Merge tag 'u-boot-imx-20201105' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx for 2021.1
---------------------

- new boards : GE (new B1x5v2), phytec phyCORE-i.MX8MM
- converted doc to reST
- fixes for verdin-imx8mm (Toradex)
- fixes for i.MX thermal driver
- mx7ulp: Align the PLL_USB frequency
- mx53: primary/secondary bmode

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/741465284

72 files changed, 6099 insertions, 535 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5362b73..5308713 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -770,6 +770,7 @@ dtb-$(CONFIG_ARCH_IMX8) += \
 dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mm-evk.dtb \
 	imx8mm-verdin.dtb \
+	phycore-imx8mm.dtb \
 	imx8mn-ddr4-evk.dtb \
 	imx8mq-evk.dtb \
 	imx8mm-beacon-kit.dtb \
@@ -983,6 +984,7 @@ dtb-$(CONFIG_TARGET_GE_BX50V3) += \
 	imx6q-b650v3.dtb \
 	imx6q-b450v3.dtb
 
+dtb-$(CONFIG_TARGET_GE_B1X5V2) += imx6dl-b1x5v2.dtb
 dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb
 
 dtb-$(CONFIG_TARGET_VEXPRESS_CA5X2) += vexpress-v2p-ca5s.dtb
diff --git a/arch/arm/dts/imx53-kp.dts b/arch/arm/dts/imx53-kp.dts
index 5f9e4fa..03e571d 100644
--- a/arch/arm/dts/imx53-kp.dts
+++ b/arch/arm/dts/imx53-kp.dts
@@ -131,6 +131,10 @@
 				MX53_PAD_GPIO_1__GPIO1_1 0x1e4
 				/* KEY1 GPIO */
 				MX53_PAD_EIM_RW__GPIO2_26 0x1e4
+				/* LED GREEN GPIO */
+				MX53_PAD_EIM_WAIT__GPIO5_0 0x1e4
+				/* LED RED GPIO */
+				MX53_PAD_EIM_D28__GPIO3_28 0x1e4
 			>;
 		};
 
diff --git a/arch/arm/dts/imx6dl-b1x5v2.dts b/arch/arm/dts/imx6dl-b1x5v2.dts
new file mode 100644
index 0000000..78baec1
--- /dev/null
+++ b/arch/arm/dts/imx6dl-b1x5v2.dts
@@ -0,0 +1,654 @@
+/*
+ * GE B1x5v2 Patient Monitor
+ *
+ * Copyright 2018-2020 GE Inc.
+ * Copyright 2018-2020 Collabora Ltd.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "ge,imx6dl-b1x5v2", "congatec,qmx6", "fsl,imx6dl";
+
+	chosen {
+		bootargs = "console=ttymxc2,115200";
+		stdout-path = &uart3;
+	};
+
+	reg_3p3v: 3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_5v0_audio: regulator-5v0-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "5V0_AUDIO";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v>;
+
+		gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		/*
+		 * This must be always-on for da7212, which has some not properly
+		 * documented dependencies for it's speaker supply pin. The issue
+		 * manifests as speaker volume being very low.
+		 */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "LED_VCC";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+
+		pinctrl-0 = <&pinctrl_q7_lcd_power>;
+		pinctrl-names = "default";
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; // LCDPWR
+		enable-active-high;
+	};
+
+	usb_power: regulator-usb-power {
+		compatible = "regulator-fixed";
+		regulator-name = "USB POWER";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_backlight_enable>;
+		power-supply = <&reg_lcd>;
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	panel {
+		compatible = "simple-panel";
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	bootcount {
+		compatible = "u-boot,bootcount-spi-flash";
+		spi-flash = <&flash>;
+		offset = <0x01003fe>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
+
+		alarm1 {
+			label = "alarm:red";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		alarm2 {
+			label = "alarm:yellow";
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		alarm3 {
+			label = "alarm:blue";
+			gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_spi_cs1>;
+		gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+		active-delay-ms = <1000>;
+		inactive-delay-ms = <0>;
+		timeout-ms = <5000>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2cmux>;
+		mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c2>;
+		idle-state = <1>;
+
+		i2c5: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tmp112: temperature-sensor@48 {
+				compatible = "ti,tmp112";
+				reg = <0x48>;
+				interrupt-parent = <&tca6424a>;
+				interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			tca6424a: gpio-controller@22 {
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&gpio7>;
+				interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_q7_gpio6>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				gpio-line-names = "GPIO_ROTOR#", "", "TMP_SENSOR_IRQ", "ACM_GPIO1", "ACM_GPIO2", "BATT_T", "", "",
+						  "ACM_GPIO3", "ACM_GPIO4", "USB1_POWER_EN", "EGPIO_CC_CTL0", "EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "",
+						  "SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL", "MARKER_EN", "EGPIO_TOUCH_RST", "", "";
+			};
+		};
+
+		i2c6: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pmic: pmic@08 {
+				compatible = "fsl,pfuze100";
+				reg = <0x08>;
+			};
+		};
+	};
+};
+
+&usbh1 {
+	/* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&usb_power>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&pmic {
+	regulators {
+		sw1a_reg: sw1ab {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1875000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-ramp-delay = <6250>;
+		};
+
+		sw1c_reg: sw1c {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1875000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-ramp-delay = <6250>;
+		};
+
+		sw2_reg: sw2 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		sw3a_reg: sw3a {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <1975000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		sw3b_reg: sw3b {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <1975000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		sw4_reg: sw4 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		swbst_reg: swbst {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5150000>;
+		};
+
+		snvs_reg: vsnvs {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vref_reg: vrefddr {
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		/* keep VGEN3, VGEN4 and VGEN5 enabled in order to maintain backward compatibility with hw-rev. A.0 */
+		vgen3_reg: vgen3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vgen4_reg: vgen4 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		vgen5_reg: vgen5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		/* supply voltage for eMMC */
+		vgen6_reg: vgen6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usdhc2 {
+	/* MicroSD card slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	/* eMMC module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	bus-width = <8>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+
+	clock-frequency = <100000>;
+
+	rtc: m41t62@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy>;
+	status = "okay";
+
+	fsl,magic-packet;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@6 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <6>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <2000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	num-cs = <1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,sst25vf032b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0000000 0x100000>;
+		};
+
+		partition@100000 {
+			label = "user";
+			reg = <0x0100000 0x2fc000>;
+		};
+
+		partition@3fc000 {
+			label = "reserved";
+			reg = <0x03fc000 0x4000>;
+			read-only;
+		};
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	imx6qdl-congatec-qmx6 {
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc2_cd: sd2cdgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c1_gpio: i2c1gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x1b0b0
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2_gpio: i2c2gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0
+				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3_gpio: i2c3gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x1b0b0
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x1b0b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			>;
+		};
+
+		pinctrl_phy_reset: phyrstgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x4001b0b0	/* RGMII Phy Reset */
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1		/* Q7[123] LVDS_BLT_CTRL */
+			>;
+		};
+
+		pinctrl_q7_lcd_power: lcdpwrgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x4001b0b0	/* Q7[111] LVDS_PPEN */
+			>;
+		};
+
+		pinctrl_q7_backlight_enable: blengrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0	/* Q7[112] LVDS_BLEN */
+			>;
+		};
+
+		pinctrl_q7_gpio1: q7gpio1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x4001b0b0	/* Q7[186] GPIO1 */
+			>;
+		};
+
+		pinctrl_q7_gpio3: q7gpio3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x4001b0b0	/* Q7[188] GPIO3 */
+			>;
+		};
+
+		pinctrl_q7_gpio5: q7gpio5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x4001b0b0	/* Q7[190] GPIO5 */
+			>;
+		};
+
+		pinctrl_q7_gpio6: q7gpio6grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0		/* Q7[191] GPIO6 */
+			>;
+		};
+
+		pinctrl_q7_spi_cs1: spics1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x4001b0b0	/* Q7[202] SPI_CS1# */
+			>;
+		};
+
+		pinctrl_i2cmux: i2cmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x4001b0b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059		/* Q7[92] USB_ID */
+			>;
+		};
+	};
+};
diff --git a/arch/arm/dts/phycore-imx8mm-u-boot.dtsi b/arch/arm/dts/phycore-imx8mm-u-boot.dtsi
new file mode 100644
index 0000000..fc0fa22
--- /dev/null
+++ b/arch/arm/dts/phycore-imx8mm-u-boot.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+};
+
+&{/soc@0} {
+	u-boot,dm-pre-reloc;
+	u-boot,dm-spl;
+};
+
+&clk {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	/delete-property/ assigned-clock-rates;
+};
+
+&osc_24m {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips1 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+	u-boot,dm-spl;
+};
+
+&aips3 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&uart3 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/phycore-imx8mm.dts b/arch/arm/dts/phycore-imx8mm.dts
new file mode 100644
index 0000000..c46d3c7
--- /dev/null
+++ b/arch/arm/dts/phycore-imx8mm.dts
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019-2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX8MM";
+	compatible = "phytec,imx8mm-phycore-som", "fsl,imx8mm";
+
+	chosen {
+		stdout-patch = &uart3;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+/* ethernet */
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	phy-reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+	phy-reset-duration = <1>;
+	phy-reset-post-delay = <1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			enet-phy-lane-no-swap;
+		};
+	};
+};
+
+/* i2c eeprom */
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	/* M24C32-D */
+	i2c_eeprom: eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		u-boot,i2c-offset-len = <2>;
+	};
+
+	/* M24C32-D Identification page */
+	i2c_eeprom_id: eeprom@59 {
+		compatible = "atmel,24c32";
+		reg = <0x59>;
+		u-boot,i2c-offset-len = <2>;
+	};
+};
+
+/* debug console */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* sd-card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+/* watchdog */
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1grp-gpio {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x1c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x1c3
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x49
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x49
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12        0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index 4a175cb..a4d8f10 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -223,12 +223,13 @@ int print_cpuinfo(void)
 		ret = thermal_get_temp(thermal_dev, &cpu_tmp);
 
 		if (!ret)
-			printf(" at %dC\n", cpu_tmp);
+			printf(" at %dC", cpu_tmp);
 		else
 			debug(" - invalid sensor data\n");
 	} else {
 		debug(" - invalid sensor device\n");
 	}
+	puts("\n");
 #endif
 
 	printf("Reset cause: %s\n", get_reset_cause());
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index 7771fc8..8615dc3 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -72,6 +72,11 @@ config TARGET_IMX8MM_BEACON
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
+config TARGET_PHYCORE_IMX8MM
+	bool "PHYTEC PHYCORE i.MX8MM"
+	select IMX8MM
+        select SUPPORT_SPL
+	select IMX8M_LPDDR4
 endchoice
 
 source "board/freescale/imx8mq_evk/Kconfig"
@@ -82,5 +87,6 @@ source "board/google/imx8mq_phanbell/Kconfig"
 source "board/technexion/pico-imx8mq/Kconfig"
 source "board/toradex/verdin-imx8mm/Kconfig"
 source "board/beacon/imx8mm/Kconfig"
+source "board/phytec/phycore_imx8mm/Kconfig"
 
 endif
diff --git a/arch/arm/mach-imx/mx5/soc.c b/arch/arm/mach-imx/mx5/soc.c
index c61fcce..47f531d 100644
--- a/arch/arm/mach-imx/mx5/soc.c
+++ b/arch/arm/mach-imx/mx5/soc.c
@@ -87,10 +87,27 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
 #endif
 
 #ifdef CONFIG_MX53
+#define IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT	BIT(30)
+
 void boot_mode_apply(unsigned cfg_val)
 {
-	writel(cfg_val, &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr);
+	void *lpgr = &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr;
+
+	if (cfg_val == MAKE_CFGVAL_PRIMARY_BOOT)
+		clrbits_le32(lpgr, IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT);
+	else if (cfg_val == MAKE_CFGVAL_SECONDARY_BOOT)
+		setbits_le32(lpgr, IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT);
+	else
+		writel(cfg_val, lpgr);
+}
+
+int boot_mode_getprisec(void)
+{
+	void *lpgr = &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr;
+
+	return !!(readl(lpgr) & IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT);
 }
+
 /*
  * cfg_val will be used for
  * Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
@@ -112,6 +129,8 @@ const struct boot_mode soc_boot_modes[] = {
 	{"esdhc2",	MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)},
 	{"esdhc3",	MAKE_CFGVAL(0x40, 0x20, 0x10, 0x12)},
 	{"esdhc4",	MAKE_CFGVAL(0x40, 0x20, 0x18, 0x12)},
+	{"primary",	MAKE_CFGVAL_PRIMARY_BOOT},
+	{"secondary",	MAKE_CFGVAL_SECONDARY_BOOT},
 	{NULL,		0},
 };
 #endif
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 3d72517..0646b73 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -253,6 +253,14 @@ config TARGET_GE_BX50V3
 	depends on MX6Q
 	select BOARD_LATE_INIT
 
+config TARGET_GE_B1X5V2
+	bool "General Electric B1x5v2"
+	depends on MX6QDL
+	select BOARD_LATE_INIT
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL
+
 config TARGET_GW_VENTANA
 	bool "gw_ventana"
 	depends on MX6QDL
@@ -713,6 +721,7 @@ config SYS_SOC
 	default "mx6"
 
 source "board/ge/bx50v3/Kconfig"
+source "board/ge/b1x5v2/Kconfig"
 source "board/advantech/dms-ba16/Kconfig"
 source "board/aristainetos/Kconfig"
 source "board/armadeus/opos6uldev/Kconfig"
diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c
index fb5e5b6..cb9d629 100644
--- a/arch/arm/mach-imx/mx6/clock.c
+++ b/arch/arm/mach-imx/mx6/clock.c
@@ -1341,7 +1341,7 @@ int do_mx6_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
 }
 
 #if defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) || defined(CONFIG_MX6DL) || \
-	defined(CONFIG_MX6S)
+	defined(CONFIG_MX6S) || defined(CONFIG_MX6QDL)
 static void disable_ldb_di_clock_sources(void)
 {
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c
index a636107..f43a246 100644
--- a/arch/arm/mach-imx/mx6/soc.c
+++ b/arch/arm/mach-imx/mx6/soc.c
@@ -26,6 +26,9 @@
 #include <imx_thermal.h>
 #include <mmc.h>
 
+#define has_err007805() \
+	(is_mx6sl() || is_mx6dl() || is_mx6solo() || is_mx6ull())
+
 struct scu_regs {
 	u32	ctrl;
 	u32	config;
@@ -469,7 +472,7 @@ int arch_cpu_init(void)
 	}
 
 	/* Set perclk to source from OSC 24MHz */
-	if (is_mx6sl())
+	if (has_err007805())
 		setbits_le32(&ccm->cscmr1, MXC_CCM_CSCMR1_PER_CLK_SEL_MASK);
 
 	imx_wdog_disable_powerdown(); /* Disable PDE bit of WMCR register */
diff --git a/arch/arm/mach-imx/mx7ulp/clock.c b/arch/arm/mach-imx/mx7ulp/clock.c
index a987ff2..51aaa50 100644
--- a/arch/arm/mach-imx/mx7ulp/clock.c
+++ b/arch/arm/mach-imx/mx7ulp/clock.c
@@ -333,7 +333,7 @@ void hab_caam_clock_enable(unsigned char enable)
 int do_mx7_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
 		      char *const argv[])
 {
-	u32 addr = 0;
+
 	u32 freq;
 	freq = decode_pll(PLL_A7_SPLL);
 	printf("PLL_A7_SPLL    %8d MHz\n", freq / 1000000);
@@ -342,7 +342,7 @@ int do_mx7_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
 	printf("PLL_A7_APLL    %8d MHz\n", freq / 1000000);
 
 	freq = decode_pll(PLL_USB);
-	printf("PLL_USB    %8d MHz\n", freq / 1000000);
+	printf("PLL_USB        %8d MHz\n", freq / 1000000);
 
 	printf("\n");
 
@@ -356,8 +356,6 @@ int do_mx7_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
 	printf("USDHC2     %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
 	printf("I2C4       %8d kHz\n", mxc_get_clock(MXC_I2C_CLK) / 1000);
 
-	addr = (u32) clock_init;
-	printf("[%s] addr = 0x%08X\r\n", __func__, addr);
 	scg_a7_info();
 
