Merge tag 'u-boot-rockchip-20230814' of https://source.denx.de/u-boot/custodians/u-boot-rockchipWIP/14Aug2023

- Add board: rk3568 EmbedFire Lubancat 2
- Fixes for rk3568 clock and pinctrl;
- Fixes for rk3308 clock and uart;
- rk3328 rock64 updates;
- Video fix on veyron board;

25 files changed, 1085 insertions, 119 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index bd51806..64c885d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -178,6 +178,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \
 	rk3566-soquartz-cm4.dtb \
 	rk3566-soquartz-model-a.dtb \
 	rk3568-evb.dtb \
+	rk3568-lubancat-2.dtb \
 	rk3568-nanopi-r5c.dtb \
 	rk3568-nanopi-r5s.dtb \
 	rk3568-odroid-m1.dtb \
diff --git a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
index 09694b4..d88dee8 100644
--- a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
+++ b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
@@ -12,6 +12,31 @@
 
 &uart0 {
 	bootph-all;
-	clock-frequency = <24000000>;
-	status = "okay";
+};
+
+&pinctrl {
+	bootph-some-ram;
+
+	uart0 {
+		bootph-some-ram;
+	};
+	rtc {
+		bootph-some-ram;
+	};
+};
+
+&uart0_xfer {
+	bootph-some-ram;
+};
+
+&uart0_cts {
+	bootph-some-ram;
+};
+
+&uart0_rts {
+	bootph-some-ram;
+};
+
+&rtc_32k {
+	bootph-some-ram;
 };
diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
index 8498543..6904515 100644
--- a/arch/arm/dts/rk3328-rock64-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
@@ -54,7 +54,7 @@
 };
 
 &spi0 {
-	spi_flash: spiflash@0 {
+	spi_flash: flash@0 {
 		bootph-all;
 	};
 };
diff --git a/arch/arm/dts/rk3328-rock64.dts b/arch/arm/dts/rk3328-rock64.dts
index 1b0f7e4..f69a38f 100644
--- a/arch/arm/dts/rk3328-rock64.dts
+++ b/arch/arm/dts/rk3328-rock64.dts
@@ -345,7 +345,7 @@
 &spi0 {
 	status = "okay";
 
-	spiflash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 
diff --git a/arch/arm/dts/rk3328-u-boot.dtsi b/arch/arm/dts/rk3328-u-boot.dtsi
index ce96ce4..a9f2536 100644
--- a/arch/arm/dts/rk3328-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-u-boot.dtsi
@@ -26,6 +26,12 @@
 		       0x0 0xff720000 0x0 0x1000
 		       0x0 0xff798000 0x0 0x1000>;
 	};
+
+	rng: rng@ff060000 {
+		compatible = "rockchip,cryptov1-rng";
+		reg = <0x0 0xff060000 0x0 0x4000>;
+		status = "okay";
+	};
 };
 
 &cru {
diff --git a/arch/arm/dts/rk3568-lubancat-2-u-boot.dtsi b/arch/arm/dts/rk3568-lubancat-2-u-boot.dtsi
new file mode 100644
index 0000000..27c6277
--- /dev/null
+++ b/arch/arm/dts/rk3568-lubancat-2-u-boot.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2023 Rockchip Electronics Co., Ltd
+ * (C) Copyright 2023 Andy Yan <andyshrk@163.com>
+ */
+
+#include "rk356x-u-boot.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&sdhci {
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+};
+
+&uart2 {
+	bootph-all;
+	clock-frequency = <24000000>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/rk3568-lubancat-2.dts b/arch/arm/dts/rk3568-lubancat-2.dts
new file mode 100644
index 0000000..e653b06
--- /dev/null
+++ b/arch/arm/dts/rk3568-lubancat-2.dts
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 EmbedFire <embedfire@embedfire.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "EmbedFire LubanCat 2";
+	compatible = "embedfire,lubancat-2", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led: user-led {
+			label = "user_led";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+			gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led_pin>;
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	dc_5v: dc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+	};
+
+	vcc3v3_m2_pcie: vcc3v3-m2-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "m2_pcie_3v3";
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc3v3_m2_pcie_en>;
+		pinctrl-names = "default";
+		startup-delay-us = <200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_mini_pcie: vcc3v3-mini-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "minipcie_3v3";
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc3v3_mini_pcie_en>;
+		pinctrl-names = "default";
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb20_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_usb20_host_en>;
+		pinctrl-names = "default";
+	};
+
+	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb30_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_usb30_host_en>;
+		pinctrl-names = "default";
+	};
+
+	vcc5v0_otg_vbus: vcc5v0-otg-vbus-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg_vbus";
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_otg_vbus_en>;
+		pinctrl-names = "default";
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-init-microvolt = <900000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-init-microvolt = <900000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-init-microvolt = <900000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	clock_in_out = "output";
+
+	snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+
+	tx_delay = <0x22>;
+	rx_delay = <0x0e>;
+
+	phy-handle = <&rgmii_phy0>;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&gmac1 {
+	phy-mode = "rgmii";
+	clock_in_out = "output";
+
+	snps,reset-gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+
+	tx_delay = <0x21>;
+	rx_delay = <0x0e>;
+
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&gic {
+	mbi-ranges = <94 31>, <229 31>, <289 31>;
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x2 {
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_m2_pcie>;
+	status = "okay";
+};
+
+&pcie2x1 {
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+	disable-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_mini_pcie>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm8 {
+	status = "okay";
+};
+
+&pwm9 {
+	status = "disabled";
+};
+
+&pwm10 {
+	status = "disabled";
+};
+
+&pwm14 {
+	status = "disabled";
+};
+
+&spi3 {
+	pinctrl-0 = <&spi3m1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3m1_xfer>;
+	status = "disabled";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&sdhci {
+	assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>;
+	assigned-clock-rates = <200000000>, <24000000>, <200000000>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+	supports-emmc;
+	status = "okay";
+};
+
+&sdmmc0 {
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	status = "okay";
+};
+
+/* USB OTG/USB Host_1 USB 2.0 Comb */
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_otg_vbus>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+/* USB Host_2/USB Host_3 USB 2.0 Comb */
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb20_host>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+/* MULTI_PHY0 For SATA0, USB3.0 OTG Only USB2.0 */
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	extcon = <&usb2phy0>;
+	maximum-speed = "high-speed";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+/* USB3.0 Host */
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&pinctrl {
+	leds {
+		user_led_pin: user-status-led-pin {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
+			rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_otg_vbus_en: vcc5v0-otg-vbus-en {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		vcc3v3_m2_pcie_en: vcc3v3-m2-pcie-en {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc3v3_mini_pcie_en: vcc3v3-mini-pcie-en {
+			rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm/dts/rk356x-u-boot.dtsi b/arch/arm/dts/rk356x-u-boot.dtsi
index d21b182..32f687f 100644
--- a/arch/arm/dts/rk356x-u-boot.dtsi
+++ b/arch/arm/dts/rk356x-u-boot.dtsi
@@ -126,12 +126,11 @@
 
