aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAdam Ford <aford173@gmail.com>2016-03-07 21:08:49 -0600
committerTom Rini <trini@konsulko.com>2016-03-14 19:18:48 -0400
commit2f6ed3b89a1760ffa73123fb266de3d56eb5d88e (patch)
tree38a711b472ebcf1f9c700f7a18cf005bcb610a2f
parente850ed82bce86323939b5ce8e53f0f11a66e02a9 (diff)
downloadu-boot-2f6ed3b89a1760ffa73123fb266de3d56eb5d88e.zip
u-boot-2f6ed3b89a1760ffa73123fb266de3d56eb5d88e.tar.gz
u-boot-2f6ed3b89a1760ffa73123fb266de3d56eb5d88e.tar.bz2
ARM: Various: Future-proof serial platdata
A few boards still use ns16550_platdata structures, but assume the structure is going to be in a specific order. By explicitly naming each entry, this should also help 'future-proof' in the event the structure changes. Tested on the Logic PD Torpedo + Wireless. I only changed a handful of devices that used the same syntax as the Logic board. Appologies if I missed one or stepped on toes. Thanks to Derald Woods and Alexander Graf. Signed-off-by: Adam Ford <aford173@gmail.com> V6: Add fix to arch/arm/cpu/armv7/am33xx/board.c V5: Add fix to arch/arm/cpu/arm926ejs/lpc32xx/devices.c V4: Fix subject heading V3: Remove reg_offset out in all the structs. It was reverted out, and and if it did exist, it would get initialized to 0 by default. V2: I hastily copy-pasted the boards without looking at the UART number. This addresses 3 boards that use UART3 and not UART1. Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
-rw-r--r--arch/arm/cpu/arm926ejs/lpc32xx/devices.c8
-rw-r--r--arch/arm/cpu/armv7/am33xx/board.c12
-rw-r--r--board/isee/igep00x0/igep00x0.c6
-rw-r--r--board/logicpd/omap3som/omap3logic.c6
-rw-r--r--board/logicpd/zoom1/zoom1.c6
-rw-r--r--board/overo/overo.c6
-rw-r--r--board/quipos/cairo/cairo.c6
-rw-r--r--board/ti/beagle/beagle.c6
-rw-r--r--board/timll/devkit8000/devkit8000.c6
9 files changed, 31 insertions, 31 deletions
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
index b6db23e..399b07c 100644
--- a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
@@ -45,10 +45,10 @@ void lpc32xx_uart_init(unsigned int uart_id)
#if !CONFIG_IS_ENABLED(OF_CONTROL)
static const struct ns16550_platdata lpc32xx_uart[] = {
- { UART3_BASE, 2, CONFIG_SYS_NS16550_CLK },
- { UART4_BASE, 2, CONFIG_SYS_NS16550_CLK },
- { UART5_BASE, 2, CONFIG_SYS_NS16550_CLK },
- { UART6_BASE, 2, CONFIG_SYS_NS16550_CLK },
+ { .base = UART3_BASE, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
+ { .base = UART4_BASE, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
+ { .base = UART5_BASE, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
+ { .base = UART6_BASE, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
};
#if defined(CONFIG_LPC32XX_HSUART)
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index e8d5be3..a99cbf9 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -40,14 +40,14 @@ DECLARE_GLOBAL_DATA_PTR;
#if !CONFIG_IS_ENABLED(OF_CONTROL)
static const struct ns16550_platdata am33xx_serial[] = {
- { CONFIG_SYS_NS16550_COM1, 2, CONFIG_SYS_NS16550_CLK },
+ { .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
# ifdef CONFIG_SYS_NS16550_COM2
- { CONFIG_SYS_NS16550_COM2, 2, CONFIG_SYS_NS16550_CLK },
+ { .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
# ifdef CONFIG_SYS_NS16550_COM3
- { CONFIG_SYS_NS16550_COM3, 2, CONFIG_SYS_NS16550_CLK },
- { CONFIG_SYS_NS16550_COM4, 2, CONFIG_SYS_NS16550_CLK },
- { CONFIG_SYS_NS16550_COM5, 2, CONFIG_SYS_NS16550_CLK },
- { CONFIG_SYS_NS16550_COM6, 2, CONFIG_SYS_NS16550_CLK },
+ { .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
+ { .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
+ { .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
+ { .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
# endif
# endif
};
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index e2fce50..d1a6a6f 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -34,9 +34,9 @@ static const u32 gpmc_lan_config[] = {
#endif
static const struct ns16550_platdata igep_serial = {
- OMAP34XX_UART3,
- 2,
- V_NS16550_CLK
+ .base = OMAP34XX_UART3,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK
};
U_BOOT_DEVICE(igep_uart) = {
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index 668f684..51d2987 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -47,9 +47,9 @@ DECLARE_GLOBAL_DATA_PTR;
*/
static const struct ns16550_platdata omap3logic_serial = {
- OMAP34XX_UART1,
- 2,
- V_NS16550_CLK
+ .base = OMAP34XX_UART1,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK
};
U_BOOT_DEVICE(omap3logic_uart) = {
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c
index 4040114..982619c 100644
--- a/board/logicpd/zoom1/zoom1.c
+++ b/board/logicpd/zoom1/zoom1.c
@@ -44,9 +44,9 @@ static const u32 gpmc_lab_enet[] = {
};
static const struct ns16550_platdata zoom1_serial = {
- OMAP34XX_UART3,
- 2,
- V_NS16550_CLK
+ .base = OMAP34XX_UART3,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK
};
U_BOOT_DEVICE(zoom1_uart) = {
diff --git a/board/overo/overo.c b/board/overo/overo.c
index a38b959..40f13e5 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -68,9 +68,9 @@ static struct {
} expansion_config = {0x0};
static const struct ns16550_platdata overo_serial = {
- OMAP34XX_UART3,
- 2,
- V_NS16550_CLK
+ .base = OMAP34XX_UART3,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK
};
U_BOOT_DEVICE(overo_uart) = {
diff --git a/board/quipos/cairo/cairo.c b/board/quipos/cairo/cairo.c
index 21793e8..77e4482 100644
--- a/board/quipos/cairo/cairo.c
+++ b/board/quipos/cairo/cairo.c
@@ -91,9 +91,9 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
#endif
static const struct ns16550_platdata cairo_serial = {
- OMAP34XX_UART2,
- 2,
- V_NS16550_CLK
+ .base = OMAP34XX_UART2,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK
};
U_BOOT_DEVICE(cairo_uart) = {
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index ff317ef..0ed4f52 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -73,9 +73,9 @@ static struct {
} expansion_config;
static const struct ns16550_platdata beagle_serial = {
- OMAP34XX_UART3,
- 2,
- V_NS16550_CLK
+ .base = OMAP34XX_UART3,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK
};
U_BOOT_DEVICE(beagle_uart) = {
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index 1a447c7..965252f 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -46,9 +46,9 @@ static u32 gpmc_net_config[GPMC_MAX_REG] = {
};
static const struct ns16550_platdata devkit8000_serial = {
- OMAP34XX_UART3,
- 2,
- V_NS16550_CLK
+ .base = OMAP34XX_UART3,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK
};
U_BOOT_DEVICE(devkit8000_uart) = {