb/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-M52277EVB BOARD
-M:	TsiChung Liew <Tsi-Chung.Liew@nxp.com>
-S:	Maintained
-F:	board/freescale/m52277evb/
-F:	include/configs/M52277EVB.h
-F:	configs/M52277EVB_defconfig
-F:	configs/M52277EVB_stmicro_defconfig
diff --git a/board/freescale/m52277evb/Makefile b/board/freescale/m52277evb/Makefile
deleted file mode 100644
index f98b0c9..0000000
--- a/board/freescale/m52277evb/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y	= m52277evb.o
diff --git a/board/freescale/m52277evb/README b/board/freescale/m52277evb/README
deleted file mode 100644
index 8bfd812..0000000
--- a/board/freescale/m52277evb/README
+++ /dev/null
@@ -1,228 +0,0 @@
-Freescale MCF52277EVB ColdFire Development Board
-================================================
-
-TsiChung Liew(Tsi-Chung.Liew@freescale.com)
-Created Jan 8, 2008
-===========================================
-
-
-Changed files:
-==============
-
-- board/freescale/m52277evb/m52277evb.c	Dram setup
-- board/freescale/m52277evb/Makefile	Makefile
-- board/freescale/m52277evb/config.mk	config make
-- board/freescale/m52277evb/u-boot.lds	Linker description
-
-- arch/m68k/cpu/mcf5227x/cpu.c		cpu specific code
-- arch/m68k/cpu/mcf5227x/cpu_init.c	FBCS, Mux pins, icache and RTC extra regs
-- arch/m68k/cpu/mcf5227x/interrupts.c	cpu specific interrupt support
-- arch/m68k/cpu/mcf5227x/speed.c		system, flexbus, and cpu clock
-- arch/m68k/cpu/mcf5227x/Makefile		Makefile
-- arch/m68k/cpu/mcf5227x/config.mk	config make
-- arch/m68k/cpu/mcf5227x/start.S		start up assembly code
-
-- board/freescale/m52277evb/README	This readme file
-
-- drivers/serial/mcfuart.c	ColdFire common UART driver
-- drivers/rtc/mcfrtc.c		Realtime clock Driver
-
-- include/asm-m68k/bitops.h		Bit operation function export
-- include/asm-m68k/byteorder.h		Byte order functions
-- include/asm-m68k/crossbar.h		CrossBar structure and definition
-- include/asm-m68k/dspi.h		DSPI structure and definition
-- include/asm-m68k/edma.h		eDMA structure and definition
-- include/asm-m68k/flexbus.h		FlexBus structure and definition
-- include/asm-m68k/fsl_i2c.h		I2C structure and definition
-- include/asm-m68k/global_data.h	Global data structure
-- include/asm-m68k/immap.h		ColdFire specific header file and driver macros
-- include/asm-m68k/immap_5227x.h	mcf5227x specific header file
-- include/asm-m68k/io.h			io functions
-- include/asm-m68k/lcd.h		LCD structure and definition
-- include/asm-m68k/m5227x.h		mcf5227x specific header file
-- include/asm-m68k/posix_types.h	Posix
-- include/asm-m68k/processor.h		header file
-- include/asm-m68k/ptrace.h		Exception structure
-- include/asm-m68k/rtc.h		Realtime clock header file
-- include/asm-m68k/ssi.h		SSI structure and definition
-- include/asm-m68k/string.h		String function export
-- include/asm-m68k/timer.h		Timer structure and definition
-- include/asm-m68k/types.h		Data types definition
-- include/asm-m68k/uart.h		Uart structure and definition
-- include/asm-m68k/u-boot.h		U-Boot structure
-
-- include/configs/M52277EVB.h		Board specific configuration file
-
-- arch/m68k/lib/board.c			board init function
-- arch/m68k/lib/cache.c
-- arch/m68k/lib/interrupts			Coldfire common interrupt functions
-- arch/m68k/lib/m68k_linux.c
-- arch/m68k/lib/time.c			Timer functions (Dma timer and PIT)
-- arch/m68k/lib/traps.c			Exception init code
-
-1 MCF52277 specific Options/Settings
-====================================
-1.1 pre-loader is no longer suppoer in this coldfire family
-
-1.2 Configuration settings for M52277EVB Development Board
-CONFIG_MCF5227x		-- define for all MCF5227x CPUs
-CONFIG_M52277		-- define for all Freescale MCF52277 CPUs
-
-CONFIG_MCFUART		-- define to use common CF Uart driver
-CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
-CONFIG_BAUDRATE		-- define UART baudrate
-
-CONFIG_MCFRTC		-- define to use common CF RTC driver
-CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
-CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
-RTC_DEBUG		-- define to show RTC debug message
-CONFIG_CMD_DATE		-- enable to use date feature in U-Boot
-
-CONFIG_MCFTMR		-- define to use DMA timer
-
-CONFIG_SYS_I2C_FSL	-- define to use FSL common I2C driver
-CONFIG_SYS_I2C_SOFT	-- define for I2C bit-banged
-CONFIG_SYS_I2C_SPEED		-- define for I2C speed
-CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
-CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
-CONFIG_SYS_IMMR		-- define for MBAR offset
-
-CONFIG_SYS_MBAR		-- define MBAR offset
-
-CONFIG_MONITOR_IS_IN_RAM -- Not support
-
-CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF52277 internal SRAM
-
-CONFIG_SYS_CSn_BASE	-- defines the Chip Select Base register
-CONFIG_SYS_CSn_MASK	-- defines the Chip Select Mask register
-CONFIG_SYS_CSn_CTRL	-- defines the Chip Select Control register
-
-CONFIG_SYS_SDRAM_BASE	-- defines the DRAM Base
-
-CONFIG_LCD and CONFIG_CMD_USB are not supported in this current U-Boot,
-update will be provided at later time
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. System memory map:
-	Flash:		0x00000000-0x3FFFFFFF (1024MB)
-	DDR:		0x40000000-0x7FFFFFFF (1024MB)
-	SRAM:		0x80000000-0x8FFFFFFF (256MB)
-	IP:		0xF0000000-0xFFFFFFFF (256MB)
-
-2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
-	linux kernel, you can customize it based on your system requirements:
-	Flash0:		0x00000000-0x00FFFFFF (16MB)
-
-	DDR:		0x40000000-0x4FFFFFFF (64MB)
-	SRAM:		0x80000000-0x80007FFF (32KB)
-	IP:		0xFC000000-0xFC0FFFFF (64KB)
-
-3. COMPILATION
-==============
-3.1	To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or
-uClinux version) from codesourcery.com was used. Download it from:
-http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
-
-3.2 Compilation
-   export CROSS_COMPILE=cross-compile-prefix
-   cd u-boot-1.x.x
-   make distclean
-   make M52277EVB_config
-   make
-
-4. SCREEN DUMP
-==============
-4.1 M52277EVB Development board
-    (NOTE: May not show exactly the same)
-
-U-Boot 1.3.1 (Jan 8 2008 - 12:44:08)
-
-CPU:   Freescale MCF52277 (Mask:6c Version:0)
-       CPU CLK 160 Mhz BUS CLK 80 Mhz FLB CLK 80 MHZ
-       INP CLK 16 Mhz VCO CLK 480 Mhz
-Board: Freescale 52277 EVB
-I2C:   ready
-DRAM:  64 MB
-FLASH: 16 MB
-In:    serial
-Out:   serial
-Err:   serial
--> print
-baudrate=115200
-hostname=M52277EVB
-inpclk=16000000
-loadaddr=(0x40000000 + 0x10000)
-load=tftp ${loadaddr) ${u-boot}
-upd=run load; run prog
-prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
-u-boot=u-boot.bin
-stdin=serial
-stdout=serial
-stderr=serial
-mem=65024k
-
-Environment size: 280/32764 bytes
--> bdinfo
-memstart    = 0x40000000
-memsize     = 0x04000000
-flashstart  = 0x00000000
-flashsize   = 0x01000000
-flashoffset = 0x00000000
-sramstart   = 0x80000000
-sramsize    = 0x00008000
-mbar        = 0xFC000000
-busfreq     =     80 MHz
-flbfreq     =     80 Mhz
-inpfreq     =     16 Mhz
-vcofreq     =    480 Mhz
-
-baudrate    = 115200 bps
-->
--> help
-?       - alias for 'help'
-base    - print or set address offset
-bdinfo  - print Board Info structure
-boot    - boot default, i.e., run 'bootcmd'
-bootd   - boot default, i.e., run 'bootcmd'
-bootelf - Boot from an ELF image in memory
-bootm   - boot application image from memory
-bootp	- boot image via network using BootP/TFTP protocol
-bootvx  - Boot vxWorks from an ELF image
-cmp     - memory compare
-coninfo - print console devices and information
-cp      - memory copy
-crc32   - checksum calculation
-date    - get/set/reset date & time
-dcache  - enable or disable data cache
-echo    - echo args to console
-erase   - erase FLASH memory
-flinfo  - print FLASH memory information
-go      - start application at address 'addr'
-help    - print online help
-i2c     - I2C sub-system
-icache  - enable or disable instruction cache
-iminfo  - print header information for application image
-imls    - list all images found in flash
-itest	- return true/false on integer compare
-loadb   - load binary file over serial line (kermit mode)
-loads   - load S-Record file over serial line
-loady   - load binary file over serial line (ymodem mode)
-loop    - infinite loop on address range
-ls	- list files in a directory (default /)
-md      - memory display
-mm      - memory modify (auto-incrementing)
-mtest   - simple RAM test
-mw      - memory write (fill)
-nm      - memory modify (constant address)
-ping	- send ICMP ECHO_REQUEST to network host
-printenv- print environment variables
-protect - enable or disable FLASH write protection
-reset   - Perform RESET of the CPU
-run     - run commands in an environment variable
-saveenv - save environment variables to persistent storage
-setenv  - set environment variables
-sleep   - delay execution for some time
-source  - run script from memory
-version - print monitor version
-->
diff --git a/board/freescale/m52277evb/m52277evb.c b/board/freescale/m52277evb/m52277evb.c
deleted file mode 100644
index 510af33..0000000
--- a/board/freescale/m52277evb/m52277evb.c
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	puts("Board: ");
-	puts("Freescale M52277 EVB\n");
-	return 0;
-};
-
-int dram_init(void)
-{
-	u32 dramsize;
-
-#ifdef CONFIG_CF_SBF
-	/*
-	 * Serial Boot: The dram is already initialized in start.S
-	 * only require to return DRAM size
-	 */
-	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
-#else
-	sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
-	gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
-	u32 i;
-
-	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
-
-	for (i = 0x13; i < 0x20; i++) {
-		if (dramsize == (1 << i))
-			break;
-	}
-	i--;
-
-	out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH);
-
-	out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i);
-
-	out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1);
-	out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2);
-
-	/* Issue PALL */
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
-	__asm__("nop");
-
-	/* Issue LEMR */
-	out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE);
-	__asm__("nop");
-	out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_EMOD);
-	__asm__("nop");
-
-	udelay(1000);
-
-	/* Issue PALL */
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
-	__asm__("nop");
-
-	/* Perform two refresh cycles */
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
-	__asm__("nop");
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
-	__asm__("nop");
-
-	out_be32(&sdram->sdcr,
-		(CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00);
-
-	udelay(100);
-#endif
-	gd->ram_size = dramsize;
-
-	return 0;
-};
-
-int testdram(void)
-{
-	/* TODO: XXX XXX XXX */
-	printf("DRAM test not implemented!\n");
-
-	return (0);
-}
diff --git a/board/freescale/m54418twr/Kconfig b/board/freescale/m54418twr/Kconfig
deleted file mode 100644
index 4199a3f..0000000
--- a/board/freescale/m54418twr/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_M54418TWR
-
-config SYS_CPU
-	default "mcf5445x"
-
-config SYS_BOARD
-	default "m54418twr"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "M54418TWR"
-
-endif
diff --git a/board/freescale/m54418twr/MAINTAINERS b/board/freescale/m54418twr/MAINTAINERS
deleted file mode 100644
index f88aed9..0000000
--- a/board/freescale/m54418twr/MAINTAINERS
+++ /dev/null
@@ -1,11 +0,0 @@
-M54418TWR BOARD
-#M:	-
-S:	Maintained
-F:	board/freescale/m54418twr/
-F:	include/configs/M54418TWR.h
-F:	configs/M54418TWR_defconfig
-F:	configs/M54418TWR_nand_mii_defconfig
-F:	configs/M54418TWR_nand_rmii_defconfig
-F:	configs/M54418TWR_nand_rmii_lowfreq_defconfig
-F:	configs/M54418TWR_serial_mii_defconfig
-F:	configs/M54418TWR_serial_rmii_defconfig
diff --git a/board/freescale/m54418twr/Makefile b/board/freescale/m54418twr/Makefile
deleted file mode 100644
index aa53874..0000000
--- a/board/freescale/m54418twr/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-# Copyright 2010-2012 Freescale Semiconductor, Inc.
-# TsiChung Liew (Tsi-Chung.Liew@freescale.com)
-
-obj-y	= m54418twr.o
-extra-y	+= sbf_dram_init.o
-
diff --git a/board/freescale/m54418twr/m54418twr.c b/board/freescale/m54418twr/m54418twr.c
deleted file mode 100644
index ca89931..0000000
--- a/board/freescale/m54418twr/m54418twr.c
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010-2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#include <common.h>
-#include <init.h>
-#include <spi.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/immap.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	/*
-	 * need to to:
-	 * Check serial flash size. if 2mb evb, else 8mb demo
-	 */
-	puts("Board: ");
-	puts("Freescale MCF54418 Tower System\n");
-	return 0;
-};
-
-int dram_init(void)
-{
-	u32 dramsize;
-
-#if defined(CONFIG_SERIAL_BOOT)
-	/*
-	 * Serial Boot: The dram is already initialized in start.S
-	 * only require to return DRAM size
-	 */
-	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
-#else
-	sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
-	ccm_t *ccm = (ccm_t *)MMAP_CCM;
-	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	pm_t *pm = (pm_t *) MMAP_PM;
-	u32 i;
-
-	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
-
-	for (i = 0x13; i < 0x20; i++) {
-		if (dramsize == (1 << i))
-			break;
-	}
-
-	out_8(&pm->pmcr0, 0x2E);
-	out_8(&gpio->mscr_sdram, 1);
-
-	clrbits_be16(&ccm->misccr2, CCM_MISCCR2_FBHALF);
-	setbits_be16(&ccm->misccr2, CCM_MISCCR2_DDR2CLK);
-
-	out_be32(&sdram->rcrcr, 0x40000000);
-	out_be32(&sdram->padcr, 0x01030203);
-
-	out_be32(&sdram->cr00, 0x01010101);
-	out_be32(&sdram->cr01, 0x00000101);
-	out_be32(&sdram->cr02, 0x01010100);
-	out_be32(&sdram->cr03, 0x01010000);
-	out_be32(&sdram->cr04, 0x00010101);
-	out_be32(&sdram->cr06, 0x00010100);
-	out_be32(&sdram->cr07, 0x00000001);
-	out_be32(&sdram->cr08, 0x01000001);
-	out_be32(&sdram->cr09, 0x00000100);
-	out_be32(&sdram->cr10, 0x00010001);
-	out_be32(&sdram->cr11, 0x00000200);
-	out_be32(&sdram->cr12, 0x01000002);
-	out_be32(&sdram->cr13, 0x00000000);
-	out_be32(&sdram->cr14, 0x00000100);
-	out_be32(&sdram->cr15, 0x02000100);
-	out_be32(&sdram->cr16, 0x02000407);
-	out_be32(&sdram->cr17, 0x02030007);
-	out_be32(&sdram->cr18, 0x02000100);
-	out_be32(&sdram->cr19, 0x0A030203);
-	out_be32(&sdram->cr20, 0x00020708);
-	out_be32(&sdram->cr21, 0x00050008);
-	out_be32(&sdram->cr22, 0x04030002);
-	out_be32(&sdram->cr23, 0x00000004);
-	out_be32(&sdram->cr24, 0x020A0000);
-	out_be32(&sdram->cr25, 0x0C00000E);
-	out_be32(&sdram->cr26, 0x00002004);
-	out_be32(&sdram->cr28, 0x00100010);
-	out_be32(&sdram->cr29, 0x00100010);
-	out_be32(&sdram->cr31, 0x07990000);
-	out_be32(&sdram->cr40, 0x00000000);
-	out_be32(&sdram->cr41, 0x00C80064);
-	out_be32(&sdram->cr42, 0x44520002);
-	out_be32(&sdram->cr43, 0x00C80023);
-	out_be32(&sdram->cr45, 0x0000C350);
-	out_be32(&sdram->cr56, 0x04000000);
-	out_be32(&sdram->cr57, 0x03000304);
-	out_be32(&sdram->cr58, 0x40040000);
-	out_be32(&sdram->cr59, 0xC0004004);
-	out_be32(&sdram->cr60, 0x0642C000);
-	out_be32(&sdram->cr61, 0x00000642);
-	asm("tpf");
-
-	out_be32(&sdram->cr09, 0x01000100);
-
-	udelay(100);
-#endif
-	gd->ram_size = dramsize;
-
-	return 0;
-};
-
-int testdram(void)
-{
-	return 0;
-}
diff --git a/board/freescale/m54418twr/sbf_dram_init.S b/board/freescale/m54418twr/sbf_dram_init.S
deleted file mode 100644
index 5a70fb9..0000000
--- a/board/freescale/m54418twr/sbf_dram_init.S
+++ /dev/null
@@ -1,85 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Board-specific sbf ddr/sdram init.
- *
- * (C) Copyright 2017 Angelo Dureghello <angelo@sysam.it>
- */
-
-.global sbf_dram_init
-.text
-
-sbf_dram_init:
-	move.l	#0xFC04002D, %a1
-	move.b	#46, (%a1)		/* DDR */
-
-	/* slew settings */
-	move.l	#0xEC094060, %a1
-	move.b	#0, (%a1)
-
-	/* use vco instead of cpu*2 clock for ddr clock */
-	move.l	#0xEC09001A, %a1
-	move.w	#0xE01D, (%a1)
-
-	/* DDR settings */
-	move.l	#0xFC0B8180, %a1
-	move.l	#0x00000000, (%a1)
-	move.l	#0x40000000, (%a1)
-
-	move.l	#0xFC0B81AC, %a1
-	move.l	#0x01030203, (%a1)
-
-	move.l	#0xFC0B8000, %a1
-	move.l	#0x01010101, (%a1)+	/* 0x00 */
-	move.l	#0x00000101, (%a1)+	/* 0x04 */
-	move.l	#0x01010100, (%a1)+	/* 0x08 */
-	move.l	#0x01010000, (%a1)+	/* 0x0C */
-	move.l	#0x00010101, (%a1)+	/* 0x10 */
-	move.l	#0xFC0B8018, %a1
-	move.l	#0x00010100, (%a1)+	/* 0x18 */
