Merge tag 'efi-2021-04-rc5' of https://source.denx.de/u-boot/custodians/u-boot-efiWIP/16Mar2021

Pull request for efi-2021-04-rc5

Bug fixes:

* fix memory type for memory reservation block
* illegal cast to pointer in initrddump
* fix compiler warnings

Documentation:

* move README.dfu to HTML documentation

13 files changed, 421 insertions, 548 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index de49994..c6dd9bf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -670,6 +670,7 @@ F:	common/dfu.c
 F:	common/update.c
 F:	common/usb_storage.c
 F:	doc/api/dfu.rst
+F:	doc/usage/dfu.rst
 F:	drivers/dfu/
 F:	drivers/usb/gadget/
 F:	include/dfu.h
diff --git a/cmd/efidebug.c b/cmd/efidebug.c
index e4030f5..55c7abe 100644
--- a/cmd/efidebug.c
+++ b/cmd/efidebug.c
@@ -72,7 +72,7 @@ static int do_efi_capsule_update(struct cmd_tbl *cmdtp, int flag,
 		       capsule->capsule_image_size);
 	}
 
-	ret = EFI_CALL(RT->update_capsule(&capsule, 1, (u64)NULL));
+	ret = EFI_CALL(RT->update_capsule(&capsule, 1, 0));
 	if (ret) {
 		printf("Cannot handle a capsule at %p", capsule);
 		return CMD_RET_FAILURE;
diff --git a/doc/README.dfu b/doc/README.dfu
deleted file mode 100644
index eacd5bb..0000000
--- a/doc/README.dfu
+++ /dev/null
@@ -1,311 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-
-Device Firmware Upgrade (DFU)
-
-Overview:
-
-  The Device Firmware Upgrade (DFU) allows to download and upload firmware
-  to/from U-Boot connected over USB.
-
-  U-boot follows the Universal Serial Bus Device Class Specification for
-  Device Firmware Upgrade Version 1.1 the USB forum (DFU v1.1 in www.usb.org).
-
-  U-Boot implements this DFU capability (CONFIG_DFU) with the command dfu
-  (cmd/dfu.c / CONFIG_CMD_DFU) based on:
-  - the DFU stack (common/dfu.c and common/spl/spl_dfu.c), based on the
-    USB DFU download gadget (drivers/usb/gadget/f_dfu.c)
-  - The access to mediums is done in DFU backends (driver/dfu)
-
-  Today the supported DFU backends are:
-  - MMC (RAW or FAT / EXT2 / EXT3 / EXT4 file system / SKIP / SCRIPT)
-  - NAND
-  - RAM
-  - SF (serial flash)
-  - MTD (all MTD device: NAND, SPI-NOR, SPI-NAND,...)
-  - virtual
-
-  These DFU backends are also used by
-  - the dfutftp (see README.dfutftp)
-  - the thordown command (cmd/thordown.c and gadget/f_thor.c)
-
-  The "virtual" backend is a generic DFU backend to support a board specific
-  target (for example OTP), only based on the weak functions:
-  - dfu_write_medium_virt
-  - dfu_get_medium_size_virt
-  - dfu_read_medium_virt
-
-Configuration Options:
-  CONFIG_DFU
-  CONFIG_DFU_OVER_USB
-  CONFIG_DFU_MMC
-  CONFIG_DFU_MTD
-  CONFIG_DFU_NAND
-  CONFIG_DFU_RAM
-  CONFIG_DFU_SF
-  CONFIG_DFU_SF_PART
-  CONFIG_DFU_TIMEOUT
-  CONFIG_DFU_VIRTUAL
-  CONFIG_CMD_DFU
-
-Environment variables:
-  the dfu command uses 3 environments variables:
-  "dfu_alt_info" : the DFU setting for the USB download gadget with a semicolon
-                   separated string of information on each alternate:
-                   dfu_alt_info="<alt1>;<alt2>;....;<altN>"
-
-                   when several devices are used, the format is:
-                   - <interface> <dev>'='alternate list (';' separated)
-                   - each interface is separated by '&'
-                dfu_alt_info=\
-                   "<interface1> <dev1>=<alt1>;....;<altN>&"\
-                   "<interface2> <dev2>=<altN+1>;....;<altM>&"\
-                   ...\
-                   "<interfaceI> <devI>=<altY+1>;....;<altZ>&"
-
-  "dfu_bufsiz" : size of the DFU buffer, when absent, use
-                 CONFIG_SYS_DFU_DATA_BUF_SIZE (8 MiB by default)
-
-  "dfu_hash_algo" : name of the hash algorithm to use
-
-Commands:
-  dfu <USB_controller> [<interface> <dev>] list
-    list the alternate device defined in "dfu_alt_info"
-
-  dfu <USB_controller> [<interface> <dev>] [<timeout>]
-    start the dfu stack on the USB instance with the selected medium
-    backend and use the "dfu_alt_info" variable to configure the
-    alternate setting and link each one with the medium
-    The dfu command continue until receive a ^C in console or
-    a DFU detach transaction from HOST. If CONFIG_DFU_TIMEOUT option
-    is enabled and <timeout> parameter is present in the command line,
-    the DFU operation will be aborted automatically after <timeout>
-    seconds of waiting remote to initiate DFU session.
-
-  The possible values of <interface> are :
-  (with <USB controller> = 0 in the dfu command example)
-
-  "mmc" (for eMMC and SD card)
-    cmd: dfu 0 mmc <dev>
-    each element in "dfu_alt_info" =
-      <name> raw <offset> <size> [mmcpart <num>]   raw access to mmc device
-      <name> part <dev> <part_id> [mmcpart <num>]  raw access to partition
-      <name> fat <dev> <part_id> [mmcpart <num>]   file in FAT partition
-      <name> ext4 <dev> <part_id> [mmcpart <num>]  file in EXT4 partition
-      <name> skip 0 0                              ignore flashed data
-      <name> script 0 0                            execute commands in shell
-