 	return 0;
diff --git a/board/freescale/imx8mm_evk/README b/board/freescale/imx8mm_evk/README
deleted file mode 100644
index fa3f079..0000000
--- a/board/freescale/imx8mm_evk/README
+++ /dev/null
@@ -1,37 +0,0 @@
-U-Boot for the NXP i.MX8MM EVK board
-
-Quick Start
-===========
-- Build the ARM Trusted firmware binary
-- Get ddr firmware
-- Build U-Boot
-- Boot
-
-Get and Build the ARM Trusted firmware
-======================================
-Note: builddir is U-Boot build directory (source directory for in-tree builds)
-Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
-branch: imx_4.19.35_1.0.0
-$ make PLAT=imx8mm bl31
-$ cp build/imx8mm/release/bl31.bin $(builddir)
-
-Get the ddr firmware
-=============================
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
-$ chmod +x firmware-imx-8.0.bin
-$ ./firmware-imx-8.0
-$ cp firmware-imx-8.0/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
-
-Build U-Boot
-============
-$ export CROSS_COMPILE=aarch64-poky-linux-
-$ make imx8mm_evk_defconfig
-$ export ATF_LOAD_ADDR=0x920000
-$ make flash.bin
-
-Burn the flash.bin to MicroSD card offset 33KB
-$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33
-
-Boot
-====
-Set Boot switch to SD boot
diff --git a/board/freescale/imx8mn_evk/README b/board/freescale/imx8mn_evk/README
deleted file mode 100644
index ff3d15c..0000000
--- a/board/freescale/imx8mn_evk/README
+++ /dev/null
@@ -1,37 +0,0 @@
-U-Boot for the NXP i.MX8MN EVK board
-
-Quick Start
-===========
-- Build the ARM Trusted firmware binary
-- Get firmware-imx package
-- Build U-Boot
-- Boot
-
-Get and Build the ARM Trusted firmware
-======================================
-Note: srctree is U-Boot source directory
-Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
-branch: imx_4.19.35_1.1.0
-$ make PLAT=imx8mn bl31
-$ cp build/imx8mn/release/bl31.bin $(srctree)
-
-Get the ddr firmware
-=============================
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.5.bin
-$ chmod +x firmware-imx-8.5.bin
-$ ./firmware-imx-8.5
-$ cp firmware-imx-8.5/firmware/ddr/synopsys/ddr4*.bin $(srctree)
-
-Build U-Boot
-============
-$ export CROSS_COMPILE=aarch64-poky-linux-
-$ make imx8mn_ddr4_evk_defconfig
-$ export ATF_LOAD_ADDR=0x960000
-$ make flash.bin
-
-Burn the flash.bin to MicroSD card offset 32KB
-$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32
-
-Boot
-====
-Set Boot switch to SD boot
diff --git a/board/freescale/imx8mp_evk/README b/board/freescale/imx8mp_evk/README
deleted file mode 100644
index 7dd3a93..0000000
--- a/board/freescale/imx8mp_evk/README
+++ /dev/null
@@ -1,41 +0,0 @@
-U-Boot for the NXP i.MX8MP EVK board
-
-Quick Start
-===========
-- Build the ARM Trusted firmware binary
-- Get the firmware-imx package
-- Build U-Boot
-- Boot
-
-Get and Build the ARM Trusted firmware
-======================================
-Note: $(srctree) is the U-Boot source directory
-Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
-branch: imx_5.4.3_2.0.0
-$ make PLAT=imx8mp bl31
-$ sudo cp build/imx8mp/release/bl31.bin $(srctree)
-
-Get the ddr firmware
-====================
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.7.bin
-$ chmod +x firmware-imx-8.7.bin
-$ ./firmware-imx-8.7
-$ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_1d_dmem.bin
-$ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_201904.bin $(srctree)/lpddr4_pmu_train_1d_imem.bin
-$ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_2d_dmem.bin
-$ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_201904.bin $(srctree)/lpddr4_pmu_train_2d_imem.bin
-
-Build U-Boot
-============
-$ export CROSS_COMPILE=aarch64-poky-linux-
-$ make imx8mp_evk_defconfig
-$ export ATF_LOAD_ADDR=0x960000
-$ make flash.bin
-
-Burn the flash.bin to the MicroSD card at offset 32KB
-$sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=32; sync
-
-Boot
-====
-Set Boot switch to SD boot
-Use /dev/ttyUSB2 for U-Boot console
diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README
deleted file mode 100644
index 859f852..0000000
--- a/board/freescale/imx8mq_evk/README
+++ /dev/null
@@ -1,37 +0,0 @@
-U-Boot for the NXP i.MX8MQ EVK board
-
-Quick Start
-===========
-- Build the ARM Trusted firmware binary
-- Get ddr and hdmi fimware
-- Build U-Boot
-- Boot
-
-Get and Build the ARM Trusted firmware
-======================================
-Note: srctree is U-Boot source directory
-Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
-branch: imx_4.19.35_1.0.0
-$ make PLAT=imx8mq bl31
-$ cp build/imx8mq/release/bl31.bin $(builddir)
-
-Get the ddr and hdmi firmware
-=============================
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
-$ chmod +x firmware-imx-7.9.bin
-$ ./firmware-imx-7.9.bin
-$ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
-$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
-
-Build U-Boot
-============
-$ export CROSS_COMPILE=aarch64-poky-linux-
-$ make imx8mq_evk_defconfig
-$ make flash.bin
-
-Burn the flash.bin to MicroSD card offset 33KB
-$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33
-
-Boot
-====
-Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
diff --git a/board/freescale/imx8qxp_mek/README b/board/freescale/imx8qxp_mek/README
deleted file mode 100644
index 6e4eb59..0000000
--- a/board/freescale/imx8qxp_mek/README
+++ /dev/null
@@ -1,50 +0,0 @@
-U-Boot for the NXP i.MX8QXP EVK board
-
-Quick Start
-===========
-
-- Build the ARM Trusted firmware binary
-- Get scfw_tcm.bin and ahab-container.img
-- Build U-Boot
-- Flash the binary into the SD card
-- Boot
-
-Get and Build the ARM Trusted firmware
-======================================
-
-$ git clone https://source.codeaurora.org/external/imx/imx-atf
-$ cd imx-atf/
-$ git checkout origin/imx_4.19.35_1.1.0 -b imx_4.19.35_1.1.0
-$ make PLAT=imx8qx bl31
-
-Get scfw_tcm.bin and ahab-container.img
-==============================
-
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.2.7.1.bin
-$ chmod +x imx-sc-firmware-1.2.7.1.bin
-$ ./imx-sc-firmware-1.2.7.1.bin
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-2.3.1.bin
-$ chmod +x imx-seco-2.3.1.bin
-$ ./imx-seco-2.3.1.bin
-
-Copy the following binaries to U-Boot folder:
-
-$ cp imx-atf/build/imx8qx/release/bl31.bin .
-$ cp imx-seco-2.3.1/firmware/seco/mx8qx-ahab-container.img ./ahab-container.img
-$ cp imx-sc-firmware-1.2.7.1/mx8qx-mek-scfw-tcm.bin	.
-
-Build U-Boot
-============
-$ make imx8qxp_mek_defconfig
-$ make flash.bin
-
-Flash the binary into the SD card
-=================================
-
-Burn the flash.bin binary to SD card offset 32KB:
-
-$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32
-
-Boot
-====
-Set Boot switch SW2: 1100.
diff --git a/board/freescale/imxrt1020-evk/README b/board/freescale/imxrt1020-evk/README
deleted file mode 100644
index abee7ca..0000000
--- a/board/freescale/imxrt1020-evk/README
+++ /dev/null
@@ -1,31 +0,0 @@
-How to use U-Boot on NXP i.MXRT1020 EVK
------------------------------------------------
-
-- Build U-Boot for i.MXRT1020 EVK:
-
-$ make mrproper
-$ make imxrt1020-evk_defconfig
-$ make
-
-This will generate the SPL image called SPL and the u-boot.img.
-
-- Flash the SPL image into the micro SD card:
-
-sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync
-
-- Flash the u-boot.img image into the micro SD card:
-
-sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128; sync
-
-- Jumper settings:
-
-SW8: 0 1 1 0
-
-where 0 means bottom position and 1 means top position (from the
-switch label numbers reference).
-
-- Connect the USB cable between the EVK and the PC for the console.
-(The USB console connector is the one close the ethernet connector)
-
-- Insert the micro SD card in the board, power it up and U-Boot messages should
-come up.
diff --git a/board/freescale/imxrt1050-evk/README b/board/freescale/imxrt1050-evk/README
deleted file mode 100644
index a7e68fa..0000000
--- a/board/freescale/imxrt1050-evk/README
+++ /dev/null
@@ -1,31 +0,0 @@
-How to use U-Boot on NXP i.MXRT1050 EVK
------------------------------------------------
-
-- Build U-Boot for i.MXRT1050 EVK:
-
-$ make mrproper
-$ make imxrt1050-evk_defconfig
-$ make
-
-This will generate the SPL image called SPL and the u-boot.img.
-
-- Flash the SPL image into the micro SD card:
-
-sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync
-
-- Flash the u-boot.img image into the micro SD card:
-
-sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128; sync
-
-- Jumper settings:
-
-SW7: 1 0 1 0
-
-where 0 means bottom position and 1 means top position (from the
-switch label numbers reference).
-
-- Connect the USB cable between the EVK and the PC for the console.
-(The USB console connector is the one close the ethernet connector)
-
-- Insert the micro SD card in the board, power it up and U-Boot messages should
-come up.
diff --git a/board/freescale/mx6sabreauto/README b/board/freescale/mx6sabreauto/README
deleted file mode 100644
index 4c0fda1..0000000
--- a/board/freescale/mx6sabreauto/README
+++ /dev/null
@@ -1,82 +0,0 @@
-How to use and build U-Boot on mx6sabreauto
--------------------------------------------
-
-mx6sabreauto_defconfig target supports mx6q/mx6dl/mx6qp sabreauto variants.
-
-In order to build it:
-
-$ make mx6sabreauto_defconfig
-
-$ make
-
-This will generate the SPL and u-boot-dtb.img binaries.
-
-- Flash the SPL binary into the SD card:
-
-$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
-
-- Flash the u-boot-dtb.img binary into the SD card:
-
-$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync
-
-Booting via Falcon mode
------------------------
-
-Write in mx6sabreauto_defconfig the following define below:
-
-CONFIG_SPL_OS_BOOT=y
-
-In order to build it:
-
-$ make mx6sabreauto_defconfig
-
-$ make
-
-This will generate the SPL image called SPL and the u-boot-dtb.img.
-
-- Flash the SPL image into the SD card:
-
-$ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 && sync
-
-- Flash the u-boot-dtb.img image into the SD card:
-
-$ sudo dd if=u-boot-dtb.img of=/dev/sdb bs=1K seek=69 && sync
-
-Create a FAT16 boot partition to store uImage and the dtb file, then copy the files there:
-
-$ sudo cp uImage /media/boot
-
-$ sudo cp imx6dl-sabreauto.dtb /media/boot
-
-Create a partition for root file system and extract it there:
-
-$ sudo tar xvf rootfs.tar.gz -C /media/root
-
-The SD card must have enough space for raw "args" and "kernel".
-To configure Falcon mode for the first time, on U-Boot do the following commands:
-
-- Load dtb file from boot partition:
-
-# load mmc 0:1 ${fdt_addr} imx6dl-sabreauto.dtb
-
-- Load kernel image from boot partition:
-
-# load mmc 0:1 ${loadaddr} uImage
-
-- Write kernel at 2MB offset:
-
-# mmc write ${loadaddr} 0x1000 0x4000
-
-- Setup kernel bootargs:
-
-# setenv bootargs "console=ttymxc3,115200 root=/dev/mmcblk0p1 rootfstype=ext4 rootwait quiet rw"
-
-- Prepare args:
-
-# spl export fdt ${loadaddr} - ${fdt_addr}
-
-- Write args 1MB data (0x800 sectors) to 1MB offset (0x800 sectors)
-
-# mmc write 18000000 0x800 0x800
-
-- Restart the board and then SPL binary will launch the kernel directly.
diff --git a/board/freescale/mx6sabresd/README b/board/freescale/mx6sabresd/README
deleted file mode 100644
index 4ea4454..0000000
--- a/board/freescale/mx6sabresd/README
+++ /dev/null
@@ -1,114 +0,0 @@
-How to use and build U-Boot on mx6sabresd
------------------------------------------
-
-The following methods can be used for booting mx6sabresd boards:
-
-1. Booting from SD card
-
-2. Booting from eMMC
-
-3. Booting via Falcon mode (SPL launches the kernel directly)
-
-
-1. Booting from SD card via SPL
--------------------------------
-
-mx6sabresd_defconfig target supports mx6q/mx6dl/mx6qp sabresd variants.
-
-In order to build it:
-
-$ make mx6sabresd_defconfig
-
-$ make
-
-This will generate the SPL and u-boot-dtb.img binaries.
-
-- Flash the SPL binary into the SD card:
-
-$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
-
-- Flash the u-boot-dtb.img binary into the SD card:
-
-$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync
-
-
-2. Booting from eMMC
---------------------
-
-$ make mx6sabresd_defconfig
-
-$ make
-
-This will generate the SPL and u-boot-dtb.img binaries.
-
-- Boot first from SD card as shown in the previous section
-
-In U-boot change the eMMC partition config:
-
-=> mmc partconf 2 1 0 0
-
-Mount the eMMC in the host PC:
-
-=> ums 0 mmc 2
-
-- Flash SPL and u-boot-dtb.img binaries into the eMMC:
-
-$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
-$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync
-
-Set SW6 to eMMC 8-bit boot: 11010110
-
-
-3. Booting via Falcon mode
---------------------------
-
-$ make mx6sabresd_defconfig
-$ make
-
-This will generate the SPL image called SPL and the u-boot-dtb.img.
-
-- Flash the SPL image into the SD card:
-
-$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none && sync
-
-- Flash the u-boot-dtb.img image into the SD card:
-
-$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none && sync
-
-Create a partition for root file system and extract it there:
-
-$ sudo tar xvf rootfs.tar.gz -C /media/root
-
-The SD card must have enough space for raw "args" and "kernel".
-To configure Falcon mode for the first time, on U-Boot do the following commands:
-
-- Setup the IP server:
-
-# setenv serverip <server_ip_address>
-
-- Download dtb file:
-
-# dhcp ${fdt_addr} imx6q-sabresd.dtb
-
-- Download kernel image:
-
-# dhcp ${loadaddr} uImage
-
-- Write kernel at 2MB offset:
-
-# mmc write ${loadaddr} 0x1000 0x4000
-
-- Setup kernel bootargs:
-
-# setenv bootargs "console=ttymxc0,115200 root=/dev/mmcblk1p1 rootfstype=ext4 rootwait quiet rw"
-
-- Prepare args:
-
-# spl export fdt ${loadaddr} - ${fdt_addr}
-
-- Write args 1MB data (0x800 sectors) to 1MB offset (0x800 sectors)
-
-# mmc write 18000000 0x800 0x800
-
-- Press KEY_VOL_UP key, power up the board and then SPL binary will
-launch the kernel directly.
diff --git a/board/ge/b1x5v2/Kconfig b/board/ge/b1x5v2/Kconfig
new file mode 100644
index 0000000..80a5bca
--- /dev/null
+++ b/board/ge/b1x5v2/Kconfig
@@ -0,0 +1,14 @@
+if TARGET_GE_B1X5V2
+
+config SYS_BOARD
+	default "b1x5v2"
+
+config SYS_VENDOR
+	default "ge"
+
+config SYS_CONFIG_NAME
+	default "ge_b1x5v2"
+
+source "board/ge/common/Kconfig"
+
+endif
diff --git a/board/ge/b1x5v2/MAINTAINERS b/board/ge/b1x5v2/MAINTAINERS
new file mode 100644
index 0000000..f22d492
--- /dev/null
+++ b/board/ge/b1x5v2/MAINTAINERS
@@ -0,0 +1,9 @@
+GE B1X5V2 BOARD
+M:	Huan 'Kitty' Wang <HuanWang@ge.com>
+M:	Ian Ray <ian.ray@ge.com>
+M:	Sebastian Reichel <sebastian.reichel@collabora.com>
+S:	Maintained
+F:	arch/arm/dts/imx6dl-b1x5v2.dts
+F:	board/ge/b1x5v2/
+F:	configs/ge_b1x5v2_defconfig
+F:	include/configs/ge_b1x5v2.h
diff --git a/board/ge/b1x5v2/Makefile b/board/ge/b1x5v2/Makefile
new file mode 100644
index 0000000..8a27af5
--- /dev/null
+++ b/board/ge/b1x5v2/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2018-2020 Collabora
+# Copyright 2018-2020 GE
+
+obj-y :=  b1x5v2.o spl.o
diff --git a/board/ge/b1x5v2/b1x5v2.c b/board/ge/b1x5v2/b1x5v2.c
new file mode 100644
index 0000000..1cb347f
--- /dev/null
+++ b/board/ge/b1x5v2/b1x5v2.c
@@ -0,0 +1,698 @@
+/*
+ * GE B105v2, B125v2, B155v2
+ *
+ * Copyright 2018-2020 GE Inc.
+ * Copyright 2018-2020 Collabora Ltd.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/mach-imx/video.h>
+#include <command.h>
+#include <common.h>
+#include <i2c.h>
+#include <input.h>
+#include <ipu_pixfmt.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <malloc.h>
+#include <miiphy.h>
+#include <micrel.h>
+#include <netdev.h>
+#include <panel.h>
+#include <rtc.h>
+#include <spi_flash.h>
+#include <version.h>
+
+#include "../common/vpd_reader.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SPL_BUILD
+
+#define B1X5V2_GE_VPD_OFFSET	0x0100000
+#define B1X5V2_GE_VPD_SIZE	1022
+
+#define VPD_TYPE_INVALID	0x00
+#define VPD_BLOCK_NETWORK	0x20
+#define VPD_BLOCK_HWID		0x44
+#define VPD_MAC_ADDRESS_LENGTH	6
+
+#define VPD_FLAG_VALID_MAC	BIT(1)
+
+#define AR8035_PHY_ID			0x004dd072
+#define AR8035_PHY_DEBUG_ADDR_REG	0x1d
+#define AR8035_PHY_DEBUG_DATA_REG	0x1e
+#define AR8035_HIB_CTRL_REG		0xb
+#define AR8035_HIBERNATE_EN		(1 << 15)
+
+static struct vpd_cache {
+	bool is_read;
+	u8 product_id;
+	unsigned char mac[VPD_MAC_ADDRESS_LENGTH];
+	u32 flags;
+} vpd;
+
+enum product_type {
+	PRODUCT_TYPE_B105V2 = 6,
+	PRODUCT_TYPE_B105PV2 = 7,
+	PRODUCT_TYPE_B125V2 = 8,
+	PRODUCT_TYPE_B125PV2 = 9,
+	PRODUCT_TYPE_B155V2 = 10,
+
+	PRODUCT_TYPE_INVALID = 0,
+};
+
+int dram_init(void) {
+	gd->ram_size = imx_ddr_size();
+	return 0;
+}
+
+int power_init_board(void)
+{
+	/* all required PMIC configuration happens via DT */
+	return 0;
+}
+
+static int disable_phy_hibernation(struct phy_device *phydev)
+{
+	unsigned short val;
+
+	if (phydev->drv->uid == AR8035_PHY_ID) {
+		/* Disable hibernation, other configuration has been done by PHY driver */
+		phy_write(phydev, MDIO_DEVAD_NONE, AR8035_PHY_DEBUG_ADDR_REG, AR8035_HIB_CTRL_REG);
+		val = phy_read(phydev, MDIO_DEVAD_NONE, AR8035_PHY_DEBUG_DATA_REG);
+		val &= ~AR8035_HIBERNATE_EN;
+		phy_write(phydev, MDIO_DEVAD_NONE, AR8035_PHY_DEBUG_DATA_REG, val);
+	} else {
+		printf("Unknown PHY: %08x\n", phydev->drv->uid);
+	}
+
+	return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+
+	disable_phy_hibernation(phydev);
+
+	return 0;
+}
+
+static int auo_g101evn01_detect(const struct display_info_t *info)
+{
+	char *dev = env_get("devicetype");
+	return !strcmp(dev, "B105v2") || !strcmp(dev, "B105Pv2");
+}
+
+static int auo_g121ean01_detect(const struct display_info_t *info)
+{
+	char *dev = env_get("devicetype");
+	return !strcmp(dev, "B125v2") || !strcmp(dev, "B125Pv2");;
+}
+
+static int auo_g156xtn01_detect(const struct display_info_t *info)
+{
+	char *dev = env_get("devicetype");
+	return !strcmp(dev, "B155v2");
+}
+
+static void b1x5v2_backlight_enable(int percent)
+{
+	struct udevice *panel;
+	int ret;
+
+	ret = uclass_get_device(UCLASS_PANEL, 0, &panel);
+	if (ret) {
+		printf("Could not find panel: %d\n", ret);
+		return;
+	}
+
+	panel_set_backlight(panel, percent);
+	panel_enable_backlight(panel);
+
+}
+
+static void lcd_enable(const struct display_info_t *info)
+{
+	printf("Enable backlight...\n");
+	b1x5v2_backlight_enable(100);
+}
+
+struct display_info_t const displays[] = {
+{
+	.di = 0,
+	.bus = -1,
+	.addr = -1,
+	.pixfmt = IPU_PIX_FMT_RGB24,
+	.detect = auo_g156xtn01_detect,
+	.enable = lcd_enable,
+	.mode = {
+		.name = "AUO G156XTN01",
+		.refresh = 60,
+		.xres = 1368, /* because of i.MX6 limitation, actually 1366 */
+		.yres = 768,
+		.pixclock = 13158, /* 76 MHz in ps */
+		.left_margin = 33,
+		.right_margin = 67,
+		.upper_margin = 4,
+		.lower_margin = 4,
+		.hsync_len = 94,
+		.vsync_len = 30,
+		.sync = FB_SYNC_EXT,
+		.vmode = FB_VMODE_NONINTERLACED
+	}
+},
+{
+	.di = 0,
+	.bus = -1,
+	.addr = -1,
+	.pixfmt = IPU_PIX_FMT_RGB24,
+	.detect = auo_g121ean01_detect,
+	.enable = lcd_enable,
+	.mode = {
+		.name = "AUO G121EAN01.4",
+		.refresh = 60,
+		.xres = 1280,
+		.yres = 800,
+		.pixclock = 14992, /* 66.7 MHz in ps */
+		.left_margin = 8,
+		.right_margin = 58,
+		.upper_margin = 6,
+		.lower_margin = 4,
+		.hsync_len = 70,
+		.vsync_len = 10,
+		.sync = FB_SYNC_EXT,
+		.vmode = FB_VMODE_NONINTERLACED
+	}
+},
+{
+	.di = 0,
+	.bus = -1,
+	.addr = -1,
+	.pixfmt = IPU_PIX_FMT_RGB24,
+	.detect = auo_g101evn01_detect,
+	.enable = lcd_enable,
+	.mode = {
+		.name = "AUO G101EVN01.3",
+		.refresh = 60,
+		.xres = 1280,
+		.yres = 800,
+		.pixclock = 14992, /* 66.7 MHz in ps */
+		.left_margin = 8,
+		.right_margin = 58,
+		.upper_margin = 6,
+		.lower_margin = 4,
+		.hsync_len = 70,
+		.vsync_len = 10,
+		.sync = FB_SYNC_EXT,
+		.vmode = FB_VMODE_NONINTERLACED
+	}
+}
+};
+size_t display_count = ARRAY_SIZE(displays);
+
+static void enable_videopll(void)
+{
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	s32 timeout = 100000;
+
+	setbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);
+
+	/* PLL_VIDEO  455MHz (24MHz * (37+11/12) / 2)
+	 *   |
+	 * PLL5
+	 *   |
+	 * CS2CDR[LDB_DI0_CLK_SEL]
+	 *   |
+	 *   +----> LDB_DI0_SERIAL_CLK_ROOT
+	 *   |
+	 *   +--> CSCMR2[LDB_DI0_IPU_DIV] --> LDB_DI0_IPU  455 / 7 = 65 MHz
+	 */
+
+	clrsetbits_le32(&ccm->analog_pll_video,
+			BM_ANADIG_PLL_VIDEO_DIV_SELECT |
+			BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT,
+			BF_ANADIG_PLL_VIDEO_DIV_SELECT(37) |
+			BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(1));
+
+	writel(BF_ANADIG_PLL_VIDEO_NUM_A(11), &ccm->analog_pll_video_num);
+	writel(BF_ANADIG_PLL_VIDEO_DENOM_B(12), &ccm->analog_pll_video_denom);
+
+	clrbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);
+
+	while (timeout--)
+		if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
+			break;
+
+	if (timeout < 0)
+		printf("Warning: video pll lock timeout!\n");
+
+	clrsetbits_le32(&ccm->analog_pll_video,
+			BM_ANADIG_PLL_VIDEO_BYPASS,
+			BM_ANADIG_PLL_VIDEO_ENABLE);
+}
+
+static void setup_display(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+	enable_videopll();
+
+	/* When a reset/reboot is performed the display power needs to be turned
+	 * off for atleast 500ms. The boot time is ~300ms, we need to wait for
+	 * an additional 200ms here. Unfortunately we use external PMIC for
+	 * doing the reset, so can not differentiate between POR vs soft reset
+	 */
+	mdelay(200);
+
+	/* CCM_CSCMR2 -> ldb_di0_ipu_div [IMX6SDLRM page 839] */
+	/* divide IPU clock by 7 */
+	setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
+
+	/* CCM_CHSCCDR -> ipu1_di0_clk_sel [IMX6SDLRM page 849] */
+	/* Set LDB_DI0 as clock source for IPU_DI0 */
+	clrsetbits_le32(&mxc_ccm->chsccdr,
+			MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK,
+			(CHSCCDR_CLK_SEL_LDB_DI0 <<
+			MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET));
+
+	/* Turn on IPU LDB DI0 clocks */
+	setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);
+
+	enable_ipu_clock();
+
+	/* IOMUXC_GPR2 [IMX6SDLRM page 2049] */
+	/* Set LDB Channel 0 in SPWG 24 Bit mode */
+	writel(IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH |
+	       IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
+	       IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
+	       IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0,
+	       &iomux->gpr[2]);
+
+	/* IOMUXC_GPR3 [IMX6SDLRM page 2051] */
+	/* LVDS0 is connected to IPU DI0 */
+	clrsetbits_le32(&iomux->gpr[3],
+			IOMUXC_GPR3_LVDS0_MUX_CTL_MASK,
+		       (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
+			IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET));
+}
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+	return 1;
+}
+
+int board_early_init_f(void)
+{
+	select_ldb_di_clock_source(MXC_PLL5_CLK);
+
+	return 0;
+}
+
+static int eeti_touch_get_model(struct udevice *dev, char *result) {
+	u8 query[68] = {0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'E', 0x00, 0x00, 0x00};
+	struct i2c_msg qmsg = {
+		.addr = 0x2a,
+		.flags = 0,
+		.len = sizeof(query),
+		.buf = query,
+	};
+	u8 reply[66] = {0};
+	struct i2c_msg rmsg = {
+		.addr = 0x2a,
+		.flags = I2C_M_RD,
+		.len = sizeof(reply),
+		.buf = reply,
+	};
+	int err;
+
+	err = dm_i2c_xfer(dev, &qmsg, 1);
+	if (err)
+		return err;
+
+	/*
+	 * device sends IRQ when its ok to read. To keep the code
+	 * simple we just wait an arbitrary, long enough time period.
+	 */
+	mdelay(10);
+
+	err = dm_i2c_xfer(dev, &rmsg, 1);
+	if (err)
+		return err;
+
+	if (reply[0] != 0x42 || reply[1] != 0x00 ||
+	    reply[2] != 0x03 || reply[4] != 'E')
+		return -EPROTO;
+
+	memcpy(result, reply+5, 10);
+	return 0;
+}
+
+static bool b1x5v2_board_is_p_model(void)
+{
+	struct udevice *bus = NULL;
+	struct udevice *dev = NULL;
+	int err;
+
+	err = uclass_get_device_by_name(UCLASS_I2C, "i2c@21a0000", &bus);
+	if (err || !bus) {
+		printf("Could not get I2C bus: %d\n", err);
+		return true;
+	}
+
+	/* The P models do not have this port expander */
+	err = dm_i2c_probe(bus, 0x21, 0, &dev);
+	if (err || !dev) {
+		return true;
+	}
+
+	return false;
+}
+
+static enum product_type b1x5v2_board_type(void)
+{
+	struct udevice *bus = NULL;
+	struct udevice *dev = NULL;
+	char model[11] = {0};
+	int err;
+	int retry;
+
+	err = uclass_get_device_by_name(UCLASS_I2C, "i2c@21a8000", &bus);
+	if (err) {
+		printf("Could not get I2C bus: %d\n", err);
+		return PRODUCT_TYPE_INVALID;
+	}
+
+	err = dm_i2c_probe(bus, 0x41, 0, &dev);
+	if (!err && dev) { /* Ilitek Touchscreen */
+		if (b1x5v2_board_is_p_model()) {
+			return PRODUCT_TYPE_B105PV2;
+		} else {
+			return PRODUCT_TYPE_B105V2;
+		}
+	}
+
+	err = dm_i2c_probe(bus, 0x2a, 0, &dev);
+	if (err || !dev) {
+		printf("Could not find touchscreen: %d\n", err);
+		return PRODUCT_TYPE_INVALID;
+	}
+
+	for (retry = 0; retry < 3; ++retry) {
+		err = eeti_touch_get_model(dev, model);
+		if (!err)
+			break;
+		printf("Retry %d read EETI touchscreen model: %d\n", retry + 1, err);
+	}
+	if (err) {
+		printf("Could not read EETI touchscreen model: %d\n", err);
+		return PRODUCT_TYPE_INVALID;
+	}
+
+	if (!strcmp(model, "Orion_1320")) { /* EETI EXC80H60 */
+		if (b1x5v2_board_is_p_model()) {
+			return PRODUCT_TYPE_B125PV2;
+		} else {
+			return PRODUCT_TYPE_B125V2;
+		}
+	} else if (!strcmp(model, "Orion_1343")) { /* EETI EXC80H84 */
+		return PRODUCT_TYPE_B155V2;
+	}
+
+	printf("Unknown EETI touchscreen model: %s\n", model);
+	return PRODUCT_TYPE_INVALID;
+}
+
+static void set_env_per_board_type(enum product_type type)
+{
+	switch (type) {
+	case PRODUCT_TYPE_B105V2:
+		env_set("resolution", "1280x800");
+		env_set("devicetype", "B105v2");
+		env_set("fdtfile", "imx6dl-b105v2.dtb");
+		break;
+	case PRODUCT_TYPE_B105PV2:
+		env_set("resolution", "1280x800");
+		env_set("devicetype", "B105Pv2");
+		env_set("fdtfile", "imx6dl-b105pv2.dtb");
+		break;
+	case PRODUCT_TYPE_B125V2:
+		env_set("resolution", "1280x800");
+		env_set("devicetype", "B125v2");
+		env_set("fdtfile", "imx6dl-b125v2.dtb");
+		break;
+	case PRODUCT_TYPE_B125PV2:
+		env_set("resolution", "1280x800");
+		env_set("devicetype", "B125Pv2");
+		env_set("fdtfile", "imx6dl-b125pv2.dtb");
+		break;
+	case PRODUCT_TYPE_B155V2:
+		env_set("resolution", "1366x768");
+		env_set("devicetype", "B155v2");
+		env_set("fdtfile", "imx6dl-b155v2.dtb");
+		break;
+	default:
+		break;
+	}
+}
+
+static int b1x5v2_board_type_autodetect(void)
+{
+	enum product_type product = b1x5v2_board_type();
+	if (product != PRODUCT_TYPE_INVALID) {
+		set_env_per_board_type(product);
+		return 0;
+	}
+	return -1;
+}
+
+/*
+ * Extracts MAC and product information from the VPD.
+ */
+static int vpd_callback(struct vpd_cache *vpd, u8 id, u8 version, u8 type,
+			size_t size, u8 const *data)
+{
+	if (type == VPD_TYPE_INVALID)
+		return 0;
+
+	if (id == VPD_BLOCK_HWID && version == 1 && size >= 1) {
+		vpd->product_id = data[0];
+	} else if (id == VPD_BLOCK_NETWORK && version == 1) {
+		if (size >= VPD_MAC_ADDRESS_LENGTH) {
+			memcpy(vpd->mac, data, VPD_MAC_ADDRESS_LENGTH);
+			vpd->flags |= VPD_FLAG_VALID_MAC;
+		}
+	}
+
+	return 0;
+}
+
+static int read_spi_vpd(struct vpd_cache *cache,
+		 int (*process_block)(struct vpd_cache *, u8 id, u8 version,
+				      u8 type, size_t size, u8 const *data))
+{
+	static const int size = B1X5V2_GE_VPD_SIZE;
+	struct udevice *dev;
+	int ret;
+	u8 *data;
+
+	ret = uclass_get_device_by_name(UCLASS_SPI_FLASH, "m25p80@0", &dev);
+	if (ret)
+		return ret;
+
+	data = malloc(size);
+	if (!data)
+		return -ENOMEM;
+
+	ret = spi_flash_read_dm(dev, B1X5V2_GE_VPD_OFFSET, size, data);
+	if (ret) {
+		free(data);
+		return ret;
+	}
+
+	ret = vpd_reader(size, data, cache, process_block);
+
+	free(data);
+
+	return ret;
+}
+
+int board_init(void)
+{
+	if (!read_spi_vpd(&vpd, vpd_callback)) {
+		vpd.is_read = true;
+	}
+
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+	setup_display();
+
+	return 0;
+}
+
+static void init_bootcause(void)
+{
+	const char *cause;
+
+	/* We care about WDOG only, treating everything else as
+	 * a power-on-reset.
+	 */
+	if (get_imx_reset_cause() & 0x0010)
+		cause = "WDOG";
+	else
+		cause = "POR";
+
+	env_set("bootcause", cause);
+}
+
+int misc_init_r(void)
+{
+	init_bootcause();
+
+	return 0;
+}
+
+#define M41T62_REG_FLAGS	0xf
+#define M41T62_FLAGS_OF		(1 << 2)
+static void check_time(void)
+{
+	struct udevice *rtc = NULL;
+	struct rtc_time tm;
+	u8 val;
+	int ret;
+
+	ret = uclass_get_device_by_name(UCLASS_RTC, "m41t62@68", &rtc);
+	if (ret) {
+		printf("Could not get RTC: %d\n", ret);
+		env_set("rtc_status", "FAIL");
+		return;
+	}
+
+	ret = dm_i2c_read(rtc, M41T62_REG_FLAGS, &val, sizeof(val));
+	if (ret) {
+		printf("Could not read RTC register: %d\n", ret);
+		env_set("rtc_status", "FAIL");
+		return;
+	}
+
+	ret = dm_rtc_reset(rtc);
+	if (ret) {
+		printf("Could not reset RTC: %d\n", ret);
+		env_set("rtc_status", "FAIL");
+		return;
+	}
+
+	if (val & M41T62_FLAGS_OF) {
+		env_set("rtc_status", "STOP");
+		return;
+	}
+
+	ret = dm_rtc_get(rtc, &tm);
+	if (ret) {
+		printf("Could not read RTC: %d\n", ret);
+		env_set("rtc_status", "FAIL");
+		return;
+	}
+
+	if (tm.tm_year > 2037) {
+		tm.tm_sec  = 0;
+		tm.tm_min  = 0;
+		tm.tm_hour = 0;
+		tm.tm_mday = 1;
+		tm.tm_wday = 2;
+		tm.tm_mon  = 1;
+		tm.tm_year = 2036;
+
+		ret = dm_rtc_set(rtc, &tm);
+		if (ret) {
+			printf("Could not update RTC: %d\n", ret);
+			env_set("rtc_status", "FAIL");
+			return;
+		}
+
+		printf("RTC behind 2037, capped to 2036 for userspace handling\n");
+		env_set("rtc_status", "2038");
+		return;
+	}
+
+	env_set("rtc_status", "OK");
+}
+
+static void process_vpd(struct vpd_cache *vpd)
+{
+	if (!vpd->is_read) {
+		printf("VPD wasn't read\n");
+		return;
+	}
+
+	if (vpd->flags & VPD_FLAG_VALID_MAC) {
+		eth_env_set_enetaddr_by_index("eth", 0, vpd->mac);
+		env_set("ethact", "eth0");
+	}
+}
+
+int board_late_init(void)
+{
+	process_vpd(&vpd);
+
+	if (vpd.product_id >= PRODUCT_TYPE_B105V2 &&
+	    vpd.product_id <= PRODUCT_TYPE_B155V2) {
+		set_env_per_board_type((enum product_type)vpd.product_id);
+	} else {
+		b1x5v2_board_type_autodetect();
+	}
+
+	printf("Board: GE %s\n", env_get("devicetype"));
+
+	check_time();
+
+	return 0;
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+	char *rtc_status = env_get("rtc_status");
+
+	fdt_setprop(blob, 0, "ge,boot-ver", version_string,
+	                                    strlen(version_string) + 1);
+	fdt_setprop(blob, 0, "ge,rtc-status", rtc_status,
+	                                    strlen(rtc_status) + 1);
+
+	return 0;
+}
+#endif
+
+static int do_b1x5v2_autodetect(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[])
+{
+	int err;
+
+	err = b1x5v2_board_type_autodetect();
+	if (!err)
+		printf("Identified %s\n", env_get("devicetype"));
+
+	return 0;
+}
+
+U_BOOT_CMD(
+       autodetect_devtype, 1,      1,      do_b1x5v2_autodetect,
+       "autodetect b1x5v2 device type",
+       ""
+);
+
+#endif // CONFIG_SPL_BUILD
diff --git a/board/ge/b1x5v2/spl.c b/board/ge/b1x5v2/spl.c
new file mode 100644
index 0000000..2e6f905
--- /dev/null
+++ b/board/ge/b1x5v2/spl.c
@@ -0,0 +1,587 @@
+/*
+ * GE b1x5v2 - QMX6 SPL
+ *
+ * Copyright 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Copyright 2018-2020 GE Inc.
+ * Copyright 2018-2020 Collabora Ltd.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <init.h>
+#include <spi.h>
+#include <spi_flash.h>
+#include <spl.h>
+
+#if defined(CONFIG_SPL_BUILD)
+
+#include <asm/arch/mx6-ddr.h>
+
+#define IMX6DQ_DRIVE_STRENGTH_40_OHM		0x30
+#define IMX6DQ_DRIVE_STRENGTH_48_OHM		0x28
+#define IMX6DQ_DRIVE_STRENGTH			IMX6DQ_DRIVE_STRENGTH_40_OHM
+
+#define QMX6_DDR_PKE_DISABLED			0x00000000
+#define QMX6_DDR_ODT_60_OHM			(2 << 16)
+#define QMX6_DDR_TYPE_DDR3			0x000c0000
+
+#define QMX6_DRAM_SDCKE_PULLUP_100K		0x00003000
+#define QMX6_DRAM_SDBA2_PULLUP_NONE		0x00000000
+
+#define SPI_PAD_CTRL (PAD_CTL_HYS |				\
+	PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+#define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
+	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |			\
+	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define SPI1_CS0 IMX_GPIO_NR(3, 19)
+#define POWEROFF IMX_GPIO_NR(4, 25)
+
+static iomux_v3_cfg_t const poweroff_pads[] = {
+	IOMUX_PADS(PAD_DISP0_DAT4__GPIO4_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
+static iomux_v3_cfg_t const uart2_pads[] = {
+	IOMUX_PADS(PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
+static iomux_v3_cfg_t const uart3_pads[] = {
+	IOMUX_PADS(PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
+static iomux_v3_cfg_t const ecspi1_pads[] = {
+	IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
+static struct mx6dq_iomux_ddr_regs mx6q_ddr_ioregs = {
+	.dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_cas = IMX6DQ_DRIVE_STRENGTH,
+	.dram_ras = IMX6DQ_DRIVE_STRENGTH,
+	.dram_reset = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdcke0 = QMX6_DRAM_SDCKE_PULLUP_100K,
+	.dram_sdcke1 = QMX6_DRAM_SDCKE_PULLUP_100K,
+	.dram_sdba2 = QMX6_DRAM_SDBA2_PULLUP_NONE,
+	.dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm0 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm1 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm2 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm3 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm4 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm5 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm6 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm7 = IMX6DQ_DRIVE_STRENGTH,
+};
+
+static const struct mx6sdl_iomux_ddr_regs mx6dl_ddr_ioregs = {
+	.dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_cas = IMX6DQ_DRIVE_STRENGTH,
+	.dram_ras = IMX6DQ_DRIVE_STRENGTH,
+	.dram_reset = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdcke0 = QMX6_DRAM_SDCKE_PULLUP_100K,
+	.dram_sdcke1 = QMX6_DRAM_SDCKE_PULLUP_100K,
+	.dram_sdba2 = QMX6_DRAM_SDBA2_PULLUP_NONE,
+	.dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm0 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm1 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm2 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm3 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm4 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm5 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm6 = IMX6DQ_DRIVE_STRENGTH,
+	.dram_dqm7 = IMX6DQ_DRIVE_STRENGTH,
+};
+
+static struct mx6dq_iomux_grp_regs mx6q_grp_ioregs = {
+	.grp_ddr_type = QMX6_DDR_TYPE_DDR3,
+	.grp_ddrmode_ctl = QMX6_DDR_ODT_60_OHM,
+	.grp_ddrpke = QMX6_DDR_PKE_DISABLED,
+	.grp_addds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_ctlds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_ddrmode = QMX6_DDR_ODT_60_OHM,
+	.grp_b0ds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_b1ds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_b2ds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_b3ds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_b4ds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_b5ds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_b6ds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_b7ds = IMX6DQ_DRIVE_STRENGTH,
+};
+
+static const struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
+	.grp_ddr_type = QMX6_DDR_TYPE_DDR3,
+	.grp_ddrmode_ctl = QMX6_DDR_ODT_60_OHM,
+	.grp_ddrpke = QMX6_DDR_PKE_DISABLED,
+	.grp_addds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_ctlds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_ddrmode = QMX6_DDR_ODT_60_OHM,
+	.grp_b0ds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_b1ds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_b2ds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_b3ds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_b4ds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_b5ds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_b6ds = IMX6DQ_DRIVE_STRENGTH,
+	.grp_b7ds = IMX6DQ_DRIVE_STRENGTH,
+};
+
+const struct mx6_mmdc_calibration mx6q_mmcd_calib = {
+	.p0_mpwldectrl0 =  0x0016001A,
+	.p0_mpwldectrl1 =  0x0023001C,
+	.p1_mpwldectrl0 =  0x0028003A,
+	.p1_mpwldectrl1 =  0x001F002C,
+	.p0_mpdgctrl0 =  0x43440354,
+	.p0_mpdgctrl1 =  0x033C033C,
+	.p1_mpdgctrl0 =  0x43300368,
+	.p1_mpdgctrl1 =  0x03500330,
+	.p0_mprddlctl =  0x3228242E,
+	.p1_mprddlctl =  0x2C2C2636,
+	.p0_mpwrdlctl =  0x36323A38,
+	.p1_mpwrdlctl =  0x42324440,
+};
+
+const struct mx6_mmdc_calibration mx6q_2g_mmcd_calib = {
+	.p0_mpwldectrl0 =  0x00080016,
+	.p0_mpwldectrl1 =  0x001D0016,
+	.p1_mpwldectrl0 =  0x0018002C,
+	.p1_mpwldectrl1 =  0x000D001D,
+	.p0_mpdgctrl0 =    0x43200334,
+	.p0_mpdgctrl1 =    0x0320031C,
+	.p1_mpdgctrl0 =    0x0344034C,
+	.p1_mpdgctrl1 =    0x03380314,
+	.p0_mprddlctl =    0x3E36383A,
+	.p1_mprddlctl =    0x38363240,
+	.p0_mpwrdlctl =	   0x36364238,
+	.p1_mpwrdlctl =    0x4230423E,
+};
+
+const struct mx6_mmdc_calibration mx6q_4g_mmcd_calib = {
+	.p0_mpwldectrl0 =  0x00180018,
+	.p0_mpwldectrl1 =  0x00220018,
+	.p1_mpwldectrl0 =  0x00330046,
+	.p1_mpwldectrl1 =  0x002B003D,
+	.p0_mpdgctrl0 =    0x4344034C,
+	.p0_mpdgctrl1 =    0x033C033C,
+	.p1_mpdgctrl0 =    0x03700374,
+	.p1_mpdgctrl1 =    0x03600338,
+	.p0_mprddlctl =    0x443E3E40,
+	.p1_mprddlctl =    0x423E3E48,
+	.p0_mpwrdlctl =	   0x3C3C4442,
+	.p1_mpwrdlctl =    0x46384C46,
+};
+
+static const struct mx6_mmdc_calibration mx6s_mmcd_calib = {
+	.p0_mpwldectrl0 =  0x00480049,
+	.p0_mpwldectrl1 =  0x00410044,
+	.p0_mpdgctrl0 =    0x42480248,
+	.p0_mpdgctrl1 =    0x023C023C,
+	.p0_mprddlctl =    0x40424644,
+	.p0_mpwrdlctl =    0x34323034,
+};
+
+static const struct mx6_mmdc_calibration mx6s_2g_mmcd_calib = {
+	.p0_mpwldectrl0 =  0x00450048,
+	.p0_mpwldectrl1 =  0x003B003F,
+	.p0_mpdgctrl0 =    0x424C0248,
+	.p0_mpdgctrl1 =    0x0234023C,
+	.p0_mprddlctl =    0x40444848,
+	.p0_mpwrdlctl =    0x38363232,
+};
+
+static const struct mx6_mmdc_calibration mx6dl_mmcd_calib = {
+	.p0_mpwldectrl0 =  0x0043004B,
+	.p0_mpwldectrl1 =  0x003A003E,
+	.p1_mpwldectrl0 =  0x0047004F,
+	.p1_mpwldectrl1 =  0x004E0061,
+	.p0_mpdgctrl0 =    0x42500250,
+	.p0_mpdgctrl1 =	   0x0238023C,
+	.p1_mpdgctrl0 =    0x42640264,
+	.p1_mpdgctrl1 =    0x02500258,
+	.p0_mprddlctl =    0x40424846,
+	.p1_mprddlctl =    0x46484842,
+	.p0_mpwrdlctl =    0x38382C30,
+	.p1_mpwrdlctl =    0x34343430,
+};
+
+static const struct mx6_mmdc_calibration mx6dl_2g_mmcd_calib = {
+	.p0_mpwldectrl0 =  0x00450045,
+	.p0_mpwldectrl1 =  0x00390043,
+	.p1_mpwldectrl0 =  0x0049004D,
+	.p1_mpwldectrl1 =  0x004E0061,
+	.p0_mpdgctrl0 =    0x4240023C,
+	.p0_mpdgctrl1 =	   0x0228022C,
+	.p1_mpdgctrl0 =    0x02400244,
+	.p1_mpdgctrl1 =    0x02340238,
+	.p0_mprddlctl =    0x42464648,
+	.p1_mprddlctl =    0x4446463C,
+	.p0_mpwrdlctl =    0x3C38323A,
+	.p1_mpwrdlctl =    0x34323430,
+};
+
+static struct mx6_ddr3_cfg mem_ddr_2g = {
+	.mem_speed = 1600,
+	.density = 2,
+	.width = 16,
+	.banks = 8,
+	.rowaddr = 14,
+	.coladdr = 10,
+	.pagesz = 2,
+	.trcd = 1310,
+	.trcmin = 4875,
+	.trasmin = 3500,
+};
+
+static struct mx6_ddr3_cfg mem_ddr_4g = {
+	.mem_speed = 1600,
+	.density = 4,
+	.width = 16,
+	.banks = 8,
+	.rowaddr = 15,
+	.coladdr = 10,
+	.pagesz = 2,
+	.trcd = 1310,
+	.trcmin = 4875,
+	.trasmin = 3500,
+};
+
+static struct mx6_ddr3_cfg mem_ddr_8g = {
+	.mem_speed = 1600,
+	.density = 8,
+	.width = 16,
+	.banks = 8,
+	.rowaddr = 16,
+	.coladdr = 10,
+	.pagesz = 2,
+	.trcd = 1310,
+	.trcmin = 4875,
+	.trasmin = 3500,
+};
+
+static void spl_dram_init(u8 width, u32 memsize) {
+	struct mx6_ddr_sysinfo sysinfo = {
+		 /* width of data bus: 0=16, 1=32, 2=64 */
+		.dsize		= width / 32,
+		/* config for full 4GB range so that get_mem_size() works */
+		.cs_density	= 32,	/* 32Gb per CS */
+
+		.ncs = 1,
+		.cs1_mirror = 0,
+		.rtt_wr = 2,
+		.rtt_nom = 2,
+		.walat = 0,
+		.ralat = 5,
+		.mif3_mode = 3,
+		.bi_on = 1,
+		.sde_to_rst = 0x0d,
+		.rst_to_cke = 0x20,
+	};
+
+	if (is_cpu_type(MXC_CPU_MX6SOLO)) {
+		sysinfo.walat = 1;
+		mx6sdl_dram_iocfg(width, &mx6dl_ddr_ioregs, &mx6sdl_grp_ioregs);
+
+		switch(memsize) {
+		case 512:
+			mx6_dram_cfg(&sysinfo, &mx6s_2g_mmcd_calib, &mem_ddr_2g);
+			break;
+		default:
+			mx6_dram_cfg(&sysinfo, &mx6s_mmcd_calib, &mem_ddr_4g);
+			break;
+		}
+	} else if (is_cpu_type(MXC_CPU_MX6DL)) {
+		sysinfo.walat = 1;
+		mx6sdl_dram_iocfg(width, &mx6dl_ddr_ioregs, &mx6sdl_grp_ioregs);
+
+		switch(memsize) {
+		case 2048:
+			mx6_dram_cfg(&sysinfo, &mx6dl_2g_mmcd_calib, &mem_ddr_4g);
+			break;
+		default:
+			mx6_dram_cfg(&sysinfo, &mx6dl_mmcd_calib, &mem_ddr_2g);
+			break;
+		}
+	} else if (is_cpu_type(MXC_CPU_MX6Q)) {
+		mx6dq_dram_iocfg(width, &mx6q_ddr_ioregs, &mx6q_grp_ioregs);
+
+		switch(memsize) {
+		case 4096:
+			sysinfo.cs_density = 16;
+			sysinfo.ncs = 2;
+			mx6_dram_cfg(&sysinfo, &mx6q_4g_mmcd_calib, &mem_ddr_8g);
+			break;
+		case 2048:
+			mx6_dram_cfg(&sysinfo, &mx6q_2g_mmcd_calib, &mem_ddr_4g);
+			break;
+		default:
+			mx6_dram_cfg(&sysinfo, &mx6q_mmcd_calib, &mem_ddr_2g);
+			break;
+		}
+	}
+}
+
+/* Define a minimal structure so that the part number can be read via SPL */
+#define CFG_MFG_ADDR_OFFSET	(spi->size - SZ_16K)
+struct mfgdata {
+	unsigned char tsize;
+	/* size of checksummed part in bytes */
+	unsigned char ckcnt;
+	/* checksum corrected byte */
+	unsigned char cksum;
+	/* decimal serial number, packed BCD */
+	unsigned char serial[6];
+	 /* part number, right justified, ASCII */
+	unsigned char pn[16];
+};
+
+static void conv_ascii(unsigned char *dst, unsigned char *src, int len)
+{
+	int remain = len;
+	unsigned char *sptr = src;
+	unsigned char *dptr = dst;
+
+	while (remain) {
+		if (*sptr) {
+			*dptr = *sptr;
+			dptr++;
+		}
+		sptr++;
+		remain--;
+	}
+	*dptr = 0x0;
+}
+
+/*
+ * Returns the total size of the memory [in MB] the board is equipped with
+ *
+ * This is determined via the partnumber which is stored in the
+ * congatec manufacturing area
+ */
+static int get_boardmem_size(struct spi_flash *spi)
+{
+	int ret;
+	int i;
+	int arraysize;
+	char buf[sizeof(struct mfgdata)];
+	struct mfgdata *data = (struct mfgdata *)buf;
+	unsigned char outbuf[32];
+	char partnumbers_2g[4][7] = { "016104", "016105", "016304", "016305" };
+	char partnumbers_4g[2][7] = { "016308", "016318" };
+	char partnumbers_512m[2][7] = { "016203", "616300" };
+
+	ret = spi_flash_read(spi, CFG_MFG_ADDR_OFFSET, sizeof(struct mfgdata),
+			     buf);
+	if (ret)
+		return 1024; /* default to 1GByte in case of error */
+
+	conv_ascii(outbuf, data->pn, sizeof(data->pn));
+
+	printf("Detected Congatec QMX6 SOM: %s\n", outbuf);
+
+	/* congatec PN 016104, 016105, 016304, 016305 have 2GiB of RAM */
+	arraysize = sizeof(partnumbers_2g) / sizeof(partnumbers_2g[0]);
+	for (i=0; i < arraysize; i++) {
+		if (!memcmp(outbuf,partnumbers_2g[i],6))
+			return 2048;
+	}
+
+	/* congatec PN 016308, 016318 have 4GiB of RAM */
+	arraysize = sizeof(partnumbers_4g) / sizeof(partnumbers_4g[0]);
+	for (i=0; i < arraysize; i++) {
+		if (!memcmp(outbuf,partnumbers_4g[i],6))
+			return 4096;
+	}
+
+	/* congatec PN 016203, 616300 has 512MiB of RAM */
+	arraysize = sizeof(partnumbers_512m) / sizeof(partnumbers_512m[0]);
+	for (i=0; i < arraysize; i++) {
+		if (!memcmp(outbuf,partnumbers_512m[i],6))
+			return 512;
+	}
+
+	/* default to 1GByte */
+	return 1024;
+}
+
+void reset_cpu(ulong addr)
+{
+}
+
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+	if (bus == 0 && cs == 0)
+		return (SPI1_CS0);
+	else
+		return -1;
+}
+
+static void memory_init(void) {
+	struct spi_flash *spi;
+	u8 width;
+	u32 size;
+
+	SETUP_IOMUX_PADS(ecspi1_pads);
+	gpio_direction_output(SPI1_CS0, 0);
+
+	spi = spi_flash_probe(CONFIG_ENV_SPI_BUS,
+			      CONFIG_ENV_SPI_CS,
+			      CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+	if (!spi)
+		panic("Cannot identify board type: SPI-NOR flash module not detected\n");
+
+	/* lock manufacturer area */
+	spi_flash_protect(spi, CFG_MFG_ADDR_OFFSET, SZ_16K, true);
+
+	width = is_cpu_type(MXC_CPU_MX6SOLO) ? 32 : 64;
+	size = get_boardmem_size(spi);
+	printf("Detected Memory Size: %u\n", size);
+
+	spl_dram_init(width, size);
+}
+
+static void ccgr_init(void)
+{
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	static const uint32_t ccgr0 =
+		MXC_CCM_CCGR0_AIPS_TZ1_MASK |
+		MXC_CCM_CCGR0_AIPS_TZ2_MASK |
+		MXC_CCM_CCGR0_APBHDMA_MASK |
+		MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK |
+		MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK |
+		MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK |
+		MXC_CCM_CCGR0_CHEETAH_DBG_CLK_MASK;
+
+	static const uint32_t ccgr1 =
+		MXC_CCM_CCGR1_ECSPI1S_MASK |
+		MXC_CCM_CCGR1_ENET_MASK |
+		MXC_CCM_CCGR1_EPIT1S_MASK |
+		MXC_CCM_CCGR1_EPIT2S_MASK |
+		MXC_CCM_CCGR1_GPT_BUS_MASK;
+
+	static const uint32_t ccgr2 =
+		MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK |
+		MXC_CCM_CCGR2_IPMUX1_MASK |
+		MXC_CCM_CCGR2_IPMUX2_MASK |
+		MXC_CCM_CCGR2_IPMUX3_MASK |
+		MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_MASK |
+		MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_MASK |
+		MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_MASK;
+
+	static const uint32_t ccgr3 =
+		MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_MASK |
+		MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_MASK |
+		MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_MASK |
+		MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_MASK |
+		MXC_CCM_CCGR3_OCRAM_MASK;
+
+	static const uint32_t ccgr4 =
+		MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_MASK |
+		MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK |
+		MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_MASK |
+		MXC_CCM_CCGR4_PWM1_MASK |
+		MXC_CCM_CCGR4_PWM2_MASK |
+		MXC_CCM_CCGR4_PWM3_MASK |
+		MXC_CCM_CCGR4_PWM4_MASK;
+
+	static const uint32_t ccgr5 =
+		MXC_CCM_CCGR5_ROM_MASK |
+		MXC_CCM_CCGR5_SDMA_MASK |
+		MXC_CCM_CCGR5_UART_MASK |
+		MXC_CCM_CCGR5_UART_SERIAL_MASK;
+
+	static const uint32_t ccgr6 =
+		MXC_CCM_CCGR6_USBOH3_MASK |
+		MXC_CCM_CCGR6_USDHC1_MASK |
+		MXC_CCM_CCGR6_USDHC2_MASK |
+		MXC_CCM_CCGR6_SIM1_CLK_MASK |
+		MXC_CCM_CCGR6_SIM2_CLK_MASK;
+
+	writel(ccgr0, &ccm->CCGR0);
+	writel(ccgr1, &ccm->CCGR1);
+	writel(ccgr2, &ccm->CCGR2);
+	writel(ccgr3, &ccm->CCGR3);
+	writel(ccgr4, &ccm->CCGR4);
+	writel(ccgr5, &ccm->CCGR5);
+	writel(ccgr6, &ccm->CCGR6);
+}
+
+void board_init_f(ulong dummy)
+{
+	/* setup clock gating */
+	ccgr_init();
+
+	/* setup AIPS and disable watchdog */
+	arch_cpu_init();
+
+	/* setup AXI */
+	gpr_init();
+
+	/*
+	 * setup poweroff GPIO. This controls system power regulator. Once
+	 * the power button is released this must be enabled to keep system
+	 * running. Not enabling it (or disabling it later) will turn off
+	 * the main system regulator and instantly poweroff the system. We
+	 * do this very early, to reduce the time users have to press the
+	 * power button.
+	 */
+	SETUP_IOMUX_PADS(poweroff_pads);
+	gpio_direction_output(POWEROFF, 1);
+
+	/* setup GP timer */
+	timer_init();
+
+	/* iomux */
+	if (CONFIG_MXC_UART_BASE == UART2_BASE)
+		SETUP_IOMUX_PADS(uart2_pads);
+	else if (CONFIG_MXC_UART_BASE == UART3_BASE)
+		SETUP_IOMUX_PADS(uart3_pads);
+
+	/* UART clocks enabled and gd valid - init serial console */
+	preloader_console_init();
+
+	/* Needed for malloc() [used by SPI] to work in SPL prior to board_init_r() */
+	spl_init();
+
+	/* DDR initialization */
+	memory_init();
+}
+
+void spl_board_prepare_for_boot(void)
+{
+	printf("Load normal U-Boot...\n");
+}
+#endif
diff --git a/board/ge/bx50v3/Kconfig b/board/ge/bx50v3/Kconfig
index 993b055..0593856 100644
--- a/board/ge/bx50v3/Kconfig
+++ b/board/ge/bx50v3/Kconfig
@@ -15,4 +15,6 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ge_bx50v3"
 
