diff options
| author | Tom Rini <trini@konsulko.com> | 2024-03-13 18:47:16 -0400 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2024-03-13 18:47:16 -0400 |
| commit | 3987e15e88a1d6a9a211b7637728fcc0acf74fbe (patch) | |
| tree | 5259b77db728b368c4900579c2d44337ae6de9e7 | |
| parent | 213ffd49bdbd30512661eaf47b7445ef8a81bcdb (diff) | |
| parent | 969ea37dfd04e2800828fe2a26cd354d22569d18 (diff) | |
| download | u-boot-WIP/13Mar2024-next.zip u-boot-WIP/13Mar2024-next.tar.gz u-boot-WIP/13Mar2024-next.tar.bz2 | |
Merge branch '2024-04-13-assorted-fixes' into nextWIP/13Mar2024-next
- Fix bootm_low handling, CONFIG_64BIT usage fixes, RNG fixes, cli
history fixes, allow bootelf to pass a device tree address, other
assorted fixes.
98 files changed, 166 insertions, 4722 deletions
@@ -63,6 +63,7 @@ fit-dtb.blob* /spl/ /tpl/ /defconfig +/generated_defconfig # # Generated include files diff --git a/MAINTAINERS b/MAINTAINERS index b1c5a9a..8b316c8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -683,13 +683,6 @@ F: tools/stm32image.c N: stm N: stm32 - -ARM STM STV0991 -M: Vikas Manocha <vikas.manocha@st.com> -S: Maintained -F: arch/arm/cpu/armv7/stv0991/ -F: arch/arm/include/asm/arch-stv0991/ - ARM SUNXI M: Jagan Teki <jagan@amarulasolutions.com> M: Andre Przywara <andre.przywara@arm.com> @@ -2233,6 +2233,7 @@ clean: $(clean-dirs) -o -name modules.builtin -o -name '.tmp_*.o.*' \ -o -name 'dsdt_generated.aml' -o -name 'dsdt_generated.asl.tmp' \ -o -name 'dsdt_generated.c' \ + -o -name 'generated_defconfig' \ -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \ -type f -print | xargs rm -f diff --git a/arch/Kconfig b/arch/Kconfig index 0d3cce9..f9aaf37 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -20,6 +20,12 @@ config SYS_CACHE_SHIFT_6 config SYS_CACHE_SHIFT_7 bool +config 32BIT + bool + +config 64BIT + bool + config SYS_CACHELINE_SIZE int default 128 if SYS_CACHE_SHIFT_7 diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 85f0111..71c9647 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,6 +6,7 @@ config SYS_ARCH config ARM64 bool + select 64BIT select PHYS_64BIT select SYS_CACHE_SHIFT_6 imply SPL_SEPARATE_BSS @@ -631,20 +632,6 @@ config ARCH_ORION5X select SPL_SEPARATE_BSS if SPL select TIMER -config TARGET_STV0991 - bool "Support stv0991" - select CPU_V7A - select DM - select DM_SERIAL - select DM_SPI - select DM_SPI_FLASH - select GPIO_EXTRA_HEADER - select PL01X_SERIAL - select MTD - select SPI - select SPI_FLASH - imply CMD_DM - config ARCH_BCM283X bool "Broadcom BCM283X family" select DM @@ -2358,7 +2345,6 @@ source "board/samsung/common/Kconfig" source "board/siemens/common/Kconfig" source "board/seeed/npi_imx6ull/Kconfig" source "board/socionext/developerbox/Kconfig" -source "board/st/stv0991/Kconfig" source "board/tcl/sl50/Kconfig" source "board/traverse/ten64/Kconfig" source "board/variscite/dart_6ul/Kconfig" diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 653eef8..99cf9eb 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -37,7 +37,6 @@ obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/ obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/ obj-$(if $(filter bcmnsp,$(SOC)),y) += bcmnsp/ obj-$(if $(filter ls102xa,$(SOC)),y) += ls102xa/ -obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_VF610) += vf610/ obj-$(CONFIG_ARCH_S5P4418) += s5p4418/ diff --git a/arch/arm/cpu/armv7/stv0991/Makefile b/arch/arm/cpu/armv7/stv0991/Makefile deleted file mode 100644 index 3be5eba..0000000 --- a/arch/arm/cpu/armv7/stv0991/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2014, STMicroelectronics - All Rights Reserved -# Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - -obj-y := timer.o clock.o pinmux.o reset.o -obj-y += lowlevel.o diff --git a/arch/arm/cpu/armv7/stv0991/clock.c b/arch/arm/cpu/armv7/stv0991/clock.c deleted file mode 100644 index 1e35dee..0000000 --- a/arch/arm/cpu/armv7/stv0991/clock.c +++ /dev/null @@ -1,42 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2014, STMicroelectronics - All Rights Reserved - * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - */ - -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/stv0991_cgu.h> -#include<asm/arch/stv0991_periph.h> - -static struct stv0991_cgu_regs *const stv0991_cgu_regs = \ - (struct stv0991_cgu_regs *) (CGU_BASE_ADDR); - -void enable_pll1(void) -{ - /* pll1 already configured for 1000Mhz, just need to enable it */ - writel(readl(&stv0991_cgu_regs->pll1_ctrl) & ~(0x01), - &stv0991_cgu_regs->pll1_ctrl); -} - -void clock_setup(int peripheral) -{ - switch (peripheral) { - case UART_CLOCK_CFG: - writel(UART_CLK_CFG, &stv0991_cgu_regs->uart_freq); - break; - case ETH_CLOCK_CFG: - enable_pll1(); - writel(ETH_CLK_CFG, &stv0991_cgu_regs->eth_freq); - - /* Clock selection for ethernet tx_clk & rx_clk*/ - writel((readl(&stv0991_cgu_regs->eth_ctrl) & ETH_CLK_MASK) - | ETH_CLK_CTRL, &stv0991_cgu_regs->eth_ctrl); - break; - case QSPI_CLOCK_CFG: - writel(QSPI_CLK_CTRL, &stv0991_cgu_regs->qspi_freq); - break; - default: - break; - } -} diff --git a/arch/arm/cpu/armv7/stv0991/lowlevel.S b/arch/arm/cpu/armv7/stv0991/lowlevel.S deleted file mode 100644 index 5733eaa1..0000000 --- a/arch/arm/cpu/armv7/stv0991/lowlevel.S +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2014 STMicroelectronics - */ - -#include <config.h> -#include <linux/linkage.h> - -ENTRY(lowlevel_init) - mov pc, lr -ENDPROC(lowlevel_init) diff --git a/arch/arm/cpu/armv7/stv0991/pinmux.c b/arch/arm/cpu/armv7/stv0991/pinmux.c deleted file mode 100644 index 6c44ffe..0000000 --- a/arch/arm/cpu/armv7/stv0991/pinmux.c +++ /dev/null @@ -1,66 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2014, STMicroelectronics - All Rights Reserved - * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - */ - -#include <asm/io.h> -#include <asm/arch/stv0991_creg.h> -#include <asm/arch/stv0991_periph.h> -#include <asm/arch/hardware.h> - -static struct stv0991_creg *const stv0991_creg = \ - (struct stv0991_creg *)CREG_BASE_ADDR; - -int stv0991_pinmux_config(int peripheral) -{ - switch (peripheral) { - case UART_GPIOC_30_31: - /* SSDA/SSCL pad muxing to UART Rx/Dx */ - writel((readl(&stv0991_creg->mux12) & GPIOC_31_MUX_MASK) | - CFG_GPIOC_31_UART_RX, - &stv0991_creg->mux12); - writel((readl(&stv0991_creg->mux12) & GPIOC_30_MUX_MASK) | - CFG_GPIOC_30_UART_TX, - &stv0991_creg->mux12); - /* SSDA/SSCL pad config to push pull*/ - writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_31_MODE_MASK) | - CFG_GPIOC_31_MODE_PP, - &stv0991_creg->cfg_pad6); - writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_30_MODE_MASK) | - CFG_GPIOC_30_MODE_HIGH, - &stv0991_creg->cfg_pad6); - break; - case UART_GPIOB_16_17: - /* ethernet rx_6/7 to UART Rx/Dx */ - writel((readl(&stv0991_creg->mux7) & GPIOB_17_MUX_MASK) | - CFG_GPIOB_17_UART_RX, - &stv0991_creg->mux7); - writel((readl(&stv0991_creg->mux7) & GPIOB_16_MUX_MASK) | - CFG_GPIOB_16_UART_TX, - &stv0991_creg->mux7); - break; - case ETH_GPIOB_10_31_C_0_4: - writel(readl(&stv0991_creg->mux6) & 0x000000FF, - &stv0991_creg->mux6); - writel(0x00000000, &stv0991_creg->mux7); - writel(0x00000000, &stv0991_creg->mux8); - writel(readl(&stv0991_creg->mux9) & 0xFFF00000, - &stv0991_creg->mux9); - /* Ethernet Voltage configuration to 1.8V*/ - writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) | - ETH_VDD_CFG, &stv0991_creg->vdd_pad1); - writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) | - ETH_M_VDD_CFG, &stv0991_creg->vdd_pad1); - - break; - case QSPI_CS_CLK_PAD: - writel((readl(&stv0991_creg->mux13) & FLASH_CS_NC_MASK) | - CFG_FLASH_CS_NC, &stv0991_creg->mux13); - writel((readl(&stv0991_creg->mux13) & FLASH_CLK_MASK) | - CFG_FLASH_CLK, &stv0991_creg->mux13); - default: - break; - } - return 0; -} diff --git a/arch/arm/cpu/armv7/stv0991/reset.c b/arch/arm/cpu/armv7/stv0991/reset.c deleted file mode 100644 index 77d4477..0000000 --- a/arch/arm/cpu/armv7/stv0991/reset.c +++ /dev/null @@ -1,27 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2014, STMicroelectronics - All Rights Reserved - * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - */ - -#include <common.h> -#include <cpu_func.h> -#include <asm/io.h> -#include <asm/arch/stv0991_wdru.h> -#include <linux/delay.h> -void reset_cpu(void) -{ - puts("System is going to reboot ...\n"); - /* - * This 1 second delay will allow the above message - * to be printed before reset - */ - udelay((1000 * 1000)); - - /* Setting bit 1 of the WDRU unit will reset the SoC */ - writel(WDRU_RST_SYS, &stv0991_wd_ru_ptr->wdru_ctrl1); - - /* system will restart */ - while (1) - ; -} diff --git a/arch/arm/cpu/armv7/stv0991/timer.c b/arch/arm/cpu/armv7/stv0991/timer.c deleted file mode 100644 index f7cc457..0000000 --- a/arch/arm/cpu/armv7/stv0991/timer.c +++ /dev/null @@ -1,114 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2014, STMicroelectronics - All Rights Reserved - * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - */ - -#include <common.h> -#include <init.h> -#include <time.h> -#include <asm/global_data.h> -#include <asm/io.h> -#include <asm/arch-stv0991/hardware.h> -#include <asm/arch-stv0991/stv0991_cgu.h> -#include <asm/arch-stv0991/stv0991_gpt.h> -#include <linux/delay.h> - -static struct stv0991_cgu_regs *const stv0991_cgu_regs = \ - (struct stv0991_cgu_regs *) (CGU_BASE_ADDR); - -#define READ_TIMER() (readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING) -#define GPT_RESOLUTION (CFG_SYS_HZ_CLOCK / CONFIG_SYS_HZ) - -DECLARE_GLOBAL_DATA_PTR; - -#define timestamp gd->arch.tbl -#define lastdec gd->arch.lastinc - -static ulong get_timer_masked(void); - -int timer_init(void) -{ - /* Timer1 clock configuration */ - writel(TIMER1_CLK_CFG, &stv0991_cgu_regs->tim_freq); - writel(readl(&stv0991_cgu_regs->cgu_enable_2) | - TIMER1_CLK_EN, &stv0991_cgu_regs->cgu_enable_2); - - /* Stop the timer */ - writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1); - writel(GPT_PRESCALER_128, &gpt1_regs_ptr->psc); - /* Configure timer for auto-reload */ - writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD, - &gpt1_regs_ptr->cr1); - - /* load value for free running */ - writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr); - - /* start timer */ - writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN, - &gpt1_regs_ptr->cr1); - - /* Reset the timer */ - lastdec = READ_TIMER(); - timestamp = 0; - - return 0; -} - -/* - * timer without interrupts - */ -ulong get_timer(ulong base) -{ - return (get_timer_masked() / GPT_RESOLUTION) - base; -} - -void __udelay(unsigned long usec) -{ - ulong tmo; - ulong start = get_timer_masked(); - ulong tenudelcnt = CFG_SYS_HZ_CLOCK / (1000 * 100); - ulong rndoff; - - rndoff = (usec % 10) ? 1 : 0; - - /* tenudelcnt timer tick gives 10 microsecconds delay */ - tmo = ((usec / 10) + rndoff) * tenudelcnt; - - while ((ulong) (get_timer_masked() - start) < tmo) - ; -} - -static ulong get_timer_masked(void) -{ - ulong now = READ_TIMER(); - - if (now >= lastdec) { - /* normal mode */ - timestamp += now - lastdec; - } else { - /* we have an overflow ... */ - timestamp += now + GPT_FREE_RUNNING - lastdec; - } - lastdec = now; - - return timestamp; -} - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return CONFIG_SYS_HZ; -} diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a965a70..8a366e5 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -569,7 +569,6 @@ dtb-$(CONFIG_TARGET_AM57XX_EVM) += am57xx-beagle-x15.dtb \ am574x-idk.dtb \ am572x-idk.dtb \ am571x-idk.dtb -dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \ ls1021a-qds-lpuart.dtb \ @@ -1418,9 +1417,7 @@ dtb-$(CONFIG_SOC_K3_J721S2) += k3-am68-sk-base-board.dtb\ dtb-$(CONFIG_SOC_K3_J784S4) += k3-am69-r5-sk.dtb \ k3-j784s4-r5-evm.dtb -dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-evm.dtb \ - k3-am642-r5-evm.dtb \ - k3-am642-sk.dtb \ +dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-r5-evm.dtb \ k3-am642-r5-sk.dtb \ k3-am642-phyboard-electra-rdk.dtb \ k3-am642-r5-phycore-som-2gb.dtb diff --git a/arch/arm/dts/k3-am64-main.dtsi b/arch/arm/dts/k3-am64-main.dtsi deleted file mode 100644 index 0df54a7..0000000 --- a/arch/arm/dts/k3-am64-main.dtsi +++ /dev/null @@ -1,1546 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for AM642 SoC Family Main Domain peripherals - * - * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#include <dt-bindings/phy/phy-cadence.h> -#include <dt-bindings/phy/phy-ti.h> - -/ { - serdes_refclk: clock-cmnrefclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; -}; - -&cbass_main { - oc_sram: sram@70000000 { - compatible = "mmio-sram"; - reg = <0x00 0x70000000 0x00 0x200000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x00 0x70000000 0x200000>; - - tfa-sram@1c0000 { - reg = <0x1c0000 0x20000>; - }; - - dmsc-sram@1e0000 { - reg = <0x1e0000 0x1c000>; - }; - - sproxy-sram@1fc000 { - reg = <0x1fc000 0x4000>; - }; - }; - - main_conf: syscon@43000000 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x0 0x43000000 0x0 0x20000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x43000000 0x20000>; - - chipid@14 { - compatible = "ti,am654-chipid"; - reg = <0x00000014 0x4>; - }; - - serdes_ln_ctrl: mux-controller { - compatible = "mmio-mux"; - #mux-control-cells = <1>; - mux-reg-masks = <0x4080 0x3>; /* SERDES0 lane0 select */ - }; - - phy_gmii_sel: phy@4044 { - compatible = "ti,am654-phy-gmii-sel"; - reg = <0x4044 0x8>; - #phy-cells = <1>; - }; - - epwm_tbclk: clock-controller@4140 { - compatible = "ti,am64-epwm-tbclk"; - reg = <0x4130 0x4>; - #clock-cells = <1>; - }; - }; - - gic500: interrupt-controller@1800000 { - compatible = "arm,gic-v3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ - <0x00 0x01840000 0x00 0xC0000>, /* GICR */ - <0x01 0x00000000 0x00 0x2000>, /* GICC */ - <0x01 0x00010000 0x00 0x1000>, /* GICH */ - <0x01 0x00020000 0x00 0x2000>; /* GICV */ - /* - * vcpumntirq: - * virtual CPU interface maintenance interrupt - */ - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - - gic_its: msi-controller@1820000 { - compatible = "arm,gic-v3-its"; - reg = <0x00 0x01820000 0x00 0x10000>; - socionext,synquacer-pre-its = <0x1000000 0x400000>; - msi-controller; - #msi-cells = <1>; - }; - }; - - dmss: bus@48000000 { - compatible = "simple-mfd"; - #address-cells = <2>; - #size-cells = <2>; - dma-ranges; - ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>; - - ti,sci-dev-id = <25>; - - secure_proxy_main: mailbox@4d000000 { - compatible = "ti,am654-secure-proxy"; - #mbox-cells = <1>; - reg-names = "target_data", "rt", "scfg"; - reg = <0x00 0x4d000000 0x00 0x80000>, - <0x00 0x4a600000 0x00 0x80000>, - <0x00 0x4a400000 0x00 0x80000>; - interrupt-names = "rx_012"; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - }; - - inta_main_dmss: interrupt-controller@48000000 { - compatible = "ti,sci-inta"; - reg = <0x00 0x48000000 0x00 0x100000>; - #interrupt-cells = <0>; - interrupt-controller; - interrupt-parent = <&gic500>; - msi-controller; - ti,sci = <&dmsc>; - ti,sci-dev-id = <28>; - ti,interrupt-ranges = <4 68 36>; - ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>; - }; - - main_bcdma: dma-controller@485c0100 { - compatible = "ti,am64-dmss-bcdma"; - reg = <0x00 0x485c0100 0x00 0x100>, - <0x00 0x4c000000 0x00 0x20000>, - <0x00 0x4a820000 0x00 0x20000>, - <0x00 0x4aa40000 0x00 0x20000>, - <0x00 0x4bc00000 0x00 0x100000>; - reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; - msi-parent = <&inta_main_dmss>; - #dma-cells = <3>; - - ti,sci = <&dmsc>; - ti,sci-dev-id = <26>; - ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */ - ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */ - ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */ - }; - - main_pktdma: dma-controller@485c0000 { - compatible = "ti,am64-dmss-pktdma"; - reg = <0x00 0x485c0000 0x00 0x100>, - <0x00 0x4a800000 0x00 0x20000>, - <0x00 0x4aa00000 0x00 0x40000>, - <0x00 0x4b800000 0x00 0x400000>; - reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; - msi-parent = <&inta_main_dmss>; - #dma-cells = <2>; - - ti,sci = <&dmsc>; - ti,sci-dev-id = <30>; - ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */ - <0x24>, /* CPSW_TX_CHAN */ - <0x25>, /* SAUL_TX_0_CHAN */ - <0x26>, /* SAUL_TX_1_CHAN */ - <0x27>, /* ICSSG_0_TX_CHAN */ - <0x28>; /* ICSSG_1_TX_CHAN */ - ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */ - <0x11>, /* RING_CPSW_TX_CHAN */ - <0x12>, /* RING_SAUL_TX_0_CHAN */ - <0x13>, /* RING_SAUL_TX_1_CHAN */ - <0x14>, /* RING_ICSSG_0_TX_CHAN */ - <0x15>; /* RING_ICSSG_1_TX_CHAN */ - ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */ - <0x2b>, /* CPSW_RX_CHAN */ - <0x2d>, /* SAUL_RX_0_CHAN */ - <0x2f>, /* SAUL_RX_1_CHAN */ - <0x31>, /* SAUL_RX_2_CHAN */ - <0x33>, /* SAUL_RX_3_CHAN */ - <0x35>, /* ICSSG_0_RX_CHAN */ - <0x37>; /* ICSSG_1_RX_CHAN */ - ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */ - <0x2c>, /* FLOW_CPSW_RX_CHAN */ - <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */ - <0x32>, /* FLOW_SAUL_RX_2/3_CHAN */ - <0x36>, /* FLOW_ICSSG_0_RX_CHAN */ - <0x38>; /* FLOW_ICSSG_1_RX_CHAN */ - }; - }; - - dmsc: system-controller@44043000 { - compatible = "ti,k2g-sci"; - ti,host-id = <12>; - mbox-names = "rx", "tx"; - mboxes = <&secure_proxy_main 12>, - <&secure_proxy_main 13>; - reg-names = "debug_messages"; - reg = <0x00 0x44043000 0x00 0xfe0>; - - k3_pds: power-controller { - compatible = "ti,sci-pm-domain"; - #power-domain-cells = <2>; - }; - - k3_clks: clock-controller { - compatible = "ti,k2g-sci-clk"; - #clock-cells = <2>; - }; - - k3_reset: reset-controller { - compatible = "ti,sci-reset"; - #reset-cells = <2>; - }; - }; - - main_pmx0: pinctrl@f4000 { - compatible = "pinctrl-single"; - reg = <0x00 0xf4000 0x00 