-	move.l	#0x00000001, (%a1)+	/* 0x1C */
-	move.l	#0x01000001, (%a1)+	/* 0x20 */
-	move.l	#0x00000100, (%a1)+	/* 0x24 */
-	move.l	#0x00010001, (%a1)+	/* 0x28 */
-	move.l	#0x00000200, (%a1)+	/* 0x2C */
-	move.l	#0x01000002, (%a1)+	/* 0x30 */
-	move.l	#0x00000000, (%a1)+	/* 0x34 */
-	move.l	#0x00000100, (%a1)+	/* 0x38 */
-	move.l	#0x02000100, (%a1)+	/* 0x3C */
-	move.l	#0x02000407, (%a1)+	/* 0x40 */
-	move.l	#0x02030007, (%a1)+	/* 0x44 */
-	move.l	#0x02000100, (%a1)+	/* 0x48 */
-	move.l	#0x0A030203, (%a1)+	/* 0x4C */
-	move.l	#0x00020708, (%a1)+	/* 0x50 */
-	move.l	#0x00050008, (%a1)+	/* 0x54 */
-	move.l	#0x04030002, (%a1)+	/* 0x58 */
-	move.l	#0x00000004, (%a1)+	/* 0x5C */
-	move.l	#0x020A0000, (%a1)+	/* 0x60 */
-	move.l	#0x0C00000E, (%a1)+	/* 0x64 */
-	move.l	#0x00002004, (%a1)+	/* 0x68 */
-	move.l	#0x00000000, (%a1)+	/* 0x6C */
-	move.l	#0x00100010, (%a1)+	/* 0x70 */
-	move.l	#0x00100010, (%a1)+	/* 0x74 */
-	move.l	#0x00000000, (%a1)+	/* 0x78 */
-	move.l	#0x07990000, (%a1)+	/* 0x7C */
-	move.l	#0xFC0B80A0, %a1
-	move.l	#0x00000000, (%a1)+	/* 0xA0 */
-	move.l	#0x00C80064, (%a1)+	/* 0xA4 */
-	move.l	#0x44520002, (%a1)+	/* 0xA8 */
-	move.l	#0x00C80023, (%a1)+	/* 0xAC */
-	move.l	#0xFC0B80B4, %a1
-	move.l	#0x0000C350, (%a1)	/* 0xB4 */
-	move.l	#0xFC0B80E0, %a1
-	move.l	#0x04000000, (%a1)+	/* 0xE0 */
-	move.l	#0x03000304, (%a1)+	/* 0xE4 */
-	move.l	#0x40040000, (%a1)+	/* 0xE8 */
-	move.l	#0xC0004004, (%a1)+	/* 0xEC */
-	move.l	#0x0642C000, (%a1)+	/* 0xF0 */
-	move.l	#0x00000642, (%a1)+	/* 0xF4 */
-	move.l	#0xFC0B8024, %a1
-	tpf
-	move.l	#0x01000100, (%a1)	/* 0x24 */
-
-	move.l	#0x2000, %d1
-	bsr	asm_delay
-
-	rts
diff --git a/board/freescale/m54451evb/Kconfig b/board/freescale/m54451evb/Kconfig
deleted file mode 100644
index f460e51..0000000
--- a/board/freescale/m54451evb/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_M54451EVB
-
-config SYS_CPU
-	default "mcf5445x"
-
-config SYS_BOARD
-	default "m54451evb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "M54451EVB"
-
-endif
diff --git a/board/freescale/m54451evb/MAINTAINERS b/board/freescale/m54451evb/MAINTAINERS
deleted file mode 100644
index 52a2681..0000000
--- a/board/freescale/m54451evb/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-M54451EVB BOARD
-#M:	-
-S:	Maintained
-F:	board/freescale/m54451evb/
-F:	include/configs/M54451EVB.h
-F:	configs/M54451EVB_defconfig
-F:	configs/M54451EVB_stmicro_defconfig
diff --git a/board/freescale/m54451evb/Makefile b/board/freescale/m54451evb/Makefile
deleted file mode 100644
index 8c2c6a9..0000000
--- a/board/freescale/m54451evb/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y	= m54451evb.o
-extra-y	+= sbf_dram_init.o
diff --git a/board/freescale/m54451evb/m54451evb.c b/board/freescale/m54451evb/m54451evb.c
deleted file mode 100644
index a4ddc69..0000000
--- a/board/freescale/m54451evb/m54451evb.c
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2008, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#include <common.h>
-#include <init.h>
-#include <spi.h>
-#include <asm/global_data.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	/*
-	 * need to to:
-	 * Check serial flash size. if 2mb evb, else 8mb demo
-	 */
-	puts("Board: ");
-	puts("Freescale M54451 EVB\n");
-	return 0;
-};
-
-int dram_init(void)
-{
-	u32 dramsize;
-#ifdef CONFIG_CF_SBF
-	/*
-	 * Serial Boot: The dram is already initialized in start.S
-	 * only require to return DRAM size
-	 */
-	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
-#else
-	sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
-	gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
-	u32 i;
-
-	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
-
-	if ((in_be32(&sdram->sdcfg1) == CONFIG_SYS_SDRAM_CFG1) &&
-	    (in_be32(&sdram->sdcfg2) == CONFIG_SYS_SDRAM_CFG2))
-		return dramsize;
-
-	for (i = 0x13; i < 0x20; i++) {
-		if (dramsize == (1 << i))
-			break;
-	}
-	i--;
-
-	out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH);
-
-	out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i);
-
-	out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1);
-	out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2);
-
-	udelay(200);
-
-	/* Issue PALL */
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
-	__asm__("nop");
-
-	/* Perform two refresh cycles */
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
-	__asm__("nop");
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
-	__asm__("nop");
-
-	/* Issue LEMR */
-	out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE);
-	__asm__("nop");
-	out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE);
-	__asm__("nop");
-
-	out_be32(&sdram->sdcr,
-		(CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000000);
-
-	udelay(100);
-#endif
-	gd->ram_size = dramsize;
-
-	return 0;
-};
-
-int testdram(void)
-{
-	/* TODO: XXX XXX XXX */
-	printf("DRAM test not implemented!\n");
-
-	return (0);
-}
diff --git a/board/freescale/m54451evb/sbf_dram_init.S b/board/freescale/m54451evb/sbf_dram_init.S
deleted file mode 100644
index ee08cd1..0000000
--- a/board/freescale/m54451evb/sbf_dram_init.S
+++ /dev/null
@@ -1,96 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Board-specific sbf ddr/sdram init.
- *
- * (C) Copyright 2017 Angelo Dureghello <angelo@sysam.it>
- */
-
- #include <config.h>
-
-.global sbf_dram_init
-.text
-
-sbf_dram_init:
-	/* Dram Initialization a1, a2, and d0 */
-	/* mscr sdram */
-	move.l	#0xFC0A4074, %a1
-	move.b	#(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
-	nop
-
-	/* SDRAM Chip 0 and 1 */
-	move.l	#0xFC0B8110, %a1
-	move.l	#0xFC0B8114, %a2
-
-	/* calculate the size */
-	move.l	#0x13, %d1
-	move.l	#(CONFIG_SYS_SDRAM_SIZE), %d2
-#ifdef CONFIG_SYS_SDRAM_BASE1
-	lsr.l	#1, %d2
-#endif
-
-dramsz_loop:
-	lsr.l	#1, %d2
-	add.l	#1, %d1
-	cmp.l	#1, %d2
-	bne	dramsz_loop
-#ifdef CONFIG_SYS_NAND_BOOT
-	beq	asm_nand_chk_status
-#endif
-	/* SDRAM Chip 0 and 1 */
-	move.l	#(CONFIG_SYS_SDRAM_BASE), (%a1)
-	or.l	%d1, (%a1)
-#ifdef CONFIG_SYS_SDRAM_BASE1
-	move.l	#(CONFIG_SYS_SDRAM_BASE1), (%a2)
-	or.l	%d1, (%a2)
-#endif
-	nop
-
-	/* dram cfg1 and cfg2 */
-	move.l	#0xFC0B8008, %a1
-	move.l	#(CONFIG_SYS_SDRAM_CFG1), (%a1)
-	nop
-	move.l	#0xFC0B800C, %a2
-	move.l	#(CONFIG_SYS_SDRAM_CFG2), (%a2)
-	nop
-
-	move.l	#0xFC0B8000, %a1	/* Mode */
-	move.l	#0xFC0B8004, %a2	/* Ctrl */
-
-	/* Issue PALL */
-	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
-	nop
-
-	move.l	#1000, %d1
-	bsr	asm_delay
-
-	/* Issue PALL */
-	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
-	nop
-
-	/* Perform two refresh cycles */
-	move.l	#(CONFIG_SYS_SDRAM_CTRL + 4), %d0
-	nop
-	move.l	%d0, (%a2)
-	move.l	%d0, (%a2)
-	nop
-
-	/* Issue LEMR */
-	move.l	#(CONFIG_SYS_SDRAM_MODE), (%a1)
-	nop
-	move.l	#(CONFIG_SYS_SDRAM_EMOD), (%a1)
-
-	move.l	#500, %d1
-	bsr	asm_delay
-
-	move.l	#(CONFIG_SYS_SDRAM_CTRL), %d1
-	and.l	#0x7FFFFFFF, %d1
-
-	or.l	#0x10000C00, %d1
-
-	move.l	%d1, (%a2)
-	nop
-
-	move.l	#2000, %d1
-	bsr	asm_delay
-
-	rts
diff --git a/board/freescale/m54455evb/Kconfig b/board/freescale/m54455evb/Kconfig
deleted file mode 100644
index 096bce8..0000000
--- a/board/freescale/m54455evb/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_M54455EVB
-
-config SYS_CPU
-	default "mcf5445x"
-
-config SYS_BOARD
-	default "m54455evb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "M54455EVB"
-
-endif
diff --git a/board/freescale/m54455evb/MAINTAINERS b/board/freescale/m54455evb/MAINTAINERS
deleted file mode 100644
index 27ced3c..0000000
--- a/board/freescale/m54455evb/MAINTAINERS
+++ /dev/null
@@ -1,10 +0,0 @@
-M54455EVB BOARD
-M:	TsiChung Liew <Tsi-Chung.Liew@nxp.com>
-S:	Maintained
-F:	board/freescale/m54455evb/
-F:	include/configs/M54455EVB.h
-F:	configs/M54455EVB_defconfig
-F:	configs/M54455EVB_a66_defconfig
-F:	configs/M54455EVB_i66_defconfig
-F:	configs/M54455EVB_intel_defconfig
-F:	configs/M54455EVB_stm33_defconfig
diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile
deleted file mode 100644
index eff8ab0..0000000
--- a/board/freescale/m54455evb/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y	= m54455evb.o
-extra-y	+= sbf_dram_init.o
diff --git a/board/freescale/m54455evb/README b/board/freescale/m54455evb/README
deleted file mode 100644
index 26d3cc8..0000000
--- a/board/freescale/m54455evb/README
+++ /dev/null
@@ -1,407 +0,0 @@
-Freescale MCF54455EVB ColdFire Development Board
-================================================
-
-TsiChung Liew(Tsi-Chung.Liew@freescale.com)
-Created 4/08/07
-===========================================
-
-
-Changed files:
-==============
-
-- board/freescale/m54455evb/m54455evb.c	Dram setup, IDE pre init, and PCI init
-- board/freescale/m54455evb/flash.c		Atmel and INTEL flash support
-- board/freescale/m54455evb/Makefile		Makefile
-- board/freescale/m54455evb/config.mk	config make
-- board/freescale/m54455evb/u-boot.lds	Linker description
-
-- common/cmd_bdinfo.c		Clock frequencies output
-- common/cmd_mii.c		mii support
-
-- arch/m68k/cpu/mcf5445x/cpu.c		cpu specific code
-- arch/m68k/cpu/mcf5445x/cpu_init.c	Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
-- arch/m68k/cpu/mcf5445x/interrupts.c	cpu specific interrupt support
-- arch/m68k/cpu/mcf5445x/speed.c		system, pci, flexbus, and cpu clock
-- arch/m68k/cpu/mcf5445x/Makefile		Makefile
-- arch/m68k/cpu/mcf5445x/config.mk	config make
-- arch/m68k/cpu/mcf5445x/start.S		start up assembly code
-
-- board/freescale/m54455evb/README	This readme file
-
-- drivers/net/mcffec.c		ColdFire common FEC driver
-- drivers/serial/mcfuart.c	ColdFire common UART driver
-
-- include/asm-m68k/bitops.h		Bit operation function export
-- include/asm-m68k/byteorder.h		Byte order functions
-- include/asm-m68k/fec.h		FEC structure and definition
-- include/asm-m68k/fsl_i2c.h		I2C structure and definition
-- include/asm-m68k/global_data.h	Global data structure
-- include/asm-m68k/immap.h		ColdFire specific header file and driver macros
-- include/asm-m68k/immap_5445x.h	mcf5445x specific header file
-- include/asm-m68k/io.h			io functions
-- include/asm-m68k/m5445x.h		mcf5445x specific header file
-- include/asm-m68k/posix_types.h	Posix
-- include/asm-m68k/processor.h		header file
-- include/asm-m68k/ptrace.h		Exception structure
-- include/asm-m68k/rtc.h		Realtime clock header file
-- include/asm-m68k/string.h		String function export
-- include/asm-m68k/timer.h		Timer structure and definition
-- include/asm-m68k/types.h		Data types definition
-- include/asm-m68k/uart.h		Uart structure and definition
-- include/asm-m68k/u-boot.h		U-Boot structure
-
-- include/configs/M54455EVB.h	Board specific configuration file
-
-- arch/m68k/lib/board.c			board init function
-- arch/m68k/lib/cache.c
-- arch/m68k/lib/interrupts			Coldfire common interrupt functions
-- arch/m68k/lib/m68k_linux.c
-- arch/m68k/lib/time.c			Timer functions (Dma timer and PIT)
-- arch/m68k/lib/traps.c			Exception init code
-
-- rtc/mcfrtc.c				Realtime clock Driver
-
-1 MCF5445x specific Options/Settings
-====================================
-1.1 pre-loader is no longer suppoer in thie coldfire family
-
-1.2 Configuration settings for M54455EVB Development Board
-CONFIG_MCF5445x		-- define for all MCF5445x CPUs
-CONFIG_M54455		-- define for all Freescale MCF54455 CPUs
-CONFIG_M54455EVB	-- define for M54455EVB board
-
-CONFIG_MCFUART		-- define to use common CF Uart driver
-CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
-CONFIG_BAUDRATE		-- define UART baudrate
-
-CONFIG_MCFRTC		-- define to use common CF RTC driver
-CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
-CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
-RTC_DEBUG		-- define to show RTC debug message
-CONFIG_CMD_DATE		-- enable to use date feature in U-Boot
-
-CONFIG_MCFFEC		-- define to use common CF FEC driver
-CONFIG_MII		-- enable to use MII driver
-CONFIG_CF_DOMII		-- enable to use MII feature in cmd_mii.c
-CONFIG_SYS_DISCOVER_PHY	-- enable PHY discovery
-CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
-CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
-CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
-CONFIG_SYS_FEC1_PINMUX		-- Set FEC1 Pin configuration
-CONFIG_SYS_FEC0_MIIBASE	-- Set FEC0 MII base register
-CONFIG_SYS_FEC1_MIIBASE	-- Set FEC0 MII base register
-MCFFEC_TOUT_LOOP	-- set FEC timeout loop
-CONFIG_HAS_ETH1		-- define to enable second FEC in U-Boot
-
-CONFIG_ISO_PARTITION	-- enable ISO read/write
-CONFIG_DOS_PARTITION	-- enable DOS read/write
-CONFIG_IDE_RESET	-- define ide_reset()
-CONFIG_IDE_PREINIT	-- define ide_preinit()
-CONFIG_ATAPI		-- define ATAPI support
-CONFIG_LBA48		-- define LBA48 (larger than 120GB) support
-CONFIG_SYS_IDE_MAXBUS		-- define max channel
-CONFIG_SYS_IDE_MAXDEVICE	-- define max devices per channel
-CONFIG_SYS_ATA_BASE_ADDR	-- define ATA base address
-CONFIG_SYS_ATA_IDE0_OFFSET	-- define ATA IDE0 offset
-CONFIG_SYS_ATA_DATA_OFFSET	-- define ATA data IO
-CONFIG_SYS_ATA_REG_OFFSET	-- define for normal register accesses
-CONFIG_SYS_ATA_ALT_OFFSET	-- define for alternate registers
-CONFIG_SYS_ATA_STRIDE		-- define for Interval between registers
-_IO_BASE		-- define for IO base address
-
-CONFIG_MCFTMR		-- define to use DMA timer
-
-CONFIG_SYS_FSL_I2C	-- define to use FSL common I2C driver
-CONFIG_SYS_I2C_SOFT	-- define for I2C bit-banged
-CONFIG_SYS_I2C_SPEED		-- define for I2C speed
-CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
-CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
-CONFIG_SYS_IMMR		-- define for MBAR offset
-
-CONFIG_PCI              -- define for PCI support
-CONFIG_PCI_PNP          -- define for Plug n play support
-CONFIG_SYS_PCI_MEM_BUS		-- PCI memory logical offset
-CONFIG_SYS_PCI_MEM_PHYS	-- PCI memory physical offset
-CONFIG_SYS_PCI_MEM_SIZE	-- PCI memory size
-CONFIG_SYS_PCI_IO_BUS		-- PCI IO logical offset
-CONFIG_SYS_PCI_IO_PHYS		-- PCI IO physical offset
-CONFIG_SYS_PCI_IO_SIZE		-- PCI IO size
-CONFIG_SYS_PCI_CFG_BUS		-- PCI Configuration logical offset
-CONFIG_SYS_PCI_CFG_PHYS	-- PCI Configuration physical offset
-CONFIG_SYS_PCI_CFG_SIZE	-- PCI Configuration size
-
-CONFIG_EXTRA_CLOCK	-- Enable extra clock such as vco, flexbus, pci, etc
-
-CONFIG_SYS_MBAR		-- define MBAR offset
-
-CONFIG_SYS_ATMEL_BOOT		-- To determine the U-Boot is booted from Atmel or Intel
-
-CONFIG_MONITOR_IS_IN_RAM -- Not support
-
-CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF54455 internal SRAM
-
-CONFIG_SYS_CSn_BASE	-- defines the Chip Select Base register
-CONFIG_SYS_CSn_MASK	-- defines the Chip Select Mask register
-CONFIG_SYS_CSn_CTRL	-- defines the Chip Select Control register
-
-CONFIG_SYS_ATMEL_BASE	-- defines the Atmel Flash base
-CONFIG_SYS_INTEL_BASE	-- defines the Intel Flash base
-
-CONFIG_SYS_SDRAM_BASE	-- defines the DRAM Base
-CONFIG_SYS_SDRAM_BASE1	-- defines the DRAM Base 1
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. System memory map:
-	Flash:		0x00000000-0x3FFFFFFF (1024MB)
-	DDR:		0x40000000-0x7FFFFFFF (1024MB)
-	SRAM:		0x80000000-0x8FFFFFFF (256MB)
-	ATA:		0x90000000-0x9FFFFFFF (256MB)
-	PCI:		0xA0000000-0xBFFFFFFF (512MB)
-	FlexBus:	0xC0000000-0xDFFFFFFF (512MB)
-	IP:		0xF0000000-0xFFFFFFFF (256MB)
-
-2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
-	linux kernel, you can customize it based on your system requirements:
-	Atmel boot:
-	Flash0:		0x00000000-0x0007FFFF (512KB)
-	Flash1:		0x04000000-0x05FFFFFF (32MB)
-	Intel boot:
-	Flash0:		0x00000000-0x01FFFFFF (32MB)
-	Flash1:		0x04000000-0x0407FFFF (512KB)
-
-	CPLD:		0x08000000-0x08FFFFFF (16MB)
-	FPGA:		0x09000000-0x09FFFFFF (16MB)
-	DDR:		0x40000000-0x4FFFFFFF (256MB)
-	SRAM:		0x80000000-0x80007FFF (32KB)
-	IP:		0xFC000000-0xFC0FFFFF (64KB)
-
-3. SWITCH SETTINGS
-==================
-3.1 SW1 Pin3: 0 - Boot from Atmel or 1 - INTEL
-	SW1 Pin4: 0 - ULPI chip not in reset state or 1 - ULPI chip in reset state
-	SW1 Pin5: 0 - Full ATA Bus enabled, FEC Phy1 powered down
-			  1 - Upper 8 bits ATA data bus disabled, FEC PHY1 active
-	SW1 Pin6: 0 - FEC Phy0 active or 1 - FEC Phy0 powered down
-	SW1 Pin3: 0 - Boot from Atmel or 1 - INTEL
-
-4. COMPILATION
-==============
-4.1	To create U-Boot the gcc-4.1-32 compiler set (ColdFire ELF version)
-from codesourcery.com was used. Download it from:
-http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
-
-4.2 Compilation
