diff options
| author | Tom Rini <trini@konsulko.com> | 2022-02-09 07:51:44 -0500 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2022-02-09 07:51:44 -0500 |
| commit | 5cabf141f0f9d1bae5011dd582d859e631afee8b (patch) | |
| tree | 42806797372a8910c75a36c0225348068e9db353 | |
| parent | 531c00894577a0a852431adf61ade76925f8b162 (diff) | |
| parent | 2e253adf94b58c323bf6ed43bced02e48dada2dd (diff) | |
| download | u-boot-WIP/09Feb2022.zip u-boot-WIP/09Feb2022.tar.gz u-boot-WIP/09Feb2022.tar.bz2 | |
Merge branch '2022-02-08-Kconfig-updates'WIP/09Feb2022
- Assorted general code cleanups to make sure we use the right macros
and use them correctly and buildman updates around kconfig.h itself.
- Convert some IDE and SCSI symbols to Kconfig.
- Convert CONFIG_REMAKE_ELF
- Introduce conversion deadline for DM_SCSI.
527 files changed, 1604 insertions, 1962 deletions
@@ -353,6 +353,13 @@ config SPL_IMAGE used to generate a combined image with SPL and main U-Boot proper as one single image. +config REMAKE_ELF + bool "Recreate an ELF image from raw U-Boot binary" + help + Enable this to recreate an ELF image (u-boot.elf) from the raw + U-Boot binary (u-boot.bin), which may already have been statically + relocated and may already have a device-tree appended to it. + config BUILD_TARGET string "Build target special images" default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_ARRIA10 @@ -1134,6 +1134,7 @@ endif @# is enable to tell 'deprecated' that one of these symbols exists $(call deprecated,CONFIG_TIMER,Timer drivers,v2023.01,$(if $(strip $(CONFIG_SYS_TIMER_RATE)$(CONFIG_SYS_TIMER_COUNTER)),x)) $(call deprecated,CONFIG_DM_SERIAL,Serial drivers,v2023.04,$(CONFIG_SERIAL)) + $(call deprecated,CONFIG_DM_SCSI,SCSI drivers,v2023.04,$(CONFIG_SCSI)) @# Check that this build does not use CONFIG options that we do not @# know about unless they are in Kconfig. All the existing CONFIG @# options are whitelisted, so new ones should not be added. @@ -720,17 +720,6 @@ The following options need to be configured: CONFIG_SCSI) you must configure support for at least one non-MTD partition type as well. -- IDE Reset method: - CONFIG_IDE_RESET - is this is defined, IDE Reset will - be performed by calling the function - ide_set_reset(int reset) - which has to be defined in a board specific file - -- ATAPI Support: - CONFIG_ATAPI - - Set this to enable ATAPI support. - - LBA48 Support CONFIG_LBA48 @@ -743,16 +732,6 @@ The following options need to be configured: When enabled, makes the IDE subsystem use 64bit sector addresses. Default is 32bit. -- SCSI Support: - CONFIG_SYS_SCSI_MAX_LUN [8], CONFIG_SYS_SCSI_MAX_SCSI_ID [7] and - CONFIG_SYS_SCSI_MAX_DEVICE [CONFIG_SYS_SCSI_MAX_SCSI_ID * - CONFIG_SYS_SCSI_MAX_LUN] can be adjusted to define the - maximum numbers of LUNs, SCSI ID's and target - devices. - - The environment variable 'scsidevs' is set to the number of - SCSI devices found during the last scan. - - NETWORK Support (PCI): CONFIG_E1000_SPI Utility code for direct access to the SPI bus on Intel 8257x. @@ -2393,14 +2372,6 @@ Low Level (hardware related) configuration options: If this macro is defined, then CONFIG_SYS_CCSRBAR_PHYS will be forced to a value that ensures that CCSR is not relocated. -- CONFIG_IDE_AHB: - Most IDE controllers were designed to be connected with PCI - interface. Only few of them were designed for AHB interface. - When software is doing ATA command and data transfer to - IDE devices through IDE-AHB controller, some additional - registers accessing to these kind of IDE-AHB controller - is required. - - CONFIG_SYS_IMMR: Physical address of the Internal Memory. DO NOT CHANGE unless you know exactly what you're doing! (11-4) [MPC8xx systems only] diff --git a/api/api_storage.c b/api/api_storage.c index a0dacad..adca44b 100644 --- a/api/api_storage.c +++ b/api/api_storage.c @@ -9,6 +9,7 @@ #include <common.h> #include <api_public.h> #include <part.h> +#include <scsi.h> #if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE) #include <usb.h> @@ -71,7 +72,7 @@ void dev_stor_init(void) specs[ENUM_SATA].name = "sata"; #endif #if defined(CONFIG_SCSI) - specs[ENUM_SCSI].max_dev = CONFIG_SYS_SCSI_MAX_DEVICE; + specs[ENUM_SCSI].max_dev = SCSI_MAX_DEVICE; specs[ENUM_SCSI].enum_started = 0; specs[ENUM_SCSI].enum_ended = 0; specs[ENUM_SCSI].type = DEV_TYP_STOR | DT_STOR_SCSI; diff --git a/arch/Kconfig b/arch/Kconfig index bea8ead..e619144 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -172,7 +172,6 @@ config SANDBOX imply FIRMWARE imply HASH_VERIFY imply LZMA - imply SCSI imply TEE imply AVB_VERIFY imply LIBAVB diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index 0e1f9e0..86a4e1f 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -78,11 +78,6 @@ /* SATA */ #define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000) -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) #ifdef CONFIG_DDR_SPD #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 07954bc..77e7270 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -91,7 +91,7 @@ $(PLUGIN).bin: endif quiet_cmd_cpp_cfg = CFGS $@ - cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $< + cmd_cpp_cfg = $(CPP) $(cpp_flags) -D__ASSEMBLY__ -x c -o $@ $< # mkimage source config file IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%) diff --git a/arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg b/arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg index 1a2e43e..e06d53e 100644 --- a/arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg +++ b/arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg @@ -3,7 +3,6 @@ * Copyright 2019 NXP */ -#define __ASSEMBLY__ FIT BOOT_FROM sd diff --git a/arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg b/arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg index 1405c65..120631a 100644 --- a/arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg +++ b/arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg @@ -3,7 +3,6 @@ * Copyright 2019 NXP */ -#define __ASSEMBLY__ FIT ROM_VERSION v2 diff --git a/arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg b/arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg index 4c63b31..7dae3fa 100644 --- a/arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg +++ b/arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg @@ -3,7 +3,6 @@ * Copyright 2019 NXP */ -#define __ASSEMBLY__ FIT ROM_VERSION v2 diff --git a/arch/arm/mach-imx/imx8m/imximage-8mp-lpddr4.cfg b/arch/arm/mach-imx/imx8m/imximage-8mp-lpddr4.cfg index 586a5ff..0fba9f5 100644 --- a/arch/arm/mach-imx/imx8m/imximage-8mp-lpddr4.cfg +++ b/arch/arm/mach-imx/imx8m/imximage-8mp-lpddr4.cfg @@ -3,7 +3,6 @@ * Copyright 2019 NXP */ -#define __ASSEMBLY__ FIT ROM_VERSION v2 diff --git a/arch/arm/mach-imx/imx8m/imximage.cfg b/arch/arm/mach-imx/imx8m/imximage.cfg index 2a3f959..30490e0 100644 --- a/arch/arm/mach-imx/imx8m/imximage.cfg +++ b/arch/arm/mach-imx/imx8m/imximage.cfg @@ -3,7 +3,6 @@ * Copyright 2018-2021 NXP */ -#define __ASSEMBLY__ FIT BOOT_FROM sd diff --git a/arch/arm/mach-imx/spl_qspi.cfg b/arch/arm/mach-imx/spl_qspi.cfg index 1e39ae2..6df779b 100644 --- a/arch/arm/mach-imx/spl_qspi.cfg +++ b/arch/arm/mach-imx/spl_qspi.cfg @@ -3,7 +3,6 @@ * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ */ -#define __ASSEMBLY__ #include <config.h> IMAGE_VERSION 2 diff --git a/arch/arm/mach-imx/spl_sd.cfg b/arch/arm/mach-imx/spl_sd.cfg index dbaee81..e739b54 100644 --- a/arch/arm/mach-imx/spl_sd.cfg +++ b/arch/arm/mach-imx/spl_sd.cfg @@ -3,7 +3,6 @@ * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ */ -#define __ASSEMBLY__ #include <config.h> IMAGE_VERSION 2 diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h index eb95023..b9f836b 100644 --- a/arch/arm/mach-kirkwood/include/mach/config.h +++ b/arch/arm/mach-kirkwood/include/mach/config.h @@ -59,18 +59,11 @@ #ifdef CONFIG_IDE #define __io /* Data, registers and alternate blocks are at the same offset */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0100) -#define CONFIG_SYS_ATA_REG_OFFSET (0x0100) -#define CONFIG_SYS_ATA_ALT_OFFSET (0x0100) /* Each 8-bit ATA register is aligned to a 4-bytes address */ -#define CONFIG_SYS_ATA_STRIDE 4 /* Controller supports 48-bits LBA addressing */ #define CONFIG_LBA48 /* CONFIG_IDE requires some #defines for ATA registers */ -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* ATA registers base is at SATA controller base */ -#define CONFIG_SYS_ATA_BASE_ADDR MV_SATA_BASE #endif /* CONFIG_IDE */ /* Use common timer */ diff --git a/arch/mips/lib/cache.c b/arch/mips/lib/cache.c index 51a8f43..ec652f0 100644 --- a/arch/mips/lib/cache.c +++ b/arch/mips/lib/cache.c @@ -38,7 +38,7 @@ static void probe_l2(void) l2c = read_c0_config5() & MIPS_CONF5_L2C; } - if (l2c && config_enabled(CONFIG_MIPS_CM)) { + if (l2c && IS_ENABLED(CONFIG_MIPS_CM)) { gd->arch.l2_line_size = mips_cm_l2_line_size(); } else if (l2c) { /* We don't know how to retrieve L2 config on this system */ diff --git a/board/advantech/imx8qm_rom7720_a1/imximage.cfg b/board/advantech/imx8qm_rom7720_a1/imximage.cfg index e324c7c..5ecde0c 100644 --- a/board/advantech/imx8qm_rom7720_a1/imximage.cfg +++ b/board/advantech/imx8qm_rom7720_a1/imximage.cfg @@ -3,7 +3,6 @@ * Copyright 2018 NXP */ -#define __ASSEMBLY__ /* Boot from SD, sector size 0x400 */ BOOT_FROM SD 0x400 diff --git a/board/aristainetos/aristainetos2.cfg b/board/aristainetos/aristainetos2.cfg index d088cc8..2454ac5 100644 --- a/board/aristainetos/aristainetos2.cfg +++ b/board/aristainetos/aristainetos2.cfg @@ -21,7 +21,6 @@ IMAGE_VERSION 2 */ BOOT_FROM spi -#define __ASSEMBLY__ #include <config.h> #ifdef CONFIG_IMX_HAB CSF CONFIG_CSF_SIZE diff --git a/board/beacon/imx8mm/imximage-8mm-lpddr4.cfg b/board/beacon/imx8mm/imximage-8mm-lpddr4.cfg index 90573be..2006152 100644 --- a/board/beacon/imx8mm/imximage-8mm-lpddr4.cfg +++ b/board/beacon/imx8mm/imximage-8mm-lpddr4.cfg @@ -3,7 +3,6 @@ * Copyright 2021 NXP */ -#define __ASSEMBLY__ BOOT_FROM sd LOADER u-boot-spl-ddr.bin 0x7E1000 diff --git a/board/beacon/imx8mn/imximage-8mn-lpddr4.cfg b/board/beacon/imx8mn/imximage-8mn-lpddr4.cfg index 7286b26..0edda9c 100644 --- a/board/beacon/imx8mn/imximage-8mn-lpddr4.cfg +++ b/board/beacon/imx8mn/imximage-8mn-lpddr4.cfg @@ -3,7 +3,6 @@ * Copyright 2021 NXP */ -#define __ASSEMBLY__ ROM_VERSION v2 BOOT_FROM sd diff --git a/board/boundary/nitrogen6x/nitrogen6dl.cfg b/board/boundary/nitrogen6x/nitrogen6dl.cfg index 9558e26..a57b16a 100644 --- a/board/boundary/nitrogen6x/nitrogen6dl.cfg +++ b/board/boundary/nitrogen6x/nitrogen6dl.cfg @@ -17,7 +17,6 @@ IMAGE_VERSION 2 */ BOOT_FROM spi -#define __ASSEMBLY__ #include <config.h> #ifdef CONFIG_IMX_HAB CSF CONFIG_CSF_SIZE diff --git a/board/boundary/nitrogen6x/nitrogen6dl2g.cfg b/board/boundary/nitrogen6x/nitrogen6dl2g.cfg index f5a107c..7379b89 100644 --- a/board/boundary/nitrogen6x/nitrogen6dl2g.cfg +++ b/board/boundary/nitrogen6x/nitrogen6dl2g.cfg @@ -17,7 +17,6 @@ IMAGE_VERSION 2 */ BOOT_FROM spi -#define __ASSEMBLY__ #include <config.h> #ifdef CONFIG_IMX_HAB CSF CONFIG_CSF_SIZE diff --git a/board/boundary/nitrogen6x/nitrogen6q.cfg b/board/boundary/nitrogen6x/nitrogen6q.cfg index b0bbf0d..c7029ab 100644 --- a/board/boundary/nitrogen6x/nitrogen6q.cfg +++ b/board/boundary/nitrogen6x/nitrogen6q.cfg @@ -17,7 +17,6 @@ IMAGE_VERSION 2 */ BOOT_FROM spi -#define __ASSEMBLY__ #include <config.h> #ifdef CONFIG_IMX_HAB CSF CONFIG_CSF_SIZE diff --git a/board/boundary/nitrogen6x/nitrogen6q2g.cfg b/board/boundary/nitrogen6x/nitrogen6q2g.cfg index 4999254..1d58cd4 100644 --- a/board/boundary/nitrogen6x/nitrogen6q2g.cfg +++ b/board/boundary/nitrogen6x/nitrogen6q2g.cfg @@ -17,7 +17,6 @@ IMAGE_VERSION 2 */ BOOT_FROM spi -#define __ASSEMBLY__ #include <config.h> #ifdef CONFIG_IMX_HAB CSF CONFIG_CSF_SIZE diff --git a/board/boundary/nitrogen6x/nitrogen6s.cfg b/board/boundary/nitrogen6x/nitrogen6s.cfg index 16d7784..b16d944 100644 --- a/board/boundary/nitrogen6x/nitrogen6s.cfg +++ b/board/boundary/nitrogen6x/nitrogen6s.cfg @@ -17,7 +17,6 @@ IMAGE_VERSION 2 */ BOOT_FROM spi -#define __ASSEMBLY__ #include <config.h> #ifdef CONFIG_IMX_HAB CSF CONFIG_CSF_SIZE diff --git a/board/boundary/nitrogen6x/nitrogen6s1g.cfg b/board/boundary/nitrogen6x/nitrogen6s1g.cfg index 0320078..debec75 100644 --- a/board/boundary/nitrogen6x/nitrogen6s1g.cfg +++ b/board/boundary/nitrogen6x/nitrogen6s1g.cfg @@ -17,7 +17,6 @@ IMAGE_VERSION 2 */ BOOT_FROM spi -#define __ASSEMBLY__ #include <config.h> #ifdef CONFIG_IMX_HAB CSF CONFIG_CSF_SIZE diff --git a/board/compulab/imx8mm-cl-iot-gate/imximage-8mm-lpddr4.cfg b/board/compulab/imx8mm-cl-iot-gate/imximage-8mm-lpddr4.cfg index 4071219..f9ce7f8 100644 --- a/board/compulab/imx8mm-cl-iot-gate/imximage-8mm-lpddr4.cfg +++ b/board/compulab/imx8mm-cl-iot-gate/imximage-8mm-lpddr4.cfg @@ -3,7 +3,6 @@ * Copyright 2021 NXP */ -#define __ASSEMBLY__ BOOT_FROM sd LOADER u-boot-spl-ddr.bin 0x7e1000 diff --git a/board/congatec/cgtqmx8/imximage.cfg b/board/congatec/cgtqmx8/imximage.cfg index e324c7c..5ecde0c 100644 --- a/board/congatec/cgtqmx8/imximage.cfg +++ b/board/congatec/cgtqmx8/imximage.cfg @@ -3,7 +3,6 @@ * Copyright 2018 NXP */ -#define __ASSEMBLY__ /* Boot from SD, sector size 0x400 */ BOOT_FROM SD 0x400 diff --git a/board/ea/mx7ulp_com/imximage.cfg b/board/ea/mx7ulp_com/imximage.cfg index 1b21899..1731da8 100644 --- a/board/ea/mx7ulp_com/imximage.cfg +++ b/board/ea/mx7ulp_com/imximage.cfg @@ -9,7 +9,6 @@ * The syntax is taken as close as possible with the kwbimage */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg b/board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg index 90573be..2006152 100644 --- a/board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg +++ b/board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg @@ -3,7 +3,6 @@ * Copyright 2021 NXP */ -#define __ASSEMBLY__ BOOT_FROM sd LOADER u-boot-spl-ddr.bin 0x7E1000 diff --git a/board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg b/board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg index 7286b26..0edda9c 100644 --- a/board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg +++ b/board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg @@ -3,7 +3,6 @@ * Copyright 2021 NXP */ -#define __ASSEMBLY__ ROM_VERSION v2 BOOT_FROM sd diff --git a/board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg b/board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg index 4c3ecf5..6dedf17 100644 --- a/board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg +++ b/board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg @@ -3,7 +3,6 @@ * Copyright 2021 NXP */ -#define __ASSEMBLY__ ROM_VERSION v2 BOOT_FROM sd diff --git a/board/freescale/imx8qm_mek/imximage.cfg b/board/freescale/imx8qm_mek/imximage.cfg index 7dc6b93..7161267 100644 --- a/board/freescale/imx8qm_mek/imximage.cfg +++ b/board/freescale/imx8qm_mek/imximage.cfg @@ -3,7 +3,6 @@ * Copyright 2018 NXP */ -#define __ASSEMBLY__ /* Boot from SD, sector size 0x400 */ BOOT_FROM SD 0x400 diff --git a/board/freescale/imx8qm_mek/uboot-container.cfg b/board/freescale/imx8qm_mek/uboot-container.cfg index 6cc47cd..93c5d39 100644 --- a/board/freescale/imx8qm_mek/uboot-container.cfg +++ b/board/freescale/imx8qm_mek/uboot-container.cfg @@ -3,7 +3,6 @@ * Copyright 2019 NXP */ -#define __ASSEMBLY__ /* This file is to create a container image could be loaded by SPL */ BOOT_FROM SD 0x400 diff --git a/board/freescale/imx8qxp_mek/imximage.cfg b/board/freescale/imx8qxp_mek/imximage.cfg index cd747d2..89a4736 100644 --- a/board/freescale/imx8qxp_mek/imximage.cfg +++ b/board/freescale/imx8qxp_mek/imximage.cfg @@ -6,7 +6,6 @@ * and create imx8image boot image */ -#define __ASSEMBLY__ /* Boot from SD, sector size 0x400 */ BOOT_FROM SD 0x400 diff --git a/board/freescale/imx8qxp_mek/uboot-container.cfg b/board/freescale/imx8qxp_mek/uboot-container.cfg index 8165811..b53896f 100644 --- a/board/freescale/imx8qxp_mek/uboot-container.cfg +++ b/board/freescale/imx8qxp_mek/uboot-container.cfg @@ -3,7 +3,6 @@ * Copyright 2019 NXP */ -#define __ASSEMBLY__ /* This file is to create a container image could be loaded by SPL */ BOOT_FROM SD 0x400 diff --git a/board/freescale/imxrt1020-evk/imximage.cfg b/board/freescale/imxrt1020-evk/imximage.cfg index 9bcc2c1..0ed7147 100644 --- a/board/freescale/imxrt1020-evk/imximage.cfg +++ b/board/freescale/imxrt1020-evk/imximage.cfg @@ -4,7 +4,6 @@ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/freescale/imxrt1050-evk/imximage.cfg b/board/freescale/imxrt1050-evk/imximage.cfg index cf1665b..f1f09fd 100644 --- a/board/freescale/imxrt1050-evk/imximage.cfg +++ b/board/freescale/imxrt1050-evk/imximage.cfg @@ -4,7 +4,6 @@ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/freescale/mx6slevk/imximage.cfg b/board/freescale/mx6slevk/imximage.cfg index b97761a..64be101 100644 --- a/board/freescale/mx6slevk/imximage.cfg +++ b/board/freescale/mx6slevk/imximage.cfg @@ -7,7 +7,6 @@ * * The syntax is taken as close as possible with the kwbimage */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/freescale/mx6sllevk/imximage.cfg b/board/freescale/mx6sllevk/imximage.cfg index 74b3a90..550be3f 100644 --- a/board/freescale/mx6sllevk/imximage.cfg +++ b/board/freescale/mx6sllevk/imximage.cfg @@ -8,7 +8,6 @@ * The syntax is taken as close as possible with the kwbimage */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/freescale/mx6sxsabreauto/imximage.cfg b/board/freescale/mx6sxsabreauto/imximage.cfg index 4a0bcc5..da70309 100644 --- a/board/freescale/mx6sxsabreauto/imximage.cfg +++ b/board/freescale/mx6sxsabreauto/imximage.cfg @@ -3,7 +3,6 @@ * Copyright (C) 2014 Freescale Semiconductor, Inc. */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/freescale/mx6sxsabresd/imximage.cfg b/board/freescale/mx6sxsabresd/imximage.cfg index 28ffb2f..313ab58 100644 --- a/board/freescale/mx6sxsabresd/imximage.cfg +++ b/board/freescale/mx6sxsabresd/imximage.cfg @@ -3,7 +3,6 @@ * Copyright (C) 2014 Freescale Semiconductor, Inc. */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/freescale/mx6ullevk/imximage.cfg b/board/freescale/mx6ullevk/imximage.cfg index 1555039..0c6f444 100644 --- a/board/freescale/mx6ullevk/imximage.cfg +++ b/board/freescale/mx6ullevk/imximage.cfg @@ -8,7 +8,6 @@ * The syntax is taken as close as possible with the kwbimage */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/freescale/mx7dsabresd/imximage.cfg b/board/freescale/mx7dsabresd/imximage.cfg index 05446ac..59e66fb 100644 --- a/board/freescale/mx7dsabresd/imximage.cfg +++ b/board/freescale/mx7dsabresd/imximage.cfg @@ -8,7 +8,6 @@ * The syntax is taken as close as possible with the kwbimage */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/freescale/mx7ulp_evk/imximage.cfg b/board/freescale/mx7ulp_evk/imximage.cfg index ec36730..62fd79a 100644 --- a/board/freescale/mx7ulp_evk/imximage.cfg +++ b/board/freescale/mx7ulp_evk/imximage.cfg @@ -8,7 +8,6 @@ * The syntax is taken as close as possible with the kwbimage */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/gateworks/venice/imximage-8mm-lpddr4.cfg b/board/gateworks/venice/imximage-8mm-lpddr4.cfg index ccaa765..6bc457c 100644 --- a/board/gateworks/venice/imximage-8mm-lpddr4.cfg +++ b/board/gateworks/venice/imximage-8mm-lpddr4.cfg @@ -3,7 +3,6 @@ * Copyright 2021 Gateworks Corporation */ -#define __ASSEMBLY__ BOOT_FROM sd LOADER u-boot-spl-ddr.bin 0x7E1000 diff --git a/board/ge/bx50v3/bx50v3.cfg b/board/ge/bx50v3/bx50v3.cfg index de3955a..1386516 100644 --- a/board/ge/bx50v3/bx50v3.cfg +++ b/board/ge/bx50v3/bx50v3.cfg @@ -13,7 +13,6 @@ IMAGE_VERSION 2 BOOT_FROM sd -#define __ASSEMBLY__ #include <config.h> #include "asm/arch/mx6-ddr.h" #include "asm/arch/iomux.h" diff --git a/board/kontron/sl-mx8mm/imximage.cfg b/board/kontron/sl-mx8mm/imximage.cfg index f101f3d..b538026 100644 --- a/board/kontron/sl-mx8mm/imximage.cfg +++ b/board/kontron/sl-mx8mm/imximage.cfg @@ -3,7 +3,6 @@ * Copyright (C) 2019 Kontron Electronics GmbH */ -#define __ASSEMBLY__ BOOT_FROM sd LOADER u-boot-spl-ddr.bin 0x7E1000 diff --git a/board/novtech/meerkat96/imximage.cfg b/board/novtech/meerkat96/imximage.cfg index 86275b8..a67ce53 100644 --- a/board/novtech/meerkat96/imximage.cfg +++ b/board/novtech/meerkat96/imximage.cfg @@ -9,7 +9,6 @@ * The syntax is taken as close as possible with the kwbimage */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/out4/o4-imx6ull-nano/K4B4G1646D-BCMA.cfg b/board/out4/o4-imx6ull-nano/K4B4G1646D-BCMA.cfg index c0dcfe9..38c4572 100644 --- a/board/out4/o4-imx6ull-nano/K4B4G1646D-BCMA.cfg +++ b/board/out4/o4-imx6ull-nano/K4B4G1646D-BCMA.cfg @@ -2,7 +2,6 @@ // Copyright (C) 2016 Freescale Semiconductor, Inc. // Copyright (C) 2021 Oleh Kravchenko <oleg@kaa.org.ua> -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/out4/o4-imx6ull-nano/MT41K256M16HA-125E.cfg b/board/out4/o4-imx6ull-nano/MT41K256M16HA-125E.cfg index 6f823a7..497e7f8 100644 --- a/board/out4/o4-imx6ull-nano/MT41K256M16HA-125E.cfg +++ b/board/out4/o4-imx6ull-nano/MT41K256M16HA-125E.cfg @@ -2,7 +2,6 @@ // Copyright (C) 2016 Freescale Semiconductor, Inc. // Copyright (C) 2021 Oleh Kravchenko <oleg@kaa.org.ua> -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/phytec/phycore_imx8mm/imximage-8mm-sd.cfg b/board/phytec/phycore_imx8mm/imximage-8mm-sd.cfg index ea74fb7..722e62c 100644 --- a/board/phytec/phycore_imx8mm/imximage-8mm-sd.cfg +++ b/board/phytec/phycore_imx8mm/imximage-8mm-sd.cfg @@ -3,7 +3,6 @@ * Copyright 2021 Phytec Messtechnik GmbH */ -#define __ASSEMBLY__ BOOT_FROM sd LOADER u-boot-spl-ddr.bin 0x7E1000 diff --git a/board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg b/board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg index 4c3ecf5..6dedf17 100644 --- a/board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg +++ b/board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg @@ -3,7 +3,6 @@ * Copyright 2021 NXP */ -#define __ASSEMBLY__ ROM_VERSION v2 BOOT_FROM sd diff --git a/board/ronetix/imx8mq-cm/imximage-8mq-lpddr4.cfg b/board/ronetix/imx8mq-cm/imximage-8mq-lpddr4.cfg index 268b5ae..fae7ad8 100644 --- a/board/ronetix/imx8mq-cm/imximage-8mq-lpddr4.cfg +++ b/board/ronetix/imx8mq-cm/imximage-8mq-lpddr4.cfg @@ -3,7 +3,6 @@ * Copyright 2021 NXP */ -#define __ASSEMBLY__ BOOT_FROM sd LOADER mkimage.flash.mkimage 0x7E1000
\ No newline at end of file diff --git a/board/siemens/capricorn/imximage.cfg b/board/siemens/capricorn/imximage.cfg index 9f9df68..fa871ba 100644 --- a/board/siemens/capricorn/imximage.cfg +++ b/board/siemens/capricorn/imximage.cfg @@ -6,7 +6,6 @@ * and create imx8image boot image */ -#define __ASSEMBLY__ /* Boot from SD, sector size 0x400 */ BOOT_FROM SD 0x400 diff --git a/board/siemens/capricorn/uboot-container.cfg b/board/siemens/capricorn/uboot-container.cfg index 8165811..b53896f 100644 --- a/board/siemens/capricorn/uboot-container.cfg +++ b/board/siemens/capricorn/uboot-container.cfg @@ -3,7 +3,6 @@ * Copyright 2019 NXP */ -#define __ASSEMBLY__ /* This file is to create a container image could be loaded by SPL */ BOOT_FROM SD 0x400 diff --git a/board/softing/vining_2000/imximage.cfg b/board/softing/vining_2000/imximage.cfg index f6f59dd..300aafc 100644 --- a/board/softing/vining_2000/imximage.cfg +++ b/board/softing/vining_2000/imximage.cfg @@ -4,7 +4,6 @@ * Copyright (C) 2017-2019 softing automotive electronics gmbH */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/somlabs/visionsom-6ull/imximage.cfg b/board/somlabs/visionsom-6ull/imximage.cfg index b49a2df..370b303 100644 --- a/board/somlabs/visionsom-6ull/imximage.cfg +++ b/board/somlabs/visionsom-6ull/imximage.cfg @@ -9,7 +9,6 @@ * The syntax is taken as close as possible with the kwbimage */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/storopack/smegw01/imximage.cfg b/board/storopack/smegw01/imximage.cfg index 5ebeea5..f862828 100644 --- a/board/storopack/smegw01/imximage.cfg +++ b/board/storopack/smegw01/imximage.cfg @@ -8,7 +8,6 @@ * The syntax is taken as close as possible with the kwbimage */ -#define __ASSEMBLY__ #include <config.h> IMAGE_VERSION 2 diff --git a/board/tbs/tbs2910/tbs2910.cfg b/board/tbs/tbs2910/tbs2910.cfg index 3ca807b..2fa7094 100644 --- a/board/tbs/tbs2910/tbs2910.cfg +++ b/board/tbs/tbs2910/tbs2910.cfg @@ -3,7 +3,6 @@ * Copyright (C) 2017 Soeren Moch <smoch@web.de> */ -#define __ASSEMBLY__ #include "asm/arch/crm_regs.h" #include "asm/arch/iomux.h" #include "asm/arch/mx6-ddr.h" diff --git a/board/technexion/pico-imx6ul/imximage.cfg b/board/technexion/pico-imx6ul/imximage.cfg index 993c1da..98de178 100644 --- a/board/technexion/pico-imx6ul/imximage.cfg +++ b/board/technexion/pico-imx6ul/imximage.cfg @@ -8,7 +8,6 @@ * The syntax is taken as close as possible with the kwbimage */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/toradex/apalis-imx8/apalis-imx8-imximage.cfg b/board/toradex/apalis-imx8/apalis-imx8-imximage.cfg index b8f0f3d..16183f9 100644 --- a/board/toradex/apalis-imx8/apalis-imx8-imximage.cfg +++ b/board/toradex/apalis-imx8/apalis-imx8-imximage.cfg @@ -6,7 +6,6 @@ * and create imx8image boot image */ -#define __ASSEMBLY__ /* Boot from SD, sector size 0x400 */ BOOT_FROM EMMC_FASTBOOT 0x400 diff --git a/board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg b/board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg index 58c62d0..c229706 100644 --- a/board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg +++ b/board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg @@ -6,7 +6,6 @@ * and create imx8image boot image */ -#define __ASSEMBLY__ /* Boot from SD, sector size 0x400 */ BOOT_FROM EMMC_FASTBOOT 0x400 diff --git a/board/toradex/colibri-imx6ull/imximage.cfg b/board/toradex/colibri-imx6ull/imximage.cfg index e162cff..0d81f9b 100644 --- a/board/toradex/colibri-imx6ull/imximage.cfg +++ b/board/toradex/colibri-imx6ull/imximage.cfg @@ -9,7 +9,6 @@ * The syntax is taken as close as possible with the kwbimage */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/toradex/colibri-imx8x/colibri-imx8x-imximage.cfg b/board/toradex/colibri-imx8x/colibri-imx8x-imximage.cfg index 44f6c0c..fa176b0 100644 --- a/board/toradex/colibri-imx8x/colibri-imx8x-imximage.cfg +++ b/board/toradex/colibri-imx8x/colibri-imx8x-imximage.cfg @@ -6,7 +6,6 @@ * and create imx8image boot image */ -#define __ASSEMBLY__ /* Boot from SD, sector size 0x400 */ BOOT_FROM EMMC_FASTBOOT 0x400 diff --git a/board/toradex/colibri_imx7/imximage.cfg b/board/toradex/colibri_imx7/imximage.cfg index bdce48b..41b3577 100644 --- a/board/toradex/colibri_imx7/imximage.cfg +++ b/board/toradex/colibri_imx7/imximage.cfg @@ -9,7 +9,6 @@ * The syntax is taken as close as possible with the kwbimage */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/toradex/verdin-imx8mm/imximage.cfg b/board/toradex/verdin-imx8mm/imximage.cfg index fcc9200..0e02e44 100644 --- a/board/toradex/verdin-imx8mm/imximage.cfg +++ b/board/toradex/verdin-imx8mm/imximage.cfg @@ -3,7 +3,6 @@ * Copyright 2020-2021 Toradex */ -#define __ASSEMBLY__ BOOT_FROM emmc_fastboot LOADER u-boot-spl-ddr.bin 0x7e1000 diff --git a/board/toradex/verdin-imx8mp/imximage.cfg b/board/toradex/verdin-imx8mp/imximage.cfg index 7d72de8..969cc73 100644 --- a/board/toradex/verdin-imx8mp/imximage.cfg +++ b/board/toradex/verdin-imx8mp/imximage.cfg @@ -3,8 +3,6 @@ * Copyright 2022 Toradex */ -#define __ASSEMBLY__ - ROM_VERSION v2 BOOT_FROM emmc_fastboot LOADER u-boot-spl-ddr.bin 0x920000 diff --git a/board/tq/tqma6/tqma6dl.cfg b/board/tq/tqma6/tqma6dl.cfg index 80c7150..8cd1885 100644 --- a/board/tq/tqma6/tqma6dl.cfg +++ b/board/tq/tqma6/tqma6dl.cfg @@ -11,7 +11,6 @@ /* image version */ IMAGE_VERSION 2 -#define __ASSEMBLY__ #include <config.h> /* diff --git a/board/tq/tqma6/tqma6q.cfg b/board/tq/tqma6/tqma6q.cfg index 82a0a27..a49489a 100644 --- a/board/tq/tqma6/tqma6q.cfg +++ b/board/tq/tqma6/tqma6q.cfg @@ -11,7 +11,6 @@ /* image version */ IMAGE_VERSION 2 -#define __ASSEMBLY__ #include <config.h> /* diff --git a/board/tq/tqma6/tqma6s.cfg b/board/tq/tqma6/tqma6s.cfg index 9cdbb3c..02f7e10 100644 --- a/board/tq/tqma6/tqma6s.cfg +++ b/board/tq/tqma6/tqma6s.cfg @@ -11,7 +11,6 @@ /* image version */ IMAGE_VERSION 2 -#define __ASSEMBLY__ #include <config.h> /* diff --git a/board/variscite/imx8mn_var_som/imximage-8mn-ddr4.cfg b/board/variscite/imx8mn_var_som/imximage-8mn-ddr4.cfg index 2083233..a0091cd 100644 --- a/board/variscite/imx8mn_var_som/imximage-8mn-ddr4.cfg +++ b/board/variscite/imx8mn_var_som/imximage-8mn-ddr4.cfg @@ -3,8 +3,6 @@ * Copyright 2021 Collabora Ltd. */ -#define __ASSEMBLY__ - ROM_VERSION v2 BOOT_FROM sd LOADER u-boot-spl-ddr.bin 0x912000 diff --git a/board/warp/imximage.cfg b/board/warp/imximage.cfg index d952c6f..f6bc604 100644 --- a/board/warp/imximage.cfg +++ b/board/warp/imximage.cfg @@ -7,7 +7,6 @@ * * The syntax is taken as close as possible with the kwbimage */ -#define __ASSEMBLY__ #include <config.h> /* image version */ diff --git a/board/warp7/imximage.cfg b/board/warp7/imximage.cfg index 9e7d472..ca22ee1 100644 --- a/board/warp7/imximage.cfg +++ b/board/warp7/imximage.cfg @@ -8,7 +8,6 @@ * The syntax is taken as close as possible with the kwbimage */ -#define __ASSEMBLY__ #include <config.h> IMAGE_VERSION 2 diff --git a/common/bloblist.c b/common/bloblist.c index 056b50c..406073c 100644 --- a/common/bloblist.c +++ b/common/bloblist.c @@ -430,18 +430,23 @@ void bloblist_reloc(void *to, uint to_size, void *from, uint from_size) int bloblist_init(void) { + bool fixed = IS_ENABLED(CONFIG_BLOBLIST_FIXED); int ret = -ENOENT; ulong addr, size; bool expected; /** - * Wed expect to find an existing bloblist in the first phase of U-Boot - * that runs + * We don't expect to find an existing bloblist in the first phase of + * U-Boot that runs. Also we have no way to receive the address of an + * allocated bloblist from a previous stage, so it must be at a fixed + * address. */ - expected = !u_boot_first_phase(); + expected = fixed && !u_boot_first_phase(); if (spl_prev_phase() == PHASE_TPL && !IS_ENABLED(CONFIG_TPL_BLOBLIST)) expected = false; - addr = bloblist_addr(); + if (fixed) + addr = IF_ENABLED_INT(CONFIG_BLOBLIST_FIXED, + CONFIG_BLOBLIST_ADDR); size = CONFIG_BLOBLIST_SIZE; if (expected) { ret = bloblist_check(addr, size); @@ -460,6 +465,8 @@ int bloblist_init(void) if (!ptr) return log_msg_ret("alloc", -ENOMEM); addr = map_to_sysmem(ptr); + } else if (!fixed) { + return log_msg_ret("!fixed", ret); } log_debug("Creating new bloblist size %lx at %lx\n", size, addr); diff --git a/configs/M5253DEMO_defconfig b/configs/M5253DEMO_defconfig index 67f9875..348f525 100644 --- a/configs/M5253DEMO_defconfig +++ b/configs/M5253DEMO_defconfig @@ -20,6 +20,14 @@ CONFIG_CMD_FAT=y CONFIG_MAC_PARTITION=y CONFIG_ENV_ADDR=0xFF804000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0xA0 +CONFIG_SYS_ATA_REG_OFFSET=0xA0 +CONFIG_SYS_ATA_ALT_OFFSET=0xC0 +CONFIG_SYS_ATA_IDE0_OFFSET=0 +CONFIG_ATAPI=y +CONFIG_IDE_RESET=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y CONFIG_SYS_FSL_I2C_OFFSET=0x280 diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig index 192bcae..eac5b74 100644 --- a/configs/MPC837XERDB_defconfig +++ b/configs/MPC837XERDB_defconfig @@ -170,6 +170,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_ADDR=0xFE080000 CONFIG_DM=y CONFIG_FSL_SATA=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_SYS_BR0_PRELIM_BOOL=y CONFIG_SYS_BR0_PRELIM=0xFE001001 CONFIG_SYS_OR0_PRELIM=0xFF800193 diff --git a/configs/P1010RDB-PA_36BIT_NAND_defconfig b/configs/P1010RDB-PA_36BIT_NAND_defconfig index ef7f24b..61fd2a7 100644 --- a/configs/P1010RDB-PA_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig @@ -54,6 +54,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PA_36BIT_NOR_defconfig b/configs/P1010RDB-PA_36BIT_NOR_defconfig index 892a8a6..0e537eb 100644 --- a/configs/P1010RDB-PA_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PA_36BIT_NOR_defconfig @@ -36,6 +36,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig index 705d0da..dc113be 100644 --- a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig @@ -48,6 +48,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig index e4ad50f..cd5c80c 100644 --- a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig @@ -50,6 +50,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig index b303c4c..f80a0d9 100644 --- a/configs/P1010RDB-PA_NAND_defconfig +++ b/configs/P1010RDB-PA_NAND_defconfig @@ -53,6 +53,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig index 8db09ba..035aac2 100644 --- a/configs/P1010RDB-PA_NOR_defconfig +++ b/configs/P1010RDB-PA_NOR_defconfig @@ -35,6 +35,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PA_SDCARD_defconfig b/configs/P1010RDB-PA_SDCARD_defconfig index f02757d..cd031d2 100644 --- a/configs/P1010RDB-PA_SDCARD_defconfig +++ b/configs/P1010RDB-PA_SDCARD_defconfig @@ -47,6 +47,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PA_SPIFLASH_defconfig b/configs/P1010RDB-PA_SPIFLASH_defconfig index 9a09473..f339502 100644 --- a/configs/P1010RDB-PA_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_SPIFLASH_defconfig @@ -49,6 +49,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PB_36BIT_NAND_defconfig b/configs/P1010RDB-PB_36BIT_NAND_defconfig index 8582868..ba64f88 100644 --- a/configs/P1010RDB-PB_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig @@ -55,6 +55,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PB_36BIT_NOR_defconfig b/configs/P1010RDB-PB_36BIT_NOR_defconfig index 84173e2..a8e9556 100644 --- a/configs/P1010RDB-PB_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PB_36BIT_NOR_defconfig @@ -37,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig index 4b0a1ab..8719967 100644 --- a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig @@ -49,6 +49,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig index 986b992..2d646f9 100644 --- a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig @@ -51,6 +51,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig index e436476..f8437ff 100644 --- a/configs/P1010RDB-PB_NAND_defconfig +++ b/configs/P1010RDB-PB_NAND_defconfig @@ -54,6 +54,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PB_NOR_defconfig b/configs/P1010RDB-PB_NOR_defconfig index 62f4c89..b99531c 100644 --- a/configs/P1010RDB-PB_NOR_defconfig +++ b/configs/P1010RDB-PB_NOR_defconfig @@ -36,6 +36,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PB_SDCARD_defconfig b/configs/P1010RDB-PB_SDCARD_defconfig index 9cdb359..ebe2af6 100644 --- a/configs/P1010RDB-PB_SDCARD_defconfig +++ b/configs/P1010RDB-PB_SDCARD_defconfig @@ -48,6 +48,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P1010RDB-PB_SPIFLASH_defconfig