-      with <partid> being the GPT or DOS partition index,
-      with <num> being the eMMC hardware partition number.
-
-    A value of environment variable dfu_alt_info for eMMC could be:
-
-      "u-boot raw 0x3e 0x800 mmcpart 1;bl2 raw 0x1e 0x1d mmcpart 1"
-
-    A value of environment variable dfu_alt_info for SD card could be:
-
-      "u-boot raw 0x80 0x800;uImage ext4 0 2"
-
-    If don't want to flash given image file to storage, use "skip" type
-    entity.
-    - It can be used to protect flashing wrong image for the specific board.
-    - Especailly, this layout will be useful when thor protocol is used,
-      which performs flashing in batch mode, where more than one file is
-      processed.
-    For example, if one makes a single tar file with support for the two
-    boards with u-boot-<board1>.bin and u-boot-<board2>.bin files, one
-    can use it to flash a proper u-boot image on both without a failure:
-
-      "u-boot-<board1>.bin raw 0x80 0x800; u-boot-<board2>.bin skip 0 0"
-
-    When flashing new system image requires do some more complex things
-    than just writing data to the storage medium, one can use 'script'
-    type. Data written to such entity will be executed as a command list
-    in the u-boot's shell. This for example allows to re-create partition
-    layout and even set new dfu_alt_info for the newly created paritions.
-    Such script would look like:
-	--->8---
-	setenv dfu_alt_info ...
-	setenv mbr_parts ...
-	mbr write ...
-	--->8---
-    Please note that this means that user will be able to execute any
-    arbitrary commands just like in the u-boot's shell.
-
-  "nand" (raw slc nand device)
-    cmd: dfu 0 nand <dev>
-    each element in "dfu_alt_info" =
-      <name> raw <offset> <size>   raw access to mmc device
-      <name> part <dev> <part_id>  raw acces to partition
-      <name> partubi <dev> <part_id>  raw acces to ubi partition
-
-      with <partid> is the MTD partition index
-
-  "ram"
-    cmd: dfu 0 ram <dev>
-    (<dev> is not used for RAM target)
-    each element in "dfu_alt_info" =
-      <name> ram <offset> <size>  raw access to ram
-
-  "sf" (serial flash : NOR)
-    cmd: dfu 0 sf <dev>
-    each element in "dfu_alt_info" =
-      <name> raw <offset> <size>  raw access to sf device
-      <name> part <dev> <part_id>  raw acces to partition
-      <name> partubi <dev> <part_id>  raw acces to ubi partition
-
-      with <partid> is the MTD partition index
-
-  "mtd" (all MTD device: NAND, SPI-NOR, SPI-NAND,...)
-    cmd: dfu 0 mtd <dev>
-      with <dev> the mtd identifier as defined in mtd command
-      (nand0, nor0, spi-nand0,...)
-    each element in "dfu_alt_info" =
-      <name> raw <offset> <size>  raw access to mtd device
-      <name> part <dev> <part_id>  raw acces to partition
-      <name> partubi <dev> <part_id>  raw acces to ubi partition
-
-      with <partid> is the MTD partition index
-
-  "virt"
-    cmd: dfu 0 virt <dev>
-    each element in "dfu_alt_info" =
-      <name>
-
-  <interface> and <dev> are absent:
-    the dfu command to use multiple devices
-    cmd: dfu 0 list
-    cmd: dfu 0
-   "dfu_alt_info" variable provides the list of <interface> <dev> with
-   alternate list separated by '&' with the same format for each <alt>
-       mmc <dev>=<alt1>;....;<altN>
-       nand <dev>=<alt1>;....;<altN>
-       ram <dev>=<alt1>;....;<altN>
-       sf <dev>=<alt1>;....;<altN>
-       mtd <dev>=<alt1>;....;<altN>
-       virt <dev>=<alt1>;....;<altN>
-
-Callbacks:
-  The weak callback functions can be implemented to manage specific behavior
-  - dfu_initiated_callback  : called when the DFU transaction is started,
-                              used to initiase the device
-  - dfu_flush_callback      : called at the end of the DFU write after DFU
-                              manifestation, used to manage the device when
-                              DFU transaction is closed
-
-Host tools:
-  When U-Boot runs the dfu stack, the DFU host tools can be used
-  to send/receive firmwares on each configurated alternate.
-
-  For example dfu-util is a host side implementation of the DFU 1.1
-  specifications(http://dfu-util.sourceforge.net/) which works with U-Boot.
-
-Usage:
-  Example 1: firmware located in eMMC or SD card, with:
-  - alternate 1 (alt=1) for SPL partition (GPT partition 1)
-  - alternate 2 (alt=2) for U-Boot partition (GPT partition 2)
-
-  The U-Boot configuration is:
-
-  U-Boot> env set dfu_alt_info "spl part 0 1;u-boot part 0 2"
-
-  U-Boot> dfu 0 mmc 0 list
-  DFU alt settings list:
-  dev: eMMC alt: 0 name: spl layout: RAW_ADDR
-  dev: eMMC alt: 1 name: u-boot layout: RAW_ADDR
-
-  Boot> dfu 0 mmc 0
-
-  On the Host side:
-
-  list the available alternate setting:
-
-  $> dfu-util -l
-  dfu-util 0.9
-
-  Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
-  Copyright 2010-2016 Tormod Volden and Stefan Schmidt
-  This program is Free Software and has ABSOLUTELY NO WARRANTY
-  Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
-