 &sdhci {
 	bootph-pre-ram;
-	status = "okay";
+	max-frequency = <200000000>;
 };
 
 &sdmmc0 {
 	bootph-pre-ram;
-	status = "okay";
 };
 
 #ifdef CONFIG_ROCKCHIP_SPI_IMAGE
diff --git a/arch/arm/include/asm/arch-rk3308/cru_rk3308.h b/arch/arm/include/asm/arch-rk3308/cru_rk3308.h
index 86c906b..84b63e4 100644
--- a/arch/arm/include/asm/arch-rk3308/cru_rk3308.h
+++ b/arch/arm/include/asm/arch-rk3308/cru_rk3308.h
@@ -189,6 +189,21 @@ enum {
 	DCLK_VOP_DIV_SHIFT	= 0,
 	DCLK_VOP_DIV_MASK	= 0xff,
 
+	/* CRU_CLKSEL_CON10 */
+	/* CRU_CLKSEL_CON13 */
+	/* CRU_CLKSEL_CON16 */
+	/* CRU_CLKSEL_CON19 */
+	/* CRU_CLKSEL_CON22 */
+	CLK_UART_PLL_SEL_SHIFT		= 13,
+	CLK_UART_PLL_SEL_MASK		= 0x7 << CLK_UART_PLL_SEL_SHIFT,
+	CLK_UART_PLL_SEL_DPLL		= 0,
+	CLK_UART_PLL_SEL_VPLL0,
+	CLK_UART_PLL_SEL_VPLL1,
+	CLK_UART_PLL_SEL_480M,
+	CLK_UART_PLL_SEL_24M,
+	CLK_UART_DIV_CON_SHIFT		= 0,
+	CLK_UART_DIV_CON_MASK		= 0x1f << CLK_UART_DIV_CON_SHIFT,
+
 	/* CRU_CLK_SEL25_CON */
 	/* CRU_CLK_SEL26_CON */
 	/* CRU_CLK_SEL27_CON */
diff --git a/arch/arm/include/asm/arch-rockchip/cru.h b/arch/arm/include/asm/arch-rockchip/cru.h
index 13ea4ab..9778790 100644
--- a/arch/arm/include/asm/arch-rockchip/cru.h
+++ b/arch/arm/include/asm/arch-rockchip/cru.h
@@ -15,6 +15,8 @@
 # include <asm/arch-rockchip/cru_rk3288.h>
 #elif defined(CONFIG_ROCKCHIP_RK3399)
 # include <asm/arch-rockchip/cru_rk3399.h>
+#elif defined(CONFIG_ROCKCHIP_RK3568)
+#include <asm/arch-rockchip/cru_rk3568.h>
 #endif
 
 /* CRU_GLB_RST_ST */
diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3568.h b/arch/arm/include/asm/arch-rockchip/cru_rk3568.h
index 399f19a..9c7ddd7 100644
--- a/arch/arm/include/asm/arch-rockchip/cru_rk3568.h
+++ b/arch/arm/include/asm/arch-rockchip/cru_rk3568.h
@@ -106,6 +106,8 @@ struct rk3568_cru {
 	unsigned int emmc_con[2];/* Address Offset: 0x0598 */
 };
 