+source "board/ge/common/Kconfig"
+
 endif
diff --git a/board/ge/bx50v3/MAINTAINERS b/board/ge/bx50v3/MAINTAINERS
index 91d5c86..fafbd78 100644
--- a/board/ge/bx50v3/MAINTAINERS
+++ b/board/ge/bx50v3/MAINTAINERS
@@ -1,9 +1,14 @@
-GE_BX50V3 BOARD
+GE BX50V3 BOARD
 M:	Ian Ray <ian.ray@ge.com>
+M:	Sebastian Reichel <sebastian.reichel@collabora.com>
 S:	Maintained
+F:	arch/arm/dts/imx6q-b450v3.dts
+F:	arch/arm/dts/imx6q-b650v3.dts
+F:	arch/arm/dts/imx6q-b850v3.dts
+F:	arch/arm/dts/imx6q-bx50v3*
 F:	board/ge/bx50v3/
-F:	include/configs/ge_bx50v3.h
-F:	configs/ge_bx50v3_defconfig
 F:	configs/ge_b450v3_defconfig
 F:	configs/ge_b650v3_defconfig
 F:	configs/ge_b850v3_defconfig
+F:	configs/ge_bx50v3_defconfig
+F:	include/configs/ge_bx50v3.h
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index cf76cf7..8a38ac5 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -35,7 +35,7 @@
 #include <version.h>
 #include <stdlib.h>
 #include <dm/root.h>
-#include "../common/ge_common.h"
+#include "../common/ge_rtc.h"
 #include "../common/vpd_reader.h"
 #include "../../../drivers/net/e1000.h"
 #include <pci.h>
@@ -429,7 +429,7 @@ static void set_confidx(const struct vpd_cache* vpd)
 
 int board_init(void)
 {
-	if (!read_vpd(&vpd, vpd_callback)) {
+	if (!read_i2c_vpd(&vpd, vpd_callback)) {
 		int ret, rescan;
 
 		vpd.is_read = true;
diff --git a/board/ge/common/Kconfig b/board/ge/common/Kconfig
new file mode 100644
index 0000000..323ed1f
--- /dev/null
+++ b/board/ge/common/Kconfig
@@ -0,0 +1,7 @@
+config GE_VPD
+	bool "Enable GE VPD Support"
+	default y
+
+config GE_RTC
+	bool "Enable GE RTC Support"
+	default y
diff --git a/board/ge/common/Makefile b/board/ge/common/Makefile
index 8a21dcb..8bd44e3 100644
--- a/board/ge/common/Makefile
+++ b/board/ge/common/Makefile
@@ -2,4 +2,5 @@
 #
 # Copyright 2017 General Electric Company
 
-obj-y  := vpd_reader.o ge_common.o
+obj-$(CONFIG_GE_VPD)  += vpd_reader.o
+obj-$(CONFIG_GE_RTC)  += ge_rtc.o
diff --git a/board/ge/common/ge_common.c b/board/ge/common/ge_rtc.c
index 48c3778..48c3778 100644
--- a/board/ge/common/ge_common.c
+++ b/board/ge/common/ge_rtc.c
diff --git a/board/ge/common/ge_common.h b/board/ge/common/ge_rtc.h
index d33486d..d33486d 100644
--- a/board/ge/common/ge_common.h
+++ b/board/ge/common/ge_rtc.h
diff --git a/board/ge/common/vpd_reader.c b/board/ge/common/vpd_reader.c
index d42b00d..421fee5 100644
--- a/board/ge/common/vpd_reader.c
+++ b/board/ge/common/vpd_reader.c
@@ -110,9 +110,9 @@ static const size_t HEADER_BLOCK_ECC_LEN = 4;
 
 static const u8 ECC_BLOCK_ID = 0xFF;
 
-static int vpd_reader(size_t size, u8 *data, struct vpd_cache *userdata,
-		      int (*fn)(struct vpd_cache *, u8 id, u8 version, u8 type,
-				size_t size, u8 const *data))
+int vpd_reader(size_t size, u8 *data, struct vpd_cache *userdata,
+	       int (*fn)(struct vpd_cache *, u8 id, u8 version, u8 type,
+			 size_t size, u8 const *data))
 {
 	if (size < HEADER_BLOCK_LEN || !data || !fn)
 		return -EINVAL;
@@ -200,9 +200,9 @@ static int vpd_reader(size_t size, u8 *data, struct vpd_cache *userdata,
 	}
 }
 
-int read_vpd(struct vpd_cache *cache,
-	     int (*process_block)(struct vpd_cache *, u8 id, u8 version,
-				  u8 type, size_t size, u8 const *data))
+int read_i2c_vpd(struct vpd_cache *cache,
+		 int (*process_block)(struct vpd_cache *, u8 id, u8 version,
+				      u8 type, size_t size, u8 const *data))
 {
 	struct udevice *dev;
 	int ret;
diff --git a/board/ge/common/vpd_reader.h b/board/ge/common/vpd_reader.h
index 3045b7e..0c51dc5 100644
--- a/board/ge/common/vpd_reader.h
+++ b/board/ge/common/vpd_reader.h
@@ -16,7 +16,22 @@ struct vpd_cache;
  *
  * Returns Non-zero on error.  Negative numbers encode errno.
  */
-int read_vpd(struct vpd_cache *cache,
-	     int (*process_block)(struct vpd_cache *,
-				  u8 id, u8 version, u8 type,
-				  size_t size, u8 const *data));
+int read_i2c_vpd(struct vpd_cache *cache,
+		 int (*process_block)(struct vpd_cache *, u8 id, u8 version,
+				      u8 type, size_t size, u8 const *data));
+
+/*
+ * Read VPD from given data, verify content, call callback for each vital
+ * product data block.
+ *
+ * size: size of the raw VPD data in bytes
+ * data: raw VPD data read from device
+ * cache: structure used by process block to store VPD information
+ * process_block: callback called for each VPD data block
+ *
+ * Returns Non-zero on error.  Negative numbers encode errno.
+ */
+
+int vpd_reader(size_t size, u8 *data, struct vpd_cache *cache,
+	       int (*process_block)(struct vpd_cache *, u8 id, u8 version, u8 type,
+				    size_t size, u8 const *data));
diff --git a/board/ge/mx53ppd/Kconfig b/board/ge/mx53ppd/Kconfig
index 6dc3818..bebb2fa 100644
--- a/board/ge/mx53ppd/Kconfig
+++ b/board/ge/mx53ppd/Kconfig
@@ -13,4 +13,6 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "mx53ppd"
 