0x2d0>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0xffffffff>; - }; - - main_timer0: timer@2400000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2400000 0x00 0x400>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 36 1>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 36 1>; - assigned-clock-parents = <&k3_clks 36 2>; - power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer1: timer@2410000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2410000 0x00 0x400>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 37 1>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 37 1>; - assigned-clock-parents = <&k3_clks 37 2>; - power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer2: timer@2420000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2420000 0x00 0x400>; - interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 38 1>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 38 1>; - assigned-clock-parents = <&k3_clks 38 2>; - power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer3: timer@2430000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2430000 0x00 0x400>; - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 39 1>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 39 1>; - assigned-clock-parents = <&k3_clks 39 2>; - power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer4: timer@2440000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2440000 0x00 0x400>; - interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 40 1>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 40 1>; - assigned-clock-parents = <&k3_clks 40 2>; - power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer5: timer@2450000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2450000 0x00 0x400>; - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 41 1>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 41 1>; - assigned-clock-parents = <&k3_clks 41 2>; - power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer6: timer@2460000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2460000 0x00 0x400>; - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 42 1>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 42 1>; - assigned-clock-parents = <&k3_clks 42 2>; - power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer7: timer@2470000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2470000 0x00 0x400>; - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 43 1>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 43 1>; - assigned-clock-parents = <&k3_clks 43 2>; - power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer8: timer@2480000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2480000 0x00 0x400>; - interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 44 1>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 44 1>; - assigned-clock-parents = <&k3_clks 44 2>; - power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer9: timer@2490000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2490000 0x00 0x400>; - interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 45 1>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 45 1>; - assigned-clock-parents = <&k3_clks 45 2>; - power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer10: timer@24a0000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x24a0000 0x00 0x400>; - interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 46 1>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 46 1>; - assigned-clock-parents = <&k3_clks 46 2>; - power-domains = <&k3_pds 46 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer11: timer@24b0000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x24b0000 0x00 0x400>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 47 1>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 47 1>; - assigned-clock-parents = <&k3_clks 47 2>; - power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_esm: esm@420000 { - compatible = "ti,j721e-esm"; - reg = <0x00 0x420000 0x00 0x1000>; - ti,esm-pins = <160>, <161>; - }; - - main_uart0: serial@2800000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02800000 0x00 0x100>; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <48000000>; - power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 146 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart1: serial@2810000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02810000 0x00 0x100>; - interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <48000000>; - power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 152 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart2: serial@2820000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02820000 0x00 0x100>; - interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <48000000>; - power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 153 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart3: serial@2830000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02830000 0x00 0x100>; - interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <48000000>; - power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 154 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart4: serial@2840000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02840000 0x00 0x100>; - interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <48000000>; - power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 155 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart5: serial@2850000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02850000 0x00 0x100>; - interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <48000000>; - power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 156 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart6: serial@2860000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02860000 0x00 0x100>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <48000000>; - power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 158 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_i2c0: i2c@20000000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x20000000 0x00 0x100>; - interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 102 2>; - clock-names = "fck"; - status = "disabled"; - }; - - main_i2c1: i2c@20010000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x20010000 0x00 0x100>; - interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 103 2>; - clock-names = "fck"; - status = "disabled"; - }; - - main_i2c2: i2c@20020000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x20020000 0x00 0x100>; - interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 104 2>; - clock-names = "fck"; - status = "disabled"; - }; - - main_i2c3: i2c@20030000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x20030000 0x00 0x100>; - interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 105 2>; - clock-names = "fck"; - status = "disabled"; - }; - - main_spi0: spi@20100000 { - compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; - reg = <0x00 0x20100000 0x00 0x400>; - interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 141 0>; - dmas = <&main_pktdma 0xc300 0>, <&main_pktdma 0x4300 0>; - dma-names = "tx0", "rx0"; - status = "disabled"; - }; - - main_spi1: spi@20110000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x00 0x20110000 0x00 0x400>; - interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 142 0>; - status = "disabled"; - }; - - main_spi2: spi@20120000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x00 0x20120000 0x00 0x400>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 143 0>; - status = "disabled"; - }; - - main_spi3: spi@20130000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x00 0x20130000 0x00 0x400>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 144 0>; - status = "disabled"; - }; - - main_spi4: spi@20140000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x00 0x20140000 0x00 0x400>; - interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 145 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 145 0>; - status = "disabled"; - }; - - main_gpio_intr: interrupt-controller@a00000 { - compatible = "ti,sci-intr"; - reg = <0x00 0x00a00000 0x00 0x800>; - ti,intr-trigger-type = <1>; - interrupt-controller; - interrupt-parent = <&gic500>; - #interrupt-cells = <1>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <3>; - ti,interrupt-ranges = <0 32 16>; - }; - - main_gpio0: gpio@600000 { - compatible = "ti,am64-gpio", "ti,keystone-gpio"; - reg = <0x0 0x00600000 0x0 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&main_gpio_intr>; - interrupts = <190>, <191>, <192>, - <193>, <194>, <195>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <87>; - ti,davinci-gpio-unbanked = <0>; - power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 77 0>; - clock-names = "gpio"; - }; - - main_gpio1: gpio@601000 { - compatible = "ti,am64-gpio", "ti,keystone-gpio"; - reg = <0x0 0x00601000 0x0 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&main_gpio_intr>; - interrupts = <180>, <181>, <182>, - <183>, <184>, <185>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <88>; - ti,davinci-gpio-unbanked = <0>; - power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 78 0>; - clock-names = "gpio"; - }; - - sdhci0: mmc@fa10000 { - compatible = "ti,am64-sdhci-8bit"; - reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>; - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 57 0>, <&k3_clks 57 1>; - clock-names = "clk_ahb", "clk_xin"; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - ti,trm-icp = <0x2>; - ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-mmc-hs = <0x0>; - ti,otap-del-sel-ddr52 = <0x6>; - ti,otap-del-sel-hs200 = <0x7>; - }; - - sdhci1: mmc@fa00000 { - compatible = "ti,am64-sdhci-4bit"; - reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>; - interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 58 3>, <&k3_clks 58 4>; - clock-names = "clk_ahb", "clk_xin"; - ti,trm-icp = <0x2>; - ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-sd-hs = <0xf>; - ti,otap-del-sel-sdr12 = <0xf>; - ti,otap-del-sel-sdr25 = <0xf>; - ti,otap-del-sel-sdr50 = <0xc>; - ti,otap-del-sel-sdr104 = <0x6>; - ti,otap-del-sel-ddr50 = <0x9>; - ti,clkbuf-sel = <0x7>; - }; - - cpsw3g: ethernet@8000000 { - compatible = "ti,am642-cpsw-nuss"; - #address-cells = <2>; - #size-cells = <2>; - reg = <0x0 0x8000000 0x0 0x200000>; - reg-names = "cpsw_nuss"; - ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>; - clocks = <&k3_clks 13 0>; - assigned-clocks = <&k3_clks 13 1>; - assigned-clock-parents = <&k3_clks 13 9>; - clock-names = "fck"; - power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>; - - dmas = <&main_pktdma 0xC500 15>, - <&main_pktdma 0xC501 15>, - <&main_pktdma 0xC502 15>, - <&main_pktdma 0xC503 15>, - <&main_pktdma 0xC504 15>, - <&main_pktdma 0xC505 15>, - <&main_pktdma 0xC506 15>, - <&main_pktdma 0xC507 15>, - <&main_pktdma 0x4500 15>; - dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", - "tx7", "rx"; - - ethernet-ports { - #address-cells = <1>; - #size-cells = <0>; - - cpsw_port1: port@1 { - reg = <1>; - ti,mac-only; - label = "port1"; - phys = <&phy_gmii_sel 1>; - mac-address = [00 00 00 00 00 00]; - ti,syscon-efuse = <&main_conf 0x200>; - }; - - cpsw_port2: port@2 { - reg = <2>; - ti,mac-only; - label = "port2"; - phys = <&phy_gmii_sel 2>; - mac-address = [00 00 00 00 00 00]; - }; - }; - - cpsw3g_mdio: mdio@f00 { - compatible = "ti,cpsw-mdio","ti,davinci_mdio"; - reg = <0x0 0xf00 0x0 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&k3_clks 13 0>; - clock-names = "fck"; - bus_freq = <1000000>; - status = "disabled"; - }; - - cpts@3d000 { - compatible = "ti,j721e-cpts"; - reg = <0x0 0x3d000 0x0 0x400>; - clocks = <&k3_clks 13 1>; - clock-names = "cpts"; - interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cpts"; - ti,cpts-ext-ts-inputs = <4>; - ti,cpts-periodic-outputs = <2>; - }; - }; - - main_cpts0: cpts@39000000 { - compatible = "ti,j721e-cpts"; - reg = <0x0 0x39000000 0x0 0x400>; - reg-names = "cpts"; - power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 84 0>; - clock-names = "cpts"; - assigned-clocks = <&k3_clks 84 0>; - assigned-clock-parents = <&k3_clks 84 8>; - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cpts"; - ti,cpts-periodic-outputs = <6>; - ti,cpts-ext-ts-inputs = <8>; - }; - - timesync_router: pinctrl@a40000 { - compatible = "pinctrl-single"; - reg = <0x0 0xa40000 0x0 0x800>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x000107ff>; - }; - - usbss0: cdns-usb@f900000 { - compatible = "ti,am64-usb"; - reg = <0x00 0xf900000 0x00 0x100>; - power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 161 9>, <&k3_clks 161 1>; - clock-names = "ref", "lpm"; - assigned-clocks = <&k3_clks 161 9>; /* USB2_REFCLK */ - assigned-clock-parents = <&k3_clks 161 10>; /* HF0SC0 */ - #address-cells = <2>; - #size-cells = <2>; - ranges; - usb0: usb@f400000 { - compatible = "cdns,usb3"; - reg = <0x00 0xf400000 0x00 0x10000>, - <0x00 0xf410000 0x00 0x10000>, - <0x00 0xf420000 0x00 0x10000>; - reg-names = "otg", - "xhci", - "dev"; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ - <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ - <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; /* otgirq */ - interrupt-names = "host", - "peripheral", - "otg"; - maximum-speed = "super-speed"; - dr_mode = "otg"; - }; - }; - - tscadc0: tscadc@28001000 { - compatible = "ti,am654-tscadc", "ti,am3359-tscadc"; - reg = <0x00 0x28001000 0x00 0x1000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 0 0>; - assigned-clocks = <&k3_clks 0 0>; - assigned-clock-parents = <&k3_clks 0 3>; - assigned-clock-rates = <60000000>; - clock-names = "fck"; - status = "disabled"; - - adc { - #io-channel-cells = <1>; - compatible = "ti,am654-adc", "ti,am3359-adc"; - }; - }; - - fss: bus@fc00000 { - compatible = "simple-bus"; - reg = <0x00 0x0fc00000 0x00 0x70000>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - ospi0: spi@fc40000 { - compatible = "ti,am654-ospi", "cdns,qspi-nor"; - reg = <0x00 0x0fc40000 0x00 0x100>, - <0x05 0x00000000 0x01 0x00000000>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; - cdns,fifo-depth = <256>; - cdns,fifo-width = <4>; - cdns,trigger-address = <0x0>; - #address-cells = <0x1>; - #size-cells = <0x0>; - clocks = <&k3_clks 75 6>; - assigned-clocks = <&k3_clks 75 6>; - assigned-clock-parents = <&k3_clks 75 7>; - assigned-clock-rates = <166666666>; - power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - }; - - hwspinlock: spinlock@2a000000 { - compatible = "ti,am64-hwspinlock"; - reg = <0x00 0x2a000000 0x00 0x1000>; - #hwlock-cells = <1>; - }; - - mailbox0_cluster2: mailbox@29020000 { - compatible = "ti,am64-mailbox"; - reg = <0x00 0x29020000 0x00 0x200>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - status = "disabled"; - }; - - mailbox0_cluster3: mailbox@29030000 { - compatible = "ti,am64-mailbox"; - reg = <0x00 0x29030000 0x00 0x200>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - status = "disabled"; - }; - - mailbox0_cluster4: mailbox@29040000 { - compatible = "ti,am64-mailbox"; - reg = <0x00 0x29040000 0x00 0x200>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - status = "disabled"; - }; - - mailbox0_cluster5: mailbox@29050000 { - compatible = "ti,am64-mailbox"; - reg = <0x00 0x29050000 0x00 0x200>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - status = "disabled"; - }; - - mailbox0_cluster6: mailbox@29060000 { - compatible = "ti,am64-mailbox"; - reg = <0x00 0x29060000 0x00 0x200>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - status = "disabled"; - }; - - mailbox0_cluster7: mailbox@29070000 { - compatible = "ti,am64-mailbox"; - reg = <0x00 0x29070000 0x00 0x200>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - status = "disabled"; - }; - - main_r5fss0: r5fss@78000000 { - compatible = "ti,am64-r5fss"; - ti,cluster-mode = <0>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x78000000 0x00 0x78000000 0x10000>, - <0x78100000 0x00 0x78100000 0x10000>, - <0x78200000 0x00 0x78200000 0x08000>, - <0x78300000 0x00 0x78300000 0x08000>; - power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>; - - main_r5fss0_core0: r5f@78000000 { - compatible = "ti,am64-r5f"; - reg = <0x78000000 0x00010000>, - <0x78100000 0x00010000>; - reg-names = "atcm", "btcm"; - ti,sci = <&dmsc>; - ti,sci-dev-id = <121>; - ti,sci-proc-ids = <0x01 0xff>; - resets = <&k3_reset 121 1>; - firmware-name = "am64-main-r5f0_0-fw"; - ti,atcm-enable = <1>; - ti,btcm-enable = <1>; - ti,loczrama = <1>; - }; - - main_r5fss0_core1: r5f@78200000 { - compatible = "ti,am64-r5f"; - reg = <0x78200000 0x00008000>, - <0x78300000 0x00008000>; - reg-names = "atcm", "btcm"; - ti,sci = <&dmsc>; - ti,sci-dev-id = <122>; - ti,sci-proc-ids = <0x02 0xff>; - resets = <&k3_reset 122 1>; - firmware-name = "am64-main-r5f0_1-fw"; - ti,atcm-enable = <1>; - ti,btcm-enable = <1>; - ti,loczrama = <1>; - }; - }; - - main_r5fss1: r5fss@78400000 { - compatible = "ti,am64-r5fss"; - ti,cluster-mode = <0>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x78400000 0x00 0x78400000 0x10000>, - <0x78500000 0x00 0x78500000 0x10000>, - <0x78600000 0x00 0x78600000 0x08000>, - <0x78700000 0x00 0x78700000 0x08000>; - power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; - - main_r5fss1_core0: r5f@78400000 { - compatible = "ti,am64-r5f"; - reg = <0x78400000 0x00010000>, - <0x78500000 0x00010000>; - reg-names = "atcm", "btcm"; - ti,sci = <&dmsc>; - ti,sci-dev-id = <123>; - ti,sci-proc-ids = <0x06 0xff>; - resets = <&k3_reset 123 1>; - firmware-name = "am64-main-r5f1_0-fw"; - ti,atcm-enable = <1>; - ti,btcm-enable = <1>; - ti,loczrama = <1>; - }; - - main_r5fss1_core1: r5f@78600000 { - compatible = "ti,am64-r5f"; - reg = <0x78600000 0x00008000>, - <0x78700000 0x00008000>; - reg-names = "atcm", "btcm"; - ti,sci = <&dmsc>; - ti,sci-dev-id = <124>; - ti,sci-proc-ids = <0x07 0xff>; - resets = <&k3_reset 124 1>; - firmware-name = "am64-main-r5f1_1-fw"; - ti,atcm-enable = <1>; - ti,btcm-enable = <1>; - ti,loczrama = <1>; - }; - }; - - serdes_wiz0: wiz@f000000 { - compatible = "ti,am64-wiz-10g"; - #address-cells = <1>; - #size-cells = <1>; - power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 162 0>, <&k3_clks 162 1>, <&serdes_refclk>; - clock-names = "fck", "core_ref_clk", "ext_ref_clk"; - num-lanes = <1>; - #reset-cells = <1>; - #clock-cells = <1>; - ranges = <0x0f000000 0x0 0x0f000000 0x00010000>; - - assigned-clocks = <&k3_clks 162 1>; - assigned-clock-parents = <&k3_clks 162 5>; - - serdes0: serdes@f000000 { - compatible = "ti,j721e-serdes-10g"; - reg = <0x0f000000 0x00010000>; - reg-names = "torrent_phy"; - resets = <&serdes_wiz0 0>; - reset-names = "torrent_reset"; - clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, - <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>; - clock-names = "refclk", "phy_en_refclk"; - assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, - <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>, - <&serdes_wiz0 TI_WIZ_REFCLK_DIG>; - assigned-clock-parents = <&k3_clks 162 1>, - <&k3_clks 162 1>, - <&k3_clks 162 1>; - #address-cells = <1>; - #size-cells = <0>; - #clock-cells = <1>; - }; - }; - - pcie0_rc: pcie@f102000 { - compatible = "ti,am64-pcie-host", "ti,j721e-pcie-host"; - reg = <0x00 0x0f102000 0x00 0x1000>, - <0x00 0x0f100000 0x00 0x400>, - <0x00 0x0d000000 0x00 0x00800000>, - <0x00 0x68000000 0x00 0x00001000>; - reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; - interrupt-names = "link_state"; - interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; - device_type = "pci"; - ti,syscon-pcie-ctrl = <&main_conf 0x4070>; - max-link-speed = <2>; - num-lanes = <1>; - power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 114 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>; - clock-names = "fck", "pcie_refclk"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x0 0xff>; - cdns,no-bar-match-nbits = <64>; - vendor-id = <0x104c>; - device-id = <0xb010>; - msi-map = <0x0 &gic_its 0x0 0x10000>; - ranges = <0x01000000 0x00 0x68001000 0x00 0x68001000 0x00 0x0010000>, - <0x02000000 0x00 0x68011000 0x00 0x68011000 0x00 0x7fef000>; - dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x00000010 0x0>; - status = "disabled"; - }; - - pcie0_ep: pcie-ep@f102000 { - compatible = "ti,am64-pcie-ep", "ti,j721e-pcie-ep"; - reg = <0x00 0x0f102000 0x00 0x1000>, - <0x00 0x0f100000 0x00 0x400>, - <0x00 0x0d000000 0x00 0x00800000>, - <0x00 0x68000000 0x00 0x08000000>; - reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - interrupt-names = "link_state"; - interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&main_conf 0x4070>; - max-link-speed = <2>; - num-lanes = <1>; - power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 114 0>; - clock-names = "fck"; - max-functions = /bits/ 8 <1>; - status = "disabled"; - }; - - epwm0: pwm@23000000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x23000000 0x0 0x100>; - power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - epwm1: pwm@23010000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x23010000 0x0 0x100>; - power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - epwm2: pwm@23020000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x23020000 0x0 0x100>; - power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - epwm3: pwm@23030000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x23030000 0x0 0x100>; - power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 3>, <&k3_clks 89 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - epwm4: pwm@23040000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x23040000 0x0 0x100>; - power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 4>, <&k3_clks 90 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - epwm5: pwm@23050000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x23050000 0x0 0x100>; - power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 5>, <&k3_clks 91 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - epwm6: pwm@23060000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x23060000 0x0 0x100>; - power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 6>, <&k3_clks 92 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - epwm7: pwm@23070000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x23070000 0x0 0x100>; - power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 7>, <&k3_clks 93 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - epwm8: pwm@23080000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x23080000 0x0 0x100>; - power-domains = <&k3_pds 94 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 8>, <&k3_clks 94 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - ecap0: pwm@23100000 { - compatible = "ti,am64-ecap", "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x0 0x23100000 0x0 0x60>; - power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 51 0>; - clock-names = "fck"; - status = "disabled"; - }; - - ecap1: pwm@23110000 { - compatible = "ti,am64-ecap", "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x0 0x23110000 0x0 0x60>; - power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 52 0>; - clock-names = "fck"; - status = "disabled"; - }; - - ecap2: pwm@23120000 { - compatible = "ti,am64-ecap", "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x0 0x23120000 0x0 0x60>; - power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 53 0>; - clock-names = "fck"; - status = "disabled"; - }; - - main_rti0: watchdog@e000000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0xe000000 0x00 0x100>; - clocks = <&k3_clks 125 0>; - power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 125 0>; - assigned-clock-parents = <&k3_clks 125 2>; - }; - - main_rti1: watchdog@e010000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0xe010000 0x00 0x100>; - clocks = <&k3_clks 126 0>; - power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 126 0>; - assigned-clock-parents = <&k3_clks 126 2>; - }; - - icssg0: icssg@30000000 { - compatible = "ti,am642-icssg"; - reg = <0x00 0x30000000 0x00 0x80000>; - power-domains = <&k3_pds 81 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x00 0x30000000 0x80000>; - - icssg0_mem: memories@0 { - reg = <0x0 0x2000>, - <0x2000 0x2000>, - <0x10000 0x10000>; - reg-names = "dram0", "dram1", "shrdram2"; - }; - - icssg0_cfg: cfg@26000 { - compatible = "ti,pruss-cfg", "syscon"; - reg = <0x26000 0x200>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x26000 0x2000>; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - icssg0_coreclk_mux: coreclk-mux@3c { - reg = <0x3c>; - #clock-cells = <0>; - clocks = <&k3_clks 81 0>, /* icssg0_core_clk */ - <&k3_clks 81 20>; /* icssg0_iclk */ - assigned-clocks = <&icssg0_coreclk_mux>; - assigned-clock-parents = <&k3_clks 81 20>; - }; - - icssg0_iepclk_mux: iepclk-mux@30 { - reg = <0x30>; - #clock-cells = <0>; - clocks = <&k3_clks 81 3>, /* icssg0_iep_clk */ - <&icssg0_coreclk_mux>; /* icssg0_coreclk_mux */ - assigned-clocks = <&icssg0_iepclk_mux>; - assigned-clock-parents = <&icssg0_coreclk_mux>; - }; - }; - }; - - icssg0_mii_rt: mii-rt@32000 { - compatible = "ti,pruss-mii", "syscon"; - reg = <0x32000 0x100>; - }; - - icssg0_mii_g_rt: mii-g-rt@33000 { - compatible = "ti,pruss-mii-g", "syscon"; - reg = <0x33000 0x1000>; - }; - - icssg0_intc: interrupt-controller@20000 { - compatible = "ti,icssg-intc"; - reg = <0x20000 0x2000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host_intr0", "host_intr1", - "host_intr2", "host_intr3", - "host_intr4", "host_intr5", - "host_intr6", "host_intr7"; - }; - - pru0_0: pru@34000 { - compatible = "ti,am642-pru"; - reg = <0x34000 0x3000>, - <0x22000 0x100>, - <0x22400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am64x-pru0_0-fw"; - }; - - rtu0_0: rtu@4000 { - compatible = "ti,am642-rtu"; - reg = <0x4000 0x2000>, - <0x23000 0x100>, - <0x23400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am64x-rtu0_0-fw"; - }; - - tx_pru0_0: txpru@a000 { - compatible = "ti,am642-tx-pru"; - reg = <0xa000 0x1800>, - <0x25000 0x100>, - <0x25400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am64x-txpru0_0-fw"; - }; - - pru0_1: pru@38000 { - compatible = "ti,am642-pru"; - reg = <0x38000 0x3000>, - <0x24000 0x100>, - <0x24400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am64x-pru0_1-fw"; - }; - - rtu0_1: rtu@6000 { - compatible = "ti,am642-rtu"; - reg = <0x6000 0x2000>, - <0x23800 0x100>, - <0x23c00 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am64x-rtu0_1-fw"; - }; - - tx_pru0_1: txpru@c000 { - compatible = "ti,am642-tx-pru"; - reg = <0xc000 0x1800>, - <0x25800 0x100>, - <0x25c00 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am64x-txpru0_1-fw"; - }; - - icssg0_mdio: mdio@32400 { - compatible = "ti,davinci_mdio"; - reg = <0x32400 0x100>; - clocks = <&k3_clks 62 3>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <0>; - bus_freq = <1000000>; - status = "disabled"; - }; - }; - - icssg1: icssg@30080000 { - compatible = "ti,am642-icssg"; - reg = <0x00 0x30080000 0x00 0x80000>; - power-domains = <&k3_pds 82 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x00 0x30080000 0x80000>; - - icssg1_mem: memories@0 { - reg = <0x0 0x2000>, - <0x2000 0x2000>, - <0x10000 0x10000>; - reg-names = "dram0", "dram1", "shrdram2"; - }; - - icssg1_cfg: cfg@26000 { - compatible = "ti,pruss-cfg", "syscon"; - reg = <0x26000 0x200>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x26000 0x2000>; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - icssg1_coreclk_mux: coreclk-mux@3c { - reg = <0x3c>; - #clock-cells = <0>; - clocks = <&k3_clks 82 0>, /* icssg1_core_clk */ - <&k3_clks 82 20>; /* icssg1_iclk */ - assigned-clocks = <&icssg1_coreclk_mux>; - assigned-clock-parents = <&k3_clks 82 20>; - }; - - icssg1_iepclk_mux: iepclk-mux@30 { - reg = <0x30>; - #clock-cells = <0>; - clocks = <&k3_clks 82 3>, /* icssg1_iep_clk */ - <&icssg1_coreclk_mux>; /* icssg1_coreclk_mux */ - assigned-clocks = <&icssg1_iepclk_mux>; - assigned-clock-parents = <&icssg1_coreclk_mux>; - }; - }; - }; - - icssg1_mii_rt: mii-rt@32000 { - compatible = "ti,pruss-mii", "syscon"; - reg = <0x32000 0x100>; - }; - - icssg1_mii_g_rt: mii-g-rt@33000 { - compatible = "ti,pruss-mii-g", "syscon"; - reg = <0x33000 0x1000>; - }; - - icssg1_intc: interrupt-controller@20000 { - compatible = "ti,icssg-intc"; - reg = <0x20000 0x2000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host_intr0", "host_intr1", - "host_intr2", "host_intr3", - "host_intr4", "host_intr5", - "host_intr6", "host_intr7"; - }; - - pru1_0: pru@34000 { - compatible = "ti,am642-pru"; - reg = <0x34000 0x4000>, - <0x22000 0x100>, - <0x22400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am64x-pru1_0-fw"; - }; - - rtu1_0: rtu@4000 { - compatible = "ti,am642-rtu"; - reg = <0x4000 0x2000>, - <0x23000 0x100>, - <0x23400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am64x-rtu1_0-fw"; - }; - - tx_pru1_0: txpru@a000 { - compatible = "ti,am642-tx-pru"; - reg = <0xa000 0x1800>, - <0x25000 0x100>, - <0x25400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am64x-txpru1_0-fw"; - }; - - pru1_1: pru@38000 { - compatible = "ti,am642-pru"; - reg = <0x38000 0x4000>, - <0x24000 0x100>, - <0x24400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am64x-pru1_1-fw"; - }; - - rtu1_1: rtu@6000 { - compatible = "ti,am642-rtu"; - reg = <0x6000 0x2000>, - <0x23800 0x100>, - <0x23c00 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am64x-rtu1_1-fw"; - }; - - tx_pru1_1: txpru@c000 { - compatible = "ti,am642-tx-pru"; - reg = <0xc000 0x1800>, - <0x25800 0x100>, - <0x25c00 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am64x-txpru1_1-fw"; - }; - - icssg1_mdio: mdio@32400 { - compatible = "ti,davinci_mdio"; - reg = <0x32400 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&k3_clks 82 0>; - clock-names = "fck"; - bus_freq = <1000000>; - status = "disabled"; - }; - }; - - main_mcan0: can@20701000 { - compatible = "bosch,m_can"; - reg = <0x00 0x20701000 0x00 0x200>, - <0x00 0x20708000 0x00 0x8000>; - reg-names = "m_can", "message_ram"; - power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 98 5>, <&k3_clks 98 0>; - clock-names = "hclk", "cclk"; - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; - status = "disabled"; - }; - - main_mcan1: can@20711000 { - compatible = "bosch,m_can"; - reg = <0x00 0x20711000 0x00 0x200>, - <0x00 0x20718000 0x00 0x8000>; - reg-names = "m_can", "message_ram"; - power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 99 5>, <&k3_clks 99 0>; - clock-names = "hclk", "cclk"; - interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; - status = "disabled"; - }; - - crypto: crypto@40900000 { - compatible = "ti,am64-sa2ul"; - reg = <0x00 0x40900000 0x00 0x1200>; - power-domains = <&k3_pds 133 TI_SCI_PD_SHARED>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>; - dmas = <&main_pktdma 0xc001 0>, <&main_pktdma 0x4002 0>, - <&main_pktdma 0x4003 0>; - dma-names = "tx", "rx1", "rx2"; - - rng: rng@40910000 { - compatible = "inside-secure,safexcel-eip76"; - reg = <0x00 0x40910000 0x00 0x7d>; - interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; /* Used by OP-TEE */ - }; - }; - - gpmc0: memory-controller@3b000000 { - compatible = "ti,am64-gpmc"; - power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 80 0>; - clock-names = "fck"; - reg = <0x00 0x3b000000 0x00 0x400>, - <0x00 0x50000000 0x00 0x8000000>; - reg-names = "cfg", "data"; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - gpmc,num-cs = <3>; - gpmc,num-waitpins = <2>; - #address-cells = <2>; - #size-cells = <1>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - status = "disabled"; - }; - - elm0: ecc@25010000 { - compatible = "ti,am64-elm"; - reg = <0x00 0x25010000 0x00 0x2000>; - interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 54 0>; - clock-names = "fck"; - status = "disabled"; - }; - - main_vtm0: temperature-sensor@b00000 { - compatible = "ti,j7200-vtm"; - reg = <0x00 0xb00000 0x00 0x400>, - <0x00 0xb01000 0x00 0x400>; - power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>; - #thermal-sensor-cells = <1>; - }; -}; diff --git a/arch/arm/dts/k3-am64-mcu.dtsi b/arch/arm/dts/k3-am64-mcu.dtsi deleted file mode 100644 index 686d497..0000000 --- a/arch/arm/dts/k3-am64-mcu.dtsi +++ /dev/null @@ -1,161 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for AM64 SoC Family MCU Domain peripherals - * - * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ - */ - -&cbass_mcu { - /* - * The MCU domain timer interrupts are routed only to the ESM module, - * and not currently available for Linux. The MCU domain timers are - * of limited use without interrupts, and likely reserved by the ESM. - */ - mcu_timer0: timer@4800000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x4800000 0x00 0x400>; - clocks = <&k3_clks 35 1>; - clock-names = "fck"; - power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - status = "reserved"; - }; - - mcu_timer1: timer@4810000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x4810000 0x00 0x400>; - clocks = <&k3_clks 48 1>; - clock-names = "fck"; - power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - status = "reserved"; - }; - - mcu_timer2: timer@4820000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x4820000 0x00 0x400>; - clocks = <&k3_clks 49 1>; - clock-names = "fck"; - power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - status = "reserved"; - }; - - mcu_timer3: timer@4830000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x4830000 0x00 0x400>; - clocks = <&k3_clks 50 1>; - clock-names = "fck"; - power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - status = "reserved"; - }; - - mcu_uart0: serial@4a00000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x04a00000 0x00 0x100>; - interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 149 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - mcu_uart1: serial@4a10000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x04a10000 0x00 0x100>; - interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 160 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - mcu_i2c0: i2c@4900000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x04900000 0x00 0x100>; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 106 2>; - clock-names = "fck"; - status = "disabled"; - }; - - mcu_i2c1: i2c@4910000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x04910000 0x00 0x100>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 107 2>; - clock-names = "fck"; - status = "disabled"; - }; - - mcu_spi0: spi@4b00000 { - compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; - reg = <0x00 0x04b00000 0x00 0x400>; - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 147 0>; - status = "disabled"; - }; - - mcu_spi1: spi@4b10000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x00 0x04b10000 0x00 0x400>; - interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 148 0>; - status = "disabled"; - }; - - mcu_gpio_intr: interrupt-controller@4210000 { - compatible = "ti,sci-intr"; - reg = <0x00 0x04210000 0x00 0x200>; - ti,intr-trigger-type = <1>; - interrupt-controller; - interrupt-parent = <&gic500>; - #interrupt-cells = <1>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <5>; - ti,interrupt-ranges = <0 104 4>; - }; - - mcu_gpio0: gpio@4201000 { - compatible = "ti,am64-gpio", "ti,keystone-gpio"; - reg = <0x0 0x4201000 0x0 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&mcu_gpio_intr>; - interrupts = <30>, <31>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <23>; - ti,davinci-gpio-unbanked = <0>; - power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 79 0>; - clock-names = "gpio"; - }; - - mcu_pmx0: pinctrl@4084000 { - compatible = "pinctrl-single"; - reg = <0x00 0x4084000 0x00 0x84>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0xffffffff>; - }; - - mcu_esm: esm@4100000 { - compatible = "ti,j721e-esm"; - reg = <0x00 0x4100000 0x00 0x1000>; - ti,esm-pins = <0>, <1>; - }; -}; diff --git a/arch/arm/dts/k3-am64-thermal.dtsi b/arch/arm/dts/k3-am64-thermal.dtsi deleted file mode 100644 index 036db56..0000000 --- a/arch/arm/dts/k3-am64-thermal.dtsi +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -#include <dt-bindings/thermal/thermal.h> - -thermal_zones: thermal-zones { - main0_thermal: main0-thermal { - polling-delay-passive = <250>; /* milliSeconds */ - polling-delay = <500>; /* milliSeconds */ - thermal-sensors = <&main_vtm0 0>; - - trips { - main0_crit: main0-crit { - temperature = <105000>; /* milliCelsius */ - hysteresis = <2000>; /* milliCelsius */ - type = "critical"; - }; - }; - }; - - main1_thermal: main1-thermal { - polling-delay-passive = <250>; /* milliSeconds */ - polling-delay = <500>; /* milliSeconds */ - thermal-sensors = <&main_vtm0 1>; - - trips { - main1_crit: main1-crit { - temperature = <105000>; /* milliCelsius */ - hysteresis = <2000>; /* milliCelsius */ - type = "critical"; - }; - }; - }; -}; diff --git a/arch/arm/dts/k3-am64.dtsi b/arch/arm/dts/k3-am64.dtsi deleted file mode 100644 index 8e9c2bc..0000000 --- a/arch/arm/dts/k3-am64.dtsi +++ /dev/null @@ -1,100 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for AM642 SoC Family - * - * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/soc/ti,sci_pm_domain.h> - -#include "k3-pinctrl.h" - -/ { - model = "Texas Instruments K3 AM642 SoC"; - compatible = "ti,am642"; - interrupt-parent = <&gic500>; - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - firmware { - optee { - compatible = "linaro,optee-tz"; - method = "smc"; - }; - - psci: psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - }; - - a53_timer0: timer-cl0-cpu0 { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ - <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ - <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ - <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ - }; - - pmu: pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; - }; - - cbass_main: bus@f4000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x00 0x000f4000 0x00 0x000f4000 0x00 0x000002d0>, /* PINCTRL */ - <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */ - <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ - <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */ - <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */ - <0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */ - <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ - <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_CORE */ - <0x00 0x0e000000 0x00 0x0e000000 0x00 0x00000100>, /* Main RTI0 */ - <0x00 0x0e010000 0x00 0x0e010000 0x00 0x00000100>, /* Main RTI1 */ - <0x00 0x0f000000 0x00 0x0f000000 0x00 0x00c44200>, /* Second peripheral window */ - <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */ - <0x00 0x30000000 0x00 0x30000000 0x00 0x000bc100>, /* ICSSG0/1 */ - <0x00 0x37000000 0x00 0x37000000 0x00 0x00040000>, /* TIMERMGR0 TIMERS */ - <0x00 0x39000000 0x00 0x39000000 0x00 0x00000400>, /* CPTS0 */ - <0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0_CFG */ - <0x00 0x3cd00000 0x00 0x3cd00000 0x00 0x00000200>, /* TIMERMGR0_CONFIG */ - <0x00 0x3f004000 0x00 0x3f004000 0x00 0x00000400>, /* GICSS0_REGS */ - <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA2_UL0 */ - <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* CTRL_MMR0 */ - <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ - <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMASS */ - <0x00 0x50000000 0x00 0x50000000 0x00 0x08000000>, /* GPMC0 DATA */ - <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */ - <0x00 0x68000000 0x00 0x68000000 0x00 0x08000000>, /* PCIe DAT0 */ - <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* OC SRAM */ - <0x00 0x78000000 0x00 0x78000000 0x00 0x00800000>, /* Main R5FSS */ - <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */ - <0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe DAT1 */ - <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */ - - /* MCU Domain Range */ - <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; - - cbass_mcu: bus@4000000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */ - }; - }; - - #include "k3-am64-thermal.dtsi" -}; - -/* Now include the peripherals for each bus segments */ -#include "k3-am64-main.dtsi" -#include "k3-am64-mcu.dtsi" diff --git a/arch/arm/dts/k3-am642-evm-u-boot.dtsi b/arch/arm/dts/k3-am642-evm-u-boot.dtsi index 60b219c..ee66567 100644 --- a/arch/arm/dts/k3-am642-evm-u-boot.dtsi +++ b/arch/arm/dts/k3-am642-evm-u-boot.dtsi @@ -9,97 +9,27 @@ chosen { tick-timer = &main_timer0; }; - - memory@80000000 { - bootph-all; - }; -}; - -&cbass_main { - bootph-all; }; &main_timer0 { - bootph-all; clock-frequency = <200000000>; }; -&main_conf { - bootph-all; - chipid@14 { - bootph-all; - }; -}; - -&main_pmx0 { - bootph-all; -}; - -&main_i2c0_pins_default { - bootph-all; -}; - -&main_i2c0 { - bootph-all; -}; - -&main_uart0_pins_default { - bootph-all; -}; - -&main_uart0 { - bootph-all; -}; - -&main_usb0_pins_default { - bootph-all; -}; - &usb0 { dr_mode="peripheral"; - bootph-all; -}; - -&usbss0 { - bootph-all; }; &main_mmc1_pins_default { bootph-all; }; -&main_usb0_pins_default { - bootph-all; -}; - -&dmss { - bootph-all; -}; - -&secure_proxy_main { - bootph-all; -}; - &dmsc { - bootph-all; k3_sysreset: sysreset-controller { compatible = "ti,sci-sysreset"; bootph-all; }; }; -&k3_pds { - bootph-all; -}; - -&k3_clks { - bootph-all; -}; - -&k3_reset { - bootph-all; -}; - &sdhci0 { bootph-all; }; @@ -108,10 +38,6 @@ bootph-all; }; -&sdhci1 { - bootph-all; -}; - &inta_main_dmss { bootph-all; }; @@ -143,42 +69,6 @@ bootph-all; }; -&mdio1_pins_default { - bootph-all; -}; - -&cpsw3g_mdio { - bootph-all; -}; - -&cpsw3g_phy0 { - bootph-all; -}; - -&rgmii1_pins_default { - bootph-all; -}; - -&rgmii2_pins_default { - bootph-all; -}; - -&cpsw3g { - bootph-all; - - ethernet-ports { - bootph-all; - }; -}; - -&phy_gmii_sel { - bootph-all; -}; - -&cpsw_port1 { - bootph-all; -}; - &cpsw_port2 { status = "disabled"; }; diff --git a/arch/arm/dts/k3-am642-evm.dts b/arch/arm/dts/k3-am642-evm.dts deleted file mode 100644 index b4a1f73..0000000 --- a/arch/arm/dts/k3-am642-evm.dts +++ /dev/null @@ -1,690 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ - */ - -/dts-v1/; - -#include <dt-bindings/phy/phy.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/net/ti-dp83867.h> -#include "k3-am642.dtsi" - -#include "k3-serdes.h" - -/ { - compatible = "ti,am642-evm", "ti,am642"; - model = "Texas Instruments AM642 EVM"; - - chosen { - stdout-path = &main_uart0; - }; - - aliases { - serial0 = &mcu_uart0; - serial1 = &main_uart1; - serial2 = &main_uart0; - serial3 = &main_uart3; - i2c0 = &main_i2c0; - i2c1 = &main_i2c1; - mmc0 = &sdhci0; - mmc1 = &sdhci1; - ethernet0 = &cpsw_port1; - ethernet1 = &cpsw_port2; - }; - - memory@80000000 { - device_type = "memory"; - /* 2G RAM */ - reg = <0x00000000 0x80000000 0x00000000 0x80000000>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - secure_ddr: optee@9e800000 { - reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ - alignment = <0x1000>; - no-map; - }; - - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa0000000 0x00 0x100000>; - no-map; - }; - - main_r5fss0_core0_memory_region: r5f-memory@a0100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa0100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa1000000 0x00 0x100000>; - no-map; - }; - - main_r5fss0_core1_memory_region: r5f-memory@a1100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa1100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa2000000 0x00 0x100000>; - no-map; - }; - - main_r5fss1_core0_memory_region: r5f-memory@a2100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa2100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa3000000 0x00 0x100000>; - no-map; - }; - - main_r5fss1_core1_memory_region: r5f-memory@a3100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa3100000 0x00 0xf00000>; - no-map; - }; - - rtos_ipc_memory_region: ipc-memories@a5000000 { - reg = <0x00 0xa5000000 0x00 0x00800000>; - alignment = <0x1000>; - no-map; - }; - }; - - evm_12v0: regulator-0 { - /* main DC jack */ - compatible = "regulator-fixed"; - regulator-name = "evm_12v0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - }; - - vsys_5v0: regulator-1 { - /* output of LM5140 */ - compatible = "regulator-fixed"; - regulator-name = "vsys_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&evm_12v0>; - regulator-always-on; - regulator-boot-on; - }; - - vsys_3v3: regulator-2 { - /* output of LM5140 */ - compatible = "regulator-fixed"; - regulator-name = "vsys_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&evm_12v0>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_mmc1: regulator-3 { - /* TPS2051BD */ - compatible = "regulator-fixed"; - regulator-name = "vdd_mmc1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - enable-active-high; - vin-supply = <&vsys_3v3>; - gpio = <&exp1 6 GPIO_ACTIVE_HIGH>; - }; - - vddb: regulator-4 { - compatible = "regulator-fixed"; - regulator-name = "vddb_3v3_display"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vsys_3v3>; - regulator-always-on; - regulator-boot-on; - }; - - vtt_supply: regulator-5 { - compatible = "regulator-fixed"; - regulator-name = "vtt"; - pinctrl-names = "default"; - pinctrl-0 = <&ddr_vtt_pins_default>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; - vin-supply = <&vsys_3v3>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "am64-evm:red:heartbeat"; - gpios = <&exp1 16 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - function = LED_FUNCTION_HEARTBEAT; - default-state = "off"; - }; - }; - - mdio_mux: mux-controller { - compatible = "gpio-mux"; - #mux-control-cells = <0>; - - mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>; - }; - - mdio-mux-1 { - compatible = "mdio-mux-multiplexer"; - mux-controls = <&mdio_mux>; - mdio-parent-bus = <&cpsw3g_mdio>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@1 { - reg = <0x1>; - #address-cells = <1>; - #size-cells = <0>; - - cpsw3g_phy3: ethernet-phy@3 { - reg = <3>; - }; - }; - }; - - transceiver1: can-phy0 { - compatible = "ti,tcan1042"; - #phy-cells = <0>; - max-bitrate = <5000000>; - standby-gpios = <&exp1 8 GPIO_ACTIVE_HIGH>; - }; - - transceiver2: can-phy1 { - compatible = "ti,tcan1042"; - #phy-cells = <0>; - max-bitrate = <5000000>; - standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>; - }; -}; - -&main_pmx0 { - main_mmc1_pins_default: main-mmc1-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ - AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ - AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ - AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ - AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ - AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ - AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ - AM64X_IOPAD(0x029c, PIN_INPUT, 0) /* (C20) MMC1_SDWP */ - AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */ - >; - }; - - main_uart1_pins_default: main-uart1-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ - AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ - AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ - AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ - >; - }; - - main_uart0_pins_default: main-uart0-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ - AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ - AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ - AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ - >; - }; - - main_spi0_pins_default: main-spi0-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */ - AM64X_IOPAD(0x0208, PIN_OUTPUT, 0) /* (D12) SPI0_CS0 */ - AM64X_IOPAD(0x0214, PIN_OUTPUT, 0) /* (A13) SPI0_D0 */ - AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */ - >; - }; - - main_i2c0_pins_default: main-i2c0-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ - AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ - >; - }; - - main_i2c1_pins_default: main-i2c1-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ - AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ - >; - }; - - mdio1_pins_default: mdio1-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ - AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ - >; - }; - - rgmii1_pins_default: rgmii1-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ - AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */ - AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */ - AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */ - AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */ - AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */ - AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */ - AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */ - AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */ - AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */ - AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */ - AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */ - >; - }; - - rgmii2_pins_default: rgmii2-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ - AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ - AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */ - AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */ - AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */ - AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */ - AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */ - AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */ - AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */ - AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */ - AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */ - AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */ - >; - }; - - main_usb0_pins_default: main-usb0-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ - >; - }; - - ospi0_pins_default: ospi0-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ - AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ - AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */ - AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */ - AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */ - AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */ - AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */ - AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */ - AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */ - AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ - AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ - >; - }; - - main_ecap0_pins_default: main-ecap0-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ - >; - }; - - main_mcan0_pins_default: main-mcan0-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ - AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ - >; - }; - - main_mcan1_pins_default: main-mcan1-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ - AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ - >; - }; - - ddr_vtt_pins_default: ddr-vtt-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */ - >; - }; -}; - -&main_uart0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_uart0_pins_default>; - current-speed = <115200>; -}; - -/* main_uart1 is reserved for firmware usage */ -&main_uart1 { - status = "reserved"; - pinctrl-names = "default"; - pinctrl-0 = <&main_uart1_pins_default>; -}; - -&main_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - clock-frequency = <400000>; - - eeprom@50 { - /* AT24CM01 */ - compatible = "atmel,24c1024"; - reg = <0x50>; - }; -}; - -&main_i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c1_pins_default>; - clock-frequency = <400000>; - - exp1: gpio@22 { - compatible = "ti,tca6424"; - reg = <0x22>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "GPIO_eMMC_RSTn", "CAN_MUX_SEL", - "GPIO_CPSW1_RST", "GPIO_RGMII1_RST", - "GPIO_RGMII2_RST", "GPIO_PCIe_RST_OUT", - "MMC1_SD_EN", "FSI_FET_SEL", - "MCAN0_STB_3V3", "MCAN1_STB_3V3", - "CPSW_FET_SEL", "CPSW_FET2_SEL", - "PRG1_RGMII2_FET_SEL", "TEST_GPIO2", - "GPIO_OLED_RESETn", "VPP_LDO_EN", - "TEST_LED1", "TP92", "TP90", "TP88", - "TP87", "TP86", "TP89", "TP91"; - }; - - /* osd9616p0899-10 */ - display@3c { - compatible = "solomon,ssd1306fb-i2c"; - reg = <0x3c>; - reset-gpios = <&exp1 14 GPIO_ACTIVE_LOW>; - vbat-supply = <&vddb>; - solomon,height = <16>; - solomon,width = <96>; - solomon,com-seq; - solomon,com-invdir; - solomon,page-offset = <0>; - solomon,prechargep1 = <2>; - solomon,prechargep2 = <13>; - }; -}; - -/* mcu_gpio0 is reserved for mcu firmware usage */ -&mcu_gpio0 { - status = "reserved"; -}; - -&main_spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_spi0_pins_default>; - ti,pindir-d0-out-d1-in; - eeprom@0 { - compatible = "microchip,93lc46b"; - reg = <0>; - spi-max-frequency = <1000000>; - spi-cs-high; - data-size = <16>; - }; -}; - -&sdhci0 { - /* emmc */ - bus-width = <8>; - non-removable; - ti,driver-strength-ohm = <50>; - disable-wp; -}; - -&sdhci1 { - /* SD/MMC */ - vmmc-supply = <&vdd_mmc1>; - pinctrl-names = "default"; - bus-width = <4>; - pinctrl-0 = <&main_mmc1_pins_default>; - ti,driver-strength-ohm = <50>; - disable-wp; -}; - -&usbss0 { - ti,vbus-divider; - ti,usb2-only; -}; - -&usb0 { - dr_mode = "otg"; - maximum-speed = "high-speed"; - pinctrl-names = "default"; - pinctrl-0 = <&main_usb0_pins_default>; -}; - -&cpsw3g { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; -}; - -&cpsw_port1 { - phy-mode = "rgmii-rxid"; - phy-handle = <&cpsw3g_phy0>; -}; - -&cpsw_port2 { - phy-mode = "rgmii-rxid"; - phy-handle = <&cpsw3g_phy3>; -}; - -&cpsw3g_mdio { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mdio1_pins_default>; - - cpsw3g_phy0: ethernet-phy@0 { - reg = <0>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - }; -}; - -&tscadc0 { - /* ADC is reserved for R5 usage */ - status = "reserved"; -}; - -&ospi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&ospi0_pins_default>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0x0>; - spi-tx-bus-width = <8>; - spi-rx-bus-width = <8>; - spi-max-frequency = <25000000>; - cdns,tshsl-ns = <60>; - cdns,tsd2d-ns = <60>; - cdns,tchsh-ns = <60>; - cdns,tslch-ns = <60>; - cdns,read-delay = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ospi.tiboot3"; - reg = <0x0 0x100000>; - }; - - partition@100000 { - label = "ospi.tispl"; - reg = <0x100000 0x200000>; - }; - - partition@300000 { - label = "ospi.u-boot"; - reg = <0x300000 0x400000>; - }; - - partition@700000 { - label = "ospi.env"; - reg = <0x700000 0x40000>; - }; - - partition@740000 { - label = "ospi.env.backup"; - reg = <0x740000 0x40000>; - }; - - partition@800000 { - label = "ospi.rootfs"; - reg = <0x800000 0x37c0000>; - }; - - partition@3fc0000 { - label = "ospi.phypattern"; - reg = <0x3fc0000 0x40000>; - }; - }; - }; -}; - -&mailbox0_cluster2 { - status = "okay"; - - mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { - ti,mbox-rx = <0 0 2>; - ti,mbox-tx = <1 0 2>; - }; - - mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { - ti,mbox-rx = <2 0 2>; - ti,mbox-tx = <3 0 2>; - }; -}; - -&mailbox0_cluster4 { - status = "okay"; - - mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { - ti,mbox-rx = <0 0 2>; - ti,mbox-tx = <1 0 2>; - }; - - mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { - ti,mbox-rx = <2 0 2>; - ti,mbox-tx = <3 0 2>; - }; -}; - -&mailbox0_cluster6 { - status = "okay"; - - mbox_m4_0: mbox-m4-0 { - ti,mbox-rx = <0 0 2>; - ti,mbox-tx = <1 0 2>; - }; -}; - -&main_r5fss0_core0 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>; - memory-region = <&main_r5fss0_core0_dma_memory_region>, - <&main_r5fss0_core0_memory_region>; -}; - -&main_r5fss0_core1 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>; - memory-region = <&main_r5fss0_core1_dma_memory_region>, - <&main_r5fss0_core1_memory_region>; -}; - -&main_r5fss1_core0 { - mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>; - memory-region = <&main_r5fss1_core0_dma_memory_region>, - <&main_r5fss1_core0_memory_region>; -}; - -&main_r5fss1_core1 { - mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>; - memory-region = <&main_r5fss1_core1_dma_memory_region>, - <&main_r5fss1_core1_memory_region>; -}; - -&serdes_ln_ctrl { - idle-states = <AM64_SERDES0_LANE0_PCIE0>; -}; - -&serdes0 { - serdes0_pcie_link: phy@0 { - reg = <0>; - cdns,num-lanes = <1>; - #phy-cells = <0>; - cdns,phy-type = <PHY_TYPE_PCIE>; - resets = <&serdes_wiz0 1>; - }; -}; - -&pcie0_rc { - status = "okay"; - reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>; - phys = <&serdes0_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <1>; -}; - -&pcie0_ep { - phys = <&serdes0_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <1>; -}; - -&ecap0 { - status = "okay"; - /* PWM is available on Pin 1 of header J12 */ - pinctrl-names = "default"; - pinctrl-0 = <&main_ecap0_pins_default>; -}; - -&main_mcan0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_mcan0_pins_default>; - phys = <&transceiver1>; -}; - -&main_mcan1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_mcan1_pins_default>; - phys = <&transceiver2>; -}; diff --git a/arch/arm/dts/k3-am642-r5-evm.dts b/arch/arm/dts/k3-am642-r5-evm.dts index 6825c07..be85969 100644 --- a/arch/arm/dts/k3-am642-r5-evm.dts +++ b/arch/arm/dts/k3-am642-r5-evm.dts @@ -40,10 +40,6 @@ }; }; -&vtt_supply { - bootph-pre-ram; -}; - &cbass_main { sysctrler: sysctrler { compatible = "ti,am654-system-controller"; @@ -53,18 +49,6 @@ }; }; -&main_esm { - bootph-pre-ram; -}; - -&cbass_mcu { - bootph-pre-ram; -}; - -&mcu_esm { - bootph-pre-ram; -}; - &dmsc { mboxes= <&secure_proxy_main 0>, <&secure_proxy_main 1>, @@ -74,10 +58,6 @@ ti,secure-host; }; -&vtt_supply { - bootph-pre-ram; -}; - &memorycontroller { vtt-supply = <&vtt_supply>; }; @@ -92,10 +72,6 @@ clock-names = "clk_xin"; }; -&main_gpio0 { - bootph-pre-ram; -}; - /* UART is initialized before SYSFW is started * so we can't do any power-domain/clock operations. * Delete clock/power-domain properties to avoid diff --git a/arch/arm/dts/k3-am642-r5-sk.dts b/arch/arm/dts/k3-am642-r5-sk.dts index 60d747d..2186152 100644 --- a/arch/arm/dts/k3-am642-r5-sk.dts +++ b/arch/arm/dts/k3-am642-r5-sk.dts @@ -49,18 +49,6 @@ }; }; -&main_esm { - bootph-pre-ram; -}; - -&cbass_mcu { - bootph-pre-ram; -}; - -&mcu_esm { - bootph-pre-ram; -}; - &dmsc { mboxes= <&secure_proxy_main 0>, <&secure_proxy_main 1>, diff --git a/arch/arm/dts/k3-am642-sk-u-boot.dtsi b/arch/arm/dts/k3-am642-sk-u-boot.dtsi index 2f93eb6..7e6b298 100644 --- a/arch/arm/dts/k3-am642-sk-u-boot.dtsi +++ b/arch/arm/dts/k3-am642-sk-u-boot.dtsi @@ -9,87 +9,21 @@ chosen { tick-timer = &main_timer0; }; - - memory@80000000 { - bootph-all; - }; -}; - -&cbass_main{ - bootph-all; }; &main_timer0 { - bootph-all; clock-frequency = <200000000>; }; -&main_conf { - bootph-all; - chipid@14 { - bootph-all; - }; -}; - -&main_pmx0 { - bootph-all; -}; - -&main_i2c0_pins_default { - bootph-all; -}; - -&main_i2c0 { - bootph-all; -}; - -&main_uart0_pins_default { - bootph-all; -}; - -&main_uart0 { - bootph-all; -}; - -&dmss { - bootph-all; -}; - -&secure_proxy_main { - bootph-all; -}; - &dmsc { - bootph-all; k3_sysreset: sysreset-controller { compatible = "ti,sci-sysreset"; bootph-all; }; }; -&k3_pds { - bootph-all; -}; - -&k3_clks { - bootph-all; -}; - -&k3_reset { - bootph-all; -}; - &sdhci0 { status = "disabled"; - bootph-all; -}; - -&sdhci1 { - bootph-all; -}; - -&main_mmc1_pins_default { - bootph-all; }; &inta_main_dmss { @@ -180,38 +114,10 @@ bootph-all; }; -&main_usb0_pins_default { - bootph-all; -}; - &serdes_ln_ctrl { bootph-all; }; -&usbss0 { - bootph-all; -}; - -&usb0 { - bootph-all; -}; - -&serdes_wiz0 { - bootph-all; -}; - -&serdes0_usb_link { - bootph-all; -}; - -&serdes0 { - bootph-all; -}; - -&serdes_refclk { - bootph-all; -}; - &ospi0_pins_default { bootph-all; }; diff --git a/arch/arm/dts/k3-am642-sk.dts b/arch/arm/dts/k3-am642-sk.dts deleted file mode 100644 index 722fd28..0000000 --- a/arch/arm/dts/k3-am642-sk.dts +++ /dev/null @@ -1,642 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ - */ - -/dts-v1/; - -#include <dt-bindings/phy/phy.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/net/ti-dp83867.h> -#include <dt-bindings/leds/common.h> -#include "k3-am642.dtsi" - -#include "k3-serdes.h" - -/ { - compatible = "ti,am642-sk", "ti,am642"; - model = "Texas Instruments AM642 SK"; - - chosen { - stdout-path = &main_uart0; - }; - - aliases { - serial0 = &mcu_uart0; - serial1 = &main_uart1; - serial2 = &main_uart0; - i2c0 = &main_i2c0; - i2c1 = &main_i2c1; - mmc0 = &sdhci0; - mmc1 = &sdhci1; - ethernet0 = &cpsw_port1; - ethernet1 = &cpsw_port2; - }; - - memory@80000000 { - device_type = "memory"; - /* 2G RAM */ - reg = <0x00000000 0x80000000 0x00000000 0x80000000>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - secure_ddr: optee@9e800000 { - reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ - alignment = <0x1000>; - no-map; - }; - - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa0000000 0x00 0x100000>; - no-map; - }; - - main_r5fss0_core0_memory_region: r5f-memory@a0100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa0100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa1000000 0x00 0x100000>; - no-map; - }; - - main_r5fss0_core1_memory_region: r5f-memory@a1100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa1100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa2000000 0x00 0x100000>; - no-map; - }; - - main_r5fss1_core0_memory_region: r5f-memory@a2100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa2100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa3000000 0x00 0x100000>; - no-map; - }; - - main_r5fss1_core1_memory_region: r5f-memory@a3100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa3100000 0x00 0xf00000>; - no-map; - }; - - rtos_ipc_memory_region: ipc-memories@a5000000 { - reg = <0x00 0xa5000000 0x00 0x00800000>; - alignment = <0x1000>; - no-map; - }; - }; - - vusb_main: regulator-0 { - /* USB MAIN INPUT 5V DC */ - compatible = "regulator-fixed"; - regulator-name = "vusb_main5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_3v3_sys: regulator-1 { - /* output of LP8733xx */ - compatible = "regulator-fixed"; - regulator-name = "vcc_3v3_sys"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vusb_main>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_mmc1: regulator-2 { - /* TPS2051BD */ - compatible = "regulator-fixed"; - regulator-name = "vdd_mmc1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - enable-active-high; - vin-supply = <&vcc_3v3_sys>; - gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; - }; - - com8_ls_en: regulator-3 { - compatible = "regulator-fixed"; - regulator-name = "com8_ls_en"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - pinctrl-0 = <&main_com8_ls_en_pins_default>; - pinctrl-names = "default"; - gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>; - }; - - wlan_en: regulator-4 { - /* output of SN74AVC4T245RSVR */ - compatible = "regulator-fixed"; - regulator-name = "wlan_en"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - enable-active-high; - pinctrl-0 = <&main_wlan_en_pins_default>; - pinctrl-names = "default"; - vin-supply = <&com8_ls_en>; - gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>; - }; - - led-controller { - compatible = "gpio-leds"; - - led-0 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <1>; - gpios = <&exp2 0 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - led-1 { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <2>; - gpios = <&exp2 1 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - led-2 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <3>; - gpios = <&exp2 2 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - led-3 { - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <4>; - gpios = <&exp2 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - led-4 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <5>; - gpios = <&exp2 4 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - led-5 { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <6>; - gpios = <&exp2 5 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - led-6 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <7>; - gpios = <&exp2 6 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - led-7 { - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_HEARTBEAT; - function-enumerator = <8>; - linux,default-trigger = "heartbeat"; - gpios = <&exp2 7 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&main_pmx0 { - main_mmc1_pins_default: main-mmc1-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */ - AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ - AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ - AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* (#N/A) MMC1_CLKLB */ - AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ - AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ - AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ - AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ - AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ - >; - }; - - main_uart0_pins_default: main-uart0-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ - AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ - AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ - AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ - >; - }; - - main_uart1_pins_default: main-uart1-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ - AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ - AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ - AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ - >; - }; - - main_usb0_pins_default: main-usb0-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ - >; - }; - - main_i2c0_pins_default: main-i2c0-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ - AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ - >; - }; - - main_i2c1_pins_default: main-i2c1-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ - AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ - >; - }; - - mdio1_pins_default: mdio1-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ - AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ - >; - }; - - rgmii1_pins_default: rgmii1-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x011c, PIN_INPUT, 4) /* (AA13) PRG1_PRU1_GPO5.RGMII1_RD0 */ - AM64X_IOPAD(0x0128, PIN_INPUT, 4) /* (U12) PRG1_PRU1_GPO8.RGMII1_RD1 */ - AM64X_IOPAD(0x0150, PIN_INPUT, 4) /* (Y13) PRG1_PRU1_GPO18.RGMII1_RD2 */ - AM64X_IOPAD(0x0154, PIN_INPUT, 4) /* (V12) PRG1_PRU1_GPO19.RGMII1_RD3 */ - AM64X_IOPAD(0x00d8, PIN_INPUT, 4) /* (W13) PRG1_PRU0_GPO8.RGMII1_RXC */ - AM64X_IOPAD(0x00cc, PIN_INPUT, 4) /* (V13) PRG1_PRU0_GPO5.RGMII1_RX_CTL */ - AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */ - AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */ - AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */ - AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */ - AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */ - AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */ - >; - }; - - rgmii2_pins_default: rgmii2-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ - AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ - AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */ - AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */ - AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */ - AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */ - AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */ - AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */ - AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */ - AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */ - AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */ - AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */ - >; - }; - - ospi0_pins_default: ospi0-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ - AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ - AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */ - AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */ - AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */ - AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */ - AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */ - AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */ - AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */ - AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ - AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ - >; - }; - - main_ecap0_pins_default: main-ecap0-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ - >; - }; - main_wlan_en_pins_default: main-wlan-en-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */ - >; - }; - - main_com8_ls_en_pins_default: main-com8-ls-en-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */ - >; - }; - - main_wlan_pins_default: main-wlan-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */ - >; - }; -}; - -&main_uart0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_uart0_pins_default>; - current-speed = <115200>; -}; - -&main_uart1 { - /* main_uart1 is reserved for firmware usage */ - status = "reserved"; - pinctrl-names = "default"; - pinctrl-0 = <&main_uart1_pins_default>; -}; - -&main_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - clock-frequency = <400000>; - - eeprom@51 { - compatible = "atmel,24c512"; - reg = <0x51>; - }; -}; - -&main_i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c1_pins_default>; - clock-frequency = <400000>; - - exp1: gpio@70 { - compatible = "nxp,pca9538"; - reg = <0x70>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", - "PRU_DETECT", "MMC1_SD_EN", - "VPP_LDO_EN", "RPI_PS_3V3_En", - "RPI_PS_5V0_En", "RPI_HAT_DETECT"; - }; - - exp2: gpio@60 { - compatible = "ti,tpic2810"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8"; - }; -}; - -/* mcu_gpio0 is reserved for mcu firmware usage */ -&mcu_gpio0 { - status = "reserved"; -}; - -&sdhci0 { - vmmc-supply = <&wlan_en>; - bus-width = <4>; - non-removable; - cap-power-off-card; - keep-power-in-suspend; - ti,driver-strength-ohm = <50>; - - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1837"; - reg = <2>; - pinctrl-0 = <&main_wlan_pins_default>; - pinctrl-names = "default"; - interrupt-parent = <&main_gpio0>; - interrupts = <46 IRQ_TYPE_EDGE_FALLING>; - }; -}; - -&sdhci1 { - /* SD/MMC */ - vmmc-supply = <&vdd_mmc1>; - pinctrl-names = "default"; - bus-width = <4>; - pinctrl-0 = <&main_mmc1_pins_default>; - ti,driver-strength-ohm = <50>; - disable-wp; -}; - -&serdes_ln_ctrl { - idle-states = <AM64_SERDES0_LANE0_USB>; -}; - -&serdes0 { - serdes0_usb_link: phy@0 { - reg = <0>; - cdns,num-lanes = <1>; - #phy-cells = <0>; - cdns,phy-type = <PHY_TYPE_USB3>; - resets = <&serdes_wiz0 1>; - }; -}; - -&usbss0 { - ti,vbus-divider; -}; - -&usb0 { - dr_mode = "host"; - maximum-speed = "super-speed"; - pinctrl-names = "default"; - pinctrl-0 = <&main_usb0_pins_default>; - phys = <&serdes0_usb_link>; - phy-names = "cdns3,usb3-phy"; -}; - -&cpsw3g { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; -}; - -&cpsw_port1 { - phy-mode = "rgmii-rxid"; - phy-handle = <&cpsw3g_phy0>; -}; - -&cpsw_port2 { - phy-mode = "rgmii-rxid"; - phy-handle = <&cpsw3g_phy1>; -}; - -&cpsw3g_mdio { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mdio1_pins_default>; - - cpsw3g_phy0: ethernet-phy@0 { - reg = <0>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - }; - - cpsw3g_phy1: ethernet-phy@1 { - reg = <1>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - }; -}; - -&ospi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&ospi0_pins_default>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0x0>; - spi-tx-bus-width = <8>; - spi-rx-bus-width = <8>; - spi-max-frequency = <25000000>; - cdns,tshsl-ns = <60>; - cdns,tsd2d-ns = <60>; - cdns,tchsh-ns = <60>; - cdns,tslch-ns = <60>; - cdns,read-delay = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ospi.tiboot3"; - reg = <0x0 0x100000>; - }; - - partition@100000 { - label = "ospi.tispl"; - reg = <0x100000 0x200000>; - }; - - partition@300000 { - label = "ospi.u-boot"; - reg = <0x300000 0x400000>; - }; - - partition@700000 { - label = "ospi.env"; - reg = <0x700000 0x40000>; - }; - - partition@740000 { - label = "ospi.env.backup"; - reg = <0x740000 0x40000>; - }; - - partition@800000 { - label = "ospi.rootfs"; - reg = <0x800000 0x37c0000>; - }; - - partition@3fc0000 { - label = "ospi.phypattern"; - reg = <0x3fc0000 0x40000>; - }; - }; - }; -}; - -&mailbox0_cluster2 { - status = "okay"; - - mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { - ti,mbox-rx = <0 0 2>; - ti,mbox-tx = <1 0 2>; - }; - - mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { - ti,mbox-rx = <2 0 2>; - ti,mbox-tx = <3 0 2>; - }; -}; - -&mailbox0_cluster4 { - status = "okay"; - - mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { - ti,mbox-rx = <0 0 2>; - ti,mbox-tx = <1 0 2>; - }; - - mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { - ti,mbox-rx = <2 0 2>; - ti,mbox-tx = <3 0 2>; - }; -}; - -&mailbox0_cluster6 { - status = "okay"; - - mbox_m4_0: mbox-m4-0 { - ti,mbox-rx = <0 0 2>; - ti,mbox-tx = <1 0 2>; - }; -}; - -&main_r5fss0_core0 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>; - memory-region = <&main_r5fss0_core0_dma_memory_region>, - <&main_r5fss0_core0_memory_region>; -}; - -&main_r5fss0_core1 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>; - memory-region = <&main_r5fss0_core1_dma_memory_region>, - <&main_r5fss0_core1_memory_region>; -}; - -&main_r5fss1_core0 { - mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>; - memory-region = <&main_r5fss1_core0_dma_memory_region>, - <&main_r5fss1_core0_memory_region>; -}; - -&main_r5fss1_core1 { - mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>; - memory-region = <&main_r5fss1_core1_dma_memory_region>, - <&main_r5fss1_core1_memory_region>; -}; - -&ecap0 { - status = "okay"; - /* PWM is available on Pin 1 of header J3 */ - pinctrl-names = "default"; - pinctrl-0 = <&main_ecap0_pins_default>; -}; diff --git a/arch/arm/dts/k3-am642.dtsi b/arch/arm/dts/k3-am642.dtsi deleted file mode 100644 index 7a6eede..0000000 --- a/arch/arm/dts/k3-am642.dtsi +++ /dev/null @@ -1,66 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for AM642 SoC family in Dual core configuration - * - * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ - */ - -/dts-v1/; - -#include "k3-am64.dtsi" - -/ { - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu-map { - cluster0: cluster0 { - core0 { - cpu = <&cpu0>; - }; - - core1 { - cpu = <&cpu1>; - }; - }; - }; - - cpu0: cpu@0 { - compatible = "arm,cortex-a53"; - reg = <0x000>; - device_type = "cpu"; - enable-method = "psci"; - i-cache-size = <0x8000>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <0x8000>; - d-cache-line-size = <64>; - d-cache-sets = <128>; - next-level-cache = <&L2_0>; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a53"; - reg = <0x001>; - device_type = "cpu"; - enable-method = "psci"; - i-cache-size = <0x8000>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <0x8000>; - d-cache-line-size = <64>; - d-cache-sets = <128>; - next-level-cache = <&L2_0>; - }; - }; - - L2_0: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - cache-unified; - cache-size = <0x40000>; - cache-line-size = <64>; - cache-sets = <256>; - }; -}; diff --git a/arch/arm/dts/k3-am64x-binman.dtsi b/arch/arm/dts/k3-am64x-binman.dtsi index 88df214..37817ba 100644 --- a/arch/arm/dts/k3-am64x-binman.dtsi +++ b/arch/arm/dts/k3-am64x-binman.dtsi @@ -118,11 +118,11 @@ #ifdef CONFIG_TARGET_AM642_A53_EVM -#define SPL_AM642_EVM_DTB "spl/dts/k3-am642-evm.dtb" -#define SPL_AM642_SK_DTB "spl/dts/k3-am642-sk.dtb" +#define SPL_AM642_EVM_DTB "spl/dts/ti/k3-am642-evm.dtb" +#define SPL_AM642_SK_DTB "spl/dts/ti/k3-am642-sk.dtb" #define AM642_EVM_DTB "u-boot.dtb" -#define AM642_SK_DTB "arch/arm/dts/k3-am642-sk.dtb" +#define AM642_SK_DTB "dts/upstream/src/arm64/ti/k3-am642-sk.dtb" &binman { ti-spl { diff --git a/arch/arm/dts/stv0991.dts b/arch/arm/dts/stv0991.dts deleted file mode 100644 index b04e899..0000000 --- a/arch/arm/dts/stv0991.dts +++ /dev/null @@ -1,55 +0,0 @@ -/dts-v1/; - -/ { - model = "ST STV0991 application board"; - compatible = "st,stv0991"; - #address-cells = <1>; - #size-cells = <1>; - - chosen { - stdout-path = &uart0; - }; - - memory { - device_type="memory"; - reg = <0x0 0x198000>; - }; - - uart0: serial@0x80406000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x80406000 0x1000>; - clock = <2700000>; - }; - - aliases { - spi0 = "/spi@80203000"; /* QSPI */ - }; - - qspi: spi@80203000 { - compatible = "cdns,qspi-nor"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x80203000 0x100>, - <0x40000000 0x1000000>; - clocks = <3750000>; - cdns,fifo-depth = <256>; - cdns,fifo-width = <4>; - cdns,trigger-address = <0x40000000>; - status = "okay"; - - flash0: n25q32@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; /* chip select */ - spi-max-frequency = <50000000>; - m25p,fast-read; - page-size = <256>; - block-size = <16>; /* 2^16, 64KB */ - cdns,tshsl-ns = <50>; - cdns,tsd2d-ns = <50>; - cdns,tchsh-ns = <4>; - cdns,tslch-ns = <4>; - }; - }; -}; diff --git a/arch/arm/include/asm/arch-stv0991/gpio.h b/arch/arm/include/asm/arch-stv0991/gpio.h deleted file mode 100644 index b27f407..0000000 --- a/arch/arm/include/asm/arch-stv0991/gpio.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014, STMicroelectronics - All Rights Reserved - * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - */ - -#ifndef __ASM_ARCH_STV0991_GPIO_H -#define __ASM_ARCH_STV0991_GPIO_H - -enum gpio_direction { - GPIO_DIRECTION_IN, - GPIO_DIRECTION_OUT, -}; - -struct gpio_regs { - u32 data; /* offset 0x0 */ - u32 reserved[0xff]; /* 0x4--0x3fc */ - u32 dir; /* offset 0x400 */ -}; - -#endif /* __ASM_ARCH_STV0991_GPIO_H */ diff --git a/arch/arm/include/asm/arch-stv0991/hardware.h b/arch/arm/include/asm/arch-stv0991/hardware.h deleted file mode 100644 index ea8f820..0000000 --- a/arch/arm/include/asm/arch-stv0991/hardware.h +++ /dev/null @@ -1,72 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014, STMicroelectronics - All Rights Reserved - * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - */ - -#ifndef _ASM_ARCH_HARDWARE_H -#define _ASM_ARCH_HARDWARE_H - -/* STV0991 */ -#define SRAM0_BASE_ADDR 0x00000000UL -#define SRAM1_BASE_ADDR 0x00068000UL -#define SRAM2_BASE_ADDR 0x000D0000UL -#define SRAM3_BASE_ADDR 0x00138000UL -#define CFS_SRAM0_BASE_ADDR 0x00198000UL -#define CFS_SRAM1_BASE_ADDR 0x001B8000UL -#define FAST_SRAM_BASE_ADDR 0x001D8000UL -#define FLASH_BASE_ADDR 0x40000000UL -#define PL310_BASE_ADDR 0x70000000UL -#define HSAXIM_BASE_ADDR 0x70100000UL -#define IMGSS_BASE_ADDR 0x70200000UL -#define ADC_BASE_ADDR 0x80000000UL -#define GPIOA_BASE_ADDR 0x80001000UL -#define GPIOB_BASE_ADDR 0x80002000UL -#define GPIOC_BASE_ADDR 0x80003000UL -#define HDM_BASE_ADDR 0x80004000UL -#define THSENS_BASE_ADDR 0x80200000UL -#define GPTIMER2_BASE_ADDR 0x80201000UL -#define GPTIMER1_BASE_ADDR 0x80202000UL -#define QSPI_BASE_ADDR 0x80203000UL -#define CGU_BASE_ADDR 0x80204000UL -#define CREG_BASE_ADDR 0x80205000UL -#define PEC_BASE_ADDR 0x80206000UL -#define WDRU_BASE_ADDR 0x80207000UL -#define BSEC_BASE_ADDR 0x80208000UL -#define DAP_ROM_BASE_ADDR 0x80210000UL -#define SOC_CTI_BASE_ADDR 0x80211000UL -#define TPIU_BASE_ADDR 0x80212000UL -#define TMC_ETF_BASE_ADDR 0x80213000UL -#define R4_ETM_BASE_ADDR 0x80214000UL -#define R4_CTI_BASE_ADDR 0x80215000UL -#define R4_DBG_BASE_ADDR 0x80216000UL -#define GMAC_BASE_ADDR 0x80300000UL -#define RNSS_BASE_ADDR 0x80302000UL -#define CRYP_BASE_ADDR 0x80303000UL -#define HASH_BASE_ADDR 0x80304000UL -#define GPDMA_BASE_ADDR 0x80305000UL -#define ISA_BASE_ADDR 0x8032A000UL -#define HCI_BASE_ADDR 0x80400000UL -#define I2C1_BASE_ADDR 0x80401000UL -#define I2C2_BASE_ADDR 0x80402000UL -#define SAI_BASE_ADDR 0x80403000UL -#define USI_BASE_ADDR 0x80404000UL -#define SPI1_BASE_ADDR 0x80405000UL -#define UART_BASE_ADDR 0x80406000UL -#define SPI2_BASE_ADDR 0x80500000UL -#define CAN_BASE_ADDR 0x80501000UL -#define USART1_BASE_ADDR 0x80502000UL -#define USART2_BASE_ADDR 0x80503000UL -#define USART3_BASE_ADDR 0x80504000UL -#define USART4_BASE_ADDR 0x80505000UL -#define USART5_BASE_ADDR 0x80506000UL -#define USART6_BASE_ADDR 0x80507000UL -#define SDI2_BASE_ADDR 0x80600000UL -#define SDI1_BASE_ADDR 0x80601000UL -#define VICA_BASE_ADDR 0x81000000UL -#define VICB_BASE_ADDR 0x81001000UL -#define STM_CHANNELS_BASE_ADDR 0x81100000UL -#define STM_BASE_ADDR 0x81110000UL -#define SROM_BASE_ADDR 0xFFFF0000UL - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h b/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h deleted file mode 100644 index df9dd54..0000000 --- a/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h +++ /dev/null @@ -1,130 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014, STMicroelectronics - All Rights Reserved - * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - */ - -#ifndef _STV0991_CGU_H -#define _STV0991_CGU_H - -struct stv0991_cgu_regs { - u32 cpu_freq; /* offset 0x0 */ - u32 icn2_freq; /* offset 0x4 */ - u32 dma_freq; /* offset 0x8 */ - u32 isp_freq; /* offset 0xc */ - u32 h264_freq; /* offset 0x10 */ - u32 osif_freq; /* offset 0x14 */ - u32 ren_freq; /* offset 0x18 */ - u32 tim_freq; /* offset 0x1c */ - u32 sai_freq; /* offset 0x20 */ - u32 eth_freq; /* offset 0x24 */ - u32 i2c_freq; /* offset 0x28 */ - u32 spi_freq; /* offset 0x2c */ - u32 uart_freq; /* offset 0x30 */ - u32 qspi_freq; /* offset 0x34 */ - u32 sdio_freq; /* offset 0x38 */ - u32 usi_freq; /* offset 0x3c */ - u32 can_line_freq; /* offset 0x40 */ - u32 debug_freq; /* offset 0x44 */ - u32 trace_freq; /* offset 0x48 */ - u32 stm_freq; /* offset 0x4c */ - u32 eth_ctrl; /* offset 0x50 */ - u32 reserved[3]; /* offset 0x54 */ - u32 osc_ctrl; /* offset 0x60 */ - u32 pll1_ctrl; /* offset 0x64 */ - u32 pll1_freq; /* offset 0x68 */ - u32 pll1_fract; /* offset 0x6c */ - u32 pll1_spread; /* offset 0x70 */ - u32 pll1_status; /* offset 0x74 */ - u32 pll2_ctrl; /* offset 0x78 */ - u32 pll2_freq; /* offset 0x7c */ - u32 pll2_fract; /* offset 0x80 */ - u32 pll2_spread; /* offset 0x84 */ - u32 pll2_status; /* offset 0x88 */ - u32 cgu_enable_1; /* offset 0x8c */ - u32 cgu_enable_2; /* offset 0x90 */ - u32 cgu_isp_pulse; /* offset 0x94 */ - u32 cgu_h264_pulse; /* offset 0x98 */ - u32 cgu_osif_pulse; /* offset 0x9c */ - u32 cgu_ren_pulse; /* offset 0xa0 */ - -}; - -/* CGU Timer */ -#define CLK_TMR_OSC 0 -#define CLK_TMR_MCLK 1 -#define CLK_TMR_PLL1 2 -#define CLK_TMR_PLL2 3 -#define MDIV_SHIFT_TMR 3 -#define DIV_SHIFT_TMR 6 - -#define TIMER1_CLK_CFG (0 << DIV_SHIFT_TMR \ - | 0 << MDIV_SHIFT_TMR | CLK_TMR_MCLK) - -/* Clock Enable/Disable */ - -#define TIMER1_CLK_EN (1 << 15) - -/* CGU Uart config */ -#define CLK_UART_MCLK 0 -#define CLK_UART_PLL1 1 -#define CLK_UART_PLL2 2 - -#define MDIV_SHIFT_UART 3 -#define DIV_SHIFT_UART 6 - -#define UART_CLK_CFG (4 << DIV_SHIFT_UART \ - | 1 << MDIV_SHIFT_UART | CLK_UART_MCLK) - -/* CGU Ethernet clock config */ -#define CLK_ETH_MCLK 0 -#define CLK_ETH_PLL1 1 -#define CLK_ETH_PLL2 2 - -#define MDIV_SHIFT_ETH 3 -#define DIV_SHIFT_ETH 6 -#define DIV_ETH_125 9 -#define DIV_ETH_50 12 -#define DIV_ETH_P2P 15 - -#define ETH_CLK_CFG (4 << DIV_ETH_P2P | 4 << DIV_ETH_50 \ - | 1 << DIV_ETH_125 \ - | 0 << DIV_SHIFT_ETH \ - | 3 << MDIV_SHIFT_ETH | CLK_ETH_PLL1) - /* CGU Ethernet control */ - -#define ETH_CLK_TX_EXT_PHY 0 -#define ETH_CLK_TX_125M 1 -#define ETH_CLK_TX_25M 2 -#define ETH_CLK_TX_2M5 3 -#define ETH_CLK_TX_DIS 7 - -#define ETH_CLK_RX_EXT_PHY 0 -#define ETH_CLK_RX_25M 1 -#define ETH_CLK_RX_2M5 2 -#define ETH_CLK_RX_DIS 3 -#define RX_CLK_SHIFT 3 -#define ETH_CLK_MASK ~(0x1F) - -#define ETH_PHY_MODE_GMII 0 -#define ETH_PHY_MODE_RMII 1 -#define ETH_PHY_CLK_DIS 1 - -#define ETH_CLK_CTRL (ETH_CLK_RX_EXT_PHY << RX_CLK_SHIFT \ - | ETH_CLK_TX_EXT_PHY) -/* CGU qspi clock */ -#define DIV_HCLK1_SHIFT 9 -#define DIV_CRYP_SHIFT 6 -#define MDIV_QSPI_SHIFT 3 - -#define CLK_QSPI_OSC 0 -#define CLK_QSPI_MCLK 1 -#define CLK_QSPI_PLL1 2 -#define CLK_QSPI_PLL2 3 - -#define QSPI_CLK_CTRL (3 << DIV_HCLK1_SHIFT \ - | 1 << DIV_CRYP_SHIFT \ - | 0 << MDIV_QSPI_SHIFT \ - | CLK_QSPI_OSC) - -#endif diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_creg.h b/arch/arm/include/asm/arch-stv0991/stv0991_creg.h deleted file mode 100644 index 4d444a6..0000000 --- a/arch/arm/include/asm/arch-stv0991/stv0991_creg.h +++ /dev/null @@ -1,103 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014, STMicroelectronics - All Rights Reserved - * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - */ - -#ifndef _STV0991_CREG_H -#define _STV0991_CREG_H - -struct stv0991_creg { - u32 version; /* offset 0x0 */ - u32 hdpctl; /* offset 0x4 */ - u32 hdpval; /* offset 0x8 */ - u32 hdpgposet; /* offset 0xc */ - u32 hdpgpoclr; /* offset 0x10 */ - u32 hdpgpoval; /* offset 0x14 */ - u32 stm_mux; /* offset 0x18 */ - u32 sysctrl_1; /* offset 0x1c */ - u32 sysctrl_2; /* offset 0x20 */ - u32 sysctrl_3; /* offset 0x24 */ - u32 sysctrl_4; /* offset 0x28 */ - u32 reserved_1[0x35]; /* offset 0x2C-0xFC */ - u32 mux1; /* offset 0x100 */ - u32 mux2; /* offset 0x104 */ - u32 mux3; /* offset 0x108 */ - u32 mux4; /* offset 0x10c */ - u32 mux5; /* offset 0x110 */ - u32 mux6; /* offset 0x114 */ - u32 mux7; /* offset 0x118 */ - u32 mux8; /* offset 0x11c */ - u32 mux9; /* offset 0x120 */ - u32 mux10; /* offset 0x124 */ - u32 mux11; /* offset 0x128 */ - u32 mux12; /* offset 0x12c */ - u32 mux13; /* offset 0x130 */ - u32 reserved_2[0x33]; /* offset 0x134-0x1FC */ - u32 cfg_pad1; /* offset 0x200 */ - u32 cfg_pad2; /* offset 0x204 */ - u32 cfg_pad3; /* offset 0x208 */ - u32 cfg_pad4; /* offset 0x20c */ - u32 cfg_pad5; /* offset 0x210 */ - u32 cfg_pad6; /* offset 0x214 */ - u32 cfg_pad7; /* offset 0x218 */ - u32 reserved_3[0x39]; /* offset 0x21C-0x2FC */ - u32 vdd_pad1; /* offset 0x300 */ - u32 vdd_pad2; /* offset 0x304 */ - u32 reserved_4[0x3e]; /* offset 0x308-0x3FC */ - u32 vdd_comp1; /* offset 0x400 */ -}; - -/* CREG MUX 13 register */ -#define FLASH_CS_NC_SHIFT 4 -#define FLASH_CS_NC_MASK ~(7 << FLASH_CS_NC_SHIFT) -#define CFG_FLASH_CS_NC (0 << FLASH_CS_NC_SHIFT) - -#define FLASH_CLK_SHIFT 0 -#define FLASH_CLK_MASK ~(7 << FLASH_CLK_SHIFT) -#define CFG_FLASH_CLK (0 << FLASH_CLK_SHIFT) - -/* CREG MUX 12 register */ -#define GPIOC_30_MUX_SHIFT 24 -#define GPIOC_30_MUX_MASK ~(1 << GPIOC_30_MUX_SHIFT) -#define CFG_GPIOC_30_UART_TX (1 << GPIOC_30_MUX_SHIFT) - -#define GPIOC_31_MUX_SHIFT 28 -#define GPIOC_31_MUX_MASK ~(1 << GPIOC_31_MUX_SHIFT) -#define CFG_GPIOC_31_UART_RX (1 << GPIOC_31_MUX_SHIFT) - -/* CREG MUX 7 register */ -#define GPIOB_16_MUX_SHIFT 0 -#define GPIOB_16_MUX_MASK ~(1 << GPIOB_16_MUX_SHIFT) -#define CFG_GPIOB_16_UART_TX (1 << GPIOB_16_MUX_SHIFT) - -#define GPIOB_17_MUX_SHIFT 4 -#define GPIOB_17_MUX_MASK ~(1 << GPIOB_17_MUX_SHIFT) -#define CFG_GPIOB_17_UART_RX (1 << GPIOB_17_MUX_SHIFT) - -/* CREG CFG_PAD6 register */ - -#define GPIOC_31_MODE_SHIFT 30 -#define GPIOC_31_MODE_MASK ~(1 << GPIOC_31_MODE_SHIFT) -#define CFG_GPIOC_31_MODE_OD (0 << GPIOC_31_MODE_SHIFT) -#define CFG_GPIOC_31_MODE_PP (1 << GPIOC_31_MODE_SHIFT) - -#define GPIOC_30_MODE_SHIFT 28 -#define GPIOC_30_MODE_MASK ~(1 << GPIOC_30_MODE_SHIFT) -#define CFG_GPIOC_30_MODE_LOW (0 << GPIOC_30_MODE_SHIFT) -#define CFG_GPIOC_30_MODE_HIGH (1 << GPIOC_30_MODE_SHIFT) - -/* CREG Ethernet pad config */ - -#define VDD_ETH_PS_1V8 0 -#define VDD_ETH_PS_2V5 2 -#define VDD_ETH_PS_3V3 3 -#define VDD_ETH_PS_MASK 0x3 - -#define VDD_ETH_PS_SHIFT 12 -#define ETH_VDD_CFG (VDD_ETH_PS_1V8 << VDD_ETH_PS_SHIFT) - -#define VDD_ETH_M_PS_SHIFT 28 -#define ETH_M_VDD_CFG (VDD_ETH_PS_1V8 << VDD_ETH_M_PS_SHIFT) - -#endif diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_defs.h b/arch/arm/include/asm/arch-stv0991/stv0991_defs.h deleted file mode 100644 index 98d7cde..0000000 --- a/arch/arm/include/asm/arch-stv0991/stv0991_defs.