-   export CROSS_COMPILE=cross-compile-prefix
-   cd u-boot-1.x.x
-   make distclean
-   make M54455EVB_config, or		- default to atmel 33Mhz input clock
-   make M54455EVB_atmel_config, or	- default to atmel 33Mhz input clock
-   make M54455EVB_a33_config, or	- default to atmel 33Mhz input clock
-   make M54455EVB_a66_config, or	- default to atmel 66Mhz input clock
-   make M54455EVB_intel_config, or	- default to intel 33Mhz input clock
-   make M54455EVB_i33_config, or	- default to intel 33Mhz input clock
-   make M54455EVB_i66_config, or	- default to intel 66Mhz input clock
-   make
-
-5. SCREEN DUMP
-==============
-5.1 M54455EVB Development board
-    Boot from Atmel (NOTE: May not show exactly the same)
-
-U-Boot 1.2.0-g98c80b46-dirty (Jul 26 2007 - 12:44:08)
-
-CPU:   Freescale MCF54455 (Mask:48 Version:1)
-       CPU CLK 266 Mhz BUS CLK 133 Mhz FLB CLK 66 Mhz
-       PCI CLK 33 Mhz INP CLK 33 Mhz VCO CLK 533 Mhz
-Board: Freescale M54455 EVB
-I2C:   ready
-DRAM:  256 MB
-FLASH: 16.5 MB
-In:    serial
-Out:   serial
-Err:   serial
-Net:   FEC0, FEC1
-IDE:   Bus 0: not available
--> print
-bootargs=root=/dev/ram rw
-bootdelay=1
-baudrate=115200
-ethaddr=00:e0:0c:bc:e5:60
-eth1addr=00:e0:0c:bc:e5:61
-hostname=M54455EVB
-netdev=eth0
-inpclk=33333333
-loadaddr=40010000
-load=tftp ${loadaddr) ${u-boot}
-upd=run load; run prog
-prog=prot off 0 2ffff;era 0 2ffff;cp.b ${loadaddr} 0 ${filesize};save
-ethact=FEC0
-mtdids=nor0=M54455EVB-1
-mtdparts=M54455EVB-1:16m(user)
-u-boot=u-boot54455.bin
-filesize=292b4
-fileaddr=40010000
-gatewayip=192.168.1.1
-netmask=255.255.255.0
-ipaddr=192.168.1.3
-serverip=192.168.1.2
-stdin=serial
-stdout=serial
-stderr=serial
-mem=261632k
-
-Environment size: 563/8188 bytes
--> bdinfo
-memstart    = 0x40000000
-memsize     = 0x10000000
-flashstart  = 0x00000000
-flashsize   = 0x01080000
-flashoffset = 0x00000000
-sramstart   = 0x80000000
-sramsize    = 0x00008000
-mbar        = 0xFC000000
-busfreq     = 133.333 MHz
-pcifreq     = 33.333 MHz
-flbfreq     = 66.666 MHz
-inpfreq     = 33.333 MHz
-vcofreq     = 533.333 MHz
-ethaddr     = 00:E0:0C:BC:E5:60
-eth1addr    = 00:E0:0C:BC:E5:61
-ip_addr     = 192.168.1.3
-baudrate    = 115200 bps
-->
--> help
-?       - alias for 'help'
-base    - print or set address offset
-bdinfo  - print Board Info structure
-boot    - boot default, i.e., run 'bootcmd'
-bootd   - boot default, i.e., run 'bootcmd'
-bootelf - Boot from an ELF image in memory
-bootm   - boot application image from memory
-bootp	- boot image via network using BootP/TFTP protocol
-bootvx  - Boot vxWorks from an ELF image
-cmp     - memory compare
-coninfo - print console devices and information
-cp      - memory copy
-crc32   - checksum calculation
-date    - get/set/reset date & time
-dcache  - enable or disable data cache
-diskboot- boot from IDE device
-echo    - echo args to console
-erase   - erase FLASH memory
-ext2load- load binary file from a Ext2 filesystem
-ext2ls  - list files in a directory (default /)
-fatinfo - print information about filesystem
-fatload - load binary file from a dos filesystem
-fatls   - list files in a directory (default /)
-flinfo  - print FLASH memory information
-fsinfo	- print information about filesystems
-fsload	- load binary file from a filesystem image
-go      - start application at address 'addr'
-help    - print online help
-i2c     - I2C sub-system
-icache  - enable or disable instruction cache
-ide     - IDE sub-system
-iminfo  - print header information for application image
-imls    - list all images found in flash
-itest	- return true/false on integer compare
-loadb   - load binary file over serial line (kermit mode)
-loads   - load S-Record file over serial line
-loady   - load binary file over serial line (ymodem mode)
-loop    - infinite loop on address range
-ls	- list files in a directory (default /)
-md      - memory display
-mii     - MII utility commands
-mm      - memory modify (auto-incrementing)
-mtest   - simple RAM test
-mw      - memory write (fill)
-nfs	- boot image via network using NFS protocol
-nm      - memory modify (constant address)
-pci     - list and access PCI Configuration Space
-ping	- send ICMP ECHO_REQUEST to network host
-printenv- print environment variables
-protect - enable or disable FLASH write protection
-rarpboot- boot image via network using RARP/TFTP protocol
-reset   - Perform RESET of the CPU
-run     - run commands in an environment variable
-saveenv - save environment variables to persistent storage
-setenv  - set environment variables
-sleep   - delay execution for some time
-source  - run script from memory
-tftpboot- boot image via network using TFTP protocol
-version - print monitor version
-->bootm 4000000
-
-## Booting image at 04000000 ...
-   Image Name:   Linux Kernel Image
-   Created:      2007-08-14  15:13:00 UTC
-   Image Type:   M68K Linux Kernel Image (uncompressed)
-   Data Size:    2301952 Bytes =  2.2 MB
-   Load Address: 40020000
-   Entry Point:  40020000
-   Verifying Checksum ... OK
-OK
-Linux version 2.6.20-gfe5136d6-dirty (mattw@kea) (gcc version 4.2.0 20070318 (pr
-erelease) (Sourcery G++ Lite 4.2-20)) #108 Mon Aug 13 13:00:13 MDT 2007
-starting up linux startmem 0xc0254000, endmem 0xcfffffff, size 253MB
-Built 1 zonelists.  Total pages: 32624
-Kernel command line: root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=ph
-ysmap-flash.0:5M(kernel)ro,-(jffs2)
-PID hash table entries: 1024 (order: 10, 4096 bytes)
-Console: colour dummy device 80x25
-Dentry cache hash table entries: 32768 (order: 4, 131072 bytes)
-Inode-cache hash table entries: 16384 (order: 3, 65536 bytes)
-Memory: 257496k/262136k available (1864k kernel code, 2440k data, 88k init)
-Mount-cache hash table entries: 1024
-NET: Registered protocol family 16
-SCSI subsystem initialized
-NET: Registered protocol family 2
-IP route cache hash table entries: 2048 (order: 0, 8192 bytes)
-TCP established hash table entries: 8192 (order: 2, 32768 bytes)
-TCP bind hash table entries: 4096 (order: 1, 16384 bytes)
-TCP: Hash tables configured (established 8192 bind 4096)
-TCP reno registered
-JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
-io scheduler noop registered
-io scheduler anticipatory registered
-io scheduler deadline registered
-io scheduler cfq registered (default)
-ColdFire internal UART serial driver version 1.00
-ttyS0 at 0xfc060000 (irq = 90) is a builtin ColdFire UART
-ttyS1 at 0xfc064000 (irq = 91) is a builtin ColdFire UART
-ttyS2 at 0xfc068000 (irq = 92) is a builtin ColdFire UART
-RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
-loop: loaded (max 8 devices)
-FEC ENET Version 0.2
-fec: PHY @ 0x0, ID 0x20005ca2 -- DP83849
-eth0: ethernet 00:08:ee:00:e4:19
-physmap platform flash device: 01000000 at 04000000
-physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
- Intel/Sharp Extended Query Table at 0x0031
-Using buffer write method
-cfi_cmdset_0001: Erase suspend on write enabled
-2 cmdlinepart partitions found on MTD device physmap-flash.0
-Creating 2 MTD partitions on "physmap-flash.0":
-0x00000000-0x00500000 : "kernel"
-mtd: Giving out device 0 to kernel
-0x00500000-0x01000000 : "jffs2"
-mtd: Giving out device 1 to jffs2
-mice: PS/2 mouse device common for all mice
-i2c /dev entries driver
-TCP cubic registered
-NET: Registered protocol family 1
-NET: Registered protocol family 17
-NET: Registered protocol family 15
-VFS: Mounted root (jffs2 filesystem).
-Setting the hostname to freescale
-Mounting filesystems
-mount: Mounting usbfs on /proc/bus/usb failed: No such file or directory
-Starting syslogd and klogd
-Setting up networking on loopback device:
-Setting up networking on eth0:
-eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
-Adding static route for default gateway to 172.27.255.254:
-Setting nameserver to 172.27.0.1 in /etc/resolv.conf:
-Starting inetd:
-/ #
diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c
deleted file mode 100644
index c749ee4..0000000
--- a/board/freescale/m54455evb/m54455evb.c
+++ /dev/null
@@ -1,217 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#include <common.h>
-#include <init.h>
-#include <pci.h>
-#include <asm/global_data.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	puts("Board: ");
-	puts("Freescale M54455 EVB\n");
-	return 0;
-};
-
-int dram_init(void)
-{
-	u32 dramsize;
-#ifdef CONFIG_CF_SBF
-	/*
-	 * Serial Boot: The dram is already initialized in start.S
-	 * only require to return DRAM size
-	 */
-	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
-#else
-	sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
-	gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
-	u32 i;
-
-	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
-
-	for (i = 0x13; i < 0x20; i++) {
-		if (dramsize == (1 << i))
-			break;
-	}
-	i--;
-
-	out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH);
-
-	out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i);
-	out_be32(&sdram->sdcs1, CONFIG_SYS_SDRAM_BASE1 | i);
-
-	out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1);
-	out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2);
-
-	/* Issue PALL */
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
-
-	/* Issue LEMR */
-	out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_EMOD | 0x408);
-	out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE | 0x300);
-
-	udelay(500);
-
-	/* Issue PALL */
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
-
-	/* Perform two refresh cycles */
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
-
-	out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE | 0x200);
-
-	out_be32(&sdram->sdcr,
-		(CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00);
-
-	udelay(100);
-#endif
-	gd->ram_size = dramsize << 1;
-
-	return 0;
-};
-
-int testdram(void)
-{
-	/* TODO: XXX XXX XXX */
-	printf("DRAM test not implemented!\n");
-
-	return (0);
-}
-
-#if defined(CONFIG_IDE)
-#include <ata.h>
-
-int ide_preinit(void)
-{
-	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	u32 tmp;
-
-	tmp = (in_8(&gpio->par_fec) & GPIO_PAR_FEC_FEC1_UNMASK) | 0x10;
-	setbits_8(&gpio->par_fec, tmp);
-	tmp = ((in_be16(&gpio->par_feci2c) & 0xf0ff) |
-		(GPIO_PAR_FECI2C_MDC1_ATA_DIOR | GPIO_PAR_FECI2C_MDIO1_ATA_DIOW));
-	setbits_be16(&gpio->par_feci2c, tmp);
-
-	setbits_be16(&gpio->par_ata,
-		GPIO_PAR_ATA_BUFEN | GPIO_PAR_ATA_CS1 | GPIO_PAR_ATA_CS0 |
-		GPIO_PAR_ATA_DA2 | GPIO_PAR_ATA_DA1 | GPIO_PAR_ATA_DA0 |
-		GPIO_PAR_ATA_RESET_RESET | GPIO_PAR_ATA_DMARQ_DMARQ |
-		GPIO_PAR_ATA_IORDY_IORDY);
-	setbits_be16(&gpio->par_pci,
-		GPIO_PAR_PCI_GNT3_ATA_DMACK | GPIO_PAR_PCI_REQ3_ATA_INTRQ);
-
-	return (0);
-}
-
-void ide_set_reset(int idereset)
-{
-	atac_t *ata = (atac_t *) MMAP_ATA;
-	long period;
-	/*  t1,  t2,  t3,  t4,  t5,  t6,  t9, tRD,  tA */
-	int piotms[5][9] = {
-		{70, 165, 60, 30, 50, 5, 20, 0, 35},	/* PIO 0 */
-		{50, 125, 45, 20, 35, 5, 15, 0, 35},	/* PIO 1 */
-		{30, 100, 30, 15, 20, 5, 10, 0, 35},	/* PIO 2 */
-		{30, 80, 30, 10, 20, 5, 10, 0, 35},	/* PIO 3 */
-		{25, 70, 20, 10, 20, 5, 10, 0, 35}
-	};			/* PIO 4 */
-
-	if (idereset) {
-		/* control reset */
-		out_8(&ata->cr, 0);
-		udelay(10000);
-	} else {
-#define CALC_TIMING(t) (t + period - 1) / period
-		period = 1000000000 / gd->bus_clk;	/* period in ns */
-
-		/*ata->ton = CALC_TIMING (180); */
-		out_8(&ata->t1, CALC_TIMING(piotms[2][0]));
-		out_8(&ata->t2w, CALC_TIMING(piotms[2][1]));
-		out_8(&ata->t2r, CALC_TIMING(piotms[2][1]));
-		out_8(&ata->ta, CALC_TIMING(piotms[2][8]));
-		out_8(&ata->trd, CALC_TIMING(piotms[2][7]));
-		out_8(&ata->t4, CALC_TIMING(piotms[2][3]));
-		out_8(&ata->t9, CALC_TIMING(piotms[2][6]));
-
-		/* IORDY enable */
-		out_8(&ata->cr, 0x40);
-		udelay(200000);
-		/* IORDY enable */
-		setbits_8(&ata->cr, 0x01);
-	}
-}
-#endif
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI devices, report devices found.
- */
-static struct pci_controller hose;
-extern void pci_mcf5445x_init(struct pci_controller *hose);
-
-void pci_init_board(void)
-{
-	pci_mcf5445x_init(&hose);
-}
-#endif				/* CONFIG_PCI */
-
-#if defined(CONFIG_FLASH_CFI_LEGACY)
-#include <flash.h>
-ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
-{
-	int sect[] = CONFIG_SYS_ATMEL_SECT;
-	int sectsz[] = CONFIG_SYS_ATMEL_SECTSZ;
-	int i, j, k;
-
-	if (base != CONFIG_SYS_ATMEL_BASE)
-		return 0;
-
-	info->flash_id          = 0x01000000;
-	info->portwidth         = 1;
-	info->chipwidth         = 1;
-	info->buffer_size       = 1;
-	info->erase_blk_tout    = 16384;
-	info->write_tout        = 2;
-	info->buffer_write_tout = 5;
-	info->vendor            = 0xFFF0; /* CFI_CMDSET_AMD_LEGACY */
-	info->cmd_reset         = 0x00F0;
-	info->interface         = FLASH_CFI_X8;
-	info->legacy_unlock     = 0;
-	info->manufacturer_id   = (u16) ATM_MANUFACT;
-	info->device_id         = ATM_ID_LV040;
-	info->device_id2        = 0;
-
-	info->ext_addr          = 0;
-	info->cfi_version       = 0x3133;
-	info->cfi_offset        = 0x0000;
-	info->addr_unlock1      = 0x00000555;
-	info->addr_unlock2      = 0x000002AA;
-	info->name              = "CFI conformant";
-
-	info->size              = 0;
-	info->sector_count      = CONFIG_SYS_ATMEL_TOTALSECT;
-	info->start[0] = base;
-	for (k = 0, i = 0; i < CONFIG_SYS_ATMEL_REGION; i++) {
-		info->size += sect[i] * sectsz[i];
-
-		for (j = 0; j < sect[i]; j++, k++) {
-			info->start[k + 1] = info->start[k] + sectsz[i];
-			info->protect[k] = 0;
-		}
-	}
-
-	return 1;
-}
-#endif				/* CONFIG_SYS_FLASH_CFI */
diff --git a/board/freescale/m54455evb/sbf_dram_init.S b/board/freescale/m54455evb/sbf_dram_init.S
deleted file mode 100644
index fe5bb05..0000000
--- a/board/freescale/m54455evb/sbf_dram_init.S
+++ /dev/null
@@ -1,100 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Board-specific sbf ddr/sdram init.
- *
- * (C) Copyright 2017 Angelo Dureghello <angelo@sysam.it>
- */
-
- #include <config.h>
-
-.global sbf_dram_init
-.text
-
-sbf_dram_init:
-	/* Dram Initialization a1, a2, and d0 */
-	/* mscr sdram */
-	move.l	#0xFC0A4074, %a1
-	move.b	#(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
-	nop
-
-	/* SDRAM Chip 0 and 1 */
-	move.l	#0xFC0B8110, %a1
-	move.l	#0xFC0B8114, %a2
-
-	/* calculate the size */
-	move.l	#0x13, %d1
-	move.l	#(CONFIG_SYS_SDRAM_SIZE), %d2
-#ifdef CONFIG_SYS_SDRAM_BASE1
-	lsr.l	#1, %d2
-#endif
-
-dramsz_loop:
-	lsr.l	#1, %d2
-	add.l	#1, %d1
-	cmp.l	#1, %d2
-	bne	dramsz_loop
-#ifdef CONFIG_SYS_NAND_BOOT
-	beq	asm_nand_chk_status
-#endif
-	/* SDRAM Chip 0 and 1 */
-	move.l	#(CONFIG_SYS_SDRAM_BASE), (%a1)
-	or.l	%d1, (%a1)
-#ifdef CONFIG_SYS_SDRAM_BASE1
-	move.l	#(CONFIG_SYS_SDRAM_BASE1), (%a2)
-	or.l	%d1, (%a2)
-#endif
-	nop
-
-	/* dram cfg1 and cfg2 */
-	move.l	#0xFC0B8008, %a1
-	move.l	#(CONFIG_SYS_SDRAM_CFG1), (%a1)
-	nop
-	move.l	#0xFC0B800C, %a2
-	move.l	#(CONFIG_SYS_SDRAM_CFG2), (%a2)
-	nop
-
-	move.l	#0xFC0B8000, %a1	/* Mode */
-	move.l	#0xFC0B8004, %a2	/* Ctrl */
-
-	/* Issue PALL */
-	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
-	nop
-
-	/* Issue LEMR */
-	move.l	#(CONFIG_SYS_SDRAM_EMOD + 0x408), (%a1)
-	nop
-	move.l	#(CONFIG_SYS_SDRAM_MODE + 0x300), (%a1)
-	nop
-
-	move.l	#1000, %d1
-	bsr	asm_delay
-
-	/* Issue PALL */
-	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
-	nop
-
-	/* Perform two refresh cycles */
-	move.l	#(CONFIG_SYS_SDRAM_CTRL + 4), %d0
-	nop
-	move.l	%d0, (%a2)
-	move.l	%d0, (%a2)
-	nop
-
-	move.l	#(CONFIG_SYS_SDRAM_MODE + 0x200), (%a1)
-	nop
-
-	move.l	#500, %d1
-	bsr	asm_delay
-
-	move.l	#(CONFIG_SYS_SDRAM_CTRL), %d1
-	and.l	#0x7FFFFFFF, %d1
-
-	or.l	#0x10000C00, %d1
-
-	move.l	%d1, (%a2)
-	nop
-
-	move.l	#2000, %d1
-	bsr	asm_delay
-
-	rts
diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c
index 66b3d9a..84671f6 100644
--- a/board/freescale/mpc837xerdb/mpc837xerdb.c
+++ b/board/freescale/mpc837xerdb/mpc837xerdb.c
@@ -220,7 +220,7 @@ int misc_init_r(void)
 int board_late_init(void)
 {
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-#ifdef CONFIG_USB
+#ifdef CONFIG_USB_HOST
 	clrsetbits_be32(&immap->sysconf.sicrl, SICRL_USB_A, 0x40000000);
 #endif
 	return 0;
diff --git a/board/tplink/wdr4300/wdr4300.c b/board/tplink/wdr4300/wdr4300.c
index 9134d6b..f2b9210 100644
--- a/board/tplink/wdr4300/wdr4300.c
+++ b/board/tplink/wdr4300/wdr4300.c
@@ -15,7 +15,7 @@
 #include <mach/ddr.h>
 #include <debug_uart.h>
 