+source "board/ge/common/Kconfig"
+
 endif
diff --git a/board/ge/mx53ppd/MAINTAINERS b/board/ge/mx53ppd/MAINTAINERS
index 9b64b5d..2c06c8e 100644
--- a/board/ge/mx53ppd/MAINTAINERS
+++ b/board/ge/mx53ppd/MAINTAINERS
@@ -1,7 +1,9 @@
-MX53PPD BOARD
+GE PPD BOARD
 M:	Antti Mäentausta <antti.maentausta@ge.com>
-M:	Martyn Welch <martyn.welch@collabora.co.uk>
+M:	Ian Ray <ian.ray@ge.com>
+M:	Sebastian Reichel <sebastian.reichel@collabora.com>
 S:	Maintained
-F:	board/freescale/mx53ppd/
-F:	include/configs/mx53ppd.h
+F:	arch/arm/dts/imx53-ppd*
+F:	board/ge/mx53ppd/
 F:	configs/mx53ppd_defconfig
+F:	include/configs/mx53ppd.h
diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c
index 7627e9c..ef68973 100644
--- a/board/ge/mx53ppd/mx53ppd.c
+++ b/board/ge/mx53ppd/mx53ppd.c
@@ -36,7 +36,7 @@
 #include <watchdog.h>
 #include "ppd_gpio.h"
 #include <stdlib.h>
-#include "../../ge/common/ge_common.h"
+#include "../../ge/common/ge_rtc.h"
 #include "../../ge/common/vpd_reader.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -225,7 +225,7 @@ int board_late_init(void)
 	struct vpd_cache vpd;
 
 	memset(&vpd, 0, sizeof(vpd));
-	res = read_vpd(&vpd, vpd_callback);
+	res = read_i2c_vpd(&vpd, vpd_callback);
 	if (!res)
 		process_vpd(&vpd);
 	else
diff --git a/board/k+p/kp_imx53/kp_imx53.c b/board/k+p/kp_imx53/kp_imx53.c
index eb5b67d..efca3e0 100644
--- a/board/k+p/kp_imx53/kp_imx53.c
+++ b/board/k+p/kp_imx53/kp_imx53.c
@@ -17,11 +17,13 @@
 #include <env.h>
 #include <power/pmic.h>
 #include <fsl_pmic.h>
+#include <bootstage.h>
 #include "kp_id_rev.h"
 
 #define BOOSTER_OFF IMX_GPIO_NR(2, 23)
 #define LCD_BACKLIGHT IMX_GPIO_NR(1, 1)
 #define KEY1 IMX_GPIO_NR(2, 26)
+#define LED_RED IMX_GPIO_NR(3, 28)
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -151,3 +153,52 @@ int board_late_init(void)
 
