Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SCSI_AHCI_PLAT
   CONFIG_SYS_SCSI_MAX_SCSI_ID
   CONFIG_SYS_SCSI_MAX_LUN
   CONFIG_SYS_SATA_MAX_DEVICE

Drop CONFIG_SCSI for everything except the sandbox build. We only need
one build for tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>

140 files changed, 128 insertions, 161 deletions

diff --git a/README b/README
index a0d9cb4..f51f392 100644
--- a/README
+++ b/README
@@ -732,14 +732,6 @@ The following options need to be configured:
 			When enabled, makes the IDE subsystem use 64bit sector addresses.
 			Default is 32bit.
 
-- SCSI Support:
-		CONFIG_SYS_SCSI_MAX_LUN [8] and CONFIG_SYS_SCSI_MAX_SCSI_ID [7]
-		can be adjusted to define the maximum numbers of LUNs and SCSI
-		IDs.
-
-		The environment variable 'scsidevs' is set to the number of
-		SCSI devices found during the last scan.
-
 - NETWORK Support (PCI):
 		CONFIG_E1000_SPI
 		Utility code for direct access to the SPI bus on Intel 8257x.
diff --git a/arch/Kconfig b/arch/Kconfig
index bea8ead..e619144 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -172,7 +172,6 @@ config SANDBOX
 	imply FIRMWARE
 	imply HASH_VERIFY
 	imply LZMA
-	imply SCSI
 	imply TEE
 	imply AVB_VERIFY
 	imply LIBAVB
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index 489286e..86a4e1f 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -78,9 +78,6 @@
 
