Convert CONFIG_SYS_FSL_QMAN_V3 et al to Kconfig

This converts the following to Kconfig:
   CONFIG_FSL_NGPIXIS
   CONFIG_SYS_FSL_QMAN_V3
   CONFIG_SYS_FSL_RAID_ENGINE
   CONFIG_SYS_FSL_RMU
   CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
   CONFIG_SYS_FSL_SRIO_LIODN
   CONFIG_SYS_FSL_TBCLK_DIV
   CONFIG_SYS_FSL_USB1_PHY_ENABLE
   CONFIG_SYS_FSL_USB2_PHY_ENABLE
   CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
   CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY

Signed-off-by: Tom Rini <trini@konsulko.com>

12 files changed, 82 insertions, 63 deletions

diff --git a/README b/README
index 4ef9e8c..a6c3061 100644
--- a/README
+++ b/README
@@ -294,12 +294,6 @@ The following options need to be configured:
 		the "64" category of the Power ISA). This is necessary for ePAPR
 		compliance, among other possible reasons.
 
-		CONFIG_SYS_FSL_TBCLK_DIV
-
-		Defines the core time base clock divider ratio compared to the
-		system clock.  On most PQ3 devices this is 8, on newer QorIQ
-		devices it can be 16 or 32.  The ratio varies from SoC to Soc.
-
 		CONFIG_SYS_FSL_ERRATUM_A004510
 
 		Enables a workaround for erratum A004510.  If set,
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 91a5863..8a7bbb4 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -85,6 +85,7 @@ config ARCH_LS1043A
 	select SYS_FSL_ERRATUM_A010539
 	select SYS_FSL_HAS_DDR3
 	select SYS_FSL_HAS_DDR4
+	select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
 	select SYS_I2C_MXC
@@ -123,6 +124,7 @@ config ARCH_LS1046A
 	select SYS_FSL_ERRATUM_A010539
 	select SYS_FSL_HAS_DDR4
 	select SYS_FSL_SRDS_2
+	select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
 	select SYS_I2C_MXC
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 1850008..5824778 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -209,7 +209,6 @@
 
 /* SoC related */
 #ifdef CONFIG_ARCH_LS1043A
-#define CONFIG_SYS_FSL_QMAN_V3
 #define CONFIG_SYS_NUM_FMAN			1
 #define CONFIG_SYS_NUM_FM1_DTSEC		7
 #define CONFIG_SYS_NUM_FM1_10GEC		1
@@ -256,7 +255,6 @@
 #define CONFIG_MAX_MEM_MAPPED		CONFIG_SYS_DDR_BLOCK1_SIZE
 
 #elif defined(CONFIG_ARCH_LS1046A)
-#define CONFIG_SYS_FSL_QMAN_V3
 #define CONFIG_SYS_NUM_FMAN			1
 #define CONFIG_SYS_NUM_FM1_DTSEC		8
 #define CONFIG_SYS_NUM_FM1_10GEC		2
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index d01e69b..81f7991 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -78,6 +78,7 @@ config TARGET_P3041DS
 	select PHYS_64BIT
 	select ARCH_P3041
 	select BOARD_LATE_INIT if CHAIN_OF_TRUST
+	select FSL_NGPIXIS
 	imply CMD_SATA
 	imply PANIC_HANG
 
@@ -86,6 +87,7 @@ config TARGET_P4080DS
 	select PHYS_64BIT
 	select ARCH_P4080
 	select BOARD_LATE_INIT if CHAIN_OF_TRUST
+	select FSL_NGPIXIS
 	imply CMD_SATA
 	imply PANIC_HANG
 
@@ -94,6 +96,8 @@ config TARGET_P5040DS
 	select PHYS_64BIT
 	select ARCH_P5040
 	select BOARD_LATE_INIT if CHAIN_OF_TRUST
+	select FSL_NGPIXIS
+	select SYS_FSL_RAID_ENGINE
 	imply CMD_SATA
 	imply PANIC_HANG
 