 	return ret;
 }
+
+#define GPIO_DR 0x0
+#define GPIO_GDIR 0x4
+#define GPIO_ALT1 0x1
+#define GPIO5_BASE 0x53FDC000
+#define IOMUXC_EIM_WAIT 0x53FA81E4
+/* Green LED: GPIO5_0 */
+#define GPIO_GREEN BIT(0)
+
+void show_boot_progress(int status)
+{
+	/*
+	 * This BOOTSTAGE_ID is called at very early stage of execution. DM gpio
+	 * is not yet initialized.
+	 */
+	if (status == BOOTSTAGE_ID_START_UBOOT_F) {
+		/*
+		 * After ROM execution the EIM_WAIT PAD is set as ALT0
+		 * (according to RM it shall be ALT1 after reset). To use it as
+		 * GPIO we need to set it to ALT1.
+		 */
+		setbits_le32(((uint32_t *)(IOMUXC_EIM_WAIT)), GPIO_ALT1);
+
+		/* Configure green LED GPIO pin direction */
+		setbits_le32(((uint32_t *)(GPIO5_BASE + GPIO_GDIR)),
+			     GPIO_GREEN);
+		/* Turn on green LED */
+		setbits_le32(((uint32_t *)(GPIO5_BASE + GPIO_DR)), GPIO_GREEN);
+	}
+
+	/*
+	 * This BOOTSTAGE_ID is called just before handling execution to kernel
+	 * - i.e. gpio subsystem is already initialized
+	 */
+	if (status == BOOTSTAGE_ID_BOOTM_HANDOFF) {
+		/*
+		 * Off green LED - the same approach - i.e. non dm gpio
+		 * (*bits_le32) is used as in the very early stage.
+		 */
+		clrbits_le32(((uint32_t *)(GPIO5_BASE + GPIO_DR)),
+			     GPIO_GREEN);
+
+		/*
+		 * On red LED
+		 */
+		gpio_request(LED_RED, "LED_RED_ERROR");
+		gpio_direction_output(LED_RED, 1);
+	}
+}
diff --git a/board/phytec/phycore_imx8mm/Kconfig b/board/phytec/phycore_imx8mm/Kconfig
new file mode 100644
index 0000000..92f5524
--- /dev/null
+++ b/board/phytec/phycore_imx8mm/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_PHYCORE_IMX8MM
+
+config SYS_BOARD
+	default "phycore_imx8mm"
+
+config SYS_VENDOR
+	default "phytec"
+
+config SYS_CONFIG_NAME
+	default "phycore_imx8mm"
+
+endif
diff --git a/board/phytec/phycore_imx8mm/MAINTAINERS b/board/phytec/phycore_imx8mm/MAINTAINERS
new file mode 100644
index 0000000..9edec7b
--- /dev/null
+++ b/board/phytec/phycore_imx8mm/MAINTAINERS
@@ -0,0 +1,9 @@
+phyCORE-i.MX8M Mini
+M:      Teresa Remmet <t.remmet@phytec.de>
+W:      https://www.phytec.eu/product-eu/system-on-modules/phycore-imx-8m-mini-nano/
+S:      Maintained
+F:      arch/arm/dts/phycore-imx8mm.dts
+F:      arch/arm/dts/phycore-imx8mm-u-boot.dtsi
+F:      board/phytec/phycore_imx8mm/
+F:      configs/phycore-imx8mm_defconfig
+F:      include/configs/phycore_imx8mm.h
diff --git a/board/phytec/phycore_imx8mm/Makefile b/board/phytec/phycore_imx8mm/Makefile
new file mode 100644
index 0000000..27f6c02
--- /dev/null
+++ b/board/phytec/phycore_imx8mm/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (C) 2019-2020 PHYTEC Messtechnik GmbH
+# Author: Teresa Remmet <t.remmet@phytec.de>
+
+obj-y += phycore-imx8mm.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o
+endif
diff --git a/board/phytec/phycore_imx8mm/lpddr4_timing.c b/board/phytec/phycore_imx8mm/lpddr4_timing.c
new file mode 100644
index 0000000..811ac26
--- /dev/null
+++ b/board/phytec/phycore_imx8mm/lpddr4_timing.c
@@ -0,0 +1,1846 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ *
+ * Generated code from MX8M_DDR_tool
+ */
+
+#include <linux/kernel.h>
+#include <asm/arch/ddr.h>
+
+static struct dram_cfg_param ddr_ddrc_cfg[] = {
+	/** Initialize DDRC registers **/
+	{0x3d400304, 0x1},
+	{0x3d400030, 0x1},
+	{0x3d400000, 0xa1080020},
+	{0x3d400020, 0x223},
+	{0x3d400024, 0x3a980},
+	{0x3d400064, 0x5b00d2},
+	{0x3d4000d0, 0xc00305ba},
+	{0x3d4000d4, 0x940000},
+	{0x3d4000dc, 0xd4002d},
+	{0x3d4000e0, 0x310000},
+	{0x3d4000e8, 0x66004d},
+	{0x3d4000ec, 0x16004d},
+	{0x3d400100, 0x191e1920},
+	{0x3d400104, 0x60630},
+	{0x3d40010c, 0xb0b000},
+	{0x3d400110, 0xe04080e},
+	{0x3d400114, 0x2040c0c},
+	{0x3d400118, 0x1010007},
+	{0x3d40011c, 0x401},
+	{0x3d400130, 0x20600},
+	{0x3d400134, 0xc100002},
+	{0x3d400138, 0xd8},
+	{0x3d400144, 0x96004b},
+	{0x3d400180, 0x2ee0017},
+	{0x3d400184, 0x2605b8e},
+	{0x3d400188, 0x0},
+	{0x3d400190, 0x497820a},
+	{0x3d400194, 0x80303},
+	{0x3d4001b4, 0x170a},
+	{0x3d4001a0, 0xe0400018},
+	{0x3d4001a4, 0xdf00e4},
+	{0x3d4001a8, 0x80000000},
+	{0x3d4001b0, 0x11},
+	{0x3d4001c0, 0x1},
+	{0x3d4001c4, 0x1},
+	{0x3d4000f4, 0xc99},
+	{0x3d400108, 0x70e1617},
+	{0x3d400200, 0x1f},
+	{0x3d40020c, 0x0},
+	{0x3d400210, 0x1f1f},
+	{0x3d400204, 0x80808},
+	{0x3d400214, 0x7070707},
+	{0x3d400218, 0x7070707},
+	{0x3d400250, 0x29001701},
+	{0x3d400254, 0x2c},
+	{0x3d40025c, 0x4000030},
+	{0x3d400264, 0x900093e7},
+	{0x3d40026c, 0x2005574},
+	{0x3d400400, 0x111},
+	{0x3d400408, 0x72ff},
+	{0x3d400494, 0x2100e07},
+	{0x3d400498, 0x620096},
+	{0x3d40049c, 0x1100e07},
+	{0x3d4004a0, 0xc8012c},
+	{0x3d402020, 0x21},
+	{0x3d402024, 0x7d00},
+	{0x3d402050, 0x20d040},
+	{0x3d402064, 0xc001c},
+	{0x3d4020dc, 0x840000},
+	{0x3d4020e0, 0x310000},
+	{0x3d4020e8, 0x66004d},
+	{0x3d4020ec, 0x16004d},
+	{0x3d402100, 0xa040305},
+	{0x3d402104, 0x30407},
+	{0x3d402108, 0x203060b},
+	{0x3d40210c, 0x505000},
+	{0x3d402110, 0x2040202},
+	{0x3d402114, 0x2030202},
+	{0x3d402118, 0x1010004},
+	{0x3d40211c, 0x301},
+	{0x3d402130, 0x20300},
+	{0x3d402134, 0xa100002},
+	{0x3d402138, 0x1d},
+	{0x3d402144, 0x14000a},
+	{0x3d402180, 0x640004},
+	{0x3d402190, 0x3818200},
+	{0x3d402194, 0x80303},
+	{0x3d4021b4, 0x100},
+	{0x3d4020f4, 0xc99},
+	{0x3d403020, 0x21},
+	{0x3d403024, 0x1f40},
+	{0x3d403050, 0x20d040},
+	{0x3d403064, 0x30007},
+	{0x3d4030dc, 0x840000},
+	{0x3d4030e0, 0x310000},
+	{0x3d4030e8, 0x66004d},
+	{0x3d4030ec, 0x16004d},
+	{0x3d403100, 0xa010102},
+	{0x3d403104, 0x30404},
+	{0x3d403108, 0x203060b},
+	{0x3d40310c, 0x505000},
+	{0x3d403110, 0x2040202},
+	{0x3d403114, 0x2030202},
+	{0x3d403118, 0x1010004},
+	{0x3d40311c, 0x301},
+	{0x3d403130, 0x20300},
+	{0x3d403134, 0xa100002},
+	{0x3d403138, 0x8},
+	{0x3d403144, 0x50003},
+	{0x3d403180, 0x190004},
+	{0x3d403190, 0x3818200},
+	{0x3d403194, 0x80303},
+	{0x3d4031b4, 0x100},
+	{0x3d4030f4, 0xc99},
+	{0x3d400028, 0x0},
+};
+
+/* PHY Initialize Configuration */
+static struct dram_cfg_param ddr_ddrphy_cfg[] = {
+	{0x100a0, 0x0},
+	{0x100a1, 0x1},
+	{0x100a2, 0x2},
+	{0x100a3, 0x3},
+	{0x100a4, 0x4},
+	{0x100a5, 0x5},
+	{0x100a6, 0x6},
+	{0x100a7, 0x7},
+	{0x110a0, 0x0},
+	{0x110a1, 0x1},
+	{0x110a2, 0x3},
+	{0x110a3, 0x4},
+	{0x110a4, 0x5},
+	{0x110a5, 0x2},
+	{0x110a6, 0x7},
+	{0x110a7, 0x6},
+	{0x120a0, 0x0},
+	{0x120a1, 0x1},
+	{0x120a2, 0x3},
+	{0x120a3, 0x2},
+	{0x120a4, 0x5},
+	{0x120a5, 0x4},
+	{0x120a6, 0x7},
+	{0x120a7, 0x6},
+	{0x130a0, 0x0},
+	{0x130a1, 0x1},
+	{0x130a2, 0x2},
+	{0x130a3, 0x3},
+	{0x130a4, 0x4},
+	{0x130a5, 0x5},
+	{0x130a6, 0x6},
+	{0x130a7, 0x7},
+	{0x1005f, 0x1ff},
+	{0x1015f, 0x1ff},
+	{0x1105f, 0x1ff},
+	{0x1115f, 0x1ff},
+	{0x1205f, 0x1ff},
+	{0x1215f, 0x1ff},
+	{0x1305f, 0x1ff},
+	{0x1315f, 0x1ff},
+	{0x11005f, 0x1ff},
+	{0x11015f, 0x1ff},
+	{0x11105f, 0x1ff},
+	{0x11115f, 0x1ff},
+	{0x11205f, 0x1ff},
+	{0x11215f, 0x1ff},
+	{0x11305f, 0x1ff},
+	{0x11315f, 0x1ff},
+	{0x21005f, 0x1ff},
+	{0x21015f, 0x1ff},
+	{0x21105f, 0x1ff},
+	{0x21115f, 0x1ff},
+	{0x21205f, 0x1ff},
+	{0x21215f, 0x1ff},
+	{0x21305f, 0x1ff},
+	{0x21315f, 0x1ff},
+	{0x55, 0x1ff},
+	{0x1055, 0x1ff},
+	{0x2055, 0x1ff},
+	{0x3055, 0x1ff},
+	{0x4055, 0x1ff},
+	{0x5055, 0x1ff},
+	{0x6055, 0x1ff},
+	{0x7055, 0x1ff},
+	{0x8055, 0x1ff},
+	{0x9055, 0x1ff},
+	{0x200c5, 0x19},
+	{0x1200c5, 0x7},
+	{0x2200c5, 0x7},
+	{0x2002e, 0x2},
+	{0x12002e, 0x2},
+	{0x22002e, 0x2},
+	{0x90204, 0x0},
+	{0x190204, 0x0},
+	{0x290204, 0x0},
+	{0x20024, 0x1ab},
+	{0x2003a, 0x0},
+	{0x120024, 0x1ab},
+	{0x2003a, 0x0},
+	{0x220024, 0x1ab},
+	{0x2003a, 0x0},
+	{0x20056, 0x3},
+	{0x120056, 0xa},
+	{0x220056, 0xa},
+	{0x1004d, 0xe00},
+	{0x1014d, 0xe00},
+	{0x1104d, 0xe00},
+	{0x1114d, 0xe00},
+	{0x1204d, 0xe00},
+	{0x1214d, 0xe00},
+	{0x1304d, 0xe00},
+	{0x1314d, 0xe00},
+	{0x11004d, 0xe00},
+	{0x11014d, 0xe00},
+	{0x11104d, 0xe00},
+	{0x11114d, 0xe00},
+	{0x11204d, 0xe00},
+	{0x11214d, 0xe00},
+	{0x11304d, 0xe00},
+	{0x11314d, 0xe00},
+	{0x21004d, 0xe00},
+	{0x21014d, 0xe00},
+	{0x21104d, 0xe00},
+	{0x21114d, 0xe00},
+	{0x21204d, 0xe00},
+	{0x21214d, 0xe00},
+	{0x21304d, 0xe00},
+	{0x21314d, 0xe00},
+	{0x10049, 0xeba},
+	{0x10149, 0xeba},
+	{0x11049, 0xeba},
+	{0x11149, 0xeba},
+	{0x12049, 0xeba},
+	{0x12149, 0xeba},
+	{0x13049, 0xeba},
+	{0x13149, 0xeba},
+	{0x110049, 0xeba},
+	{0x110149, 0xeba},
+	{0x111049, 0xeba},
+	{0x111149, 0xeba},
+	{0x112049, 0xeba},
+	{0x112149, 0xeba},
+	{0x113049, 0xeba},
+	{0x113149, 0xeba},
+	{0x210049, 0xeba},
+	{0x210149, 0xeba},
+	{0x211049, 0xeba},
+	{0x211149, 0xeba},
+	{0x212049, 0xeba},
+	{0x212149, 0xeba},
+	{0x213049, 0xeba},
+	{0x213149, 0xeba},
+	{0x43, 0x63},
+	{0x1043, 0x63},
+	{0x2043, 0x63},
+	{0x3043, 0x63},
+	{0x4043, 0x63},
+	{0x5043, 0x63},
+	{0x6043, 0x63},
+	{0x7043, 0x63},
+	{0x8043, 0x63},
+	{0x9043, 0x63},
+	{0x20018, 0x3},
+	{0x20075, 0x4},
+	{0x20050, 0x0},
+	{0x20008, 0x2ee},
+	{0x120008, 0x64},
+	{0x220008, 0x19},
+	{0x20088, 0x9},
+	{0x200b2, 0xdc},
+	{0x10043, 0x5a1},
+	{0x10143, 0x5a1},
+	{0x11043, 0x5a1},
+	{0x11143, 0x5a1},
+	{0x12043, 0x5a1},
+	{0x12143, 0x5a1},
+	{0x13043, 0x5a1},
+	{0x13143, 0x5a1},
+	{0x1200b2, 0xdc},
+	{0x110043, 0x5a1},
+	{0x110143, 0x5a1},
+	{0x111043, 0x5a1},
+	{0x111143, 0x5a1},
+	{0x112043, 0x5a1},
+	{0x112143, 0x5a1},
+	{0x113043, 0x5a1},
+	{0x113143, 0x5a1},
+	{0x2200b2, 0xdc},
+	{0x210043, 0x5a1},
+	{0x210143, 0x5a1},
+	{0x211043, 0x5a1},
+	{0x211143, 0x5a1},
+	{0x212043, 0x5a1},
+	{0x212143, 0x5a1},
+	{0x213043, 0x5a1},
+	{0x213143, 0x5a1},
+	{0x200fa, 0x1},
+	{0x1200fa, 0x1},
+	{0x2200fa, 0x1},
+	{0x20019, 0x1},
+	{0x120019, 0x1},
+	{0x220019, 0x1},
+	{0x200f0, 0x660},
+	{0x200f1, 0x0},
+	{0x200f2, 0x4444},
+	{0x200f3, 0x8888},
+	{0x200f4, 0x5665},
+	{0x200f5, 0x0},
+	{0x200f6, 0x0},
+	{0x200f7, 0xf000},
+	{0x20025, 0x0},
+	{0x2002d, 0x0},
+	{0x12002d, 0x0},
+	{0x22002d, 0x0},
+	{0x200c7, 0x21},
+	{0x1200c7, 0x21},
+	{0x2200c7, 0x21},
+	{0x200ca, 0x24},
+	{0x1200ca, 0x24},
+	{0x2200ca, 0x24},
+};
+
+/* ddr phy trained csr */
+static struct dram_cfg_param ddr_ddrphy_trained_csr[] = {
+	{ 0x200b2, 0x0 },
+	{ 0x1200b2, 0x0 },
+	{ 0x2200b2, 0x0 },
+	{ 0x200cb, 0x0 },
+	{ 0x10043, 0x0 },
+	{ 0x110043, 0x0 },
+	{ 0x210043, 0x0 },
+	{ 0x10143, 0x0 },
+	{ 0x110143, 0x0 },
+	{ 0x210143, 0x0 },
+	{ 0x11043, 0x0 },
+	{ 0x111043, 0x0 },
+	{ 0x211043, 0x0 },
+	{ 0x11143, 0x0 },
+	{ 0x111143, 0x0 },
+	{ 0x211143, 0x0 },
+	{ 0x12043, 0x0 },
+	{ 0x112043, 0x0 },
+	{ 0x212043, 0x0 },
+	{ 0x12143, 0x0 },
+	{ 0x112143, 0x0 },
+	{ 0x212143, 0x0 },
+	{ 0x13043, 0x0 },
+	{ 0x113043, 0x0 },
+	{ 0x213043, 0x0 },
+	{ 0x13143, 0x0 },
+	{ 0x113143, 0x0 },
+	{ 0x213143, 0x0 },
+	{ 0x80, 0x0 },
+	{ 0x100080, 0x0 },
+	{ 0x200080, 0x0 },
+	{ 0x1080, 0x0 },
+	{ 0x101080, 0x0 },
+	{ 0x201080, 0x0 },
+	{ 0x2080, 0x0 },
+	{ 0x102080, 0x0 },
+	{ 0x202080, 0x0 },
+	{ 0x3080, 0x0 },
+	{ 0x103080, 0x0 },
+	{ 0x203080, 0x0 },
+	{ 0x4080, 0x0 },
+	{ 0x104080, 0x0 },
+	{ 0x204080, 0x0 },
+	{ 0x5080, 0x0 },
+	{ 0x105080, 0x0 },
+	{ 0x205080, 0x0 },
+	{ 0x6080, 0x0 },
+	{ 0x106080, 0x0 },
+	{ 0x206080, 0x0 },
+	{ 0x7080, 0x0 },
+	{ 0x107080, 0x0 },
+	{ 0x207080, 0x0 },
+	{ 0x8080, 0x0 },
+	{ 0x108080, 0x0 },
+	{ 0x208080, 0x0 },
+	{ 0x9080, 0x0 },
+	{ 0x109080, 0x0 },
+	{ 0x209080, 0x0 },
+	{ 0x10080, 0x0 },
+	{ 0x110080, 0x0 },
+	{ 0x210080, 0x0 },
+	{ 0x10180, 0x0 },
+	{ 0x110180, 0x0 },
+	{ 0x210180, 0x0 },
+	{ 0x11080, 0x0 },
+	{ 0x111080, 0x0 },
+	{ 0x211080, 0x0 },
+	{ 0x11180, 0x0 },
+	{ 0x111180, 0x0 },
+	{ 0x211180, 0x0 },
+	{ 0x12080, 0x0 },
+	{ 0x112080, 0x0 },
+	{ 0x212080, 0x0 },
+	{ 0x12180, 0x0 },
+	{ 0x112180, 0x0 },
+	{ 0x212180, 0x0 },
+	{ 0x13080, 0x0 },
+	{ 0x113080, 0x0 },
+	{ 0x213080, 0x0 },
+	{ 0x13180, 0x0 },
+	{ 0x113180, 0x0 },
+	{ 0x213180, 0x0 },
+	{ 0x10081, 0x0 },
+	{ 0x110081, 0x0 },
+	{ 0x210081, 0x0 },
+	{ 0x10181, 0x0 },
+	{ 0x110181, 0x0 },
+	{ 0x210181, 0x0 },
+	{ 0x11081, 0x0 },
+	{ 0x111081, 0x0 },
+	{ 0x211081, 0x0 },
+	{ 0x11181, 0x0 },
+	{ 0x111181, 0x0 },
+	{ 0x211181, 0x0 },
+	{ 0x12081, 0x0 },
+	{ 0x112081, 0x0 },
+	{ 0x212081, 0x0 },
+	{ 0x12181, 0x0 },
+	{ 0x112181, 0x0 },
+	{ 0x212181, 0x0 },
+	{ 0x13081, 0x0 },
+	{ 0x113081, 0x0 },
+	{ 0x213081, 0x0 },
+	{ 0x13181, 0x0 },
+	{ 0x113181, 0x0 },
+	{ 0x213181, 0x0 },
+	{ 0x100d0, 0x0 },
+	{ 0x1100d0, 0x0 },
+	{ 0x2100d0, 0x0 },
+	{ 0x101d0, 0x0 },
+	{ 0x1101d0, 0x0 },
+	{ 0x2101d0, 0x0 },
+	{ 0x110d0, 0x0 },
+	{ 0x1110d0, 0x0 },
+	{ 0x2110d0, 0x0 },
+	{ 0x111d0, 0x0 },
+	{ 0x1111d0, 0x0 },
+	{ 0x2111d0, 0x0 },
+	{ 0x120d0, 0x0 },
+	{ 0x1120d0, 0x0 },
+	{ 0x2120d0, 0x0 },
+	{ 0x121d0, 0x0 },
+	{ 0x1121d0, 0x0 },
+	{ 0x2121d0, 0x0 },
+	{ 0x130d0, 0x0 },
+	{ 0x1130d0, 0x0 },
+	{ 0x2130d0, 0x0 },
+	{ 0x131d0, 0x0 },
+	{ 0x1131d0, 0x0 },
+	{ 0x2131d0, 0x0 },
+	{ 0x100d1, 0x0 },
+	{ 0x1100d1, 0x0 },
+	{ 0x2100d1, 0x0 },
+	{ 0x101d1, 0x0 },
+	{ 0x1101d1, 0x0 },
+	{ 0x2101d1, 0x0 },
+	{ 0x110d1, 0x0 },
+	{ 0x1110d1, 0x0 },
+	{ 0x2110d1, 0x0 },
+	{ 0x111d1, 0x0 },
+	{ 0x1111d1, 0x0 },
+	{ 0x2111d1, 0x0 },
+	{ 0x120d1, 0x0 },
+	{ 0x1120d1, 0x0 },
+	{ 0x2120d1, 0x0 },
+	{ 0x121d1, 0x0 },
+	{ 0x1121d1, 0x0 },
+	{ 0x2121d1, 0x0 },
+	{ 0x130d1, 0x0 },
+	{ 0x1130d1, 0x0 },
+	{ 0x2130d1, 0x0 },
+	{ 0x131d1, 0x0 },
+	{ 0x1131d1, 0x0 },
+	{ 0x2131d1, 0x0 },
+	{ 0x10068, 0x0 },
+	{ 0x10168, 0x0 },
+	{ 0x10268, 0x0 },
+	{ 0x10368, 0x0 },
+	{ 0x10468, 0x0 },
+	{ 0x10568, 0x0 },
+	{ 0x10668, 0x0 },
+	{ 0x10768, 0x0 },
+	{ 0x10868, 0x0 },
+	{ 0x11068, 0x0 },
+	{ 0x11168, 0x0 },
+	{ 0x11268, 0x0 },
+	{ 0x11368, 0x0 },
+	{ 0x11468, 0x0 },
+	{ 0x11568, 0x0 },
+	{ 0x11668, 0x0 },
+	{ 0x11768, 0x0 },
+	{ 0x11868, 0x0 },
+	{ 0x12068, 0x0 },
+	{ 0x12168, 0x0 },
+	{ 0x12268, 0x0 },
+	{ 0x12368, 0x0 },
+	{ 0x12468, 0x0 },
+	{ 0x12568, 0x0 },
+	{ 0x12668, 0x0 },
+	{ 0x12768, 0x0 },
+	{ 0x12868, 0x0 },
+	{ 0x13068, 0x0 },
+	{ 0x13168, 0x0 },
+	{ 0x13268, 0x0 },
+	{ 0x13368, 0x0 },
+	{ 0x13468, 0x0 },
+	{ 0x13568, 0x0 },
+	{ 0x13668, 0x0 },
+	{ 0x13768, 0x0 },
+	{ 0x13868, 0x0 },
+	{ 0x10069, 0x0 },
+	{ 0x10169, 0x0 },
+	{ 0x10269, 0x0 },
+	{ 0x10369, 0x0 },
+	{ 0x10469, 0x0 },
+	{ 0x10569, 0x0 },
+	{ 0x10669, 0x0 },
+	{ 0x10769, 0x0 },
+	{ 0x10869, 0x0 },
+	{ 0x11069, 0x0 },
+	{ 0x11169, 0x0 },
+	{ 0x11269, 0x0 },
+	{ 0x11369, 0x0 },
+	{ 0x11469, 0x0 },
+	{ 0x11569, 0x0 },
+	{ 0x11669, 0x0 },
+	{ 0x11769, 0x0 },
+	{ 0x11869, 0x0 },
+	{ 0x12069, 0x0 },
+	{ 0x12169, 0x0 },
+	{ 0x12269, 0x0 },
+	{ 0x12369, 0x0 },
+	{ 0x12469, 0x0 },
+	{ 0x12569, 0x0 },
+	{ 0x12669, 0x0 },
+	{ 0x12769, 0x0 },
+	{ 0x12869, 0x0 },
+	{ 0x13069, 0x0 },
+	{ 0x13169, 0x0 },
+	{ 0x13269, 0x0 },
+	{ 0x13369, 0x0 },
+	{ 0x13469, 0x0 },
+	{ 0x13569, 0x0 },
+	{ 0x13669, 0x0 },
+	{ 0x13769, 0x0 },
+	{ 0x13869, 0x0 },
+	{ 0x1008c, 0x0 },
+	{ 0x11008c, 0x0 },
+	{ 0x21008c, 0x0 },
+	{ 0x1018c, 0x0 },
+	{ 0x11018c, 0x0 },
+	{ 0x21018c, 0x0 },
+	{ 0x1108c, 0x0 },
+	{ 0x11108c, 0x0 },
+	{ 0x21108c, 0x0 },
+	{ 0x1118c, 0x0 },
+	{ 0x11118c, 0x0 },
+	{ 0x21118c, 0x0 },
+	{ 0x1208c, 0x0 },
+	{ 0x11208c, 0x0 },
+	{ 0x21208c, 0x0 },
+	{ 0x1218c, 0x0 },
+	{ 0x11218c, 0x0 },
+	{ 0x21218c, 0x0 },
+	{ 0x1308c, 0x0 },
+	{ 0x11308c, 0x0 },
+	{ 0x21308c, 0x0 },
+	{ 0x1318c, 0x0 },
+	{ 0x11318c, 0x0 },
+	{ 0x21318c, 0x0 },
+	{ 0x1008d, 0x0 },
+	{ 0x11008d, 0x0 },
+	{ 0x21008d, 0x0 },
+	{ 0x1018d, 0x0 },
+	{ 0x11018d, 0x0 },
+	{ 0x21018d, 0x0 },
+	{ 0x1108d, 0x0 },
+	{ 0x11108d, 0x0 },
+	{ 0x21108d, 0x0 },
+	{ 0x1118d, 0x0 },
+	{ 0x11118d, 0x0 },
+	{ 0x21118d, 0x0 },
+	{ 0x1208d, 0x0 },
+	{ 0x11208d, 0x0 },
+	{ 0x21208d, 0x0 },
+	{ 0x1218d, 0x0 },
+	{ 0x11218d, 0x0 },
+	{ 0x21218d, 0x0 },
+	{ 0x1308d, 0x0 },
+	{ 0x11308d, 0x0 },
+	{ 0x21308d, 0x0 },
+	{ 0x1318d, 0x0 },
+	{ 0x11318d, 0x0 },
+	{ 0x21318d, 0x0 },
+	{ 0x100c0, 0x0 },
+	{ 0x1100c0, 0x0 },
+	{ 0x2100c0, 0x0 },
+	{ 0x101c0, 0x0 },
+	{ 0x1101c0, 0x0 },
+	{ 0x2101c0, 0x0 },
+	{ 0x102c0, 0x0 },
+	{ 0x1102c0, 0x0 },
+	{ 0x2102c0, 0x0 },
+	{ 0x103c0, 0x0 },
+	{ 0x1103c0, 0x0 },
+	{ 0x2103c0, 0x0 },
+	{ 0x104c0, 0x0 },
+	{ 0x1104c0, 0x0 },
+	{ 0x2104c0, 0x0 },
+	{ 0x105c0, 0x0 },
+	{ 0x1105c0, 0x0 },
+	{ 0x2105c0, 0x0 },
+	{ 0x106c0, 0x0 },
+	{ 0x1106c0, 0x0 },
+	{ 0x2106c0, 0x0 },
+	{ 0x107c0, 0x0 },
+	{ 0x1107c0, 0x0 },
+	{ 0x2107c0, 0x0 },
+	{ 0x108c0, 0x0 },
+	{ 0x1108c0, 0x0 },
+	{ 0x2108c0, 0x0 },
+	{ 0x110c0, 0x0 },
+	{ 0x1110c0, 0x0 },
+	{ 0x2110c0, 0x0 },
+	{ 0x111c0, 0x0 },
+	{ 0x1111c0, 0x0 },
+	{ 0x2111c0, 0x0 },
+	{ 0x112c0, 0x0 },
+	{ 0x1112c0, 0x0 },
+	{ 0x2112c0, 0x0 },
+	{ 0x113c0, 0x0 },
+	{ 0x1113c0, 0x0 },
+	{ 0x2113c0, 0x0 },
+	{ 0x114c0, 0x0 },
+	{ 0x1114c0, 0x0 },
+	{ 0x2114c0, 0x0 },
+	{ 0x115c0, 0x0 },
+	{ 0x1115c0, 0x0 },
+	{ 0x2115c0, 0x0 },
+	{ 0x116c0, 0x0 },
+	{ 0x1116c0, 0x0 },
+	{ 0x2116c0, 0x0 },
+	{ 0x117c0, 0x0 },
+	{ 0x1117c0, 0x0 },
+	{ 0x2117c0, 0x0 },
+	{ 0x118c0, 0x0 },
+	{ 0x1118c0, 0x0 },
+	{ 0x2118c0, 0x0 },
+	{ 0x120c0, 0x0 },
+	{ 0x1120c0, 0x0 },
+	{ 0x2120c0, 0x0 },
+	{ 0x121c0, 0x0 },
+	{ 0x1121c0, 0x0 },
+	{ 0x2121c0, 0x0 },
+	{ 0x122c0, 0x0 },
+	{ 0x1122c0, 0x0 },
+	{ 0x2122c0, 0x0 },
+	{ 0x123c0, 0x0 },
+	{ 0x1123c0, 0x0 },
+	{ 0x2123c0, 0x0 },
+	{ 0x124c0, 0x0 },
+	{ 0x1124c0, 0x0 },
+	{ 0x2124c0, 0x0 },
+	{ 0x125c0, 0x0 },
+	{ 0x1125c0, 0x0 },
+	{ 0x2125c0, 0x0 },
+	{ 0x126c0, 0x0 },
+	{ 0x1126c0, 0x0 },
+	{ 0x2126c0, 0x0 },
+	{ 0x127c0, 0x0 },
+	{ 0x1127c0, 0x0 },
+	{ 0x2127c0, 0x0 },
+	{ 0x128c0, 0x0 },
+	{ 0x1128c0, 0x0 },
+	{ 0x2128c0, 0x0 },
+	{ 0x130c0, 0x0 },
+	{ 0x1130c0, 0x0 },
+	{ 0x2130c0, 0x0 },
+	{ 0x131c0, 0x0 },
+	{ 0x1131c0, 0x0 },
+	{ 0x2131c0, 0x0 },
+	{ 0x132c0, 0x0 },
+	{ 0x1132c0, 0x0 },
+	{ 0x2132c0, 0x0 },
+	{ 0x133c0, 0x0 },
+	{ 0x1133c0, 0x0 },
+	{ 0x2133c0, 0x0 },
+	{ 0x134c0, 0x0 },
+	{ 0x1134c0, 0x0 },
+	{ 0x2134c0, 0x0 },
+	{ 0x135c0, 0x0 },
+	{ 0x1135c0, 0x0 },
+	{ 0x2135c0, 0x0 },
+	{ 0x136c0, 0x0 },
+	{ 0x1136c0, 0x0 },
+	{ 0x2136c0, 0x0 },
+	{ 0x137c0, 0x0 },
+	{ 0x1137c0, 0x0 },
+	{ 0x2137c0, 0x0 },
+	{ 0x138c0, 0x0 },
+	{ 0x1138c0, 0x0 },
+	{ 0x2138c0, 0x0 },
+	{ 0x100c1, 0x0 },
+	{ 0x1100c1, 0x0 },
+	{ 0x2100c1, 0x0 },
+	{ 0x101c1, 0x0 },
+	{ 0x1101c1, 0x0 },
+	{ 0x2101c1, 0x0 },
+	{ 0x102c1, 0x0 },
+	{ 0x1102c1, 0x0 },
+	{ 0x2102c1, 0x0 },
+	{ 0x103c1, 0x0 },
+	{ 0x1103c1, 0x0 },
+	{ 0x2103c1, 0x0 },
+	{ 0x104c1, 0x0 },
+	{ 0x1104c1, 0x0 },
+	{ 0x2104c1, 0x0 },
+	{ 0x105c1, 0x0 },
+	{ 0x1105c1, 0x0 },
+	{ 0x2105c1, 0x0 },
+	{ 0x106c1, 0x0 },
+	{ 0x1106c1, 0x0 },
+	{ 0x2106c1, 0x0 },
+	{ 0x107c1, 0x0 },
+	{ 0x1107c1, 0x0 },
+	{ 0x2107c1, 0x0 },
+	{ 0x108c1, 0x0 },
+	{ 0x1108c1, 0x0 },
+	{ 0x2108c1, 0x0 },
+	{ 0x110c1, 0x0 },
+	{ 0x1110c1, 0x0 },
+	{ 0x2110c1, 0x0 },
+	{ 0x111c1, 0x0 },
+	{ 0x1111c1, 0x0 },
+	{ 0x2111c1, 0x0 },
+	{ 0x112c1, 0x0 },
+	{ 0x1112c1, 0x0 },
+	{ 0x2112c1, 0x0 },
+	{ 0x113c1, 0x0 },
+	{ 0x1113c1, 0x0 },
+	{ 0x2113c1, 0x0 },
+	{ 0x114c1, 0x0 },
+	{ 0x1114c1, 0x0 },
+	{ 0x2114c1, 0x0 },
+	{ 0x115c1, 0x0 },
+	{ 0x1115c1, 0x0 },
+	{ 0x2115c1, 0x0 },
+	{ 0x116c1, 0x0 },
+	{ 0x1116c1, 0x0 },
+	{ 0x2116c1, 0x0 },
+	{ 0x117c1, 0x0 },
+	{ 0x1117c1, 0x0 },
+	{ 0x2117c1, 0x0 },
+	{ 0x118c1, 0x0 },
+	{ 0x1118c1, 0x0 },
+	{ 0x2118c1, 0x0 },
+	{ 0x120c1, 0x0 },
+	{ 0x1120c1, 0x0 },
+	{ 0x2120c1, 0x0 },
+	{ 0x121c1, 0x0 },
+	{ 0x1121c1, 0x0 },
+	{ 0x2121c1, 0x0 },
+	{ 0x122c1, 0x0 },
+	{ 0x1122c1, 0x0 },
+	{ 0x2122c1, 0x0 },
+	{ 0x123c1, 0x0 },
+	{ 0x1123c1, 0x0 },
+	{ 0x2123c1, 0x0 },
+	{ 0x124c1, 0x0 },
+	{ 0x1124c1, 0x0 },
+	{ 0x2124c1, 0x0 },
+	{ 0x125c1, 0x0 },
+	{ 0x1125c1, 0x0 },
+	{ 0x2125c1, 0x0 },
+	{ 0x126c1, 0x0 },
+	{ 0x1126c1, 0x0 },
+	{ 0x2126c1, 0x0 },
+	{ 0x127c1, 0x0 },
+	{ 0x1127c1, 0x0 },
+	{ 0x2127c1, 0x0 },
+	{ 0x128c1, 0x0 },
+	{ 0x1128c1, 0x0 },
+	{ 0x2128c1, 0x0 },
+	{ 0x130c1, 0x0 },
+	{ 0x1130c1, 0x0 },
+	{ 0x2130c1, 0x0 },
+	{ 0x131c1, 0x0 },
+	{ 0x1131c1, 0x0 },
+	{ 0x2131c1, 0x0 },
+	{ 0x132c1, 0x0 },
+	{ 0x1132c1, 0x0 },
+	{ 0x2132c1, 0x0 },
+	{ 0x133c1, 0x0 },
+	{ 0x1133c1, 0x0 },
+	{ 0x2133c1, 0x0 },
+	{ 0x134c1, 0x0 },
+	{ 0x1134c1, 0x0 },
+	{ 0x2134c1, 0x0 },
+	{ 0x135c1, 0x0 },
+	{ 0x1135c1, 0x0 },
+	{ 0x2135c1, 0x0 },
+	{ 0x136c1, 0x0 },
+	{ 0x1136c1, 0x0 },
+	{ 0x2136c1, 0x0 },
+	{ 0x137c1, 0x0 },
+	{ 0x1137c1, 0x0 },
+	{ 0x2137c1, 0x0 },
+	{ 0x138c1, 0x0 },
+	{ 0x1138c1, 0x0 },
+	{ 0x2138c1, 0x0 },
+	{ 0x10020, 0x0 },
+	{ 0x110020, 0x0 },
+	{ 0x210020, 0x0 },
+	{ 0x11020, 0x0 },
+	{ 0x111020, 0x0 },
+	{ 0x211020, 0x0 },
+	{ 0x12020, 0x0 },
+	{ 0x112020, 0x0 },
+	{ 0x212020, 0x0 },
+	{ 0x13020, 0x0 },
+	{ 0x113020, 0x0 },
+	{ 0x213020, 0x0 },
+	{ 0x20072, 0x0 },
+	{ 0x20073, 0x0 },
+	{ 0x20074, 0x0 },
+	{ 0x100aa, 0x0 },
+	{ 0x110aa, 0x0 },
+	{ 0x120aa, 0x0 },
+	{ 0x130aa, 0x0 },
+	{ 0x20010, 0x0 },
+	{ 0x120010, 0x0 },
+	{ 0x220010, 0x0 },
+	{ 0x20011, 0x0 },
+	{ 0x120011, 0x0 },
+	{ 0x220011, 0x0 },
+	{ 0x100ae, 0x0 },
+	{ 0x1100ae, 0x0 },
+	{ 0x2100ae, 0x0 },
+	{ 0x100af, 0x0 },
+	{ 0x1100af, 0x0 },
+	{ 0x2100af, 0x0 },
+	{ 0x110ae, 0x0 },
+	{ 0x1110ae, 0x0 },
+	{ 0x2110ae, 0x0 },
+	{ 0x110af, 0x0 },
+	{ 0x1110af, 0x0 },
+	{ 0x2110af, 0x0 },
+	{ 0x120ae, 0x0 },
+	{ 0x1120ae, 0x0 },
+	{ 0x2120ae, 0x0 },
+	{ 0x120af, 0x0 },
+	{ 0x1120af, 0x0 },
+	{ 0x2120af, 0x0 },
+	{ 0x130ae, 0x0 },
+	{ 0x1130ae, 0x0 },
+	{ 0x2130ae, 0x0 },
+	{ 0x130af, 0x0 },
+	{ 0x1130af, 0x0 },
+	{ 0x2130af, 0x0 },
+	{ 0x20020, 0x0 },
+	{ 0x120020, 0x0 },
+	{ 0x220020, 0x0 },
+	{ 0x100a0, 0x0 },
+	{ 0x100a1, 0x0 },
+	{ 0x100a2, 0x0 },
+	{ 0x100a3, 0x0 },
+	{ 0x100a4, 0x0 },
+	{ 0x100a5, 0x0 },
+	{ 0x100a6, 0x0 },
+	{ 0x100a7, 0x0 },
+	{ 0x110a0, 0x0 },
+	{ 0x110a1, 0x0 },
+	{ 0x110a2, 0x0 },
+	{ 0x110a3, 0x0 },
+	{ 0x110a4, 0x0 },
+	{ 0x110a5, 0x0 },
+	{ 0x110a6, 0x0 },
+	{ 0x110a7, 0x0 },
+	{ 0x120a0, 0x0 },
+	{ 0x120a1, 0x0 },
+	{ 0x120a2, 0x0 },
+	{ 0x120a3, 0x0 },
+	{ 0x120a4, 0x0 },
+	{ 0x120a5, 0x0 },
+	{ 0x120a6, 0x0 },
+	{ 0x120a7, 0x0 },
+	{ 0x130a0, 0x0 },
+	{ 0x130a1, 0x0 },
+	{ 0x130a2, 0x0 },
+	{ 0x130a3, 0x0 },
+	{ 0x130a4, 0x0 },
+	{ 0x130a5, 0x0 },
+	{ 0x130a6, 0x0 },
+	{ 0x130a7, 0x0 },
+	{ 0x2007c, 0x0 },
+	{ 0x12007c, 0x0 },
+	{ 0x22007c, 0x0 },
+	{ 0x2007d, 0x0 },
+	{ 0x12007d, 0x0 },
+	{ 0x22007d, 0x0 },
+	{ 0x400fd, 0x0 },
+	{ 0x400c0, 0x0 },
+	{ 0x90201, 0x0 },
+	{ 0x190201, 0x0 },
+	{ 0x290201, 0x0 },
+	{ 0x90202, 0x0 },
+	{ 0x190202, 0x0 },
+	{ 0x290202, 0x0 },
+	{ 0x90203, 0x0 },
+	{ 0x190203, 0x0 },
+	{ 0x290203, 0x0 },
+	{ 0x90204, 0x0 },
+	{ 0x190204, 0x0 },
+	{ 0x290204, 0x0 },
+	{ 0x90205, 0x0 },
+	{ 0x190205, 0x0 },
+	{ 0x290205, 0x0 },
+	{ 0x90206, 0x0 },
+	{ 0x190206, 0x0 },
+	{ 0x290206, 0x0 },
+	{ 0x90207, 0x0 },
+	{ 0x190207, 0x0 },
+	{ 0x290207, 0x0 },
+	{ 0x90208, 0x0 },
+	{ 0x190208, 0x0 },
+	{ 0x290208, 0x0 },
+	{ 0x10062, 0x0 },
+	{ 0x10162, 0x0 },
+	{ 0x10262, 0x0 },
+	{ 0x10362, 0x0 },
+	{ 0x10462, 0x0 },
+	{ 0x10562, 0x0 },
+	{ 0x10662, 0x0 },
+	{ 0x10762, 0x0 },
+	{ 0x10862, 0x0 },
+	{ 0x11062, 0x0 },
+	{ 0x11162, 0x0 },
+	{ 0x11262, 0x0 },
+	{ 0x11362, 0x0 },
+	{ 0x11462, 0x0 },
+	{ 0x11562, 0x0 },
+	{ 0x11662, 0x0 },
+	{ 0x11762, 0x0 },
+	{ 0x11862, 0x0 },
+	{ 0x12062, 0x0 },
+	{ 0x12162, 0x0 },
+	{ 0x12262, 0x0 },
+	{ 0x12362, 0x0 },
+	{ 0x12462, 0x0 },
+	{ 0x12562, 0x0 },
+	{ 0x12662, 0x0 },
+	{ 0x12762, 0x0 },
+	{ 0x12862, 0x0 },
+	{ 0x13062, 0x0 },
+	{ 0x13162, 0x0 },
+	{ 0x13262, 0x0 },
+	{ 0x13362, 0x0 },
+	{ 0x13462, 0x0 },
+	{ 0x13562, 0x0 },
+	{ 0x13662, 0x0 },
+	{ 0x13762, 0x0 },
+	{ 0x13862, 0x0 },
+	{ 0x20077, 0x0 },
+	{ 0x10001, 0x0 },
+	{ 0x11001, 0x0 },
+	{ 0x12001, 0x0 },
+	{ 0x13001, 0x0 },
+	{ 0x10040, 0x0 },
+	{ 0x10140, 0x0 },
+	{ 0x10240, 0x0 },
+	{ 0x10340, 0x0 },
+	{ 0x10440, 0x0 },
+	{ 0x10540, 0x0 },
+	{ 0x10640, 0x0 },
+	{ 0x10740, 0x0 },
+	{ 0x10840, 0x0 },
+	{ 0x10030, 0x0 },
+	{ 0x10130, 0x0 },
+	{ 0x10230, 0x0 },
+	{ 0x10330, 0x0 },
+	{ 0x10430, 0x0 },
+	{ 0x10530, 0x0 },
+	{ 0x10630, 0x0 },
+	{ 0x10730, 0x0 },
+	{ 0x10830, 0x0 },
+	{ 0x11040, 0x0 },
+	{ 0x11140, 0x0 },
+	{ 0x11240, 0x0 },
+	{ 0x11340, 0x0 },
+	{ 0x11440, 0x0 },
+	{ 0x11540, 0x0 },
+	{ 0x11640, 0x0 },
+	{ 0x11740, 0x0 },
+	{ 0x11840, 0x0 },
+	{ 0x11030, 0x0 },
+	{ 0x11130, 0x0 },
+	{ 0x11230, 0x0 },
+	{ 0x11330, 0x0 },
+	{ 0x11430, 0x0 },
+	{ 0x11530, 0x0 },
+	{ 0x11630, 0x0 },
+	{ 0x11730, 0x0 },
+	{ 0x11830, 0x0 },
+	{ 0x12040, 0x0 },
+	{ 0x12140, 0x0 },
+	{ 0x12240, 0x0 },
+	{ 0x12340, 0x0 },
+	{ 0x12440, 0x0 },
+	{ 0x12540, 0x0 },
+	{ 0x12640, 0x0 },
+	{ 0x12740, 0x0 },
+	{ 0x12840, 0x0 },
+	{ 0x12030, 0x0 },
+	{ 0x12130, 0x0 },
+	{ 0x12230, 0x0 },
+	{ 0x12330, 0x0 },
+	{ 0x12430, 0x0 },
+	{ 0x12530, 0x0 },
+	{ 0x12630, 0x0 },
+	{ 0x12730, 0x0 },
+	{ 0x12830, 0x0 },
+	{ 0x13040, 0x0 },
+	{ 0x13140, 0x0 },
+	{ 0x13240, 0x0 },
+	{ 0x13340, 0x0 },
+	{ 0x13440, 0x0 },
+	{ 0x13540, 0x0 },
+	{ 0x13640, 0x0 },
+	{ 0x13740, 0x0 },
+	{ 0x13840, 0x0 },
+	{ 0x13030, 0x0 },
+	{ 0x13130, 0x0 },
+	{ 0x13230, 0x0 },
+	{ 0x13330, 0x0 },
+	{ 0x13430, 0x0 },
+	{ 0x13530, 0x0 },
+	{ 0x13630, 0x0 },
+	{ 0x13730, 0x0 },
+	{ 0x13830, 0x0 },
+};
+
+/* P0 message block paremeter for training firmware */
+struct dram_cfg_param ddr_fsp0_cfg[] = {
+	{0xd0000, 0x0},
+	{0x54003, 0xbb8},
+	{0x54004, 0x2},
+	{0x54005, 0x2228},
+	{0x54006, 0x11},
+	{0x54008, 0x131f},
+	{0x54009, 0xc8},
+	{0x5400b, 0x2},
+	{0x5400d, 0x100},
+	{0x54012, 0x110},
+	{0x54019, 0x2dd4},
+	{0x5401a, 0x31},
+	{0x5401b, 0x4d66},
+	{0x5401c, 0x4d00},
+	{0x5401e, 0x16},
+	{0x5401f, 0x2dd4},
+	{0x54020, 0x31},
+	{0x54021, 0x4d66},
+	{0x54022, 0x4d00},
+	{0x54024, 0x16},
+	{0x5402b, 0x1000},
+	{0x5402c, 0x1},
+	{0x54032, 0xd400},
+	{0x54033, 0x312d},
+	{0x54034, 0x6600},
+	{0x54035, 0x4d},
+	{0x54036, 0x4d},
+	{0x54037, 0x1600},
+	{0x54038, 0xd400},
+	{0x54039, 0x312d},
+	{0x5403a, 0x6600},
+	{0x5403b, 0x4d},
+	{0x5403c, 0x4d},
+	{0x5403d, 0x1600},
+	{0xd0000, 0x1},
+};
+
+/* P1 message block paremeter for training firmware */
+static struct dram_cfg_param ddr_fsp1_cfg[] = {
+	{0xd0000, 0x0},
+	{0x54002, 0x101},
+	{0x54003, 0x190},
+	{0x54004, 0x2},
+	{0x54005, 0x2228},
+	{0x54006, 0x11},
+	{0x54008, 0x121f},
+	{0x54009, 0xc8},
+	{0x5400b, 0x2},
+	{0x5400d, 0x100},
+	{0x54012, 0x110},
+	{0x54019, 0x84},
+	{0x5401a, 0x31},
+	{0x5401b, 0x4d66},
+	{0x5401c, 0x4d00},
+	{0x5401e, 0x16},
+	{0x5401f, 0x84},
+	{0x54020, 0x31},
+	{0x54021, 0x4d66},
+	{0x54022, 0x4d00},
+	{0x54024, 0x16},
+	{0x5402b, 0x1000},
+	{0x5402c, 0x1},
+	{0x54032, 0x8400},
+	{0x54033, 0x3100},
+	{0x54034, 0x6600},
+	{0x54035, 0x4d},
+	{0x54036, 0x4d},
+	{0x54037, 0x1600},
+	{0x54038, 0x8400},
+	{0x54039, 0x3100},
+	{0x5403a, 0x6600},
+	{0x5403b, 0x4d},
+	{0x5403c, 0x4d},
+	{0x5403d, 0x1600},
+	{0xd0000, 0x1},
+};
+
+/* P2 message block paremeter for training firmware */
+static struct dram_cfg_param ddr_fsp2_cfg[] = {
+	{0xd0000, 0x0},
+	{0x54002, 0x102},
+	{0x54003, 0x64},
+	{0x54004, 0x2},
+	{0x54005, 0x2228},
+	{0x54006, 0x11},
+	{0x54008, 0x121f},
+	{0x54009, 0xc8},
+	{0x5400b, 0x2},
+	{0x5400d, 0x100},
+	{0x54012, 0x110},
+	{0x54019, 0x84},
+	{0x5401a, 0x31},
+	{0x5401b, 0x4d66},
+	{0x5401c, 0x4d00},
+	{0x5401e, 0x16},
+	{0x5401f, 0x84},
+	{0x54020, 0x31},
+	{0x54021, 0x4d66},
+	{0x54022, 0x4d00},
+	{0x54024, 0x16},
+	{0x5402b, 0x1000},
+	{0x5402c, 0x1},
+	{0x54032, 0x8400},
+	{0x54033, 0x3100},
+	{0x54034, 0x6600},
+	{0x54035, 0x4d},
+	{0x54036, 0x4d},
+	{0x54037, 0x1600},
+	{0x54038, 0x8400},
+	{0x54039, 0x3100},
+	{0x5403a, 0x6600},
+	{0x5403b, 0x4d},
+	{0x5403c, 0x4d},
+	{0x5403d, 0x1600},
+	{0xd0000, 0x1},
+};
+
+/* P0 2D message block paremeter for training firmware */
+static struct dram_cfg_param ddr_fsp0_2d_cfg[] = {
+	{0xd0000, 0x0},
+	{0x54003, 0xbb8},
+	{0x54004, 0x2},
+	{0x54005, 0x2228},
+	{0x54006, 0x11},
+	{0x54008, 0x61},
+	{0x54009, 0xc8},
+	{0x5400b, 0x2},
+	{0x5400f, 0x100},
+	{0x54010, 0x1f7f},
+	{0x54012, 0x110},
+	{0x54019, 0x2dd4},
+	{0x5401a, 0x31},
+	{0x5401b, 0x4d66},
+	{0x5401c, 0x4d00},
+	{0x5401e, 0x16},
+	{0x5401f, 0x2dd4},
+	{0x54020, 0x31},
+	{0x54021, 0x4d66},
+	{0x54022, 0x4d00},
+	{0x54024, 0x16},
+	{0x5402b, 0x1000},
+	{0x5402c, 0x1},
+	{0x54032, 0xd400},
+	{0x54033, 0x312d},
+	{0x54034, 0x6600},
+	{0x54035, 0x4d},
+	{0x54036, 0x4d},
+	{0x54037, 0x1600},
+	{0x54038, 0xd400},
+	{0x54039, 0x312d},
+	{0x5403a, 0x6600},
+	{0x5403b, 0x4d},
+	{0x5403c, 0x4d},
+	{0x5403d, 0x1600},
+	{ 0xd0000, 0x1 },
+};
+
+/* DRAM PHY init engine image */
+static struct dram_cfg_param ddr_phy_pie[] = {
+	{0xd0000, 0x0},
+	{0x90000, 0x10},
+	{0x90001, 0x400},
+	{0x90002, 0x10e},
+	{0x90003, 0x0},
+	{0x90004, 0x0},
+	{0x90005, 0x8},
+	{0x90029, 0xb},
+	{0x9002a, 0x480},
+	{0x9002b, 0x109},
+	{0x9002c, 0x8},
+	{0x9002d, 0x448},
+	{0x9002e, 0x139},
+	{0x9002f, 0x8},
+	{0x90030, 0x478},
+	{0x90031, 0x109},
+	{0x90032, 0x0},
+	{0x90033, 0xe8},
+	{0x90034, 0x109},
+	{0x90035, 0x2},
+	{0x90036, 0x10},
+	{0x90037, 0x139},
+	{0x90038, 0xf},
+	{0x90039, 0x7c0},
+	{0x9003a, 0x139},
+	{0x9003b, 0x44},
+	{0x9003c, 0x630},
+	{0x9003d, 0x159},
+	{0x9003e, 0x14f},
+	{0x9003f, 0x630},
+	{0x90040, 0x159},
+	{0x90041, 0x47},
+	{0x90042, 0x630},
+	{0x90043, 0x149},
+	{0x90044, 0x4f},
+	{0x90045, 0x630},
+	{0x90046, 0x179},
+	{0x90047, 0x8},
+	{0x90048, 0xe0},
+	{0x90049, 0x109},
+	{0x9004a, 0x0},
+	{0x9004b, 0x7c8},
+	{0x9004c, 0x109},
+	{0x9004d, 0x0},
+	{0x9004e, 0x1},
+	{0x9004f, 0x8},
+	{0x90050, 0x0},
+	{0x90051, 0x45a},
+	{0x90052, 0x9},
+	{0x90053, 0x0},
+	{0x90054, 0x448},
+	{0x90055, 0x109},
+	{0x90056, 0x40},
+	{0x90057, 0x630},
+	{0x90058, 0x179},
+	{0x90059, 0x1},
+	{0x9005a, 0x618},
+	{0x9005b, 0x109},
+	{0x9005c, 0x40c0},
+	{0x9005d, 0x630},
+	{0x9005e, 0x149},
+	{0x9005f, 0x8},
+	{0x90060, 0x4},
+	{0x90061, 0x48},
+	{0x90062, 0x4040},
+	{0x90063, 0x630},
+	{0x90064, 0x149},
+	{0x90065, 0x0},
+	{0x90066, 0x4},
+	{0x90067, 0x48},
+	{0x90068, 0x40},
+	{0x90069, 0x630},
+	{0x9006a, 0x149},
+	{0x9006b, 0x10},
+	{0x9006c, 0x4},
+	{0x9006d, 0x18},
+	{0x9006e, 0x0},
+	{0x9006f, 0x4},
+	{0x90070, 0x78},
+	{0x90071, 0x549},
+	{0x90072, 0x630},
+	{0x90073, 0x159},
+	{0x90074, 0xd49},
+	{0x90075, 0x630},
+	{0x90076, 0x159},
+	{0x90077, 0x94a},
+	{0x90078, 0x630},
+	{0x90079, 0x159},
+	{0x9007a, 0x441},
+	{0x9007b, 0x630},
+	{0x9007c, 0x149},
+	{0x9007d, 0x42},
+	{0x9007e, 0x630},
+	{0x9007f, 0x149},
+	{0x90080, 0x1},
+	{0x90081, 0x630},
+	{0x90082, 0x149},
+	{0x90083, 0x0},
+	{0x90084, 0xe0},
+	{0x90085, 0x109},
+	{0x90086, 0xa},
+	{0x90087, 0x10},
+	{0x90088, 0x109},
+	{0x90089, 0x9},
+	{0x9008a, 0x3c0},
+	{0x9008b, 0x149},
+	{0x9008c, 0x9},
+	{0x9008d, 0x3c0},
+	{0x9008e, 0x159},
+	{0x9008f, 0x18},
+	{0x90090, 0x10},
+	{0x90091, 0x109},
+	{0x90092, 0x0},
+	{0x90093, 0x3c0},
+	{0x90094, 0x109},
+	{0x90095, 0x18},
+	{0x90096, 0x4},
+	{0x90097, 0x48},
+	{0x90098, 0x18},
+	{0x90099, 0x4},
+	{0x9009a, 0x58},
+	{0x9009b, 0xa},
+	{0x9009c, 0x10},
+	{0x9009d, 0x109},
+	{0x9009e, 0x2},
+	{0x9009f, 0x10},
+	{0x900a0, 0x109},
+	{0x900a1, 0x5},
+	{0x900a2, 0x7c0},
+	{0x900a3, 0x109},
+	{0x900a4, 0x10},
+	{0x900a5, 0x10},
+	{0x900a6, 0x109},
+	{0x40000, 0x811},
+	{0x40020, 0x880},
+	{0x40040, 0x0},
+	{0x40060, 0x0},
+	{0x40001, 0x4008},
+	{0x40021, 0x83},
+	{0x40041, 0x4f},
+	{0x40061, 0x0},
+	{0x40002, 0x4040},
+	{0x40022, 0x83},
+	{0x40042, 0x51},
+	{0x40062, 0x0},
+	{0x40003, 0x811},
+	{0x40023, 0x880},
+	{0x40043, 0x0},
+	{0x40063, 0x0},
+	{0x40004, 0x720},
+	{0x40024, 0xf},
+	{0x40044, 0x1740},
+	{0x40064, 0x0},
+	{0x40005, 0x16},
+	{0x40025, 0x83},
+	{0x40045, 0x4b},
+	{0x40065, 0x0},
+	{0x40006, 0x716},
+	{0x40026, 0xf},
+	{0x40046, 0x2001},
+	{0x40066, 0x0},
+	{0x40007, 0x716},
+	{0x40027, 0xf},
+	{0x40047, 0x2800},
+	{0x40067, 0x0},
+	{0x40008, 0x716},
+	{0x40028, 0xf},
+	{0x40048, 0xf00},
+	{0x40068, 0x0},
+	{0x40009, 0x720},
+	{0x40029, 0xf},
+	{0x40049, 0x1400},
+	{0x40069, 0x0},
+	{0x4000a, 0xe08},
+	{0x4002a, 0xc15},
+	{0x4004a, 0x0},
+	{0x4006a, 0x0},
+	{0x4000b, 0x623},
+	{0x4002b, 0x15},
+	{0x4004b, 0x0},
+	{0x4006b, 0x0},
+	{0x4000c, 0x4028},
+	{0x4002c, 0x80},
+	{0x4004c, 0x0},
+	{0x4006c, 0x0},
+	{0x4000d, 0xe08},
+	{0x4002d, 0xc1a},
+	{0x4004d, 0x0},
+	{0x4006d, 0x0},
+	{0x4000e, 0x623},
+	{0x4002e, 0x1a},
+	{0x4004e, 0x0},
+	{0x4006e, 0x0},
+	{0x4000f, 0x4040},
+	{0x4002f, 0x80},
+	{0x4004f, 0x0},
+	{0x4006f, 0x0},
+	{0x40010, 0x2604},
+	{0x40030, 0x15},
+	{0x40050, 0x0},
+	{0x40070, 0x0},
+	{0x40011, 0x708},
+	{0x40031, 0x5},
+	{0x40051, 0x0},
+	{0x40071, 0x2002},
+	{0x40012, 0x8},
+	{0x40032, 0x80},
+	{0x40052, 0x0},
+	{0x40072, 0x0},
+	{0x40013, 0x2604},
+	{0x40033, 0x1a},
+	{0x40053, 0x0},
+	{0x40073, 0x0},
+	{0x40014, 0x708},
+	{0x40034, 0xa},
+	{0x40054, 0x0},
+	{0x40074, 0x2002},
+	{0x40015, 0x4040},
+	{0x40035, 0x80},
+	{0x40055, 0x0},
+	{0x40075, 0x0},
+	{0x40016, 0x60a},
+	{0x40036, 0x15},
+	{0x40056, 0x1200},
+	{0x40076, 0x0},
+	{0x40017, 0x61a},
+	{0x40037, 0x15},
+	{0x40057, 0x1300},
+	{0x40077, 0x0},
+	{0x40018, 0x60a},
+	{0x40038, 0x1a},
+	{0x40058, 0x1200},
+	{0x40078, 0x0},
+	{0x40019, 0x642},
+	{0x40039, 0x1a},
+	{0x40059, 0x1300},
+	{0x40079, 0x0},
+	{0x4001a, 0x4808},
+	{0x4003a, 0x880},
+	{0x4005a, 0x0},
+	{0x4007a, 0x0},
+	{0x900a7, 0x0},
+	{0x900a8, 0x790},
+	{0x900a9, 0x11a},
+	{0x900aa, 0x8},
+	{0x900ab, 0x7aa},
+	{0x900ac, 0x2a},
+	{0x900ad, 0x10},
+	{0x900ae, 0x7b2},
+	{0x900af, 0x2a},
+	{0x900b0, 0x0},
+	{0x900b1, 0x7c8},
+	{0x900b2, 0x109},
+	{0x900b3, 0x10},
+	{0x900b4, 0x2a8},
+	{0x900b5, 0x129},
+	{0x900b6, 0x8},
+	{0x900b7, 0x370},
+	{0x900b8, 0x129},
+	{0x900b9, 0xa},
+	{0x900ba, 0x3c8},
+	{0x900bb, 0x1a9},
+	{0x900bc, 0xc},
+	{0x900bd, 0x408},
+	{0x900be, 0x199},
+	{0x900bf, 0x14},
+	{0x900c0, 0x790},
+	{0x900c1, 0x11a},
+	{0x900c2, 0x8},
+	{0x900c3, 0x4},
+	{0x900c4, 0x18},
+	{0x900c5, 0xe},
+	{0x900c6, 0x408},
+	{0x900c7, 0x199},
+	{0x900c8, 0x8},
+	{0x900c9, 0x8568},
+	{0x900ca, 0x108},
+	{0x900cb, 0x18},
+	{0x900cc, 0x790},
+	{0x900cd, 0x16a},
+	{0x900ce, 0x8},
+	{0x900cf, 0x1d8},
+	{0x900d0, 0x169},
+	{0x900d1, 0x10},
+	{0x900d2, 0x8558},
+	{0x900d3, 0x168},
+	{0x900d4, 0x70},
+	{0x900d5, 0x788},
+	{0x900d6, 0x16a},
+	{0x900d7, 0x1ff8},
+	{0x900d8, 0x85a8},
+	{0x900d9, 0x1e8},
+	{0x900da, 0x50},
+	{0x900db, 0x798},
+	{0x900dc, 0x16a},
+	{0x900dd, 0x60},
+	{0x900de, 0x7a0},
+	{0x900df, 0x16a},
+	{0x900e0, 0x8},
+	{0x900e1, 0x8310},
+	{0x900e2, 0x168},
+	{0x900e3, 0x8},
+	{0x900e4, 0xa310},
+	{0x900e5, 0x168},
+	{0x900e6, 0xa},
+	{0x900e7, 0x408},
+	{0x900e8, 0x169},
+	{0x900e9, 0x6e},
+	{0x900ea, 0x0},
+	{0x900eb, 0x68},
+	{0x900ec, 0x0},
+	{0x900ed, 0x408},
+	{0x900ee, 0x169},
+	{0x900ef, 0x0},
+	{0x900f0, 0x8310},
+	{0x900f1, 0x168},
+	{0x900f2, 0x0},
+	{0x900f3, 0xa310},
+	{0x900f4, 0x168},
+	{0x900f5, 0x1ff8},
+	{0x900f6, 0x85a8},
+	{0x900f7, 0x1e8},
+	{0x900f8, 0x68},
+	{0x900f9, 0x798},
+	{0x900fa, 0x16a},
+	{0x900fb, 0x78},
+	{0x900fc, 0x7a0},
+	{0x900fd, 0x16a},
+	{0x900fe, 0x68},
+	{0x900ff, 0x790},
+	{0x90100, 0x16a},
+	{0x90101, 0x8},
+	{0x90102, 0x8b10},
+	{0x90103, 0x168},
+	{0x90104, 0x8},
+	{0x90105, 0xab10},
+	{0x90106, 0x168},
+	{0x90107, 0xa},
+	{0x90108, 0x408},
+	{0x90109, 0x169},
+	{0x9010a, 0x58},
+	{0x9010b, 0x0},
+	{0x9010c, 0x68},
+	{0x9010d, 0x0},
+	{0x9010e, 0x408},
+	{0x9010f, 0x169},
+	{0x90110, 0x0},
+	{0x90111, 0x8b10},
+	{0x90112, 0x168},
+	{0x90113, 0x0},
+	{0x90114, 0xab10},
+	{0x90115, 0x168},
+	{0x90116, 0x0},
+	{0x90117, 0x1d8},
+	{0x90118, 0x169},
+	{0x90119, 0x80},
+	{0x9011a, 0x790},
+	{0x9011b, 0x16a},
+	{0x9011c, 0x18},
+	{0x9011d, 0x7aa},
+	{0x9011e, 0x6a},
+	{0x9011f, 0xa},
+	{0x90120, 0x0},
+	{0x90121, 0x1e9},
+	{0x90122, 0x8},
+	{0x90123, 0x8080},
+	{0x90124, 0x108},
+	{0x90125, 0xf},
+	{0x90126, 0x408},
+	{0x90127, 0x169},
+	{0x90128, 0xc},
+	{0x90129, 0x0},
+	{0x9012a, 0x68},
+	{0x9012b, 0x9},
+	{0x9012c, 0x0},
+	{0x9012d, 0x1a9},
+	{0x9012e, 0x0},
+	{0x9012f, 0x408},
+	{0x90130, 0x169},
+	{0x90131, 0x0},
+	{0x90132, 0x8080},
+	{0x90133, 0x108},
+	{0x90134, 0x8},
+	{0x90135, 0x7aa},
+	{0x90136, 0x6a},
+	{0x90137, 0x0},
+	{0x90138, 0x8568},
+	{0x90139, 0x108},
+	{0x9013a, 0xb7},
+	{0x9013b, 0x790},
+	{0x9013c, 0x16a},
+	{0x9013d, 0x1f},
+	{0x9013e, 0x0},
+	{0x9013f, 0x68},
+	{0x90140, 0x8},
+	{0x90141, 0x8558},
+	{0x90142, 0x168},
+	{0x90143, 0xf},
+	{0x90144, 0x408},
+	{0x90145, 0x169},
+	{0x90146, 0xc},
+	{0x90147, 0x0},
+	{0x90148, 0x68},
+	{0x90149, 0x0},
+	{0x9014a, 0x408},
+	{0x9014b, 0x169},
+	{0x9014c, 0x0},
+	{0x9014d, 0x8558},
+	{0x9014e, 0x168},
+	{0x9014f, 0x8},
+	{0x90150, 0x3c8},
+	{0x90151, 0x1a9},
+	{0x90152, 0x3},
+	{0x90153, 0x370},
+	{0x90154, 0x129},
+	{0x90155, 0x20},
+	{0x90156, 0x2aa},
+	{0x90157, 0x9},
+	{0x90158, 0x0},
+	{0x90159, 0x400},
+	{0x9015a, 0x10e},
+	{0x9015b, 0x8},
+	{0x9015c, 0xe8},
+	{0x9015d, 0x109},
+	{0x9015e, 0x0},
+	{0x9015f, 0x8140},
+	{0x90160, 0x10c},
+	{0x90161, 0x10},
+	{0x90162, 0x8138},
+	{0x90163, 0x10c},
+	{0x90164, 0x8},
+	{0x90165, 0x7c8},
+	{0x90166, 0x101},
+	{0x90167, 0x8},
+	{0x90168, 0x0},
+	{0x90169, 0x8},
+	{0x9016a, 0x8},
+	{0x9016b, 0x448},
+	{0x9016c, 0x109},
+	{0x9016d, 0xf},
+	{0x9016e, 0x7c0},
+	{0x9016f, 0x109},
+	{0x90170, 0x0},
+	{0x90171, 0xe8},
+	{0x90172, 0x109},
+	{0x90173, 0x47},
+	{0x90174, 0x630},
+	{0x90175, 0x109},
+	{0x90176, 0x8},
+	{0x90177, 0x618},
+	{0x90178, 0x109},
+	{0x90179, 0x8},
+	{0x9017a, 0xe0},
+	{0x9017b, 0x109},
+	{0x9017c, 0x0},
+	{0x9017d, 0x7c8},
+	{0x9017e, 0x109},
+	{0x9017f, 0x8},
+	{0x90180, 0x8140},
+	{0x90181, 0x10c},
+	{0x90182, 0x0},
+	{0x90183, 0x1},
+	{0x90184, 0x8},
+	{0x90185, 0x8},
+	{0x90186, 0x4},
+	{0x90187, 0x8},
+	{0x90188, 0x8},
+	{0x90189, 0x7c8},
+	{0x9018a, 0x101},
+	{0x90006, 0x0},
+	{0x90007, 0x0},
+	{0x90008, 0x8},
+	{0x90009, 0x0},
+	{0x9000a, 0x0},
+	{0x9000b, 0x0},
+	{0xd00e7, 0x400},
+	{0x90017, 0x0},
+	{0x9001f, 0x2a},
+	{0x90026, 0x6a},
+	{0x400d0, 0x0},
+	{0x400d1, 0x101},
+	{0x400d2, 0x105},
+	{0x400d3, 0x107},
+	{0x400d4, 0x10f},
+	{0x400d5, 0x202},
+	{0x400d6, 0x20a},
+	{0x400d7, 0x20b},
+	{0x2003a, 0x2},
+	{0x2000b, 0x5d},
+	{0x2000c, 0xbb},
+	{0x2000d, 0x753},
+	{0x2000e, 0x2c},
+	{0x12000b, 0xc},
+	{0x12000c, 0x19},
+	{0x12000d, 0xfa},
+	{0x12000e, 0x10},
+	{0x22000b, 0x3},
+	{0x22000c, 0x6},
+	{0x22000d, 0x3e},
+	{0x22000e, 0x10},
+	{0x9000c, 0x0},
+	{0x9000d, 0x173},
+	{0x9000e, 0x60},
+	{0x9000f, 0x6110},
+	{0x90010, 0x2152},
+	{0x90011, 0xdfbd},
+	{0x90012, 0x60},
+	{0x90013, 0x6152},
+	{0x20010, 0x5a},
+	{0x20011, 0x3},
+	{0x120010, 0x5a},
+	{0x120011, 0x3},
+	{0x220010, 0x5a},
+	{0x220011, 0x3},
+	{0x40080, 0xe0},
+	{0x40081, 0x12},
+	{0x40082, 0xe0},
+	{0x40083, 0x12},
+	{0x40084, 0xe0},
+	{0x40085, 0x12},
+	{0x140080, 0xe0},
+	{0x140081, 0x12},
+	{0x140082, 0xe0},
+	{0x140083, 0x12},
+	{0x140084, 0xe0},
+	{0x140085, 0x12},
+	{0x240080, 0xe0},
+	{0x240081, 0x12},
+	{0x240082, 0xe0},
+	{0x240083, 0x12},
+	{0x240084, 0xe0},
+	{0x240085, 0x12},
+	{0x400fd, 0xf},
+	{0x10011, 0x1},
+	{0x10012, 0x1},
+	{0x10013, 0x180},
+	{0x10018, 0x1},
+	{0x10002, 0x6209},
+	{0x100b2, 0x1},
+	{0x101b4, 0x1},
+	{0x102b4, 0x1},
+	{0x103b4, 0x1},
+	{0x104b4, 0x1},
+	{0x105b4, 0x1},
+	{0x106b4, 0x1},
+	{0x107b4, 0x1},
+	{0x108b4, 0x1},
+	{0x11011, 0x1},
+	{0x11012, 0x1},
+	{0x11013, 0x180},
+	{0x11018, 0x1},
+	{0x11002, 0x6209},
+	{0x110b2, 0x1},
+	{0x111b4, 0x1},
+	{0x112b4, 0x1},
+	{0x113b4, 0x1},
+	{0x114b4, 0x1},
+	{0x115b4, 0x1},
+	{0x116b4, 0x1},
+	{0x117b4, 0x1},
+	{0x118b4, 0x1},
+	{0x12011, 0x1},
+	{0x12012, 0x1},
+	{0x12013, 0x180},
+	{0x12018, 0x1},
+	{0x12002, 0x6209},
+	{0x120b2, 0x1},
+	{0x121b4, 0x1},
+	{0x122b4, 0x1},
+	{0x123b4, 0x1},
+	{0x124b4, 0x1},
+	{0x125b4, 0x1},
+	{0x126b4, 0x1},
+	{0x127b4, 0x1},
+	{0x128b4, 0x1},
+	{0x13011, 0x1},
+	{0x13012, 0x1},
+	{0x13013, 0x180},
+	{0x13018, 0x1},
+	{0x13002, 0x6209},
+	{0x130b2, 0x1},
+	{0x131b4, 0x1},
+	{0x132b4, 0x1},
+	{0x133b4, 0x1},
+	{0x134b4, 0x1},
+	{0x135b4, 0x1},
+	{0x136b4, 0x1},
+	{0x137b4, 0x1},
+	{0x138b4, 0x1},
+	{0x2003a, 0x2},
+	{0xc0080, 0x2},
+	{0xd0000, 0x1}
+};
+
+static struct dram_fsp_msg ddr_dram_fsp_msg[] = {
+	{
+		/* P0 3000mts 1D */
+		.drate = 3000,
+		.fw_type = FW_1D_IMAGE,
+		.fsp_cfg = ddr_fsp0_cfg,
+		.fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg),
+	},
+	{
+		/* P1 400mts 1D */
+		.drate = 400,
+		.fw_type = FW_1D_IMAGE,
+		.fsp_cfg = ddr_fsp1_cfg,
+		.fsp_cfg_num = ARRAY_SIZE(ddr_fsp1_cfg),
+	},
+	{
+		/* P2 100mts 1D */
+		.drate = 100,
+		.fw_type = FW_1D_IMAGE,
+		.fsp_cfg = ddr_fsp2_cfg,
+		.fsp_cfg_num = ARRAY_SIZE(ddr_fsp2_cfg),
+	},
+	{
+		/* P0 3000mts 2D */
+		.drate = 3000,
+		.fw_type = FW_2D_IMAGE,
+		.fsp_cfg = ddr_fsp0_2d_cfg,
+		.fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg),
+	},
+};
+
+/* ddr timing config params */
+struct dram_timing_info dram_timing = {
+	.ddrc_cfg = ddr_ddrc_cfg,
+	.ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg),
+	.ddrphy_cfg = ddr_ddrphy_cfg,
+	.ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg),
+	.fsp_msg = ddr_dram_fsp_msg,
+	.fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg),
+	.ddrphy_trained_csr = ddr_ddrphy_trained_csr,
+	.ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr),
+	.ddrphy_pie = ddr_phy_pie,
+	.ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie),
+	.fsp_table = { 3000, 400, 100, },
+};
diff --git a/board/phytec/phycore_imx8mm/phycore-imx8mm.c b/board/phytec/phycore_imx8mm/phycore-imx8mm.c
new file mode 100644
index 0000000..d2f3d23
--- /dev/null
+++ b/board/phytec/phycore_imx8mm/phycore-imx8mm.c
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019-2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <env.h>
+#include <miiphy.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int setup_fec(void)
+{
+	struct iomuxc_gpr_base_regs *gpr =
+		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+
+	/* Use 125M anatop REF_CLK1 for ENET1, not from external */
+	clrsetbits_le32(&gpr->gpr[1], 0x2000, 0);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	setup_fec();
+
+	return 0;
+}
+
+int board_mmc_get_env_dev(int devno)
+{
+	return devno;
+}
+
+int board_late_init(void)
+{
+	switch (get_boot_device()) {
+	case SD2_BOOT:
+		env_set_ulong("mmcdev", 1);
+		break;
+	case MMC3_BOOT:
+		env_set_ulong("mmcdev", 2);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
diff --git a/board/phytec/phycore_imx8mm/spl.c b/board/phytec/phycore_imx8mm/spl.c
new file mode 100644
index 0000000..863374d
--- /dev/null
+++ b/board/phytec/phycore_imx8mm/spl.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019-2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/imx8mm_pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
+#include <hang.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int spl_board_boot_device(enum boot_device boot_dev_spl)
+{
+	switch (boot_dev_spl) {
+	case SD2_BOOT:
+	case MMC2_BOOT:
+		return BOOT_DEVICE_MMC1;
+	case SD3_BOOT:
+	case MMC3_BOOT:
+		return BOOT_DEVICE_MMC2;
+	case QSPI_BOOT:
+		return BOOT_DEVICE_NOR;
+	case USB_BOOT:
+		return BOOT_DEVICE_BOARD;
+	default:
+		return BOOT_DEVICE_NONE;
+	}
+}
+
+void spl_dram_init(void)
+{
+	ddr_init(&dram_timing);
+}
+
+void spl_board_init(void)
+{
+	/* Serial download mode */
+	if (is_usb_boot()) {
+		puts("Back to ROM, SDP\n");
+		restore_boot_params();
+	}
+	puts("Normal Boot\n");
+}
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+	/* Just empty function now - can't decide what to choose */
+	debug("%s: %s\n", __func__, name);
+
+	return 0;
+}
+#endif
+
+#define UART_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_FSEL1)
+#define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_ODE)
+
+static iomux_v3_cfg_t const uart_pads[] = {
+	IMX8MM_PAD_UART3_RXD_UART3_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	IMX8MM_PAD_UART3_TXD_UART3_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const wdog_pads[] = {
+	IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
+};
+
+int board_early_init_f(void)
+{
+	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
+
+	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
+
+	set_wdog_reset(wdog);
+
+	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+
+	return 0;
+}
+
+void board_init_f(ulong dummy)
+{
+	struct udevice *dev;
+	int ret;
+
+	arch_cpu_init();
+
+	init_uart_clk(2);
+
+	board_early_init_f();
+
+	timer_init();
+
+	preloader_console_init();
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	ret = spl_early_init();
+	if (ret) {
+		debug("spl_early_init() failed: %d\n", ret);
+		hang();
+	}
+
+	ret = uclass_get_device_by_name(UCLASS_CLK,
+					"clock-controller@30380000", &dev);
+	if (ret < 0) {
+		printf("Failed to find clock node. Check device tree\n");
+		hang();
+	}
+
+	enable_tzc380();
+
+	/* DDR initialization */
+	spl_dram_init();
+
+	board_init_r(NULL, 0);
+}
diff --git a/configs/ge_b1x5v2_defconfig b/configs/ge_b1x5v2_defconfig
new file mode 100644
index 0000000..aa33c43
--- /dev/null
+++ b/configs/ge_b1x5v2_defconfig
@@ -0,0 +1,137 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_MX6QDL=y
+CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0xC0000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x11400
+# CONFIG_GE_RTC is not set
+CONFIG_TARGET_GE_B1X5V2=y
+CONFIG_SPL_TEXT_BASE=0x00908000
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_BOOTCOUNT_BOOTLIMIT=10
+CONFIG_SPL=y
+CONFIG_DEBUG_UART_BASE=0x21ec000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_PAYLOAD="u-boot.img"
+CONFIG_DEFAULT_DEVICE_TREE="imx6dl-b1x5v2"
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_BOOTDELAY=1
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_LOG_MAX_LEVEL=8
+CONFIG_LOG_DEFAULT_LEVEL=4
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_DEFAULT_FDT_FILE="imx6dl-b1x5v2.dtb"
+CONFIG_MISC_INIT_R=y
+CONFIG_BOUNCE_BUFFER=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_BOOTCOUNT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_CLS=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_LOG=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_DM_BOOTCOUNT=y
+CONFIG_DM_BOOTCOUNT_SPI_FLASH=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_GPIO=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_FSL_USDHC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_IMX=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_M41T62=y
+CONFIG_DM_SERIAL=y
+CONFIG_MXC_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MXC_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_CMD_POWEROFF=y
+CONFIG_POWEROFF_GPIO=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_IMX_THERMAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Congatec"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_IPUV3=y
+CONFIG_WATCHDOG_TIMEOUT_MSECS=30000
+CONFIG_IMX_WATCHDOG=y
+CONFIG_BCH=y
diff --git a/configs/kp_imx53_defconfig b/configs/kp_imx53_defconfig
index a7ce0f5..7175438 100644
--- a/configs/kp_imx53_defconfig
+++ b/configs/kp_imx53_defconfig
@@ -11,6 +11,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx53-kp"
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx53loco/imximage.cfg"
+CONFIG_SHOW_BOOT_PROGRESS=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_STOP_STR="."
 CONFIG_SILENT_CONSOLE=y
diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
new file mode 100644
index 0000000..86772f4
--- /dev/null
+++ b/configs/phycore-imx8mm_defconfig
@@ -0,0 +1,103 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX8M=y
+CONFIG_SYS_TEXT_BASE=0x40200000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x10000
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x3C0000
+CONFIG_SYS_I2C_MXC_I2C1=y
+CONFIG_SYS_I2C_MXC_I2C2=y
+CONFIG_SYS_I2C_MXC_I2C3=y
+CONFIG_DM_GPIO=y
+CONFIG_SPL_TEXT_BASE=0x7E1000
+CONFIG_TARGET_PHYCORE_IMX8MM=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_ENV_OFFSET_REDUND=0x3E0000
+CONFIG_DEFAULT_DEVICE_TREE="phycore-imx8mm"
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg"
+CONFIG_DEFAULT_FDT_FILE="oftree"
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="u-boot=> "
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_EEPROM=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=2
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_CLK_COMPOSITE_CCF=y
+CONFIG_CLK_COMPOSITE_CCF=y
+CONFIG_SPL_CLK_IMX8MM=y
+CONFIG_CLK_IMX8MM=y
+CONFIG_MXC_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x51
+CONFIG_SYS_EEPROM_SIZE=4096
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
+CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_FSL_ESDHC_IMX=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_TI_DP83867=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX8M=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_MXC_UART=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_WATCHDOG=y
diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig
index 7ebfd67..531d566 100644
--- a/configs/verdin-imx8mm_defconfig
+++ b/configs/verdin-imx8mm_defconfig
@@ -41,7 +41,6 @@ CONFIG_SYS_PROMPT="Verdin iMX8MM # "
 # CONFIG_BOOTM_NETBSD is not set
 CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_EXPORTENV is not set
-# CONFIG_CMD_IMPORTENV is not set
 # CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x40000000
@@ -103,3 +102,4 @@ CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
 CONFIG_IMX_WATCHDOG=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/doc/board/freescale/imx8mm_evk.rst b/doc/board/freescale/imx8mm_evk.rst
new file mode 100644
index 0000000..f751902
--- /dev/null
+++ b/doc/board/freescale/imx8mm_evk.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx8mm_evk
+==========
+
+U-Boot for the NXP i.MX8MM EVK board
+
+Quick Start
+-----------
+
+- Build the ARM Trusted firmware binary
+- Get ddr firmware
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+Note: builddir is U-Boot build directory (source directory for in-tree builds)
+Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
+branch: imx_4.19.35_1.0.0
+
+.. code-block:: bash
+
+   $ make PLAT=imx8mm bl31
+   $ cp build/imx8mm/release/bl31.bin $(builddir)
+
+Get the ddr firmware
+--------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
+   $ chmod +x firmware-imx-8.0.bin
+   $ ./firmware-imx-8.0
+   $ cp firmware-imx-8.0/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+   $ export CROSS_COMPILE=aarch64-poky-linux-
+   $ make imx8mm_evk_defconfig
+   $ export ATF_LOAD_ADDR=0x920000
+   $ make flash.bin
+
+Burn the flash.bin to MicroSD card offset 33KB:
+
+.. code-block:: bash
+
+   $sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc
+
+Boot
+----
+Set Boot switch to SD boot
diff --git a/doc/board/freescale/imx8mn_evk.rst b/doc/board/freescale/imx8mn_evk.rst
new file mode 100644
index 0000000..c3e92ce
--- /dev/null
+++ b/doc/board/freescale/imx8mn_evk.rst
@@ -0,0 +1,57 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx8mn_evk
+==========
+
+U-Boot for the NXP i.MX8MN EVK board
+
+Quick Start
+-----------
+
+- Build the ARM Trusted firmware binary
+- Get firmware-imx package
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+Note: srctree is U-Boot source directory
+Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
+branch: imx_4.19.35_1.1.0
+
+.. code-block:: bash
+
+   $ make PLAT=imx8mn bl31
+   $ cp build/imx8mn/release/bl31.bin $(srctree)
+
+Get the ddr firmware
+--------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.5.bin
+   $ chmod +x firmware-imx-8.5.bin
+   $ ./firmware-imx-8.5
+   $ cp firmware-imx-8.5/firmware/ddr/synopsys/ddr4*.bin $(srctree)
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+   $ export CROSS_COMPILE=aarch64-poky-linux-
+   $ make imx8mn_ddr4_evk_defconfig
+   $ export ATF_LOAD_ADDR=0x960000
+   $ make flash.bin
+
+Burn the flash.bin to MicroSD card offset 32KB:
+
+.. code-block:: bash
+
+   $sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
+
+Boot
+----
+
+Set Boot switch to SD boot
diff --git a/doc/board/freescale/imx8mp_evk.rst b/doc/board/freescale/imx8mp_evk.rst
new file mode 100644
index 0000000..b34742e
--- /dev/null
+++ b/doc/board/freescale/imx8mp_evk.rst
@@ -0,0 +1,61 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx8mp_evk
+==========
+
+U-Boot for the NXP i.MX8MP EVK board
+
+Quick Start
+-----------
+
+- Build the ARM Trusted firmware binary
+- Get the firmware-imx package
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+Note: $(srctree) is the U-Boot source directory
+Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
+branch: imx_5.4.3_2.0.0
+
+.. code-block:: bash
+
+   $ make PLAT=imx8mp bl31
+   $ sudo cp build/imx8mp/release/bl31.bin $(srctree)
+
+Get the ddr firmware
+--------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.7.bin
+   $ chmod +x firmware-imx-8.7.bin
+   $ ./firmware-imx-8.7
+   $ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_1d_dmem.bin
+   $ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_201904.bin $(srctree)/lpddr4_pmu_train_1d_imem.bin
+   $ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_2d_dmem.bin
+   $ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_201904.bin $(srctree)/lpddr4_pmu_train_2d_imem.bin
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+   $ export CROSS_COMPILE=aarch64-poky-linux-
+   $ make imx8mp_evk_defconfig
+   $ export ATF_LOAD_ADDR=0x960000
+   $ make flash.bin
+
+Burn the flash.bin to the MicroSD card at offset 32KB:
+
+.. code-block:: bash
+
+   $sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=32 conv=notrunc; sync
+
+Boot
+----
+
+Set Boot switch to SD boot
+Use /dev/ttyUSB2 for U-Boot console
diff --git a/doc/board/freescale/imx8mq_evk.rst b/doc/board/freescale/imx8mq_evk.rst
new file mode 100644
index 0000000..0a64ecc
--- /dev/null
+++ b/doc/board/freescale/imx8mq_evk.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx8mq_evk
+==========
+
+U-Boot for the NXP i.MX8MQ EVK board
+
+Quick Start
+-----------
+
+- Build the ARM Trusted firmware binary
+- Get ddr and hdmi fimware
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+Note: srctree is U-Boot source directory
+Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
+branch: imx_4.19.35_1.0.0
+
+.. code-block:: bash
+
+   $ make PLAT=imx8mq bl31
+   $ cp build/imx8mq/release/bl31.bin $(builddir)
+
+Get the ddr and hdmi firmware
+-----------------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
+   $ chmod +x firmware-imx-7.9.bin
+   $ ./firmware-imx-7.9.bin
+   $ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
+   $ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+   $ export CROSS_COMPILE=aarch64-poky-linux-
+   $ make imx8mq_evk_defconfig
+   $ make flash.bin
+
+Burn the flash.bin to MicroSD card offset 33KB:
+
+.. code-block:: bash
+
+   $sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc
+
+Boot
+----
+Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
diff --git a/doc/board/freescale/imx8qxp_mek.rst b/doc/board/freescale/imx8qxp_mek.rst
new file mode 100644
index 0000000..215627c
--- /dev/null
+++ b/doc/board/freescale/imx8qxp_mek.rst
@@ -0,0 +1,66 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx8qxp_mek
+===========
+
+U-Boot for the NXP i.MX8QXP EVK board
+
+Quick Start
+-----------
+
+- Build the ARM Trusted firmware binary
+- Get scfw_tcm.bin and ahab-container.img
+- Build U-Boot
+- Flash the binary into the SD card
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+.. code-block:: bash
+
+   $ git clone https://source.codeaurora.org/external/imx/imx-atf
+   $ cd imx-atf/
+   $ git checkout origin/imx_4.19.35_1.1.0 -b imx_4.19.35_1.1.0
+   $ make PLAT=imx8qx bl31
+
+Get scfw_tcm.bin and ahab-container.img
+---------------------------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.2.7.1.bin
+   $ chmod +x imx-sc-firmware-1.2.7.1.bin
+   $ ./imx-sc-firmware-1.2.7.1.bin
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-2.3.1.bin
+   $ chmod +x imx-seco-2.3.1.bin
+   $ ./imx-seco-2.3.1.bin
+
+Copy the following binaries to U-Boot folder:
+
+.. code-block:: bash
+
+  $ cp imx-atf/build/imx8qx/release/bl31.bin .
+  $ cp imx-seco-2.3.1/firmware/seco/mx8qx-ahab-container.img ./ahab-container.img
+  $ cp imx-sc-firmware-1.2.7.1/mx8qx-mek-scfw-tcm.bin	.
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+  $ make imx8qxp_mek_defconfig
+  $ make flash.bin
+
+Flash the binary into the SD card
+---------------------------------
+
+Burn the flash.bin binary to SD card offset 32KB:
+
+.. code-block:: bash
+
+   $ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
+
+Boot
+----
+Set Boot switch SW2: 1100.
diff --git a/doc/board/freescale/imxrt1020-evk.rst b/doc/board/freescale/imxrt1020-evk.rst
new file mode 100644
index 0000000..267f80c
--- /dev/null
+++ b/doc/board/freescale/imxrt1020-evk.rst
@@ -0,0 +1,41 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imxrt1020-evk
+=============
+
+How to use U-Boot on NXP i.MXRT1020 EVK
+---------------------------------------
+
+- Build U-Boot for i.MXRT1020 EVK:
+
+.. code-block:: bash
+
+   $ make mrproper
+   $ make imxrt1020-evk_defconfig
+   $ make
+
+This will generate the SPL image called SPL and the u-boot.img.
+
+- Flash the SPL image into the micro SD card:
+
+.. code-block:: bash
+
+   $sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync
+
+- Flash the u-boot.img image into the micro SD card:
+
+.. code-block:: bash
+
+   $sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync
+
+- Jumper settings::
+
+   SW8: 0 1 1 0
+
+where 0 means bottom position and 1 means top position (from the
+switch label numbers reference).
+
+- Connect the USB cable between the EVK and the PC for the console.
+  The USB console connector is the one close the ethernet connector
+
+- Insert the micro SD card in the board, power it up and U-Boot messages should come up.
diff --git a/doc/board/freescale/imxrt1050-evk.rst b/doc/board/freescale/imxrt1050-evk.rst
new file mode 100644
index 0000000..c1fb48f
--- /dev/null
+++ b/doc/board/freescale/imxrt1050-evk.rst
@@ -0,0 +1,41 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imxrt1050-evk
+=============
+
+How to use U-Boot on NXP i.MXRT1050 EVK
+---------------------------------------
+
+- Build U-Boot for i.MXRT1050 EVK:
+
+.. code-block:: bash
+
+   $ make mrproper
+   $ make imxrt1050-evk_defconfig
+   $ make
+
+This will generate the SPL image called SPL and the u-boot.img.
+
+- Flash the SPL image into the micro SD card:
+
+.. code-block:: bash
+
+   $sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync
+
+- Flash the u-boot.img image into the micro SD card:
+
+.. code-block:: bash
+
+   $sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync
+
+- Jumper settings::
+
+   SW7: 1 0 1 0
+
+where 0 means bottom position and 1 means top position (from the
+switch label numbers reference).
+
+- Connect the USB cable between the EVK and the PC for the console.
+  The USB console connector is the one close the ethernet connector
+
+- Insert the micro SD card in the board, power it up and U-Boot messages should come up.
diff --git a/doc/board/freescale/index.rst b/doc/board/freescale/index.rst
index 8d42b35..313cf40 100644
--- a/doc/board/freescale/index.rst
+++ b/doc/board/freescale/index.rst
@@ -7,3 +7,14 @@ Freescale
    :maxdepth: 2
 