 /* SATA */
 #define AHCI_BASE_ADDR				(CONFIG_SYS_IMMR + 0x02200000)
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
 #ifdef CONFIG_DDR_SPD
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE		((phys_size_t)2 << 30)
diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig
index 0c3b6ae..f875aa8 100644
--- a/configs/MPC837XERDB_defconfig
+++ b/configs/MPC837XERDB_defconfig
@@ -171,6 +171,7 @@ CONFIG_ENV_ADDR=0xFE080000
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_FSL_SATA=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_SYS_BR0_PRELIM_BOOL=y
 CONFIG_SYS_BR0_PRELIM=0xFE001001
 CONFIG_SYS_OR0_PRELIM=0xFF800193
diff --git a/configs/P1010RDB-PA_36BIT_NAND_defconfig b/configs/P1010RDB-PA_36BIT_NAND_defconfig
index ef7f24b..61fd2a7 100644
--- a/configs/P1010RDB-PA_36BIT_NAND_defconfig
+++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig
@@ -54,6 +54,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PA_36BIT_NOR_defconfig b/configs/P1010RDB-PA_36BIT_NOR_defconfig
index 892a8a6..0e537eb 100644
--- a/configs/P1010RDB-PA_36BIT_NOR_defconfig
+++ b/configs/P1010RDB-PA_36BIT_NOR_defconfig
@@ -36,6 +36,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
index 705d0da..dc113be 100644
--- a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
+++ b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
@@ -48,6 +48,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
index e4ad50f..cd5c80c 100644
--- a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
@@ -50,6 +50,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig
index b303c4c..f80a0d9 100644
--- a/configs/P1010RDB-PA_NAND_defconfig
+++ b/configs/P1010RDB-PA_NAND_defconfig
@@ -53,6 +53,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig
index 8db09ba..035aac2 100644
--- a/configs/P1010RDB-PA_NOR_defconfig
+++ b/configs/P1010RDB-PA_NOR_defconfig
@@ -35,6 +35,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PA_SDCARD_defconfig b/configs/P1010RDB-PA_SDCARD_defconfig
index f02757d..cd031d2 100644
--- a/configs/P1010RDB-PA_SDCARD_defconfig
+++ b/configs/P1010RDB-PA_SDCARD_defconfig
@@ -47,6 +47,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PA_SPIFLASH_defconfig b/configs/P1010RDB-PA_SPIFLASH_defconfig
index 9a09473..f339502 100644
--- a/configs/P1010RDB-PA_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PA_SPIFLASH_defconfig
@@ -49,6 +49,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PB_36BIT_NAND_defconfig b/configs/P1010RDB-PB_36BIT_NAND_defconfig
index 8582868..ba64f88 100644
--- a/configs/P1010RDB-PB_36BIT_NAND_defconfig
+++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig
@@ -55,6 +55,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PB_36BIT_NOR_defconfig b/configs/P1010RDB-PB_36BIT_NOR_defconfig
index 84173e2..a8e9556 100644
--- a/configs/P1010RDB-PB_36BIT_NOR_defconfig
+++ b/configs/P1010RDB-PB_36BIT_NOR_defconfig
@@ -37,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig
index 4b0a1ab..8719967 100644
--- a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig
+++ b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig
@@ -49,6 +49,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
index 986b992..2d646f9 100644
--- a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
@@ -51,6 +51,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig
index e436476..f8437ff 100644
--- a/configs/P1010RDB-PB_NAND_defconfig
+++ b/configs/P1010RDB-PB_NAND_defconfig
@@ -54,6 +54,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PB_NOR_defconfig b/configs/P1010RDB-PB_NOR_defconfig
index 62f4c89..b99531c 100644
--- a/configs/P1010RDB-PB_NOR_defconfig
+++ b/configs/P1010RDB-PB_NOR_defconfig
@@ -36,6 +36,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PB_SDCARD_defconfig b/configs/P1010RDB-PB_SDCARD_defconfig
index 9cdb359..ebe2af6 100644
--- a/configs/P1010RDB-PB_SDCARD_defconfig
+++ b/configs/P1010RDB-PB_SDCARD_defconfig
@@ -48,6 +48,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P1010RDB-PB_SPIFLASH_defconfig b/configs/P1010RDB-PB_SPIFLASH_defconfig
index 299564c..7893782 100644
--- a/configs/P1010RDB-PB_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PB_SPIFLASH_defconfig
@@ -50,6 +50,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig
index 9dc7257..01d6192 100644
--- a/configs/P2041RDB_NAND_defconfig
+++ b/configs/P2041RDB_NAND_defconfig
@@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_BR0_PRELIM_BOOL=y
 CONFIG_SYS_BR0_PRELIM=0xFFA00C21
diff --git a/configs/P2041RDB_SDCARD_defconfig b/configs/P2041RDB_SDCARD_defconfig
index 997f461..dc56c79 100644
--- a/configs/P2041RDB_SDCARD_defconfig
+++ b/configs/P2041RDB_SDCARD_defconfig
@@ -41,6 +41,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_BR0_PRELIM_BOOL=y
 CONFIG_SYS_BR0_PRELIM=0xE8001001
diff --git a/configs/P2041RDB_SPIFLASH_defconfig b/configs/P2041RDB_SPIFLASH_defconfig
index d54d621..78a2450 100644
--- a/configs/P2041RDB_SPIFLASH_defconfig
+++ b/configs/P2041RDB_SPIFLASH_defconfig
@@ -42,6 +42,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_BR0_PRELIM_BOOL=y
 CONFIG_SYS_BR0_PRELIM=0xE8001001
diff --git a/configs/P2041RDB_defconfig b/configs/P2041RDB_defconfig
index b2fb18c..f6bf4da 100644
--- a/configs/P2041RDB_defconfig
+++ b/configs/P2041RDB_defconfig
@@ -37,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_BR0_PRELIM_BOOL=y
 CONFIG_SYS_BR0_PRELIM=0xE8001001
diff --git a/configs/P3041DS_NAND_defconfig b/configs/P3041DS_NAND_defconfig
index 971254a..ec58500 100644
--- a/configs/P3041DS_NAND_defconfig
+++ b/configs/P3041DS_NAND_defconfig
@@ -38,6 +38,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
diff --git a/configs/P3041DS_SDCARD_defconfig b/configs/P3041DS_SDCARD_defconfig
index 7cf3c22..58a3eae 100644
--- a/configs/P3041DS_SDCARD_defconfig
+++ b/configs/P3041DS_SDCARD_defconfig
@@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
diff --git a/configs/P3041DS_SPIFLASH_defconfig b/configs/P3041DS_SPIFLASH_defconfig
index 0e810f8..c48976b 100644
--- a/configs/P3041DS_SPIFLASH_defconfig
+++ b/configs/P3041DS_SPIFLASH_defconfig
@@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
diff --git a/configs/P3041DS_defconfig b/configs/P3041DS_defconfig
index db1b5fb..fcc7361 100644
--- a/configs/P3041DS_defconfig
+++ b/configs/P3041DS_defconfig
@@ -35,6 +35,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
diff --git a/configs/P5040DS_NAND_defconfig b/configs/P5040DS_NAND_defconfig
index 90503b6..279976c 100644
--- a/configs/P5040DS_NAND_defconfig
+++ b/configs/P5040DS_NAND_defconfig
@@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
diff --git a/configs/P5040DS_SDCARD_defconfig b/configs/P5040DS_SDCARD_defconfig
index 90216f6..34ebc51 100644
--- a/configs/P5040DS_SDCARD_defconfig
+++ b/configs/P5040DS_SDCARD_defconfig
@@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
diff --git a/configs/P5040DS_SPIFLASH_defconfig b/configs/P5040DS_SPIFLASH_defconfig
index 8b17812..ea8b673 100644
--- a/configs/P5040DS_SPIFLASH_defconfig
+++ b/configs/P5040DS_SPIFLASH_defconfig
@@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
diff --git a/configs/P5040DS_defconfig b/configs/P5040DS_defconfig
index 6836fcf..e9bf7ff 100644
--- a/configs/P5040DS_defconfig
+++ b/configs/P5040DS_defconfig
@@ -35,6 +35,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
diff --git a/configs/T2080QDS_NAND_defconfig b/configs/T2080QDS_NAND_defconfig
index 521b0cf..1b6ef8a 100644
--- a/configs/T2080QDS_NAND_defconfig
+++ b/configs/T2080QDS_NAND_defconfig
@@ -56,6 +56,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
diff --git a/configs/T2080QDS_SDCARD_defconfig b/configs/T2080QDS_SDCARD_defconfig
index eb0b341..8ab1c5d 100644