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014, STMicroelectronics - All Rights Reserved - * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - */ - -#ifndef __STV0991_DEFS_H__ -#define __STV0991_DEFS_H__ -#include <asm/arch/stv0991_periph.h> - -extern int stv0991_pinmux_config(enum periph_id); -extern int clock_setup(enum periph_clock); - -#endif diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h b/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h deleted file mode 100644 index eb1ddca..0000000 --- a/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h +++ /dev/null @@ -1,41 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014, STMicroelectronics - All Rights Reserved - * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - */ - -#ifndef _STV0991_GPT_H -#define _STV0991_GPT_H - -#include <asm/arch-stv0991/hardware.h> - -struct gpt_regs { - u32 cr1; - u32 cr2; - u32 reserved_1; - u32 dier; /* dma_int_en */ - u32 sr; /* status reg */ - u32 egr; /* event gen */ - u32 reserved_2[3]; /* offset 0x18--0x20*/ - u32 cnt; - u32 psc; - u32 arr; -}; - -struct gpt_regs *const gpt1_regs_ptr = - (struct gpt_regs *) GPTIMER1_BASE_ADDR; - -/* Timer control1 register */ -#define GPT_CR1_CEN 0x0001 -#define GPT_MODE_AUTO_RELOAD (1 << 7) - -/* Timer prescalar reg */ -#define GPT_PRESCALER_128 0x128 - -/* Auto reload register for free running config */ -#define GPT_FREE_RUNNING 0xFFFF - -/* Timer, HZ specific defines */ -#define CFG_SYS_HZ_CLOCK ((27 * 1000 * 1000) / GPT_PRESCALER_128) - -#endif diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_periph.h b/arch/arm/include/asm/arch-stv0991/stv0991_periph.h deleted file mode 100644 index 7a50be1..0000000 --- a/arch/arm/include/asm/arch-stv0991/stv0991_periph.h +++ /dev/null @@ -1,45 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014, STMicroelectronics - All Rights Reserved - * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - */ - -#ifndef __ASM_ARM_ARCH_PERIPH_H -#define __ASM_ARM_ARCH_PERIPH_H - -/* - * Peripherals required for pinmux configuration. List will - * grow with support for more devices getting added. - * Numbering based on interrupt table. - * - */ -enum periph_id { - UART_GPIOC_30_31 = 0, - UART_GPIOB_16_17, - ETH_GPIOB_10_31_C_0_4, - QSPI_CS_CLK_PAD, - PERIPH_ID_I2C0, - PERIPH_ID_I2C1, - PERIPH_ID_I2C2, - PERIPH_ID_I2C3, - PERIPH_ID_I2C4, - PERIPH_ID_I2C5, - PERIPH_ID_I2C6, - PERIPH_ID_I2C7, - PERIPH_ID_SPI0, - PERIPH_ID_SPI1, - PERIPH_ID_SPI2, - PERIPH_ID_SDMMC0, - PERIPH_ID_SDMMC1, - PERIPH_ID_SDMMC2, - PERIPH_ID_SDMMC3, - PERIPH_ID_I2S1, -}; - -enum periph_clock { - UART_CLOCK_CFG = 0, - ETH_CLOCK_CFG, - QSPI_CLOCK_CFG, -}; - -#endif /* __ASM_ARM_ARCH_PERIPH_H */ diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h b/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h deleted file mode 100644 index 8cb8a8a..0000000 --- a/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014, STMicroelectronics - All Rights Reserved - * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - */ - -#ifndef _STV0991_WD_RST_H -#define _STV0991_WD_RST_H -#include <asm/arch-stv0991/hardware.h> - -struct stv0991_wd_ru { - u32 wdru_config; - u32 wdru_ctrl1; - u32 wdru_ctrl2; - u32 wdru_tim; - u32 wdru_count; - u32 wdru_stat; - u32 wdru_wrlock; -}; - -struct stv0991_wd_ru *const stv0991_wd_ru_ptr = \ - (struct stv0991_wd_ru *)WDRU_BASE_ADDR; - -/* Watchdog control register */ -#define WDRU_RST_SYS 0x1 - -#endif diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index f0704d9..eb7f3ad 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -473,12 +473,6 @@ config MIPS_TUNE_74KC config MIPS_TUNE_OCTEON3 bool -config 32BIT - bool - -config 64BIT - bool - config SWAP_IO_SPACE bool diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index ac52c5e..6c26f91f 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -288,12 +288,6 @@ endmenu config RISCV_ISA_A def_bool y -config 32BIT - bool - -config 64BIT - bool - config DMA_ADDR_T_64BIT bool default y if 64BIT diff --git a/board/anbernic/rgxx3_rk3566/Kconfig b/board/anbernic/rgxx3_rk3566/Kconfig index 6743a28..b5ee67c 100644 --- a/board/anbernic/rgxx3_rk3566/Kconfig +++ b/board/anbernic/rgxx3_rk3566/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "anbernic-rgxx3-rk3566" -config BOARD_SPECIFIC_OPTIONS - def_bool y - endif diff --git a/board/chipspark/popmetal_rk3288/Kconfig b/board/chipspark/popmetal_rk3288/Kconfig index a5f4043..22228ae 100644 --- a/board/chipspark/popmetal_rk3288/Kconfig +++ b/board/chipspark/popmetal_rk3288/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "popmetal_rk3288" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/edgeble/neural-compute-module-6/Kconfig b/board/edgeble/neural-compute-module-6/Kconfig index c445454..05de14f 100644 --- a/board/edgeble/neural-compute-module-6/Kconfig +++ b/board/edgeble/neural-compute-module-6/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "neural-compute-module-6" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/elgin/elgin_rv1108/Kconfig b/board/elgin/elgin_rv1108/Kconfig index be92431..e942e13 100644 --- a/board/elgin/elgin_rv1108/Kconfig +++ b/board/elgin/elgin_rv1108/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "elgin_rv1108" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/firefly/firefly-rk3288/Kconfig b/board/firefly/firefly-rk3288/Kconfig index 1c2bca8..ed1c9fc 100644 --- a/board/firefly/firefly-rk3288/Kconfig +++ b/board/firefly/firefly-rk3288/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "firefly-rk3288" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/firefly/firefly-rk3308/Kconfig b/board/firefly/firefly-rk3308/Kconfig index 80b1ad8..fd6b981 100644 --- a/board/firefly/firefly-rk3308/Kconfig +++ b/board/firefly/firefly-rk3308/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "firefly_rk3308" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/firefly/roc-pc-rk3399/Kconfig b/board/firefly/roc-pc-rk3399/Kconfig index 720fbbb..c211e9d 100644 --- a/board/firefly/roc-pc-rk3399/Kconfig +++ b/board/firefly/roc-pc-rk3399/Kconfig @@ -9,8 +9,5 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "roc-pc-rk3399" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/friendlyelec/nanopc-t6-rk3588/Kconfig b/board/friendlyelec/nanopc-t6-rk3588/Kconfig index 032ef48..e86a94c 100644 --- a/board/friendlyelec/nanopc-t6-rk3588/Kconfig +++ b/board/friendlyelec/nanopc-t6-rk3588/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "nanopc-t6-rk3588" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/geekbuying/geekbox/Kconfig b/board/geekbuying/geekbox/Kconfig index 41aa8fb..ac5aedf 100644 --- a/board/geekbuying/geekbox/Kconfig +++ b/board/geekbuying/geekbox/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "geekbox" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/google/gru/Kconfig b/board/google/gru/Kconfig index 1455e14..c84ebaf 100644 --- a/board/google/gru/Kconfig +++ b/board/google/gru/Kconfig @@ -9,9 +9,6 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "gru" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif if TARGET_CHROMEBOOK_KEVIN @@ -25,7 +22,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "gru" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/google/veyron/Kconfig b/board/google/veyron/Kconfig index 7f55d78..e24a2ae 100644 --- a/board/google/veyron/Kconfig +++ b/board/google/veyron/Kconfig @@ -9,9 +9,6 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "veyron" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif if TARGET_CHROMEBIT_MICKEY @@ -25,9 +22,6 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "veyron" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif if TARGET_CHROMEBOOK_MINNIE @@ -41,9 +35,6 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "veyron" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif if TARGET_CHROMEBOOK_SPEEDY @@ -57,7 +48,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "veyron" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/hardkernel/odroid_go2/Kconfig b/board/hardkernel/odroid_go2/Kconfig index cf3f7c9..82988df 100644 --- a/board/hardkernel/odroid_go2/Kconfig +++ b/board/hardkernel/odroid_go2/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "odroid_go2" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/hardkernel/odroid_m1/Kconfig b/board/hardkernel/odroid_m1/Kconfig index 999c494..0217c91 100644 --- a/board/hardkernel/odroid_m1/Kconfig +++ b/board/hardkernel/odroid_m1/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "odroid_m1" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/mqmaker/miqi_rk3288/Kconfig b/board/mqmaker/miqi_rk3288/Kconfig index 232a112..bb687c9 100644 --- a/board/mqmaker/miqi_rk3288/Kconfig +++ b/board/mqmaker/miqi_rk3288/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "miqi_rk3288" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/phytec/phycore_rk3288/Kconfig b/board/phytec/phycore_rk3288/Kconfig index 57cd8e2..09753ef 100644 --- a/board/phytec/phycore_rk3288/Kconfig +++ b/board/phytec/phycore_rk3288/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "phycore_rk3288" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/pine64/pinebook-pro-rk3399/Kconfig b/board/pine64/pinebook-pro-rk3399/Kconfig index 3bb7ca4..3eedbcd 100644 --- a/board/pine64/pinebook-pro-rk3399/Kconfig +++ b/board/pine64/pinebook-pro-rk3399/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "pinebook-pro-rk3399" -config BOARD_SPECIFIC_OPTIONS - def_bool y - endif diff --git a/board/pine64/pinephone-pro-rk3399/Kconfig b/board/pine64/pinephone-pro-rk3399/Kconfig index 13d6465..5f207df 100644 --- a/board/pine64/pinephone-pro-rk3399/Kconfig +++ b/board/pine64/pinephone-pro-rk3399/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "pinephone-pro-rk3399" -config BOARD_SPECIFIC_OPTIONS - def_bool y - endif diff --git a/board/pine64/quartz64_rk3566/Kconfig b/board/pine64/quartz64_rk3566/Kconfig index 3de1d8f..104b7a1 100644 --- a/board/pine64/quartz64_rk3566/Kconfig +++ b/board/pine64/quartz64_rk3566/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "quartz64_rk3566" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/pine64/quartzpro64-rk3588/Kconfig b/board/pine64/quartzpro64-rk3588/Kconfig index 96aa792..4147240 100644 --- a/board/pine64/quartzpro64-rk3588/Kconfig +++ b/board/pine64/quartzpro64-rk3588/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "quartzpro64-rk3588" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/pine64/rockpro64_rk3399/Kconfig b/board/pine64/rockpro64_rk3399/Kconfig index 3353f1f..93aab57 100644 --- a/board/pine64/rockpro64_rk3399/Kconfig +++ b/board/pine64/rockpro64_rk3399/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "rockpro64_rk3399" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/radxa/rock/Kconfig b/board/radxa/rock/Kconfig index 855b9b6..c9c4576 100644 --- a/board/radxa/rock/Kconfig +++ b/board/radxa/rock/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "rock" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/radxa/rock2/Kconfig b/board/radxa/rock2/Kconfig index c2ff9e9..82ecaba 100644 --- a/board/radxa/rock2/Kconfig +++ b/board/radxa/rock2/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "rock2" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/radxa/rock5a-rk3588s/Kconfig b/board/radxa/rock5a-rk3588s/Kconfig index 2d7fc85..82013ad 100644 --- a/board/radxa/rock5a-rk3588s/Kconfig +++ b/board/radxa/rock5a-rk3588s/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "rock5a-rk3588s" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/radxa/rock5b-rk3588/Kconfig b/board/radxa/rock5b-rk3588/Kconfig index 8f14446..41dfe24 100644 --- a/board/radxa/rock5b-rk3588/Kconfig +++ b/board/radxa/rock5b-rk3588/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "rock5b-rk3588" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rikomagic/mk808/Kconfig b/board/rikomagic/mk808/Kconfig index 4abad7e..61c27d2 100644 --- a/board/rikomagic/mk808/Kconfig +++ b/board/rikomagic/mk808/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "mk808" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/evb_px30/Kconfig b/board/rockchip/evb_px30/Kconfig index 0042c8e..03ed808 100644 --- a/board/rockchip/evb_px30/Kconfig +++ b/board/rockchip/evb_px30/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "evb_px30" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/evb_px5/Kconfig b/board/rockchip/evb_px5/Kconfig index 9a04ee7..7a42b4a 100644 --- a/board/rockchip/evb_px5/Kconfig +++ b/board/rockchip/evb_px5/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "evb_px5" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/evb_rk3036/Kconfig b/board/rockchip/evb_rk3036/Kconfig index ef45f62..4abe8cf 100644 --- a/board/rockchip/evb_rk3036/Kconfig +++ b/board/rockchip/evb_rk3036/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "evb_rk3036" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/evb_rk3128/Kconfig b/board/rockchip/evb_rk3128/Kconfig index 5b3095a..c36691c 100644 --- a/board/rockchip/evb_rk3128/Kconfig +++ b/board/rockchip/evb_rk3128/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "evb_rk3128" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/evb_rk3229/Kconfig b/board/rockchip/evb_rk3229/Kconfig index 361dcb1..f5862d5 100644 --- a/board/rockchip/evb_rk3229/Kconfig +++ b/board/rockchip/evb_rk3229/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "evb_rk3229" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/evb_rk3288/Kconfig b/board/rockchip/evb_rk3288/Kconfig index 8ab07f4..0707486 100644 --- a/board/rockchip/evb_rk3288/Kconfig +++ b/board/rockchip/evb_rk3288/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "evb_rk3288" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/evb_rk3308/Kconfig b/board/rockchip/evb_rk3308/Kconfig index 0074429..b12d7f8 100644 --- a/board/rockchip/evb_rk3308/Kconfig +++ b/board/rockchip/evb_rk3308/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "evb_rk3308" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/evb_rk3328/Kconfig b/board/rockchip/evb_rk3328/Kconfig index ef446b4..1e084bd 100644 --- a/board/rockchip/evb_rk3328/Kconfig +++ b/board/rockchip/evb_rk3328/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "evb_rk3328" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/evb_rk3399/Kconfig b/board/rockchip/evb_rk3399/Kconfig index 412b81c..597b0a6 100644 --- a/board/rockchip/evb_rk3399/Kconfig +++ b/board/rockchip/evb_rk3399/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "evb_rk3399" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/evb_rk3568/Kconfig b/board/rockchip/evb_rk3568/Kconfig index f3d3a7e..ab710c5 100644 --- a/board/rockchip/evb_rk3568/Kconfig +++ b/board/rockchip/evb_rk3568/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "evb_rk3568" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/evb_rk3588/Kconfig b/board/rockchip/evb_rk3588/Kconfig index d38efe6..5e15d2e 100644 --- a/board/rockchip/evb_rk3588/Kconfig +++ b/board/rockchip/evb_rk3588/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "evb_rk3588" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/evb_rv1108/Kconfig b/board/rockchip/evb_rv1108/Kconfig index 4a76e0b..91afefd 100644 --- a/board/rockchip/evb_rv1108/Kconfig +++ b/board/rockchip/evb_rv1108/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "evb_rv1108" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/kylin_rk3036/Kconfig b/board/rockchip/kylin_rk3036/Kconfig index 8d35b4e..debffe1 100644 --- a/board/rockchip/kylin_rk3036/Kconfig +++ b/board/rockchip/kylin_rk3036/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "kylin_rk3036" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/sheep_rk3368/Kconfig b/board/rockchip/sheep_rk3368/Kconfig index d39b5e8..321bf81 100644 --- a/board/rockchip/sheep_rk3368/Kconfig +++ b/board/rockchip/sheep_rk3368/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "sheep_rk3368" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/rockchip/tinker_rk3288/Kconfig b/board/rockchip/tinker_rk3288/Kconfig index bca6c37..04a9f14 100644 --- a/board/rockchip/tinker_rk3288/Kconfig +++ b/board/rockchip/tinker_rk3288/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "tinker_rk3288" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/socionext/developerbox/developerbox.c b/board/socionext/developerbox/developerbox.c index ac4415f..062e4a7 100644 --- a/board/socionext/developerbox/developerbox.c +++ b/board/socionext/developerbox/developerbox.c @@ -125,10 +125,29 @@ int dram_init(void) struct draminfo *synquacer_draminfo = (void *)SQ_DRAMINFO_BASE; struct draminfo_entry *ent = synquacer_draminfo->entry; unsigned long size = 0; - int i; + struct mm_region *mr; + int i, ri; + + if (synquacer_draminfo->nr_regions < 1) { + log_err("Failed to get correct DRAM information\n"); + return -EINVAL; + } - for (i = 0; i < synquacer_draminfo->nr_regions; i++) + for (i = 0; i < synquacer_draminfo->nr_regions; i++) { + if (i >= MAX_DDR_REGIONS) + break; + + ri = DDR_REGION_INDEX(i); + mem_map[ri].phys = ent[i].base; + mem_map[ri].size = ent[i].size; + mem_map[ri].virt = mem_map[ri].phys; size += ent[i].size; + if (i == 0) + continue; + + mr = &mem_map[DDR_REGION_INDEX(0)]; + mem_map[ri].attrs = mr->attrs; + } gd->ram_size = size; gd->ram_base = ent[0].base; @@ -162,43 +181,6 @@ int dram_init_banksize(void) return 0; } -void build_mem_map(void) -{ - struct draminfo *synquacer_draminfo = (void *)SQ_DRAMINFO_BASE; - struct draminfo_entry *ent = synquacer_draminfo->entry; - struct mm_region *mr; - int i, ri; - - if (synquacer_draminfo->nr_regions < 1) { - log_err("Failed to get correct DRAM information\n"); - return; - } - - /* Update memory region maps */ - for (i = 0; i < synquacer_draminfo->nr_regions; i++) { - if (i >= MAX_DDR_REGIONS) - break; - - ri = DDR_REGION_INDEX(i); - mem_map[ri].phys = ent[i].base; - mem_map[ri].size = ent[i].size; - mem_map[ri].virt = mem_map[ri].phys; - if (i == 0) - continue; - - mr = &mem_map[DDR_REGION_INDEX(0)]; - mem_map[ri].attrs = mr->attrs; - } -} - -void enable_caches(void) -{ - build_mem_map(); - - icache_enable(); - dcache_enable(); -} - int print_cpuinfo(void) { printf("CPU: SC2A11:Cortex-A53 MPCore 24cores\n"); diff --git a/board/st/stv0991/Kconfig b/board/st/stv0991/Kconfig deleted file mode 100644 index 007712f..0000000 --- a/board/st/stv0991/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_STV0991 - -config SYS_BOARD - default "stv0991" - -config SYS_VENDOR - default "st" - -config SYS_SOC - default "stv0991" - -config SYS_CONFIG_NAME - default "stv0991" - -endif diff --git a/board/st/stv0991/MAINTAINERS b/board/st/stv0991/MAINTAINERS deleted file mode 100644 index e7a2cca..0000000 --- a/board/st/stv0991/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -STV0991 APPLICATION BOARD -M: Vikas Manocha <vikas.manocha@st.com> -S: Maintained -F: board/st/stv0991/ -F: include/configs/stv0991.h -F: configs/stv0991_defconfig diff --git a/board/st/stv0991/Makefile b/board/st/stv0991/Makefile deleted file mode 100644 index 7f6d719..0000000 --- a/board/st/stv0991/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2014, STMicroelectronics - All Rights Reserved -# Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - -obj-y := stv0991.o diff --git a/board/st/stv0991/stv0991.c b/board/st/stv0991/stv0991.c deleted file mode 100644 index 57ca9f6..0000000 --- a/board/st/stv0991/stv0991.c +++ /dev/null @@ -1,119 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2014, STMicroelectronics - All Rights Reserved - * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - */ - -#include <common.h> -#include <bootstage.h> -#include <dm.h> -#include <init.h> -#include <miiphy.h> -#include <net.h> -#include <asm/arch/stv0991_periph.h> -#include <asm/arch/stv0991_defs.h> -#include <asm/arch/hardware.h> -#include <asm/arch/gpio.h> -#include <netdev.h> -#include <asm/global_data.h> -#include <asm/io.h> -#include <dm/platform_data/serial_pl01x.h> - -DECLARE_GLOBAL_DATA_PTR; - -struct gpio_regs *const gpioa_regs = - (struct gpio_regs *) GPIOA_BASE_ADDR; - -#ifndef CONFIG_OF_CONTROL -static const struct pl01x_serial_plat serial_plat = { - .base = 0x80406000, - .type = TYPE_PL011, - .clock = 2700 * 1000, -}; - -U_BOOT_DRVINFO(stv09911_serials) = { - .name = "serial_pl01x", - .plat = &serial_plat, -}; -#endif - -#if CONFIG_IS_ENABLED(BOOTSTAGE) -void show_boot_progress(int progress) -{ - printf("%i\n", progress); -} -#endif - -void enable_eth_phy(void) -{ - /* Set GPIOA_06 pad HIGH (Appli board)*/ - writel(readl(&gpioa_regs->dir) | 0x40, &gpioa_regs->dir); - writel(readl(&gpioa_regs->data) | 0x40, &gpioa_regs->data); -} -int board_eth_enable(void) -{ - stv0991_pinmux_config(ETH_GPIOB_10_31_C_0_4); - clock_setup(ETH_CLOCK_CFG); - enable_eth_phy(); - return 0; -} - -int board_qspi_enable(void) -{ - stv0991_pinmux_config(QSPI_CS_CLK_PAD); - clock_setup(QSPI_CLOCK_CFG); - return 0; -} - -/* - * Miscellaneous platform dependent initialisations - */ -int board_init(void) -{ - board_eth_enable(); - board_qspi_enable(); - return 0; -} - -int board_uart_init(void) -{ - stv0991_pinmux_config(UART_GPIOC_30_31); - clock_setup(UART_CLOCK_CFG); - return 0; -} - -#ifdef CONFIG_BOARD_EARLY_INIT_F -int board_early_init_f(void) -{ - board_uart_init(); - return 0; -} -#endif - -int dram_init(void) -{ - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -int dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(struct bd_info *bis) -{ - int ret = 0; - -#if defined(CONFIG_ETH_DESIGNWARE) - u32 interface = PHY_INTERFACE_MODE_MII; - if (designware_initialize(GMAC_BASE_ADDR, interface) >= 0) - ret++; -#endif - return ret; -} -#endif diff --git a/board/theobroma-systems/lion_rk3368/Kconfig b/board/theobroma-systems/lion_rk3368/Kconfig index fddbf82..537a2e7 100644 --- a/board/theobroma-systems/lion_rk3368/Kconfig +++ b/board/theobroma-systems/lion_rk3368/Kconfig @@ -9,9 +9,6 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "lion_rk3368" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - config ENV_SIZE default 0x2000 diff --git a/board/turing/turing-rk1-rk3588/Kconfig b/board/turing/turing-rk1-rk3588/Kconfig index 4c6cd6a..0def6e0 100644 --- a/board/turing/turing-rk1-rk3588/Kconfig +++ b/board/turing/turing-rk1-rk3588/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "turing-rk1-rk3588" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/board/vamrs/rock960_rk3399/Kconfig b/board/vamrs/rock960_rk3399/Kconfig index cacc53f..0c052c6 100644 --- a/board/vamrs/rock960_rk3399/Kconfig +++ b/board/vamrs/rock960_rk3399/Kconfig @@ -9,7 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "rock960_rk3399" -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - endif diff --git a/boot/image-fdt.c b/boot/image-fdt.c index 75bdd55..5e4aa9d 100644 --- a/boot/image-fdt.c +++ b/boot/image-fdt.c @@ -217,14 +217,14 @@ int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size) if (start + size < low) continue; - usable = min(size, (u64)mapsize); + usable = min(start + size, (u64)(low + mapsize)); /* * At least part of this DRAM bank is usable, try * using it for LMB allocation. */ of_start = map_sysmem((ulong)lmb_alloc_base(lmb, - of_len, 0x1000, start + usable), of_len); + of_len, 0x1000, usable), of_len); /* Allocation succeeded, use this block. */ if (of_start != NULL) break; diff --git a/cmd/Kconfig b/cmd/Kconfig index 102f62a..61e280f 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -189,6 +189,17 @@ config CMD_HISTORY Show the command-line history, i.e. a list of commands that are in the history buffer. +config CMD_HISTORY_USE_CALLOC + bool "dynamically allocate memory" + default y + depends on CMD_HISTORY + help + Saying Y to this will use calloc to get the space for history + storing. Otherwise the history buffer will be an uninitialized + static array directly, without the memory allocation, and it is + writable after relocation to RAM. If u-boot is running from ROM + all the time or unsure, say Y to this. + config CMD_LICENSE bool "license" select BUILD_BIN2C @@ -479,6 +490,17 @@ config CMD_ELF help Boot an ELF/vxWorks image from the memory. +config CMD_ELF_FDT_SETUP + bool "Flattened Device Tree setup in bootelf cmd" + default n + depends on CMD_ELF + select LIB_LIBFDT + select LMB + help + Do FDT setup in bootelf command optionally by param -d, which + allows to bring additional system info (e.g. /memory node) to + the Operating System or application. + config CMD_FDT bool "Flattened Device Tree utility commands" default y @@ -38,6 +38,10 @@ static unsigned long do_bootelf_exec(ulong (*entry)(int, char * const[]), /* Interpreter command to boot an arbitrary ELF image from memory */ int do_bootelf(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { +#if CONFIG_IS_ENABLED(CMD_ELF_FDT_SETUP) + struct bootm_headers img = {0}; + unsigned long fdt_addr = 0; /* Address of the FDT */ +#endif unsigned long addr; /* Address of the ELF image */ unsigned long rc; /* Return value from user code */ char *sload = NULL; @@ -46,13 +50,25 @@ int do_bootelf(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) /* Consume 'bootelf' */ argc--; argv++; - /* Check for flag. */ + /* Check for [-p|-s] flag. */ if (argc >= 1 && (argv[0][0] == '-' && \ (argv[0][1] == 'p' || argv[0][1] == 's'))) { sload = argv[0]; /* Consume flag. */ argc--; argv++; } + +#if CONFIG_IS_ENABLED(CMD_ELF_FDT_SETUP) + /* Check for [-d fdt_addr_r] option. */ + if ((argc >= 2) && (argv[0][0] == '-') && (argv[0][1] == 'd')) { + if (strict_strtoul(argv[1], 16, &fdt_addr) != 0) + return CMD_RET_USAGE; + /* Consume option. */ + argc -= 2; + argv += 2; + } +#endif + /* Check for address. */ if (argc >= 1 && strict_strtoul(argv[0], 16, &addr) != -EINVAL) { /* Consume address */ @@ -68,6 +84,16 @@ int do_bootelf(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) else addr = load_elf_image_shdr(addr); +#if CONFIG_IS_ENABLED(CMD_ELF_FDT_SETUP) + if (fdt_addr) { + printf("## Setting up FDT at 0x%08lx ...\n", fdt_addr); + flush(); + + if (image_setup_libfdt(&img, (void *)fdt_addr, NULL)) + return 1; + } +#endif + if (!env_get_autostart()) return rcode; @@ -298,9 +324,16 @@ int do_bootvx(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) U_BOOT_CMD( bootelf, CONFIG_SYS_MAXARGS, 0, do_bootelf, "Boot from an ELF image in memory", - "[-p|-s] [address]\n" + "[-p|-s] " +#if CONFIG_IS_ENABLED(CMD_ELF_FDT_SETUP) + "[-d fdt_addr_r] " +#endif + "[address]\n" "\t- load ELF image at [address] via program headers (-p)\n" - "\t or via section headers (-s)" + "\t or via section headers (-s)\n" +#if CONFIG_IS_ENABLED(CMD_ELF_FDT_SETUP) + "\t- setup FDT image at [fdt_addr_r] (-d)" +#endif ); U_BOOT_CMD( @@ -19,6 +19,22 @@ static int do_rng(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) struct udevice *dev; int ret = CMD_RET_SUCCESS; + if (argc == 2 && !strcmp(argv[1], "list")) { + int idx = 0; + + uclass_foreach_dev_probe(UCLASS_RNG, dev) { + idx++; + printf("RNG #%d - %s\n", dev->seq_, dev->name); + } + + if (!idx) { + log_err("No RNG device\n"); + return CMD_RET_FAILURE; + } + + return CMD_RET_SUCCESS; + } + switch (argc) { case 1: devnum = 0; @@ -56,12 +72,9 @@ static int do_rng(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) return ret; } -U_BOOT_LONGHELP(rng, - "[dev [n]]\n" - " - print n random bytes(max 64) read from dev\n"); - U_BOOT_CMD( rng, 3, 0, do_rng, "print bytes from the hardware random number generator", - rng_help_text + "list - list all the probed rng devices\n" + "rng [dev] [n] - print n random bytes(max 64) read from dev\n" ); diff --git a/common/cli_readline.c b/common/cli_readline.c index 2507be2..cf4339d 100644 --- a/common/cli_readline.c +++ b/common/cli_readline.c @@ -86,6 +86,9 @@ static int hist_add_idx; static int hist_cur = -1; static unsigned hist_num; +#ifndef CONFIG_CMD_HISTORY_USE_CALLOC +static char hist_data[HIST_MAX][HIST_SIZE + 1]; +#endif static char *hist_list[HIST_MAX]; #define add_idx_minus_one() ((hist_add_idx == 0) ? hist_max : hist_add_idx-1) @@ -100,20 +103,26 @@ static void getcmd_putchars(int count, int ch) static int hist_init(void) { - unsigned char *hist; int i; - hist_max = 0; - hist_add_idx = 0; - hist_cur = -1; - hist_num = 0; - - hist = calloc(HIST_MAX, HIST_SIZE + 1); +#ifndef CONFIG_CMD_HISTORY_USE_CALLOC + for (i = 0; i < HIST_MAX; i++) { + hist_list[i] = hist_data[i]; + hist_list[i][0] = '\0'; + } +#else + unsigned char *hist = calloc(HIST_MAX, HIST_SIZE + 1); if (!hist) - return -ENOMEM; + panic("%s: calloc: out of memory!\n", __func__); for (i = 0; i < HIST_MAX; i++) hist_list[i] = hist + (i * (HIST_SIZE + 1)); +#endif + + hist_max = 0; + hist_add_idx = 0; + hist_cur = -1; + hist_num = 0; return 0; } @@ -643,10 +652,15 @@ int cli_readline_into_buffer(const char *const prompt, char *buffer, static int initted; /* - * History uses a global array which is not - * writable until after relocation to RAM. - * Revert to non-history version if still - * running from flash. + * Say N to CMD_HISTORY_USE_CALLOC will skip runtime + * allocation for the history buffer and directly + * use an uninitialized static array as the buffer. + * Doing this might have better performance and not + * increase the binary file's size, as it only marks + * the size. However, the array is only writable after + * relocation to RAM. If u-boot is running from ROM + * all the time, consider say Y to CMD_HISTORY_USE_CALLOC + * or disable CMD_HISTORY. */ if (IS_ENABLED(CONFIG_CMDLINE_EDITING) && (gd->flags & GD_FLG_RELOC)) { if (!initted) { diff --git a/configs/am64x_evm_a53_defconfig b/configs/am64x_evm_a53_defconfig index ad5472c..b7057be 100644 --- a/configs/am64x_evm_a53_defconfig +++ b/configs/am64x_evm_a53_defconfig @@ -16,7 +16,7 @@ CONFIG_SF_DEFAULT_SPEED=25000000 CONFIG_ENV_SIZE=0x20000 CONFIG_DM_GPIO=y CONFIG_SPL_DM_SPI=y -CONFIG_DEFAULT_DEVICE_TREE="k3-am642-evm" +CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am642-evm" CONFIG_SPL_TEXT_BASE=0x80080000 CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y @@ -74,7 +74,7 @@ CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y -CONFIG_OF_LIST="k3-am642-evm k3-am642-sk" +CONFIG_OF_LIST="ti/k3-am642-evm ti/k3-am642-sk" CONFIG_MULTI_DTB_FIT=y CONFIG_SPL_MULTI_DTB_FIT=y CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y @@ -170,3 +170,4 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_FUNCTION_MASS_STORAGE=y CONFIG_SPL_DFU=y CONFIG_FS_FAT_MAX_CLUSTSIZE=16384 +CONFIG_OF_UPSTREAM=y diff --git a/configs/stv0991_defconfig b/configs/stv0991_defconfig deleted file mode 100644 index e70db42..0000000 --- a/configs/stv0991_defconfig +++ /dev/null @@ -1,44 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_TARGET_STV0991=y -CONFIG_TEXT_BASE=0x00010000 -CONFIG_SYS_MALLOC_LEN=0x14000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x10000 -CONFIG_ENV_OFFSET=0x30000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="stv0991" -CONFIG_SYS_LOAD_ADDR=0x0 -CONFIG_ENV_ADDR=0x188000 -CONFIG_SYS_MEMTEST_START=0x00000000 -CONFIG_SYS_MEMTEST_END=0x00100000 -CONFIG_BOOTDELAY=3 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="go 0x40040000" -CONFIG_SYS_PBSIZE=1050 -# CONFIG_DISPLAY_CPUINFO is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOARD_EARLY_INIT_F=y -# CONFIG_AUTO_COMPLETE is not set -CONFIG_SYS_PROMPT="STV0991> " -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_SPI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_PING=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -# CONFIG_MMC is not set -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ8XXX=y -CONFIG_PHY_RESET_DELAY=10000 -CONFIG_ETH_DESIGNWARE=y -CONFIG_DW_ALTDESCRIPTOR=y -CONFIG_MII=y -CONFIG_CADENCE_QSPI=y -CONFIG_HAS_CQSPI_REF_CLK=y -CONFIG_CQSPI_REF_CLK=3000000 diff --git a/doc/usage/cmd/rng.rst b/doc/usage/cmd/rng.rst index 274e4d8..4a61e33 100644 --- a/doc/usage/cmd/rng.rst +++ b/doc/usage/cmd/rng.rst @@ -11,16 +11,22 @@ Synopsis :: - rng [devnum [n]] + rng list + rng [dev] [n] -Description ------------ +rng list +-------- + +List all the probed rng devices. + +rng [dev] [n] +------------- The *rng* command reads the random number generator(RNG) device and prints the random bytes read on the console. A maximum of 64 bytes can be read in one invocation of the command. -devnum +dev The RNG device from which the random bytes are to be read. Defaults to 0. diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci.c index c6b9efa..03544d7 100644 --- a/drivers/firmware/psci.c +++ b/drivers/firmware/psci.c @@ -135,10 +135,13 @@ static int bind_smccc_features(struct udevice *dev, int psci_method) PSCI_VERSION_MAJOR(psci_0_2_get_version()) == 0) return 0; - if (request_psci_features(ARM_SMCCC_ARCH_FEATURES) == + if (request_psci_features(ARM_SMCCC_VERSION) == PSCI_RET_NOT_SUPPORTED) return 0; + if (invoke_psci_fn(ARM_SMCCC_VERSION, 0, 0, 0) < ARM_SMCCC_VERSION_1_1) + return 0; + if (psci_method == PSCI_METHOD_HVC) pdata->invoke_fn = smccc_invoke_hvc; else diff --git a/drivers/rng/smccc_trng.c b/drivers/rng/smccc_trng.c index 5bb7ebe..f59b806 100644 --- a/drivers/rng/smccc_trng.c +++ b/drivers/rng/smccc_trng.c @@ -165,7 +165,7 @@ static int smccc_trng_probe(struct udevice *dev) struct smccc_trng_priv *priv = dev_get_priv(dev); struct arm_smccc_res res; - if (!(smccc_trng_is_supported(smccc->invoke_fn))) + if (!smccc || !(smccc_trng_is_supported(smccc->invoke_fn))) return -ENODEV; /* At least one of 64bit and 32bit interfaces is available */ diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h deleted file mode 100644 index 7eadb6d..0000000 --- a/include/configs/stv0991.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014, STMicroelectronics - All Rights Reserved - * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. - */ - -#ifndef __CONFIG_STV0991_H -#define __CONFIG_STV0991_H -#define CFG_SYS_EXCEPTION_VECTORS_HIGH - -/* ram memory-related information */ -#define PHYS_SDRAM_1 0x00000000 -#define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define PHYS_SDRAM_1_SIZE 0x00198000 - -/* user interface */ - -/* MISC */ -#define CFG_SYS_INIT_RAM_SIZE 0x8000 -#define CFG_SYS_INIT_RAM_ADDR 0x00190000 -/* U-Boot Load Address */ - -/* Misc configuration */ - -#endif /* __CONFIG_H */ diff --git a/include/linux/arm-smccc.h b/include/linux/arm-smccc.h index f44e9e8..da3d29a 100644 --- a/include/linux/arm-smccc.h +++ b/include/linux/arm-smccc.h @@ -55,8 +55,14 @@ #define ARM_SMCCC_QUIRK_NONE 0 #define ARM_SMCCC_QUIRK_QCOM_A6 1 /* Save/restore register a6 */ +#define ARM_SMCCC_VERSION 0x80000000 #define ARM_SMCCC_ARCH_FEATURES 0x80000001 +#define ARM_SMCCC_VERSION_1_0 0x10000 +#define ARM_SMCCC_VERSION_1_1 0x10001 +#define ARM_SMCCC_VERSION_1_2 0x10002 +#define ARM_SMCCC_VERSION_1_3 0x10003 + #define ARM_SMCCC_RET_NOT_SUPPORTED ((unsigned long)-1) #ifndef __ASSEMBLY__ diff --git a/lib/initcall.c b/lib/initcall.c index ce317af..c8e2b0f 100644 --- a/lib/initcall.c +++ b/lib/initcall.c @@ -55,7 +55,7 @@ int initcall_run_list(const init_fnc_t init_sequence[]) init_fnc_t func; int ret = 0; - for (ptr = init_sequence; func = *ptr, !ret && func; ptr++) { + for (ptr = init_sequence; func = *ptr, func; ptr++) { type = initcall_is_event(func); if (type) { @@ -71,6 +71,8 @@ int initcall_run_list(const init_fnc_t init_sequence[]) } ret = type ? event_notify_null(type) : func(); + if (ret) + break; } if (ret) { diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 5ce5845..079add4 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -93,7 +93,7 @@ endif endif %_defconfig: $(obj)/conf - $(Q)$(CPP) -nostdinc -I $(srctree) -undef -x assembler-with-cpp $(srctree)/arch/$(SRCARCH)/configs/$@ -o generated_defconfig + $(Q)$(CPP) -nostdinc -P -I $(srctree) -undef -x assembler-with-cpp $(srctree)/arch/$(SRCARCH)/configs/$@ -o generated_defconfig $(Q)$< $(silent) --defconfig=generated_defconfig $(Kconfig) # Added for U-Boot (backward compatibility) |