    b4860qds
+   imx8mm_evk
+   imx8mn_evk
+   imx8mp_evk
+   imx8mq_evk
+   imx8qxp_mek
+   imxrt1020-evk
+   imxrt1050-evk
+   mx6sabreauto
+   mx6sabresd
+   mx6ul_14x14_evk
+   mx6ullevk
diff --git a/doc/board/freescale/mx6sabreauto.rst b/doc/board/freescale/mx6sabreauto.rst
new file mode 100644
index 0000000..fe4cd9d
--- /dev/null
+++ b/doc/board/freescale/mx6sabreauto.rst
@@ -0,0 +1,100 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+mx6sabreauto
+============
+
+How to use and build U-Boot on mx6sabreauto
+-------------------------------------------
+
+mx6sabreauto_defconfig target supports mx6q/mx6dl/mx6qp sabreauto variants.
+
+In order to build it:
+
+.. code-block:: bash
+
+   $ make mx6sabreauto_defconfig
+   $ make
+
+This will generate the SPL and u-boot-dtb.img binaries.
+
+- Flash the SPL binary into the SD card:
+
+.. code-block:: bash
+
+   $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 conv=notrunc && sync
+
+- Flash the u-boot-dtb.img binary into the SD card:
+
+.. code-block:: bash
+
+   $ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 conv=notrunc && sync
+
+Booting via Falcon mode
+-----------------------
+
+Write in mx6sabreauto_defconfig the following define below:
+
+CONFIG_SPL_OS_BOOT=y
+
+In order to build it:
+
+.. code-block:: bash
+
+   $ make mx6sabreauto_defconfig
+   $ make
+
+This will generate the SPL image called SPL and the u-boot-dtb.img.
+
+- Flash the SPL image into the SD card:
+
+.. code-block:: bash
+
+   $ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 conv=notrunc && sync
+
+- Flash the u-boot-dtb.img image into the SD card:
+
+.. code-block:: bash
+
+   $ sudo dd if=u-boot-dtb.img of=/dev/sdb bs=1K seek=69 conv=notrunc && sync
+
+Create a FAT16 boot partition to store uImage and the dtb file, then copy the files there:
+
+.. code-block:: bash
+
+   $ sudo cp uImage /media/boot
+   $ sudo cp imx6dl-sabreauto.dtb /media/boot
+
+Create a partition for root file system and extract it there:
+
+.. code-block:: bash
+
+   $ sudo tar xvf rootfs.tar.gz -C /media/root
+
+The SD card must have enough space for raw "args" and "kernel".
+To configure Falcon mode for the first time, on U-Boot do the following commands:
+
+- Load dtb file from boot partition::
+
+   # load mmc 0:1 ${fdt_addr} imx6dl-sabreauto.dtb
+
+- Load kernel image from boot partition::
+
+   # load mmc 0:1 ${loadaddr} uImage
+
+- Write kernel at 2MB offset::
+
+   # mmc write ${loadaddr} 0x1000 0x4000
+
+- Setup kernel bootargs::
+
+   # setenv bootargs "console=ttymxc3,115200 root=/dev/mmcblk0p1 rootfstype=ext4 rootwait quiet rw"
+
+- Prepare args::
+
+   # spl export fdt ${loadaddr} - ${fdt_addr}
+
+- Write args 1MB data (0x800 sectors) to 1MB offset (0x800 sectors)::
+
+   # mmc write 18000000 0x800 0x800
+
+- Restart the board and then SPL binary will launch the kernel directly.
diff --git a/doc/board/freescale/mx6sabresd.rst b/doc/board/freescale/mx6sabresd.rst
new file mode 100644
index 0000000..fe15ba7
--- /dev/null
+++ b/doc/board/freescale/mx6sabresd.rst
@@ -0,0 +1,132 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+mx6sabresd
+==========
+
+How to use and build U-Boot on mx6sabresd
+-----------------------------------------
+
+The following methods can be used for booting mx6sabresd boards:
+
+1. Booting from SD card
+
+2. Booting from eMMC
+
+3. Booting via Falcon mode (SPL launches the kernel directly)
+
+
+1. Booting from SD card via SPL
+-------------------------------
+
+mx6sabresd_defconfig target supports mx6q/mx6dl/mx6qp sabresd variants.
+
+In order to build it:
+
+.. code-block:: bash
+
+   $ make mx6sabresd_defconfig
+   $ make
+
+This will generate the SPL and u-boot-dtb.img binaries.
+
+- Flash the SPL binary into the SD card:
+
+.. code-block:: bash
+
+   $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 conv=notrunc && sync
+
+- Flash the u-boot-dtb.img binary into the SD card:
+
+.. code-block:: bash
+
+   $ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 conv=notrunc && sync
+
+2. Booting from eMMC
+--------------------
+
+.. code-block:: bash
+
+   $ make mx6sabresd_defconfig
+   $ make
+
+This will generate the SPL and u-boot-dtb.img binaries.
+
+- Boot first from SD card as shown in the previous section
+
+In U-boot change the eMMC partition config::
+
+   => mmc partconf 2 1 0 0
+
+Mount the eMMC in the host PC::
+
+   => ums 0 mmc 2
+
+- Flash SPL and u-boot-dtb.img binaries into the eMMC:
+
+.. code-block:: bash
+
+   $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 conv=notrunc && sync
+   $ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 conv=notrunc && sync
+
+Set SW6 to eMMC 8-bit boot: 11010110
+
+3. Booting via Falcon mode
+--------------------------
+
+.. code-block:: bash
+
+  $ make mx6sabresd_defconfig
+  $ make
+
+This will generate the SPL image called SPL and the u-boot-dtb.img.
+
+- Flash the SPL image into the SD card
+
+.. code-block:: bash
+
+   $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none conv=notrunc && sync
+
+- Flash the u-boot-dtb.img image into the SD card
+
+.. code-block:: bash
+
+   $ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none conv=notrunc && sync
+
+Create a partition for root file system and extract it there
+
+.. code-block:: bash
+
+   $ sudo tar xvf rootfs.tar.gz -C /media/root
+
+The SD card must have enough space for raw "args" and "kernel".
+To configure Falcon mode for the first time, on U-Boot do the following commands:
+
+- Setup the IP server::
+
+   # setenv serverip <server_ip_address>
+
+- Download dtb file::
+
+   # dhcp ${fdt_addr} imx6q-sabresd.dtb
+
+- Download kernel image::
+
+   # dhcp ${loadaddr} uImage
+
+- Write kernel at 2MB offset::
+
+   # mmc write ${loadaddr} 0x1000 0x4000
+
+- Setup kernel bootargs::
+
+   # setenv bootargs "console=ttymxc0,115200 root=/dev/mmcblk1p1 rootfstype=ext4 rootwait quiet rw"
+
+- Prepare args::
+
+   # spl export fdt ${loadaddr} - ${fdt_addr}
+
+- Write args 1MB data (0x800 sectors) to 1MB offset (0x800 sectors)::
+
+   # mmc write 18000000 0x800 0x800
+
+- Press KEY_VOL_UP key, power up the board and then SPL binary will launch the kernel directly.
diff --git a/board/freescale/mx6ul_14x14_evk/README b/doc/board/freescale/mx6ul_14x14_evk.rst
index e101abe..8298bf8 100644
--- a/board/freescale/mx6ul_14x14_evk/README
+++ b/doc/board/freescale/mx6ul_14x14_evk.rst
@@ -1,11 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+mx6ul_14x14_evk
+===============
+
 How to use U-Boot on Freescale MX6UL 14x14 EVK
 -----------------------------------------------
 
