diff options
author | Tom Rini <trini@konsulko.com> | 2023-06-09 10:30:26 -0400 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2023-06-09 10:30:26 -0400 |
commit | ac7ca692092a100e97a79531d2f707f1ca7faaaa (patch) | |
tree | d5cb497991cdf09e1ebd3407f1b367050c71e1e8 | |
parent | 3aa4fb12f4abd31bce7fe6294dd47fd0966a791a (diff) | |
parent | ed2f65f0105dacb98e5c4d2b435dd009de06c2d1 (diff) | |
download | u-boot-ac7ca692092a100e97a79531d2f707f1ca7faaaa.zip u-boot-ac7ca692092a100e97a79531d2f707f1ca7faaaa.tar.gz u-boot-ac7ca692092a100e97a79531d2f707f1ca7faaaa.tar.bz2 |
Merge branch 'next_soc/v3x' of https://source.denx.de/u-boot/custodians/u-boot-sh into nextWIP/09Jun2023-next
32 files changed, 1618 insertions, 244 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 35f50f4..4b19a93 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1050,7 +1050,9 @@ dtb-$(CONFIG_RCAR_GEN3) += \ r8a77965-ulcb-u-boot.dtb \ r8a77965-salvator-x-u-boot.dtb \ r8a77970-eagle-u-boot.dtb \ + r8a77970-v3msk-u-boot.dtb \ r8a77980-condor-u-boot.dtb \ + r8a77980-v3hsk-u-boot.dtb \ r8a77990-ebisu-u-boot.dtb \ r8a77995-draak-u-boot.dtb diff --git a/arch/arm/dts/r8a77970-v3msk-u-boot.dts b/arch/arm/dts/r8a77970-v3msk-u-boot.dts new file mode 100644 index 0000000..6ee06d7 --- /dev/null +++ b/arch/arm/dts/r8a77970-v3msk-u-boot.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source extras for U-Boot for the V3MSK board + * + * Copyright (C) 2019 Cogent Embedded, Inc. + */ + +#include "r8a77970-v3msk.dts" +#include "r8a77970-u-boot.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + spi0 = &rpc; + }; + + cpld { + compatible = "renesas,v3msk-cpld"; + status = "okay"; + gpio-mdc = <&gpio1 21 0>; + gpio-mosi = <&gpio1 22 0>; + gpio-miso = <&gpio1 23 0>; + gpio-enablez = <&gpio1 19 0>; + /* Disable V3MSK Videobox Mini CANFD PHY */ + gpios = <&gpio0 12 0>, <&gpio0 14 0>; + }; +}; + +&avb { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + +}; + +&phy0 { + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; +}; + +&pfc { + avb0_pins: avb { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; + function = "avb0"; + }; + }; +}; + +&rpc { + num-cs = <1>; + status = "okay"; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + + flash0: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "s25fs512s", "spi-flash", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + reg = <0>; + status = "okay"; + }; +}; diff --git a/arch/arm/dts/r8a77970-v3msk.dts b/arch/arm/dts/r8a77970-v3msk.dts new file mode 100644 index 0000000..c2b65f8 --- /dev/null +++ b/arch/arm/dts/r8a77970-v3msk.dts @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the V3M Starter Kit board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a77970.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Renesas V3M Starter Kit board"; + compatible = "renesas,v3msk", "renesas,r8a77970"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + serial0 = &scif0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&vcc_d3_3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + osc5_clk: osc5-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + vcc_d1_8v: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VCC_D1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_d3_3v: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_vddq_vin0: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "VCC_VDDQ_VIN0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + renesas,no-ether-link; + phy-handle = <&phy0>; + rx-internal-delay-ps = <1800>; + tx-internal-delay-ps = <2000>; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&osc5_clk>; + clock-names = "du.0", "dclkin.0"; + status = "okay"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + hdmi@39{ + compatible = "adi,adv7511w"; + #sound-dai-cells = <0>; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&vcc_d1_8v>; + dvdd-supply = <&vcc_d1_8v>; + pvdd-supply = <&vcc_d1_8v>; + bgvdd-supply = <&vcc_d1_8v>; + dvdd-3v-supply = <&vcc_d3_3v>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_d3_3v>; + vqmmc-supply = <&vcc_vddq_vin0>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&pfc { + avb_pins: avb0 { + groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; + function = "avb0"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + mmc_pins: mmc_3_3v { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <3300>; + }; + + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; +}; + +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + cr7@40000 { + reg = <0x00040000 0x080000>; + read-only; + }; + cert_header_sa3@c0000 { + reg = <0x000c0000 0x080000>; + read-only; + }; + bl2@140000 { + reg = <0x00140000 0x040000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x460000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x0c0000>; + read-only; + }; + uboot-env@700000 { + reg = <0x00700000 0x040000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/dts/r8a77980-v3hsk-u-boot.dts b/arch/arm/dts/r8a77980-v3hsk-u-boot.dts new file mode 100644 index 0000000..d083df6 --- /dev/null +++ b/arch/arm/dts/r8a77980-v3hsk-u-boot.