-  Found DFU: [0483:5720] ver=0200, devnum=45, cfg=1, intf=0, path="3-1.3.1", \
-     alt=1, name="u-boot", serial="003A00203438510D36383238"
-  Found DFU: [0483:5720] ver=0200, devnum=45, cfg=1, intf=0, path="3-1.3.1", \
-     alt=0, name="spl", serial="003A00203438510D36383238"
-
-  To download to U-Boot, use -D option
-
-  $> dfu-util -a 0 -D u-boot-spl.bin
-  $> dfu-util -a 1 -D u-boot.bin
-
-  To upload from U-Boot, use -U option
-
-  $> dfu-util -a 0 -U u-boot-spl.bin
-  $> dfu-util -a 1 -U u-boot.bin
-
-  To request a DFU detach and reset the USB connection:
-  $> dfu-util -a 0 -e  -R
-
-
-  Example 2: firmware located in NOR (sf) and NAND, with:
-  - alternate 1 (alt=1) for SPL partition (NOR GPT partition 1)
-  - alternate 2 (alt=2) for U-Boot partition (NOR GPT partition 2)
-  - alternate 3 (alt=3) for U-Boot-env partition (NOR GPT partition 3)
-  - alternate 4 (alt=4) for UBI partition (NAND GPT partition 1)
-
-  U-Boot> env set dfu_alt_info \
-  "sf 0:0:10000000:0=spl part 0 1;u-boot part 0 2; \
-  u-boot-env part 0 3&nand 0=UBI partubi 0,1"
-
-  U-Boot> dfu 0 list
-
-  DFU alt settings list:
-  dev: SF alt: 0 name: spl layout: RAW_ADDR
-  dev: SF alt: 1 name: ssbl layout: RAW_ADDR
-  dev: SF alt: 2 name: u-boot-env layout: RAW_ADDR
-  dev: NAND alt: 3 name: UBI layout: RAW_ADDR
-
-  U-Boot> dfu 0
-
-  $> dfu-util -l
-  Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
-     intf=0, alt=3, name="UBI", serial="002700333338511934383330"
-  Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
-     intf=0, alt=2, name="u-boot-env", serial="002700333338511934383330"
-  Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
-     intf=0, alt=1, name="u-boot", serial="002700333338511934383330"
-  Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
-     intf=0, alt=0, name="spl", serial="002700333338511934383330"
-
-  Same example with MTD backend
-
-   U-Boot> env set dfu_alt_info \
-      "mtd nor0=spl part 1;u-boot part 2;u-boot-env part 3&"\
-      "mtd nand0=UBI partubi 1"
-
-  U-Boot> dfu 0 list
-  using id 'nor0,0'
-  using id 'nor0,1'
-  using id 'nor0,2'
-  using id 'nand0,0'
-  DFU alt settings list:
-  dev: MTD alt: 0 name: spl layout: RAW_ADDR
-  dev: MTD alt: 1 name: u-boot layout: RAW_ADDR
-  dev: MTD alt: 2 name: u-boot-env layout: RAW_ADDR
-  dev: MTD alt: 3 name: UBI layout: RAW_ADDR
-
-  Example 3: firmware located in SD Card (mmc) and virtual partition on
-             OTP and PMIC not volatile memory
-  - alternate 1 (alt=1) for scard
-  - alternate 2 (alt=2) for OTP (virtual)
-  - alternate 3 (alt=3) for PMIC NVM (virtual)
-
-   U-Boot> env set dfu_alt_info \
-      "mmc 0=sdcard raw 0 0x100000&"\
-      "virt 0=otp" \
-      "virt 1=pmic"
-
-   U-Boot> dfu 0 list
-   DFU alt settings list:
-   dev: eMMC alt: 0 name: sdcard layout: RAW_ADDR
-   dev: VIRT alt: 1 name: otp layout: RAW_ADDR
-   dev: VIRT alt: 2 name: pmic layout: RAW_ADDR
diff --git a/doc/usage/dfu.rst b/doc/usage/dfu.rst
new file mode 100644
index 0000000..11c8807
--- /dev/null
+++ b/doc/usage/dfu.rst
@@ -0,0 +1,404 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Device Firmware Upgrade (DFU)
+=============================
+
+Overview
+--------
+
+The Device Firmware Upgrade (DFU) allows to download and upload firmware
+to/from U-Boot connected over USB.
+
+U-boot follows the Universal Serial Bus Device Class Specification for
+Device Firmware Upgrade Version 1.1 the USB forum (DFU v1.1 in www.usb.org).
+
+U-Boot implements this DFU capability (CONFIG_DFU) with the command dfu
+(cmd/dfu.c / CONFIG_CMD_DFU) based on:
+
+- the DFU stack (common/dfu.c and common/spl/spl_dfu.c), based on the
+  USB DFU download gadget (drivers/usb/gadget/f_dfu.c)
+- The access to mediums is done in DFU backends (driver/dfu)
+
+Today the supported DFU backends are:
+
+- MMC (RAW or FAT / EXT2 / EXT3 / EXT4 file system / SKIP / SCRIPT)
+- NAND
+- RAM
+- SF (serial flash)
+- MTD (all MTD device: NAND, SPI-NOR, SPI-NAND,...)
+- virtual
+
+These DFU backends are also used by
+
+- the dfutftp (see README.dfutftp)
+- the thordown command (cmd/thordown.c and gadget/f_thor.c)
+
+The "virtual" backend is a generic DFU backend to support a board specific
+target (for example OTP), only based on the weak functions:
+
+- dfu_write_medium_virt
+- dfu_get_medium_size_virt
+- dfu_read_medium_virt
+
+Configuration Options
+---------------------
+
+The following configuration option are relevant for device firmware upgrade:
+
+* CONFIG_DFU
+* CONFIG_DFU_OVER_USB
+* CONFIG_DFU_MMC
+* CONFIG_DFU_MTD
+* CONFIG_DFU_NAND
+* CONFIG_DFU_RAM
+* CONFIG_DFU_SF
+* CONFIG_DFU_SF_PART
+* CONFIG_DFU_TIMEOUT
+* CONFIG_DFU_VIRTUAL
+* CONFIG_CMD_DFU
+
+Environment variables
+---------------------
+
+The dfu command uses 3 environments variables:
+
+dfu_alt_info
+    The DFU setting for the USB download gadget with a semicolon separated
+    string of information on each alternate::
+
+        dfu_alt_info="<alt1>;<alt2>;....;<altN>"
+
+    When several devices are used, the format is:
+
+    - <interface> <dev>'='alternate list (';' separated)