--- a/configs/T2080QDS_SDCARD_defconfig
+++ b/configs/T2080QDS_SDCARD_defconfig
@@ -55,6 +55,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
diff --git a/configs/T2080QDS_SECURE_BOOT_defconfig b/configs/T2080QDS_SECURE_BOOT_defconfig
index 97bfbd9..a84b7ad 100644
--- a/configs/T2080QDS_SECURE_BOOT_defconfig
+++ b/configs/T2080QDS_SECURE_BOOT_defconfig
@@ -40,6 +40,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
diff --git a/configs/T2080QDS_SPIFLASH_defconfig b/configs/T2080QDS_SPIFLASH_defconfig
index a09d147..8fd0248 100644
--- a/configs/T2080QDS_SPIFLASH_defconfig
+++ b/configs/T2080QDS_SPIFLASH_defconfig
@@ -57,6 +57,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
diff --git a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
index db09d3b..f9dbc84 100644
--- a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
+++ b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
@@ -37,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_REMOTE=y
 CONFIG_ENV_ADDR=0xFFE20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
diff --git a/configs/T2080QDS_defconfig b/configs/T2080QDS_defconfig
index c036d5d..424b3f2 100644
--- a/configs/T2080QDS_defconfig
+++ b/configs/T2080QDS_defconfig
@@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig
index 17558d4..1c55d30 100644
--- a/configs/T2080RDB_NAND_defconfig
+++ b/configs/T2080RDB_NAND_defconfig
@@ -60,6 +60,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
diff --git a/configs/T2080RDB_SDCARD_defconfig b/configs/T2080RDB_SDCARD_defconfig
index 949976b..ea9c479 100644
--- a/configs/T2080RDB_SDCARD_defconfig
+++ b/configs/T2080RDB_SDCARD_defconfig
@@ -59,6 +59,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
diff --git a/configs/T2080RDB_SPIFLASH_defconfig b/configs/T2080RDB_SPIFLASH_defconfig
index 66ca339..5e08b82 100644
--- a/configs/T2080RDB_SPIFLASH_defconfig
+++ b/configs/T2080RDB_SPIFLASH_defconfig
@@ -61,6 +61,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
diff --git a/configs/T2080RDB_defconfig b/configs/T2080RDB_defconfig
index 1e53273..1c1fea6 100644
--- a/configs/T2080RDB_defconfig
+++ b/configs/T2080RDB_defconfig
@@ -44,6 +44,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
diff --git a/configs/T2080RDB_revD_NAND_defconfig b/configs/T2080RDB_revD_NAND_defconfig
index 33591c2..ae924b1 100644
--- a/configs/T2080RDB_revD_NAND_defconfig
+++ b/configs/T2080RDB_revD_NAND_defconfig
@@ -61,6 +61,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
diff --git a/configs/T2080RDB_revD_SDCARD_defconfig b/configs/T2080RDB_revD_SDCARD_defconfig
index 82f6c96..fef0893 100644
--- a/configs/T2080RDB_revD_SDCARD_defconfig
+++ b/configs/T2080RDB_revD_SDCARD_defconfig
@@ -60,6 +60,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
diff --git a/configs/T2080RDB_revD_SPIFLASH_defconfig b/configs/T2080RDB_revD_SPIFLASH_defconfig
index 075691f..0b7e715 100644
--- a/configs/T2080RDB_revD_SPIFLASH_defconfig
+++ b/configs/T2080RDB_revD_SPIFLASH_defconfig
@@ -62,6 +62,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
diff --git a/configs/T2080RDB_revD_defconfig b/configs/T2080RDB_revD_defconfig
index 1d5628f..c78b21d 100644
--- a/configs/T2080RDB_revD_defconfig
+++ b/configs/T2080RDB_revD_defconfig
@@ -45,6 +45,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
diff --git a/configs/T4240RDB_SDCARD_defconfig b/configs/T4240RDB_SDCARD_defconfig
index ef2d1d7..ea6a528 100644
--- a/configs/T4240RDB_SDCARD_defconfig
+++ b/configs/T4240RDB_SDCARD_defconfig
@@ -51,6 +51,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133333333
 CONFIG_DDR_ECC=y
diff --git a/configs/T4240RDB_defconfig b/configs/T4240RDB_defconfig
index 6784dd7..e17e8b1 100644
--- a/configs/T4240RDB_defconfig
+++ b/configs/T4240RDB_defconfig
@@ -36,6 +36,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133333333
 CONFIG_DDR_ECC=y
diff --git a/configs/am57xx_hs_evm_usb_defconfig b/configs/am57xx_hs_evm_usb_defconfig
index 7f19d99..10106ab 100644
--- a/configs/am57xx_hs_evm_usb_defconfig
+++ b/configs/am57xx_hs_evm_usb_defconfig
@@ -102,6 +102,7 @@ CONFIG_DM_PMIC=y
 CONFIG_PMIC_PALMAS=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_PALMAS=y
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_DM_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
diff --git a/configs/controlcenterdc_defconfig b/configs/controlcenterdc_defconfig
index b6eb955..fa41c5e 100644
--- a/configs/controlcenterdc_defconfig
+++ b/configs/controlcenterdc_defconfig
@@ -77,6 +77,8 @@ CONFIG_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCI_MVEBU=y
 CONFIG_SCSI=y
+CONFIG_SCSI_AHCI_PLAT=y
+CONFIG_SYS_SCSI_MAX_SCSI_ID=2
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
diff --git a/configs/d2net_v2_defconfig b/configs/d2net_v2_defconfig
index dc8165a..18dceb9 100644
--- a/configs/d2net_v2_defconfig
+++ b/configs/d2net_v2_defconfig
@@ -48,6 +48,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_KIRKWOOD_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
diff --git a/configs/db-mv784mp-gp_defconfig b/configs/db-mv784mp-gp_defconfig
index 70d1917..6d817d2 100644
--- a/configs/db-mv784mp-gp_defconfig
+++ b/configs/db-mv784mp-gp_defconfig
@@ -50,6 +50,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 # CONFIG_MMC is not set
diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig
index a46e2b4..2c3e392 100644
--- a/configs/dreamplug_defconfig
+++ b/configs/dreamplug_defconfig
@@ -42,6 +42,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_SYS_ATA_STRIDE=4
 CONFIG_SYS_ATA_DATA_OFFSET=0x100
 CONFIG_SYS_ATA_REG_OFFSET=0x100
diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig
index ec1a763..663b2a4 100644
--- a/configs/goflexhome_defconfig
+++ b/configs/goflexhome_defconfig
@@ -46,6 +46,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig
index 3e8bfcf..61a25c2 100644
--- a/configs/highbank_defconfig
+++ b/configs/highbank_defconfig
@@ -29,3 +29,5 @@ CONFIG_BOOTCOUNT_LIMIT=y
 # CONFIG_MMC is not set
 CONFIG_CALXEDA_XGMAC=y
 CONFIG_SCSI=y
+CONFIG_SCSI_AHCI_PLAT=y
+CONFIG_SYS_SCSI_MAX_SCSI_ID=5
diff --git a/configs/inetspace_v2_defconfig b/configs/inetspace_v2_defconfig
index 9d8ea84..bc4bd3a 100644
--- a/configs/inetspace_v2_defconfig
+++ b/configs/inetspace_v2_defconfig
@@ -48,6 +48,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_KIRKWOOD_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
diff --git a/configs/ls1021atsn_qspi_defconfig b/configs/ls1021atsn_qspi_defconfig
index 5c8cee3..4221060 100644
--- a/configs/ls1021atsn_qspi_defconfig
+++ b/configs/ls1021atsn_qspi_defconfig
@@ -62,6 +62,7 @@ CONFIG_TSEC_ENET=y
 CONFIG_NVME=y
 CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
diff --git a/configs/ls1021atsn_sdcard_defconfig b/configs/ls1021atsn_sdcard_defconfig
index a3b8f24..627038c 100644
--- a/configs/ls1021atsn_sdcard_defconfig
+++ b/configs/ls1021atsn_sdcard_defconfig
@@ -78,6 +78,7 @@ CONFIG_TSEC_ENET=y
 CONFIG_NVME=y
 CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
index 756e072..a8288e9 100644
--- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
@@ -87,6 +87,7 @@ CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_U_QE=y
 CONFIG_SYS_QE_FW_ADDR=0x940000
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index 310dfb4..a8d0231 100644
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -88,6 +88,7 @@ CONFIG_PCIE_LAYERSCAPE_EP=y
 CONFIG_POWER_LEGACY=y
 CONFIG_POWER_I2C=y
 CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
index 266fce3..96a96f5 100644
--- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
@@ -91,6 +91,7 @@ CONFIG_MII=y
 CONFIG_FSL_LS_MDIO=y
 CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig
index 62a1686..c006e78 100644