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source extras for U-Boot for the Eagle board + * + * Copyright (C) 2019 Cogent Embedded, Inc. + */ + +#include "r8a77980-v3hsk.dts" +#include "r8a77980-u-boot.dtsi" + +/ { + aliases { + spi0 = &rpc; + }; +}; + +&rpc { + num-cs = <1>; + status = "okay"; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + + flash0: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "s25fs512s", "spi-flash", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + reg = <0>; + status = "okay"; + }; +}; + +&i2c0 { + cpld { + compatible = "renesas,v3hsk-cpld"; + reg = <0x70>; + u-boot,i2c-offset-len = <2>; + }; +}; diff --git a/arch/arm/dts/r8a77980-v3hsk.dts b/arch/arm/dts/r8a77980-v3hsk.dts new file mode 100644 index 0000000..d168b0e --- /dev/null +++ b/arch/arm/dts/r8a77980-v3hsk.dts @@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the V3H Starter Kit board + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a77980.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Renesas V3H Starter Kit board"; + compatible = "renesas,v3hsk", "renesas,r8a77980"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + serial0 = &scif0; + ethernet0 = &gether; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&vcc3v3_d5>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0 0x48000000 0 0x78000000>; + }; + + osc1_clk: osc1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + vcc1v8_d4: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8_D4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc3v3_d5: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_D5"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&osc1_clk>; + clock-names = "du.0", "dclkin.0"; + status = "okay"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&gether { + pinctrl-0 = <&gether_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii"; + phy-handle = <&phy0>; + renesas,no-ether-link; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + hdmi@39 { + compatible = "adi,adv7511w"; + #sound-dai-cells = <0>; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&vcc1v8_d4>; + dvdd-supply = <&vcc1v8_d4>; + pvdd-supply = <&vcc1v8_d4>; + bgvdd-supply = <&vcc1v8_d4>; + dvdd-3v-supply = <&vcc3v3_d5>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&pfc { + gether_pins: gether { + groups = "gether_mdio_a", "gether_rgmii", + "gether_txcrefclk", "gether_txcrefclk_mega"; + function = "gether"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_b"; + function = "scif_clk"; + }; +}; + +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + cr7@40000 { + reg = <0x00040000 0x080000>; + read-only; + }; + cert_header_sa3@c0000 { + reg = <0x000c0000 0x080000>; + read-only; + }; + bl2@140000 { + reg = <0x00140000 0x040000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x460000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x0c0000>; + read-only; + }; + uboot-env@700000 { + reg = <0x00700000 0x040000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; diff --git a/arch/arm/mach-rmobile/Kconfig.rcar3 b/arch/arm/mach-rmobile/Kconfig.rcar3 index 5f33821..ad35d10 100644 --- a/arch/arm/mach-rmobile/Kconfig.rcar3 +++ b/arch/arm/mach-rmobile/Kconfig.rcar3 @@ -99,6 +99,11 @@ config TARGET_CONDOR help Support for Renesas R-Car Gen3 Condor platform +config TARGET_V3HSK + bool "V3HSK board" + help + Support for Renesas R-Car Gen3 V3HSK platform + config TARGET_DRAAK bool "Draak board" imply R8A77995 @@ -111,6 +116,11 @@ config TARGET_EAGLE help Support for Renesas R-Car Gen3 Eagle platform +config TARGET_V3MSK + bool "V3MSK board" + help + Support for Renesas R-Car Gen3 V3MSK platform + config TARGET_EBISU bool "Ebisu board" imply R8A77990 @@ -166,6 +176,8 @@ source "board/renesas/eagle/Kconfig" source "board/renesas/ebisu/Kconfig" source "board/renesas/salvator-x/Kconfig" source "board/renesas/ulcb/Kconfig" +source "board/renesas/v3hsk/Kconfig" +source "board/renesas/v3msk/Kconfig" source "board/beacon/beacon-rzg2m/Kconfig" source "board/hoperun/hihope-rzg2/Kconfig" source "board/silinux/ek874/Kconfig" diff --git a/board/renesas/condor/Makefile b/board/renesas/condor/Makefile index cf6d566..19e6038 100644 --- a/board/renesas/condor/Makefile +++ b/board/renesas/condor/Makefile @@ -9,5 +9,5 @@ ifdef CONFIG_SPL_BUILD obj-y := ../rcar-common/gen3-spl.o else -obj-y := condor.o ../rcar-common/common.o +obj-y := ../rcar-common/common.o endif diff --git a/board/renesas/condor/condor.c b/board/renesas/condor/condor.c deleted file mode 100644 index 2dd2c15..0000000 --- a/board/renesas/condor/condor.c +++ /dev/null @@ -1,47 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * board/renesas/condor/condor.c - * This file is Condor board support. - * - * Copyright (C) 2019 Marek Vasut <marek.vasut+renesas@gmail.com> - */ - -#include <common.h> -#include <cpu_func.h> -#include <hang.h> -#include <init.h> -#include <asm/global_data.h> -#include <asm/processor.h> -#include <asm/mach-types.h> -#include <asm/io.h> -#include <linux/errno.h> -#include <asm/arch/sys_proto.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - return 0; -} - -#define RST_BASE 0xE6160000 -#define RST_CA57RESCNT (RST_BASE + 0x40) -#define RST_CA53RESCNT (RST_BASE + 0x44) -#define RST_RSTOUTCR (RST_BASE + 0x58) -#define RST_CA57_CODE 0xA5A5000F -#define RST_CA53_CODE 0x5A5A000F - -void reset_cpu(void) -{ - unsigned long midr, cputype; - - asm volatile("mrs %0, midr_el1" : "=r" (midr)); - cputype = (midr >> 4) & 0xfff; - - if (cputype == 0xd03) - writel(RST_CA53_CODE, RST_CA53RESCNT); - else if (cputype == 0xd07) - writel(RST_CA57_CODE, RST_CA57RESCNT); - else - hang(); -} diff --git a/board/renesas/draak/draak.c b/board/renesas/draak/draak.c index 71efeaf..1ed72d3 100644 --- a/board/renesas/draak/draak.c +++ b/board/renesas/draak/draak.c @@ -67,12 +67,3 @@ int board_init(void) return 0; } - -#define RST_BASE 0xE6160000 -#define RST_CA53RESCNT (RST_BASE + 0x44) -#define RST_CA53_CODE 0x5A5A000F - -void reset_cpu(void) -{ - writel(RST_CA53_CODE, RST_CA53RESCNT); -} diff --git a/board/renesas/eagle/Kconfig b/board/renesas/eagle/Kconfig index 1e0710e..4d12843 100644 --- a/board/renesas/eagle/Kconfig +++ b/board/renesas/eagle/Kconfig @@ -10,6 +10,6 @@ config SYS_VENDOR default "renesas" config SYS_CONFIG_NAME - default "eagle" + default "rcar-gen3-common" endif diff --git a/board/renesas/eagle/Makefile b/board/renesas/eagle/Makefile index 062c46b..9fb6a7c 100644 --- a/board/renesas/eagle/Makefile +++ b/board/renesas/eagle/Makefile @@ -9,5 +9,5 @@ ifdef CONFIG_SPL_BUILD obj-y := ../rcar-common/gen3-spl.o else -obj-y := eagle.o ../rcar-common/common.o +obj-y := ../rcar-common/v3-common.o ../rcar-common/common.o endif diff --git a/board/renesas/eagle/eagle.c b/board/renesas/eagle/eagle.c deleted file mode 100644 index 9af935c..0000000 --- a/board/renesas/eagle/eagle.c +++ /dev/null @@ -1,92 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * board/renesas/eagle/eagle.c - * This file is Eagle board support. - * - * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@gmail.com> - */ - -#include <common.h> -#include <clock_legacy.h> -#include <cpu_func.h> -#include <hang.h> -#include <init.h> -#include <malloc.h> -#include <netdev.h> -#include <dm.h> -#include <asm/global_data.h> -#include <dm/platform_data/serial_sh.h> -#include <asm/processor.h> -#include <asm/mach-types.h> -#include <asm/io.h> -#include <linux/errno.h> -#include <asm/arch/sys_proto.h> -#include <asm/gpio.h> -#include <asm/arch/gpio.h> -#include <asm/arch/rmobile.h> -#include <asm/arch/rcar-mstp.h> -#include <asm/arch/sh_sdhi.h> -#include <i2c.h> -#include <mmc.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define CPGWPR 0xE6150900 -#define CPGWPCR 0xE6150904 - -/* PLL */ -#define PLL0CR 0xE61500D8 -#define PLL0_STC_MASK 0x7F000000 -#define PLL0_STC_OFFSET 24 - -#define CLK2MHZ(clk) (clk / 1000 / 1000) -void s_init(void) -{ - struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE; - struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE; - u32 stc; - - /* Watchdog init */ - writel(0xA5A5A500, &rwdt->rwtcsra); - writel(0xA5A5A500, &swdt->swtcsra); - - /* CPU frequency setting. Set to 0.8GHz */ - stc = ((800 / CLK2MHZ(get_board_sys_clk())) - 1) << PLL0_STC_OFFSET; - clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc); -} - -int board_early_init_f(void) -{ - /* Unlock CPG access */ - writel(0xA5A5FFFF, CPGWPR); - writel(0x5A5A0000, CPGWPCR); - - return 0; -} - -int board_init(void) -{ - return 0; -} - -#define RST_BASE 0xE6160000 -#define RST_CA57RESCNT (RST_BASE + 0x40) -#define RST_CA53RESCNT (RST_BASE + 0x44) -#define RST_RSTOUTCR (RST_BASE + 0x58) -#define RST_CA57_CODE 0xA5A5000F -#define RST_CA53_CODE 0x5A5A000F - -void reset_cpu(void) -{ - unsigned long midr, cputype; - - asm volatile("mrs %0, midr_el1" : "=r" (midr)); - cputype = (midr >> 4) & 0xfff; - - if (cputype == 0xd03) - writel(RST_CA53_CODE, RST_CA53RESCNT); - else if (cputype == 0xd07) - writel(RST_CA57_CODE, RST_CA57RESCNT); - else - hang(); -} diff --git a/board/renesas/ebisu/Makefile b/board/renesas/ebisu/Makefile index 1fd9a03..956ce8a 100644 --- a/board/renesas/ebisu/Makefile +++ b/board/renesas/ebisu/Makefile @@ -9,5 +9,5 @@ ifdef CONFIG_SPL_BUILD obj-y := ../rcar-common/gen3-spl.o else -obj-y := ebisu.o ../rcar-common/common.o +obj-y := ../rcar-common/common.o endif diff --git a/board/renesas/ebisu/ebisu.c b/board/renesas/ebisu/ebisu.c deleted file mode 100644 index 9a70192..0000000 --- a/board/renesas/ebisu/ebisu.c +++ /dev/null @@ -1,45 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * board/renesas/ebisu/ebisu.c - * This file is Ebisu board support. - * - * Copyright (C) 2018 Marek Vasut <marek.vasut+renesas@gmail.com> - */ - -#include <common.h> -#include <cpu_func.h> -#include <hang.h> -#include <init.h> -#include <malloc.h> -#include <netdev.h> -#include <dm.h> -#include <asm/global_data.h> -#include <dm/platform_data/serial_sh.h> -#include <asm/processor.h> -#include <asm/mach-types.h> -#include <asm/io.h> -#include <linux/errno.h> -#include <asm/arch/sys_proto.h> -#include <asm/gpio.h> -#include <asm/arch/gpio.h> -#include <asm/arch/rmobile.h> -#include <asm/arch/rcar-mstp.h> -#include <asm/arch/sh_sdhi.h> -#include <i2c.h> -#include <mmc.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - return 0; -} - -#define RST_BASE 0xE6160000 -#define RST_CA53RESCNT (RST_BASE + 0x44) -#define RST_CA53_CODE 0x5A5A000F - -void reset_cpu(void) -{ - writel(RST_CA53_CODE, RST_CA53RESCNT); -} diff --git a/board/renesas/falcon/falcon.c b/board/renesas/falcon/falcon.c index ab7464d..0aa0f1a 100644 --- a/board/renesas/falcon/falcon.c +++ b/board/renesas/falcon/falcon.c @@ -84,8 +84,6 @@ int board_early_init_f(void) } #define RST_BASE 0xE6160000 /* Domain0 */ -#define RST_SRESCR0 (RST_BASE + 0x18) -#define RST_SPRES 0x5AA58000 #define RST_WDTRSTCR (RST_BASE + 0x10) #define RST_RWDT 0xA55A8002 @@ -103,8 +101,3 @@ int board_init(void) return 0; } - -void reset_cpu(void) -{ - writel(RST_SPRES, RST_SRESCR0); -} diff --git a/board/renesas/rcar-common/common.c b/board/renesas/rcar-common/common.c index f38453a..3a0e88b 100644 --- a/board/renesas/rcar-common/common.c +++ b/board/renesas/rcar-common/common.c @@ -10,8 +10,10 @@ #include <common.h> #include <dm.h> #include <fdt_support.h> +#include <hang.h> #include <init.h> #include <asm/global_data.h> +#include <asm/io.h> #include <dm/uclass-internal.h> #include <asm/arch/rmobile.h> #include <linux/libfdt.h> @@ -47,6 +49,46 @@ int dram_init_banksize(void) return 0; } +int __weak board_init(void) +{ + return 0; +} + +#if defined(CONFIG_RCAR_GEN3) +#define RST_BASE 0xE6160000 +#define RST_CA57RESCNT (RST_BASE + 0x40) +#define RST_CA53RESCNT (RST_BASE + 0x44) +#define RST_RSTOUTCR (RST_BASE + 0x58) +#define RST_CA57_CODE 0xA5A5000F +#define RST_CA53_CODE 0x5A5A000F + +void __weak reset_cpu(void) +{ + unsigned long midr, cputype; + + asm volatile("mrs %0, midr_el1" : "=r" (midr)); + cputype = (midr >> 4) & 0xfff; + + if (cputype == 0xd03) + writel(RST_CA53_CODE, RST_CA53RESCNT); + else if (cputype == 0xd07) + writel(RST_CA57_CODE, RST_CA57RESCNT); + else + hang(); +} +#elif defined(CONFIG_RCAR_GEN4) +#define RST_BASE 0xE6160000 /* Domain0 */ +#define RST_SRESCR0 (RST_BASE + 0x18) +#define RST_SPRES 0x5AA58000 + +void __weak reset_cpu(void) +{ + writel(RST_SPRES, RST_SRESCR0); +} +#else +#error Neither CONFIG_RCAR_GEN3 nor CONFIG_RCAR_GEN4 are set +#endif + #if defined(CONFIG_OF_BOARD_SETUP) static int is_mem_overlap(void *blob, int first_mem_node, int curr_mem_node) { diff --git a/board/renesas/rcar-common/v3-common.c b/board/renesas/rcar-common/v3-common.c new file mode 100644 index 0000000..7c6202e --- /dev/null +++ b/board/renesas/rcar-common/v3-common.c @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017-2023 Marek Vasut <marek.vasut+renesas@mailbox.org> + */ + +#include <common.h> +#include <clock_legacy.h> +#include <asm/io.h> + +#define CPGWPR 0xE6150900 +#define CPGWPCR 0xE6150904 + +/* PLL */ +#define PLL0CR 0xE61500D8 +#define PLL0_STC_MASK 0x7F000000 +#define PLL0_STC_OFFSET 24 + +#define CLK2MHZ(clk) (clk / 1000 / 1000) +void s_init(void) +{ + struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE; + struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE; + u32 stc; + + /* Watchdog init */ + writel(0xA5A5A500, &rwdt->rwtcsra); + writel(0xA5A5A500, &swdt->swtcsra); + + /* CPU frequency setting. Set to 0.8GHz */ + stc = ((800 / CLK2MHZ(get_board_sys_clk())) - 1) << PLL0_STC_OFFSET; + clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc); +} + +int board_early_init_f(void) +{ + /* Unlock CPG access */ + writel(0xA5A5FFFF, CPGWPR); + writel(0x5A5A0000, CPGWPCR); + + return 0; +} diff --git a/board/renesas/salvator-x/salvator-x.c b/board/renesas/salvator-x/salvator-x.c index c27eb3f..939b48e 100644 --- a/board/renesas/salvator-x/salvator-x.c +++ b/board/renesas/salvator-x/salvator-x.c @@ -67,21 +67,12 @@ int board_init(void) return 0; } -#define RST_BASE 0xE6160000 -#define RST_CA57RESCNT (RST_BASE + 0x40) -#define RST_CA53RESCNT (RST_BASE + 0x44) -#define RST_RSTOUTCR (RST_BASE + 0x58) -#define RST_CODE 0xA5A5000F - +#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) && defined(CONFIG_SYS_I2C_SH) void reset_cpu(void) { -#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) && defined(CONFIG_SYS_I2C_SH) i2c_reg_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x20, 0x80); -#else - /* only CA57 ? */ - writel(RST_CODE, RST_CA57RESCNT); -#endif } +#endif #ifdef CONFIG_MULTI_DTB_FIT int board_fit_config_name_match(const char *name) diff --git a/board/renesas/spider/spider.c b/board/renesas/spider/spider.c index caf88dc..fd83a72 100644 --- a/board/renesas/spider/spider.c +++ b/board/renesas/spider/spider.c @@ -65,8 +65,3 @@ int board_init(void) return 0; } - -void reset_cpu(void) -{ - writel(RST_SPRES, RST_SRESCR0); -} diff --git a/board/renesas/v3hsk/Kconfig b/board/renesas/v3hsk/Kconfig new file mode 100644 index 0000000..531ceb7 --- /dev/null +++ b/board/renesas/v3hsk/Kconfig @@ -0,0 +1,15 @@ +if TARGET_V3HSK + +config SYS_SOC + default "rmobile" + +config SYS_BOARD + default "v3hsk" + +config SYS_VENDOR + default "renesas" + +config SYS_CONFIG_NAME + default "v3hsk" + +endif diff --git a/board/renesas/v3hsk/Makefile b/board/renesas/v3hsk/Makefile new file mode 100644 index 0000000..a9d597e --- /dev/null +++ b/board/renesas/v3hsk/Makefile @@ -0,0 +1,15 @@ +# +# board/renesas/v3hsk/Makefile +# +# Copyright (C) 2019 Renesas Electronics Corporation +# Copyright (C) 2019 Cogent Embedded, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-y := ../rcar-common/gen3-spl.o +else +obj-y := ../rcar-common/v3-common.o ../rcar-common/common.o +obj-$(CONFIG_SYSRESET) += cpld.o +endif diff --git a/board/renesas/v3hsk/cpld.c b/board/renesas/v3hsk/cpld.c new file mode 100644 index 0000000..6016f6d --- /dev/null +++ b/board/renesas/v3hsk/cpld.c @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * V3HSK board CPLD access support + * + * Copyright (C) 2019 Renesas Electronics Corporation + * Copyright (C) 2019 Cogent Embedded, Inc. + * + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <i2c.h> +#include <linux/err.h> +#include <sysreset.h> +#include <command.h> + +#define CPLD_ADDR_PRODUCT_0 0x0000 /* R */ +#define CPLD_ADDR_PRODUCT_1 0x0001 /* R */ +#define CPLD_ADDR_PRODUCT_2 0x0002 /* R */ +#define CPLD_ADDR_PRODUCT_3 0x0003 /* R */ +#define CPLD_ADDR_CPLD_VERSION_D 0x0004 /* R */ +#define CPLD_ADDR_CPLD_VERSION_M 0x0005 /* R */ +#define CPLD_ADDR_CPLD_VERSION_Y_0 0x0006 /* R */ +#define CPLD_ADDR_CPLD_VERSION_Y_1 0x0007 /* R */ +#define CPLD_ADDR_MODE_SET_0 0x0008 /* R */ +#define CPLD_ADDR_MODE_SET_1 0x0009 /* R */ +#define CPLD_ADDR_MODE_SET_2 0x000A /* R */ +#define CPLD_ADDR_MODE_SET_3 0x000B /* R */ +#define CPLD_ADDR_MODE_SET_4 0x000C /* R */ +#define CPLD_ADDR_MODE_LAST_0 0x0018 /* R */ +#define CPLD_ADDR_MODE_LAST_1 0x0019 /* R */ +#define CPLD_ADDR_MODE_LAST_2 0x001A /* R */ +#define CPLD_ADDR_MODE_LAST_3 0x001B /* R */ +#define CPLD_ADDR_MODE_LAST_4 0x001C /* R */ +#define CPLD_ADDR_DIPSW4 0x0020 /* R */ +#define CPLD_ADDR_DIPSW5 0x0021 /* R */ +#define CPLD_ADDR_RESET 0x0024 /* R/W */ +#define CPLD_ADDR_POWER_CFG 0x0025 /* R/W */ +#define CPLD_ADDR_PERI_CFG_0 0x0030 /* R/W */ +#define CPLD_ADDR_PERI_CFG_1 0x0031 /* R/W */ +#define CPLD_ADDR_PERI_CFG_2 0x0032 /* R/W */ +#define CPLD_ADDR_PERI_CFG_3 0x0033 /* R/W */ +#define CPLD_ADDR_LEDS 0x0034 /* R/W */ +#define CPLD_ADDR_LEDS_CFG 0x0035 /* R/W */ +#define CPLD_ADDR_UART_CFG 0x0036 /* R/W */ +#define CPLD_ADDR_UART_STATUS 0x0037 /* R */ + +#define CPLD_ADDR_PCB_VERSION_0 0x1000 /* R */ +#define CPLD_ADDR_PCB_VERSION_1 0x1001 /* R */ +#define CPLD_ADDR_SOC_VERSION_0 0x1002 /* R */ +#define CPLD_ADDR_SOC_VERSION_1 0x1003 /* R */ +#define CPLD_ADDR_PCB_SN_0 0x1004 /* R */ +#define CPLD_ADDR_PCB_SN_1 0x1005 /* R */ + +static u16 cpld_read(struct udevice *dev, u16 addr) +{ + u8 data[2]; + + /* Random flash reads require 2 reads: first read is unreliable */ + if (addr >= CPLD_ADDR_PCB_VERSION_0) + dm_i2c_read(dev, addr, data, 2); + + /* Only the second byte read is valid */ + dm_i2c_read(dev, addr, data, 2); + return data[1]; +} + +static void cpld_write(struct udevice *dev, u16 addr, u8 data) +{ + dm_i2c_write(dev, addr, &data, 1); +} + +static int do_cpld(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]) +{ + struct udevice *dev; + u16 addr, val; + int ret; + + ret = uclass_get_device_by_driver(UCLASS_SYSRESET, + DM_DRIVER_GET(sysreset_renesas_v3hsk), + &dev); + if (ret) + return ret; + + if (argc == 2 && strcmp(argv[1], "info") == 0) { + printf("Product: 0x%08x\n", + (cpld_read(dev, CPLD_ADDR_PRODUCT_3) << 24) | + (cpld_read(dev, CPLD_ADDR_PRODUCT_2) << 16) | + (cpld_read(dev, CPLD_ADDR_PRODUCT_1) << 8) | + cpld_read(dev, CPLD_ADDR_PRODUCT_0)); + printf("CPLD version: 0x%08x\n", + (cpld_read(dev, CPLD_ADDR_CPLD_VERSION_Y_1) << 24) | + (cpld_read(dev, CPLD_ADDR_CPLD_VERSION_Y_0) << 16) | + (cpld_read(dev, CPLD_ADDR_CPLD_VERSION_M) << 8) | + cpld_read(dev, CPLD_ADDR_CPLD_VERSION_D)); + printf("Mode setting (MD0..26): 0x%08x\n", + (cpld_read(dev, CPLD_ADDR_MODE_LAST_3) << 24) | + (cpld_read(dev, CPLD_ADDR_MODE_LAST_2) << 16) | + (cpld_read(dev, CPLD_ADDR_MODE_LAST_1) << 8) | + cpld_read(dev, CPLD_ADDR_MODE_LAST_0)); + printf("DIPSW (SW4, SW5): 0x%02x, 0x%x\n", + cpld_read(dev, CPLD_ADDR_DIPSW4) ^ 0xff, + (cpld_read(dev, CPLD_ADDR_DIPSW5) ^ 0xff) & 0xf); + printf("Power config: 0x%08x\n", + cpld_read(dev, CPLD_ADDR_POWER_CFG)); + printf("Periferals config: 0x%08x\n", + (cpld_read(dev, CPLD_ADDR_PERI_CFG_3) << 24) | + (cpld_read(dev, CPLD_ADDR_PERI_CFG_2) << 16) | + (cpld_read(dev, CPLD_ADDR_PERI_CFG_1) << 8) | + cpld_read(dev, CPLD_ADDR_PERI_CFG_0)); + printf("PCB version: %d.%d\n", + cpld_read(dev, CPLD_ADDR_PCB_VERSION_1), + cpld_read(dev, CPLD_ADDR_PCB_VERSION_0)); + printf("SOC version: %d.%d\n", + cpld_read(dev, CPLD_ADDR_SOC_VERSION_1), + cpld_read(dev, CPLD_ADDR_SOC_VERSION_0)); + printf("PCB S/N: %d\n", + (cpld_read(dev, CPLD_ADDR_PCB_SN_1) << 8) | + cpld_read(dev, CPLD_ADDR_PCB_SN_0)); + return 0; + } + + if (argc < 3) + return CMD_RET_USAGE; + + addr = simple_strtoul(argv[2], NULL, 16); + if (!(addr >= CPLD_ADDR_PRODUCT_0 && addr <= CPLD_ADDR_UART_STATUS)) { + printf("cpld invalid addr\n"); + return CMD_RET_USAGE; + } + + if (argc == 3 && strcmp(argv[1], "read") == 0) { + printf("0x%x\n", cpld_read(dev, addr)); + } else if (argc == 4 && strcmp(argv[1], "write") == 0) { + val = simple_strtoul(argv[3], NULL, 16); + cpld_write(dev, addr, val); + } + + return 0; +} + +U_BOOT_CMD(cpld, 4, 1, do_cpld, + "CPLD access", + "info\n" + "cpld read addr\n" + "cpld write addr val\n" +); + +static int renesas_v3hsk_sysreset_request(struct udevice *dev, enum sysreset_t type) +{ + cpld_write(dev, CPLD_ADDR_RESET, 1); + + return -EINPROGRESS; +} + +static int renesas_v3hsk_sysreset_probe(struct udevice *dev) +{ + if (device_get_uclass_id(dev->parent) != UCLASS_I2C) + return -EPROTONOSUPPORT; + + return 0; +} + +static struct sysreset_ops renesas_v3hsk_sysreset = { + .request = renesas_v3hsk_sysreset_request, +}; + +static const struct udevice_id renesas_v3hsk_sysreset_ids[] = { + { .compatible = "renesas,v3hsk-cpld" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(sysreset_renesas_v3hsk) = { + .name = "renesas_v3hsk_sysreset", + .id = UCLASS_SYSRESET, + .ops = &renesas_v3hsk_sysreset, + .probe = renesas_v3hsk_sysreset_probe, + .of_match = renesas_v3hsk_sysreset_ids, +}; diff --git a/board/renesas/v3msk/Kconfig b/board/renesas/v3msk/Kconfig new file mode 100644 index 0000000..fe037fd --- /dev/null +++ b/board/renesas/v3msk/Kconfig @@ -0,0 +1,15 @@ +if TARGET_V3MSK + +config SYS_SOC + default "rmobile" + +config SYS_BOARD + default "v3msk" + +config SYS_VENDOR + default "renesas" + +config SYS_CONFIG_NAME + default "rcar-gen3-common" + +endif diff --git a/board/renesas/v3msk/MAINTAINERS b/board/renesas/v3msk/MAINTAINERS new file mode 100644 index 0000000..12822a4 --- /dev/null +++ b/board/renesas/v3msk/MAINTAINERS @@ -0,0 +1,6 @@ +V3MSK BOARD +M: Cogent Embedded, Inc. <source@cogentembedded.com> +S: Maintained +F: board/renesas/v3msk/ +F: include/configs/v3msk.h +F: configs/r8a77970_v3msk_defconfig diff --git a/board/renesas/v3msk/Makefile b/board/renesas/v3msk/Makefile