armv8: ls1046ardb: Add falcon mode for for QSPI boot

A new defconfig is introduced to support SPL boot from QSPI NOR
flash. This is to support falcon mode for faster booting into
Linux.

Signed-off-by: York Sun <york.sun@nxp.com>

7 files changed, 136 insertions, 6 deletions

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
index a00b5bc..7dae9f0 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
@@ -129,6 +129,16 @@ Example:
 
 The "loadables" is not optional. It tells SPL which images to load into memory.
 
+Falcon mode with QSPI boot
+--------------------------
+To use falcon mode with QSPI boot, SPL needs to be enabled. Similar to SD or
+NAND boot, a RAM version full feature U-Boot is needed. Unlike SD or NAND boot,
+SPL with QSPI doesn't need to combine SPL image with RAM version image. Two
+separated images are used, u-boot-spl.pbl and u-boot.img. The former is SPL
+image with RCW and PBI commands to load the SPL payload into On-Chip RAM. The
+latter is RAM version U-Boot in FIT format (or legacy format if FIT is not
+used).
+
 Other things to consider
 -----------------------
 Falcon boot skips a lot of initialization in U-Boot. If Linux expects the
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index 3bb6e5b..3e53084 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -23,6 +23,9 @@ u32 spl_boot_device(void)
 #ifdef CONFIG_SPL_NAND_SUPPORT
 	return BOOT_DEVICE_NAND;
 #endif
+#ifdef CONFIG_QSPI_BOOT
+	return BOOT_DEVICE_NOR;
+#endif
 	return 0;
 }
 
diff --git a/board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg b/board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg
new file mode 100644
index 0000000..735d46c
--- /dev/null
+++ b/board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg
@@ -0,0 +1,26 @@
+#QSPI clk
+0957015c 40100000
+#Configure Scratch register
+09570600 00000000
+09570604 10000000
+#Disable CCI barrier tranaction
+09570178 0000e010
+09180000 00000008
+#USB PHY frequency sel
+09570418 0000009e
+0957041c 0000009e
+09570420 0000009e
+#Serdes SATA
+09eb1300 80104e20
+09eb08dc 00502880
+#PEX gen3 link
+09570158 00000300
+89400890 01048000
+89500890 01048000
+89600890 01048000
+#Alt base register
+09570158 00001000
+#flush PBI data
+096100c0 000fffff
+#Change endianness
+09550000 000f400c
diff --git a/board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg b/board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg
new file mode 100644
index 0000000..7b9be0a
--- /dev/null
+++ b/board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# RCW
+0c150010 0e000000 00000000 00000000
+11335559 40005012 40025000 c1000000
+00000000 00000000 00000000 00238800
+20124000 00003101 00000096 00000001
diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig
new file mode 100644
index 0000000..5a5ae3a
--- /dev/null
+++ b/configs/ls1046ardb_qspi_spl_defconfig
@@ -0,0 +1,65 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046ARDB=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_FSL_LS_PPA=y
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_NOR_SUPPORT=y
+CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_OS_BASE=0x40980000
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_CMD_SPL=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_MP=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SPL_ENV_IS_NOWHERE=y
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI_FLASH=y
+CONFIG_PHYLIB=y
+CONFIG_NETDEVICES=y
+CONFIG_PHY_GIGE=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_SPL_GZIP=y
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index fda3f3b..cdb73f6 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -16,11 +16,11 @@
 #define SPL_NO_USB
 #define SPL_NO_SATA
 #endif
-#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT))
+#if defined(CONFIG_SPL_BUILD) && \
+	(defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
 #define SPL_NO_MMC
 #endif
 #if defined(CONFIG_SPL_BUILD)		&& \
-	defined(CONFIG_SD_BOOT)		&& \
 	!defined(CONFIG_SPL_FSL_LS_PPA)
 #define SPL_NO_IFC
 #endif
@@ -84,6 +84,21 @@
 #endif /* ifdef CONFIG_SECURE_BOOT */
 #endif
 
+#if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL)
+#define CONFIG_SPL_TARGET		"spl/u-boot-spl.pbl"
+#define CONFIG_SPL_TEXT_BASE		0x10000000
+#define CONFIG_SPL_MAX_SIZE		0x1f000
+#define CONFIG_SPL_STACK		0x10020000
+#define CONFIG_SPL_PAD_TO		0x20000
+#define CONFIG_SPL_BSS_START_ADDR	0x8f000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
+					CONFIG_SPL_BSS_MAX_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
+#define CONFIG_SYS_MONITOR_LEN		0x100000
+#define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
+#endif
+
 /* NAND SPL */
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SPL_PBL_PAD
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index 2d45bbc..87d8cf5 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -31,17 +31,21 @@
 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
 #endif
 
-#ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
-#endif
-
 #ifdef CONFIG_SD_BOOT
+#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
 #ifdef CONFIG_EMMC_BOOT
 #define CONFIG_SYS_FSL_PBL_RCW \
 	board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg
 #else
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg
 #endif
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_SYS_FSL_PBL_RCW \
+	board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg
+#define CONFIG_SYS_FSL_PBL_PBI \
+	board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg
+#define CONFIG_SYS_UBOOT_BASE		0x40100000
+#define CONFIG_SYS_SPL_ARGS_ADDR	0x90000000
 #endif
 
 #ifndef SPL_NO_IFC