-#ifdef CONFIG_USB
+#ifdef CONFIG_USB_HOST
 static void wdr4300_usb_start(void)
 {
 	void __iomem *gpio_regs = map_physmem(AR71XX_GPIO_BASE,
diff --git a/board/tqc/tqma6/Kconfig b/board/tqc/tqma6/Kconfig
index 0cf6d83..a2a5905 100644
--- a/board/tqc/tqma6/Kconfig
+++ b/board/tqc/tqma6/Kconfig
@@ -65,7 +65,6 @@ config MBA6
 	bool "TQMa6 on MBa6 Starterkit"
 	select DM_ETH
 	select USB
-	select DM_USB
 	select CMD_USB
 	select USB_STORAGE
 	select USB_HOST_ETHER
diff --git a/cmd/Kconfig b/cmd/Kconfig
index f196e6c..e40d390 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1322,7 +1322,7 @@ config CMD_UNIVERSE
 
 config CMD_USB
 	bool "usb"
-	depends on USB
+	depends on USB_HOST
 	select HAVE_BLOCK_DEVICE
 	help
 	  USB support.
diff --git a/configs/M52277EVB_defconfig b/configs/M52277EVB_defconfig
deleted file mode 100644
index bab8ac4..0000000
--- a/configs/M52277EVB_defconfig
+++ /dev/null
@@ -1,34 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x0
-CONFIG_ENV_SIZE=0x1000
-CONFIG_ENV_SECT_SIZE=0x8000
-CONFIG_DEFAULT_DEVICE_TREE="M52277EVB"
-CONFIG_TARGET_M52277EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_SPANSION_BOOT"
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_JFFS2=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x40000
-# CONFIG_NET is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M52277EVB_stmicro_defconfig b/configs/M52277EVB_stmicro_defconfig
deleted file mode 100644
index 98c64ff..0000000
--- a/configs/M52277EVB_stmicro_defconfig
+++ /dev/null
@@ -1,36 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x43E00000
-CONFIG_ENV_SIZE=0x1000
-CONFIG_ENV_OFFSET=0x30000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_DEFAULT_DEVICE_TREE="M52277EVB_stmicro"
-CONFIG_TARGET_M52277EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT"
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_JFFS2=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_CS=y
-CONFIG_ENV_SPI_CS=2
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-# CONFIG_NET is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M54418TWR_defconfig b/configs/M54418TWR_defconfig
deleted file mode 100644
index 6aa4c2f..0000000
--- a/configs/M54418TWR_defconfig
+++ /dev/null
@@ -1,36 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x47E00000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x40000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_DEFAULT_DEVICE_TREE="M54418TWR"
-CONFIG_TARGET_M54418TWR=y
-CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=50000000"
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.1.1:/tftpboot/192.168.1.2  ip=192.168.1.2:192.168.1.1:192.168.1.1: 255.255.255.0::eth0:off:rw console=ttyS0,115200"
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_CS=y
-CONFIG_ENV_SPI_CS=1
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_ATMEL=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M54418TWR_nand_mii_defconfig b/configs/M54418TWR_nand_mii_defconfig
deleted file mode 100644
index 7273ee0..0000000
--- a/configs/M54418TWR_nand_mii_defconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x47E00000
-CONFIG_ENV_SIZE=0x20000
-CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_nand_mii"
-CONFIG_TARGET_M54418TWR=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_INPUT_CLKSRC=25000000"
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro,-(jffs2) console=ttyS0,115200"
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_MTD=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_ATMEL=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M54418TWR_nand_rmii_defconfig b/configs/M54418TWR_nand_rmii_defconfig
deleted file mode 100644
index 90df8f4..0000000
--- a/configs/M54418TWR_nand_rmii_defconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x47E00000
-CONFIG_ENV_SIZE=0x20000
-CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_nand_rmii"
-CONFIG_TARGET_M54418TWR=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_INPUT_CLKSRC=50000000"
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro,-(jffs2) console=ttyS0,115200"
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_MTD=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_ATMEL=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M54418TWR_nand_rmii_lowfreq_defconfig b/configs/M54418TWR_nand_rmii_lowfreq_defconfig
deleted file mode 100644
index d7b0f2d..0000000
--- a/configs/M54418TWR_nand_rmii_lowfreq_defconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x47E00000
-CONFIG_ENV_SIZE=0x20000
-CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_nand_rmii_lowfreq"
-CONFIG_TARGET_M54418TWR=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,LOW_MCFCLK,SYS_INPUT_CLKSRC=50000000"
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro,-(jffs2) console=ttyS0,115200"
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_MTD=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_ATMEL=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M54418TWR_serial_mii_defconfig b/configs/M54418TWR_serial_mii_defconfig
deleted file mode 100644
index 556bbef..0000000
--- a/configs/M54418TWR_serial_mii_defconfig
+++ /dev/null
@@ -1,36 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x47E00000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x40000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_serial_mii"
-CONFIG_TARGET_M54418TWR=y
-CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=25000000"
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.1.1:/tftpboot/192.168.1.2  ip=192.168.1.2:192.168.1.1:192.168.1.1: 255.255.255.0::eth0:off:rw console=ttyS0,115200"
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_CS=y
-CONFIG_ENV_SPI_CS=1
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_ATMEL=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M54418TWR_serial_rmii_defconfig b/configs/M54418TWR_serial_rmii_defconfig
deleted file mode 100644
index 19b1aa6..0000000
--- a/configs/M54418TWR_serial_rmii_defconfig
+++ /dev/null
@@ -1,36 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x47E00000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x40000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_serial_rmii"
-CONFIG_TARGET_M54418TWR=y
-CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=50000000"
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.1.1:/tftpboot/192.168.1.2  ip=192.168.1.2:192.168.1.1:192.168.1.1: 255.255.255.0::eth0:off:rw console=ttyS0,115200"
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_CS=y
-CONFIG_ENV_SPI_CS=1
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_ATMEL=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M54451EVB_defconfig b/configs/M54451EVB_defconfig
deleted file mode 100644
index a3583e5..0000000
--- a/configs/M54451EVB_defconfig
+++ /dev/null
@@ -1,40 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x0
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_DEFAULT_DEVICE_TREE="M54451EVB"
-CONFIG_TARGET_M54451EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_INPUT_CLKSRC=24000000"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)"
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x40000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M54451EVB_stmicro_defconfig b/configs/M54451EVB_stmicro_defconfig
deleted file mode 100644
index 5f5e6a5..0000000
--- a/configs/M54451EVB_stmicro_defconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x47E00000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x20000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_DEFAULT_DEVICE_TREE="M54451EVB_stmicro"
-CONFIG_TARGET_M54451EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_INPUT_CLKSRC=24000000"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)"
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_CS=y
-CONFIG_ENV_SPI_CS=1
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M54455EVB_a66_defconfig b/configs/M54455EVB_a66_defconfig
deleted file mode 100644
index 50bdb2c..0000000
--- a/configs/M54455EVB_a66_defconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_DEFAULT_DEVICE_TREE="M54455EVB_a66"
-CONFIG_TARGET_M54455EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_INPUT_CLKSRC=66666666"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_IDE=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_ISO_PARTITION=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x4040000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M54455EVB_defconfig b/configs/M54455EVB_defconfig
deleted file mode 100644
index 40d025f..0000000
--- a/configs/M54455EVB_defconfig
+++ /dev/null
@@ -1,45 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_DEFAULT_DEVICE_TREE="M54455EVB"
-CONFIG_TARGET_M54455EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_INPUT_CLKSRC=33333333"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_IDE=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_ISO_PARTITION=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x4040000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M54455EVB_i66_defconfig b/configs/M54455EVB_i66_defconfig
deleted file mode 100644
index 97d5d15..0000000
--- a/configs/M54455EVB_i66_defconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x0
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_DEFAULT_DEVICE_TREE="M54455EVB_i66"
-CONFIG_TARGET_M54455EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_INPUT_CLKSRC=66666666"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_IDE=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_ISO_PARTITION=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x40000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M54455EVB_intel_defconfig b/configs/M54455EVB_intel_defconfig
deleted file mode 100644
index d82f091..0000000
--- a/configs/M54455EVB_intel_defconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x0
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_DEFAULT_DEVICE_TREE="M54455EVB_intel"
-CONFIG_TARGET_M54455EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_INPUT_CLKSRC=33333333"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_IDE=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_ISO_PARTITION=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x40000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M54455EVB_stm33_defconfig b/configs/M54455EVB_stm33_defconfig
deleted file mode 100644
index 147d87e..0000000
--- a/configs/M54455EVB_stm33_defconfig
+++ /dev/null
@@ -1,47 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x4FE00000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x30000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_DEFAULT_DEVICE_TREE="M54455EVB_stm33"
-CONFIG_TARGET_M54455EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_STMICRO_BOOT,CF_SBF,SYS_INPUT_CLKSRC=33333333"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_IDE=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_ISO_PARTITION=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_CS=y
-CONFIG_ENV_SPI_CS=1
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_DM_ETH=y
-CONFIG_MCFFEC=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index c0354bc..2034cd1 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -57,5 +57,6 @@ CONFIG_CONS_INDEX=5
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_STORAGE=y
 CONFIG_OF_LIBFDT=y
diff --git a/configs/draco_defconfig b/configs/draco_defconfig
index 5ee0449..5d9a6aa 100644
--- a/configs/draco_defconfig
+++ b/configs/draco_defconfig
@@ -90,6 +90,7 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_DSPS=y
diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig
index ee4e6cc..36d96e5 100644
--- a/configs/etamin_defconfig
+++ b/configs/etamin_defconfig
@@ -91,6 +91,7 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_DSPS=y
diff --git a/configs/imx6dl_mamoj_defconfig b/configs/imx6dl_mamoj_defconfig
index a163f42..48f0c03 100644
--- a/configs/imx6dl_mamoj_defconfig
+++ b/configs/imx6dl_mamoj_defconfig
@@ -52,6 +52,7 @@ CONFIG_PINCTRL_IMX6=y
 CONFIG_MXC_UART=y
 CONFIG_IMX_THERMAL=y
 CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig
index 2798d56..44cba29 100644
--- a/configs/k2e_evm_defconfig
+++ b/configs/k2e_evm_defconfig
@@ -76,6 +76,7 @@ CONFIG_DM_SPI=y
 CONFIG_DAVINCI_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig
index 6745da1..2392aec 100644
--- a/configs/k2hk_evm_defconfig
+++ b/configs/k2hk_evm_defconfig
@@ -76,6 +76,7 @@ CONFIG_DM_SPI=y
 CONFIG_DAVINCI_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig
index f23bdbf..021129b 100644
--- a/configs/k2l_evm_defconfig
+++ b/configs/k2l_evm_defconfig
@@ -76,6 +76,7 @@ CONFIG_DM_SPI=y
 CONFIG_DAVINCI_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig
index 7de4cdb..44e9dc7 100644
--- a/configs/pxm2_defconfig
+++ b/configs/pxm2_defconfig
@@ -90,6 +90,7 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_DSPS=y
diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig
index 5448386..5401892 100644
--- a/configs/rastaban_defconfig
+++ b/configs/rastaban_defconfig
@@ -90,6 +90,7 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_DSPS=y
diff --git a/configs/rut_defconfig b/configs/rut_defconfig
index fa5250e..91da734 100644
--- a/configs/rut_defconfig
+++ b/configs/rut_defconfig
@@ -90,6 +90,7 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_DSPS=y
diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig
index b64f7bb..c52e7cb 100644
--- a/configs/sniper_defconfig
+++ b/configs/sniper_defconfig
@@ -31,7 +31,6 @@ CONFIG_SYS_OMAP24_I2C_SPEED=400000
 CONFIG_TWL4030_INPUT=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_CONS_INDEX=3
-CONFIG_USB=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_OMAP2PLUS=y
 CONFIG_TWL4030_USB=y
diff --git a/configs/socrates_defconfig b/configs/socrates_defconfig
index cdf8630..1631b4f 100644
--- a/configs/socrates_defconfig
+++ b/configs/socrates_defconfig
@@ -73,5 +73,6 @@ CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 # CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_PCI=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig
index 67e1e68..c9a99ca 100644
--- a/configs/thuban_defconfig
+++ b/configs/thuban_defconfig
@@ -90,6 +90,7 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_DSPS=y
diff --git a/configs/vinco_defconfig b/configs/vinco_defconfig
index be7aaa9..434d90c 100644
--- a/configs/vinco_defconfig
+++ b/configs/vinco_defconfig
@@ -33,13 +33,14 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AT91_GPIO=y
 CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=50000000
 CONFIG_PHY_SMSC=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="L+G VInCo"
diff --git a/doc/README.m54418twr b/doc/README.m54418twr
deleted file mode 100644
index 0ca74aa..0000000
--- a/doc/README.m54418twr
+++ /dev/null
@@ -1,245 +0,0 @@
-Freescale MCF54418TWR ColdFire Development Board
-================================================
-
-TsiChung Liew(Tsi-Chung.Liew@freescale.com)
-Created Mar 22, 2012
-===========================================
-
-
-Changed files:
-==============
-
-- board/freescale/m54418twr/m54418twr.c	Dram setup
-- board/freescale/m54418twr/Makefile	Makefile
-- board/freescale/m54418twr/config.mk	config make
-- board/freescale/m54418twr/u-boot.lds	Linker description
-- board/freescale/m54418twr/sbf_dram_init.S
-                                        DDR/SDRAM initialization
-
-- arch/m68k/cpu/mcf5445x/cpu.c		cpu specific code
-- arch/m68k/cpu/mcf5445x/cpu_init.c	Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
-- arch/m68k/cpu/mcf5445x/interrupts.c	cpu specific interrupt support
-- arch/m68k/cpu/mcf5445x/speed.c	system, pci, flexbus, and cpu clock
-- arch/m68k/cpu/mcf5445x/Makefile	Makefile
-- arch/m68k/cpu/mcf5445x/config.mk	config make
-- arch/m68k/cpu/mcf5445x/start.S	start up assembly code
-
-- doc/README.m54418twr			This readme file
-
-- drivers/net/mcffec.c			ColdFire common FEC driver
-- drivers/net/mcfmii.c			ColdFire common MII driver
-- drivers/serial/mcfuart.c		ColdFire common UART driver
-
-- arch/m68k/include/asm/bitops.h	Bit operation function export
-- arch/m68k/include/asm/byteorder.h	Byte order functions
-- arch/m68k/include/asm/fec.h		FEC structure and definition
-- arch/m68k/include/asm/global_data.h	Global data structure
-- arch/m68k/include/asm/immap.h		ColdFire specific header file and driver macros
-- arch/m68k/include/asm/immap_5441x.h	mcf5441x specific header file
-- arch/m68k/include/asm/io.h		io functions
-- arch/m68k/include/asm/m5441x.h	mcf5441x specific header file
-- arch/m68k/include/asm/posix_types.h	Posix
-- arch/m68k/include/asm/processor.h	header file
-- arch/m68k/include/asm/ptrace.h	Exception structure
-- arch/m68k/include/asm/rtc.h		Realtime clock header file
-- arch/m68k/include/asm/string.h	String function export
-- arch/m68k/include/asm/timer.h		Timer structure and definition
-- arch/m68k/include/asm/types.h		Data types definition
-- arch/m68k/include/asm/uart.h		Uart structure and definition
-- arch/m68k/include/asm/u-boot.h	u-boot structure
-
-- include/configs/M54418TWR.h		Board specific configuration file
-
-- arch/m68k/lib/board.c			board init function
-- arch/m68k/lib/cache.c
-- arch/m68k/lib/interrupts.c		Coldfire common interrupt functions
-- arch/m68k/lib/time.c			Timer functions (Dma timer and PIT)
-- arch/m68k/lib/traps.c			Exception init code
-
-1 MCF5441x specific Options/Settings
-====================================
-1.1 pre-loader is no longer suppoer in thie coldfire family
-
-1.2 Configuration settings for M54418TWR Development Board
-CONFIG_MCF5441x			-- define for all MCF5441x CPUs
-CONFIG_M54418			-- define for all Freescale MCF54418 CPUs
-
-CONFIG_MCFUART			-- define to use common CF Uart driver
-CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
-CONFIG_BAUDRATE			-- define UART baudrate
-
-CONFIG_MCFFEC			-- define to use common CF FEC driver
-CONFIG_MII			-- enable to use MII driver
-CONFIG_SYS_DISCOVER_PHY		-- enable PHY discovery
-CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
-CONFIG_SYS_FAULT_ECHO_LINK_DOWN	--
-CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
-CONFIG_SYS_FEC1_PINMUX		-- Set FEC1 Pin configuration
-CONFIG_SYS_FEC0_MIIBASE		-- Set FEC0 MII base register
-CONFIG_SYS_FEC1_MIIBASE		-- Set FEC0 MII base register
-MCFFEC_TOUT_LOOP		-- set FEC timeout loop
-CONFIG_HAS_ETH1			-- define to enable second FEC in u-boot
-
-CONFIG_MCFTMR			-- define to use DMA timer
-
-CONFIG_SYS_IMMR			-- define for MBAR offset
-
-CONFIG_EXTRA_CLOCK		-- Enable extra clock such as vco, flexbus, pci, etc
-
-CONFIG_SYS_MBAR			-- define MBAR offset
-
-CONFIG_MONITOR_IS_IN_RAM 	-- Not support
-
-CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF54455 internal SRAM
-
-CONFIG_SYS_CSn_BASE		-- defines the Chip Select Base register
-CONFIG_SYS_CSn_MASK		-- defines the Chip Select Mask register
-CONFIG_SYS_CSn_CTRL		-- defines the Chip Select Control register
-
-CONFIG_SYS_SDRAM_BASE		-- defines the DRAM Base
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. System memory map:
-	MRAM:		0x00000000-0x0003FFFF (256KB)
-	DDR:		0x40000000-0x47FFFFFF (128MB)
-	SRAM:		0x80000000-0x8000FFFF (64KB)
-	IP:		0xE0000000-0xFFFFFFFF (512MB)
-
-3. COMPILATION
-==============
-3.1	To create U-Boot the gcc-4.x compiler set (ColdFire ELF version)
-from codesourcery.com was used. Download it from:
-http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
-
-3.2 Compilation
-   export CROSS_COMPILE=cross-compile-prefix
-   cd u-boot
-   make distclean
-   make M54418TWR_config, or			- default to spi serial flash boot, 50Mhz input clock
-   make M54418TWR_nand_mii_config, or		- default to nand flash boot, mii mode, 25Mhz input clock
-   make M54418TWR_nand_rmii_config, or		- default to nand flash boot, rmii mode, 50Mhz input clock
-   make M54418TWR_nand_rmii_lowfreq_config, or	- default to nand flash boot, rmii mode, 50Mhz input clock
-   make M54418TWR_serial_mii_config, or		- default to spi serial flash boot, 25Mhz input clock
-   make M54418TWR_serial_rmii_config, or	- default to spi serial flash boot, 50Mhz input clock
-   make
-
-4. SCREEN DUMP
-==============
-4.1 M54418TWR Development board
-    Boot from NAND flash (NOTE: May not show exactly the same)
-
-U-Boot 2012.10-00209-g12ae1d8-dirty (Oct 18 2012 - 15:54:54)
-
-CPU:   Freescale MCF54418 (Mask:a3 Version:1)
-       CPU CLK 250 MHz BUS CLK 125 MHz FLB CLK 125 MHz
-       INP CLK 50 MHz VCO CLK 500 MHz
-Board: Freescale MCF54418 Tower System
-SPI:   ready
-DRAM:  128 MiB
-NAND:  256 MiB
-In:    serial
-Out:   serial
-Err:   serial
-Net:   FEC0, FEC1
--> pri
-baudrate=115200
-bootargs=root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(k
-ernel)ro,-(jffs2) console=ttyS0,115200
-bootdelay=2
-eth1addr=00:e0:0c:bc:e5:61
-ethact=FEC0
-ethaddr=00:e0:0c:bc:e5:60
-fileaddr=40010000
-filesize=27354
-gatewayip=192.168.1.1
-hostname=M54418TWR
-inpclk=50000000
-ipaddr=192.168.1.2
-load=tftp ${loadaddr} ${u-boot};
-loadaddr=0x40010000
-mem=129024k
-netdev=eth0
-netmask=255.255.255.0
-prog=nand device 0;nand erase 0 40000;nb_update ${loadaddr} ${filesize};save
-serverip=192.168.1.1
-stderr=serial
-stdin=serial
-stdout=serial
-u-boot=u-boot.bin
-upd=run load; run prog
-
-Environment size: 653/131068 bytes
--> bdinfo
-memstart    = 0x40000000
-memsize     = 0x08000000
-flashstart  = 0x00000000
-flashsize   = 0x00000000
-flashoffset = 0x00000000
-sramstart   = 0x80000000
-sramsize    = 0x00010000
-mbar        = 0xFC000000
-cpufreq     =    250 MHz
-busfreq     =    125 MHz
-flbfreq     =    125 MHz
-inpfreq     =     50 MHz
-vcofreq     =    500 MHz
-ethaddr     = 00:e0:0c:bc:e5:60
-eth1addr    = 00:e0:0c:bc:e5:61
-ip_addr     = 192.168.1.2
-baudrate    = 115200 bps
--> help
-?       - alias for 'help'
-base    - print or set address offset
-bdinfo  - print Board Info structure
-boot    - boot default, i.e., run 'bootcmd'
-bootd   - boot default, i.e., run 'bootcmd'
-bootelf - Boot from an ELF image in memory
-bootm   - boot application image from memory
-bootp   - boot image via network using BOOTP/TFTP protocol
-bootvx  - Boot vxWorks from an ELF image
-cmp     - memory compare
-coninfo - print console devices and information
-cp      - memory copy
-crc32   - checksum calculation
-dcache  - enable or disable data cache
-dhcp    - boot image via network using DHCP/TFTP protocol
-echo    - echo args to console
-editenv - edit environment variable
-env     - environment handling commands
-exit    - exit script
-false   - do nothing, unsuccessfully
-go      - start application at address 'addr'
-help    - print command description/usage
-icache  - enable or disable instruction cache
-iminfo  - print header information for application image
-imxtract- extract a part of a multi-image
-itest   - return true/false on integer compare
-loop    - infinite loop on address range
-md      - memory display
-mdio    - MDIO utility commands
-mii     - MII utility commands
-mm      - memory modify (auto-incrementing address)
-mtest   - simple RAM read/write test
-mw      - memory write (fill)
-nand    - NAND sub-system
-nb_update- Nand boot update  program
-nboot   - boot from NAND device
-nfs     - boot image via network using NFS protocol
-nm      - memory modify (constant address)
-ping    - send ICMP ECHO_REQUEST to network host
-printenv- print environment variables
-reginfo - print register information
-reset   - Perform RESET of the CPU
-run     - run commands in an environment variable
-saveenv - save environment variables to persistent storage
-setenv  - set environment variables
-sf      - SPI flash sub-system
-showvar - print local hushshell variables
-sleep   - delay execution for some time
-source  - run script from memory
-sspi    - SPI utility command
-test    - minimal test like /bin/sh
-tftpboot- boot image via network using TFTP protocol
-true    - do nothing, successfully
-version - print monitor, compiler and linker version
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 1e6dad8..4023332 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -1,7 +1,7 @@
 config BLK
 	bool "Support block devices"
 	depends on DM
-	default y if DM_MMC
+	default y if DM_MMC || DM_USB
 	help
 	  Enable support for block devices, such as SCSI, MMC and USB
 	  flash sticks. These provide a block-level interface which permits
diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c
index 43bb761..cef9eec 100644
--- a/drivers/net/mcffec.c
+++ b/drivers/net/mcffec.c
@@ -105,17 +105,11 @@ static void set_fec_duplex_speed(volatile fec_t *fecp, int dup_spd)
 	}
 