--- a/configs/lschlv2_defconfig
+++ b/configs/lschlv2_defconfig
@@ -40,6 +40,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_KIRKWOOD_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig
index 6fa01c6..c2e4770 100644
--- a/configs/lsxhl_defconfig
+++ b/configs/lsxhl_defconfig
@@ -40,6 +40,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_KIRKWOOD_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
diff --git a/configs/net2big_v2_defconfig b/configs/net2big_v2_defconfig
index d8b5f33..4589884 100644
--- a/configs/net2big_v2_defconfig
+++ b/configs/net2big_v2_defconfig
@@ -49,6 +49,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_KIRKWOOD_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
diff --git a/configs/netspace_lite_v2_defconfig b/configs/netspace_lite_v2_defconfig
index 5575373..9f9a982 100644
--- a/configs/netspace_lite_v2_defconfig
+++ b/configs/netspace_lite_v2_defconfig
@@ -49,6 +49,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_KIRKWOOD_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
diff --git a/configs/netspace_max_v2_defconfig b/configs/netspace_max_v2_defconfig
index 89eb20d..3a5eaca 100644
--- a/configs/netspace_max_v2_defconfig
+++ b/configs/netspace_max_v2_defconfig
@@ -49,6 +49,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_KIRKWOOD_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
diff --git a/configs/netspace_mini_v2_defconfig b/configs/netspace_mini_v2_defconfig
index 6e09985..167c836 100644
--- a/configs/netspace_mini_v2_defconfig
+++ b/configs/netspace_mini_v2_defconfig
@@ -47,6 +47,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_BLK=y
 CONFIG_KIRKWOOD_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
diff --git a/configs/netspace_v2_defconfig b/configs/netspace_v2_defconfig
index 6b08865..b6bf9d7 100644
--- a/configs/netspace_v2_defconfig
+++ b/configs/netspace_v2_defconfig
@@ -49,6 +49,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_KIRKWOOD_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig
index 1de3433..a6f7960 100644
--- a/configs/nsa310s_defconfig
+++ b/configs/nsa310s_defconfig
@@ -44,6 +44,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig
index c43418a..52f3784 100644
--- a/configs/omap5_uevm_defconfig
+++ b/configs/omap5_uevm_defconfig
@@ -47,6 +47,7 @@ CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_DM_ETH=y
 CONFIG_SCSI=y
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_CONS_INDEX=3
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
diff --git a/configs/pg_wcom_expu1_defconfig b/configs/pg_wcom_expu1_defconfig
index 8238ca8..8fae434 100644
--- a/configs/pg_wcom_expu1_defconfig
+++ b/configs/pg_wcom_expu1_defconfig
@@ -79,6 +79,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
 CONFIG_SYS_QE_FW_ADDR=0x60020000
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
diff --git a/configs/pg_wcom_expu1_update_defconfig b/configs/pg_wcom_expu1_update_defconfig
index 0fd5ebc..8c8173a 100644
--- a/configs/pg_wcom_expu1_update_defconfig
+++ b/configs/pg_wcom_expu1_update_defconfig
@@ -77,6 +77,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
 CONFIG_SYS_QE_FW_ADDR=0x60020000
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
diff --git a/configs/pg_wcom_seli8_defconfig b/configs/pg_wcom_seli8_defconfig
index 229535c..f9bd076 100644
--- a/configs/pg_wcom_seli8_defconfig
+++ b/configs/pg_wcom_seli8_defconfig
@@ -79,6 +79,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
 CONFIG_SYS_QE_FW_ADDR=0x60020000
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
diff --git a/configs/pg_wcom_seli8_update_defconfig b/configs/pg_wcom_seli8_update_defconfig
index fb5b715..84b0765 100644
--- a/configs/pg_wcom_seli8_update_defconfig
+++ b/configs/pg_wcom_seli8_update_defconfig
@@ -77,6 +77,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
 CONFIG_SYS_QE_FW_ADDR=0x60020000
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig
index dc211e3..0159cca 100644
--- a/configs/pogo_v4_defconfig
+++ b/configs/pogo_v4_defconfig
@@ -58,6 +58,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_KIRKWOOD_GPIO=y
 # CONFIG_MMC_HW_PARTITIONING is not set
 CONFIG_MVEBU_MMC=y
diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig
index e1aac61..d82c180 100644
--- a/configs/sandbox64_defconfig
+++ b/configs/sandbox64_defconfig
@@ -104,6 +104,7 @@ CONFIG_DEVRES=y
 CONFIG_DEBUG_DEVRES=y
 CONFIG_ADC=y
 CONFIG_ADC_SANDBOX=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_AXI=y
 CONFIG_AXI_SANDBOX=y
 CONFIG_SYS_IDE_MAXBUS=1
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index faa991d..3ca1f56 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -128,6 +128,7 @@ CONFIG_DEBUG_DEVRES=y
 CONFIG_SIMPLE_PM_BUS=y
 CONFIG_ADC=y
 CONFIG_ADC_SANDBOX=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_AXI=y
 CONFIG_AXI_SANDBOX=y
 CONFIG_SYS_IDE_MAXBUS=1
@@ -256,6 +257,9 @@ CONFIG_RESET_SCMI=y
 CONFIG_DM_RNG=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_RV8803=y
+CONFIG_SCSI_AHCI_PLAT=y
+CONFIG_SYS_SCSI_MAX_SCSI_ID=8
+CONFIG_SYS_SCSI_MAX_LUN=4
 CONFIG_SANDBOX_SERIAL=y
 CONFIG_SMEM=y
 CONFIG_SANDBOX_SMEM=y
@@ -265,6 +269,7 @@ CONFIG_SOUND_MAX98357A=y
 CONFIG_SOUND_SANDBOX=y
 CONFIG_SOC_DEVICE=y
 CONFIG_SANDBOX_SPI=y
+CONFIG_SCSI=y
 CONFIG_SPMI=y
 CONFIG_SPMI_SANDBOX=y
 CONFIG_SYSINFO=y
diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig
index 7bd5d01..d809712 100644
--- a/configs/sandbox_flattree_defconfig
+++ b/configs/sandbox_flattree_defconfig
@@ -84,6 +84,7 @@ CONFIG_DEVRES=y
 CONFIG_DEBUG_DEVRES=y
 CONFIG_ADC=y
 CONFIG_ADC_SANDBOX=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_AXI=y
 CONFIG_AXI_SANDBOX=y
 CONFIG_CLK=y
diff --git a/configs/sandbox_noinst_defconfig b/configs/sandbox_noinst_defconfig
index 3d47ea6..b288ac2 100644
--- a/configs/sandbox_noinst_defconfig
+++ b/configs/sandbox_noinst_defconfig
@@ -108,6 +108,7 @@ CONFIG_DEBUG_DEVRES=y
 # CONFIG_SPL_SIMPLE_BUS is not set
 CONFIG_ADC=y
 CONFIG_ADC_SANDBOX=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_AXI=y
 CONFIG_AXI_SANDBOX=y
 CONFIG_SYS_IDE_MAXBUS=1
diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
index 926c34c..cd1ad38 100644
--- a/configs/sandbox_spl_defconfig
+++ b/configs/sandbox_spl_defconfig
@@ -110,6 +110,7 @@ CONFIG_DEBUG_DEVRES=y
 # CONFIG_SPL_SIMPLE_BUS is not set
 CONFIG_ADC=y
 CONFIG_ADC_SANDBOX=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_AXI=y
 CONFIG_AXI_SANDBOX=y
 CONFIG_SYS_IDE_MAXBUS=1
diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig
index 599e6d6..a3f2ceb 100644
--- a/configs/sheevaplug_defconfig
+++ b/configs/sheevaplug_defconfig
@@ -47,6 +47,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_MVEBU_MMC=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
diff --git a/configs/theadorable_debug_defconfig b/configs/theadorable_debug_defconfig
index 061b740..5da67c1 100644
--- a/configs/theadorable_debug_defconfig
+++ b/configs/theadorable_debug_defconfig
@@ -55,6 +55,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_BOOTCOUNT_LIMIT=y
 CONFIG_BOOTCOUNT_RAM=y
 CONFIG_FPGA_ALTERA=y
diff --git a/configs/tools-only_defconfig b/configs/tools-only_defconfig
index 1f8e90a6..054e008 100644
--- a/configs/tools-only_defconfig
+++ b/configs/tools-only_defconfig
@@ -19,6 +19,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_NET is not set
 # CONFIG_ACPIGEN is not set
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_AXI=y
 CONFIG_AXI_SANDBOX=y
 CONFIG_SANDBOX_GPIO=y
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 1adf4dc..ce6907e 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -135,6 +135,16 @@ config SATA_SIL
 	  Enable this driver to support the SIL3131, SIL3132 and SIL3124
 	  SATA controllers.
 