@@ -262,6 +266,8 @@ config ARCH_B4420
 	select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24
 	select SYS_FSL_SEC_BE
 	select SYS_FSL_SEC_COMPAT_4
+	select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
+	select SYS_FSL_USB1_PHY_ENABLE
 	select SYS_PPC64
 	select FSL_IFC
 	imply CMD_EEPROM
@@ -293,6 +299,9 @@ config ARCH_B4860
 	select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24
 	select SYS_FSL_SEC_BE
 	select SYS_FSL_SEC_COMPAT_4
+	select SYS_FSL_SRIO_LIODN
+	select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
+	select SYS_FSL_USB1_PHY_ENABLE
 	select SYS_PPC64
 	select FSL_IFC
 	imply CMD_EEPROM
@@ -405,6 +414,7 @@ config ARCH_MPC8548
 	select SYS_FSL_HAS_DDR2
 	select SYS_FSL_HAS_DDR1
 	select SYS_FSL_HAS_SEC
+	select SYS_FSL_RMU
 	select SYS_FSL_SEC_BE
 	select SYS_FSL_SEC_COMPAT_2
 	select SYS_PPC_E500_USE_DEBUG_TLB
@@ -440,6 +450,7 @@ config ARCH_P1010
 	select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v22
 	select SYS_FSL_SEC_BE
 	select SYS_FSL_SEC_COMPAT_4
+	select SYS_FSL_USB1_PHY_ENABLE
 	select SYS_PPC_E500_USE_DEBUG_TLB
 	select FSL_IFC
 	imply CMD_EEPROM
@@ -535,6 +546,7 @@ config ARCH_P1024
 	select FSL_PCIE_RESET
 	select SYS_FSL_HAS_DDR3
 	select SYS_FSL_HAS_SEC
+	select SYS_FSL_RMU
 	select SYS_FSL_SEC_BE
 	select SYS_FSL_SEC_COMPAT_2
 	select SYS_PPC_E500_USE_DEBUG_TLB
@@ -610,6 +622,8 @@ config ARCH_P2041
 	select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v22
 	select SYS_FSL_SEC_BE
 	select SYS_FSL_SEC_COMPAT_4
+	select SYS_FSL_USB1_PHY_ENABLE
+	select SYS_FSL_USB2_PHY_ENABLE
 	select FSL_ELBC
 	imply CMD_NAND
 
@@ -640,6 +654,8 @@ config ARCH_P3041
 	select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v22
 	select SYS_FSL_SEC_BE
 	select SYS_FSL_SEC_COMPAT_4
+	select SYS_FSL_USB1_PHY_ENABLE
+	select SYS_FSL_USB2_PHY_ENABLE
 	select FSL_ELBC
 	imply CMD_NAND
 	imply CMD_SATA
@@ -681,6 +697,7 @@ config ARCH_P4080
 	select SYS_FSL_HAS_DDR3
 	select SYS_FSL_HAS_SEC
 	select SYS_FSL_QORIQ_CHASSIS1
+	select SYS_FSL_RMU
 	select SYS_FSL_SEC_BE
 	select SYS_FSL_SEC_COMPAT_4
 	select FSL_ELBC
@@ -711,6 +728,8 @@ config ARCH_P5040
 	select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24
 	select SYS_FSL_SEC_BE
 	select SYS_FSL_SEC_COMPAT_4
+	select SYS_FSL_USB1_PHY_ENABLE
+	select SYS_FSL_USB2_PHY_ENABLE
 	select SYS_PPC64
 	select FSL_ELBC
 	imply CMD_SATA
@@ -742,6 +761,9 @@ config ARCH_T1024
 	select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24
 	select SYS_FSL_SEC_BE
 	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SINGLE_SOURCE_CLK
+	select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
+	select SYS_FSL_USB_DUAL_PHY_ENABLE
 	select FSL_IFC
 	imply CMD_EEPROM
 	imply CMD_NAND
@@ -770,6 +792,9 @@ config ARCH_T1040
 	select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24
 	select SYS_FSL_SEC_BE
 	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SINGLE_SOURCE_CLK
+	select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
+	select SYS_FSL_USB_DUAL_PHY_ENABLE
 	select FSL_IFC
 	imply CMD_MTDPARTS
 	imply CMD_NAND
@@ -797,6 +822,9 @@ config ARCH_T1042
 	select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v24
 	select SYS_FSL_SEC_BE
 	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SINGLE_SOURCE_CLK
+	select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
+	select SYS_FSL_USB_DUAL_PHY_ENABLE
 	select FSL_IFC
 	imply CMD_MTDPARTS
 	imply CMD_NAND
@@ -826,6 +854,9 @@ config ARCH_T2080
 	select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v30
 	select SYS_FSL_SEC_BE
 	select SYS_FSL_SEC_COMPAT_4
+	select SYS_FSL_SRIO_LIODN
+	select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
+	select SYS_FSL_USB_DUAL_PHY_ENABLE
 	select SYS_PPC64
 	select FSL_IFC
 	imply CMD_SATA
@@ -859,6 +890,9 @@ config ARCH_T4240
 	select SYS_FSL_PCIE_COMPAT_QORIQ_PCIE_v30
 	select SYS_FSL_SEC_BE
 	select SYS_FSL_SEC_COMPAT_4
+	select SYS_FSL_SRIO_LIODN
+	select SYS_FSL_QMAN_V3 if SYS_DPAA_QBMAN
+	select SYS_FSL_USB_DUAL_PHY_ENABLE
 	select SYS_PPC64
 	select FSL_IFC
 	imply CMD_SATA
@@ -1147,6 +1181,12 @@ config FSL_PCIE_DISABLE_ASPM
 config FSL_PCIE_RESET
 	bool
 