new file mode 100644 index 0000000..ec493e5 --- /dev/null +++ b/board/renesas/v3msk/Makefile @@ -0,0 +1,15 @@ +# +# board/renesas/v3msk/Makefile +# +# Copyright (C) 2019 Renesas Electronics Corporation +# Copyright (C) 2019 Cogent Embedded, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-y := ../rcar-common/gen3-spl.o +else +obj-y := ../rcar-common/v3-common.o ../rcar-common/common.o +obj-$(CONFIG_SYSRESET) += cpld.o +endif diff --git a/board/renesas/v3msk/cpld.c b/board/renesas/v3msk/cpld.c new file mode 100644 index 0000000..aed616a --- /dev/null +++ b/board/renesas/v3msk/cpld.c @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * V3MSK board CPLD access support + * + * Copyright (C) 2019 Renesas Electronics Corporation + * Copyright (C) 2019 Cogent Embedded, Inc. + * + */ + +#include <common.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <dm.h> +#include <errno.h> +#include <linux/err.h> +#include <sysreset.h> +#include <linux/delay.h> +#include <command.h> + +#define CPLD_ADDR_PRODUCT_L 0x000 /* R */ +#define CPLD_ADDR_PRODUCT_H 0x001 /* R */ +#define CPLD_ADDR_CPLD_VERSION_D 0x002 /* R */ +#define CPLD_ADDR_CPLD_VERSION_Y 0x003 /* R */ +#define CPLD_ADDR_MODE_SET_L 0x004 /* R/W */ +#define CPLD_ADDR_MODE_SET_H 0x005 /* R/W */ +#define CPLD_ADDR_MODE_APPLIED_L 0x006 /* R */ +#define CPLD_ADDR_MODE_APPLIED_H 0x007 /* R */ +#define CPLD_ADDR_DIPSW 0x008 /* R */ +#define CPLD_ADDR_RESET 0x00A /* R/W */ +#define CPLD_ADDR_POWER_CFG 0x00B /* R/W */ +#define CPLD_ADDR_PERI_CFG1 0x00C /* R/W */ +#define CPLD_ADDR_PERI_CFG2 0x00D /* R/W */ +#define CPLD_ADDR_LEDS 0x00E /* R/W */ +#define CPLD_ADDR_PCB_VERSION 0x300 /* R */ +#define CPLD_ADDR_SOC_VERSION 0x301 /* R */ +#define CPLD_ADDR_PCB_SN_L 0x302 /* R */ +#define CPLD_ADDR_PCB_SN_H 0x303 /* R */ + +#define MDIO_DELAY 10 /* microseconds */ + +#define CPLD_MAX_GPIOS 2 + +struct renesas_v3msk_sysreset_priv { + struct gpio_desc miso; + struct gpio_desc mosi; + struct gpio_desc mdc; + struct gpio_desc enablez; + /* + * V3MSK Videobox Mini board has CANFD PHY connected + * we must shutdown this chip to use bb pins + */ + struct gpio_desc gpios[CPLD_MAX_GPIOS]; +}; + +static void mdio_bb_active_mdio(struct renesas_v3msk_sysreset_priv *priv) +{ + dm_gpio_set_dir_flags(&priv->mosi, GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); +} + +static void mdio_bb_tristate_mdio(struct renesas_v3msk_sysreset_priv *priv) +{ + dm_gpio_set_dir_flags(&priv->mosi, GPIOD_IS_IN); +} + +static void mdio_bb_set_mdio(struct renesas_v3msk_sysreset_priv *priv, int val) +{ + dm_gpio_set_value(&priv->mosi, val); +} + +static int mdio_bb_get_mdio(struct renesas_v3msk_sysreset_priv *priv) +{ + return dm_gpio_get_value(&priv->miso); +} + +static void mdio_bb_set_mdc(struct renesas_v3msk_sysreset_priv *priv, int val) +{ + dm_gpio_set_value(&priv->mdc, val); +} + +static void mdio_bb_delay(void) +{ + udelay(MDIO_DELAY); +} + +/* Send the preamble, address, and register (common to read and write) */ +static void mdio_bb_pre(struct renesas_v3msk_sysreset_priv *priv, + u8 op, u8 addr, u8 reg) +{ + int i; + + /* 32-bit preamble */ + mdio_bb_active_mdio(priv); + mdio_bb_set_mdio(priv, 1); + for (i = 0; i < 32; i++) { + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + } + /* send the ST (2-bits of '01') */ + mdio_bb_set_mdio(priv, 0); + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + mdio_bb_set_mdio(priv, 1); + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + /* send the OP (2-bits of Opcode: '10'-read, '01'-write) */ + mdio_bb_set_mdio(priv, op >> 1); + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + mdio_bb_set_mdio(priv, op & 1); + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + /* send the PA5 (5-bits of PHY address) */ + for (i = 0; i < 5; i++) { + mdio_bb_set_mdio(priv, addr & 0x10); /* MSB first */ + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + addr <<= 1; + } + /* send the RA5 (5-bits of register address) */ + for (i = 0; i < 5; i++) { + mdio_bb_set_mdio(priv, reg & 0x10); /* MSB first */ + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + reg <<= 1; + } +} + +static int mdio_bb_read(struct renesas_v3msk_sysreset_priv *priv, + u8 addr, u8 reg) +{ + int i; + u16 data = 0; + + mdio_bb_pre(priv, 2, addr, reg); + /* tri-state MDIO */ + mdio_bb_tristate_mdio(priv); + /* read TA (2-bits of turn-around, last bit must be '0') */ + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + /* check the turnaround bit: the PHY should drive line to zero */ + if (mdio_bb_get_mdio(priv) != 0) { + printf("PHY didn't drive TA low\n"); + for (i = 0; i < 32; i++) { + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + } + /* There is no PHY, set value to 0xFFFF */ + return 0xFFFF; + } + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + /* read 16-bits of data */ + for (i = 0; i < 16; i++) { + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + data <<= 1; + data |= mdio_bb_get_mdio(priv); + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + } + + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + + debug("cpld_read(0x%x) @ 0x%x = 0x%04x\n", reg, addr, data); + + return data; +} + +static void mdio_bb_write(struct renesas_v3msk_sysreset_priv *priv, + u8 addr, u8 reg, u16 val) +{ + int i; + + mdio_bb_pre(priv, 1, addr, reg); + /* send the TA (2-bits of turn-around '10') */ + mdio_bb_set_mdio(priv, 1); + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + mdio_bb_set_mdio(priv, 0); + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + /* write 16-bits of data */ + for (i = 0; i < 16; i++) { + mdio_bb_set_mdio(priv, val & 0x8000); /* MSB first */ + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); + val <<= 1; + } + /* tri-state MDIO */ + mdio_bb_tristate_mdio(priv); + mdio_bb_set_mdc(priv, 0); + mdio_bb_delay(); + mdio_bb_set_mdc(priv, 1); + mdio_bb_delay(); +} + +static u16 cpld_read(struct udevice *dev, u16 addr) +{ + struct renesas_v3msk_sysreset_priv *priv = dev_get_priv(dev); + + /* random flash reads require 2 reads: first read is unreliable */ + if (addr >= CPLD_ADDR_PCB_VERSION) + mdio_bb_read(priv, addr >> 5, addr & 0x1f); + + return mdio_bb_read(priv, addr >> 5, addr & 0x1f); +} + +static void cpld_write(struct udevice *dev, u16 addr, u16 data) +{ + struct renesas_v3msk_sysreset_priv *priv = dev_get_priv(dev); + + mdio_bb_write(priv, addr >> 5, addr & 0x1f, data); +} + +static int do_cpld(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]) +{ + struct udevice *dev; + u16 addr, val; + int ret; + + ret = uclass_get_device_by_driver(UCLASS_SYSRESET, + DM_DRIVER_GET(sysreset_renesas_v3msk), + &dev); + if (ret) + return ret; + + if (argc == 2 && strcmp(argv[1], "info") == 0) { + printf("Product: 0x%08x\n", + (cpld_read(dev, CPLD_ADDR_PRODUCT_H) << 16) | + cpld_read(dev, CPLD_ADDR_PRODUCT_L)); + printf("CPLD version: 0x%08x\n", + (cpld_read(dev, CPLD_ADDR_CPLD_VERSION_Y) << 16) | + cpld_read(dev, CPLD_ADDR_CPLD_VERSION_D)); + printf("Mode setting (MD0..26): 0x%08x\n", + (cpld_read(dev, CPLD_ADDR_MODE_APPLIED_H) << 16) | + cpld_read(dev, CPLD_ADDR_MODE_APPLIED_L)); + printf("DIPSW (SW4, SW5): 0x%02x, 0x%x\n", + (cpld_read(dev, CPLD_ADDR_DIPSW) & 0xff) ^ 0xff, + (cpld_read(dev, CPLD_ADDR_DIPSW) >> 8) ^ 0xf); + printf("Power config: 0x%08x\n", + cpld_read(dev, CPLD_ADDR_POWER_CFG)); + printf("Periferals config: 0x%08x\n", + (cpld_read(dev, CPLD_ADDR_PERI_CFG2) << 16) | + cpld_read(dev, CPLD_ADDR_PERI_CFG1)); + printf("PCB version: %d.%d\n", + cpld_read(dev, CPLD_ADDR_PCB_VERSION) >> 8, + cpld_read(dev, CPLD_ADDR_PCB_VERSION) & 0xff); + printf("SOC version: %d.%d\n", + cpld_read(dev, CPLD_ADDR_SOC_VERSION) >> 8, + cpld_read(dev, CPLD_ADDR_SOC_VERSION) & 0xff); + printf("PCB S/N: %d\n", + (cpld_read(dev, CPLD_ADDR_PCB_SN_H) << 16) | + cpld_read(dev, CPLD_ADDR_PCB_SN_L)); + return 0; + } + + if (argc < 3) + return CMD_RET_USAGE; + + addr = simple_strtoul(argv[2], NULL, 16); + if (!(addr >= CPLD_ADDR_PRODUCT_L && addr <= CPLD_ADDR_LEDS)) { + printf("cpld invalid addr\n"); + return CMD_RET_USAGE; + } + + if (argc == 3 && strcmp(argv[1], "read") == 0) { + printf("0x%x\n", cpld_read(dev, addr)); + } else if (argc == 4 && strcmp(argv[1], "write") == 0) { + val = simple_strtoul(argv[3], NULL, 16); + cpld_write(dev, addr, val); + } + + return 0; +} + +U_BOOT_CMD(cpld, 4, 1, do_cpld, + "CPLD access", + "info\n" + "cpld read addr\n" + "cpld write addr val\n" +); + +static int renesas_v3msk_sysreset_request(struct udevice *dev, enum sysreset_t type) +{ + cpld_write(dev, CPLD_ADDR_RESET, 1); + + return -EINPROGRESS; +} + +static int renesas_v3msk_sysreset_probe(struct udevice *dev) +{ + struct renesas_v3msk_sysreset_priv *priv = dev_get_priv(dev); + + if (gpio_request_by_name(dev, "gpio-miso", 0, &priv->miso, + GPIOD_IS_IN)) + return -EINVAL; + + if (gpio_request_by_name(dev, "gpio-mosi", 0, &priv->mosi, + GPIOD_IS_OUT)) + return -EINVAL; + + if (gpio_request_by_name(dev, "gpio-mdc", 0, &priv->mdc, + GPIOD_IS_OUT)) + return -EINVAL; + + if (gpio_request_by_name(dev, "gpio-enablez", 0, &priv->enablez, + GPIOD_IS_OUT)) + return -EINVAL; + + /* V3MSK Videobox Mini board has CANFD PHY connected + * we must shutdown this chip to use bb pins + */ + gpio_request_list_by_name(dev, "gpios", priv->gpios, CPLD_MAX_GPIOS, + GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); + + return 0; +} + +static struct sysreset_ops renesas_v3msk_sysreset = { + .request = renesas_v3msk_sysreset_request, +}; + +static const struct udevice_id renesas_v3msk_sysreset_ids[] = { + { .compatible = "renesas,v3msk-cpld" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(sysreset_renesas_v3msk) = { + .name = "renesas_v3msk_sysreset", + .id = UCLASS_SYSRESET, + .ops = &renesas_v3msk_sysreset, + .probe = renesas_v3msk_sysreset_probe, + .of_match = renesas_v3msk_sysreset_ids, + .priv_auto = sizeof(struct renesas_v3msk_sysreset_priv), +}; diff --git a/board/renesas/whitehawk/whitehawk.c b/board/renesas/whitehawk/whitehawk.c index 19f09e0..32284b2 100644 --- a/board/renesas/whitehawk/whitehawk.c +++ b/board/renesas/whitehawk/whitehawk.c @@ -65,8 +65,3 @@ int board_init(void) return 0; } - -void reset_cpu(void) -{ - writel(RST_SPRES, RST_SRESCR0); -} diff --git a/configs/r8a77970_v3msk_defconfig b/configs/r8a77970_v3msk_defconfig new file mode 100644 index 0000000..74a140a --- /dev/null +++ b/configs/r8a77970_v3msk_defconfig @@ -0,0 +1,87 @@ +CONFIG_ARM=y +CONFIG_COUNTER_FREQUENCY=16666666 +CONFIG_ARCH_CPU_INIT=y +CONFIG_ARCH_RMOBILE=y +CONFIG_TEXT_BASE=0x50000000 +CONFIG_SYS_MALLOC_LEN=0x4000000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_ENV_SIZE=0x40000 +CONFIG_ENV_OFFSET=0x700000 +CONFIG_ENV_SECT_SIZE=0x40000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="r8a77970-v3msk-u-boot" +CONFIG_SPL_TEXT_BASE=0xe6318000 +CONFIG_RCAR_GEN3=y +CONFIG_R8A77970=y +CONFIG_TARGET_V3MSK=y +CONFIG_SPL_STACK=0xe6304000 +CONFIG_SYS_LOAD_ADDR=0x58000000 +CONFIG_LTO=y +CONFIG_REMAKE_ELF=y +CONFIG_SYS_MONITOR_LEN=1048576 +CONFIG_FIT=y +# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTARGS=y +CONFIG_DEFAULT_FDT_FILE="r8a77970-v3msk.dtb" +CONFIG_SYS_MALLOC_BOOTPARAMS=y +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xe631f000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2068 +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DFU=y +CONFIG_CMD_ASKENV=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SPI=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_OF_DTB_PROPS_REMOVE=y +CONFIG_OF_REMOVE_PROPS="dmas dma-names interrupt-parent interrupts interrupts-extended interrupt-names interrupt-map interrupt-map-mask iommus" +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_VERSION_VARIABLE=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_CLK_RENESAS=y +CONFIG_DFU_TFTP=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y +CONFIG_RCAR_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_RCAR_I2C=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_RENESAS_SDHI=y +CONFIG_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_SPANSION=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_BITBANGMII=y +CONFIG_BITBANGMII_MULTI=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_RENESAS_RAVB=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_SCIF_CONSOLE=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_RENESAS_RPC_SPI=y +CONFIG_SYSRESET=y diff --git a/configs/r8a77980_v3hsk_defconfig b/configs/r8a77980_v3hsk_defconfig new file mode 100644 index 0000000..564ff2d --- /dev/null +++ b/configs/r8a77980_v3hsk_defconfig @@ -0,0 +1,83 @@ +CONFIG_ARM=y +CONFIG_COUNTER_FREQUENCY=16666666 +CONFIG_ARCH_CPU_INIT=y +CONFIG_ARCH_RMOBILE=y +CONFIG_SYS_MALLOC_LEN=0x4000000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_ENV_SIZE=0x40000 +CONFIG_ENV_OFFSET=0x700000 +CONFIG_ENV_SECT_SIZE=0x40000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="r8a77980-v3hsk-u-boot" +CONFIG_SPL_TEXT_BASE=0xe6318000 +CONFIG_RCAR_GEN3=y +CONFIG_R8A77980=y +CONFIG_TARGET_V3HSK=y +CONFIG_SPL_STACK=0xe6304000 +CONFIG_SYS_LOAD_ADDR=0x58000000 +CONFIG_LTO=y +CONFIG_REMAKE_ELF=y +CONFIG_SYS_MONITOR_LEN=1048576 +CONFIG_FIT=y +CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTARGS=y +CONFIG_DEFAULT_FDT_FILE="r8a77980-v3hsk.dtb" +# CONFIG_BOARD_EARLY_INIT_F is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xe631f000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2068 +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_ASKENV=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SPI=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_OF_DTB_PROPS_REMOVE=y +CONFIG_OF_REMOVE_PROPS="dmas dma-names interrupt-parent interrupts interrupts-extended interrupt-names interrupt-map interrupt-map-mask iommus" +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_VERSION_VARIABLE=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_CLK_RENESAS=y +CONFIG_RCAR_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_RCAR_I2C=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_RENESAS_SDHI=y +CONFIG_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_SPANSION=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_BITBANGMII=y +CONFIG_BITBANGMII_MULTI=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_SH_ETHER=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_SCIF_CONSOLE=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_RENESAS_RPC_SPI=y +CONFIG_SYSRESET=y diff --git a/doc/README.rmobile b/doc/README.rmobile index ea170a2..524d839 100644 --- a/doc/README.rmobile +++ b/doc/README.rmobile @@ -35,6 +35,7 @@ Currently the following boards are supported: | R8A77965 M3-N | Renesas Electronics ULCB | r8a77965_ulcb |---------------+----------------------------------------+------------------- | R8A77970 V3M | Renesas Electronics Eagle | r8a77970_eagle_defconfig +| R8A77970 V3M | Renesas Electronics V3MSK | r8a77970_v3msk_defconfig |---------------+----------------------------------------+------------------- | R8A77995 D3 | Renesas Electronics Draak | r8a77995_draak_defconfig '===============+========================================+=================== diff --git a/include/configs/eagle.h b/include/configs/eagle.h deleted file mode 100644 index c751f75..0000000 --- a/include/configs/eagle.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * include/configs/eagle.h - * This file is Eagle board configuration. - * - * Copyright (C) 2015 Renesas Electronics Corporation - */ - -#ifndef __EAGLE_H -#define __EAGLE_H - -#include "rcar-gen3-common.h" - -/* Environment compatibility */ - -/* Board Clock */ -/* XTAL_CLK : 33.33MHz */ - -#endif /* __EAGLE_H */ diff --git a/include/configs/v3hsk.h b/include/configs/v3hsk.h new file mode 100644 index 0000000..58c2e88 --- /dev/null +++ b/include/configs/v3hsk.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * include/configs/v3hsk.h + * This file is V3HSK board configuration. + * + * Copyright (C) 2019 Renesas Electronics Corporation + * Copyright (C) 2019 Cogent Embedded, Inc. + */ + +#ifndef __V3HSK_H +#define __V3HSK_H + +#include "rcar-gen3-common.h" + +/* Environment compatibility */ + +/* SH Ether */ +#define CFG_SH_ETHER_USE_PORT 0 +#define CFG_SH_ETHER_PHY_ADDR 0x0 +#define CFG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RGMII_ID +#define CFG_SH_ETHER_CACHE_WRITEBACK +#define CFG_SH_ETHER_CACHE_INVALIDATE +#define CFG_SH_ETHER_ALIGNE_SIZE 64 + +/* Board Clock */ +/* XTAL_CLK : 33.33MHz */ + +#endif /* __V3HSK_H */ |