+config SYS_SATA_MAX_DEVICE
+	int "Maximum number of SATA devices"
+	depends on !AHCI || FSL_SATA || SATA_MV
+	help
+	  Sets the maximum number of SATA devices which can be supported
+	  by U-Boot.
+
+	  This is only partially converted to driver model. See sata_bread()
+	  for example, which shows where the conversion needs to be completed.
+
 endif # SATA
 
 endmenu
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 3c826c9..c400e2d 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -16,3 +16,33 @@ config DM_SCSI
 	  which supports SCSI and SATA HDDs. For every device configuration
 	  (IDs/LUNs) a block device is created with RAW read/write and
 	  filesystem support.
+
+if SCSI && !DM_SCSI
+
+config SCSI_AHCI_PLAT
+	bool "Platform-specific init of AHCI"
+	help
+	  This enables a way for boards to set up an AHCI device manually, by
+	  called ahci_init() and providing an ahci_reset() mechanism.
+
+	  This is deprecated. An AHCI driver should be provided instead.
+
+config SYS_SCSI_MAX_SCSI_ID
+	int "Maximum supporedt SCSI ID"
+	default 1
+	help
+	  Sets the maximum number of SCSI IDs to scan when looking for devices.
+	  IDs from 0 to (this value - 1) are scanned.
+
+	  This is deprecated and is not needed when BLK is enabled.
+
+config SYS_SCSI_MAX_LUN
+	int "Maximum support SCSI LUN"
+	default 1
+	help
+	  Sets the maximum number of SCSI Logical Unit Numbers (LUNs) to scan on
+	  devices. LUNs from 0 to (this value - 1) are scanned.
+
+	  This is deprecated and is not needed when CONFIG_DM_SCSI is enabled.
+
+endif
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index e9f8486..25194ee 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -15,4 +15,6 @@ obj-$(CONFIG_SCSI) += scsi.o
 endif
 endif
 