 	if ((dup_spd & 0xFFFF) == _100BASET) {
-#ifdef CONFIG_MCF5445x
-		fecp->rcr &= ~0x200;	/* disabled 10T base */
-#endif
 #ifdef MII_DEBUG
 		printf("100Mbps\n");
 #endif
 		bd->bi_ethspeed = 100;
 	} else {
-#ifdef CONFIG_MCF5445x
-		fecp->rcr |= 0x200;	/* enabled 10T base */
-#endif
 #ifdef MII_DEBUG
 		printf("10Mbps\n");
 #endif
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index c49cb6e..2ef4d46 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -1,22 +1,23 @@
 menuconfig PCI
 	bool "PCI support"
+	depends on DM
 	default y if PPC
+	select DM_PCI
 	help
 	  Enable support for PCI (Peripheral Interconnect Bus), a type of bus
 	  used on some devices to allow the CPU to communicate with its
 	  peripherals.
 
-if PCI
-
 config DM_PCI
-	bool "Enable driver model for PCI"
-	depends on DM
+	bool
 	help
 	  Use driver model for PCI. Driver model is the new method for
 	  orgnising devices in U-Boot. For PCI, driver model keeps track of
 	  available PCI devices, allows scanning of PCI buses and provides
 	  device configuration support.
 
+if PCI
+
 config DM_PCI_COMPAT
 	bool "Enable compatible functions for PCI"
 	depends on DM_PCI
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index ec8ee9d..83d7a4e 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -3,16 +3,12 @@
 # (C) Copyright 2000-2007
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 
-ifneq ($(CONFIG_DM_PCI),)
 obj-$(CONFIG_DM_VIDEO) += pci_rom.o
 obj-$(CONFIG_PCI) += pci-uclass.o pci_auto.o
 obj-$(CONFIG_DM_PCI_COMPAT) += pci_compat.o
 obj-$(CONFIG_PCI_SANDBOX) += pci_sandbox.o
 obj-$(CONFIG_SANDBOX) += pci-emul-uclass.o
 obj-$(CONFIG_X86) += pci_x86.o pci_rom.o
-else
-obj-$(CONFIG_PCI) += pci.o pci_auto_old.o
-endif
 obj-$(CONFIG_PCI) += pci_auto_common.o pci_common.o
 