b/configs/P1010RDB-PB_SPIFLASH_defconfig index 299564c..7893782 100644 --- a/configs/P1010RDB-PB_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_SPIFLASH_defconfig @@ -50,6 +50,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_DM_I2C=y diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig index 9dc7257..01d6192 100644 --- a/configs/P2041RDB_NAND_defconfig +++ b/configs/P2041RDB_NAND_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_SYS_BR0_PRELIM_BOOL=y CONFIG_SYS_BR0_PRELIM=0xFFA00C21 diff --git a/configs/P2041RDB_SDCARD_defconfig b/configs/P2041RDB_SDCARD_defconfig index 997f461..dc56c79 100644 --- a/configs/P2041RDB_SDCARD_defconfig +++ b/configs/P2041RDB_SDCARD_defconfig @@ -41,6 +41,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_SYS_BR0_PRELIM_BOOL=y CONFIG_SYS_BR0_PRELIM=0xE8001001 diff --git a/configs/P2041RDB_SPIFLASH_defconfig b/configs/P2041RDB_SPIFLASH_defconfig index d54d621..78a2450 100644 --- a/configs/P2041RDB_SPIFLASH_defconfig +++ b/configs/P2041RDB_SPIFLASH_defconfig @@ -42,6 +42,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_SYS_BR0_PRELIM_BOOL=y CONFIG_SYS_BR0_PRELIM=0xE8001001 diff --git a/configs/P2041RDB_defconfig b/configs/P2041RDB_defconfig index b2fb18c..f6bf4da 100644 --- a/configs/P2041RDB_defconfig +++ b/configs/P2041RDB_defconfig @@ -37,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_SYS_BR0_PRELIM_BOOL=y CONFIG_SYS_BR0_PRELIM=0xE8001001 diff --git a/configs/P3041DS_NAND_defconfig b/configs/P3041DS_NAND_defconfig index 971254a..ec58500 100644 --- a/configs/P3041DS_NAND_defconfig +++ b/configs/P3041DS_NAND_defconfig @@ -38,6 +38,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y diff --git a/configs/P3041DS_SDCARD_defconfig b/configs/P3041DS_SDCARD_defconfig index 7cf3c22..58a3eae 100644 --- a/configs/P3041DS_SDCARD_defconfig +++ b/configs/P3041DS_SDCARD_defconfig @@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y diff --git a/configs/P3041DS_SPIFLASH_defconfig b/configs/P3041DS_SPIFLASH_defconfig index 0e810f8..c48976b 100644 --- a/configs/P3041DS_SPIFLASH_defconfig +++ b/configs/P3041DS_SPIFLASH_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y diff --git a/configs/P3041DS_defconfig b/configs/P3041DS_defconfig index db1b5fb..fcc7361 100644 --- a/configs/P3041DS_defconfig +++ b/configs/P3041DS_defconfig @@ -35,6 +35,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y diff --git a/configs/P5040DS_NAND_defconfig b/configs/P5040DS_NAND_defconfig index 90503b6..279976c 100644 --- a/configs/P5040DS_NAND_defconfig +++ b/configs/P5040DS_NAND_defconfig @@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y diff --git a/configs/P5040DS_SDCARD_defconfig b/configs/P5040DS_SDCARD_defconfig index 90216f6..34ebc51 100644 --- a/configs/P5040DS_SDCARD_defconfig +++ b/configs/P5040DS_SDCARD_defconfig @@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y diff --git a/configs/P5040DS_SPIFLASH_defconfig b/configs/P5040DS_SPIFLASH_defconfig index 8b17812..ea8b673 100644 --- a/configs/P5040DS_SPIFLASH_defconfig +++ b/configs/P5040DS_SPIFLASH_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y diff --git a/configs/P5040DS_defconfig b/configs/P5040DS_defconfig index 6836fcf..e9bf7ff 100644 --- a/configs/P5040DS_defconfig +++ b/configs/P5040DS_defconfig @@ -35,6 +35,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y diff --git a/configs/T2080QDS_NAND_defconfig b/configs/T2080QDS_NAND_defconfig index 521b0cf..1b6ef8a 100644 --- a/configs/T2080QDS_NAND_defconfig +++ b/configs/T2080QDS_NAND_defconfig @@ -56,6 +56,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y diff --git a/configs/T2080QDS_SDCARD_defconfig b/configs/T2080QDS_SDCARD_defconfig index eb0b341..8ab1c5d 100644 --- a/configs/T2080QDS_SDCARD_defconfig +++ b/configs/T2080QDS_SDCARD_defconfig @@ -55,6 +55,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y diff --git a/configs/T2080QDS_SECURE_BOOT_defconfig b/configs/T2080QDS_SECURE_BOOT_defconfig index 97bfbd9..a84b7ad 100644 --- a/configs/T2080QDS_SECURE_BOOT_defconfig +++ b/configs/T2080QDS_SECURE_BOOT_defconfig @@ -40,6 +40,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y diff --git a/configs/T2080QDS_SPIFLASH_defconfig b/configs/T2080QDS_SPIFLASH_defconfig index a09d147..8fd0248 100644 --- a/configs/T2080QDS_SPIFLASH_defconfig +++ b/configs/T2080QDS_SPIFLASH_defconfig @@ -57,6 +57,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y diff --git a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig index db09d3b..f9dbc84 100644 --- a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig @@ -37,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_REMOTE=y CONFIG_ENV_ADDR=0xFFE20000 CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y diff --git a/configs/T2080QDS_defconfig b/configs/T2080QDS_defconfig index c036d5d..424b3f2 100644 --- a/configs/T2080QDS_defconfig +++ b/configs/T2080QDS_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig index 17558d4..1c55d30 100644 --- a/configs/T2080RDB_NAND_defconfig +++ b/configs/T2080RDB_NAND_defconfig @@ -60,6 +60,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133330000 CONFIG_DDR_ECC=y diff --git a/configs/T2080RDB_SDCARD_defconfig b/configs/T2080RDB_SDCARD_defconfig index 949976b..ea9c479 100644 --- a/configs/T2080RDB_SDCARD_defconfig +++ b/configs/T2080RDB_SDCARD_defconfig @@ -59,6 +59,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133330000 CONFIG_DDR_ECC=y diff --git a/configs/T2080RDB_SPIFLASH_defconfig b/configs/T2080RDB_SPIFLASH_defconfig index 66ca339..5e08b82 100644 --- a/configs/T2080RDB_SPIFLASH_defconfig +++ b/configs/T2080RDB_SPIFLASH_defconfig @@ -61,6 +61,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133330000 CONFIG_DDR_ECC=y diff --git a/configs/T2080RDB_defconfig b/configs/T2080RDB_defconfig index 1e53273..1c1fea6 100644 --- a/configs/T2080RDB_defconfig +++ b/configs/T2080RDB_defconfig @@ -44,6 +44,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133330000 CONFIG_DDR_ECC=y diff --git a/configs/T2080RDB_revD_NAND_defconfig b/configs/T2080RDB_revD_NAND_defconfig index 33591c2..ae924b1 100644 --- a/configs/T2080RDB_revD_NAND_defconfig +++ b/configs/T2080RDB_revD_NAND_defconfig @@ -61,6 +61,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133330000 CONFIG_DDR_ECC=y diff --git a/configs/T2080RDB_revD_SDCARD_defconfig b/configs/T2080RDB_revD_SDCARD_defconfig index 82f6c96..fef0893 100644 --- a/configs/T2080RDB_revD_SDCARD_defconfig +++ b/configs/T2080RDB_revD_SDCARD_defconfig @@ -60,6 +60,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133330000 CONFIG_DDR_ECC=y diff --git a/configs/T2080RDB_revD_SPIFLASH_defconfig b/configs/T2080RDB_revD_SPIFLASH_defconfig index 075691f..0b7e715 100644 --- a/configs/T2080RDB_revD_SPIFLASH_defconfig +++ b/configs/T2080RDB_revD_SPIFLASH_defconfig @@ -62,6 +62,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133330000 CONFIG_DDR_ECC=y diff --git a/configs/T2080RDB_revD_defconfig b/configs/T2080RDB_revD_defconfig index 1d5628f..c78b21d 100644 --- a/configs/T2080RDB_revD_defconfig +++ b/configs/T2080RDB_revD_defconfig @@ -45,6 +45,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133330000 CONFIG_DDR_ECC=y diff --git a/configs/T4240RDB_SDCARD_defconfig b/configs/T4240RDB_SDCARD_defconfig index ef2d1d7..ea6a528 100644 --- a/configs/T4240RDB_SDCARD_defconfig +++ b/configs/T4240RDB_SDCARD_defconfig @@ -51,6 +51,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DDR_ECC=y diff --git a/configs/T4240RDB_defconfig b/configs/T4240RDB_defconfig index 6784dd7..e17e8b1 100644 --- a/configs/T4240RDB_defconfig +++ b/configs/T4240RDB_defconfig @@ -36,6 +36,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DDR_ECC=y diff --git a/configs/am57xx_hs_evm_usb_defconfig b/configs/am57xx_hs_evm_usb_defconfig index 7f19d99..10106ab 100644 --- a/configs/am57xx_hs_evm_usb_defconfig +++ b/configs/am57xx_hs_evm_usb_defconfig @@ -102,6 +102,7 @@ CONFIG_DM_PMIC=y CONFIG_PMIC_PALMAS=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_PALMAS=y +CONFIG_SCSI_AHCI_PLAT=y CONFIG_DM_SERIAL=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/configs/apalis-imx8_defconfig b/configs/apalis-imx8_defconfig index 45e0670..43215fa 100644 --- a/configs/apalis-imx8_defconfig +++ b/configs/apalis-imx8_defconfig @@ -12,6 +12,7 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qm-apalis" CONFIG_TARGET_APALIS_IMX8=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y diff --git a/configs/apalis-imx8x_defconfig b/configs/apalis-imx8x_defconfig index 2cd91e1..25da027 100644 --- a/configs/apalis-imx8x_defconfig +++ b/configs/apalis-imx8x_defconfig @@ -12,6 +12,7 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-apalis" CONFIG_TARGET_APALIS_IMX8X=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x89000000 CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y diff --git a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig index 3d55cba..083f50e 100644 --- a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig +++ b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig @@ -17,6 +17,7 @@ CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xfa CONFIG_ZYNQMP_PSU_INIT_ENABLED=y CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x8000000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y diff --git a/configs/bananapi-m5_defconfig b/configs/bananapi-m5_defconfig index 4bf81b2..e61cc90 100644 --- a/configs/bananapi-m5_defconfig +++ b/configs/bananapi-m5_defconfig @@ -10,6 +10,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING="bpi-m5" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/beelink-gsking-x_defconfig b/configs/beelink-gsking-x_defconfig index e60e754..178afa6 100644 --- a/configs/beelink-gsking-x_defconfig +++ b/configs/beelink-gsking-x_defconfig @@ -11,6 +11,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" beelink" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/beelink-gtking_defconfig b/configs/beelink-gtking_defconfig index 2ec3221..4d6aaa5 100644 --- a/configs/beelink-gtking_defconfig +++ b/configs/beelink-gtking_defconfig @@ -11,6 +11,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" beelink" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/beelink-gtkingpro_defconfig b/configs/beelink-gtkingpro_defconfig index 60d316d..65dab87 100644 --- a/configs/beelink-gtkingpro_defconfig +++ b/configs/beelink-gtkingpro_defconfig @@ -11,6 +11,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" beelink" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/bitmain_antminer_s9_defconfig b/configs/bitmain_antminer_s9_defconfig index 26dce00..7b42b7a 100644 --- a/configs/bitmain_antminer_s9_defconfig +++ b/configs/bitmain_antminer_s9_defconfig @@ -15,6 +15,7 @@ CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xe0001000 CONFIG_DEBUG_UART_CLOCK=50000000 CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_CUSTOM_LDSCRIPT=y CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" CONFIG_SYS_LOAD_ADDR=0x0 diff --git a/configs/cgtqmx8_defconfig b/configs/cgtqmx8_defconfig index 91b309a..54b2d20 100644 --- a/configs/cgtqmx8_defconfig +++ b/configs/cgtqmx8_defconfig @@ -17,6 +17,7 @@ CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig index a9b0f35..04f7f5b 100644 --- a/configs/colibri-imx8x_defconfig +++ b/configs/colibri-imx8x_defconfig @@ -12,6 +12,7 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-colibri" CONFIG_TARGET_COLIBRI_IMX8X=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_FIT=y CONFIG_LOG=y diff --git a/configs/comtrend_ar5315u_ram_defconfig b/configs/comtrend_ar5315u_ram_defconfig index 2278763..ed25099 100644 --- a/configs/comtrend_ar5315u_ram_defconfig +++ b/configs/comtrend_ar5315u_ram_defconfig @@ -13,6 +13,7 @@ CONFIG_MIPS_CACHE_DISABLE=y # CONFIG_MIPS_BOOT_ENV_LEGACY is not set CONFIG_MIPS_BOOT_FDT=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80100000 CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y diff --git a/configs/comtrend_ar5387un_ram_defconfig b/configs/comtrend_ar5387un_ram_defconfig index 7497ac2..ea7d7b9 100644 --- a/configs/comtrend_ar5387un_ram_defconfig +++ b/configs/comtrend_ar5387un_ram_defconfig @@ -13,6 +13,7 @@ CONFIG_MIPS_CACHE_DISABLE=y # CONFIG_MIPS_BOOT_ENV_LEGACY is not set CONFIG_MIPS_BOOT_FDT=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80100000 CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y diff --git a/configs/comtrend_ct5361_ram_defconfig b/configs/comtrend_ct5361_ram_defconfig index d37f9bd..71b4d89 100644 --- a/configs/comtrend_ct5361_ram_defconfig +++ b/configs/comtrend_ct5361_ram_defconfig @@ -13,6 +13,7 @@ CONFIG_MIPS_CACHE_DISABLE=y # CONFIG_MIPS_BOOT_ENV_LEGACY is not set CONFIG_MIPS_BOOT_FDT=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80100000 CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y diff --git a/configs/comtrend_vr3032u_ram_defconfig b/configs/comtrend_vr3032u_ram_defconfig index c557326..151c623 100644 --- a/configs/comtrend_vr3032u_ram_defconfig +++ b/configs/comtrend_vr3032u_ram_defconfig @@ -13,6 +13,7 @@ CONFIG_MIPS_CACHE_DISABLE=y # CONFIG_MIPS_BOOT_ENV_LEGACY is not set CONFIG_MIPS_BOOT_FDT=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80100000 CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y diff --git a/configs/comtrend_wap5813n_ram_defconfig b/configs/comtrend_wap5813n_ram_defconfig index 198f13b..722b719 100644 --- a/configs/comtrend_wap5813n_ram_defconfig +++ b/configs/comtrend_wap5813n_ram_defconfig @@ -13,6 +13,7 @@ CONFIG_MIPS_CACHE_DISABLE=y # CONFIG_MIPS_BOOT_ENV_LEGACY is not set CONFIG_MIPS_BOOT_FDT=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80100000 CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y diff --git a/configs/controlcenterdc_defconfig b/configs/controlcenterdc_defconfig index b6eb955..fa41c5e 100644 --- a/configs/controlcenterdc_defconfig +++ b/configs/controlcenterdc_defconfig @@ -77,6 +77,8 @@ CONFIG_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCI_MVEBU=y CONFIG_SCSI=y +CONFIG_SCSI_AHCI_PLAT=y +CONFIG_SYS_SCSI_MAX_SCSI_ID=2 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550=y CONFIG_KIRKWOOD_SPI=y diff --git a/configs/coreboot64_defconfig b/configs/coreboot64_defconfig index 8b88a08..933bea6 100644 --- a/configs/coreboot64_defconfig +++ b/configs/coreboot64_defconfig @@ -47,6 +47,11 @@ CONFIG_TFTP_TSIZE=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set +CONFIG_SYS_IDE_MAXDEVICE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_ALT_OFFSET=0 +CONFIG_ATAPI=y # CONFIG_PCI_PNP is not set CONFIG_SOUND=y CONFIG_SOUND_I8254=y diff --git a/configs/coreboot_defconfig b/configs/coreboot_defconfig index 621b736..dcf8ab3 100644 --- a/configs/coreboot_defconfig +++ b/configs/coreboot_defconfig @@ -42,6 +42,11 @@ CONFIG_TFTP_TSIZE=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set +CONFIG_SYS_IDE_MAXDEVICE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_ALT_OFFSET=0 +CONFIG_ATAPI=y # CONFIG_PCI_PNP is not set CONFIG_SOUND=y CONFIG_SOUND_I8254=y diff --git a/configs/cortina_presidio-asic-base_defconfig b/configs/cortina_presidio-asic-base_defconfig index a6d7178..b8614ff 100644 --- a/configs/cortina_presidio-asic-base_defconfig +++ b/configs/cortina_presidio-asic-base_defconfig @@ -8,6 +8,7 @@ CONFIG_ENV_SIZE=0x20000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" CONFIG_IDENT_STRING="Presidio-SoC" +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x10000000 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_SHOW_BOOT_PROGRESS=y diff --git a/configs/cortina_presidio-asic-emmc_defconfig b/configs/cortina_presidio-asic-emmc_defconfig index 8ba4b67..cbabdab 100644 --- a/configs/cortina_presidio-asic-emmc_defconfig +++ b/configs/cortina_presidio-asic-emmc_defconfig @@ -8,6 +8,7 @@ CONFIG_ENV_SIZE=0x20000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" CONFIG_IDENT_STRING="Presidio-SoC" +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x10000000 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_SHOW_BOOT_PROGRESS=y diff --git a/configs/cortina_presidio-asic-pnand_defconfig b/configs/cortina_presidio-asic-pnand_defconfig index 83e3aea..ccc519a 100644 --- a/configs/cortina_presidio-asic-pnand_defconfig +++ b/configs/cortina_presidio-asic-pnand_defconfig @@ -8,6 +8,7 @@ CONFIG_ENV_SIZE=0x20000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" CONFIG_IDENT_STRING="Presidio-SoC" +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x10000000 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_SHOW_BOOT_PROGRESS=y diff --git a/configs/d2net_v2_defconfig b/configs/d2net_v2_defconfig index a856202..5e2122a 100644 --- a/configs/d2net_v2_defconfig +++ b/configs/d2net_v2_defconfig @@ -47,6 +47,7 @@ CONFIG_ENV_ADDR=0x70000 CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/db-mv784mp-gp_defconfig b/configs/db-mv784mp-gp_defconfig index 3d0b06f..c42bda2 100644 --- a/configs/db-mv784mp-gp_defconfig +++ b/configs/db-mv784mp-gp_defconfig @@ -49,6 +49,7 @@ CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y # CONFIG_MMC is not set diff --git a/configs/deneb_defconfig b/configs/deneb_defconfig index 572d744..3f6d90e 100644 --- a/configs/deneb_defconfig +++ b/configs/deneb_defconfig @@ -21,6 +21,7 @@ CONFIG_ENV_OFFSET_REDUND=0x2000 CONFIG_IDENT_STRING=" ##v01.06" CONFIG_SPL_LOAD_IMX_CONTAINER=y CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg" +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig index 144fd30..1d6a24a 100644 --- a/configs/dns325_defconfig +++ b/configs/dns325_defconfig @@ -41,6 +41,10 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 CONFIG_KIRKWOOD_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig index 063b6c5..a6a0c66 100644 --- a/configs/dragonboard410c_defconfig +++ b/configs/dragonboard410c_defconfig @@ -8,6 +8,7 @@ CONFIG_ENV_OFFSET=0x0 CONFIG_DEFAULT_DEVICE_TREE="dragonboard410c" CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 410C" CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80080000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig index 557013d..2d2b7f5 100644 --- a/configs/dreamplug_defconfig +++ b/configs/dreamplug_defconfig @@ -41,6 +41,11 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=1 +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig index 8e2aea9..130a927 100644 --- a/configs/ds109_defconfig +++ b/configs/ds109_defconfig @@ -39,6 +39,10 @@ CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_ENV_ADDR=0x3D0000 CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y # CONFIG_MMC is not set diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig index a8f61e4..1108d7c 100644 --- a/configs/edminiv2_defconfig +++ b/configs/edminiv2_defconfig @@ -33,6 +33,14 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xFFF84000 CONFIG_NETCONSOLE=y +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_IDE_MAXDEVICE=1 +CONFIG_SYS_ATA_BASE_ADDR=0xf1080000 +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 +CONFIG_SYS_ATA_IDE0_OFFSET=0x4000 CONFIG_SYS_I2C_LEGACY=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/efi-x86_payload32_defconfig b/configs/efi-x86_payload32_defconfig index ed6fed2..04573fc 100644 --- a/configs/efi-x86_payload32_defconfig +++ b/configs/efi-x86_payload32_defconfig @@ -40,6 +40,11 @@ CONFIG_TFTP_TSIZE=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set +CONFIG_SYS_IDE_MAXDEVICE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_ALT_OFFSET=0 +CONFIG_ATAPI=y # CONFIG_PCI_PNP is not set # CONFIG_GZIP is not set CONFIG_EFI=y diff --git a/configs/efi-x86_payload64_defconfig b/configs/efi-x86_payload64_defconfig index 1d4d1f3..df904c8 100644 --- a/configs/efi-x86_payload64_defconfig +++ b/configs/efi-x86_payload64_defconfig @@ -40,6 +40,11 @@ CONFIG_TFTP_TSIZE=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set +CONFIG_SYS_IDE_MAXDEVICE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_ALT_OFFSET=0 +CONFIG_ATAPI=y # CONFIG_PCI_PNP is not set # CONFIG_GZIP is not set CONFIG_EFI=y diff --git a/configs/giedi_defconfig b/configs/giedi_defconfig index a106b89..6c180b0 100644 --- a/configs/giedi_defconfig +++ b/configs/giedi_defconfig @@ -21,6 +21,7 @@ CONFIG_ENV_OFFSET_REDUND=0x2000 CONFIG_IDENT_STRING=" ##v01.07" CONFIG_SPL_LOAD_IMX_CONTAINER=y CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg" +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig index e6eb00a..8d4cd24 100644 --- a/configs/goflexhome_defconfig +++ b/configs/goflexhome_defconfig @@ -45,6 +45,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=1 # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig index e7802af..e304675 100644 --- a/configs/guruplug_defconfig +++ b/configs/guruplug_defconfig @@ -43,6 +43,10 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig index 3e8bfcf..61a25c2 100644 --- a/configs/highbank_defconfig +++ b/configs/highbank_defconfig @@ -29,3 +29,5 @@ CONFIG_BOOTCOUNT_LIMIT=y # CONFIG_MMC is not set CONFIG_CALXEDA_XGMAC=y CONFIG_SCSI=y +CONFIG_SCSI_AHCI_PLAT=y +CONFIG_SYS_SCSI_MAX_SCSI_ID=5 diff --git a/configs/hihope_rzg2_defconfig b/configs/hihope_rzg2_defconfig index 5cc396c..109c1d6 100644 --- a/configs/hihope_rzg2_defconfig +++ b/configs/hihope_rzg2_defconfig @@ -10,6 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="r8a774a1-hihope-rzg2m-u-boot" CONFIG_RCAR_GEN3=y CONFIG_TARGET_HIHOPE_RZG2=y # CONFIG_SPL is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/hikey_defconfig b/configs/hikey_defconfig index 12cba86..9f1ce4e 100644 --- a/configs/hikey_defconfig +++ b/configs/hikey_defconfig @@ -8,6 +8,7 @@ CONFIG_ENV_OFFSET=0x0 CONFIG_DEFAULT_DEVICE_TREE="hi6220-hikey" CONFIG_IDENT_STRING="hikey" CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80000 CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y diff --git a/configs/huawei_hg556a_ram_defconfig b/configs/huawei_hg556a_ram_defconfig index 1a0a13a..9201a00 100644 --- a/configs/huawei_hg556a_ram_defconfig +++ b/configs/huawei_hg556a_ram_defconfig @@ -13,6 +13,7 @@ CONFIG_MIPS_CACHE_DISABLE=y # CONFIG_MIPS_BOOT_ENV_LEGACY is not set CONFIG_MIPS_BOOT_FDT=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80100000 CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig index 23a211c..2655124 100644 --- a/configs/ib62x0_defconfig +++ b/configs/ib62x0_defconfig @@ -42,6 +42,12 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 +CONFIG_SYS_ATA_IDE0_OFFSET=0x2000 +CONFIG_SYS_ATA_IDE1_OFFSET=0x4000 # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/imx28_xea_sb_defconfig b/configs/imx28_xea_sb_defconfig index 8dadae3..332ff3f 100644 --- a/configs/imx28_xea_sb_defconfig +++ b/configs/imx28_xea_sb_defconfig @@ -59,14 +59,6 @@ CONFIG_SPL_OF_PLATDATA=y # CONFIG_SPL_OF_PLATDATA_PARENT is not set CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=3 -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=40000000 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0x0 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y @@ -80,7 +72,6 @@ CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=3 -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SF_DEFAULT_SPEED=40000000 CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_ISSI=y diff --git a/configs/imx8mn_beacon_2g_defconfig b/configs/imx8mn_beacon_2g_defconfig index 1766a43..48503f3 100644 --- a/configs/imx8mn_beacon_2g_defconfig +++ b/configs/imx8mn_beacon_2g_defconfig @@ -22,6 +22,7 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL=y CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 CONFIG_LTO=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x40480000 CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 diff --git a/configs/imx8mn_beacon_defconfig b/configs/imx8mn_beacon_defconfig index 8ac3612..ba8b7b8 100644 --- a/configs/imx8mn_beacon_defconfig +++ b/configs/imx8mn_beacon_defconfig @@ -21,6 +21,7 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL=y CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 CONFIG_LTO=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x40480000 CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 diff --git a/configs/imx8mq_cm_defconfig b/configs/imx8mq_cm_defconfig index f8a9d70..b272070 100644 --- a/configs/imx8mq_cm_defconfig +++ b/configs/imx8mq_cm_defconfig @@ -19,6 +19,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_IMX_BOOTAUX=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x40480000 CONFIG_FIT=y CONFIG_SPL_FIT_PRINT=y diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig index 389a5cb..323a0f3 100644 --- a/configs/imx8mq_evk_defconfig +++ b/configs/imx8mq_evk_defconfig @@ -20,6 +20,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_IMX_BOOTAUX=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x40480000 CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 diff --git a/configs/imx8mq_phanbell_defconfig b/configs/imx8mq_phanbell_defconfig index d5f45a4..a30617d 100644 --- a/configs/imx8mq_phanbell_defconfig +++ b/configs/imx8mq_phanbell_defconfig @@ -20,6 +20,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_IMX_BOOTAUX=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x40480000 CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig index c58c5ff..6a593f8 100644 --- a/configs/imx8qm_mek_defconfig +++ b/configs/imx8qm_mek_defconfig @@ -19,6 +19,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_SPL_LOAD_IMX_CONTAINER=y CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qm_mek/uboot-container.cfg" +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y diff --git a/configs/imx8qm_rom7720_a1_4G_defconfig b/configs/imx8qm_rom7720_a1_4G_defconfig index 0cc30d3..7d6c12c 100644 --- a/configs/imx8qm_rom7720_a1_4G_defconfig +++ b/configs/imx8qm_rom7720_a1_4G_defconfig @@ -15,6 +15,7 @@ CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig index 8a336cb..0d5c3f5 100644 --- a/configs/imx8qxp_mek_defconfig +++ b/configs/imx8qxp_mek_defconfig @@ -19,6 +19,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_SPL_LOAD_IMX_CONTAINER=y CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qxp_mek/uboot-container.cfg" +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y diff --git a/configs/imx8ulp_evk_defconfig b/configs/imx8ulp_evk_defconfig index b444713..0e2a646 100644 --- a/configs/imx8ulp_evk_defconfig +++ b/configs/imx8ulp_evk_defconfig @@ -19,6 +19,7 @@ CONFIG_SPL=y CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000 CONFIG_SPL_LOAD_IMX_CONTAINER=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80480000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y diff --git a/configs/inetspace_v2_defconfig b/configs/inetspace_v2_defconfig index 8779e58..c45156c 100644 --- a/configs/inetspace_v2_defconfig +++ b/configs/inetspace_v2_defconfig @@ -47,6 +47,7 @@ CONFIG_ENV_ADDR=0x70000 CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=1 CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/j721s2_evm_a72_defconfig b/configs/j721s2_evm_a72_defconfig index 92f668f..f4dc095 100644 --- a/configs/j721s2_evm_a72_defconfig +++ b/configs/j721s2_evm_a72_defconfig @@ -1,18 +1,18 @@ CONFIG_ARM=y CONFIG_ARCH_K3=y +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL_GPIO=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_NR_DRAM_BANKS=2 CONFIG_SOC_K3_J721S2=y CONFIG_TARGET_J721S2_A72_EVM=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x680000 -CONFIG_SYS_MALLOC_LEN=0x2000000 -CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000 CONFIG_DM_GPIO=y CONFIG_SPL_DM_SPI=y +CONFIG_DEFAULT_DEVICE_TREE="k3-j721s2-common-proc-board" CONFIG_SPL_TEXT_BASE=0x80080000 CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y @@ -24,7 +24,6 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y # CONFIG_PSCI_RESET is not set -CONFIG_DEFAULT_DEVICE_TREE="k3-j721s2-common-proc-board" CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y @@ -47,13 +46,13 @@ CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_DM_RESET=y -CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_POWER_DOMAIN=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y # CONFIG_SPL_SPI_FLASH_TINY is not set CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000 CONFIG_SPL_THERMAL=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y @@ -97,13 +96,13 @@ CONFIG_SPL_SYSCON=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_CLK=y CONFIG_SPL_CLK=y -CONFIG_CLK_TI_SCI=y -CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000 -CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000 CONFIG_CLK_CCF=y +CONFIG_CLK_TI_SCI=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_DFU_SF=y +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000 +CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000 CONFIG_DMA_CHANNELS=y CONFIG_TI_K3_NAVSS_UDMA=y CONFIG_USB_FUNCTION_FASTBOOT=y @@ -120,7 +119,6 @@ CONFIG_DM_I2C_GPIO=y CONFIG_SYS_I2C_OMAP24XX=y CONFIG_DM_MAILBOX=y CONFIG_K3_SEC_PROXY=y -CONFIG_DM_MMC=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y @@ -133,7 +131,6 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y @@ -170,8 +167,8 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_RAM=y CONFIG_SPL_RAM=y -CONFIG_REMOTEPROC_TI_K3_R5F=y CONFIG_REMOTEPROC_TI_K3_DSP=y +CONFIG_REMOTEPROC_TI_K3_R5F=y CONFIG_DM_RESET=y CONFIG_RESET_TI_SCI=y CONFIG_SCSI=y @@ -183,13 +180,11 @@ CONFIG_SOC_TI=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_CADENCE_QSPI=y -CONFIG_CADENCE_QSPI_PHY=y CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_TI_SCI=y CONFIG_DM_THERMAL=y CONFIG_USB=y -CONFIG_DM_USB=y CONFIG_DM_USB_GADGET=y CONFIG_SPL_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y diff --git a/configs/j721s2_evm_r5_defconfig b/configs/j721s2_evm_r5_defconfig index f587ec7..09f832e 100644 --- a/configs/j721s2_evm_r5_defconfig +++ b/configs/j721s2_evm_r5_defconfig @@ -1,34 +1,40 @@ -CONFIG_PANIC_HANG=y CONFIG_ARM=y CONFIG_ARCH_K3=y +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SYS_MALLOC_F_LEN=0x10000 CONFIG_SPL_GPIO=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SYS_MALLOC_F_LEN=0x10000 CONFIG_SOC_K3_J721S2=y CONFIG_K3_EARLY_CONS=y CONFIG_TARGET_J721S2_R5_EVM=y CONFIG_ENV_SIZE=0x20000 -CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 CONFIG_DM_GPIO=y CONFIG_SPL_DM_SPI=y +CONFIG_DEFAULT_DEVICE_TREE="k3-j721s2-r5-common-proc-board" CONFIG_SPL_TEXT_BASE=0x41c00000 CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_SIZE_LIMIT=0x80000 +CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000 CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y -CONFIG_DEFAULT_DEVICE_TREE="k3-j721s2-r5-common-proc-board" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000 +CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_USE_BOOTCOMMAND=y # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y +CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y +CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_EARLY_BSS=y @@ -43,7 +49,6 @@ CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_DM_RESET=y -CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_POWER_DOMAIN=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y @@ -51,10 +56,10 @@ CONFIG_SPL_REMOTEPROC=y # CONFIG_SPL_SPI_FLASH_TINY is not set CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 CONFIG_SPL_THERMAL=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y -CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_DFU=y @@ -78,7 +83,10 @@ CONFIG_SPL_SYSCON=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_CLK=y CONFIG_SPL_CLK=y -# CONFIG_CLK_TI_SCI is not set +CONFIG_SPL_CLK_CCF=y +CONFIG_SPL_CLK_K3_PLL=y +CONFIG_SPL_CLK_K3=y +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000 CONFIG_DMA_CHANNELS=y CONFIG_TI_K3_NAVSS_UDMA=y CONFIG_TI_SCI_PROTOCOL=y @@ -91,7 +99,6 @@ CONFIG_DM_MAILBOX=y CONFIG_K3_SEC_PROXY=y CONFIG_FS_LOADER=y CONFIG_SPL_FS_LOADER=y -CONFIG_DM_MMC=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_SPL_MMC_HS400_SUPPORT=y CONFIG_MMC_SDHCI=y @@ -100,7 +107,6 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y @@ -119,7 +125,7 @@ CONFIG_SPL_PINCTRL=y # CONFIG_SPL_PINCTRL_GENERIC is not set CONFIG_PINCTRL_SINGLE=y CONFIG_POWER_DOMAIN=y -# CONFIG_TI_SCI_POWER_DOMAIN is not set +CONFIG_TI_POWER_DOMAIN=y CONFIG_K3_SYSTEM_CONTROLLER=y CONFIG_REMOTEPROC_TI_K3_ARM64=y CONFIG_DM_RESET=y @@ -131,7 +137,6 @@ CONFIG_SOC_TI=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_CADENCE_QSPI=y -CONFIG_CADENCE_QSPI_PHY=y CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_TI_SCI=y @@ -140,7 +145,6 @@ CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_OMAP_TIMER=y CONFIG_USB=y -CONFIG_DM_USB=y CONFIG_DM_USB_GADGET=y CONFIG_SPL_DM_USB_GADGET=y CONFIG_USB_CDNS3=y @@ -153,20 +157,6 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x6168 CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_FS_EXT4=y CONFIG_FS_FAT_MAX_CLUSTSIZE=16384 -CONFIG_TI_POWER_DOMAIN=y -CONFIG_SPL_CLK_CCF=y +CONFIG_PANIC_HANG=y CONFIG_LIB_RATIONAL=y CONFIG_SPL_LIB_RATIONAL=y -CONFIG_SPL_CLK_K3_PLL=y -CONFIG_SPL_CLK_K3=y -CONFIG_K3_DM_FW=y -CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y -CONFIG_OF_LIBFDT=y -CONFIG_SPL_DM_GPIO=y -CONFIG_SYS_MALLOC_LEN=0x2000000 -CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y -CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y -CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y -CONFIG_SPL_SIZE_LIMIT=0x80000 -CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000 -CONFIG_SPL_SYS_MALLOC_SIMPLE=y diff --git a/configs/jethub_j100_defconfig b/configs/jethub_j100_defconfig index a81b16c..b1953e3 100644 --- a/configs/jethub_j100_defconfig +++ b/configs/jethub_j100_defconfig @@ -12,6 +12,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" jethubj100" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x01000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/jethub_j80_defconfig b/configs/jethub_j80_defconfig index eb1e4c4..f3a2325 100644 --- a/configs/jethub_j80_defconfig +++ b/configs/jethub_j80_defconfig @@ -12,6 +12,7 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" jethubj80" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x01000000 CONFIG_OF_BOARD_SETUP=y CONFIG_CONSOLE_MUX=y diff --git a/configs/khadas-vim2_defconfig b/configs/khadas-vim2_defconfig index 81cff3c..9fbb039 100644 --- a/configs/khadas-vim2_defconfig +++ b/configs/khadas-vim2_defconfig @@ -10,6 +10,7 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim2" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y CONFIG_CONSOLE_MUX=y diff --git a/configs/khadas-vim3_android_ab_defconfig b/configs/khadas-vim3_android_ab_defconfig index c5aaaf3..34f352f 100644 --- a/configs/khadas-vim3_android_ab_defconfig +++ b/configs/khadas-vim3_android_ab_defconfig @@ -12,6 +12,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim3" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/khadas-vim3_android_defconfig b/configs/khadas-vim3_android_defconfig index f0b2c20..a694005 100644 --- a/configs/khadas-vim3_android_defconfig +++ b/configs/khadas-vim3_android_defconfig @@ -12,6 +12,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim3" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/khadas-vim3_defconfig b/configs/khadas-vim3_defconfig index 65050ef..5d17cd1 100644 --- a/configs/khadas-vim3_defconfig +++ b/configs/khadas-vim3_defconfig @@ -11,6 +11,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim3" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/khadas-vim3l_android_ab_defconfig b/configs/khadas-vim3l_android_ab_defconfig index 3401c51..4d22db2 100644 --- a/configs/khadas-vim3l_android_ab_defconfig +++ b/configs/khadas-vim3l_android_ab_defconfig @@ -12,6 +12,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim3l" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/khadas-vim3l_android_defconfig b/configs/khadas-vim3l_android_defconfig index 429db2b..e376366 100644 --- a/configs/khadas-vim3l_android_defconfig +++ b/configs/khadas-vim3l_android_defconfig @@ -12,6 +12,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim3l" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/khadas-vim3l_defconfig b/configs/khadas-vim3l_defconfig index b9162c9..f76138f 100644 --- a/configs/khadas-vim3l_defconfig +++ b/configs/khadas-vim3l_defconfig @@ -11,6 +11,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim3l" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/khadas-vim_defconfig b/configs/khadas-vim_defconfig index 81eeff4..93b0fb0 100644 --- a/configs/khadas-vim_defconfig +++ b/configs/khadas-vim_defconfig @@ -10,6 +10,7 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y CONFIG_CONSOLE_MUX=y diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig index 3895cfc..520ab1b 100644 --- a/configs/kontron_sl28_defconfig +++ b/configs/kontron_sl28_defconfig @@ -60,6 +60,7 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y diff --git a/configs/libretech-ac_defconfig b/configs/libretech-ac_defconfig index 945521b..be6fbe8 100644 --- a/configs/libretech-ac_defconfig +++ b/configs/libretech-ac_defconfig @@ -13,6 +13,7 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" libretech-ac" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y diff --git a/configs/libretech-cc_defconfig b/configs/libretech-cc_defconfig index b4413ed..fe678d6 100644 --- a/configs/libretech-cc_defconfig +++ b/configs/libretech-cc_defconfig @@ -10,6 +10,7 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" libretech-cc" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/libretech-cc_v2_defconfig b/configs/libretech-cc_v2_defconfig index 0dae223..4dd668f 100644 --- a/configs/libretech-cc_v2_defconfig +++ b/configs/libretech-cc_v2_defconfig @@ -12,6 +12,7 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" libretech-cc-v2" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y diff --git a/configs/libretech-s905d-pc_defconfig b/configs/libretech-s905d-pc_defconfig index ca96191..0ef7028 100644 --- a/configs/libretech-s905d-pc_defconfig +++ b/configs/libretech-s905d-pc_defconfig @@ -13,6 +13,7 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" libretech-s905d-pc" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y diff --git a/configs/libretech-s912-pc_defconfig b/configs/libretech-s912-pc_defconfig index 02626cb..a4f6d54 100644 --- a/configs/libretech-s912-pc_defconfig +++ b/configs/libretech-s912-pc_defconfig @@ -12,6 +12,7 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" libretech-s912-pc" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y diff --git a/configs/licheepi_nano_defconfig b/configs/licheepi_nano_defconfig index ecec869..2ac0ef4 100644 --- a/configs/licheepi_nano_defconfig +++ b/configs/licheepi_nano_defconfig @@ -1,11 +1,11 @@ CONFIG_ARM=y -CONFIG_ARCH_SUNXI=y -CONFIG_MACH_SUNIV=y CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y -CONFIG_DRAM_CLK=156 CONFIG_SYS_DCACHE_OFF=y -CONFIG_DRAM_ZQ=0 -# CONFIG_VIDEO_SUNXI is not set +CONFIG_ARCH_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c100s-licheepi-nano" CONFIG_SPL=y +CONFIG_MACH_SUNIV=y +CONFIG_DRAM_CLK=156 +CONFIG_DRAM_ZQ=0 +# CONFIG_VIDEO_SUNXI is not set diff --git a/configs/ls1012a2g5rdb_qspi_defconfig b/configs/ls1012a2g5rdb_qspi_defconfig index 312713e..19387ad 100644 --- a/configs/ls1012a2g5rdb_qspi_defconfig +++ b/configs/ls1012a2g5rdb_qspi_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_MPC8XXX_GPIO=y diff --git a/configs/ls1012a2g5rdb_tfa_defconfig b/configs/ls1012a2g5rdb_tfa_defconfig index 6129881..00e8b10 100644 --- a/configs/ls1012a2g5rdb_tfa_defconfig +++ b/configs/ls1012a2g5rdb_tfa_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_MPC8XXX_GPIO=y diff --git a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig index cb8b288..6eaf0f5 100644 --- a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig @@ -37,6 +37,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y diff --git a/configs/ls1012afrwy_qspi_defconfig b/configs/ls1012afrwy_qspi_defconfig index 610f32c..facbb26 100644 --- a/configs/ls1012afrwy_qspi_defconfig +++ b/configs/ls1012afrwy_qspi_defconfig @@ -42,6 +42,7 @@ CONFIG_ENV_ADDR=0x401D0000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y diff --git a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig index b3cb6f7..6e2118f 100644 --- a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig @@ -37,6 +37,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y diff --git a/configs/ls1012afrwy_tfa_defconfig b/configs/ls1012afrwy_tfa_defconfig index afec07c..5370c32 100644 --- a/configs/ls1012afrwy_tfa_defconfig +++ b/configs/ls1012afrwy_tfa_defconfig @@ -41,6 +41,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig index 93e76d9..bac3f91 100644 --- a/configs/ls1012aqds_qspi_defconfig +++ b/configs/ls1012aqds_qspi_defconfig @@ -51,6 +51,7 @@ CONFIG_ENV_SPI_MODE=0x03 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_MPC8XXX_GPIO=y diff --git a/configs/ls1012aqds_tfa_defconfig b/configs/ls1012aqds_tfa_defconfig index d4d9b8f..057c047 100644 --- a/configs/ls1012aqds_tfa_defconfig +++ b/configs/ls1012aqds_tfa_defconfig @@ -52,6 +52,7 @@ CONFIG_ENV_SPI_MODE=0x03 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_MPC8XXX_GPIO=y diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig index 8767c87..771d69e 100644 --- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig index fccbef7..83ba8ee 100644 --- a/configs/ls1012ardb_qspi_defconfig +++ b/configs/ls1012ardb_qspi_defconfig @@ -43,6 +43,7 @@ CONFIG_ENV_ADDR=0x40300000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y diff --git a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig index bf35286..19550ea 100644 --- a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y diff --git a/configs/ls1012ardb_tfa_defconfig b/configs/ls1012ardb_tfa_defconfig index 7a175d3..3df6dd2 100644 --- a/configs/ls1012ardb_tfa_defconfig +++ b/configs/ls1012ardb_tfa_defconfig @@ -42,6 +42,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y diff --git a/configs/ls1021aiot_qspi_defconfig b/configs/ls1021aiot_qspi_defconfig index 4705e34..5943fb6 100644 --- a/configs/ls1021aiot_qspi_defconfig +++ b/configs/ls1021aiot_qspi_defconfig @@ -37,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DM_I2C=y diff --git a/configs/ls1021aiot_sdcard_defconfig b/configs/ls1021aiot_sdcard_defconfig index e387264..e9e3ee9 100644 --- a/configs/ls1021aiot_sdcard_defconfig +++ b/configs/ls1021aiot_sdcard_defconfig @@ -54,6 +54,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DM_I2C=y diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig index afd9318..d587c35 100644 --- a/configs/ls1021aqds_ddr4_nor_defconfig +++ b/configs/ls1021aqds_ddr4_nor_defconfig @@ -50,6 +50,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x60300000 CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig index b27c67b..ebf724a 100644 --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig @@ -51,6 +51,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x60300000 CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig index 915579a..d5a306e 100644 --- a/configs/ls1021aqds_nand_defconfig +++ b/configs/ls1021aqds_nand_defconfig @@ -71,6 +71,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig index 5ab7d27..3fcd533 100644 --- a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig @@ -49,6 +49,7 @@ CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_SYS_FSL_DDR3=y diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig index 934d44f..dda02ae 100644 --- a/configs/ls1021aqds_nor_defconfig +++ b/configs/ls1021aqds_nor_defconfig @@ -50,6 +50,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x60300000 CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig index 1cf2086..188f125 100644 --- a/configs/ls1021aqds_nor_lpuart_defconfig +++ b/configs/ls1021aqds_nor_lpuart_defconfig @@ -51,6 +51,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x60300000 CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig index f967619..9dad311 100644 --- a/configs/ls1021aqds_qspi_defconfig +++ b/configs/ls1021aqds_qspi_defconfig @@ -49,6 +49,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_SYS_FSL_DDR3=y diff --git a/configs/ls1021aqds_sdcard_ifc_defconfig b/configs/ls1021aqds_sdcard_ifc_defconfig index db8a3ae..25afa72 100644 --- a/configs/ls1021aqds_sdcard_ifc_defconfig +++ b/configs/ls1021aqds_sdcard_ifc_defconfig @@ -68,6 +68,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig index 625dd08..3dd2912 100644 --- a/configs/ls1021aqds_sdcard_qspi_defconfig +++ b/configs/ls1021aqds_sdcard_qspi_defconfig @@ -66,6 +66,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_SYS_FSL_DDR3=y diff --git a/configs/ls1021atsn_qspi_defconfig b/configs/ls1021atsn_qspi_defconfig index 5c8cee3..4221060 100644 --- a/configs/ls1021atsn_qspi_defconfig +++ b/configs/ls1021atsn_qspi_defconfig @@ -62,6 +62,7 @@ CONFIG_TSEC_ENET=y CONFIG_NVME=y CONFIG_PCI=y CONFIG_PCIE_LAYERSCAPE_RC=y +CONFIG_SCSI_AHCI_PLAT=y CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/configs/ls1021atsn_sdcard_defconfig b/configs/ls1021atsn_sdcard_defconfig index a3b8f24..627038c 100644 --- a/configs/ls1021atsn_sdcard_defconfig +++ b/configs/ls1021atsn_sdcard_defconfig @@ -78,6 +78,7 @@ CONFIG_TSEC_ENET=y CONFIG_NVME=y CONFIG_PCI=y CONFIG_PCIE_LAYERSCAPE_RC=y +CONFIG_SCSI_AHCI_PLAT=y CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig index f61d29c..0c64cf0 100644 --- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig @@ -43,6 +43,7 @@ CONFIG_CMD_USB=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig index 02c25cd..39ba7be 100644 --- a/configs/ls1021atwr_nor_defconfig +++ b/configs/ls1021atwr_nor_defconfig @@ -44,6 +44,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x60300000 CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_MPC8XXX_GPIO=y diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig index 49d6dda..de3183c 100644 --- a/configs/ls1021atwr_nor_lpuart_defconfig +++ b/configs/ls1021atwr_nor_lpuart_defconfig @@ -45,6 +45,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x60300000 CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_MPC8XXX_GPIO=y diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig index 36a8aee..38f0731 100644 --- a/configs/ls1021atwr_qspi_defconfig +++ b/configs/ls1021atwr_qspi_defconfig @@ -45,6 +45,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_MPC8XXX_GPIO=y diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig index 756e072..a8288e9 100644 --- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig @@ -87,6 +87,7 @@ CONFIG_PCI=y CONFIG_PCIE_LAYERSCAPE_RC=y CONFIG_U_QE=y CONFIG_SYS_QE_FW_ADDR=0x940000 +CONFIG_SCSI_AHCI_PLAT=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig index ede4c95..e43e2ba 100644 --- a/configs/ls1021atwr_sdcard_ifc_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_defconfig @@ -62,6 +62,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_MPC8XXX_GPIO=y diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig index 1315043..429adf3 100644 --- a/configs/ls1021atwr_sdcard_qspi_defconfig +++ b/configs/ls1021atwr_sdcard_qspi_defconfig @@ -62,6 +62,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_MPC8XXX_GPIO=y diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig index 4a38c5e..bbb6f1a 100644 --- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig @@ -17,6 +17,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -43,6 +44,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y # CONFIG_DDR_SPD is not set diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig index 0aed87b..2b90d8a 100644 --- a/configs/ls1028aqds_tfa_defconfig +++ b/configs/ls1028aqds_tfa_defconfig @@ -18,6 +18,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -48,6 +49,7 @@ CONFIG_ENV_ADDR=0x20500000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig index 9b3f672..84696fc 100644 --- a/configs/ls1028aqds_tfa_lpuart_defconfig +++ b/configs/ls1028aqds_tfa_lpuart_defconfig @@ -17,6 +17,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -48,6 +49,7 @@ CONFIG_ENV_ADDR=0x20500000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig index 7931b55..7fc8bec 100644 --- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig @@ -17,6 +17,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -42,6 +43,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y # CONFIG_DDR_SPD is not set diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig index 91e513e..5653590 100644 --- a/configs/ls1028ardb_tfa_defconfig +++ b/configs/ls1028ardb_tfa_defconfig @@ -18,6 +18,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -47,6 +48,7 @@ CONFIG_ENV_ADDR=0x20500000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig index d79039b..342dea5 100644 --- a/configs/ls1043aqds_defconfig +++ b/configs/ls1043aqds_defconfig @@ -21,6 +21,7 @@ CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -49,6 +50,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x60300000 CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig index acb88cc..dd8188a 100644 --- a/configs/ls1043aqds_lpuart_defconfig +++ b/configs/ls1043aqds_lpuart_defconfig @@ -21,6 +21,7 @@ CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -50,6 +51,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x60300000 CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig index a561e8c..6de0666 100644 --- a/configs/ls1043aqds_nand_defconfig +++ b/configs/ls1043aqds_nand_defconfig @@ -27,6 +27,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -69,6 +70,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig index cfd03c9..60f9e16 100644 --- a/configs/ls1043aqds_nor_ddr3_defconfig +++ b/configs/ls1043aqds_nor_ddr3_defconfig @@ -21,6 +21,7 @@ CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -49,6 +50,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x60300000 CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig index 1460844..9724cf9 100644 --- a/configs/ls1043aqds_qspi_defconfig +++ b/configs/ls1043aqds_qspi_defconfig @@ -22,6 +22,7 @@ CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -50,6 +51,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_ADDR=0x40300000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig index a9a1799..aa5ae5e 100644 --- a/configs/ls1043aqds_sdcard_ifc_defconfig +++ b/configs/ls1043aqds_sdcard_ifc_defconfig @@ -28,6 +28,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -68,6 +69,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig index 47d6af3..ebbcd74 100644 --- a/configs/ls1043aqds_sdcard_qspi_defconfig +++ b/configs/ls1043aqds_sdcard_qspi_defconfig @@ -28,6 +28,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -67,6 +68,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig index 37e51da..15cb28b 100644 --- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig @@ -23,6 +23,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -49,6 +50,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig index c84f709..9bffcf7 100644 --- a/configs/ls1043aqds_tfa_defconfig +++ b/configs/ls1043aqds_tfa_defconfig @@ -24,6 +24,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -57,6 +58,7 @@ CONFIG_ENV_SPI_BUS=0 CONFIG_ENV_ADDR=0x60500000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig index c4b0db2..e2762cd 100644 --- a/configs/ls1043ardb_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_SECURE_BOOT_defconfig @@ -13,6 +13,7 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" CONFIG_FSL_LS_PPA=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig index b2cf984..8f3155b 100644 --- a/configs/ls1043ardb_defconfig +++ b/configs/ls1043ardb_defconfig @@ -13,6 +13,7 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" CONFIG_FSL_LS_PPA=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig index 9cb130f..b3c1505 100644 --- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig @@ -15,6 +15,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig index 58b9215..1780675 100644 --- a/configs/ls1043ardb_nand_defconfig +++ b/configs/ls1043ardb_nand_defconfig @@ -19,6 +19,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig index c11e8ec..61e3482 100644 --- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig @@ -16,6 +16,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig index 13ea66b..4977b4e 100644 --- a/configs/ls1043ardb_sdcard_defconfig +++ b/configs/ls1043ardb_sdcard_defconfig @@ -20,6 +20,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig index 3ce21ea..d8d65b8 100644 --- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig @@ -15,6 +15,7 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y diff --git a/configs/ls1043ardb_tfa_defconfig b/configs/ls1043ardb_tfa_defconfig index b7f2c3b..b68c125 100644 --- a/configs/ls1043ardb_tfa_defconfig +++ b/configs/ls1043ardb_tfa_defconfig @@ -16,6 +16,7 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y diff --git a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig index 4225f36..ba381bb 100644 --- a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig @@ -14,6 +14,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -33,6 +34,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y # CONFIG_DDR_SPD is not set CONFIG_MPC8XXX_GPIO=y diff --git a/configs/ls1046afrwy_tfa_defconfig b/configs/ls1046afrwy_tfa_defconfig index e3cfb8c..a2ebe52 100644 --- a/configs/ls1046afrwy_tfa_defconfig +++ b/configs/ls1046afrwy_tfa_defconfig @@ -15,6 +15,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -38,6 +39,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_ADDR=0x40500000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y # CONFIG_DDR_SPD is not set diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig index cb8246f..8e19249 100644 --- a/configs/ls1046aqds_SECURE_BOOT_defconfig +++ b/configs/ls1046aqds_SECURE_BOOT_defconfig @@ -21,6 +21,7 @@ CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -48,6 +49,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig index 9eb3caf..f8b4faa 100644 --- a/configs/ls1046aqds_defconfig +++ b/configs/ls1046aqds_defconfig @@ -21,6 +21,7 @@ CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -50,6 +51,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x60300000 CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig index bce8c6c..37b45ee 100644 --- a/configs/ls1046aqds_lpuart_defconfig +++ b/configs/ls1046aqds_lpuart_defconfig @@ -21,6 +21,7 @@ CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -51,6 +52,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x60300000 CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig index 36d3072..e0e736f 100644 --- a/configs/ls1046aqds_nand_defconfig +++ b/configs/ls1046aqds_nand_defconfig @@ -27,6 +27,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -69,6 +70,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig index cea7d9b..99177d7 100644 --- a/configs/ls1046aqds_qspi_defconfig +++ b/configs/ls1046aqds_qspi_defconfig @@ -22,6 +22,7 @@ CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -51,6 +52,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_ADDR=0x40300000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig index a61239c..83c6c93 100644 --- a/configs/ls1046aqds_sdcard_ifc_defconfig +++ b/configs/ls1046aqds_sdcard_ifc_defconfig @@ -28,6 +28,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -70,6 +71,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig index 4ad624d..291ca2f 100644 --- a/configs/ls1046aqds_sdcard_qspi_defconfig +++ b/configs/ls1046aqds_sdcard_qspi_defconfig @@ -28,6 +28,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -69,6 +70,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig index 5041e4e..92f3b17 100644 --- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig @@ -23,6 +23,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -50,6 +51,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig index 4cc84f8..7ac9406 100644 --- a/configs/ls1046aqds_tfa_defconfig +++ b/configs/ls1046aqds_tfa_defconfig @@ -24,6 +24,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -58,6 +59,7 @@ CONFIG_ENV_SPI_BUS=0 CONFIG_ENV_ADDR=0x60500000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig index 358c857..fe06a2e 100644 --- a/configs/ls1046ardb_emmc_defconfig +++ b/configs/ls1046ardb_emmc_defconfig @@ -21,6 +21,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -59,6 +60,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig index 96733ec..eb94ca3 100644 --- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig @@ -15,6 +15,7 @@ CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -42,6 +43,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig index 4b92ba3..41e735d 100644 --- a/configs/ls1046ardb_qspi_defconfig +++ b/configs/ls1046ardb_qspi_defconfig @@ -16,6 +16,7 @@ CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -45,6 +46,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_ADDR=0x40300000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig index af92ba4..3b4a939 100644 --- a/configs/ls1046ardb_qspi_spl_defconfig +++ b/configs/ls1046ardb_qspi_spl_defconfig @@ -23,6 +23,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y @@ -64,6 +65,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_ENV_IS_NOWHERE=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig index 4ee9316..a8d0231 100644 --- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig @@ -20,6 +20,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -87,6 +88,7 @@ CONFIG_PCIE_LAYERSCAPE_EP=y CONFIG_POWER_LEGACY=y CONFIG_POWER_I2C=y CONFIG_SYS_QE_FMAN_FW_IN_MMC=y +CONFIG_SCSI_AHCI_PLAT=y CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig index ece0dc2..eb43d79 100644 --- a/configs/ls1046ardb_sdcard_defconfig +++ b/configs/ls1046ardb_sdcard_defconfig @@ -21,6 +21,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -58,6 +59,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig index a721704..7e847c8 100644 --- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig @@ -17,6 +17,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -38,6 +39,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.i CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y diff --git a/configs/ls1046ardb_tfa_defconfig b/configs/ls1046ardb_tfa_defconfig index 1c6c157..867acb2 100644 --- a/configs/ls1046ardb_tfa_defconfig +++ b/configs/ls1046ardb_tfa_defconfig @@ -18,6 +18,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -43,6 +44,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_ADDR=0x40500000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfig index 994d98b..f51bc3d 100644 --- a/configs/ls1088aqds_defconfig +++ b/configs/ls1088aqds_defconfig @@ -19,6 +19,7 @@ CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -51,6 +52,7 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x80300000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig index d98641c..6f6206b 100644 --- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig @@ -21,6 +21,7 @@ CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -47,6 +48,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig index 38449f2..68de77e 100644 --- a/configs/ls1088aqds_qspi_defconfig +++ b/configs/ls1088aqds_qspi_defconfig @@ -22,6 +22,7 @@ CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -50,6 +51,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_ADDR=0x20300000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig index 70634a3..ac0601a 100644 --- a/configs/ls1088aqds_sdcard_ifc_defconfig +++ b/configs/ls1088aqds_sdcard_ifc_defconfig @@ -26,6 +26,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_OF_BOARD_SETUP=y CONFIG_DYNAMIC_SYS_CLK_FREQ=y @@ -62,6 +63,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig index 21385a9..3a4f696 100644 --- a/configs/ls1088aqds_sdcard_qspi_defconfig +++ b/configs/ls1088aqds_sdcard_qspi_defconfig @@ -27,6 +27,7 @@ CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -60,6 +61,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y diff --git a/configs/ls1088aqds_tfa_defconfig b/configs/ls1088aqds_tfa_defconfig index 4ff88a5..d4abdb3 100644 --- a/configs/ls1088aqds_tfa_defconfig +++ b/configs/ls1088aqds_tfa_defconfig @@ -24,6 +24,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -59,6 +60,7 @@ CONFIG_ENV_ADDR=0x20500000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig index 614bfca..c4ae4b5 100644 --- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig @@ -21,6 +21,7 @@ CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -49,6 +50,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig index d7e935e..f3c0191 100644 --- a/configs/ls1088ardb_qspi_defconfig +++ b/configs/ls1088ardb_qspi_defconfig @@ -22,6 +22,7 @@ CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -52,6 +53,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_ADDR=0x20300000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig index 048b10f..96a96f5 100644 --- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig @@ -26,6 +26,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -90,6 +91,7 @@ CONFIG_MII=y CONFIG_FSL_LS_MDIO=y CONFIG_PCI=y CONFIG_PCIE_LAYERSCAPE_RC=y +CONFIG_SCSI_AHCI_PLAT=y CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig index 6677583..566e1eb 100644 --- a/configs/ls1088ardb_sdcard_qspi_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_defconfig @@ -27,6 +27,7 @@ CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -62,6 +63,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig index 579ece1..53244a8 100644 --- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig @@ -23,6 +23,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -49,6 +50,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig index 9e4385f..e2f975b 100644 --- a/configs/ls1088ardb_tfa_defconfig +++ b/configs/ls1088ardb_tfa_defconfig @@ -24,6 +24,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -55,6 +56,7 @@ CONFIG_ENV_ADDR=0x20500000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y diff --git a/configs/ls2080aqds_SECURE_BOOT_defconfig b/configs/ls2080aqds_SECURE_BOOT_defconfig index 680d764..45fe718 100644 --- a/configs/ls2080aqds_SECURE_BOOT_defconfig +++ b/configs/ls2080aqds_SECURE_BOOT_defconfig @@ -11,6 +11,7 @@ CONFIG_FSL_USE_PCA9547_MUX=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -39,6 +40,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y diff --git a/configs/ls2080aqds_defconfig b/configs/ls2080aqds_defconfig index bb5de15..b695f8a 100644 --- a/configs/ls2080aqds_defconfig +++ b/configs/ls2080aqds_defconfig @@ -11,6 +11,7 @@ CONFIG_FSL_USE_PCA9547_MUX=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -41,6 +42,7 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x80300000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig index 929d591..57622e6 100644 --- a/configs/ls2080aqds_nand_defconfig +++ b/configs/ls2080aqds_nand_defconfig @@ -15,6 +15,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -52,6 +53,7 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls2080aqds_qspi_defconfig b/configs/ls2080aqds_qspi_defconfig index acb527b..fc0afef 100644 --- a/configs/ls2080aqds_qspi_defconfig +++ b/configs/ls2080aqds_qspi_defconfig @@ -10,6 +10,7 @@ CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds" CONFIG_FSL_USE_PCA9547_MUX=y CONFIG_AHCI=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -42,6 +43,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls2080aqds_sdcard_defconfig b/configs/ls2080aqds_sdcard_defconfig index f6a4595..f24f003 100644 --- a/configs/ls2080aqds_sdcard_defconfig +++ b/configs/ls2080aqds_sdcard_defconfig @@ -17,6 +17,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -49,6 +50,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y diff --git a/configs/ls2080ardb_SECURE_BOOT_defconfig b/configs/ls2080ardb_SECURE_BOOT_defconfig index 305272b..0e84f89 100644 --- a/configs/ls2080ardb_SECURE_BOOT_defconfig +++ b/configs/ls2080ardb_SECURE_BOOT_defconfig @@ -15,6 +15,7 @@ CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -43,6 +44,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DDR_ECC=y diff --git a/configs/ls2080ardb_defconfig b/configs/ls2080ardb_defconfig index 0890b58..d350a31 100644 --- a/configs/ls2080ardb_defconfig +++ b/configs/ls2080ardb_defconfig @@ -15,6 +15,7 @@ CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -45,6 +46,7 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x80300000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133333333 diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig index 37c1d6a..41b6684 100644 --- a/configs/ls2080ardb_nand_defconfig +++ b/configs/ls2080ardb_nand_defconfig @@ -19,6 +19,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -55,6 +56,7 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133333333 diff --git a/configs/ls2081ardb_defconfig b/configs/ls2081ardb_defconfig index f0d5613..2a8a562 100644 --- a/configs/ls2081ardb_defconfig +++ b/configs/ls2081ardb_defconfig @@ -17,6 +17,7 @@ CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -43,6 +44,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y diff --git a/configs/ls2088aqds_tfa_defconfig b/configs/ls2088aqds_tfa_defconfig index ee62dd1..e247f49 100644 --- a/configs/ls2088aqds_tfa_defconfig +++ b/configs/ls2088aqds_tfa_defconfig @@ -15,6 +15,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -50,6 +51,7 @@ CONFIG_ENV_ADDR=0x580500000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig index 2e32d97..e75fa0e 100644 --- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig @@ -17,6 +17,7 @@ CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -41,6 +42,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DDR_ECC=y diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig index f5c7028f..7889300 100644 --- a/configs/ls2088ardb_qspi_defconfig +++ b/configs/ls2088ardb_qspi_defconfig @@ -18,6 +18,7 @@ CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -47,6 +48,7 @@ CONFIG_ENV_ADDR=0x20300000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133333333 diff --git a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig index 97a8faf..032b133 100644 --- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig @@ -19,6 +19,7 @@ CONFIG_QSPI_AHB_INIT=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -46,6 +47,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DDR_ECC=y diff --git a/configs/ls2088ardb_tfa_defconfig b/configs/ls2088ardb_tfa_defconfig index 8567400..ffc3a7b 100644 --- a/configs/ls2088ardb_tfa_defconfig +++ b/configs/ls2088ardb_tfa_defconfig @@ -20,6 +20,7 @@ CONFIG_QSPI_AHB_INIT=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -52,6 +53,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_ADDR=0x580500000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133333333 diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig index 497da09..df214b3 100644 --- a/configs/lschlv2_defconfig +++ b/configs/lschlv2_defconfig @@ -39,6 +39,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=1 CONFIG_KIRKWOOD_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig index cadeb9a..6ccc0e7 100644 --- a/configs/lsxhl_defconfig +++ b/configs/lsxhl_defconfig @@ -39,6 +39,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=1 CONFIG_KIRKWOOD_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig index 685ca1d..d5b8168 100644 --- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig @@ -22,6 +22,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_OF_BOARD_FIXUP=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -49,6 +50,7 @@ CONFIG_MULTI_DTB_FIT=y CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig index 7561a71..b8addd5 100644 --- a/configs/lx2160aqds_tfa_defconfig +++ b/configs/lx2160aqds_tfa_defconfig @@ -23,6 +23,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_OF_BOARD_FIXUP=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -55,6 +56,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_ADDR=0x20500000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig index 98a0f47..f53480c 100644 --- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig @@ -23,6 +23,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_OF_BOARD_FIXUP=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -47,6 +48,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig index 087e685..8798f3e 100644 --- a/configs/lx2160ardb_tfa_defconfig +++ b/configs/lx2160ardb_tfa_defconfig @@ -24,6 +24,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_OF_BOARD_FIXUP=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -54,6 +55,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_ADDR=0x20500000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/lx2160ardb_tfa_stmm_defconfig b/configs/lx2160ardb_tfa_stmm_defconfig index e08c7ab..a46d44d 100644 --- a/configs/lx2160ardb_tfa_stmm_defconfig +++ b/configs/lx2160ardb_tfa_stmm_defconfig @@ -24,6 +24,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_OF_BOARD_FIXUP=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -54,6 +55,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_ADDR=0x20500000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig index da310b7..3158147 100644 --- a/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig @@ -22,6 +22,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_OF_BOARD_FIXUP=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -51,6 +52,7 @@ CONFIG_MULTI_DTB_FIT=y CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y diff --git a/configs/lx2162aqds_tfa_defconfig b/configs/lx2162aqds_tfa_defconfig index 0817396..183769a 100644 --- a/configs/lx2162aqds_tfa_defconfig +++ b/configs/lx2162aqds_tfa_defconfig @@ -23,6 +23,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_OF_BOARD_FIXUP=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -57,6 +58,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_ADDR=0x20500000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/lx2162aqds_tfa_verified_boot_defconfig b/configs/lx2162aqds_tfa_verified_boot_defconfig index 425c8e6..5d14e31 100644 --- a/configs/lx2162aqds_tfa_verified_boot_defconfig +++ b/configs/lx2162aqds_tfa_verified_boot_defconfig @@ -23,6 +23,7 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_OF_BOARD_FIXUP=y +CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y @@ -58,6 +59,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_ADDR=0x20500000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/malta64_defconfig b/configs/malta64_defconfig index 9e6d8c0..1c1bc4e 100644 --- a/configs/malta64_defconfig +++ b/configs/malta64_defconfig @@ -25,6 +25,10 @@ CONFIG_CMD_DATE=y # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xFFFFFFFFBE3E0000 +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/malta64el_defconfig b/configs/malta64el_defconfig index c44aa7e..756138d 100644 --- a/configs/malta64el_defconfig +++ b/configs/malta64el_defconfig @@ -27,6 +27,10 @@ CONFIG_CMD_DATE=y # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xFFFFFFFFBE3E0000 +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/malta_defconfig b/configs/malta_defconfig index 852e5c0..802cc37 100644 --- a/configs/malta_defconfig +++ b/configs/malta_defconfig @@ -24,6 +24,10 @@ CONFIG_CMD_DATE=y # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xBE3E0000 +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig index b81ab6e..f929fc8 100644 --- a/configs/maltael_defconfig +++ b/configs/maltael_defconfig @@ -26,6 +26,10 @@ CONFIG_CMD_DATE=y # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xBE3E0000 +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/nanopi-k2_defconfig b/configs/nanopi-k2_defconfig index 7452caa..6b2ea3f 100644 --- a/configs/nanopi-k2_defconfig +++ b/configs/nanopi-k2_defconfig @@ -9,6 +9,7 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" nanopi-k2" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig index 7e4e19a..f6a1dcb 100644 --- a/configs/nas220_defconfig +++ b/configs/nas220_defconfig @@ -42,6 +42,10 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 CONFIG_KIRKWOOD_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y diff --git a/configs/net2big_v2_defconfig b/configs/net2big_v2_defconfig index 985f530..f55ca67 100644 --- a/configs/net2big_v2_defconfig +++ b/configs/net2big_v2_defconfig @@ -48,6 +48,7 @@ CONFIG_ENV_ADDR=0x70000 CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/netgear_dgnd3700v2_ram_defconfig b/configs/netgear_dgnd3700v2_ram_defconfig index 89638d3..1a5492e 100644 --- a/configs/netgear_dgnd3700v2_ram_defconfig +++ b/configs/netgear_dgnd3700v2_ram_defconfig @@ -13,6 +13,7 @@ CONFIG_MIPS_CACHE_DISABLE=y # CONFIG_MIPS_BOOT_ENV_LEGACY is not set CONFIG_MIPS_BOOT_FDT=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80100000 CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y diff --git a/configs/netspace_lite_v2_defconfig b/configs/netspace_lite_v2_defconfig index 668f4ea..53ff4e2 100644 --- a/configs/netspace_lite_v2_defconfig +++ b/configs/netspace_lite_v2_defconfig @@ -48,6 +48,7 @@ CONFIG_ENV_ADDR=0x70000 CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=1 CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/netspace_max_v2_defconfig b/configs/netspace_max_v2_defconfig index 25ce3c6..1195cc7 100644 --- a/configs/netspace_max_v2_defconfig +++ b/configs/netspace_max_v2_defconfig @@ -48,6 +48,7 @@ CONFIG_ENV_ADDR=0x70000 CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/netspace_mini_v2_defconfig b/configs/netspace_mini_v2_defconfig index 0c9a303..47ca1bd 100644 --- a/configs/netspace_mini_v2_defconfig +++ b/configs/netspace_mini_v2_defconfig @@ -46,6 +46,7 @@ CONFIG_ENV_ADDR=0x70000 CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=1 CONFIG_BLK=y CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y diff --git a/configs/netspace_v2_defconfig b/configs/netspace_v2_defconfig index 8f662ed..2d920ab 100644 --- a/configs/netspace_v2_defconfig +++ b/configs/netspace_v2_defconfig @@ -48,6 +48,7 @@ CONFIG_ENV_ADDR=0x70000 CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=1 CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig index 46ca3ba..05a6761 100644 --- a/configs/nsa310s_defconfig +++ b/configs/nsa310s_defconfig @@ -43,6 +43,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=1 # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig index 6f93df2..4347871 100644 --- a/configs/odroid-c2_defconfig +++ b/configs/odroid-c2_defconfig @@ -9,6 +9,7 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" odroid-c2" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/odroid-c4_defconfig b/configs/odroid-c4_defconfig index 1ea003f..0003756 100644 --- a/configs/odroid-c4_defconfig +++ b/configs/odroid-c4_defconfig @@ -11,6 +11,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" odroid-c4/hc4" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/odroid-hc4_defconfig b/configs/odroid-hc4_defconfig index d632670..c325b24 100644 --- a/configs/odroid-hc4_defconfig +++ b/configs/odroid-hc4_defconfig @@ -12,6 +12,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" odroid-hc4" CONFIG_DEBUG_UART=y CONFIG_AHCI=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/odroid-n2_defconfig b/configs/odroid-n2_defconfig index a950d93..964b785 100644 --- a/configs/odroid-n2_defconfig +++ b/configs/odroid-n2_defconfig @@ -11,6 +11,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" odroid-n2/n2-plus" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig index c43418a..52f3784 100644 --- a/configs/omap5_uevm_defconfig +++ b/configs/omap5_uevm_defconfig @@ -47,6 +47,7 @@ CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_OMAP_HS=y CONFIG_DM_ETH=y CONFIG_SCSI=y +CONFIG_SCSI_AHCI_PLAT=y CONFIG_CONS_INDEX=3 CONFIG_SYS_NS16550=y CONFIG_USB=y diff --git a/configs/openrd_base_defconfig b/configs/openrd_base_defconfig index 2c5a29c..a2fdafd 100644 --- a/configs/openrd_base_defconfig +++ b/configs/openrd_base_defconfig @@ -43,6 +43,12 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 +CONFIG_SYS_ATA_IDE0_OFFSET=0x2000 +CONFIG_SYS_ATA_IDE1_OFFSET=0x4000 # CONFIG_MMC_HW_PARTITIONING is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/openrd_client_defconfig b/configs/openrd_client_defconfig index b21d41b..208deb4 100644 --- a/configs/openrd_client_defconfig +++ b/configs/openrd_client_defconfig @@ -44,6 +44,12 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 +CONFIG_SYS_ATA_IDE0_OFFSET=0x2000 +CONFIG_SYS_ATA_IDE1_OFFSET=0x4000 # CONFIG_MMC_HW_PARTITIONING is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/openrd_ultimate_defconfig b/configs/openrd_ultimate_defconfig index ceeb621..d7269c4 100644 --- a/configs/openrd_ultimate_defconfig +++ b/configs/openrd_ultimate_defconfig @@ -44,6 +44,12 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 +CONFIG_SYS_ATA_IDE0_OFFSET=0x2000 +CONFIG_SYS_ATA_IDE1_OFFSET=0x4000 # CONFIG_MMC_HW_PARTITIONING is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/p200_defconfig b/configs/p200_defconfig index 9f75552..b59dbb8 100644 --- a/configs/p200_defconfig +++ b/configs/p200_defconfig @@ -9,6 +9,7 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" p200" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/p201_defconfig b/configs/p201_defconfig index 1e07794..39bf996 100644 --- a/configs/p201_defconfig +++ b/configs/p201_defconfig @@ -10,6 +10,7 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" p201" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/p212_defconfig b/configs/p212_defconfig index bca0fa8..e321cd0 100644 --- a/configs/p212_defconfig +++ b/configs/p212_defconfig @@ -10,6 +10,7 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" p212" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y CONFIG_CONSOLE_MUX=y diff --git a/configs/pg_wcom_expu1_defconfig b/configs/pg_wcom_expu1_defconfig index 8238ca8..f92532f 100644 --- a/configs/pg_wcom_expu1_defconfig +++ b/configs/pg_wcom_expu1_defconfig @@ -1,15 +1,15 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_TARGET_PG_WCOM_EXPU1=y -CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y -CONFIG_PG_WCOM_UBOOT_BOOTPACKAGE=y CONFIG_SYS_TEXT_BASE=0x60100000 -CONFIG_PG_WCOM_UBOOT_UPDATE_TEXT_BASE=0x60240000 CONFIG_SYS_MALLOC_LEN=0x1004000 CONFIG_NR_DRAM_BANKS=1 CONFIG_KM_DEF_NETDEV="eth2" CONFIG_KM_COMMON_ETH_INIT=y CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3 +CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y +CONFIG_PG_WCOM_UBOOT_BOOTPACKAGE=y +CONFIG_PG_WCOM_UBOOT_UPDATE_TEXT_BASE=0x60240000 CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_ENV_SIZE=0x4000 @@ -30,8 +30,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" +CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" CONFIG_SILENT_CONSOLE=y @@ -56,6 +56,7 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR=0x60060000 CONFIG_ENV_ADDR_REDUND=0x60040000 +CONFIG_VERSION_VARIABLE=y CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DDR_CLK_FREQ=50000000 @@ -79,7 +80,7 @@ CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_QE_FW_ADDR=0x60020000 +CONFIG_SCSI_AHCI_PLAT=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y -CONFIG_VERSION_VARIABLE=y diff --git a/configs/pg_wcom_expu1_update_defconfig b/configs/pg_wcom_expu1_update_defconfig index 0fd5ebc..1020b68 100644 --- a/configs/pg_wcom_expu1_update_defconfig +++ b/configs/pg_wcom_expu1_update_defconfig @@ -1,14 +1,14 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_TARGET_PG_WCOM_EXPU1=y -CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y -CONFIG_PG_WCOM_UBOOT_UPDATE=y CONFIG_SYS_TEXT_BASE=0x60240000 CONFIG_SYS_MALLOC_LEN=0x1004000 CONFIG_NR_DRAM_BANKS=1 CONFIG_KM_DEF_NETDEV="eth2" CONFIG_KM_COMMON_ETH_INIT=y CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3 +CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y +CONFIG_PG_WCOM_UBOOT_UPDATE=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_ENV_SIZE=0x4000 @@ -28,8 +28,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" +CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" CONFIG_SILENT_CONSOLE=y @@ -54,6 +54,7 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR=0x60220000 CONFIG_ENV_ADDR_REDUND=0x60200000 +CONFIG_VERSION_VARIABLE=y CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DDR_CLK_FREQ=50000000 @@ -77,7 +78,7 @@ CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_QE_FW_ADDR=0x60020000 +CONFIG_SCSI_AHCI_PLAT=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y -CONFIG_VERSION_VARIABLE=y diff --git a/configs/pg_wcom_seli8_defconfig b/configs/pg_wcom_seli8_defconfig index 229535c..1a2ba8c 100644 --- a/configs/pg_wcom_seli8_defconfig +++ b/configs/pg_wcom_seli8_defconfig @@ -1,15 +1,15 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_TARGET_PG_WCOM_SELI8=y -CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y -CONFIG_PG_WCOM_UBOOT_BOOTPACKAGE=y CONFIG_SYS_TEXT_BASE=0x60100000 -CONFIG_PG_WCOM_UBOOT_UPDATE_TEXT_BASE=0x60240000 CONFIG_SYS_MALLOC_LEN=0x1004000 CONFIG_NR_DRAM_BANKS=1 CONFIG_KM_DEF_NETDEV="eth2" CONFIG_KM_COMMON_ETH_INIT=y CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3 +CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y +CONFIG_PG_WCOM_UBOOT_BOOTPACKAGE=y +CONFIG_PG_WCOM_UBOOT_UPDATE_TEXT_BASE=0x60240000 CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_ENV_SIZE=0x4000 @@ -30,8 +30,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" +CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" CONFIG_SILENT_CONSOLE=y @@ -56,6 +56,7 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR=0x60060000 CONFIG_ENV_ADDR_REDUND=0x60040000 +CONFIG_VERSION_VARIABLE=y CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DDR_CLK_FREQ=50000000 @@ -79,7 +80,7 @@ CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_QE_FW_ADDR=0x60020000 +CONFIG_SCSI_AHCI_PLAT=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y -CONFIG_VERSION_VARIABLE=y diff --git a/configs/pg_wcom_seli8_update_defconfig b/configs/pg_wcom_seli8_update_defconfig index fb5b715..3a51d4e 100644 --- a/configs/pg_wcom_seli8_update_defconfig +++ b/configs/pg_wcom_seli8_update_defconfig @@ -1,14 +1,14 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_TARGET_PG_WCOM_SELI8=y -CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y -CONFIG_PG_WCOM_UBOOT_UPDATE=y CONFIG_SYS_TEXT_BASE=0x60240000 CONFIG_SYS_MALLOC_LEN=0x1004000 CONFIG_NR_DRAM_BANKS=1 CONFIG_KM_DEF_NETDEV="eth2" CONFIG_KM_COMMON_ETH_INIT=y CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3 +CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y +CONFIG_PG_WCOM_UBOOT_UPDATE=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_ENV_SIZE=0x4000 @@ -28,8 +28,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" +CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" CONFIG_SILENT_CONSOLE=y @@ -54,6 +54,7 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR=0x60220000 CONFIG_ENV_ADDR_REDUND=0x60200000 +CONFIG_VERSION_VARIABLE=y CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DDR_CLK_FREQ=50000000 @@ -77,7 +78,7 @@ CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_QE_FW_ADDR=0x60020000 +CONFIG_SCSI_AHCI_PLAT=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y -CONFIG_VERSION_VARIABLE=y diff --git a/configs/pico-imx8mq_defconfig b/configs/pico-imx8mq_defconfig index fae9dfd..6f25fd7 100644 --- a/configs/pico-imx8mq_defconfig +++ b/configs/pico-imx8mq_defconfig @@ -19,6 +19,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_IMX_BOOTAUX=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x40480000 CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig index 1cf409c..d05db80 100644 --- a/configs/pogo_v4_defconfig +++ b/configs/pogo_v4_defconfig @@ -57,6 +57,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=1 CONFIG_KIRKWOOD_GPIO=y # CONFIG_MMC_HW_PARTITIONING is not set CONFIG_MVEBU_MMC=y diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index 74beffc..6d1a6ba 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -54,6 +54,11 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_TFTP_TSIZE=y CONFIG_REGMAP=y CONFIG_SYSCON=y +CONFIG_SYS_IDE_MAXDEVICE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_ALT_OFFSET=0 +CONFIG_ATAPI=y CONFIG_CPU=y CONFIG_NVME=y CONFIG_SPL_DM_RTC=y diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index 9181019..b0cf701 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -37,6 +37,11 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_TFTP_TSIZE=y CONFIG_REGMAP=y CONFIG_SYSCON=y +CONFIG_SYS_IDE_MAXDEVICE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_ALT_OFFSET=0 +CONFIG_ATAPI=y CONFIG_CPU=y CONFIG_NVME=y CONFIG_SPI=y diff --git a/configs/r2dplus_defconfig b/configs/r2dplus_defconfig index 9e2036a..8b5c8ff 100644 --- a/configs/r2dplus_defconfig +++ b/configs/r2dplus_defconfig @@ -29,6 +29,14 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xA0040000 CONFIG_DM=y +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_IDE_MAXDEVICE=1 +CONFIG_SYS_ATA_BASE_ADDR=0xb4000000 +CONFIG_SYS_ATA_STRIDE=2 +CONFIG_SYS_ATA_DATA_OFFSET=0x1000 +CONFIG_SYS_ATA_REG_OFFSET=0x1000 +CONFIG_SYS_ATA_ALT_OFFSET=0x800 +CONFIG_IDE_RESET=y CONFIG_CLK=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y diff --git a/configs/r8a77970_eagle_defconfig b/configs/r8a77970_eagle_defconfig index 07a0b09..70b23da 100644 --- a/configs/r8a77970_eagle_defconfig +++ b/configs/r8a77970_eagle_defconfig @@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="r8a77970-eagle-u-boot" CONFIG_SPL_TEXT_BASE=0xe6318000 CONFIG_RCAR_GEN3=y CONFIG_TARGET_EAGLE=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/r8a77980_condor_defconfig b/configs/r8a77980_condor_defconfig index 582d717..194fdde 100644 --- a/configs/r8a77980_condor_defconfig +++ b/configs/r8a77980_condor_defconfig @@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="r8a77980-condor-u-boot" CONFIG_SPL_TEXT_BASE=0xe6318000 CONFIG_RCAR_GEN3=y CONFIG_TARGET_CONDOR=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/r8a77990_ebisu_defconfig b/configs/r8a77990_ebisu_defconfig index 24042da..9470bee 100644 --- a/configs/r8a77990_ebisu_defconfig +++ b/configs/r8a77990_ebisu_defconfig @@ -11,6 +11,7 @@ CONFIG_DEFAULT_DEVICE_TREE="r8a77990-ebisu-u-boot" CONFIG_SPL_TEXT_BASE=0xe6318000 CONFIG_RCAR_GEN3=y CONFIG_TARGET_EBISU=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/r8a77995_draak_defconfig b/configs/r8a77995_draak_defconfig index d5b1b31..ea94d5c 100644 --- a/configs/r8a77995_draak_defconfig +++ b/configs/r8a77995_draak_defconfig @@ -11,6 +11,7 @@ CONFIG_DEFAULT_DEVICE_TREE="r8a77995-draak-u-boot" CONFIG_SPL_TEXT_BASE=0xe6318000 CONFIG_RCAR_GEN3=y CONFIG_TARGET_DRAAK=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/r8a779a0_falcon_defconfig b/configs/r8a779a0_falcon_defconfig index e857da9..32e218b 100644 --- a/configs/r8a779a0_falcon_defconfig +++ b/configs/r8a779a0_falcon_defconfig @@ -14,6 +14,7 @@ CONFIG_TARGET_FALCON=y CONFIG_SYS_CLK_FREQ=16666666 # CONFIG_PSCI_RESET is not set CONFIG_ARMV8_PSCI=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/radxa-zero_defconfig