+config SYS_FSL_RAID_ENGINE
+	bool
+
+config SYS_FSL_RMU
+	bool
+
 config SYS_FSL_QORIQ_CHASSIS1
 	bool
 
@@ -1312,6 +1352,9 @@ config FSL_CORENET
 	bool
 	select SYS_FSL_CPC
 
+config FSL_NGPIXIS
+	bool
+
 config SYS_CPC_REINIT_F
 	bool
 	help
@@ -1347,6 +1390,33 @@ config SYS_FSL_PCIE_COMPAT
 	  Defines the string to utilize when trying to match PCIe device tree
 	  nodes for the given platform.
 
+config SYS_FSL_SINGLE_SOURCE_CLK
+	bool
+
+config SYS_FSL_SRIO_LIODN
+	bool
+
+config SYS_FSL_TBCLK_DIV
+	int
+	default 32 if ARCH_P2041 || ARCH_P3041
+	default 16 if ARCH_P4080 || ARCH_P5040 || ARCH_T4240 || ARCH_B4860 || \
+			ARCH_B4420 || ARCH_T1040 || ARCH_T1042 || \
+			ARCH_T1024 || ARCH_T2080
+	default 8
+	help
+	  Defines the core time base clock divider ratio compared to the system
+	  clock. On most PQ3 devices this is 8, on newer QorIQ devices it can
+	  be 16 or 32. The ratio varies from SoC to Soc.
+
+config SYS_FSL_USB1_PHY_ENABLE
+	bool
+
+config SYS_FSL_USB2_PHY_ENABLE
+	bool
+
+config SYS_FSL_USB_DUAL_PHY_ENABLE
+	bool
+
 config SYS_MPC85XX_NO_RESETVEC
 	bool "Discard resetvec section and move bootpg section up"
 	depends on MPC85xx
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index ffa8b60..1b6cdc4 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -334,9 +334,6 @@ int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 /*
  * Get timebase clock frequency
  */
-#ifndef CONFIG_SYS_FSL_TBCLK_DIV
-#define CONFIG_SYS_FSL_TBCLK_DIV 8
-#endif
 __weak unsigned long get_tbclk(void)
 {
 	unsigned long tbclk_div = CONFIG_SYS_FSL_TBCLK_DIV;
diff --git a/arch/powerpc/cpu/mpc85xx/spl_minimal.c b/arch/powerpc/cpu/mpc85xx/spl_minimal.c
index 21b35db..bdd7338 100644
--- a/arch/powerpc/cpu/mpc85xx/spl_minimal.c
+++ b/arch/powerpc/cpu/mpc85xx/spl_minimal.c
@@ -31,10 +31,6 @@ ulong cpu_init_f(void)
 	return 0;
 }
 
-#ifndef CONFIG_SYS_FSL_TBCLK_DIV
-#define CONFIG_SYS_FSL_TBCLK_DIV 8
-#endif
-
 void udelay(unsigned long usec)
 {
 	u32 ticks_per_usec = gd->bus_clk / (CONFIG_SYS_FSL_TBCLK_DIV * 1000000);
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index f972bee..d3d4e9c 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -20,15 +20,12 @@
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	1
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-#define CONFIG_SYS_FSL_RMU
 #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM	2
 