 obj-$(CONFIG_PCIE_ECAM_GENERIC) += pcie_ecam_generic.o
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
deleted file mode 100644
index d8f9239..0000000
--- a/drivers/pci/pci.c
+++ /dev/null
@@ -1,588 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Andreas Heppel <aheppel@sysgo.de>
- *
- * (C) Copyright 2002, 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-/*
- * Old PCI routines
- *
- * Do not change this file. Instead, convert your board to use CONFIG_DM_PCI
- * and change pci-uclass.c.
- */
-
-#include <common.h>
-#include <init.h>
-#include <log.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-
-#include <command.h>
-#include <env.h>
-#include <errno.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PCI_HOSE_OP(rw, size, type)					\
-int pci_hose_##rw##_config_##size(struct pci_controller *hose,		\
-				  pci_dev_t dev,			\
-				  int offset, type value)		\
-{									\
-	return hose->rw##_##size(hose, dev, offset, value);		\
-}
-
-PCI_HOSE_OP(read, byte, u8 *)
-PCI_HOSE_OP(read, word, u16 *)
-PCI_HOSE_OP(read, dword, u32 *)
-PCI_HOSE_OP(write, byte, u8)
-PCI_HOSE_OP(write, word, u16)
-PCI_HOSE_OP(write, dword, u32)
-
-#define PCI_OP(rw, size, type, error_code)				\
-int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value)	\
-{									\
-	struct pci_controller *hose = pci_bus_to_hose(PCI_BUS(dev));	\
-									\
-	if (!hose)							\
-	{								\
-		error_code;						\
-		return -1;						\
-	}								\
-									\
-	return pci_hose_##rw##_config_##size(hose, dev, offset, value);	\
-}
-
-PCI_OP(read, byte, u8 *, *value = 0xff)
-PCI_OP(read, word, u16 *, *value = 0xffff)
-PCI_OP(read, dword, u32 *, *value = 0xffffffff)
-PCI_OP(write, byte, u8, )
-PCI_OP(write, word, u16, )
-PCI_OP(write, dword, u32, )
-
-#define PCI_READ_VIA_DWORD_OP(size, type, off_mask)			\
-int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\
-					pci_dev_t dev,			\
-					int offset, type val)		\
-{									\
-	u32 val32;							\
-									\
-	if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) {	\
-		*val = -1;						\
-		return -1;						\
-	}								\
-									\
-	*val = (val32 >> ((offset & (int)off_mask) * 8));		\
-									\
-	return 0;							\
-}
-
-#define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask)		\
-int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose,\
-					     pci_dev_t dev,		\
-					     int offset, type val)	\
-{									\
-	u32 val32, mask, ldata, shift;					\
-									\
-	if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\
-		return -1;						\
-									\
-	shift = ((offset & (int)off_mask) * 8);				\
-	ldata = (((unsigned long)val) & val_mask) << shift;		\
-	mask = val_mask << shift;					\
-	val32 = (val32 & ~mask) | ldata;				\
-									\
-	if (pci_hose_write_config_dword(hose, dev, offset & 0xfc, val32) < 0)\
-		return -1;						\
-									\
-	return 0;							\
-}
-
-PCI_READ_VIA_DWORD_OP(byte, u8 *, 0x03)
-PCI_READ_VIA_DWORD_OP(word, u16 *, 0x02)
-PCI_WRITE_VIA_DWORD_OP(byte, u8, 0x03, 0x000000ff)
-PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff)
-
-/*
- *
- */
-
-static struct pci_controller* hose_head;
-
-struct pci_controller *pci_get_hose_head(void)
-{
-	if (gd->hose)
-		return gd->hose;
-
-	return hose_head;
-}
-
-void pci_register_hose(struct pci_controller* hose)
-{
-	struct pci_controller **phose = &hose_head;
-
-	while(*phose)
-		phose = &(*phose)->next;
-
-	hose->next = NULL;
-
-	*phose = hose;
-}
-
-struct pci_controller *pci_bus_to_hose(int bus)
-{
-	struct pci_controller *hose;
-
-	for (hose = pci_get_hose_head(); hose; hose = hose->next) {
-		if (bus >= hose->first_busno && bus <= hose->last_busno)
-			return hose;
-	}
-
-	printf("pci_bus_to_hose() failed\n");
-	return NULL;
-}
-
-struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr)
-{
-	struct pci_controller *hose;
-
-	for (hose = pci_get_hose_head(); hose; hose = hose->next) {
-		if (hose->cfg_addr == cfg_addr)
-			return hose;
-	}
-
-	return NULL;
-}
-
-int pci_last_busno(void)
-{
-	struct pci_controller *hose = pci_get_hose_head();
-
-	if (!hose)
-		return -1;
-
-	while (hose->next)
-		hose = hose->next;
-
-	return hose->last_busno;
-}
-
-pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
-{
-	struct pci_controller * hose;
-	pci_dev_t bdf;
-	int bus;
-
-	for (hose = pci_get_hose_head(); hose; hose = hose->next) {
-		for (bus = hose->first_busno; bus <= hose->last_busno; bus++) {
-			bdf = pci_hose_find_devices(hose, bus, ids, &index);
-			if (bdf != -1)
-				return bdf;
-		}
-	}
-
-	return -1;
-}
-
-static int pci_hose_config_device(struct pci_controller *hose, pci_dev_t dev,
-				  ulong io, pci_addr_t mem, ulong command)
-{
-	u32 bar_response;
-	unsigned int old_command;
-	pci_addr_t bar_value;
-	pci_size_t bar_size;
-	unsigned char pin;
-	int bar, found_mem64;
-
-	debug("PCI Config: I/O=0x%lx, Memory=0x%llx, Command=0x%lx\n", io,
-		(u64)mem, command);
-
-	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, 0);
-
-	for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_5; bar += 4) {
-		pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
-		pci_hose_read_config_dword(hose, dev, bar, &bar_response);
-
-		if (!bar_response)
-			continue;
-
-		found_mem64 = 0;
-
-		/* Check the BAR type and set our address mask */
-		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
-			bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1;
-			/* round up region base address to a multiple of size */
-			io = ((io - 1) | (bar_size - 1)) + 1;
-			bar_value = io;
-			/* compute new region base address */
-			io = io + bar_size;
-		} else {
-			if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
-				PCI_BASE_ADDRESS_MEM_TYPE_64) {
-				u32 bar_response_upper;
-				u64 bar64;
-				pci_hose_write_config_dword(hose, dev, bar + 4,
-					0xffffffff);
-				pci_hose_read_config_dword(hose, dev, bar + 4,
-					&bar_response_upper);
-
-				bar64 = ((u64)bar_response_upper << 32) | bar_response;
-
-				bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
-				found_mem64 = 1;
-			} else {
-				bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
-			}
-
-			/* round up region base address to multiple of size */
-			mem = ((mem - 1) | (bar_size - 1)) + 1;
-			bar_value = mem;
-			/* compute new region base address */
-			mem = mem + bar_size;
-		}
-
-		/* Write it out and update our limit */
-		pci_hose_write_config_dword (hose, dev, bar, (u32)bar_value);
-
-		if (found_mem64) {
-			bar += 4;
-#ifdef CONFIG_SYS_PCI_64BIT
-			pci_hose_write_config_dword(hose, dev, bar,
-				(u32)(bar_value >> 32));
-#else
-			pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
-#endif
-		}
-	}
-
-	/* Configure Cache Line Size Register */
-	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-	/* Configure Latency Timer */
-	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
-
-	/* Disable interrupt line, if device says it wants to use interrupts */
-	pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &pin);
-	if (pin != 0) {
-		pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
-					   PCI_INTERRUPT_LINE_DISABLE);
-	}
-
-	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &old_command);
-	pci_hose_write_config_dword(hose, dev, PCI_COMMAND,
-				     (old_command & 0xffff0000) | command);
-
-	return 0;
-}
-
-/*
- *
- */
-
-struct pci_config_table *pci_find_config(struct pci_controller *hose,
-					 unsigned short class,
-					 unsigned int vendor,
-					 unsigned int device,
-					 unsigned int bus,
-					 unsigned int dev,
-					 unsigned int func)
-{
-	struct pci_config_table *table;
-
-	for (table = hose->config_table; table && table->vendor; table++) {
-		if ((table->vendor == PCI_ANY_ID || table->vendor == vendor) &&
-		    (table->device == PCI_ANY_ID || table->device == device) &&
-		    (table->class  == PCI_ANY_ID || table->class  == class)  &&
-		    (table->bus    == PCI_ANY_ID || table->bus    == bus)    &&
-		    (table->dev    == PCI_ANY_ID || table->dev    == dev)    &&
-		    (table->func   == PCI_ANY_ID || table->func   == func)) {
-			return table;
-		}
-	}
-
-	return NULL;
-}
-
-void pci_cfgfunc_config_device(struct pci_controller *hose,
-			       pci_dev_t dev,
-			       struct pci_config_table *entry)
-{
-	pci_hose_config_device(hose, dev, entry->priv[0], entry->priv[1],
-		entry->priv[2]);
-}
-
-void pci_cfgfunc_do_nothing(struct pci_controller *hose,
-			    pci_dev_t dev, struct pci_config_table *entry)
-{
-}
-
-/*
- * HJF: Changed this to return int. I think this is required
- * to get the correct result when scanning bridges
- */
-extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
-__weak int pci_print_dev(struct pci_controller *hose, pci_dev_t dev)
-{
-	if (dev == PCI_BDF(hose->first_busno, 0, 0))
-		return 0;
-
-	return 1;
-}
-#endif /* CONFIG_PCI_SCAN_SHOW */
-
-int pci_hose_scan_bus(struct pci_controller *hose, int bus)
-{
-	unsigned int sub_bus, found_multi = 0;
-	unsigned short vendor, device, class;
-	unsigned char header_type;
-#ifndef CONFIG_PCI_PNP
-	struct pci_config_table *cfg;
-#endif
-	pci_dev_t dev;
-#ifdef CONFIG_PCI_SCAN_SHOW
-	static int indent = 0;
-#endif
-
-	sub_bus = bus;
-
-	for (dev =  PCI_BDF(bus,0,0);
-	     dev <  PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1,
-				PCI_MAX_PCI_FUNCTIONS - 1);
-	     dev += PCI_BDF(0, 0, 1)) {
-
-		if (pci_skip_dev(hose, dev))
-			continue;
-
-		if (PCI_FUNC(dev) && !found_multi)
-			continue;
-
-		pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
-
-		pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor);
-
-		if (vendor == 0xffff || vendor == 0x0000)
-			continue;
-
-		if (!PCI_FUNC(dev))
-			found_multi = header_type & 0x80;
-
-		debug("PCI Scan: Found Bus %d, Device %d, Function %d\n",
-			PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));
-
-		pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device);
-		pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
-
-#ifdef CONFIG_PCI_FIXUP_DEV
-		board_pci_fixup_dev(hose, dev, vendor, device, class);
-#endif
-
-#ifdef CONFIG_PCI_SCAN_SHOW
-		indent++;
-
-		/* Print leading space, including bus indentation */
-		printf("%*c", indent + 1, ' ');
-
-		if (pci_print_dev(hose, dev)) {
-			printf("%02x:%02x.%-*x - %04x:%04x - %s\n",
-			       PCI_BUS(dev), PCI_DEV(dev), 6 - indent, PCI_FUNC(dev),
-			       vendor, device, pci_class_str(class >> 8));
-		}
-#endif
-
-#ifdef CONFIG_PCI_PNP
-		sub_bus = max((unsigned int)pciauto_config_device(hose, dev),
-			      sub_bus);
-#else
-		cfg = pci_find_config(hose, class, vendor, device,
-				      PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));
-		if (cfg) {
-			cfg->config_device(hose, dev, cfg);
-			sub_bus = max(sub_bus,
-				      (unsigned int)hose->current_busno);
-		}
-#endif
-
-#ifdef CONFIG_PCI_SCAN_SHOW
-		indent--;
-#endif
-
-		if (hose->fixup_irq)
-			hose->fixup_irq(hose, dev);
-	}
-
-	return sub_bus;
-}
-
-int pci_hose_scan(struct pci_controller *hose)
-{
-#if defined(CONFIG_PCI_BOOTDELAY)
-	char *s;
-	int i;
-
-	if (!gd->pcidelay_done) {
-		/* wait "pcidelay" ms (if defined)... */
-		s = env_get("pcidelay");
-		if (s) {
-			int val = simple_strtoul(s, NULL, 10);
-			for (i = 0; i < val; i++)
-				udelay(1000);
-		}
-		gd->pcidelay_done = 1;
-	}
-#endif /* CONFIG_PCI_BOOTDELAY */
-
-#ifdef CONFIG_PCI_SCAN_SHOW
-	puts("PCI:\n");
-#endif
-
-	/*
-	 * Start scan at current_busno.
-	 * PCIe will start scan at first_busno+1.
-	 */
-	/* For legacy support, ensure current >= first */
-	if (hose->first_busno > hose->current_busno)
-		hose->current_busno = hose->first_busno;
-#ifdef CONFIG_PCI_PNP
-	pciauto_config_init(hose);
-#endif
-	return pci_hose_scan_bus(hose, hose->current_busno);
-}
-
-int pci_init(void)
-{
-	hose_head = NULL;
-
-	/* allow env to disable pci init/enum */
-	if (env_get("pcidisable") != NULL)
-		return 0;
-
-	/* now call board specific pci_init()... */
-	pci_init_board();
-
-	return 0;
-}
-
-/* Returns the address of the requested capability structure within the
- * device's PCI configuration space or 0 in case the device does not
- * support it.
- * */
-int pci_hose_find_capability(struct pci_controller *hose, pci_dev_t dev,
-			     int cap)
-{
-	int pos;
-	u8 hdr_type;
-
-	pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &hdr_type);
-
-	pos = pci_hose_find_cap_start(hose, dev, hdr_type & 0x7F);
-
-	if (pos)
-		pos = pci_find_cap(hose, dev, pos, cap);
-
-	return pos;
-}
-
-/* Find the header pointer to the Capabilities*/
-int pci_hose_find_cap_start(struct pci_controller *hose, pci_dev_t dev,
-			    u8 hdr_type)
-{
-	u16 status;
-
-	pci_hose_read_config_word(hose, dev, PCI_STATUS, &status);
-
-	if (!(status & PCI_STATUS_CAP_LIST))
-		return 0;
-
-	switch (hdr_type) {
-	case PCI_HEADER_TYPE_NORMAL:
-	case PCI_HEADER_TYPE_BRIDGE:
-		return PCI_CAPABILITY_LIST;
-	case PCI_HEADER_TYPE_CARDBUS:
-		return PCI_CB_CAPABILITY_LIST;
-	default:
-		return 0;
-	}
-}
-
-int pci_find_cap(struct pci_controller *hose, pci_dev_t dev, int pos, int cap)
-{
-	int ttl = PCI_FIND_CAP_TTL;
-	u8 id;
-	u8 next_pos;
-
-	while (ttl--) {
-		pci_hose_read_config_byte(hose, dev, pos, &next_pos);
-		if (next_pos < CAP_START_POS)
-			break;
-		next_pos &= ~3;
-		pos = (int) next_pos;
-		pci_hose_read_config_byte(hose, dev,
-					  pos + PCI_CAP_LIST_ID, &id);
-		if (id == 0xff)
-			break;
-		if (id == cap)
-			return pos;
-		pos += PCI_CAP_LIST_NEXT;
-	}
-	return 0;
-}
-
-/**
- * pci_find_next_ext_capability - Find an extended capability
- *
- * Returns the address of the next matching extended capability structure
- * within the device's PCI configuration space or 0 if the device does
- * not support it.  Some capabilities can occur several times, e.g., the
- * vendor-specific capability, and this provides a way to find them all.
- */
-int pci_find_next_ext_capability(struct pci_controller *hose, pci_dev_t dev,
-				 int start, int cap)
-{
-	u32 header;
-	int ttl, pos = PCI_CFG_SPACE_SIZE;
-
-	/* minimum 8 bytes per capability */
-	ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
-
-	if (start)
-		pos = start;
-
-	pci_hose_read_config_dword(hose, dev, pos, &header);
-	if (header == 0xffffffff || header == 0)
-		return 0;
-
-	while (ttl-- > 0) {
-		if (PCI_EXT_CAP_ID(header) == cap && pos != start)
-			return pos;
-
-		pos = PCI_EXT_CAP_NEXT(header);
-		if (pos < PCI_CFG_SPACE_SIZE)
-			break;
-
-		pci_hose_read_config_dword(hose, dev, pos, &header);
-		if (header == 0xffffffff || header == 0)
-			break;
-	}
-
-	return 0;
-}
-
-/**
- * pci_hose_find_ext_capability - Find an extended capability
- *
- * Returns the address of the requested extended capability structure
- * within the device's PCI configuration space or 0 if the device does
- * not support it.
- */
-int pci_hose_find_ext_capability(struct pci_controller *hose, pci_dev_t dev,
-				 int cap)
-{
-	return pci_find_next_ext_capability(hose, dev, 0, cap);
-}
diff --git a/drivers/pci/pci_auto_old.c b/drivers/pci/pci_auto_old.c
deleted file mode 100644
index c56ff53..0000000
--- a/drivers/pci/pci_auto_old.c
+++ /dev/null
@@ -1,387 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * PCI autoconfiguration library (legacy version, do not change)
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * Copyright 2000 MontaVista Software Inc.
- */
-
-#include <common.h>
-#include <errno.h>
-#include <log.h>
-#include <pci.h>
-
-/*
- * Do not change this file. Instead, convert your board to use CONFIG_DM_PCI
- * and change pci_auto.c.
- */
-
-/* the user can define CONFIG_SYS_PCI_CACHE_LINE_SIZE to avoid problems */
-#ifndef CONFIG_SYS_PCI_CACHE_LINE_SIZE
-#define CONFIG_SYS_PCI_CACHE_LINE_SIZE	8
-#endif
-
-/*
- *
- */
-
-void pciauto_setup_device(struct pci_controller *hose,
-			  pci_dev_t dev, int bars_num,
-			  struct pci_region *mem,
-			  struct pci_region *prefetch,
-			  struct pci_region *io)
-{
-	u32 bar_response;
-	pci_size_t bar_size;
-	u16 cmdstat = 0;
-	int bar, bar_nr = 0;
-	u8 header_type;
-	int rom_addr;
-	pci_addr_t bar_value;
-	struct pci_region *bar_res;
-	int found_mem64 = 0;
-	u16 class;
-
-	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
-	cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
-
-	for (bar = PCI_BASE_ADDRESS_0;
-		bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) {
-		/* Tickle the BAR and get the response */
-		pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
-		pci_hose_read_config_dword(hose, dev, bar, &bar_response);
-
-		/* If BAR is not implemented go to the next BAR */
-		if (!bar_response)
-			continue;
-
-		found_mem64 = 0;
-
-		/* Check the BAR type and set our address mask */
-		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
-			bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
-				   & 0xffff) + 1;
-			bar_res = io;
-
-			debug("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ",
-			      bar_nr, (unsigned long long)bar_size);
-		} else {
-			if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
-			     PCI_BASE_ADDRESS_MEM_TYPE_64) {
-				u32 bar_response_upper;
-				u64 bar64;
-
-				pci_hose_write_config_dword(hose, dev, bar + 4,
-					0xffffffff);
-				pci_hose_read_config_dword(hose, dev, bar + 4,
-					&bar_response_upper);
-
-				bar64 = ((u64)bar_response_upper << 32) | bar_response;
-
-				bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
-				found_mem64 = 1;
-			} else {
-				bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
-			}
-			if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
-				bar_res = prefetch;
-			else
-				bar_res = mem;
-
-			debug("PCI Autoconfig: BAR %d, %s, size=0x%llx, ",
-			      bar_nr, bar_res == prefetch ? "Prf" : "Mem",
-			      (unsigned long long)bar_size);
-		}
-
-		if (pciauto_region_allocate(bar_res, bar_size,
-					    &bar_value, found_mem64) == 0) {
-			/* Write it out and update our limit */
-			pci_hose_write_config_dword(hose, dev, bar, (u32)bar_value);
-
-			if (found_mem64) {
-				bar += 4;
-#ifdef CONFIG_SYS_PCI_64BIT
-				pci_hose_write_config_dword(hose, dev, bar, (u32)(bar_value>>32));
-#else
-				/*
-				 * If we are a 64-bit decoder then increment to the
-				 * upper 32 bits of the bar and force it to locate
-				 * in the lower 4GB of memory.
-				 */
-				pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
-#endif
-			}
-
-		}
-		cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
-			PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
-
-		debug("\n");
-
-		bar_nr++;
-	}
-
-	/* Configure the expansion ROM address */
-	pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
-	header_type &= 0x7f;
-	if (header_type != PCI_HEADER_TYPE_CARDBUS) {
-		rom_addr = (header_type == PCI_HEADER_TYPE_NORMAL) ?
-			   PCI_ROM_ADDRESS : PCI_ROM_ADDRESS1;
-		pci_hose_write_config_dword(hose, dev, rom_addr, 0xfffffffe);
-		pci_hose_read_config_dword(hose, dev, rom_addr, &bar_response);
-		if (bar_response) {
-			bar_size = -(bar_response & ~1);
-			debug("PCI Autoconfig: ROM, size=%#x, ",
-			      (unsigned int)bar_size);
-			if (pciauto_region_allocate(mem, bar_size,
-						    &bar_value, false) == 0) {
-				pci_hose_write_config_dword(hose, dev, rom_addr,
-							    bar_value);
-			}
-			cmdstat |= PCI_COMMAND_MEMORY;
-			debug("\n");
-		}
-	}
-
-	/* PCI_COMMAND_IO must be set for VGA device */
-	pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
-	if (class == PCI_CLASS_DISPLAY_VGA)
-		cmdstat |= PCI_COMMAND_IO;
-
-	pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat);
-	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
-		CONFIG_SYS_PCI_CACHE_LINE_SIZE);
-	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
-}
-
-void pciauto_prescan_setup_bridge(struct pci_controller *hose,
-					 pci_dev_t dev, int sub_bus)
-{
-	struct pci_region *pci_mem;
-	struct pci_region *pci_prefetch;
-	struct pci_region *pci_io;
-	u16 cmdstat, prefechable_64;
-
-	pci_mem = hose->pci_mem;
-	pci_prefetch = hose->pci_prefetch;
-	pci_io = hose->pci_io;
-
-	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
-	pci_hose_read_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
-				&prefechable_64);
-	prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
-
-	/* Configure bus number registers */
-	pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS,
-				   PCI_BUS(dev) - hose->first_busno);
-	pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS,
-				   sub_bus - hose->first_busno);
-	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);
-
-	if (pci_mem) {
-		/* Round memory allocator to 1MB boundary */
-		pciauto_region_align(pci_mem, 0x100000);
-
-		/* Set up memory and I/O filter limits, assume 32-bit I/O space */
-		pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE,
-					(pci_mem->bus_lower & 0xfff00000) >> 16);
-
-		cmdstat |= PCI_COMMAND_MEMORY;
-	}
-
-	if (pci_prefetch) {
-		/* Round memory allocator to 1MB boundary */
-		pciauto_region_align(pci_prefetch, 0x100000);
-
-		/* Set up memory and I/O filter limits, assume 32-bit I/O space */
-		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
-					(pci_prefetch->bus_lower & 0xfff00000) >> 16);
-		if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
-#ifdef CONFIG_SYS_PCI_64BIT
-			pci_hose_write_config_dword(hose, dev,
-					PCI_PREF_BASE_UPPER32,
-					pci_prefetch->bus_lower >> 32);
-#else
-			pci_hose_write_config_dword(hose, dev,
-					PCI_PREF_BASE_UPPER32,
-					0x0);
-#endif
-
-		cmdstat |= PCI_COMMAND_MEMORY;
-	} else {
-		/* We don't support prefetchable memory for now, so disable */
-		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
-		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
-		if (prefechable_64 == PCI_PREF_RANGE_TYPE_64) {
-			pci_hose_write_config_word(hose, dev, PCI_PREF_BASE_UPPER32, 0x0);
-			pci_hose_write_config_word(hose, dev, PCI_PREF_LIMIT_UPPER32, 0x0);
-		}
-	}
-
-	if (pci_io) {
-		/* Round I/O allocator to 4KB boundary */
-		pciauto_region_align(pci_io, 0x1000);
-
-		pci_hose_write_config_byte(hose, dev, PCI_IO_BASE,
-					(pci_io->bus_lower & 0x0000f000) >> 8);
-		pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16,
-					(pci_io->bus_lower & 0xffff0000) >> 16);
-
-		cmdstat |= PCI_COMMAND_IO;
-	}
-
-	/* Enable memory and I/O accesses, enable bus master */
-	pci_hose_write_config_word(hose, dev, PCI_COMMAND,
-					cmdstat | PCI_COMMAND_MASTER);
-}
-
-void pciauto_postscan_setup_bridge(struct pci_controller *hose,
-					  pci_dev_t dev, int sub_bus)
-{
-	struct pci_region *pci_mem;
-	struct pci_region *pci_prefetch;
-	struct pci_region *pci_io;
-
-	pci_mem = hose->pci_mem;
-	pci_prefetch = hose->pci_prefetch;
-	pci_io = hose->pci_io;
-
-	/* Configure bus number registers */
-	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS,
-				   sub_bus - hose->first_busno);
-
-	if (pci_mem) {
-		/* Round memory allocator to 1MB boundary */
-		pciauto_region_align(pci_mem, 0x100000);
-
-		pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT,
-				(pci_mem->bus_lower - 1) >> 16);
-	}
-
-	if (pci_prefetch) {
-		u16 prefechable_64;
-
-		pci_hose_read_config_word(hose, dev,
-					PCI_PREF_MEMORY_LIMIT,
-					&prefechable_64);
-		prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
-
-		/* Round memory allocator to 1MB boundary */
-		pciauto_region_align(pci_prefetch, 0x100000);
-
-		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT,
-				(pci_prefetch->bus_lower - 1) >> 16);
-		if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
-#ifdef CONFIG_SYS_PCI_64BIT
-			pci_hose_write_config_dword(hose, dev,
-					PCI_PREF_LIMIT_UPPER32,
-					(pci_prefetch->bus_lower - 1) >> 32);
-#else
-			pci_hose_write_config_dword(hose, dev,
-					PCI_PREF_LIMIT_UPPER32,
-					0x0);
-#endif
-	}
-
-	if (pci_io) {
-		/* Round I/O allocator to 4KB boundary */
-		pciauto_region_align(pci_io, 0x1000);
-
-		pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT,
-				((pci_io->bus_lower - 1) & 0x0000f000) >> 8);
-		pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16,
-				((pci_io->bus_lower - 1) & 0xffff0000) >> 16);
-	}
-}
-
-
-/*
- * HJF: Changed this to return int. I think this is required
- * to get the correct result when scanning bridges
- */
-int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
-{
-	struct pci_region *pci_mem;
-	struct pci_region *pci_prefetch;
-	struct pci_region *pci_io;
-	unsigned int sub_bus = PCI_BUS(dev);
-	unsigned short class;
-	int n;
-
-	pci_mem = hose->pci_mem;
-	pci_prefetch = hose->pci_prefetch;
-	pci_io = hose->pci_io;
-
-	pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
-
-	switch (class) {
-	case PCI_CLASS_BRIDGE_PCI:
-		debug("PCI Autoconfig: Found P2P bridge, device %d\n",
-		      PCI_DEV(dev));
-
-		pciauto_setup_device(hose, dev, 2, pci_mem,
-				     pci_prefetch, pci_io);
-
-		/* Passing in current_busno allows for sibling P2P bridges */
-		hose->current_busno++;
-		pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
-		/*
-		 * need to figure out if this is a subordinate bridge on the bus
-		 * to be able to properly set the pri/sec/sub bridge registers.
-		 */
-		n = pci_hose_scan_bus(hose, hose->current_busno);
-
-		/* figure out the deepest we've gone for this leg */
-		sub_bus = max((unsigned int)n, sub_bus);
-		pciauto_postscan_setup_bridge(hose, dev, sub_bus);
-
-		sub_bus = hose->current_busno;
-		break;
-
-	case PCI_CLASS_BRIDGE_CARDBUS:
-		/*
-		 * just do a minimal setup of the bridge,
-		 * let the OS take care of the rest
-		 */
-		pciauto_setup_device(hose, dev, 0, pci_mem,
-				     pci_prefetch, pci_io);
-
-		debug("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
-		      PCI_DEV(dev));
-
-		hose->current_busno++;
-		break;
-
-#if defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE)
-	case PCI_CLASS_BRIDGE_OTHER:
-		debug("PCI Autoconfig: Skipping bridge device %d\n",
-		      PCI_DEV(dev));
-		break;
-#endif
-#if defined(CONFIG_ARCH_MPC834X) && !defined(CONFIG_TARGET_VME8349) && \
-		!defined(CONFIG_TARGET_CADDY2)
-	case PCI_CLASS_BRIDGE_OTHER:
-		/*
-		 * The host/PCI bridge 1 seems broken in 8349 - it presents
-		 * itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_
-		 * device claiming resources io/mem/irq.. we only allow for
-		 * the PIMMR window to be allocated (BAR0 - 1MB size)
-		 */
-		debug("PCI Autoconfig: Broken bridge found, only minimal config\n");
-		pciauto_setup_device(hose, dev, 0, hose->pci_mem,
-			hose->pci_prefetch, hose->pci_io);
-		break;
-#endif
-
-	case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */
-		debug("PCI AutoConfig: Found PowerPC device\n");
-
-	default:
-		pciauto_setup_device(hose, dev, 6, pci_mem,
-				     pci_prefetch, pci_io);
-		break;
-	}
-
-	return sub_bus;
-}
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index f697573..ab1d061 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -34,8 +34,8 @@ menuconfig USB
 if USB
 
 config DM_USB
-	bool "Enable driver model for USB"
-	depends on USB && DM
+	bool
+	depends on DM && OF_CONTROL
 	help
 	  Enable driver model for USB. The USB interface is then implemented
 	  by the USB uclass. Multiple USB controllers of different types
@@ -48,7 +48,7 @@ config DM_USB
 	  automatically probed when found on the bus.
 
 config SPL_DM_USB
-	bool "Enable driver model for USB in SPL"
+	bool "Enable driver model for USB host most in SPL"
 	depends on SPL_DM && DM_USB
 	default y
 
@@ -84,6 +84,8 @@ source "drivers/usb/phy/Kconfig"
 
 source "drivers/usb/ulpi/Kconfig"
 
+if USB_HOST
+
 comment "USB peripherals"
 
 config USB_STORAGE
@@ -129,8 +131,10 @@ endchoice
 
 endif
 
-source "drivers/usb/gadget/Kconfig"
-
 source "drivers/usb/eth/Kconfig"
 
 endif
+
+source "drivers/usb/gadget/Kconfig"
+
+endif
diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
index 4cf59c7..05785fc 100644
--- a/drivers/usb/cdns3/Kconfig
+++ b/drivers/usb/cdns3/Kconfig
@@ -1,6 +1,6 @@
 config USB_CDNS3
 	tristate "Cadence USB3 Dual-Role Controller"
-	depends on USB_HOST || USB_GADGET
+	depends on USB_XHCI_HCD || USB_GADGET
 	help
 	  Say Y here if your system has a Cadence USB3 dual-role controller.
 	  It supports: Host-only, and Peripheral-only.
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 802ee50..93707e0 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -1,6 +1,6 @@
 config USB_DWC3
 	bool "DesignWare USB3 DRD Core Support"
-	depends on USB_HOST || USB_GADGET
+	depends on USB_XHCI_HCD || USB_GADGET
 	help
 	  Say Y here if your system has a Dual Role SuperSpeed
 	  USB controller based on the DesignWare USB3 IP Core.
diff --git a/drivers/usb/emul/Kconfig b/drivers/usb/emul/Kconfig
index ae1ab23..279f6c6 100644
--- a/drivers/usb/emul/Kconfig
+++ b/drivers/usb/emul/Kconfig
@@ -1,6 +1,8 @@
 config USB_EMUL
 	bool "Support for USB device emulation"
-	depends on DM_USB && SANDBOX
+	depends on SANDBOX
+	select DM_USB
+	select USB_HOST
 	help
 	  Since sandbox does not have access to a real USB bus, it is possible
 	  to use device emulators instead. This allows testing of the USB
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 4a3b22e..327ea86 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -15,6 +15,8 @@
 
 menuconfig USB_GADGET
 	bool "USB Gadget Support"
+	depends on DM
+	select DM_USB
 	help
 	   USB is a master/slave protocol, organized with one master
 	   host (such as a PC) controlling up to 127 peripheral devices.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index f34cba2..427b360 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -5,9 +5,11 @@ comment "USB Host Controller Drivers"
 
 config USB_HOST
 	bool
+	select DM_USB
 
 config USB_XHCI_HCD
 	bool "xHCI HCD (USB 3.0) support"
+	depends on DM && OF_CONTROL
 	select USB_HOST
 	---help---
 	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
@@ -107,6 +109,7 @@ endif # USB_XHCI_HCD
 config USB_EHCI_HCD
 	bool "EHCI HCD (USB 2.0) support"
 	default y if ARCH_MX5 || ARCH_MX6
+	depends on DM && OF_CONTROL
 	select USB_HOST
 	---help---
 	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
@@ -217,7 +220,6 @@ config USB_EHCI_ZYNQ
 
 config USB_EHCI_GENERIC
 	bool "Support for generic EHCI USB controller"
-	depends on OF_CONTROL
 	depends on DM_USB
 	default ARCH_SUNXI
 	default n
@@ -234,6 +236,8 @@ endif # USB_EHCI_HCD
 
 config USB_OHCI_HCD
 	bool "OHCI HCD (USB 1.1) support"
+	depends on DM && OF_CONTROL
+	select USB_HOST
 	---help---
 	  The Open Host Controller Interface (OHCI) is a standard for accessing
 	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
@@ -244,21 +248,17 @@ config USB_OHCI_HCD
 	  based system where you're not sure, the "lspci -v" entry will list the
 	  right "prog-if" for your USB controller(s):  EHCI, OHCI, or UHCI.
 