+#define rockchip_cru rk3568_cru
+
 check_member(rk3568_cru, mode_con00, 0xc0);
 check_member(rk3568_cru, softrst_con[0], 0x400);
 
@@ -493,7 +495,7 @@ enum {
 
 	/* CRU_CLK_SEL81_CON */
 	CPLL_25M_DIV_SHIFT		= 8,
-	CPLL_25M_DIV_MASK		= 0x1f << CPLL_25M_DIV_SHIFT,
+	CPLL_25M_DIV_MASK		= 0x3f << CPLL_25M_DIV_SHIFT,
 	CPLL_50M_DIV_SHIFT		= 0,
 	CPLL_50M_DIV_MASK		= 0x1f << CPLL_50M_DIV_SHIFT,
 
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 49da93d..a279582 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -359,6 +359,7 @@ config ROCKCHIP_RV1126
 	select PMIC_RK8XX
 	select BOARD_LATE_INIT
 	imply ROCKCHIP_COMMON_BOARD
+	imply OF_LIBFDT_OVERLAY
 	imply TPL_DM
 	imply TPL_LIBCOMMON_SUPPORT
 	imply TPL_LIBGENERIC_SUPPORT
diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c
index a7cc91a..cbd2ea0 100644
--- a/arch/arm/mach-rockchip/rk3399/rk3399.c
+++ b/arch/arm/mach-rockchip/rk3399/rk3399.c
@@ -280,15 +280,5 @@ void spl_board_init(void)
 		if (cru->glb_rst_st != 0)
 			rk3399_force_power_on_reset();
 	}
-
-	if (IS_ENABLED(CONFIG_SPL_DM_REGULATOR)) {
-		/*
-		 * Turning the eMMC and SPI back on (if disabled via the Qseven
-		 * BIOS_ENABLE) signal is done through a always-on regulator).
-		 */
-		if (regulators_enable_boot_on(false))
-			debug("%s: Cannot enable boot on regulator\n",
-			      __func__);
-	}
 }
 #endif
diff --git a/arch/arm/mach-rockchip/spl.c b/arch/arm/mach-rockchip/spl.c
index 30be640..87280e2 100644
--- a/arch/arm/mach-rockchip/spl.c
+++ b/arch/arm/mach-rockchip/spl.c
@@ -112,19 +112,6 @@ void board_init_f(ulong dummy)
 {
 	int ret;
 
-#ifdef CONFIG_DEBUG_UART
-	/*
-	 * Debug UART can be used from here if required:
-	 *
-	 * debug_uart_init();
-	 * printch('a');
-	 * printhex8(0x1234);
-	 * printascii("string");
-	 */
-	debug_uart_init();
-	debug("\nspl:debug uart enabled in %s\n", __func__);
-#endif
-
 	board_early_init_f();
 
 	ret = spl_early_init();
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index cb44bc9..c7e412b 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -80,7 +80,7 @@ F:	configs/orangepi-rk3399_defconfig
 F:	arch/arm/dts/rk3399-u-boot.dtsi
 F:	arch/arm/dts/rk3399-orangepi-u-boot.dtsi
 
-RADXA ROCK 4C+
+ROCK-4C+
 M:	FUKAUMI Naoki <naoki@radxa.com>
 S:	Maintained
 F:	configs/rock-4c-plus-rk3399_defconfig
diff --git a/board/rockchip/evb_rk3568/MAINTAINERS b/board/rockchip/evb_rk3568/MAINTAINERS
index 82a92b8..1cdeafc 100644
--- a/board/rockchip/evb_rk3568/MAINTAINERS
+++ b/board/rockchip/evb_rk3568/MAINTAINERS
@@ -7,6 +7,13 @@ F:      configs/evb-rk3568_defconfig
 F:	arch/arm/dts/rk3568-evb-boot.dtsi
 F:	arch/arm/dts/rk3568-evb.dts
 
+Lubancat-2
+M:	Andy Yan <andyshrk@163.com>
+S:	Maintained
+F:	configs/lubancat-2-rk3568_defconfig
+F:	arch/arm/dts/rk3568-lubancat-2.dts
+F:	arch/arm/dts/rk3568-lubancat-2-u-boot.dtsi
+
 NANOPI-R5C
 M:      Tianling Shen <cnsztl@gmail.com>
 S:      Maintained
diff --git a/configs/lubancat-2-rk3568_defconfig b/configs/lubancat-2-rk3568_defconfig
new file mode 100644
index 0000000..b01d3bd
--- /dev/null
+++ b/configs/lubancat-2-rk3568_defconfig
@@ -0,0 +1,85 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_TEXT_BASE=0x00a00000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
+CONFIG_DEFAULT_DEVICE_TREE="rk3568-lubancat-2"
+CONFIG_ROCKCHIP_RK3568=y
+CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK=0x400000
+CONFIG_DEBUG_UART_BASE=0xFE660000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-lubancat-2.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x4000000
+CONFIG_SPL_BSS_MAX_SIZE=0x4000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+# CONFIG_SPI_FLASH is not set
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_ERRNO_STR=y
+CONFIG_EFI_VAR_BUF_SIZE=16384
diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
index 5e36612..c2641f6 100644
--- a/configs/rock64-rk3328_defconfig
+++ b/configs/rock64-rk3328_defconfig
@@ -72,8 +72,11 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
 CONFIG_MISC=y
+CONFIG_ROCKCHIP_EFUSE=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_ROCKCHIP=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index 49a0c57..31aeb85 100644
--- a/doc/board/rockchip/rockchip.rst
+++ b/doc/board/rockchip/rockchip.rst
@@ -95,6 +95,7 @@ List of mainline supported Rockchip boards:
 
