aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRobert Marko <robert.marko@sartura.hr>2023-11-29 11:11:08 +0100
committerStefan Roese <sr@denx.de>2024-01-10 09:38:55 +0100
commit46471e6c1d58442140259f7e44a5c3e0d6e02351 (patch)
treee28cbd416586f17eb023c9d126c7b9091dceb164
parentfde58124c3831cce0e046e0ec7cb4222d72c4fa7 (diff)
downloadu-boot-46471e6c1d58442140259f7e44a5c3e0d6e02351.zip
u-boot-46471e6c1d58442140259f7e44a5c3e0d6e02351.tar.gz
u-boot-46471e6c1d58442140259f7e44a5c3e0d6e02351.tar.bz2
arm: mvebu: eDPU: support new board revision
There is a new eDPU revision that uses Marvell 88E6361 switch onboard. We can rely on detecting the switch to enable and fixup the Linux DTS so a single DTS can be used. There is currently no support for the 88E6361 switch and thus no working networking in U-Boot, so we disable both ports. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
-rw-r--r--arch/arm/dts/armada-3720-eDPU-u-boot.dtsi13
-rw-r--r--arch/arm/dts/armada-3720-eDPU.dts47
-rw-r--r--board/Marvell/mvebu_armada-37xx/board.c128
-rw-r--r--configs/eDPU_defconfig1
4 files changed, 184 insertions, 5 deletions
diff --git a/arch/arm/dts/armada-3720-eDPU-u-boot.dtsi b/arch/arm/dts/armada-3720-eDPU-u-boot.dtsi
index cb02b70..c3d450d 100644
--- a/arch/arm/dts/armada-3720-eDPU-u-boot.dtsi
+++ b/arch/arm/dts/armada-3720-eDPU-u-boot.dtsi
@@ -32,14 +32,17 @@
bootph-all;
};
-&eth0 {
- /* G.hn does not work without additional configuration */
- status = "disabled";
-};
-
&eth1 {
fixed-link {
speed = <1000>;
full-duplex;
};
};
+
+/*
+ * eDPU v2 has a MV88E6361 switch on the MDIO bus and U-boot is used
+ * to patch the Linux DTS if its found so enable MDIO by default.
+ */
+&mdio {
+ status = "okay";
+};
diff --git a/arch/arm/dts/armada-3720-eDPU.dts b/arch/arm/dts/armada-3720-eDPU.dts
index 57fc698..d6d37a1 100644
--- a/arch/arm/dts/armada-3720-eDPU.dts
+++ b/arch/arm/dts/armada-3720-eDPU.dts
@@ -12,3 +12,50 @@
&eth0 {
phy-mode = "2500base-x";
};
+
+/*
+ * External MV88E6361 switch is only available on v2 of the board.
+ * U-Boot will enable the MDIO bus and switch nodes.
+ */
+&mdio {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&smi_pins>;
+
+ /* Actual device is MV88E6361 */
+ switch: switch@0 {
+ compatible = "marvell,mv88e6190";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ ethernet = <&eth0>;
+ };
+
+ port@9 {
+ reg = <9>;
+ label = "downlink";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ };
+
+ port@a {
+ reg = <10>;
+ label = "uplink";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ sfp = <&sfp_eth1>;
+ };
+ };
+ };
+};
diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c
index f532486..1685b12 100644
--- a/board/Marvell/mvebu_armada-37xx/board.c
+++ b/board/Marvell/mvebu_armada-37xx/board.c
@@ -14,6 +14,7 @@
#include <mmc.h>
#include <miiphy.h>
#include <phy.h>
+#include <fdt_support.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
@@ -50,6 +51,7 @@ DECLARE_GLOBAL_DATA_PTR;
/* Single-chip mode */
/* Switch Port Registers */
#define MVEBU_SW_LINK_CTRL_REG (1)
+#define MVEBU_SW_PORT_SWITCH_ID (3)
#define MVEBU_SW_PORT_CTRL_REG (4)
#define MVEBU_SW_PORT_BASE_VLAN (6)
@@ -57,6 +59,8 @@ DECLARE_GLOBAL_DATA_PTR;
#define MVEBU_G2_SMI_PHY_CMD_REG (24)
#define MVEBU_G2_SMI_PHY_DATA_REG (25)
+#define SWITCH_88E6361_PRODUCT_NUMBER 0x2610
+
/*
* Memory Controller Registers
*
@@ -73,6 +77,30 @@ DECLARE_GLOBAL_DATA_PTR;
#define A3700_MC_CTRL2_SDRAM_TYPE_DDR3 2
#define A3700_MC_CTRL2_SDRAM_TYPE_DDR4 3
+static bool is_edpu_plus(void)
+{
+ struct udevice *bus;
+ ofnode node;
+ int val;
+