+ifdef CONFIG_SCSI
 obj-$(CONFIG_SANDBOX) += sandbox_scsi.o
+endif
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 977d96a..538d9c2 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -275,7 +275,6 @@
 /*
  * SATA
  */
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1_OFFSET	0x18000
 #define CONFIG_SYS_SATA1	(CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 23b9969..106d1e6 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -544,7 +544,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_FSL_SATA_V2
 
 #ifdef CONFIG_FSL_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index ceaed46..e6d5321 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -349,7 +349,6 @@
 #define CONFIG_FSL_SATA_V2
 
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h
index ed88b41..8a0c703 100644
--- a/include/configs/P4080DS.h
+++ b/include/configs/P4080DS.h
@@ -11,7 +11,6 @@
 
 #define CONFIG_PCIE3
 
-#define CONFIG_SYS_SATA_MAX_DEVICE  2
 #define CONFIG_LBA48
 
 #define CONFIG_SYS_SRIO
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index f60010f..9433f14 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -438,7 +438,6 @@
 /* SATA */
 #define CONFIG_FSL_SATA_V2
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index f0bdcba..a41f9f0 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -488,7 +488,6 @@
  * SATA
  */
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 86dc5bf..7165ba0 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -443,7 +443,6 @@
  * SATA
  */
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 6923774..daccd81 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -180,7 +180,6 @@
 
 /* SATA */
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
@@ -466,7 +465,6 @@
 
 /* SATA */
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index e4e3872..ff0498a 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -48,11 +48,6 @@
 #define CONFIG_NET_RETRY_COUNT		10
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs longer aneg time at 1G */
 
-/* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-
 /*
  * Default to using SPI for environment, etc.
  * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index d5eacf1..871e87c 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -35,13 +35,6 @@
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
-/* SATA support */
-#ifdef CONFIG_SCSI
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#endif
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define RELOCATION_LIMITS_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 40bc821..c19aaac 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -160,7 +160,6 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
 
 /* SATA */
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_LBA48
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h
index 2c27a00..7fb96e8 100644
--- a/include/configs/controlcenterdc.h
+++ b/include/configs/controlcenterdc.h
@@ -18,13 +18,6 @@
  * U-Boot into it.
  */
 
-/*
- * SATA/SCSI/AHCI configuration
- */
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-
 /* Environment in SPI NOR flash */
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 6d272c6..bd26412 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -347,7 +347,6 @@
 
 /* SATA */
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index f5ea365..8dc73e8 100644
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -13,13 +13,6 @@
 /* I2C */
 #define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE
 
-/*
- * SATA/SCSI/AHCI configuration
- */
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-
 /* Environment in SPI NOR flash */
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index 449a567..7baae3b 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -28,7 +28,6 @@
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
 /* SATA support */
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_LBA48
 
 /* PCIe support */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index aec30c4..711e37c 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -74,9 +74,6 @@
 
 /* SPI SPL */
 
-/* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-
 /* NAND support */
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h
index beea234..0b3ee13 100644
--- a/include/configs/dreamplug.h
+++ b/include/configs/dreamplug.h
@@ -45,7 +45,6 @@
  * SATA Driver configuration
  */
 #ifdef CONFIG_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_LBA48
 #endif /* CONFIG_SATA */
 
diff --git a/include/configs/durian.h b/include/configs/durian.h
index ce9e57c..f0789d5 100644
--- a/include/configs/durian.h
+++ b/include/configs/durian.h
@@ -18,12 +18,6 @@
 /* PCI CONFIG */
 #define CONFIG_PCI_SCAN_SHOW
 
-/* SCSI */
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4
-#define CONFIG_SYS_SCSI_MAX_LUN 1
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SATA_MAX_DEVICE 4
-
 /* BOOT */
 #define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
 
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index bde14a7..402c5bf 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -21,7 +21,6 @@
 
 /* SATA Configs */
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h
index c279579..51e671a 100644
--- a/include/configs/goflexhome.h
+++ b/include/configs/goflexhome.h
@@ -48,7 +48,6 @@
 #endif
 