 #elif defined(CONFIG_ARCH_P1010)
 #define CONFIG_FSL_SDHC_V2_3
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT	4
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
 
 /* P1011 is single core version of P1020 */
 #elif defined(CONFIG_ARCH_P1011)
@@ -65,7 +62,6 @@
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-#define CONFIG_SYS_FSL_RMU
 #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM	2
 
 #elif defined(CONFIG_ARCH_P2041) /* also supports P2040 */
@@ -73,10 +69,6 @@
 #define CONFIG_SYS_NUM_FM1_DTSEC	5
 #define CONFIG_SYS_NUM_FM1_10GEC	1
 #define CONFIG_SYS_FM_MURAM_SIZE	0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV	32
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
@@ -87,10 +79,6 @@
 #define CONFIG_SYS_NUM_FM1_DTSEC	5
 #define CONFIG_SYS_NUM_FM1_10GEC	1
 #define CONFIG_SYS_FM_MURAM_SIZE	0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV	32
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
@@ -103,11 +91,9 @@
 #define CONFIG_SYS_NUM_FM1_10GEC	1
 #define CONFIG_SYS_NUM_FM2_10GEC	1
 #define CONFIG_SYS_FM_MURAM_SIZE	0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV	16
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-#define CONFIG_SYS_FSL_RMU
 #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM	2
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
 
@@ -118,10 +104,6 @@
 #define CONFIG_SYS_NUM_FM2_DTSEC	5
 #define CONFIG_SYS_NUM_FM2_10GEC	1
 #define CONFIG_SYS_FM_MURAM_SIZE	0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV	16
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
 
 #elif defined(CONFIG_ARCH_BSC9131)
@@ -135,7 +117,6 @@
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT	3
 
 #elif defined(CONFIG_ARCH_T4240)
-#define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
 #ifdef CONFIG_ARCH_T4240
 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS   { 1, 1, 4 }
 #define CONFIG_SYS_NUM_FM1_DTSEC	8
@@ -158,24 +139,17 @@
 #define CONFIG_SYS_FM1_CLK		3
 #define CONFIG_SYS_FM2_CLK		3
 #define CONFIG_SYS_FM_MURAM_SIZE	0x60000
-#define CONFIG_SYS_FSL_TBCLK_DIV	16
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-#define CONFIG_SYS_FSL_SRIO_LIODN
-#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 
 #elif defined(CONFIG_ARCH_B4860) || defined(CONFIG_ARCH_B4420)
-#define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
 #define CONFIG_SYS_FSL_SRDS_1
 #define CONFIG_SYS_FSL_SRDS_2
 #define CONFIG_SYS_NUM_FMAN		1
 #define CONFIG_SYS_FM1_CLK		0
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT	4
 #define CONFIG_SYS_FM_MURAM_SIZE	0x60000
-#define CONFIG_SYS_FSL_TBCLK_DIV	16
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
 
 #ifdef CONFIG_ARCH_B4860
 #define CONFIG_MAX_DSP_CPUS		12
@@ -186,7 +160,6 @@
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-#define CONFIG_SYS_FSL_SRIO_LIODN
 #else
 #define CONFIG_MAX_DSP_CPUS		2
 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS	{ 1, 4 }
@@ -195,7 +168,6 @@
 #endif
 
 #elif defined(CONFIG_ARCH_T1040) || defined(CONFIG_ARCH_T1042)
-#define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS   { 1, 1, 1, 1 }
 #define CONFIG_SYS_FSL_SRDS_1
 #define CONFIG_SYS_NUM_FMAN		1
@@ -206,17 +178,12 @@
 #define CONFIG_FM_PLAT_CLK_DIV	1
 #define CONFIG_SYS_FM1_CLK		CONFIG_FM_PLAT_CLK_DIV
 #define CONFIG_SYS_FM_MURAM_SIZE	0x30000
-#define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
-#define CONFIG_SYS_FSL_TBCLK_DIV	16
-#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
 #define QE_MURAM_SIZE			0x6000UL
 #define MAX_QE_RISC			1
 #define QE_NUM_OF_SNUM			28
 