+    - each interface is separated by '&'::
+
+        dfu_alt_info=\
+            "<interface1> <dev1>=<alt1>;....;<altN>&"\
+            "<interface2> <dev2>=<altN+1>;....;<altM>&"\
+            ...\
+            "<interfaceI> <devI>=<altY+1>;....;<altZ>&"
+
+dfu_bufsiz
+    size of the DFU buffer, when absent, defaults to
+    CONFIG_SYS_DFU_DATA_BUF_SIZE (8 MiB by default)
+
+dfu_hash_algo
+    name of the hash algorithm to use
+
+Commands
+--------
+
+dfu <USB_controller> [<interface> <dev>] list
+    list the alternate device defined in *dfu_alt_info*
+
+dfu <USB_controller> [<interface> <dev>] [<timeout>]
+    start the dfu stack on the USB instance with the selected medium
+    backend and use the *dfu_alt_info* variable to configure the
+    alternate setting and link each one with the medium
+    The dfu command continue until receive a ^C in console or
+    a DFU detach transaction from HOST. If CONFIG_DFU_TIMEOUT option
+    is enabled and <timeout> parameter is present in the command line,
+    the DFU operation will be aborted automatically after <timeout>
+    seconds of waiting remote to initiate DFU session.
+
+The possible values of <interface> are (with <USB controller> = 0 in the dfu
+command example)
+
+mmc
+    for eMMC and SD card::
+
+        dfu 0 mmc <dev>
+
+    each element in *dfu_alt_info* being
+
+    * <name> raw <offset> <size> [mmcpart <num>]   raw access to mmc device
+    * <name> part <dev> <part_id> [mmcpart <num>]  raw access to partition
+    * <name> fat <dev> <part_id> [mmcpart <num>]   file in FAT partition
+    * <name> ext4 <dev> <part_id> [mmcpart <num>]  file in EXT4 partition
+    * <name> skip 0 0                              ignore flashed data
+    * <name> script 0 0                            execute commands in shell
+
+    with
+
+    partid
+        being the GPT or DOS partition index,
+    num
+         being the eMMC hardware partition number.
+
+    A value of environment variable *dfu_alt_info* for eMMC could be::
+
+        u-boot raw 0x3e 0x800 mmcpart 1;bl2 raw 0x1e 0x1d mmcpart 1
+
+    A value of environment variable *dfu_alt_info* for SD card could be::
+
+        u-boot raw 0x80 0x800;uImage ext4 0 2
+
+    If don't want to flash given image file to storage, use "skip" type
+    entity.
+
+    - It can be used to protect flashing wrong image for the specific board.
+    - Especailly, this layout will be useful when thor protocol is used,
+      which performs flashing in batch mode, where more than one file is
+      processed.
+
+    For example, if one makes a single tar file with support for the two
+    boards with u-boot-<board1>.bin and u-boot-<board2>.bin files, one
+    can use it to flash a proper u-boot image on both without a failure::
+
+        u-boot-<board1>.bin raw 0x80 0x800; u-boot-<board2>.bin skip 0 0
+
+    When flashing new system image requires do some more complex things
+    than just writing data to the storage medium, one can use 'script'
+    type. Data written to such entity will be executed as a command list
+    in the u-boot's shell. This for example allows to re-create partition
+    layout and even set new *dfu_alt_info* for the newly created paritions.
+    Such script would look like::
+
+        setenv dfu_alt_info ...
+        setenv mbr_parts ...
+        mbr write ...
+
+    Please note that this means that user will be able to execute any
+    arbitrary commands just like in the u-boot's shell.
+
+nand
+    raw slc nand device::
+
+         dfu 0 nand <dev>
+
+    each element in *dfu_alt_info* being either of
+
+    * <name> raw <offset> <size>   raw access to mmc device
+    * <name> part <dev> <part_id>  raw acces to partition
+    * <name> partubi <dev> <part_id>  raw acces to ubi partition
+
+    with
+
+    partid
+        is the MTD partition index
+
+ram
+    raw access to ram::
+
+         dfu 0 ram <dev>
+
+    dev
+        is not used for RAM target
+
+    each element in *dfu_alt_info* being::
+
+      <name> ram <offset> <size>  raw access to ram
+
+sf
+    serial flash : NOR::
+
+        cmd: dfu 0 sf <dev>
+
+    each element in *dfu_alt_info* being either of:
+
+    * <name> raw <offset> <size>  raw access to sf device
+    * <name> part <dev> <part_id>  raw acces to partition
+    * <name> partubi <dev> <part_id>  raw acces to ubi partition
+
+    with
+
+    partid
+        is the MTD partition index
+
+mtd
+    all MTD device: NAND, SPI-NOR, SPI-NAND,...::
+
+        cmd: dfu 0 mtd <dev>
+
+    with
+
+    dev
+        the mtd identifier as defined in mtd command
+        (nand0, nor0, spi-nand0,...)
+
+    each element in *dfu_alt_info* being either of:
+
+    * <name> raw <offset> <size> forraw access to mtd device
+    * <name> part <dev> <part_id> for raw acces to partition
+    * <name> partubi <dev> <part_id> for raw acces to ubi partition
+
+    with
+
+    partid
+        is the MTD partition index
+
+virt
+    virtual flash back end for DFU
+
+    ::
+
+        cmd: dfu 0 virt <dev>
+
+    each element in *dfu_alt_info* being:
+