+if USB_OHCI_HCD
+
 config USB_OHCI_PCI
 	bool "Support for PCI-based OHCI USB controller"
-	depends on DM_USB
-	default n
+	depends on PCI
 	help
 	  Enables support for the PCI-based OHCI controller.
 
-if USB_OHCI_HCD
-
 config USB_OHCI_GENERIC
 	bool "Support for generic OHCI USB controller"
-	depends on OF_CONTROL
-	depends on DM_USB
 	default ARCH_SUNXI
-	select USB_HOST
 	---help---
 	  Enables support for generic OHCI controller.
 
@@ -289,6 +289,7 @@ endif # USB_UHCI_HCD
 
 config USB_DWC2
 	bool "DesignWare USB2 Core support"
+	depends on DM && OF_CONTROL
 	select USB_HOST
 	---help---
 	  The DesignWare USB 2.0 controller is compliant with the
@@ -311,8 +312,7 @@ endif # USB_DWC2
 
 config USB_R8A66597_HCD
 	bool "Renesas R8A66597 USB Core support"
-	depends on OF_CONTROL
-	depends on DM_USB
+	depends on DM && OF_CONTROL
 	select USB_HOST
 	---help---
 	  This enables support for the on-chip Renesas R8A66597 USB 2.0
diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig
index a2a5991..5ec498e 100644
--- a/drivers/usb/mtu3/Kconfig
+++ b/drivers/usb/mtu3/Kconfig
@@ -4,7 +4,7 @@
 
 config USB_MTU3
 	bool "MediaTek USB3 Dual Role controller"
-	depends on USB_HOST || USB_GADGET
+	depends on USB_XHCI_HCD || USB_GADGET
 	depends on ARCH_MEDIATEK
 	help
 	  Say Y here if your system runs on MediaTek SoCs with
diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig
index 81ceea9..a9a7c26 100644
--- a/drivers/usb/musb-new/Kconfig
+++ b/drivers/usb/musb-new/Kconfig
@@ -5,22 +5,26 @@ comment "MUSB Controller Driver"
 
 config USB_MUSB_HOST
 	bool "MUSB host mode support"
+	depends on DM && OF_CONTROL
 	select SPL_SPRINTF if SPL
 	select TPL_SPRINTF if TPL
+	select USB_HOST
 	help
 	  Enables the MUSB USB dual-role controller in host mode.
 
 config USB_MUSB_GADGET
 	bool "MUSB gadget mode support"
+	depends on USB_GADGET
 	select USB_GADGET_DUALSPEED
 	select SPL_SPRINTF if SPL
 	select TPL_SPRINTF if TPL
 	help
 	  Enables the MUSB USB dual-role controller in gadget mode.
 
+if USB_MUSB_HOST || USB_MUSB_GADGET
 config USB_MUSB_DA8XX
 	bool "Enable DA8xx MUSB Controller"
-	depends on DM_USB
+	depends on ARCH_DAVINCI
 	help
 	  Say y here to enable support for the dual role high
 	  speed USB controller based on the Mentor Graphics
@@ -28,7 +32,7 @@ config USB_MUSB_DA8XX
 
 config USB_MUSB_TI
 	bool "Enable TI OTG USB controller"
-	depends on DM_USB
+	depends on AM33XX
 	select USB_MUSB_DSPS
 	default n
 	help
@@ -46,10 +50,9 @@ config USB_MUSB_AM35X
 config USB_MUSB_DSPS
 	bool "TI DSPS platforms"
 
-if USB_MUSB_HOST || USB_MUSB_GADGET
 config USB_MUSB_MT85XX
 	bool "Enable Mediatek MT85XX DRC USB controller"
-	depends on DM_USB && ARCH_MEDIATEK
+	depends on ARCH_MEDIATEK
 	default n
 	help
 	  Say y to enable Mediatek MT85XX USB DRC controller support
@@ -59,7 +62,7 @@ config USB_MUSB_MT85XX
 