 * rk3568
      - Rockchip Evb-RK3568 (evb-rk3568)
+     - EmbedFire Lubancat 2 (lubancat-2-rk3568_defconfig)
      - Hardkernel ODROID-M1 (odroid-m1-rk3568)
      - Pine64 Quartz64-A Board (quartz64-a-rk3566_defconfig)
      - Pine64 Quartz64-B Board (quartz64-b-rk3566_defconfig)
diff --git a/drivers/clk/rockchip/clk_rk3308.c b/drivers/clk/rockchip/clk_rk3308.c
index 64f3358..d0a3f65 100644
--- a/drivers/clk/rockchip/clk_rk3308.c
+++ b/drivers/clk/rockchip/clk_rk3308.c
@@ -150,7 +150,7 @@ static ulong rk3308_i2c_get_clk(struct clk *clk)
 	}
 
 	con = readl(&cru->clksel_con[con_id]);
-	div = con >> CLK_I2C_DIV_CON_SHIFT & CLK_I2C_DIV_CON_MASK;
+	div = (con & CLK_I2C_DIV_CON_MASK) >> CLK_I2C_DIV_CON_SHIFT;
 
 	return DIV_TO_RATE(priv->dpll_hz, div);
 }
@@ -314,7 +314,7 @@ static ulong rk3308_saradc_get_clk(struct clk *clk)
 	u32 div, con;
 
 	con = readl(&cru->clksel_con[34]);
-	div = con >> CLK_SARADC_DIV_CON_SHIFT & CLK_SARADC_DIV_CON_MASK;
+	div = (con & CLK_SARADC_DIV_CON_MASK) >> CLK_SARADC_DIV_CON_SHIFT;
 
 	return DIV_TO_RATE(OSC_HZ, div);
 }
@@ -342,7 +342,7 @@ static ulong rk3308_tsadc_get_clk(struct clk *clk)
 	u32 div, con;
 
 	con = readl(&cru->clksel_con[33]);
-	div = con >> CLK_SARADC_DIV_CON_SHIFT & CLK_SARADC_DIV_CON_MASK;
+	div = (con & CLK_SARADC_DIV_CON_MASK) >> CLK_SARADC_DIV_CON_SHIFT;
 
 	return DIV_TO_RATE(OSC_HZ, div);
 }
@@ -385,7 +385,7 @@ static ulong rk3308_spi_get_clk(struct clk *clk)
 	}
 
 	con = readl(&cru->clksel_con[con_id]);
-	div = con >> CLK_SPI_DIV_CON_SHIFT & CLK_SPI_DIV_CON_MASK;
+	div = (con & CLK_SPI_DIV_CON_MASK) >> CLK_SPI_DIV_CON_SHIFT;
 
 	return DIV_TO_RATE(priv->dpll_hz, div);
 }
@@ -429,7 +429,7 @@ static ulong rk3308_pwm_get_clk(struct clk *clk)
 	u32 div, con;
 
 	con = readl(&cru->clksel_con[29]);
-	div = con >> CLK_PWM_DIV_CON_SHIFT & CLK_PWM_DIV_CON_MASK;
+	div = (con & CLK_PWM_DIV_CON_MASK) >> CLK_PWM_DIV_CON_SHIFT;
 
 	return DIV_TO_RATE(priv->dpll_hz, div);
 }
@@ -451,6 +451,58 @@ static ulong rk3308_pwm_set_clk(struct clk *clk, uint hz)
 	return rk3308_pwm_get_clk(clk);
 }
 