 - Build U-Boot for MX6UL 14x14 EVK:
 
-$ make mrproper
-$ make mx6ul_14x14_evk_defconfig
-$ make
+.. code-block:: bash
+
+   $ make mrproper
+   $ make mx6ul_14x14_evk_defconfig
+   $ make
 
 This will generate the SPL image called SPL and the u-boot.img.
 
@@ -14,35 +21,38 @@ This will generate the SPL image called SPL and the u-boot.img.
 
 - Flash the SPL image into the micro SD card:
 
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+.. code-block:: bash
+
+   sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1 conv=notrunc; sync
 
 - Flash the u-boot.img image into the micro SD card:
 
-sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
+.. code-block:: bash
 
-- Jumper settings:
+   sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69 conv=notrunc; sync
 
-SW601: 0 0 1 0
-Sw602: 1 0
+- Jumper settings::
+
+   SW601: 0 0 1 0
+   Sw602: 1 0
 
 where 0 means bottom position and 1 means top position (from the
 switch label numbers reference).
 
 - Connect the USB cable between the EVK and the PC for the console.
-(The USB console connector is the one close the push buttons)
+  The USB console connector is the one close the push buttons
 
-- Insert the micro SD card in the board, power it up and U-Boot messages should
-come up.
+- Insert the micro SD card in the board, power it up and U-Boot messages should come up.
 
 2. Booting via Serial Download Protocol (SDP)
 ---------------------------------------------
 
 The mx6ulevk board can boot from USB OTG port using the SDP, target will
 enter in SDP mode in case an SD Card is not connect or boot switches are
-set as below:
+set as below::
 
-Sw602: 0 1
-SW601: x x x x
+   Sw602: 0 1
+   SW601: x x x x
 
 The following tools can be used to boot via SDP, for both tools you must
 connect an USB cable in USB OTG port.
@@ -54,13 +64,15 @@ https://github.com/NXPmicro/mfgtools
 
 The following script should be created to boot SPL + u-boot-dtb.img binaries:
 
-  $ cat uuu_script
-    uuu_version 1.1.4
+.. code-block:: bash
+
+   $ cat uuu_script
+     uuu_version 1.1.4
 
-    SDP: boot -f SPL
-    SDPU: write -f u-boot-dtb.img -addr 0x877fffc0
-    SDPU: jump -addr 0x877fffc0
-    SDPU: done
+     SDP: boot -f SPL
+     SDPU: write -f u-boot-dtb.img -addr 0x877fffc0
+     SDPU: jump -addr 0x877fffc0
+     SDPU: done
 
 Please note that the address above is calculated based on SYS_TEXT_BASE address:
 
@@ -68,7 +80,9 @@ Please note that the address above is calculated based on SYS_TEXT_BASE address:
 
 Power on the target and run the following command from U-Boot root directory:
 
-  $ sudo ./uuu uuu_script
+.. code-block:: bash
+
+   $ sudo ./uuu uuu_script
 
 - Method 2: imx usb loader tool (imx_usb):
 
@@ -78,5 +92,7 @@ https://github.com/boundarydevices/imx_usb_loader
 Build the source code and run the following commands from U-Boot root
 directory:
 
-  $ sudo ./imx_usb SPL
-  $ sudo ./imx_usb u-boot-dtb.img
+.. code-block:: bash
+
+   $ sudo ./imx_usb SPL
+   $ sudo ./imx_usb u-boot-dtb.img
diff --git a/board/freescale/mx6ullevk/README b/doc/board/freescale/mx6ullevk.rst
index d5c8770..a26248a 100644
--- a/board/freescale/mx6ullevk/README
+++ b/doc/board/freescale/mx6ullevk.rst
@@ -1,26 +1,37 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+mx6ullevk
+=========
+
 How to use U-Boot on Freescale MX6ULL 14x14 EVK
-----------------------------------------------
+-----------------------------------------------
 
 - First make sure you have installed the dtc package (device tree compiler):
 
-$ sudo apt-get install device-tree-compiler
+.. code-block:: bash
+
+   $ sudo apt-get install device-tree-compiler
 
 - Build U-Boot for MX6ULL 14x14 EVK:
 
-$ make mrproper
-$ make mx6ull_14x14_evk_defconfig
-$ make
+.. code-block:: bash
+
+   $ make mrproper
+   $ make mx6ull_14x14_evk_defconfig
+   $ make
 
 This generates the u-boot-dtb.imx image in the current directory.
 