+    * <name>
+
+<interface> and <dev> are absent, the dfu command to use multiple devices::
+
+    cmd: dfu 0 list
+    cmd: dfu 0
+
+*dfu_alt_info* variable provides the list of <interface> <dev> with
+alternate list separated by '&' with the same format for each <alt>::
+
+    mmc <dev>=<alt1>;....;<altN>
+    nand <dev>=<alt1>;....;<altN>
+    ram <dev>=<alt1>;....;<altN>
+    sf <dev>=<alt1>;....;<altN>
+    mtd <dev>=<alt1>;....;<altN>
+    virt <dev>=<alt1>;....;<altN>
+
+Callbacks
+---------
+
+The weak callback functions can be implemented to manage specific behavior
+
+dfu_initiated_callback
+   called when the DFU transaction is started, used to initiase the device
+
+dfu_flush_callback
+    called at the end of the DFU write after DFU manifestation, used to manage
+    the device when DFU transaction is closed
+
+Host tools
+----------
+
+When U-Boot runs the dfu stack, the DFU host tools can be used
+to send/receive firmwares on each configurated alternate.
+
+For example dfu-util is a host side implementation of the DFU 1.1
+specifications(http://dfu-util.sourceforge.net/) which works with U-Boot.
+
+Usage
+-----
+
+Example 1: firmware located in eMMC or SD card, with:
+
+- alternate 1 (alt=1) for SPL partition (GPT partition 1)
+- alternate 2 (alt=2) for U-Boot partition (GPT partition 2)
+
+The U-Boot configuration is::
+
+  U-Boot> env set dfu_alt_info "spl part 0 1;u-boot part 0 2"
+
+  U-Boot> dfu 0 mmc 0 list
+  DFU alt settings list:
+  dev: eMMC alt: 0 name: spl layout: RAW_ADDR
+  dev: eMMC alt: 1 name: u-boot layout: RAW_ADDR
+
+  Boot> dfu 0 mmc 0
+
+On the Host side:
+
+list the available alternate setting::
+
+  $> dfu-util -l
+  dfu-util 0.9
+
+  Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
+  Copyright 2010-2016 Tormod Volden and Stefan Schmidt
+  This program is Free Software and has ABSOLUTELY NO WARRANTY
+  Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
+
+  Found DFU: [0483:5720] ver=0200, devnum=45, cfg=1, intf=0, path="3-1.3.1", \
+     alt=1, name="u-boot", serial="003A00203438510D36383238"
+  Found DFU: [0483:5720] ver=0200, devnum=45, cfg=1, intf=0, path="3-1.3.1", \
+     alt=0, name="spl", serial="003A00203438510D36383238"
+
+  To download to U-Boot, use -D option
+
+  $> dfu-util -a 0 -D u-boot-spl.bin
+  $> dfu-util -a 1 -D u-boot.bin
+
+  To upload from U-Boot, use -U option
+
+  $> dfu-util -a 0 -U u-boot-spl.bin
+  $> dfu-util -a 1 -U u-boot.bin
+
+  To request a DFU detach and reset the USB connection:
+  $> dfu-util -a 0 -e  -R
+
+
+Example 2: firmware located in NOR (sf) and NAND, with:
+
+- alternate 1 (alt=1) for SPL partition (NOR GPT partition 1)
+- alternate 2 (alt=2) for U-Boot partition (NOR GPT partition 2)
+- alternate 3 (alt=3) for U-Boot-env partition (NOR GPT partition 3)
+- alternate 4 (alt=4) for UBI partition (NAND GPT partition 1)
+
+::
+
+  U-Boot> env set dfu_alt_info \
+  "sf 0:0:10000000:0=spl part 0 1;u-boot part 0 2; \
+  u-boot-env part 0 3&nand 0=UBI partubi 0,1"
+
+  U-Boot> dfu 0 list
+
+  DFU alt settings list:
+  dev: SF alt: 0 name: spl layout: RAW_ADDR
+  dev: SF alt: 1 name: ssbl layout: RAW_ADDR
+  dev: SF alt: 2 name: u-boot-env layout: RAW_ADDR
+  dev: NAND alt: 3 name: UBI layout: RAW_ADDR
+
+  U-Boot> dfu 0
+
+::
+
+  $> dfu-util -l
+  Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
+     intf=0, alt=3, name="UBI", serial="002700333338511934383330"
+  Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
+     intf=0, alt=2, name="u-boot-env", serial="002700333338511934383330"
+  Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
+     intf=0, alt=1, name="u-boot", serial="002700333338511934383330"
+  Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
+     intf=0, alt=0, name="spl", serial="002700333338511934383330"
+
+Same example with MTD backend
+
+::
+
+  U-Boot> env set dfu_alt_info \
+     "mtd nor0=spl part 1;u-boot part 2;u-boot-env part 3&"\
+     "mtd nand0=UBI partubi 1"
+
+  U-Boot> dfu 0 list
+  using id 'nor0,0'
+  using id 'nor0,1'
+  using id 'nor0,2'
+  using id 'nand0,0'
+  DFU alt settings list:
+  dev: MTD alt: 0 name: spl layout: RAW_ADDR
+  dev: MTD alt: 1 name: u-boot layout: RAW_ADDR
+  dev: MTD alt: 2 name: u-boot-env layout: RAW_ADDR
+  dev: MTD alt: 3 name: UBI layout: RAW_ADDR
+
+Example 3
+
+firmware located in SD Card (mmc) and virtual partition on OTP and PMIC not
+volatile memory
+
+- alternate 1 (alt=1) for scard
+- alternate 2 (alt=2) for OTP (virtual)
+- alternate 3 (alt=3) for PMIC NVM (virtual)
+
+::
+
+   U-Boot> env set dfu_alt_info \
+      "mmc 0=sdcard raw 0 0x100000&"\
+      "virt 0=otp" \
+      "virt 1=pmic"
+
+::
+
+   U-Boot> dfu 0 list
+   DFU alt settings list:
+   dev: eMMC alt: 0 name: sdcard layout: RAW_ADDR
+   dev: VIRT alt: 1 name: otp layout: RAW_ADDR
+   dev: VIRT alt: 2 name: pmic layout: RAW_ADDR
diff --git a/doc/usage/index.rst b/doc/usage/index.rst
index 9169fff..6c59bba 100644
--- a/doc/usage/index.rst
+++ b/doc/usage/index.rst
@@ -4,6 +4,7 @@ Use U-Boot
 .. toctree::
    :maxdepth: 1
 