+static ulong rk3308_uart_get_clk(struct clk *clk)
+{
+	struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
+	struct rk3308_cru *cru = priv->cru;
+	u32 div, pll_sel, con, con_id, parent;
+
+	switch (clk->id) {
+	case SCLK_UART0:
+		con_id = 10;
+		break;
+	case SCLK_UART1:
+		con_id = 13;
+		break;
+	case SCLK_UART2:
+		con_id = 16;
+		break;
+	case SCLK_UART3:
+		con_id = 19;
+		break;
+	case SCLK_UART4:
+		con_id = 22;
+		break;
+	default:
+		printf("do not support this uart interface\n");
+		return -EINVAL;
+	}
+
+	con = readl(&cru->clksel_con[con_id]);
+	pll_sel = (con & CLK_UART_PLL_SEL_MASK) >> CLK_UART_PLL_SEL_SHIFT;
+	div = (con & CLK_UART_DIV_CON_MASK) >> CLK_UART_DIV_CON_SHIFT;
+
+	switch (pll_sel) {
+	case CLK_UART_PLL_SEL_DPLL:
+		parent = priv->dpll_hz;
+		break;
+	case CLK_UART_PLL_SEL_VPLL0:
+		parent = priv->vpll0_hz;
+		break;
+	case CLK_UART_PLL_SEL_VPLL1:
+		parent = priv->vpll0_hz;
+		break;
+	case CLK_UART_PLL_SEL_24M:
+		parent = OSC_HZ;
+		break;
+	default:
+		printf("do not support this uart pll sel\n");
+		return -EINVAL;
+	}
+
+	return DIV_TO_RATE(parent, div);
+}
+
 static ulong rk3308_vop_get_clk(struct clk *clk)
 {
 	struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
@@ -813,6 +865,13 @@ static ulong rk3308_clk_get_rate(struct clk *clk)
 	case SCLK_EMMC_SAMPLE:
 		rate = rk3308_mmc_get_clk(clk);
 		break;
+	case SCLK_UART0:
+	case SCLK_UART1:
+	case SCLK_UART2:
+	case SCLK_UART3:
+	case SCLK_UART4:
+		rate = rk3308_uart_get_clk(clk);
+		break;
 	case SCLK_I2C0:
 	case SCLK_I2C1:
 	case SCLK_I2C2:
diff --git a/drivers/clk/rockchip/clk_rk3568.c b/drivers/clk/rockchip/clk_rk3568.c
index 0df82f5..599b7b1 100644
--- a/drivers/clk/rockchip/clk_rk3568.c
+++ b/drivers/clk/rockchip/clk_rk3568.c
@@ -702,7 +702,10 @@ static ulong rk3568_cpll_div_set_rate(struct rk3568_clk_priv *priv,
 	}
 
 	div = DIV_ROUND_UP(priv->cpll_hz, rate);
-	assert(div - 1 <= 31);
+	if (clk_id == CPLL_25M)
+		assert(div - 1 <= 63);
+	else
+		assert(div - 1 <= 31);
 	rk_clrsetreg(&cru->clksel_con[con],
 		     mask, (div - 1) << shift);
 	return rk3568_cpll_div_get_rate(priv, clk_id);
@@ -1142,7 +1145,7 @@ static ulong rk3568_pwm_get_clk(struct rk3568_clk_priv *priv, ulong clk_id)
 
 	switch (clk_id) {
 	case CLK_PWM1:
-		sel = (con & CLK_PWM1_SEL_MASK) >> CLK_PWM3_SEL_SHIFT;
+		sel = (con & CLK_PWM1_SEL_MASK) >> CLK_PWM1_SEL_SHIFT;
 		break;
 	case CLK_PWM2:
 		sel = (con & CLK_PWM2_SEL_MASK) >> CLK_PWM2_SEL_SHIFT;
@@ -2186,6 +2189,7 @@ static ulong rk3568_rkvdec_set_clk(struct rk3568_clk_priv *priv,
 
 	return rk3568_rkvdec_get_clk(priv, clk_id);
 }
+#endif
 
 static ulong rk3568_uart_get_rate(struct rk3568_clk_priv *priv, ulong clk_id)
 {
@@ -2321,7 +2325,6 @@ static ulong rk3568_uart_set_rate(struct rk3568_clk_priv *priv,
 
 	return rk3568_uart_get_rate(priv, clk_id);
 }
-#endif
 
 static ulong rk3568_clk_get_rate(struct clk *clk)
 {
@@ -2460,6 +2463,7 @@ static ulong rk3568_clk_get_rate(struct clk *clk)
 	case TCLK_WDT_NS:
 		rate = OSC_HZ;
 		break;
+#endif
 	case SCLK_UART1:
 	case SCLK_UART2:
 	case SCLK_UART3:
@@ -2471,7 +2475,6 @@ static ulong rk3568_clk_get_rate(struct clk *clk)
 	case SCLK_UART9:
 		rate = rk3568_uart_get_rate(priv, clk->id);
 		break;
-#endif
 	case ACLK_SECURE_FLASH:
 	case ACLK_CRYPTO_NS:
 	case HCLK_SECURE_FLASH:
@@ -2645,6 +2648,7 @@ static ulong rk3568_clk_set_rate(struct clk *clk, ulong rate)
 	case TCLK_WDT_NS:
 		ret = OSC_HZ;
 		break;
+#endif
 	case SCLK_UART1:
 	case SCLK_UART2:
 	case SCLK_UART3:
@@ -2656,7 +2660,6 @@ static ulong rk3568_clk_set_rate(struct clk *clk, ulong rate)
 	case SCLK_UART9:
 		ret = rk3568_uart_set_rate(priv, clk->id, rate);
 		break;
-#endif
 	case ACLK_SECURE_FLASH:
 	case ACLK_CRYPTO_NS:
 	case HCLK_SECURE_FLASH:
@@ -2840,6 +2843,10 @@ static int rk3568_clk_set_parent(struct clk *clk, struct clk *parent)
 	case CLK_RKVDEC_CORE:
 		return rk3568_rkvdec_set_parent(clk, parent);
 	case I2S1_MCLKOUT_TX:
+	case SCLK_GMAC0_RGMII_SPEED:
+	case SCLK_GMAC0_RMII_SPEED:
+	case SCLK_GMAC1_RGMII_SPEED:
+	case SCLK_GMAC1_RMII_SPEED:
 		break;
 	default:
 		return -ENOENT;
diff --git a/drivers/pci/pcie_rockchip.c b/drivers/pci/pcie_rockchip.c
index 72b4139..624841e 100644
--- a/drivers/pci/pcie_rockchip.c
+++ b/drivers/pci/pcie_rockchip.c
@@ -12,23 +12,15 @@
  */
 