+ if (!CONFIG_IS_ENABLED(DM_MDIO))
+ return false;
+
+ node = ofnode_by_compatible(ofnode_null(), "marvell,orion-mdio");
+ if (!ofnode_valid(node) ||
+ uclass_get_device_by_ofnode(UCLASS_MDIO, node, &bus) ||
+ device_probe(bus)) {
+ printf("Cannot find MDIO bus\n");
+ return -ENODEV;
+ }
+
+ val = dm_mdio_read(bus, 0x0, MDIO_DEVAD_NONE, MVEBU_SW_PORT_SWITCH_ID);
+ if (val == SWITCH_88E6361_PRODUCT_NUMBER)
+ return true;
+ else
+ return false;
+}
+
int board_early_init_f(void)
{
return 0;
@@ -357,6 +385,41 @@ static int espressobin_last_stage_init(void)
return 0;
}
+static int edpu_plus_last_stage_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ if (is_edpu_plus()) {
+ ret = uclass_get_device_by_name(UCLASS_ETH,
+ "ethernet@40000",
+ &dev);
+ if (!ret) {
+ device_remove(dev, DM_REMOVE_NORMAL);
+ device_unbind(dev);
+ }
+
+ /* Currently no networking support on the eDPU+ board */
+ ret = uclass_get_device_by_name(UCLASS_ETH,
+ "ethernet@30000",
+ &dev);
+ if (!ret) {
+ device_remove(dev, DM_REMOVE_NORMAL);
+ device_unbind(dev);
+ }
+ } else {
+ ret = uclass_get_device_by_name(UCLASS_ETH,
+ "ethernet@30000",
+ &dev);
+ if (!ret) {
+ device_remove(dev, DM_REMOVE_NORMAL);
+ device_unbind(dev);
+ }
+ }
+
+ return 0;
+}
+
/* Bring-up board-specific network stuff */
static int last_stage_init(void)
{
@@ -364,6 +427,9 @@ static int last_stage_init(void)
if (of_machine_is_compatible("globalscale,espressobin"))
return espressobin_last_stage_init();
+ if (of_machine_is_compatible("methode,edpu"))
+ return edpu_plus_last_stage_init();
+
return 0;
}
EVENT_SPY_SIMPLE(EVT_LAST_STAGE_INIT, last_stage_init);
@@ -465,12 +531,74 @@ static int espressobin_fdt_setup(void *blob)
return 0;
}
+static int edpu_plus_fdt_setup(void *blob)
+{
+ const char *ports[] = { "downlink", "uplink" };
+ uint8_t mac[ETH_ALEN];
+ const char *path;
+ int i, ret;
+
+ if (is_edpu_plus()) {
+ ret = fdt_set_status_by_compatible(blob,
+ "marvell,orion-mdio",
+ FDT_STATUS_OKAY);
+ if (ret)
+ printf("Failed to enable MDIO!\n");
+
+ ret = fdt_set_status_by_alias(blob,
+ "ethernet1",
+ FDT_STATUS_DISABLED);
+ if (ret)
+ printf("Failed to disable ethernet1!\n");
+
+ path = fdt_get_alias(blob, "ethernet0");
+ if (path)
+ do_fixup_by_path_string(blob, path, "phy-mode", "2500base-x");
+ else
+ printf("Failed to update ethernet0 phy-mode to 2500base-x!\n");
+
+ ret = fdt_set_status_by_compatible(blob,
+ "marvell,mv88e6190",
+ FDT_STATUS_OKAY);
+ if (ret)
+ printf("Failed to enable MV88E6361!\n");
+
+ /*
+ * MAC-s for Uplink and Downlink ports are stored under
+ * non standard variable names, so lets manually fixup the
+ * switch port nodes to have the desired MAC-s.
+ */
+ for (i = 0; i < 2; i++) {
+ if (eth_env_get_enetaddr(ports[i], mac)) {
+ do_fixup_by_prop(blob,
+ "label",
+ ports[i],
+ strlen(ports[i]) + 1,
+ "mac-address",
+ mac, ARP_HLEN, 1);
+
+ do_fixup_by_prop(blob,
+ "label",
+ ports[i],
+ strlen(ports[i]) + 1,
+ "local-mac-address",
+ mac, ARP_HLEN, 1);
+ }
+ }
+ }
+
+ return 0;
+}
+
int ft_board_setup(void *blob, struct bd_info *bd)
{
#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
if (of_machine_is_compatible("globalscale,espressobin"))
return espressobin_fdt_setup(blob);
#endif
+ if (of_machine_is_compatible("methode,edpu"))
+ return edpu_plus_fdt_setup(blob);
+
return 0;
}
#endif
diff --git a/configs/eDPU_defconfig b/configs/eDPU_defconfig
index 0b33ff2..545fd43 100644
--- a/configs/eDPU_defconfig
+++ b/configs/eDPU_defconfig
@@ -17,6 +17,7 @@ CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
CONFIG_SYS_PBSIZE=1048
# CONFIG_DISPLAY_CPUINFO is not set