+   dfu
    fdt_overlays
    netconsole
    partitions
diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index e729f72..634d3b1 100644
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -281,7 +281,7 @@ config EFI_HAVE_RUNTIME_RESET
 
 config EFI_GRUB_ARM32_WORKAROUND
 	bool "Workaround for GRUB on 32bit ARM"
-	default n if ARCH_QEMU
+	default n if ARCH_BCM283X || ARCH_SUNXI || ARCH_QEMU
 	default y
 	depends on ARM && !ARM64
 	help
diff --git a/lib/efi_loader/efi_capsule.c b/lib/efi_loader/efi_capsule.c
index b57f030..7ba1ced 100644
--- a/lib/efi_loader/efi_capsule.c
+++ b/lib/efi_loader/efi_capsule.c
@@ -449,7 +449,7 @@ efi_status_t EFIAPI efi_update_capsule(
 	unsigned int i;
 	efi_status_t ret;
 
-	EFI_ENTRY("%p, %lu, %llu\n", capsule_header_array, capsule_count,
+	EFI_ENTRY("%p, %zu, %llu\n", capsule_header_array, capsule_count,
 		  scatter_gather_list);
 
 	if (!capsule_count) {
@@ -509,7 +509,7 @@ efi_status_t EFIAPI efi_query_capsule_caps(
 	unsigned int i;
 	efi_status_t ret;
 
-	EFI_ENTRY("%p, %lu, %p, %p\n", capsule_header_array, capsule_count,
+	EFI_ENTRY("%p, %zu, %p, %p\n", capsule_header_array, capsule_count,
 		  maximum_capsule_size, reset_type);
 
 	if (!maximum_capsule_size) {
diff --git a/lib/efi_loader/efi_dt_fixup.c b/lib/efi_loader/efi_dt_fixup.c
index a4529ee..b6fe5d2 100644
--- a/lib/efi_loader/efi_dt_fixup.c
+++ b/lib/efi_loader/efi_dt_fixup.c
@@ -61,7 +61,7 @@ void efi_carve_out_dt_rsv(void *fdt)
 	for (i = 0; i < nr_rsv; i++) {
 		if (fdt_get_mem_rsv(fdt, i, &addr, &size) != 0)
 			continue;
-		efi_reserve_memory(addr, size, false);
+		efi_reserve_memory(addr, size, true);
 	}
 
 	/* process reserved-memory */
diff --git a/lib/efi_loader/efi_firmware.c b/lib/efi_loader/efi_firmware.c
index 5e401bb..7a3cca2 100644
--- a/lib/efi_loader/efi_firmware.c
+++ b/lib/efi_loader/efi_firmware.c
@@ -299,7 +299,7 @@ efi_status_t EFIAPI efi_firmware_fit_set_image(
 	efi_status_t (*progress)(efi_uintn_t completion),
 	u16 **abort_reason)
 {
-	EFI_ENTRY("%p %d %p %ld %p %p %p\n", this, image_index, image,
+	EFI_ENTRY("%p %d %p %zd %p %p %p\n", this, image_index, image,
 		  image_size, vendor_code, progress, abort_reason);
 
 	if (!image || image_index != 1)
@@ -414,7 +414,7 @@ efi_status_t EFIAPI efi_firmware_raw_set_image(
 	efi_status_t status;
 	efi_uintn_t capsule_payload_size;
 
-	EFI_ENTRY("%p %d %p %ld %p %p %p\n", this, image_index, image,
+	EFI_ENTRY("%p %d %p %zd %p %p %p\n", this, image_index, image,
 		  image_size, vendor_code, progress, abort_reason);
 
 	if (!image)
diff --git a/lib/efi_selftest/Makefile b/lib/efi_selftest/Makefile
index b02fd56..50de581 100644
--- a/lib/efi_selftest/Makefile
+++ b/lib/efi_selftest/Makefile
@@ -61,7 +61,6 @@ obj-$(CONFIG_CPU_V7) += efi_selftest_unaligned.o
 obj-$(CONFIG_EFI_LOADER_HII) += efi_selftest_hii.o
 obj-$(CONFIG_EFI_RNG_PROTOCOL) += efi_selftest_rng.o
 obj-$(CONFIG_EFI_GET_TIME) += efi_selftest_rtc.o
-obj-$(CONFIG_EFI_LOAD_FILE2_INITRD) += efi_selftest_load_initrd.o
 obj-$(CONFIG_EFI_TCG2_PROTOCOL) += efi_selftest_tcg2.o
 