 #include <common.h>
-#include <clk.h>
 #include <dm.h>
-#include <asm/global_data.h>
 #include <dm/device_compat.h>
 #include <generic-phy.h>
 #include <pci.h>
-#include <power-domain.h>
 #include <power/regulator.h>
 #include <reset.h>
-#include <syscon.h>
-#include <asm/io.h>
 #include <asm-generic/gpio.h>
-#include <asm/arch-rockchip/clock.h>
 #include <linux/iopoll.h>
 
-DECLARE_GLOBAL_DATA_PTR;
-
 #define HIWORD_UPDATE(mask, val)        (((mask) << 16) | (val))
 #define HIWORD_UPDATE_BIT(val)          HIWORD_UPDATE(val, val)
 
@@ -383,41 +375,38 @@ static int rockchip_pcie_set_vpcie(struct udevice *dev)
 	struct rockchip_pcie *priv = dev_get_priv(dev);
 	int ret;
 
-	if (priv->vpcie3v3) {
-		ret = regulator_set_enable(priv->vpcie3v3, true);
-		if (ret) {
-			dev_err(dev, "failed to enable vpcie3v3 (ret=%d)\n",
-				ret);
-			return ret;
-		}
+	ret = regulator_set_enable_if_allowed(priv->vpcie12v, true);
+	if (ret && ret != -ENOSYS) {
+		dev_err(dev, "failed to enable vpcie12v (ret=%d)\n", ret);
+		return ret;
 	}
 
-	if (priv->vpcie1v8) {
-		ret = regulator_set_enable(priv->vpcie1v8, true);
-		if (ret) {
-			dev_err(dev, "failed to enable vpcie1v8 (ret=%d)\n",
-				ret);
-			goto err_disable_3v3;
-		}
+	ret = regulator_set_enable_if_allowed(priv->vpcie3v3, true);
+	if (ret && ret != -ENOSYS) {
+		dev_err(dev, "failed to enable vpcie3v3 (ret=%d)\n", ret);
+		goto err_disable_12v;
 	}
 
-	if (priv->vpcie0v9) {
-		ret = regulator_set_enable(priv->vpcie0v9, true);
-		if (ret) {
-			dev_err(dev, "failed to enable vpcie0v9 (ret=%d)\n",
-				ret);
-			goto err_disable_1v8;
-		}
+	ret = regulator_set_enable_if_allowed(priv->vpcie1v8, true);
+	if (ret && ret != -ENOSYS) {
+		dev_err(dev, "failed to enable vpcie1v8 (ret=%d)\n", ret);
+		goto err_disable_3v3;
+	}
+
+	ret = regulator_set_enable_if_allowed(priv->vpcie0v9, true);
+	if (ret && ret != -ENOSYS) {
+		dev_err(dev, "failed to enable vpcie0v9 (ret=%d)\n", ret);
+		goto err_disable_1v8;
 	}
 
 	return 0;
 
 err_disable_1v8:
-	if (priv->vpcie1v8)
-		regulator_set_enable(priv->vpcie1v8, false);
+	regulator_set_enable_if_allowed(priv->vpcie1v8, false);
 err_disable_3v3:
-	if (priv->vpcie3v3)
-		regulator_set_enable(priv->vpcie3v3, false);
+	regulator_set_enable_if_allowed(priv->vpcie3v3, false);
+err_disable_12v:
+	regulator_set_enable_if_allowed(priv->vpcie12v, false);
 	return ret;
 }
 
@@ -427,19 +416,12 @@ static int rockchip_pcie_parse_dt(struct udevice *dev)
 	int ret;
 
 	priv->axi_base = dev_read_addr_name(dev, "axi-base");
-	if (!priv->axi_base)
-		return -ENODEV;
+	if (priv->axi_base == FDT_ADDR_T_NONE)
+		return -EINVAL;
 
 	priv->apb_base = dev_read_addr_name(dev, "apb-base");
-	if (!priv->axi_base)
-		return -ENODEV;
-
-	ret = gpio_request_by_name(dev, "ep-gpios", 0,
-				   &priv->ep_gpio, GPIOD_IS_OUT);
-	if (ret) {
-		dev_err(dev, "failed to find ep-gpios property\n");
-		return ret;
-	}
+	if (priv->apb_base == FDT_ADDR_T_NONE)
+		return -EINVAL;
 
 	ret = reset_get_by_name(dev, "core", &priv->core_rst);
 	if (ret) {
@@ -483,6 +465,13 @@ static int rockchip_pcie_parse_dt(struct udevice *dev)
 		return ret;
 	}
 