 - Flash the u-boot-dtb.imx image into the micro SD card:
 
-$ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 && sync
+.. code-block:: bash
+
+   $ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 conv=notrunc && sync
 
-- Jumper settings:
+- Jumper settings::
 
-SW601: 0 0 1 0
-Sw602: 1 0
+   SW601: 0 0 1 0
+   Sw602: 1 0
 
 Where 0 means bottom position and 1 means top position (from the switch label
 numbers reference).
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
index c8e6fa7..b5ccea0 100644
--- a/drivers/bootcount/Kconfig
+++ b/drivers/bootcount/Kconfig
@@ -108,6 +108,16 @@ config DM_BOOTCOUNT_I2C_EEPROM
 	  pointing to the underlying i2c eeprom device) and an optional 'offset'
 	  property are supported.
 
+config DM_BOOTCOUNT_SPI_FLASH
+	bool "Support SPI flash devices as a backing store for bootcount"
+	depends on DM_SPI_FLASH
+	help
+	  Enabled reading/writing the bootcount in a DM SPI flash device.
+	  The wrapper device is to be specified with the compatible string
+	  'u-boot,bootcount-spi-flash' and the 'spi-flash'-property (a phandle
+	  pointing to the underlying SPI flash device) and an optional 'offset'
+	  property are supported.
+
 config BOOTCOUNT_MEM
 	bool "Support memory based bootcounter"
 	help
diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile
index 059d40d..51d860b 100644
--- a/drivers/bootcount/Makefile
+++ b/drivers/bootcount/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_BOOTCOUNT_EXT)	+= bootcount_ext.o
 obj-$(CONFIG_DM_BOOTCOUNT)      += bootcount-uclass.o
 obj-$(CONFIG_DM_BOOTCOUNT_RTC)  += rtc.o
 obj-$(CONFIG_DM_BOOTCOUNT_I2C_EEPROM)	+= i2c-eeprom.o
+obj-$(CONFIG_DM_BOOTCOUNT_SPI_FLASH)	+= spi-flash.o
diff --git a/drivers/bootcount/spi-flash.c b/drivers/bootcount/spi-flash.c
new file mode 100644
index 0000000..7cd388e
--- /dev/null
+++ b/drivers/bootcount/spi-flash.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Collabora
+ * (C) Copyright 2019 GE
+ */
+
+#include <common.h>
+#include <bootcount.h>
+#include <dm.h>
+#include <spi_flash.h>
+
+static const u8 bootcount_magic = 0xbc;
+
+struct bootcount_spi_flash_priv {
+	struct udevice *spi_flash;
+	u32 offset;
+};
+
+static int bootcount_spi_flash_update(struct udevice *dev, u32 offset, u32 len, const void *buf)
+{
+	struct spi_flash *flash = dev_get_uclass_priv(dev);
+	u32 sector_size = flash->sector_size;
+	u32 sector_offset = offset % sector_size;
+	u32 sector = offset - sector_offset;
+	int err = 0;
+
+	/* code only supports updating a single sector */
+	if (sector_offset + len > sector_size)
+		return -ENOSYS;
+
+	u8 *buffer = malloc(sector_size);
+	if (!buffer)
+		return -ENOMEM;
+
+	err = spi_flash_read_dm(dev, sector, sector_size, buffer);
+	if (err < 0)
+		goto out;
+
+	memcpy(buffer + sector_offset, buf, len);
+
+	err = spi_flash_erase_dm(dev, sector, sector_size);
+	if (err < 0)
+		goto out;
+
+	err = spi_flash_write_dm(dev, sector, sector_size, buffer);
+	if (err < 0)
+		goto out;
+
+out:
+	free(buffer);
+	return err;
+}
+
+static int bootcount_spi_flash_set(struct udevice *dev, const u32 a)
+{
+	struct bootcount_spi_flash_priv *priv = dev_get_priv(dev);
+	const u16 val = bootcount_magic << 8 | (a & 0xff);
+
+	if (bootcount_spi_flash_update(priv->spi_flash, priv->offset, 2, &val) < 0) {
+		debug("%s: write failed\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int bootcount_spi_flash_get(struct udevice *dev, u32 *a)
+{
+	struct bootcount_spi_flash_priv *priv = dev_get_priv(dev);
+	u16 val;
+
+	if (spi_flash_read_dm(priv->spi_flash, priv->offset, 2, &val) < 0) {
+		debug("%s: read failed\n", __func__);
+		return -EIO;
+	}
+
+	if (val >> 8 == bootcount_magic) {
+		*a = val & 0xff;
+		return 0;
+	}
+
+	debug("%s: bootcount magic does not match on %04x\n", __func__, val);
+	return -EIO;
+}
+
+static int bootcount_spi_flash_probe(struct udevice *dev)
+{
+	struct ofnode_phandle_args phandle_args;
+	struct bootcount_spi_flash_priv *priv = dev_get_priv(dev);
+	struct udevice *spi_flash;
+
+	if (dev_read_phandle_with_args(dev, "spi-flash", NULL, 0, 0, &phandle_args)) {
+		debug("%s: spi-flash backing device not specified\n", dev->name);
+		return -ENOENT;
+	}
+
+	if (uclass_get_device_by_ofnode(UCLASS_SPI_FLASH, phandle_args.node, &spi_flash)) {
+		debug("%s: could not get backing device\n", dev->name);
+		return -ENODEV;
+	}
+
+	priv->spi_flash = spi_flash;
+	priv->offset = dev_read_u32_default(dev, "offset", 0);
+
+	return 0;
+}
+
+static const struct bootcount_ops bootcount_spi_flash_ops = {
+	.get = bootcount_spi_flash_get,
+	.set = bootcount_spi_flash_set,
+};
+
+static const struct udevice_id bootcount_spi_flash_ids[] = {
+	{ .compatible = "u-boot,bootcount-spi-flash" },
+	{ }
+};
+
+U_BOOT_DRIVER(bootcount_spi_flash) = {
+	.name	= "bootcount-spi-flash",
+	.id	= UCLASS_BOOTCOUNT,
+	.priv_auto_alloc_size = sizeof(struct bootcount_spi_flash_priv),
+	.probe	= bootcount_spi_flash_probe,
+	.of_match = bootcount_spi_flash_ids,
+	.ops	= &bootcount_spi_flash_ops,
+};
diff --git a/drivers/rtc/m41t62.c b/drivers/rtc/m41t62.c
index 94a6b52..0a4e12d 100644
--- a/drivers/rtc/m41t62.c
+++ b/drivers/rtc/m41t62.c
@@ -22,6 +22,8 @@
 #include <log.h>
 #include <rtc.h>
 #include <i2c.h>
+#include <linux/log2.h>
+#include <linux/delay.h>
 
 #define M41T62_REG_SSEC	0
 #define M41T62_REG_SEC	1
@@ -47,8 +49,14 @@
 #define M41T62_ALMON_SQWE	(1 << 6)	/* SQWE: SQW Enable Bit */
 #define M41T62_ALHOUR_HT	(1 << 6)	/* HT: Halt Update Bit */
 #define M41T62_FLAGS_AF		(1 << 6)	/* AF: Alarm Flag Bit */
+#define M41T62_FLAGS_OF		(1 << 2)	/* OF: Oscillator Flag Bit */
 #define M41T62_FLAGS_BATT_LOW	(1 << 4)	/* BL: Battery Low Bit */
 
+#define M41T62_WDAY_SQW_FREQ_MASK	0xf0
+#define M41T62_WDAY_SQW_FREQ_SHIFT	4
+
+#define M41T62_SQW_MAX_FREQ	32768
+
 #define M41T62_FEATURE_HT	(1 << 0)
 #define M41T62_FEATURE_BL	(1 << 1)
 
@@ -139,21 +147,140 @@ static int m41t62_rtc_set(struct udevice *dev, const struct rtc_time *tm)
 	return 0;
 }
 
-static int m41t62_rtc_reset(struct udevice *dev)
+static int m41t62_sqw_enable(struct udevice *dev, bool enable)
 {
 	u8 val;
+	int ret;
+
+	ret = dm_i2c_read(dev, M41T62_REG_ALARM_MON, &val, sizeof(val));
+	if (ret)
+		return ret;
+
+	if (enable)
+		val |= M41T62_ALMON_SQWE;
+	else
+		val &= ~M41T62_ALMON_SQWE;
+
+	return dm_i2c_write(dev, M41T62_REG_ALARM_MON, &val, sizeof(val));
+}
+
+static int m41t62_sqw_set_rate(struct udevice *dev, unsigned int rate)
+{
+	u8 val, newval, sqwrateval;
+	int ret;
+
+	if (rate >= M41T62_SQW_MAX_FREQ)
+		sqwrateval = 1;
+	else if (rate >= M41T62_SQW_MAX_FREQ / 4)
+		sqwrateval = 2;
+	else if (rate)
+		sqwrateval = 15 - ilog2(rate);
+
+	ret = dm_i2c_read(dev, M41T62_REG_WDAY, &val, sizeof(val));
+	if (ret)
+		return ret;
+
+	newval = val;
+	newval &= ~M41T62_WDAY_SQW_FREQ_MASK;
+	newval |= (sqwrateval << M41T62_WDAY_SQW_FREQ_SHIFT);
+
+	/*
+	 * Try to avoid writing unchanged values. Writing to this register
+	 * will reset the internal counter pipeline and thus affect system
+	 * time.
+	 */
+	if (newval == val)
+		return 0;
+
+	return dm_i2c_write(dev, M41T62_REG_WDAY, &newval, sizeof(newval));
+}
+
+static int m41t62_rtc_restart_osc(struct udevice *dev)
+{
+	u8 val;
+	int ret;
+
+	/* 0. check if oscillator failure happened */
+	ret = dm_i2c_read(dev, M41T62_REG_FLAGS, &val, sizeof(val));
+	if (ret)
+		return ret;
+	if (!(val & M41T62_FLAGS_OF))
+		return 0;
+
+	ret = dm_i2c_read(dev, M41T62_REG_SEC, &val, sizeof(val));
+	if (ret)
+		return ret;
+
+	/* 1. Set stop bit */
+	val |= M41T62_SEC_ST;
+	ret = dm_i2c_write(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
+	if (ret)
+		return ret;
+
+	/* 2. Clear stop bit */
+	val &= ~M41T62_SEC_ST;
+	ret = dm_i2c_write(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
+	if (ret)
+		return ret;
+
+	/* 3. wait 4 seconds */
+	mdelay(4000);
+
+	ret = dm_i2c_read(dev, M41T62_REG_FLAGS, &val, sizeof(val));
+	if (ret)
+		return ret;
+
+	/* 4. clear M41T62_FLAGS_OF bit */
+	val &= ~M41T62_FLAGS_OF;
+	ret = dm_i2c_write(dev, M41T62_REG_FLAGS, &val, sizeof(val));
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int m41t62_rtc_clear_ht(struct udevice *dev)
+{
+	u8 val;
+	int ret;
 
 	/*
 	 * M41T82: Make sure HT (Halt Update) bit is cleared.
 	 * This bit is 0 in M41T62 so its save to clear it always.
 	 */
 
-	int ret = dm_i2c_read(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
-
+	ret = dm_i2c_read(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
+	if (ret)
+		return ret;
 	val &= ~M41T80_ALHOUR_HT;
-	ret |= dm_i2c_write(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
+	ret = dm_i2c_write(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int m41t62_rtc_reset(struct udevice *dev)
+{
+	int ret;
+
+	ret = m41t62_rtc_restart_osc(dev);
+	if (ret)
+		return ret;
+
+	ret = m41t62_rtc_clear_ht(dev);
+	if (ret)
+		return ret;
 
-	return ret;
+	/*
+	 * Some boards feed the square wave as clock input into
+	 * the SoC. This enables a 32.768kHz square wave, which is
+	 * also the hardware default after power-loss.
+	 */
+	ret = m41t62_sqw_set_rate(dev, 32768);
+	if (ret)
+		return ret;
+	return m41t62_sqw_enable(dev, true);
 }
 
 /*
@@ -162,7 +289,7 @@ static int m41t62_rtc_reset(struct udevice *dev)
  */
 static int m41t62_rtc_probe(struct udevice *dev)
 {
-	return m41t62_rtc_reset(dev);
+	return m41t62_rtc_clear_ht(dev);
 }
 
 static const struct rtc_ops m41t62_rtc_ops = {
diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig
index 70692f0..0e5c7c9 100644
--- a/drivers/sysreset/Kconfig
+++ b/drivers/sysreset/Kconfig
@@ -43,6 +43,13 @@ config SYSRESET_CMD_POWEROFF
 
 endif
 
+config POWEROFF_GPIO
+	bool "Enable support for GPIO poweroff driver"
+	select DM_GPIO
+	help
+	  Support for system poweroff using a GPIO pin. This can be used
+	  for systems having a single GPIO to trigger a system poweroff.
+
 config SYSRESET_GPIO
 	bool "Enable support for GPIO reset driver"
 	select DM_GPIO
diff --git a/drivers/sysreset/Makefile b/drivers/sysreset/Makefile
index 920c692..de81c39 100644
--- a/drivers/sysreset/Makefile
+++ b/drivers/sysreset/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_ARCH_ASPEED) += sysreset_ast.o
 obj-$(CONFIG_ARCH_ROCKCHIP) += sysreset_rockchip.o
 obj-$(CONFIG_ARCH_STI) += sysreset_sti.o
 obj-$(CONFIG_SANDBOX) += sysreset_sandbox.o
+obj-$(CONFIG_POWEROFF_GPIO) += poweroff_gpio.o
 obj-$(CONFIG_SYSRESET_GPIO) += sysreset_gpio.o
 obj-$(CONFIG_SYSRESET_MPC83XX) += sysreset_mpc83xx.o
 obj-$(CONFIG_SYSRESET_MICROBLAZE) += sysreset_microblaze.o
diff --git a/drivers/sysreset/poweroff_gpio.c b/drivers/sysreset/poweroff_gpio.c
new file mode 100644
index 0000000..ac482c3
--- /dev/null
+++ b/drivers/sysreset/poweroff_gpio.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Toggles a GPIO pin to power down a device
+ *
+ * Created using the Linux driver as reference, which
+ * has been written by:
+ *
+ * Jamie Lentin <jm@lentin.co.uk>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Copyright (C) 2012 Jamie Lentin
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <log.h>
+#include <sysreset.h>
+
+#include <asm/gpio.h>
+#include <linux/delay.h>
+
+struct poweroff_gpio_info {
+	struct gpio_desc gpio;
+	u32 active_delay_ms;
+	u32 inactive_delay_ms;
+	u32 timeout_ms;
+};
+
+static int poweroff_gpio_request(struct udevice *dev, enum sysreset_t type)
+{
+	struct poweroff_gpio_info *priv = dev_get_priv(dev);
+	int r;
+
+	if (type != SYSRESET_POWER_OFF)
+		return -ENOSYS;
+
+	debug("GPIO poweroff\n");
+
+	/* drive it active, also inactive->active edge */
+	r = dm_gpio_set_value(&priv->gpio, 1);
+	if (r < 0)
+		return r;
+	mdelay(priv->active_delay_ms);
+
+	/* drive inactive, also active->inactive edge */
+	r = dm_gpio_set_value(&priv->gpio, 0);
+	if (r < 0)
+		return r;
+	mdelay(priv->inactive_delay_ms);
+
+	/* drive it active, also inactive->active edge */
+	r = dm_gpio_set_value(&priv->gpio, 1);
+	if (r < 0)
+		return r;
+
+	/* give it some time */
+	mdelay(priv->timeout_ms);
+
+	return -EINPROGRESS;
+}
+
+static int poweroff_gpio_probe(struct udevice *dev)
+{
+	struct poweroff_gpio_info *priv = dev_get_priv(dev);
+	int flags;
+
+	flags = dev_read_bool(dev, "input") ? GPIOD_IS_IN : GPIOD_IS_OUT;
+	priv->active_delay_ms = dev_read_u32_default(dev, "active-delay-ms", 100);
+	priv->inactive_delay_ms = dev_read_u32_default(dev, "inactive-delay-ms", 100);
+	priv->timeout_ms = dev_read_u32_default(dev, "timeout-ms", 3000);
+
+	return gpio_request_by_name(dev, "gpios", 0, &priv->gpio, flags);
+}
+
+static struct sysreset_ops poweroff_gpio_ops = {
+	.request = poweroff_gpio_request,
+};
+
+static const struct udevice_id poweroff_gpio_ids[] = {
+	{ .compatible = "gpio-poweroff", },
+	{},
+};
+
+U_BOOT_DRIVER(poweroff_gpio) = {
+	.name		= "poweroff-gpio",
+	.id		= UCLASS_SYSRESET,
+	.ops		= &poweroff_gpio_ops,
+	.probe		= poweroff_gpio_probe,
+	.priv_auto_alloc_size = sizeof(struct poweroff_gpio_info),
+	.of_match	= poweroff_gpio_ids,
+};
diff --git a/drivers/thermal/imx_tmu.c b/drivers/thermal/imx_tmu.c
index 4ca2208..936068c 100644
--- a/drivers/thermal/imx_tmu.c
+++ b/drivers/thermal/imx_tmu.c
@@ -14,6 +14,7 @@
 #include <dm/device.h>
 #include <errno.h>
 #include <fuse.h>
+#include <linux/delay.h>
 #include <malloc.h>
 #include <thermal.h>
 
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 210d9f8..4532a40 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -21,12 +21,6 @@ config WATCHDOG_TIMEOUT_MSECS
 config HW_WATCHDOG
 	bool
 
-config WATCHDOG_RESET_DISABLE
-	bool "Disable reset watchdog"
-	help
-	  Disable reset watchdog, which can let WATCHDOG_RESET invalid, so
-	  that the watchdog will not be fed in u-boot.
-
 config IMX_WATCHDOG
 	bool "Enable Watchdog Timer support for IMX and LSCH2 of NXP"
 	select HW_WATCHDOG if !WDT
@@ -34,6 +28,13 @@ config IMX_WATCHDOG
 	  Select this to enable the IMX and LSCH2 of Layerscape watchdog
 	  driver.
 
+config WATCHDOG_RESET_DISABLE
+	bool "Disable reset watchdog"
+	depends on IMX_WATCHDOG
+	help
+	  Disable reset watchdog, which can let WATCHDOG_RESET invalid, so
+	  that the watchdog will not be fed in u-boot.
+
 config OMAP_WATCHDOG
 	bool "TI OMAP watchdog driver"
 	depends on ARCH_OMAP2PLUS
diff --git a/include/configs/ge_b1x5v2.h b/include/configs/ge_b1x5v2.h
new file mode 100644
index 0000000..7db6afd
--- /dev/null
+++ b/include/configs/ge_b1x5v2.h
@@ -0,0 +1,127 @@
+/*
+ * GE B1x5v2
+ *
+ * Copyright 2018-2020 GE Inc.
+ * Copyright 2018-2020 Collabora Ltd.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __GE_B1X5V2_CONFIG_H
+#define __GE_B1X5V2_CONFIG_H
+
+#include "mx6_common.h"
+
+#include "imx6_spl.h"
+#define CONFIG_SPL_TARGET		"u-boot-with-spl.imx"
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
+
+/* PWM */
+#define CONFIG_IMX6_PWM_PER_CLK		66000000
+
+/* UART */
+#define CONFIG_MXC_UART_BASE		UART3_BASE
+
+#if CONFIG_MXC_UART_BASE == UART2_BASE
+/* UART2 requires CONFIG_DEBUG_UART_BASE=0x21e8000 */
+#define CONSOLE_DEVICE "ttymxc1" /* System on Module debug connector */
+#else
+/* UART3 requires CONFIG_DEBUG_UART_BASE=0x21ec000 */
+#define CONSOLE_DEVICE "ttymxc2" /* Base board debug connector */
+#endif
+
+/* USB */
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS		0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
+#define CONFIG_USBD_HS
+
+/* Video */
+#define CONFIG_HIDE_LOGO_VERSION
+#define CONFIG_IMX_VIDEO_SKIP
+
+/* Memory */
+#define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* Command definition */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"image=/boot/fitImage\0" \
+	"fdt_addr_r=0x18000000\0" \
+	"splash_addr_r=0x20000000\0" \
+	"mmcdev=2\0" \
+	"mmcpart=1\0" \
+	"console=console="CONSOLE_DEVICE",115200\0" \
+	"quiet=quiet loglevel=0\0" \
+	"rootdev=/dev/mmcblk1p\0" \
+	"setargs=setenv bootargs ${console} ${quiet} ${fsckforcerepair} " \
+		"bootcause=${bootcause} vt.global_cursor_default=0 vt.cur_default=1 " \
+		"root=${rootdev}${mmcpart} video=HDMI-A-1:${resolution} rootwait ro\0" \
+	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"showsplashscreen=load mmc ${mmcdev}:${mmcpart} ${splash_addr_r} /boot/splashscreen-${resolution}.bmp; " \
+		"bmp display ${splash_addr_r};\0" \
+	"setconfidx=" \
+		"if test \"${devicetype}\" = \"B105v2\"; then " \
+			"setenv confidx 1; " \
+		"elif test \"${devicetype}\" = \"B125v2\"; then " \
+			"setenv confidx 2; " \
+		"elif test \"${devicetype}\" = \"B155v2\"; then " \
+			"setenv confidx 3; " \
+		"elif test \"${devicetype}\" = \"B105Pv2\"; then " \
+			"setenv confidx 4; " \
+		"elif test \"${devicetype}\" = \"B125Pv2\"; then " \
+			"setenv confidx 5; " \
+		"fi;\0" \
+	"set_default_type=setenv devicetype B155v2; setenv resolution 1366x768;" \
+		"setenv fdtfile imx6dl-b155v2.dtb; run setconfidx;\0" \
+	"checkconfidx=env exists confidx || run set_default_type;\0" \
+	"checkfsckforcerepair=" \
+		"if test \"${bootcount}\" > \"3\" ; then " \
+			"setenv fsckforcerepair fsck.repair=1; " \
+		"fi;\0" \
+	"helix=run setconfidx; run checkconfidx; run checkfsckforcerepair; run setargs; " \
+		"regulator dev LED_VCC; regulator enable; " \
+		"regulator dev 5V0_AUDIO; regulator enable; " \
+		"bootm ${loadaddr}#conf@${confidx};\0" \
+	"failbootcmd=" \
+		"echo reached failbootcmd;" \
+		"cls; setcurs 5 4; " \
+		"lcdputs \"Monitor failed to start. Try again, or contact GE Service for support.\"; " \
+		"bootcount reset; \0" \
+	"hasfirstboot=" \
+		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+		"/boot/bootcause/firstboot;\0" \
+	"swappartitions=" \
+		"setexpr mmcpart 3 - ${mmcpart};\0" \
+	"doboot=" \
+		"echo Booting from mmc:${mmcdev}:${mmcpart} ...; " \
+		"run helix;\0" \
+	"altbootcmd=" \
+		"setenv mmcpart 1; run hasfirstboot || setenv mmcpart 2; " \
+		"run hasfirstboot || setenv mmcpart 0; " \
+		"if test ${mmcpart} != 0; then " \
+			"setenv bootcause REVERT; " \
+			"run swappartitions loadimage doboot; " \
+		"fi; " \
+		"run failbootcmd\0" \
+	"tryboot=" \
+		"setenv mmcpart 1; run hasfirstboot || setenv mmcpart 2; " \
+		"run loadimage || run swappartitions && run loadimage || " \
+		"setenv mmcpart 0 && echo MISSING IMAGE;" \
+		"run showsplashscreen; sleep 1; " \
+		"run doboot; run failbootcmd;\0" \
+
+#define CONFIG_BOOTCOMMAND "run tryboot;"
+
+#endif /* __GE_B1X5V2_CONFIG_H */
diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h
new file mode 100644
index 0000000..fd69dc4
--- /dev/null
+++ b/include/configs/phycore_imx8mm.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Copyright (C) 2019-2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#ifndef __PHYCORE_IMX8MM_H
+#define __PHYCORE_IMX8MM_H
+
+#include <linux/sizes.h>
+#include <linux/stringify.h>
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_SYS_BOOTM_LEN		SZ_64M
+#define CONFIG_SPL_MAX_SIZE		(148 * SZ_1K)
+#define CONFIG_SYS_MONITOR_LEN		SZ_512K
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
+#define CONFIG_SYS_UBOOT_BASE \
+		(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_STACK		0x920000
+#define CONFIG_SPL_BSS_START_ADDR	0x910000
+#define CONFIG_SPL_BSS_MAX_SIZE		SZ_8K
+#define CONFIG_SYS_SPL_MALLOC_START	0x42200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K
+
+/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
+#define CONFIG_MALLOC_F_ADDR		0x930000
+/* For RAW image gives a error info not panic */
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"image=Image\0" \
+	"console=ttymxc2,115200\0" \
+	"fdt_addr=0x48000000\0" \
+	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"ipaddr=192.168.3.11\0" \
+	"serverip=192.168.3.10\0" \
+	"netmask=255.225.255.0\0" \
+	"ip_dyn=no\0" \
+	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"mmcroot=2\0" \
+	"mmcautodetect=yes\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if run loadfdt; then " \
+			"booti ${loadaddr} - ${fdt_addr}; " \
+		"else " \
+			"echo WARN: Cannot load the DT; " \
+		"fi;\0 " \
+	"nfsroot=/nfs\0" \
+	"netargs=setenv bootargs console=${console} root=/dev/nfs ip=dhcp " \
+		"nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+	"netboot=echo Booting from net ...; " \
+		"run netargs; " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${loadaddr} ${image}; " \
+		"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+			"booti ${loadaddr} - ${fdt_addr}; " \
+		"else " \
+			"echo WARN: Cannot load the DT; " \
+		"fi;\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
+		"if run loadimage; then " \
+			"run mmcboot; " \
+		"else run netboot; " \
+		"fi; " \
+	"fi;"
+
+/* Link Definitions */
+#define CONFIG_LOADADDR			0x40480000
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE	SZ_512K
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_MMCROOT			"/dev/mmcblk2p2"  /* USDHC3 */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		SZ_32M
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+
+#define PHYS_SDRAM			SZ_1G
+#define PHYS_SDRAM_SIZE                 SZ_2G /* 2GB DDR */
+
+/* UART */
+#define CONFIG_MXC_UART_BASE		UART3_BASE_ADDR
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_CBSIZE		SZ_2K
+#define CONFIG_SYS_MAXARGS		64
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+/* USDHC */
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+#define CONFIG_SYS_FSL_ESDHC_ADDR       0
+#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
+
+/* I2C */
+#define CONFIG_SYS_I2C_SPEED		100000
+
+/* ENET1 */
+#define CONFIG_ETHPRIME			"FEC"
+#define CONFIG_FEC_XCV_TYPE		RGMII
+#define CONFIG_FEC_MXC_PHYADDR		0
+#define FEC_QUIRK_ENET_MAC
+#define IMX_FEC_BASE			0x30BE0000
+
+#endif /* __PHYCORE_IMX8MM_H */