 ifeq ($(CONFIG_GENERATE_ACPI_TABLE),)
diff --git a/lib/efi_selftest/efi_selftest_load_initrd.c b/lib/efi_selftest/efi_selftest_load_initrd.c
deleted file mode 100644
index f591dcd..0000000
--- a/lib/efi_selftest/efi_selftest_load_initrd.c
+++ /dev/null
@@ -1,221 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * efi_selftest_load_initrd
- *
- * Copyright (c) 2020 Ilias Apalodimas <ilias.apalodimas@linaro.org>
- *
- * This test checks the FileLoad2 protocol.
- * A known file is read from the file system and verified.
- *
- * An example usage - given a file image with a file system in partition 1
- * holding file initrd - is:
- *
- * * Configure the sandbox with
- *
- *   CONFIG_EFI_SELFTEST=y
- *   CONFIG_EFI_LOAD_FILE2_INITRD=y
- *   CONFIG_EFI_INITRD_FILESPEC="host 0:1 initrd"
- *
- * * Run ./u-boot and execute
- *
- *   host bind 0 image
- *   setenv efi_selftest load initrd
- *   bootefi selftest
- *
- * This would provide a test output like:
- *
- *   Testing EFI API implementation
- *
- *   Selected test: 'load initrd'
- *
- *   Setting up 'load initrd'
- *   Setting up 'load initrd' succeeded
- *
- *   Executing 'load initrd'
- *   Loaded 12378613 bytes
- *   CRC32 2997478465
- *
- * Now the size and CRC32 can be compared to the provided file.
- */
-
-#include <efi_selftest.h>
-#include <efi_loader.h>
-#include <efi_load_initrd.h>
-
-static struct efi_boot_services *boottime;
-
-static struct efi_initrd_dp dp = {
-	.vendor = {
-		{
-		   DEVICE_PATH_TYPE_MEDIA_DEVICE,
-		   DEVICE_PATH_SUB_TYPE_VENDOR_PATH,
-		   sizeof(dp.vendor),
-		},
-		EFI_INITRD_MEDIA_GUID,
-	},
-	.end = {
-		DEVICE_PATH_TYPE_END,
-		DEVICE_PATH_SUB_TYPE_END,
-		sizeof(dp.end),
-	}
-};
-
-static struct efi_initrd_dp dp_invalid = {
-	.vendor = {
-		{
-		   DEVICE_PATH_TYPE_MEDIA_DEVICE,
-		   DEVICE_PATH_SUB_TYPE_VENDOR_PATH,
-		   sizeof(dp.vendor),
-		},
-		EFI_INITRD_MEDIA_GUID,
-	},
-	.end = {
-		0x8f, /* invalid */
-		0xfe, /* invalid */
-		sizeof(dp.end),
-	}
-};
-
-static int setup(const efi_handle_t handle,
-		 const struct efi_system_table *systable)
-{
-	boottime = systable->boottime;
-
-	return EFI_ST_SUCCESS;
-}
-
-static int execute(void)
-{
-	struct efi_load_file_protocol *lf2;
-	struct efi_device_path *dp2, *dp2_invalid;
-	efi_status_t status;
-	efi_handle_t handle;
-	char buffer[64];
-	efi_uintn_t buffer_size;
-	void *buf;
-	u32 crc32;
-
-	memset(buffer, 0, sizeof(buffer));
-
-	dp2 = (struct efi_device_path *)&dp;
-	status = boottime->locate_device_path(&efi_guid_load_file2_protocol,
-					      &dp2, &handle);
-	if (status != EFI_SUCCESS) {
-		efi_st_error("Unable to locate device path\n");
-		return EFI_ST_FAILURE;
-	}
-
-	status = boottime->handle_protocol(handle,
-					   &efi_guid_load_file2_protocol,
-					   (void **)&lf2);
-	if (status != EFI_SUCCESS) {
-		efi_st_error("Unable to locate protocol\n");
-		return EFI_ST_FAILURE;
-	}
-
-	/* Case 1:
-	 * buffer_size can't be NULL
-	 * protocol can't be NULL
-	 */
-	status = lf2->load_file(lf2, dp2, false, NULL, &buffer);
-	if (status != EFI_INVALID_PARAMETER) {
-		efi_st_error("Buffer size can't be NULL\n");
-		return EFI_ST_FAILURE;
-	}
-	buffer_size = sizeof(buffer);
-	status = lf2->load_file(NULL, dp2, false, &buffer_size, &buffer);
-	if (status != EFI_INVALID_PARAMETER) {
-		efi_st_error("Protocol can't be NULL\n");
-		return EFI_ST_FAILURE;
-	}
-
-	/*
-	 * Case 2: Match end node type/sub-type on device path
-	 */
-	dp2_invalid = (struct efi_device_path *)&dp_invalid;
-	buffer_size = sizeof(buffer);
-	status = lf2->load_file(lf2, dp2_invalid, false, &buffer_size, &buffer);
-	if (status != EFI_INVALID_PARAMETER) {
-		efi_st_error("Invalid device path type must return EFI_INVALID_PARAMETER\n");
-		return EFI_ST_FAILURE;
-	}
-
-	status = lf2->load_file(lf2, dp2_invalid, false, &buffer_size, &buffer);
-	if (status != EFI_INVALID_PARAMETER) {
-		efi_st_error("Invalid device path sub-type must return EFI_INVALID_PARAMETER\n");
-		return EFI_ST_FAILURE;
-	}
-
-	/*
-	 * Case 3:
-	 * BootPolicy 'true' must return EFI_UNSUPPORTED
-	 */
-	buffer_size = sizeof(buffer);
-	status = lf2->load_file(lf2, dp2, true, &buffer_size, &buffer);
-	if (status != EFI_UNSUPPORTED) {
-		efi_st_error("BootPolicy true must return EFI_UNSUPPORTED\n");
-		return EFI_ST_FAILURE;
-	}
-
-	/*
-	 * Case: Pass buffer size as zero, firmware must return
-	 * EFI_BUFFER_TOO_SMALL and an appropriate size
-	 */
-	buffer_size = 0;
-	status = lf2->load_file(lf2, dp2, false, &buffer_size, NULL);
-	if (status != EFI_BUFFER_TOO_SMALL || !buffer_size) {
-		efi_st_printf("buffer_size: %u\n", (unsigned int)buffer_size);
-		efi_st_printf("status: %x\n", (unsigned int)status);
-		efi_st_error("Buffer size not updated\n");
-		return EFI_ST_FAILURE;
-	}
-
-	/*
-	 * Case: Pass buffer size as smaller than the file_size,
-	 * firmware must return * EFI_BUFFER_TOO_SMALL and an appropriate size
-	 */
-	buffer_size = 1;
-	status = lf2->load_file(lf2, dp2, false, &buffer_size, &buffer);
-	if (status != EFI_BUFFER_TOO_SMALL || buffer_size <= 1) {
-		efi_st_error("Buffer size not updated\n");
-		return EFI_ST_FAILURE;
-	}
-
-	status = boottime->allocate_pool(EFI_BOOT_SERVICES_DATA, buffer_size,
-					 &buf);
-	if (status != EFI_SUCCESS) {
-		efi_st_error("Cannot allocate buffer\n");
-		return EFI_ST_FAILURE;
-	}
-
-	/* Case: Pass correct buffer, load the file and verify checksum*/
-	status = lf2->load_file(lf2, dp2, false, &buffer_size, buf);
-	if (status != EFI_SUCCESS) {
-		efi_st_error("Loading initrd failed\n");
-		return EFI_ST_FAILURE;
-	}
-
-	efi_st_printf("Loaded %u bytes\n", (unsigned int)buffer_size);
-	status = boottime->calculate_crc32(buf, buffer_size, &crc32);
-	if (status != EFI_SUCCESS) {
-		efi_st_error("Could not determine CRC32\n");
-		return EFI_ST_FAILURE;
-	}
-	efi_st_printf("CRC32 %.8x\n", (unsigned int)crc32);
-
-	status = boottime->free_pool(buf);
-	if (status != EFI_SUCCESS) {
-		efi_st_error("Cannot free buffer\n");
-		return EFI_ST_FAILURE;
-	}
-
-	return EFI_ST_SUCCESS;
-}
-
-EFI_UNIT_TEST(load_initrd) = {
-	.name = "load initrd",
-	.phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
-	.setup = setup,
-	.execute = execute,
-	.on_request = true,
-};
diff --git a/lib/efi_selftest/initrddump.c b/lib/efi_selftest/initrddump.c
index c23a05c..325951b 100644
--- a/lib/efi_selftest/initrddump.c
+++ b/lib/efi_selftest/initrddump.c
@@ -272,7 +272,7 @@ static efi_status_t get_initrd(void **initrd, efi_uintn_t *initrd_size)
 		error(L"Out of memory\r\n");
 		return ret;
 	}
-	*initrd = (void *)buffer;
+	*initrd = (void *)(uintptr_t)buffer;
 	ret = load_file2_prot->load_file(load_file2_prot, dp, false,
 					 initrd_size, *initrd);
 	if (ret != EFI_SUCCESS) {
diff --git a/tools/mkeficapsule.c b/tools/mkeficapsule.c
index 1613e74..f272512 100644
--- a/tools/mkeficapsule.c
+++ b/tools/mkeficapsule.c
@@ -278,7 +278,7 @@ static int create_fwbin(char *path, char *bin, efi_guid_t *guid,
 	}
 	data = malloc(bin_stat.st_size);
 	if (!data) {
-		printf("cannot allocate memory: %lx\n", bin_stat.st_size);
+		printf("cannot allocate memory: %zx\n", (size_t)bin_stat.st_size);
 		goto err_1;
 	}
 	f = fopen(path, "w");
@@ -297,7 +297,7 @@ static int create_fwbin(char *path, char *bin, efi_guid_t *guid,
 