+	ret = device_get_supply_regulator(dev, "vpcie12v-supply",
+					  &priv->vpcie12v);
+	if (ret && ret != -ENOENT) {
+		dev_err(dev, "failed to get vpcie12v supply (ret=%d)\n", ret);
+		return ret;
+	}
+
 	ret = device_get_supply_regulator(dev, "vpcie3v3-supply",
 					  &priv->vpcie3v3);
 	if (ret && ret != -ENOENT) {
@@ -510,6 +499,13 @@ static int rockchip_pcie_parse_dt(struct udevice *dev)
 		return ret;
 	}
 
+	ret = gpio_request_by_name(dev, "ep-gpios", 0,
+				   &priv->ep_gpio, GPIOD_IS_OUT);
+	if (ret) {
+		dev_err(dev, "failed to find ep-gpios property\n");
+		return ret;
+	}
+
 	return 0;
 }
 
@@ -529,16 +525,26 @@ static int rockchip_pcie_probe(struct udevice *dev)
 
 	ret = rockchip_pcie_set_vpcie(dev);
 	if (ret)
-		return ret;
+		goto err_gpio_free;
 
 	ret = rockchip_pcie_init_port(dev);
 	if (ret)
-		return ret;
+		goto err_disable_vpcie;
 
 	dev_info(dev, "PCIE-%d: Link up (Bus%d)\n",
 		 dev_seq(dev), hose->first_busno);
 
 	return 0;
+
+err_disable_vpcie:
+	regulator_set_enable_if_allowed(priv->vpcie0v9, false);
+	regulator_set_enable_if_allowed(priv->vpcie1v8, false);
+	regulator_set_enable_if_allowed(priv->vpcie3v3, false);
+	regulator_set_enable_if_allowed(priv->vpcie12v, false);
+err_gpio_free:
+	if (dm_gpio_is_valid(&priv->ep_gpio))
+		dm_gpio_free(dev, &priv->ep_gpio);
+	return ret;
 }
 
 static const struct dm_pci_ops rockchip_pcie_ops = {
@@ -552,10 +558,10 @@ static const struct udevice_id rockchip_pcie_ids[] = {
 };
 
 U_BOOT_DRIVER(rockchip_pcie) = {
-	.name			= "rockchip_pcie",
-	.id			= UCLASS_PCI,
-	.of_match		= rockchip_pcie_ids,
-	.ops			= &rockchip_pcie_ops,
-	.probe			= rockchip_pcie_probe,
+	.name		= "rockchip_pcie",
+	.id		= UCLASS_PCI,
+	.of_match	= rockchip_pcie_ids,
+	.ops		= &rockchip_pcie_ops,
+	.probe		= rockchip_pcie_probe,
 	.priv_auto	= sizeof(struct rockchip_pcie),
 };
diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3568.c b/drivers/pinctrl/rockchip/pinctrl-rk3568.c
index 314edb5..1d43919 100644
--- a/drivers/pinctrl/rockchip/pinctrl-rk3568.c
+++ b/drivers/pinctrl/rockchip/pinctrl-rk3568.c
@@ -113,11 +113,9 @@ static int rk3568_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
 	struct rockchip_pinctrl_priv *priv = bank->priv;
 	int iomux_num = (pin / 8);
 	struct regmap *regmap;
-	int reg, ret, mask;
+	int reg, mask;
 	u8 bit;
-	u32 data;
-
-	debug("setting mux of GPIO%d-%d to %d\n", bank->bank_num, pin, mux);
+	u32 data, rmask;
 
 	if (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
 		regmap = priv->regmap_pmu;
@@ -131,10 +129,10 @@ static int rk3568_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
 	mask = 0xf;
 
 	data = (mask << (bit + 16));
+	rmask = data | (data >> 16);
 	data |= (mux & mask) << bit;
-	ret = regmap_write(regmap, reg, data);
 
-	return ret;
+	return regmap_update_bits(regmap, reg, rmask, data);
 }
 
 #define RK3568_PULL_PMU_OFFSET		0x20
@@ -225,7 +223,7 @@ static int rk3568_set_pull(struct rockchip_pin_bank *bank,
 	struct regmap *regmap;
 	int reg, ret;
 	u8 bit, type;
-	u32 data;
+	u32 data, rmask;
 
 	if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
 		return -ENOTSUPP;
@@ -249,52 +247,59 @@ static int rk3568_set_pull(struct rockchip_pin_bank *bank,
 
 	/* enable the write to the equivalent lower bits */
 	data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16);
-
+	rmask = data | (data >> 16);
 	data |= (ret << bit);
-	ret = regmap_write(regmap, reg, data);
 