 #elif defined(CONFIG_ARCH_T1024)
-#define CONFIG_SYS_FSL_QMAN_V3	 /* QMAN version 3 */
 #define CONFIG_SYS_FSL_NUM_CC_PLL	2
 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS  { 1, 1, 1, 1 }
 #define CONFIG_SYS_FSL_SRDS_1
@@ -228,17 +195,12 @@
 #define CONFIG_SYS_FM1_CLK		0
 #define CONFIG_QBMAN_CLK_DIV		1
 #define CONFIG_SYS_FM_MURAM_SIZE	0x30000
-#define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
-#define CONFIG_SYS_FSL_TBCLK_DIV	16
-#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
 #define QE_MURAM_SIZE			0x6000UL
 #define MAX_QE_RISC			1
 #define QE_NUM_OF_SNUM			28
 
 #elif defined(CONFIG_ARCH_T2080)
-#define CONFIG_SYS_FSL_QMAN_V3
 #define CONFIG_SYS_NUM_FMAN		1
 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS	{ 1, 4, 4, 4 }
 #define CONFIG_SYS_FSL_SRDS_1
@@ -246,7 +208,6 @@
 #define CONFIG_SYS_NUM_FM1_DTSEC	8
 #define CONFIG_SYS_NUM_FM1_10GEC	4
 #define CONFIG_SYS_FSL_SRDS_2
-#define CONFIG_SYS_FSL_SRIO_LIODN
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
@@ -256,9 +217,6 @@
 #define CONFIG_SYS_FM1_CLK		0
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT	8
 #define CONFIG_SYS_FM_MURAM_SIZE	0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV	16
-#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
 
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 52dc9e4..53742b2 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -844,6 +844,10 @@ config SYS_DPAA_QBMAN
 	help
 	  QBman fixups to allow deep sleep in DPAA 1 SOCs
 
+config SYS_FSL_QMAN_V3
+	bool # QMAN version 3
+	depends on SYS_DPAA_QBMAN
+
 config TSEC_ENET
 	select PHYLIB
 	bool "Enable Three-Speed Ethernet Controller"
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index c3b97f4..a0f48f0 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -282,9 +282,15 @@ config EHCI_HCD_INIT_AFTER_RESET
 config USB_EHCI_FSL
 	bool  "Support for FSL on-chip EHCI USB controller"
 	select EHCI_HCD_INIT_AFTER_RESET
+	select SYS_FSL_USB_INTERNAL_UTMI_PHY if MPC85xx && \
+		!(ARCH_B4860 || ARCH_B4420 || ARCH_P4080 || ARCH_P1020 || ARCH_P2020)
 	---help---
 	  Enables support for the on-chip EHCI controller on FSL chips.
 
+config SYS_FSL_USB_INTERNAL_UTMI_PHY
+	bool
+	depends on USB_EHCI_FSL
+
 config USB_EHCI_TXFIFO_THRESH
 	hex
 	depends on USB_EHCI_TEGRA
diff --git a/include/configs/P3041DS.h b/include/configs/P3041DS.h
index bc8aa3c..42e507b 100644
--- a/include/configs/P3041DS.h
+++ b/include/configs/P3041DS.h
@@ -7,8 +7,6 @@
  * P3041 DS board configuration file
  *
  */
-#define CONFIG_FSL_NGPIXIS		/* use common ngPIXIS code */
-
 #define CONFIG_SYS_DPAA_RMAN
 
 #define CONFIG_SYS_SRIO
diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h
index 6375c65..fd55839 100644
--- a/include/configs/P4080DS.h
+++ b/include/configs/P4080DS.h
@@ -7,7 +7,6 @@
  * P4080 DS board configuration file
  * Also supports P4040 DS
  */
-#define CONFIG_FSL_NGPIXIS		/* use common ngPIXIS code */
 
 #define CONFIG_SYS_SRIO
 #define CONFIG_SRIO1			/* SRIO port 1 */
diff --git a/include/configs/P5040DS.h b/include/configs/P5040DS.h
index fb73f0b..c8fc879 100644
--- a/include/configs/P5040DS.h
+++ b/include/configs/P5040DS.h
@@ -7,9 +7,6 @@
  * P5040 DS board configuration file
  *
  */
-#define CONFIG_FSL_NGPIXIS		/* use common ngPIXIS code */
-
-#define CONFIG_SYS_FSL_RAID_ENGINE
 
 #define CONFIG_ICS307_REFCLK_HZ		25000000  /* ICS307 ref clk freq */