 /* SATA driver configuration */
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_LBA48
 
 #endif /* _CONFIG_GOFLEXHOME_H */
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 8f73c3b..668d00c 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -41,7 +41,6 @@
  * SATA Configs
  */
 #ifdef CONFIG_CMD_SATA
-  #define CONFIG_SYS_SATA_MAX_DEVICE	1
   #define CONFIG_DWC_AHSATA_PORT_ID	0
   #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
   #define CONFIG_LBA48
diff --git a/include/configs/helios4.h b/include/configs/helios4.h
index c1d42f1..151ab66 100644
--- a/include/configs/helios4.h
+++ b/include/configs/helios4.h
@@ -35,13 +35,6 @@
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
-/* SATA support */
-#ifdef CONFIG_SCSI
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#endif
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define RELOCATION_LIMITS_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 6d55974..55c874b 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -16,10 +16,6 @@
 
 #define CONFIG_SYS_BOOTCOUNT_LE		/* Use little-endian accessors */
 
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	5
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-
 #define CONFIG_BOOT_RETRY_TIME		-1
 #define CONFIG_RESET_TO_RETRY
 
diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h
index 7366a33..0a988e2 100644
--- a/include/configs/lacie_kw.h
+++ b/include/configs/lacie_kw.h
@@ -30,9 +30,6 @@
 #define CONFIG_LBA48
 #if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
 	defined(CONFIG_NET2BIG_V2)
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
-#else
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #endif
 #endif /* CONFIG_SATA */
 
diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h
index 1027431..0263bb8 100644
--- a/include/configs/ls1012a2g5rdb.h
+++ b/include/configs/ls1012a2g5rdb.h
@@ -14,13 +14,9 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
 
 /* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
 
 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
 
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
-
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"verify=no\0"				\
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index e33bafa..f92ff17 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -31,13 +31,9 @@
 #define CONFIG_SYS_FSL_QSPI_BASE	0x40000000
 
 /* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
 
 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
 
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
-
 /* I2C */
 
 /* GPIO */
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index c02be10..2e5b804 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -81,16 +81,12 @@
  */
 
 /* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI
 #define PCI_DEVICE_ID_FREESCALE_AHCI	0x0440
 #endif
 #define CONFIG_SCSI_DEV_LIST		{PCI_VENDOR_ID_FREESCALE, \
 	PCI_DEVICE_ID_FREESCALE_AHCI}
 
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-
 /* SPI */
 
 /*
diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index 2c50490..1b4d181 100644
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -72,11 +72,8 @@
 #endif
 
 /* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
 
 #define CONFIG_SYS_SATA1			AHCI_BASE_ADDR1
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
 #ifndef SPL_NO_ENV
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
index 653d2ac..0770f4e 100644
--- a/include/configs/ls1028ardb.h
+++ b/include/configs/ls1028ardb.h
@@ -57,12 +57,9 @@
 #endif
 
 /* SATA */
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
 #define SCSI_VEND_ID 0x1b4b
 #define SCSI_DEV_ID  0x9170
 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
-#define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SATA1                        AHCI_BASE_ADDR1
 
 /* Initial environment variables */
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 083e2e6..ea6831b 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -46,7 +46,6 @@
 #endif
 
 /* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
 
 /* EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_NXID
@@ -54,9 +53,6 @@
 
 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
 
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
-
 /*
  * IFC Definitions
  */
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 507d770..31b578a 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -234,8 +234,6 @@
 
 /* SATA */
 #ifndef SPL_NO_SATA
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		2
-#define CONFIG_SYS_SCSI_MAX_LUN			2
 #define SCSI_VEND_ID 0x1b4b
 #define SCSI_DEV_ID  0x9170
 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 15d4364..7552610 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -122,12 +122,7 @@
 
 /* SATA */
 #ifndef SPL_NO_SATA
-#define CONFIG_SCSI_AHCI_PLAT
-
 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
 #endif
 
 /* FMan ucode */
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index e9a9c64..33b70c8 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -128,11 +128,7 @@ unsigned long long get_qixis_addr(void);
 
 /* SATA */
 #ifdef CONFIG_SCSI
-#define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SATA1		AHCI_BASE_ADDR1
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
 #endif
 
 /* Physical Memory Map */
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 8b4ea49..7554de1 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -33,14 +33,10 @@
 #endif
 
 /* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
 
 #define CONFIG_SYS_SATA1			AHCI_BASE_ADDR1
 #define CONFIG_SYS_SATA2			AHCI_BASE_ADDR2
 
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
-
 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
 #define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128*1024*1024)
 #define CONFIG_SYS_NOR_AMASK_EARLY	IFC_AMASK(64*1024*1024)
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 1253698..1c05b08 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -43,14 +43,10 @@
 #endif
 
 /* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
 
 #define CONFIG_SYS_SATA1			AHCI_BASE_ADDR1
 #define CONFIG_SYS_SATA2			AHCI_BASE_ADDR2
 
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
-
 #if !defined(CONFIG_FSL_QSPI) || defined(CONFIG_TFABOOT)
 
 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index e8e02e7..7fa4f00 100644
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -96,7 +96,6 @@
 #endif /* CONFIG_CMD_NET */
 
 #ifdef CONFIG_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE 1
 #define CONFIG_SYS_64BIT_LBA
 #define CONFIG_LBA48
 #endif
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index eb88a57..e31f8d0 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -109,11 +109,8 @@
 /* SATA */
 
 #ifdef CONFIG_SCSI
-#define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SATA1		AHCI_BASE_ADDR1
 #define CONFIG_SYS_SATA2		AHCI_BASE_ADDR2
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
 #endif
 