 	size = fwrite(&header, 1, sizeof(header), f);
 	if (size < sizeof(header)) {
-		printf("write failed (%lx)\n", size);
+		printf("write failed (%zx)\n", size);
 		goto err_3;
 	}
 
@@ -306,13 +306,13 @@ static int create_fwbin(char *path, char *bin, efi_guid_t *guid,
 	capsule.payload_item_count = 1;
 	size = fwrite(&capsule, 1, sizeof(capsule), f);
 	if (size < (sizeof(capsule))) {
-		printf("write failed (%lx)\n", size);
+		printf("write failed (%zx)\n", size);
 		goto err_3;
 	}
 	offset = sizeof(capsule) + sizeof(u64);
 	size = fwrite(&offset, 1, sizeof(offset), f);
 	if (size < sizeof(offset)) {
-		printf("write failed (%lx)\n", size);
+		printf("write failed (%zx)\n", size);
 		goto err_3;
 	}
 
@@ -329,17 +329,17 @@ static int create_fwbin(char *path, char *bin, efi_guid_t *guid,
 
 	size = fwrite(&image, 1, sizeof(image), f);
 	if (size < sizeof(image)) {
-		printf("write failed (%lx)\n", size);
+		printf("write failed (%zx)\n", size);
 		goto err_3;
 	}
 	size = fread(data, 1, bin_stat.st_size, g);
 	if (size < bin_stat.st_size) {
-		printf("read failed (%lx)\n", size);
+		printf("read failed (%zx)\n", size);
 		goto err_3;
 	}
 	size = fwrite(data, 1, bin_stat.st_size, f);
 	if (size < bin_stat.st_size) {
-		printf("write failed (%lx)\n", size);
+		printf("write failed (%zx)\n", size);
 		goto err_3;
 	}