 config USB_MUSB_PIC32
 	bool "Enable Microchip PIC32 DRC USB controller"
-	depends on DM_USB && MACH_PIC32
+	depends on MACH_PIC32
 	help
 	  Say y to enable PIC32 USB DRC controller support
 	  if it is available on your Microchip PIC32 platform.
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
deleted file mode 100644
index 0428be7..0000000
--- a/include/configs/M52277EVB.h
+++ /dev/null
@@ -1,243 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Freescale MCF52277 EVB board.
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef _M52277EVB_H
-#define _M52277EVB_H
-
-#include <linux/stringify.h>
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT		(0)
-
-#undef CONFIG_WATCHDOG
-
-#define CONFIG_TIMESTAMP	/* Print image info with timestamp */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_HOSTNAME			"M52277EVB"
-#define CONFIG_SYS_UBOOT_END		0x3FFFF
-#define	CONFIG_SYS_LOAD_ADDR2		0x40010007
-#ifdef CONFIG_SYS_STMICRO_BOOT
-/* ST Micro serial flash */
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=0x40010000\0"			\
-	"uboot=u-boot.bin\0"			\
-	"load=loadb ${loadaddr} ${baudrate};"	\
-	"loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"	\
-	"upd=run load; run prog\0"		\
-	"prog=sf probe 0:2 10000 1;"		\
-	"sf erase 0 30000;"			\
-	"sf write ${loadaddr} 0 30000;"		\
-	"save\0"				\
-	""
-#endif
-#ifdef CONFIG_SYS_SPANSION_BOOT
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=0x40010000\0"			\
-	"uboot=u-boot.bin\0"			\
-	"load=loadb ${loadaddr} ${baudrate}\0"	\
-	"upd=run load; run prog\0"		\
-	"prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE)	\
-	" " __stringify(CONFIG_SYS_UBOOT_END) ";"		\
-	"era " __stringify(CONFIG_SYS_FLASH_BASE) " "		\
-	__stringify(CONFIG_SYS_UBOOT_END) ";"			\
-	"cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE)	\
-	" ${filesize}; save\0"			\
-	"updsbf=run loadsbf; run progsbf\0"	\
-	"loadsbf=loadb ${loadaddr} ${baudrate};"	\
-	"loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"	\
-	"progsbf=sf probe 0:2 10000 1;"		\
-	"sf erase 0 30000;"			\
-	"sf write ${loadaddr} 0 30000;"		\
-	""
-#endif
-
-/* LCD */
-#ifdef CONFIG_CMD_BMP
-#define CONFIG_LCD_LOGO
-#define CONFIG_SHARP_LQ035Q7DH06
-#endif
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_REGS_BASE	0xFC0B0000
-#define CONFIG_SYS_USB_EHCI_CPU_INIT
-#endif
-
-/* Realtime clock */
-#define CONFIG_MCFRTC
-#undef RTC_DEBUG
-#define CONFIG_SYS_RTC_OSCILLATOR	(32 * CONFIG_SYS_HZ)
-
-/* Timer */
-#define CONFIG_MCFTMR
-
-/* I2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	80000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
-#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
-
-/* DSPI and Serial Flash */
-#define CONFIG_CF_DSPI
-#define CONFIG_SYS_SBFHDR_SIZE		0x7
-
-/* Input, PCI, Flexbus, and VCO */
-#define CONFIG_EXTRA_CLOCK
-
-#define CONFIG_SYS_INPUT_CLKSRC	16000000
-
-#define CONFIG_PRAM		2048	/* 2048 KB */
-
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x10000)
-
-#define CONFIG_SYS_MBAR		0xFC000000
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
-#define CONFIG_SYS_INIT_RAM_SIZE		0x8000	/* Size of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM_CTRL	0x221
-#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 32)
-#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - 32)
-
-/*
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
-#define CONFIG_SYS_SDRAM_SIZE		64	/* SDRAM size in MB */
-#define CONFIG_SYS_SDRAM_CFG1		0x43711630
-#define CONFIG_SYS_SDRAM_CFG2		0x56670000
-#define CONFIG_SYS_SDRAM_CTRL		0xE1092000
-#define CONFIG_SYS_SDRAM_EMOD		0x81810000
-#define CONFIG_SYS_SDRAM_MODE		0x00CD0000
-#define CONFIG_SYS_SDRAM_DRV_STRENGTH	0x00
-
-#ifdef CONFIG_CF_SBF
-#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_TEXT_BASE + 0x400)
-#else
-#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
-
-/* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-#define CONFIG_SYS_BOOTM_LEN		(CONFIG_SYS_SDRAM_SIZE << 20)
-
-/*
- * Configuration for environment
- * Environment is not embedded in u-boot. First time runing may have env
- * crc error warning if there is no correct environment on the flash.
- */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#ifdef CONFIG_SYS_STMICRO_BOOT
-#	define CONFIG_SYS_FLASH_BASE	CONFIG_SYS_CS0_BASE
-#	define CONFIG_SYS_FLASH0_BASE	CONFIG_SYS_CS0_BASE
-#endif
-#ifdef CONFIG_SYS_SPANSION_BOOT
-#	define CONFIG_SYS_FLASH_BASE	CONFIG_SYS_CS0_BASE
-#	define CONFIG_SYS_FLASH0_BASE	CONFIG_SYS_CS0_BASE
-#endif
-
-#ifdef CONFIG_SYS_FLASH_CFI
-#	define CONFIG_FLASH_SPANSION_S29WS_N	1
-#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
-#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CONFIG_SYS_FLASH_CHECKSUM
-#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE }
-#endif
-
-#define LDS_BOARD_TEXT \
-        arch/m68k/cpu/mcf5227x/built-in.o   (.text*) \
-	arch/m68k/lib/built-in.o            (.text*)
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-#ifdef CONFIG_CMD_JFFS2
-#	define CONFIG_JFFS2_DEV		"nor0"
-#	define CONFIG_JFFS2_PART_SIZE	(0x01000000 - 0x40000)
-#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH0_BASE + 0x40000)
-#endif
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16
-
-#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV | CF_CACR_INVI)
-#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
-					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
-					 CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CINV | \
-					 CF_CACR_DISD | CF_CACR_INVI | \
-					 CF_CACR_CEIB | CF_CACR_DCM | \
-					 CF_CACR_EUSP)
-
-/*-----------------------------------------------------------------------
- * Memory bank definitions
- */
-/*
- * CS0 - NOR Flash
- * CS1 - Available
- * CS2 - Available
- * CS3 - Available
- * CS4 - Available
- * CS5 - Available
- */
-
-#ifdef CONFIG_CF_SBF
-#define CONFIG_SYS_CS0_BASE		0x04000000
-#define CONFIG_SYS_CS0_MASK		0x00FF0001
-#define CONFIG_SYS_CS0_CTRL		0x00001FA0
-#else
-#define CONFIG_SYS_CS0_BASE		0x00000000
-#define CONFIG_SYS_CS0_MASK		0x00FF0001
-#define CONFIG_SYS_CS0_CTRL		0x00001FA0
-#endif
-
-#endif				/* _M52277EVB_H */
diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h
deleted file mode 100644
index 5447f84..0000000
--- a/include/configs/M54418TWR.h
+++ /dev/null
@@ -1,283 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Freescale MCF54418 TWR board.
- *
- * Copyright 2010-2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef _M54418TWR_H
-#define _M54418TWR_H
-
-#include <linux/stringify.h>
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT		(0)
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
-
-#define LDS_BOARD_TEXT			board/freescale/m54418twr/sbf_dram_init.o (.text*)
-
-#undef CONFIG_WATCHDOG
-
-#define CONFIG_TIMESTAMP	/* Print image info with timestamp */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * NAND FLASH
- */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_JFFS2_NAND
-#define CONFIG_NAND_FSL_NFC
-#define CONFIG_SYS_NAND_BASE		0xFC0FC000
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS			CONFIG_SYS_MAX_NAND_DEVICE
-#define CONFIG_SYS_NAND_SELECT_DEVICE
-#endif
-
-/* Network configuration */
-#ifdef CONFIG_MCFFEC
-#define CONFIG_MII_INIT		1
-#define CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_SYS_RX_ETH_BUFFER	2
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_SYS_TX_ETH_BUFFER	2
-#define CONFIG_HAS_ETH1
-
-#define CONFIG_ETHPRIME	"FEC0"
-#define CONFIG_IPADDR		192.168.1.2
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_SERVERIP	192.168.1.1
-#define CONFIG_GATEWAYIP	192.168.1.1
-
-#define CONFIG_SYS_FEC_BUF_USE_SRAM
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#ifndef CONFIG_SYS_DISCOVER_PHY
-#define FECDUPLEX	FULL
-#define FECSPEED	_100BASET
-#define LINKSTATUS	1
-#else
-#define LINKSTATUS	0
-#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#endif
-#endif			/* CONFIG_SYS_DISCOVER_PHY */
-#endif
-
-#define CONFIG_HOSTNAME		"M54418TWR"
-
-#if defined(CONFIG_CF_SBF)
-/* ST Micro serial flash */
-#define	CONFIG_SYS_LOAD_ADDR2		0x40010007
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"netdev=eth0\0"				\
-	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=0x40010000\0"			\
-	"sbfhdr=sbfhdr.bin\0"			\
-	"uboot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr} ${sbfhdr};"	\
-	"tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"	\
-	"upd=run load; run prog\0"		\
-	"prog=sf probe 0:1 1000000 3;"		\
-	"sf erase 0 40000;"			\
-	"sf write ${loadaddr} 0 40000;"		\
-	"save\0"				\
-	""
-#elif defined(CONFIG_SYS_NAND_BOOT)
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"netdev=eth0\0"				\
-	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=0x40010000\0"			\
-	"u-boot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr} ${u-boot};\0"	\
-	"upd=run load; run prog\0"		\
-	"prog=nand device 0;"			\
-	"nand erase 0 40000;"			\
-	"nb_update ${loadaddr} ${filesize};"	\
-	"save\0"				\
-	""
-#else
-#define CONFIG_SYS_UBOOT_END	0x3FFFF
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"netdev=eth0\0"				\
-	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=40010000\0"			\
-	"u-boot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr) ${u-boot}\0"	\
-	"upd=run load; run prog\0"		\
-	"prog=prot off mram" " ;"	\
-	"cp.b ${loadaddr} 0 ${filesize};"	\
-	"save\0"				\
-	""
-#endif
-
-/* Realtime clock */
-#undef CONFIG_MCFRTC
-#define CONFIG_RTC_MCFRRTC
-#define CONFIG_SYS_MCFRRTC_BASE		0xFC0A8000
-
-/* Timer */
-#define CONFIG_MCFTMR
-
-/* I2c */
-#undef CONFIG_SYS_FSL_I2C
-#undef	CONFIG_SYS_I2C_SOFT	/* I2C bit-banged */
-/* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
-#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
-
-/* DSPI and Serial Flash */
-#define CONFIG_CF_DSPI
-#define CONFIG_SERIAL_FLASH
-#define CONFIG_SYS_SBFHDR_SIZE		0x7
-
-/* Input, PCI, Flexbus, and VCO */
-#define CONFIG_EXTRA_CLOCK
-
-#define CONFIG_PRAM			2048	/* 2048 KB */
-
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
-
-#define CONFIG_SYS_MBAR		0xFC000000
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
-/* End of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
-#define CONFIG_SYS_INIT_RAM_CTRL	0x221
-#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE) - 32)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - 32)
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
-#define CONFIG_SYS_SDRAM_SIZE		128	/* SDRAM size in MB */
-
-#define CONFIG_SYS_DRAM_TEST
-
-#if defined(CONFIG_CF_SBF) || defined(CONFIG_SYS_NAND_BOOT)
-#define CONFIG_SERIAL_BOOT
-#endif
-
-#if defined(CONFIG_SERIAL_BOOT)
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_TEXT_BASE + 0x400)
-#else
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
-#define CONFIG_SYS_BOOTPARAMS_LEN	(64 * 1024)
-/* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
-/* Reserve 256 kB for malloc() */
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization ??
- */
-/* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \
-				(CONFIG_SYS_SDRAM_SIZE << 20))
-
-/* Configuration for environment
- * Environment is embedded in u-boot in the second sector of the flash
- */
-
-/* FLASH organization */
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
-
-#ifdef CONFIG_SYS_FLASH_CFI
-
-/* Max size that the board might have */
-#define CONFIG_SYS_FLASH_SIZE		0x1000000
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT	270
-/* "Real" (hardware) sectors protection */
-#define CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE }
-#else
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT	270
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS	0
-#endif
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-#ifdef CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_DEV		"nand0"
-#define CONFIG_JFFS2_PART_OFFSET	(0x800000)
-
-#endif
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE	16
-#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV		(CF_CACR_BCINVA + CF_CACR_ICINVA)
-#define CONFIG_SYS_DCACHE_INV		(CF_CACR_DCINVA)
-#define CONFIG_SYS_CACHE_ACR2		(CONFIG_SYS_SDRAM_BASE | \
-					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
-					 CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_BEC | CF_CACR_IEC | \
-					 CF_CACR_ICINVA | CF_CACR_EUSP)
-#define CONFIG_SYS_CACHE_DCACR		((CONFIG_SYS_CACHE_ICACR | \
-					 CF_CACR_DEC | CF_CACR_DDCM_P | \
-					 CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
-
-#define CACR_STATUS	(CONFIG_SYS_INIT_RAM_ADDR + \
-			CONFIG_SYS_INIT_RAM_SIZE - 12)
-
-/*-----------------------------------------------------------------------
- * Memory bank definitions
- */
-/*
- * CS0 - NOR Flash 16MB
- * CS1 - Available
- * CS2 - Available
- * CS3 - Available
- * CS4 - Available
- * CS5 - Available
- */
-
- /* Flash */
-#define CONFIG_SYS_CS0_BASE		0x00000000
-#define CONFIG_SYS_CS0_MASK		0x000F0101
-#define CONFIG_SYS_CS0_CTRL		0x00001D60
-
-#endif				/* _M54418TWR_H */
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
deleted file mode 100644
index f5bafb7..0000000
--- a/include/configs/M54451EVB.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Freescale MCF54451 EVB board.
- *
- * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef _M54451EVB_H
-#define _M54451EVB_H
-
-#include <linux/stringify.h>
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_M54451EVB	/* M54451EVB board */
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT		(0)
-
-#define LDS_BOARD_TEXT                  board/freescale/m54451evb/sbf_dram_init.o (.text*)
-
-#undef CONFIG_WATCHDOG
-
-#define CONFIG_TIMESTAMP	/* Print image info with timestamp */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* Network configuration */
-#ifdef CONFIG_MCFFEC
-#	define CONFIG_MII_INIT		1
-#	define CONFIG_SYS_DISCOVER_PHY
-#	define CONFIG_SYS_RX_ETH_BUFFER	8
-#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#	define CONFIG_ETHPRIME		"FEC0"
-#	define CONFIG_IPADDR		192.162.1.2
-#	define CONFIG_NETMASK		255.255.255.0
-#	define CONFIG_SERVERIP		192.162.1.1
-#	define CONFIG_GATEWAYIP		192.162.1.1
-
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CONFIG_SYS_DISCOVER_PHY
-#		define FECDUPLEX	FULL
-#		define FECSPEED		_100BASET
-#	else
-#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#		endif
-#	endif			/* CONFIG_SYS_DISCOVER_PHY */
-#endif
-
-#define CONFIG_HOSTNAME		"M54451EVB"
-#ifdef CONFIG_SYS_STMICRO_BOOT
-/* ST Micro serial flash */
-#define	CONFIG_SYS_LOAD_ADDR2		0x40010007
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"netdev=eth0\0"				\
-	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=0x40010000\0"			\
-	"sbfhdr=sbfhdr.bin\0"			\
-	"uboot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr} ${sbfhdr};"	\
-	"tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"	\
-	"upd=run load; run prog\0"		\
-	"prog=sf probe 0:1 1000000 3;"		\
-	"sf erase 0 30000;"			\
-	"sf write ${loadaddr} 0 30000;"		\
-	"save\0"				\
-	""
-#else
-#define CONFIG_SYS_UBOOT_END	0x3FFFF
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"netdev=eth0\0"				\
-	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=40010000\0"			\
-	"u-boot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr) ${u-boot}\0"	\
-	"upd=run load; run prog\0"		\
-	"prog=prot off 0 " __stringify(CONFIG_SYS_UBOOT_END)	\
-	"; era 0 " __stringify(CONFIG_SYS_UBOOT_END) " ;"	\
-	"cp.b ${loadaddr} 0 ${filesize};"	\
-	"save\0"				\
-	""
-#endif
-
-/* Realtime clock */
-#define CONFIG_MCFRTC
-#undef RTC_DEBUG
-#define CONFIG_SYS_RTC_OSCILLATOR	(32 * CONFIG_SYS_HZ)
-
-/* Timer */
-#define CONFIG_MCFTMR
-
-/* I2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	80000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
-#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
-
-/* DSPI and Serial Flash */
-#define CONFIG_CF_DSPI
-#define CONFIG_SERIAL_FLASH
-#define CONFIG_SYS_SBFHDR_SIZE		0x7
-
-/* Input, PCI, Flexbus, and VCO */
-#define CONFIG_EXTRA_CLOCK
-
-#define CONFIG_PRAM			2048	/* 2048 KB */
-
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
-
-#define CONFIG_SYS_MBAR			0xFC000000
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
-#define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* Size of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM_CTRL	0x221
-#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - 32)
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
-#define CONFIG_SYS_SDRAM_SIZE		128	/* SDRAM size in MB */
-#define CONFIG_SYS_SDRAM_CFG1		0x33633F30
-#define CONFIG_SYS_SDRAM_CFG2		0x57670000
-#define CONFIG_SYS_SDRAM_CTRL		0xE20D2C00
-#define CONFIG_SYS_SDRAM_EMOD		0x80810000
-#define CONFIG_SYS_SDRAM_MODE		0x008D0000
-#define CONFIG_SYS_SDRAM_DRV_STRENGTH	0x44
-
-#ifdef CONFIG_CF_SBF
-#	define CONFIG_SERIAL_BOOT
-#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_TEXT_BASE + 0x400)
-#else
-#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-
-/* Reserve 256 kB for malloc() */
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization ??
- */
-/* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-
-/* Configuration for environment
- * Environment is not embedded in u-boot. First time runing may have env
- * crc error warning if there is no correct environment on the flash.
- */
-
-/* FLASH organization */
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
-
-#ifdef CONFIG_SYS_FLASH_CFI
-
-#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
-#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CONFIG_SYS_FLASH_CHECKSUM
-#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE }
-
-#endif
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-#ifdef CONFIG_CMD_JFFS2
-#	define CONFIG_JFFS2_DEV		"nor0"
-#	define CONFIG_JFFS2_PART_SIZE	0x01000000
-#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH0_BASE + 0x500000)
-#endif
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE		16
-
-#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV		(CF_CACR_BCINVA + CF_CACR_ICINVA)
-#define CONFIG_SYS_DCACHE_INV		(CF_CACR_DCINVA)
-#define CONFIG_SYS_CACHE_ACR2		(CONFIG_SYS_SDRAM_BASE | \
-					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
-					 CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_BEC | CF_CACR_IEC | \
-					 CF_CACR_ICINVA | CF_CACR_EUSP)
-#define CONFIG_SYS_CACHE_DCACR		((CONFIG_SYS_CACHE_ICACR | \
-					 CF_CACR_DEC | CF_CACR_DDCM_P | \
-					 CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
-
-/*-----------------------------------------------------------------------
- * Memory bank definitions
- */
-/*
- * CS0 - NOR Flash 16MB
- * CS1 - Available
- * CS2 - Available
- * CS3 - Available
- * CS4 - Available
- * CS5 - Available
- */
-
- /* Flash */
-#define CONFIG_SYS_CS0_BASE		0x00000000
-#define CONFIG_SYS_CS0_MASK		0x00FF0001
-#define CONFIG_SYS_CS0_CTRL		0x00004D80
-
-#define CONFIG_SYS_SPANSION_BASE	CONFIG_SYS_CS0_BASE
-
-#endif				/* _M54451EVB_H */
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
deleted file mode 100644
index f3621d6..0000000
--- a/include/configs/M54455EVB.h
+++ /dev/null
@@ -1,356 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Freescale MCF54455 EVB board.
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef _M54455EVB_H
-#define _M54455EVB_H
-
-#include <linux/stringify.h>
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_M54455EVB	/* M54455EVB board */
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT		(0)
-
-#define LDS_BOARD_TEXT                  board/freescale/m54455evb/sbf_dram_init.o (.text*)
-
-#undef CONFIG_WATCHDOG
-
-#define CONFIG_TIMESTAMP	/* Print image info with timestamp */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* Network configuration */
-#ifdef CONFIG_MCFFEC
-#	define CONFIG_MII_INIT		1
-#	define CONFIG_SYS_DISCOVER_PHY
-#	define CONFIG_SYS_RX_ETH_BUFFER	8
-#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#	define CONFIG_HAS_ETH1
-#	define CONFIG_ETHPRIME		"FEC0"
-#	define CONFIG_IPADDR		192.162.1.2
-#	define CONFIG_NETMASK		255.255.255.0
-#	define CONFIG_SERVERIP		192.162.1.1
-#	define CONFIG_GATEWAYIP		192.162.1.1
-
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CONFIG_SYS_DISCOVER_PHY
-#		define FECDUPLEX	FULL
-#		define FECSPEED		_100BASET
-#	else
-#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#		endif
-#	endif			/* CONFIG_SYS_DISCOVER_PHY */
-#endif
-
-#define CONFIG_HOSTNAME		"M54455EVB"
-#ifdef CONFIG_SYS_STMICRO_BOOT
-/* ST Micro serial flash */
-#define	CONFIG_SYS_LOAD_ADDR2		0x40010013
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"netdev=eth0\0"				\
-	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=0x40010000\0"			\
-	"sbfhdr=sbfhdr.bin\0"			\
-	"uboot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr} ${sbfhdr};"	\
-	"tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"	\
-	"upd=run load; run prog\0"		\
-	"prog=sf probe 0:1 1000000 3;"		\
-	"sf erase 0 30000;"			\
-	"sf write ${loadaddr} 0 0x30000;"	\
-	"save\0"				\
-	""
-#else
-/* Atmel and Intel */
-#ifdef CONFIG_SYS_ATMEL_BOOT
-#	define CONFIG_SYS_UBOOT_END	0x0403FFFF
-#elif defined(CONFIG_SYS_INTEL_BOOT)
-#	define CONFIG_SYS_UBOOT_END	0x3FFFF
-#endif
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"netdev=eth0\0"				\
-	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=0x40010000\0"			\
-	"uboot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr} ${uboot}\0"	\
-	"upd=run load; run prog\0"		\
-	"prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE)	\
-	" " __stringify(CONFIG_SYS_UBOOT_END) ";"		\
-	"era " __stringify(CONFIG_SYS_FLASH_BASE) " "		\
-	__stringify(CONFIG_SYS_UBOOT_END) ";"			\
-	"cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE)	\
-	" ${filesize}; save\0"			\
-	""
-#endif
-
-/* ATA configuration */
-#define CONFIG_IDE_RESET	1
-#define CONFIG_IDE_PREINIT	1
-#define CONFIG_ATAPI
-#undef CONFIG_LBA48
-
-#define CONFIG_SYS_IDE_MAXBUS		1
-#define CONFIG_SYS_IDE_MAXDEVICE	2
-
-#define CONFIG_SYS_ATA_BASE_ADDR	0x90000000
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0
-
-#define CONFIG_SYS_ATA_DATA_OFFSET	0xA0	/* Offset for data I/O                            */
-#define CONFIG_SYS_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers           */
-#define CONFIG_SYS_ATA_STRIDE		4	/* Interval between registers                 */
-
-/* Realtime clock */
-#define CONFIG_MCFRTC
-#undef RTC_DEBUG
-#define CONFIG_SYS_RTC_OSCILLATOR	(32 * CONFIG_SYS_HZ)
-
-/* Timer */
-#define CONFIG_MCFTMR
-
-/* I2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	80000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
-#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
-
-/* DSPI and Serial Flash */
-#define CONFIG_CF_DSPI
-#define CONFIG_SYS_SBFHDR_SIZE		0x13
-
-/* PCI */
-#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
-
-#define CONFIG_SYS_PCI_CACHE_LINE_SIZE	4
-
-#define CONFIG_SYS_PCI_MEM_BUS		0xA0000000
-#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BUS
-#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000
-
-#define CONFIG_SYS_PCI_IO_BUS		0xB1000000
-#define CONFIG_SYS_PCI_IO_PHYS		CONFIG_SYS_PCI_IO_BUS
-#define CONFIG_SYS_PCI_IO_SIZE		0x01000000
-
-#define CONFIG_SYS_PCI_CFG_BUS		0xB0000000
-#define CONFIG_SYS_PCI_CFG_PHYS	CONFIG_SYS_PCI_CFG_BUS
-#define CONFIG_SYS_PCI_CFG_SIZE	0x01000000
-#endif
-
-/* FPGA - Spartan 2 */
-/* experiment
-#define CONFIG_FPGA_COUNT	1
-#define CONFIG_SYS_FPGA_PROG_FEEDBACK
-#define CONFIG_SYS_FPGA_CHECK_CTRLC
-*/
-
-/* Input, PCI, Flexbus, and VCO */
-#define CONFIG_EXTRA_CLOCK
-
-#define CONFIG_PRAM		2048	/* 2048 KB */
-
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
-
-#define CONFIG_SYS_MBAR		0xFC000000
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
-#define CONFIG_SYS_INIT_RAM_SIZE		0x8000	/* Size of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM_CTRL	0x221
-#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - 32)
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
-#define CONFIG_SYS_SDRAM_BASE1		0x48000000
-#define CONFIG_SYS_SDRAM_SIZE		256	/* SDRAM size in MB */
-#define CONFIG_SYS_SDRAM_CFG1		0x65311610
-#define CONFIG_SYS_SDRAM_CFG2		0x59670000
-#define CONFIG_SYS_SDRAM_CTRL		0xEA0B2000
-#define CONFIG_SYS_SDRAM_EMOD		0x40010000
-#define CONFIG_SYS_SDRAM_MODE		0x00010033
-#define CONFIG_SYS_SDRAM_DRV_STRENGTH	0xAA
-
-#ifdef CONFIG_CF_SBF
-#	define CONFIG_SERIAL_BOOT
-#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_TEXT_BASE + 0x400)
-#else
-#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-
-/* Reserve 256 kB for malloc() */
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization ??
- */
-/* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-
-/*
- * Configuration for environment
- * Environment is not embedded in u-boot. First time runing may have env
- * crc error warning if there is no correct environment on the flash.
- */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#ifdef CONFIG_SYS_STMICRO_BOOT
-#	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
-#	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS1_BASE
-#endif
-#ifdef CONFIG_SYS_ATMEL_BOOT
-#	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
-#	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS0_BASE
-#	define CONFIG_SYS_FLASH1_BASE		CONFIG_SYS_CS1_BASE
-#endif
-#ifdef CONFIG_SYS_INTEL_BOOT
-#	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
-#	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS0_BASE
-#	define CONFIG_SYS_FLASH1_BASE		CONFIG_SYS_CS1_BASE
-#endif
-
-#ifdef CONFIG_SYS_FLASH_CFI
-
-#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
-#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
-#	define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CONFIG_SYS_FLASH_CHECKSUM
-#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
-#	define CONFIG_FLASH_CFI_LEGACY
-
-#ifdef CONFIG_FLASH_CFI_LEGACY
-#	define CONFIG_SYS_ATMEL_REGION		4
-#	define CONFIG_SYS_ATMEL_TOTALSECT	11
-#	define CONFIG_SYS_ATMEL_SECT		{1, 2, 1, 7}
-#	define CONFIG_SYS_ATMEL_SECTSZ		{0x4000, 0x2000, 0x8000, 0x10000}
-#endif
-#endif
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-#ifdef CONFIG_CMD_JFFS2
-#ifdef CF_STMICRO_BOOT
-#	define CONFIG_JFFS2_DEV		"nor1"
-#	define CONFIG_JFFS2_PART_SIZE	0x01000000
-#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH2_BASE + 0x500000)
-#endif
-#ifdef CONFIG_SYS_ATMEL_BOOT
-#	define CONFIG_JFFS2_DEV		"nor1"
-#	define CONFIG_JFFS2_PART_SIZE	0x01000000
-#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH1_BASE + 0x500000)
-#endif
-#ifdef CONFIG_SYS_INTEL_BOOT
-#	define CONFIG_JFFS2_DEV		"nor0"
-#	define CONFIG_JFFS2_PART_SIZE	(0x01000000 - 0x500000)
-#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH0_BASE + 0x500000)
-#endif
-#endif
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE		16
-
-#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV		(CF_CACR_BCINVA + CF_CACR_ICINVA)
-#define CONFIG_SYS_DCACHE_INV		(CF_CACR_DCINVA)
-#define CONFIG_SYS_CACHE_ACR2		(CONFIG_SYS_SDRAM_BASE | \
-					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
-					 CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_BEC | CF_CACR_IEC | \
-					 CF_CACR_ICINVA | CF_CACR_EUSP)
-#define CONFIG_SYS_CACHE_DCACR		((CONFIG_SYS_CACHE_ICACR | \
-					 CF_CACR_DEC | CF_CACR_DDCM_P | \
-					 CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
-
-/*-----------------------------------------------------------------------
- * Memory bank definitions
- */
-/*
- * CS0 - NOR Flash 1, 2, 4, or 8MB
- * CS1 - CompactFlash and registers
- * CS2 - CPLD
- * CS3 - FPGA
- * CS4 - Available
- * CS5 - Available
- */
-
-#if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT)
- /* Atmel Flash */
-#define CONFIG_SYS_CS0_BASE		0x04000000
-#define CONFIG_SYS_CS0_MASK		0x00070001
-#define CONFIG_SYS_CS0_CTRL		0x00001140
-/* Intel Flash */
-#define CONFIG_SYS_CS1_BASE		0x00000000
-#define CONFIG_SYS_CS1_MASK		0x01FF0001
-#define CONFIG_SYS_CS1_CTRL		0x00000D60
-
-#define CONFIG_SYS_ATMEL_BASE		CONFIG_SYS_CS0_BASE
-#else
-/* Intel Flash */
-#define CONFIG_SYS_CS0_BASE		0x00000000
-#define CONFIG_SYS_CS0_MASK		0x01FF0001
-#define CONFIG_SYS_CS0_CTRL		0x00000D60
- /* Atmel Flash */
-#define CONFIG_SYS_CS1_BASE		0x04000000
-#define CONFIG_SYS_CS1_MASK		0x00070001
-#define CONFIG_SYS_CS1_CTRL		0x00001140
-
-#define CONFIG_SYS_ATMEL_BASE		CONFIG_SYS_CS1_BASE
-#endif
-
-/* CPLD */
-#define CONFIG_SYS_CS2_BASE		0x08000000
-#define CONFIG_SYS_CS2_MASK		0x00070001
-#define CONFIG_SYS_CS2_CTRL		0x003f1140
-
-/* FPGA */
-#define CONFIG_SYS_CS3_BASE		0x09000000
-#define CONFIG_SYS_CS3_MASK		0x00070001
-#define CONFIG_SYS_CS3_CTRL		0x00000020
-
-#endif				/* _M54455EVB_H */
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index c8e9d3b..2b61172 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -33,17 +33,6 @@
 #define CONFIG_LBA48
 #endif
 
-/* USB Configs */
-#ifdef CONFIG_USB
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS	0
-
-#define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#endif
-
 /* Serial Flash */
 
 #define CONFIG_LOADADDR	0x12000000
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 15ea0e4..1338ee3 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -142,7 +142,7 @@
 #endif
 
 /* USB */
-#ifdef CONFIG_USB
+#ifdef CONFIG_USB_HOST
 #define CONFIG_HAS_FSL_XHCI_USB
 #ifndef CONFIG_TARGET_LX2162AQDS
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h
index 2e7f49e..b372838 100644
--- a/include/configs/stm32mp1.h
+++ b/include/configs/stm32mp1.h
@@ -101,7 +101,7 @@
 #define BOOT_TARGET_UBIFS(func)
 #endif
 
-#ifdef CONFIG_USB
+#ifdef CONFIG_CMD_USB
 #define BOOT_TARGET_USB(func)	func(USB, usb, 0)
 #else
 #define BOOT_TARGET_USB(func)
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index fae0e76..dd7a75a 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -21,11 +21,18 @@
 #define CONFIG_SYS_NONCACHED_MEMORY	(1 << 20)	/* 1 MiB */
 
 #ifndef CONFIG_SPL_BUILD
+
+#if CONFIG_IS_ENABLED(CMD_USB)
+# define BOOT_TARGET_USB(func) func(USB, usb, 0)
+#else
+# define BOOT_TARGET_USB(func)
+#endif
+
 #ifndef BOOT_TARGET_DEVICES
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 0) \
-	func(USB, usb, 0) \
+	BOOT_TARGET_USB(func) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)
 #endif
diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h
index c12cd7c..b668817 100644
--- a/include/configs/topic_miami.h
+++ b/include/configs/topic_miami.h
@@ -34,7 +34,7 @@
 
 /* Setup proper boot sequences for Miami boards */
 
-#if defined(CONFIG_USB)
+#if defined(CONFIG_USB_HOST)
 # define EXTRA_ENV_USB \
 	"usbreset=i2c dev 1 && i2c mw 41 1 ff && i2c mw 41 3 fe && "\
 		"i2c mw 41 1 fe && i2c mw 41 1 ff\0" \