 /* USB */
diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h
index 4a1d959..8486cf8 100644
--- a/include/configs/m53menlo.h
+++ b/include/configs/m53menlo.h
@@ -99,7 +99,6 @@
  * SATA
  */
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_BASE_ADDR
 #define CONFIG_LBA48
diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h
index c192512..fd9ce34 100644
--- a/include/configs/mvebu_armada-37xx.h
+++ b/include/configs/mvebu_armada-37xx.h
@@ -51,13 +51,9 @@
 /*
  * SATA/SCSI/AHCI configuration
  */
-#define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_LBA48
 #define CONFIG_SYS_64BIT_LBA
 
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 0) \
diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index 6a113ec..44bba65 100644
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -46,13 +46,9 @@
 /*
  * SATA/SCSI/AHCI configuration
  */
-#define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_LBA48
 #define CONFIG_SYS_64BIT_LBA
 
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-
 /*
  * PCI configuration
  */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 92140df..01ed221 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -125,7 +125,6 @@
 #define CONFIG_BOARD_SIZE_LIMIT		785408
 
 #ifdef CONFIG_CMD_SATA
-	#define CONFIG_SYS_SATA_MAX_DEVICE      1
 	#define CONFIG_DWC_AHSATA_PORT_ID       0
 	#define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
 	#define CONFIG_LBA48
diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index 7d3e651..1c25857 100644
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -18,7 +18,6 @@
 
 /* SATA Configuration */
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE      1
 #define CONFIG_DWC_AHSATA_PORT_ID       0
 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 1a1c08b..678b433 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -23,7 +23,6 @@
  * SATA Configs
  */
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h
index 8cc9ca6..ccf4519 100644
--- a/include/configs/nsa310s.h
+++ b/include/configs/nsa310s.h
@@ -32,7 +32,6 @@
 
 /* SATA driver configuration */
 #ifdef CONFIG_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_LBA48
 #endif /* CONFIG_SATA */
 
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index e9a9d50..75e84c3 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -49,8 +49,4 @@
 
 #define CONSOLEDEV		"ttyS2"
 
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-
 #endif /* __CONFIG_OMAP5_EVM_H */
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index b993ec8..92008cd 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -138,7 +138,6 @@
 #define CONFIG_PCIE1	/* PCIE controller 1 (slot 1) */
 #define CONFIG_PCIE2	/* PCIE controller 2 (slot 2) */
 
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_LBA48
 
 #define CONFIG_HWCONFIG
diff --git a/include/configs/pogo_v4.h b/include/configs/pogo_v4.h
index 568a936..f8555f6 100644
--- a/include/configs/pogo_v4.h
+++ b/include/configs/pogo_v4.h
@@ -43,11 +43,6 @@
 #endif
 
 /*
- *  SATA Driver configuration
- */
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
-
-/*
  * Support large disk for SATA and USB
  */
 #define CONFIG_SYS_64BIT_LBA
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index a352d6e..75efbf3 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -29,10 +29,4 @@
 #define CONFIG_SANDBOX_SDL
 #endif
 
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	8
-#define CONFIG_SYS_SCSI_MAX_LUN		4
-
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
-
 #endif
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index 8dba4fc..4499a63 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -46,7 +46,6 @@
  * SATA driver configuration
  */
 #ifdef CONFIG_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_LBA48
 #endif /* CONFIG_SATA */
 
diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h
index 30adfe9..0877646 100644
--- a/include/configs/sifive-unmatched.h
+++ b/include/configs/sifive-unmatched.h
@@ -32,8 +32,6 @@
 
 #define CONFIG_STANDALONE_LOAD_ADDR	0x80200000
 
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	4
-
 /* Environment options */
 
 #ifndef CONFIG_SPL_BUILD
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 58ccafc..065b406 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -40,7 +40,6 @@
 
 /* SATA */
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h
index 3c942cc..14817b1 100644
--- a/include/configs/theadorable.h
+++ b/include/configs/theadorable.h
@@ -41,7 +41,6 @@
 	"initrd_high=0x10000000\0"
 
 /* SATA support */
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_LBA48
 
 /* Enable LCD and reserve 512KB from top of memory*/
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 051c18c..80e8fe1 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -17,7 +17,6 @@
 /* SATA Configs */
 
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 7d8829e..6b21e39 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -722,7 +722,6 @@ CONFIG_SAR_REG
 CONFIG_SATA1
 CONFIG_SATA2
 CONFIG_SCIF_A
-CONFIG_SCSI_AHCI_PLAT
 CONFIG_SCSI_DEV_LIST
 CONFIG_SC_TIMER_CLK
 CONFIG_SDCARD
@@ -1846,7 +1845,6 @@ CONFIG_SYS_SATA2
 CONFIG_SYS_SATA2_FLAGS
 CONFIG_SYS_SATA2_OFFSET
 CONFIG_SYS_SATA_FAT_BOOT_PARTITION
-CONFIG_SYS_SATA_MAX_DEVICE
 CONFIG_SYS_SBFHDR_DATA_OFFSET
 CONFIG_SYS_SBFHDR_SIZE
 CONFIG_SYS_SCCR_SATACM
@@ -1854,8 +1852,6 @@ CONFIG_SYS_SCCR_TSEC1CM
 CONFIG_SYS_SCCR_TSEC2CM
 CONFIG_SYS_SCCR_USBDRCM
 CONFIG_SYS_SCR
-CONFIG_SYS_SCSI_MAX_LUN
-CONFIG_SYS_SCSI_MAX_SCSI_ID
 CONFIG_SYS_SDRAM
 CONFIG_SYS_SDRAM_BASE
 CONFIG_SYS_SDRAM_BASE0