-	return ret;
+	return regmap_update_bits(regmap, reg, rmask, data);
 }
 
+#define GRF_GPIO1C5_DS		0x0840
+#define GRF_GPIO2A2_DS		0x0844
+#define GRF_GPIO2B0_DS		0x0848
+#define GRF_GPIO3A0_DS		0x084c
+#define GRF_GPIO3A6_DS		0x0850
+#define GRF_GPIO4A0_DS		0x0854
+
 static int rk3568_set_drive(struct rockchip_pin_bank *bank,
 			    int pin_num, int strength)
 {
 	struct regmap *regmap;
-	int reg;
-	u32 data;
+	int reg, ret;
+	u32 data, rmask;
 	u8 bit;
 	int drv = (1 << (strength + 1)) - 1;
-	int ret = 0;
 
 	rk3568_calc_drv_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
 
 	/* enable the write to the equivalent lower bits */
 	data = ((1 << RK3568_DRV_BITS_PER_PIN) - 1) << (bit + 16);
+	rmask = data | (data >> 16);
 	data |= (drv << bit);
 
-	ret = regmap_write(regmap, reg, data);
+	ret = regmap_update_bits(regmap, reg, rmask, data);
 	if (ret)
 		return ret;
 
 	if (bank->bank_num == 1 && pin_num == 21)
-		reg = 0x0840;
+		reg = GRF_GPIO1C5_DS;
 	else if (bank->bank_num == 2 && pin_num == 2)
-		reg = 0x0844;
+		reg = GRF_GPIO2A2_DS;
 	else if (bank->bank_num == 2 && pin_num == 8)
-		reg = 0x0848;
+		reg = GRF_GPIO2B0_DS;
 	else if (bank->bank_num == 3 && pin_num == 0)
-		reg = 0x084c;
+		reg = GRF_GPIO3A0_DS;
 	else if (bank->bank_num == 3 && pin_num == 6)
-		reg = 0x0850;
+		reg = GRF_GPIO3A6_DS;
 	else if (bank->bank_num == 4 && pin_num == 0)
-		reg = 0x0854;
+		reg = GRF_GPIO4A0_DS;
 	else
 		return 0;
 
 	data = ((1 << RK3568_DRV_BITS_PER_PIN) - 1) << 16;
-	data |= drv;
+	rmask = data | (data >> 16);
+	data |= drv >> 6;
 
-	return regmap_write(regmap, reg, data);
+	return regmap_update_bits(regmap, reg, rmask, data);
 }
 
 static int rk3568_set_schmitt(struct rockchip_pin_bank *bank,
@@ -302,16 +307,17 @@ static int rk3568_set_schmitt(struct rockchip_pin_bank *bank,
 {
 	struct regmap *regmap;
 	int reg;
-	u32 data;
+	u32 data, rmask;
 	u8 bit;
 
 	rk3568_calc_schmitt_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
 
 	/* enable the write to the equivalent lower bits */
 	data = ((1 << RK3568_SCHMITT_BITS_PER_PIN) - 1) << (bit + 16);
-	data |= (enable << bit);
+	rmask = data | (data >> 16);
+	data |= ((enable ? 0x2 : 0x1) << bit);
 
-	return regmap_write(regmap, reg, data);
+	return regmap_update_bits(regmap, reg, rmask, data);
 }
 
 static struct rockchip_pin_bank rk3568_pin_banks[] = {
diff --git a/drivers/video/pwm_backlight.c b/drivers/video/pwm_backlight.c
index 46c16a8..aa0e292 100644
--- a/drivers/video/pwm_backlight.c
+++ b/drivers/video/pwm_backlight.c
@@ -14,6 +14,7 @@
 #include <pwm.h>
 #include <asm/gpio.h>
 #include <linux/delay.h>
+#include <linux/math64.h>
 #include <power/regulator.h>
 
 /**
@@ -59,12 +60,14 @@ struct pwm_backlight_priv {
 
 static int set_pwm(struct pwm_backlight_priv *priv)
 {
+	u64 width;
 	uint duty_cycle;
 	int ret;
 
 	if (priv->period_ns) {
-		duty_cycle = (u64)priv->period_ns * (priv->cur_level - priv->min_level) /
-			(priv->max_level - priv->min_level);
+		width = priv->period_ns * (priv->cur_level - priv->min_level);
+		duty_cycle = div_u64(width,
+				     (priv->max_level - priv->min_level));
 		ret = pwm_set_config(priv->pwm, priv->channel, priv->period_ns,
 				     duty_cycle);
 	} else {
diff --git a/include/configs/rv1126_common.h b/include/configs/rv1126_common.h
index 1ec1640..a64c0c6 100644
--- a/include/configs/rv1126_common.h
+++ b/include/configs/rv1126_common.h
@@ -24,6 +24,7 @@
 	"scriptaddr=0x00000000\0" \
 	"pxefile_addr_r=0x00100000\0" \
 	"fdt_addr_r=0x08300000\0" \
+	"fdtoverlay_addr_r=0x02000000\0" \
 	"kernel_addr_r=0x02008000\0" \
 	"ramdisk_addr_r=0x0a200000\0"