b/configs/radxa-zero_defconfig index a9afb64..6851101 100644 --- a/configs/radxa-zero_defconfig +++ b/configs/radxa-zero_defconfig @@ -10,6 +10,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" radxa-zero" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/rcar3_salvator-x_defconfig b/configs/rcar3_salvator-x_defconfig index 499e56e..f60ddf0 100644 --- a/configs/rcar3_salvator-x_defconfig +++ b/configs/rcar3_salvator-x_defconfig @@ -9,6 +9,7 @@ CONFIG_DEFAULT_DEVICE_TREE="r8a77950-salvator-x-u-boot" CONFIG_SPL_TEXT_BASE=0xe6338000 CONFIG_RCAR_GEN3=y CONFIG_TARGET_SALVATOR_X=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/rcar3_ulcb_defconfig b/configs/rcar3_ulcb_defconfig index dfe0d84..3a5e433 100644 --- a/configs/rcar3_ulcb_defconfig +++ b/configs/rcar3_ulcb_defconfig @@ -11,6 +11,7 @@ CONFIG_DEFAULT_DEVICE_TREE="r8a77950-ulcb-u-boot" CONFIG_SPL_TEXT_BASE=0xe6338000 CONFIG_RCAR_GEN3=y CONFIG_TARGET_ULCB=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/rzg2_beacon_defconfig b/configs/rzg2_beacon_defconfig index 1ae12b1..e6a0d68 100644 --- a/configs/rzg2_beacon_defconfig +++ b/configs/rzg2_beacon_defconfig @@ -10,6 +10,7 @@ CONFIG_RCAR_GEN3=y CONFIG_TARGET_BEACON_RZG2M=y # CONFIG_SPL is not set CONFIG_LTO=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/s400_defconfig b/configs/s400_defconfig index 8483694..56caf01 100644 --- a/configs/s400_defconfig +++ b/configs/s400_defconfig @@ -10,6 +10,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" s400" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig index c9afe4c..d82c180 100644 --- a/configs/sandbox64_defconfig +++ b/configs/sandbox64_defconfig @@ -104,8 +104,16 @@ CONFIG_DEVRES=y CONFIG_DEBUG_DEVRES=y CONFIG_ADC=y CONFIG_ADC_SANDBOX=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_AXI=y CONFIG_AXI_SANDBOX=y +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_BASE_ADDR=0x100 +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=1 +CONFIG_SYS_ATA_ALT_OFFSET=2 +CONFIG_SYS_ATA_IDE0_OFFSET=0 CONFIG_BUTTON=y CONFIG_BUTTON_GPIO=y CONFIG_CLK=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index f852743..68e9582 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -128,8 +128,16 @@ CONFIG_DEBUG_DEVRES=y CONFIG_SIMPLE_PM_BUS=y CONFIG_ADC=y CONFIG_ADC_SANDBOX=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_AXI=y CONFIG_AXI_SANDBOX=y +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_BASE_ADDR=0x100 +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=1 +CONFIG_SYS_ATA_ALT_OFFSET=2 +CONFIG_SYS_ATA_IDE0_OFFSET=0 CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DM_BOOTCOUNT=y CONFIG_DM_BOOTCOUNT_RTC=y @@ -249,6 +257,10 @@ CONFIG_RESET_SCMI=y CONFIG_DM_RNG=y CONFIG_DM_RTC=y CONFIG_RTC_RV8803=y +CONFIG_SCSI=y +CONFIG_SCSI_AHCI_PLAT=y +CONFIG_SYS_SCSI_MAX_SCSI_ID=8 +CONFIG_SYS_SCSI_MAX_LUN=4 CONFIG_SANDBOX_SERIAL=y CONFIG_SMEM=y CONFIG_SANDBOX_SMEM=y diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig index 7bd5d01..d809712 100644 --- a/configs/sandbox_flattree_defconfig +++ b/configs/sandbox_flattree_defconfig @@ -84,6 +84,7 @@ CONFIG_DEVRES=y CONFIG_DEBUG_DEVRES=y CONFIG_ADC=y CONFIG_ADC_SANDBOX=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_AXI=y CONFIG_AXI_SANDBOX=y CONFIG_CLK=y diff --git a/configs/sandbox_noinst_defconfig b/configs/sandbox_noinst_defconfig index 7d872ad..b288ac2 100644 --- a/configs/sandbox_noinst_defconfig +++ b/configs/sandbox_noinst_defconfig @@ -108,8 +108,16 @@ CONFIG_DEBUG_DEVRES=y # CONFIG_SPL_SIMPLE_BUS is not set CONFIG_ADC=y CONFIG_ADC_SANDBOX=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_AXI=y CONFIG_AXI_SANDBOX=y +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_BASE_ADDR=0x100 +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=1 +CONFIG_SYS_ATA_ALT_OFFSET=2 +CONFIG_SYS_ATA_IDE0_OFFSET=0 CONFIG_CLK=y CONFIG_SPL_CLK=y CONFIG_CPU=y diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index 29a8917..cd1ad38 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -110,8 +110,16 @@ CONFIG_DEBUG_DEVRES=y # CONFIG_SPL_SIMPLE_BUS is not set CONFIG_ADC=y CONFIG_ADC_SANDBOX=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_AXI=y CONFIG_AXI_SANDBOX=y +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_BASE_ADDR=0x100 +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=1 +CONFIG_SYS_ATA_ALT_OFFSET=2 +CONFIG_SYS_ATA_IDE0_OFFSET=0 CONFIG_CLK=y CONFIG_SPL_CLK=y CONFIG_CPU=y diff --git a/configs/sei510_defconfig b/configs/sei510_defconfig index 5e2496e..df02fca 100644 --- a/configs/sei510_defconfig +++ b/configs/sei510_defconfig @@ -15,6 +15,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" sei510" # CONFIG_PSCI_RESET is not set CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y diff --git a/configs/sei610_defconfig b/configs/sei610_defconfig index df53c91..ca40240 100644 --- a/configs/sei610_defconfig +++ b/configs/sei610_defconfig @@ -15,6 +15,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" sei610" # CONFIG_PSCI_RESET is not set CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y diff --git a/configs/sfr_nb4-ser_ram_defconfig b/configs/sfr_nb4-ser_ram_defconfig index 4c5bc11..c9c50bd 100644 --- a/configs/sfr_nb4-ser_ram_defconfig +++ b/configs/sfr_nb4-ser_ram_defconfig @@ -14,6 +14,7 @@ CONFIG_MIPS_CACHE_DISABLE=y # CONFIG_MIPS_BOOT_ENV_LEGACY is not set CONFIG_MIPS_BOOT_FDT=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x80100000 CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig index 6e39aa1..0c5031b 100644 --- a/configs/sheevaplug_defconfig +++ b/configs/sheevaplug_defconfig @@ -46,6 +46,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_MVEBU_MMC=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/silinux_ek874_defconfig b/configs/silinux_ek874_defconfig index 894a996..5b01f1e 100644 --- a/configs/silinux_ek874_defconfig +++ b/configs/silinux_ek874_defconfig @@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="r8a774c0-ek874-u-boot" CONFIG_SPL_TEXT_BASE=0xe6318000 CONFIG_RCAR_GEN3=y CONFIG_TARGET_SILINUX_EK874=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/configs/socfpga_agilex_atf_defconfig b/configs/socfpga_agilex_atf_defconfig index 2d342c9..f85953f 100644 --- a/configs/socfpga_agilex_atf_defconfig +++ b/configs/socfpga_agilex_atf_defconfig @@ -13,6 +13,7 @@ CONFIG_SPL_TEXT_BASE=0xFFE00000 CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y CONFIG_IDENT_STRING="socfpga_agilex" CONFIG_SPL_FS_FAT=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x02000000 CONFIG_FIT=y CONFIG_SPL_FIT_SIGNATURE=y diff --git a/configs/socfpga_agilex_defconfig b/configs/socfpga_agilex_defconfig index 3559633..2e116fb 100644 --- a/configs/socfpga_agilex_defconfig +++ b/configs/socfpga_agilex_defconfig @@ -15,6 +15,7 @@ CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y CONFIG_IDENT_STRING="socfpga_agilex" CONFIG_SPL_FS_FAT=y # CONFIG_PSCI_RESET is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x02000000 CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y diff --git a/configs/socfpga_agilex_vab_defconfig b/configs/socfpga_agilex_vab_defconfig index 602272b..b62f509 100644 --- a/configs/socfpga_agilex_vab_defconfig +++ b/configs/socfpga_agilex_vab_defconfig @@ -14,6 +14,7 @@ CONFIG_SOCFPGA_SECURE_VAB_AUTH=y CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y CONFIG_IDENT_STRING="socfpga_agilex" CONFIG_SPL_FS_FAT=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x02000000 CONFIG_FIT=y CONFIG_SPL_FIT_SIGNATURE=y diff --git a/configs/socfpga_n5x_atf_defconfig b/configs/socfpga_n5x_atf_defconfig index fe41fb0..31346fc 100644 --- a/configs/socfpga_n5x_atf_defconfig +++ b/configs/socfpga_n5x_atf_defconfig @@ -13,6 +13,7 @@ CONFIG_SPL_TEXT_BASE=0xFFE00000 CONFIG_TARGET_SOCFPGA_N5X_SOCDK=y CONFIG_IDENT_STRING="socfpga_n5x" CONFIG_SPL_FS_FAT=y +CONFIG_REMAKE_ELF=y CONFIG_FIT=y CONFIG_SPL_FIT_SIGNATURE=y CONFIG_SPL_LOAD_FIT=y diff --git a/configs/socfpga_n5x_defconfig b/configs/socfpga_n5x_defconfig index 6bef8c5..7e7d1cc 100644 --- a/configs/socfpga_n5x_defconfig +++ b/configs/socfpga_n5x_defconfig @@ -13,6 +13,7 @@ CONFIG_TARGET_SOCFPGA_N5X_SOCDK=y CONFIG_IDENT_STRING="socfpga_n5x" CONFIG_SPL_FS_FAT=y # CONFIG_PSCI_RESET is not set +CONFIG_REMAKE_ELF=y CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="earlycon panic=-1 earlyprintk=ttyS0,115200" diff --git a/configs/socfpga_n5x_vab_defconfig b/configs/socfpga_n5x_vab_defconfig index da7057d..cf7bf23 100644 --- a/configs/socfpga_n5x_vab_defconfig +++ b/configs/socfpga_n5x_vab_defconfig @@ -14,6 +14,7 @@ CONFIG_SOCFPGA_SECURE_VAB_AUTH=y CONFIG_TARGET_SOCFPGA_N5X_SOCDK=y CONFIG_IDENT_STRING="socfpga_n5x" CONFIG_SPL_FS_FAT=y +CONFIG_REMAKE_ELF=y CONFIG_FIT=y CONFIG_SPL_FIT_SIGNATURE=y CONFIG_SPL_LOAD_FIT=y diff --git a/configs/socfpga_stratix10_atf_defconfig b/configs/socfpga_stratix10_atf_defconfig index 7b522ca..60e7750 100644 --- a/configs/socfpga_stratix10_atf_defconfig +++ b/configs/socfpga_stratix10_atf_defconfig @@ -13,6 +13,7 @@ CONFIG_SPL_TEXT_BASE=0xFFE00000 CONFIG_TARGET_SOCFPGA_STRATIX10_SOCDK=y CONFIG_IDENT_STRING="socfpga_stratix10" CONFIG_SPL_FS_FAT=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x02000000 CONFIG_FIT=y CONFIG_SPL_FIT_SIGNATURE=y diff --git a/configs/socfpga_stratix10_defconfig b/configs/socfpga_stratix10_defconfig index 0ae73d4..8249a12 100644 --- a/configs/socfpga_stratix10_defconfig +++ b/configs/socfpga_stratix10_defconfig @@ -17,6 +17,7 @@ CONFIG_SPL_FS_FAT=y # CONFIG_PSCI_RESET is not set CONFIG_OPTIMIZE_INLINING=y CONFIG_SPL_OPTIMIZE_INLINING=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x02000000 CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig index 26256c9..6dbf8c2 100644 --- a/configs/syzygy_hub_defconfig +++ b/configs/syzygy_hub_defconfig @@ -15,6 +15,7 @@ CONFIG_ZYNQ_MAC_IN_EEPROM=y CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_CUSTOM_LDSCRIPT=y CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" CONFIG_SYS_LOAD_ADDR=0x0 diff --git a/configs/ten64_tfa_defconfig b/configs/ten64_tfa_defconfig index 8d45b13..dbd9b04 100644 --- a/configs/ten64_tfa_defconfig +++ b/configs/ten64_tfa_defconfig @@ -1,119 +1,99 @@ CONFIG_ARM=y CONFIG_TARGET_TEN64=y +CONFIG_TFABOOT=y CONFIG_SYS_TEXT_BASE=0x82000000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ENV_SIZE=0x80000 +CONFIG_ENV_OFFSET=0x500000 +CONFIG_ENV_SECT_SIZE=0x80000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-ten64" CONFIG_QSPI_AHB_INIT=y -CONFIG_TFABOOT=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y +CONFIG_TEN64_CONTROLLER=y +CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=2 -# CONFIG_SYS_MALLOC_F is not set +CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_FDT_OVERLAY=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_USE_BOOTCOMMAND is not set +CONFIG_LOGLEVEL=7 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_CMD_BOOTEFI_HELLO=y +# CONFIG_ID_EEPROM is not set +CONFIG_PCI_INIT_R=y CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_BOOTMENU=y -CONFIG_CMD_GPT=y -CONFIG_RANDOM_UUID=y -CONFIG_CMD_DM=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_MEMTEST=y -CONFIG_CMD_I2C=y +CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_UBI=y -CONFIG_CMD_UBIFS=y +CONFIG_CMD_MTD=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y -CONFIG_CMD_TIME=y -CONFIG_CMD_POWEROFF=y CONFIG_CMD_WDT=y # CONFIG_CMD_SETEXPR is not set -CONFIG_FS_FAT=y -CONFIG_FAT_WRITE=y -CONFIG_MP=y +CONFIG_CMD_EFIDEBUG=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TPM=y +CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-nand0:8m(reserved),32m(recovery),108m(ubia),108m(ubib);nor1:1m(bl2),2m(bl3),2m(mcfirmware),512k(ubootenv),256k(dpl),256k(dpc),256k(devicetree)" +CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-ten64" -CONFIG_EMC230X=y CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_ENV_OFFSET=0x500000 -CONFIG_ENV_SIZE=0x80000 -CONFIG_ENV_SECT_SIZE=0x80000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SCSI_AHCI=y -CONFIG_DM_MMC=y +CONFIG_AHCI_PCI=y +CONFIG_GPIO_HOG=y +CONFIG_DM_PCA953X=y +CONFIG_MPC8XXX_GPIO=y +CONFIG_DM_I2C=y +CONFIG_MISC=y CONFIG_FSL_ESDHC=y -CONFIG_CMD_FAN=y -CONFIG_FANCONTROL=y +CONFIG_MTD=y CONFIG_DM_MTD=y +CONFIG_MTD_SPI_NAND=y CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_SPI_FLASH_MTD=y +CONFIG_PHYLIB=y +CONFIG_PHY_VITESSE=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y -# CONFIG_ID_EEPROM is not set CONFIG_MII=y +CONFIG_FSL_LS_MDIO=y CONFIG_NVME=y -CONFIG_CMD_PCI=y CONFIG_PCI=y -CONFIG_DM_PCA953X=y -CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE_RC=y +CONFIG_DM_RTC=y +CONFIG_RTC_RX8025=y +CONFIG_DM_SCSI=y CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y CONFIG_FSL_QSPI=y -CONFIG_UBI=y +CONFIG_TPM_ATMEL_TWI=y CONFIG_USB=y -CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_GADGET=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y -CONFIG_DM_I2C=y -CONFIG_DM_GPIO=y -CONFIG_ARM_SMCCC=y -CONFIG_MTD=y -CONFIG_MTD_SPI_NAND=y -CONFIG_CMD_MTD=y -CONFIG_LOGLEVEL=7 -CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-nand0:8m(reserved),32m(recovery),108m(ubia),108m(ubib);nor1:1m(bl2),2m(bl3),2m(mcfirmware),512k(ubootenv),256k(dpl),256k(dpc),256k(devicetree)" -CONFIG_MPC8XXX_GPIO=y -CONFIG_GPIO_HOG=y -CONFIG_DM_RTC=y -CONFIG_RTC_RX8025=y -CONFIG_CMD_NVEDIT_EFI=y -CONFIG_CMD_EFIDEBUG=y -CONFIG_DM_ETH=y -CONFIG_PCI_INIT_R=y -CONFIG_PHYLIB=y -CONFIG_PHY_VITESSE=y -CONFIG_DM_MDIO=y -CONFIG_FSL_LS_MDIO=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_TPM=y -CONFIG_CMD_TPM=y -CONFIG_TPM_ATMEL_TWI=y -CONFIG_MISC=y -CONFIG_USB5744=y -CONFIG_TEN64_CONTROLLER=y -CONFIG_DM_SCSI=y -CONFIG_AHCI=y -CONFIG_AHCI_PCI=y CONFIG_WDT=y CONFIG_WDT_SP805=y +CONFIG_TPM=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/theadorable_debug_defconfig b/configs/theadorable_debug_defconfig index a781f15..1c3dbe4 100644 --- a/configs/theadorable_debug_defconfig +++ b/configs/theadorable_debug_defconfig @@ -54,6 +54,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_SATA_MV=y +CONFIG_SYS_SATA_MAX_DEVICE=1 CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_RAM=y CONFIG_FPGA_ALTERA=y diff --git a/configs/thunderx_88xx_defconfig b/configs/thunderx_88xx_defconfig index 7c6187d..9a23701 100644 --- a/configs/thunderx_88xx_defconfig +++ b/configs/thunderx_88xx_defconfig @@ -9,6 +9,7 @@ CONFIG_DEBUG_UART_BASE=0x87e024000000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" for Cavium Thunder CN88XX ARM v8 Multi-Core" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x500000 CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y diff --git a/configs/tools-only_defconfig b/configs/tools-only_defconfig index 1f8e90a6..054e008 100644 --- a/configs/tools-only_defconfig +++ b/configs/tools-only_defconfig @@ -19,6 +19,7 @@ CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_NET is not set # CONFIG_ACPIGEN is not set +CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_AXI=y CONFIG_AXI_SANDBOX=y CONFIG_SANDBOX_GPIO=y diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig index dfd465c..117a545 100644 --- a/configs/topic_miami_defconfig +++ b/configs/topic_miami_defconfig @@ -17,6 +17,7 @@ CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miami/ps7_regs.txt" CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_CUSTOM_LDSCRIPT=y CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" CONFIG_SYS_LOAD_ADDR=0x0 diff --git a/configs/topic_miamilite_defconfig b/configs/topic_miamilite_defconfig index bf336c7b..ecdbbcb 100644 --- a/configs/topic_miamilite_defconfig +++ b/configs/topic_miamilite_defconfig @@ -17,6 +17,7 @@ CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamilite/ps7_regs.txt" CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_CUSTOM_LDSCRIPT=y CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" CONFIG_SYS_LOAD_ADDR=0x0 diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig index c700ea4..ce6e1e2 100644 --- a/configs/topic_miamiplus_defconfig +++ b/configs/topic_miamiplus_defconfig @@ -17,6 +17,7 @@ CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt" CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_CUSTOM_LDSCRIPT=y CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" CONFIG_SYS_LOAD_ADDR=0x0 diff --git a/configs/total_compute_defconfig b/configs/total_compute_defconfig index 8fafee0..6a37554 100644 --- a/configs/total_compute_defconfig +++ b/configs/total_compute_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_MEMTEST_END=0xff000000 CONFIG_ENV_SIZE=0x2a00000 CONFIG_DEFAULT_DEVICE_TREE="total_compute" CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x90000000 CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_FIT=y diff --git a/configs/u200_defconfig b/configs/u200_defconfig index 7f46dcf..75265eb 100644 --- a/configs/u200_defconfig +++ b/configs/u200_defconfig @@ -10,6 +10,7 @@ CONFIG_DEBUG_UART_BASE=0xff803000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" u200" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/vexpress_aemv8a_juno_defconfig b/configs/vexpress_aemv8a_juno_defconfig index ffadfc0..e02124c 100644 --- a/configs/vexpress_aemv8a_juno_defconfig +++ b/configs/vexpress_aemv8a_juno_defconfig @@ -11,6 +11,7 @@ CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DEFAULT_DEVICE_TREE="juno-r2" CONFIG_IDENT_STRING=" vexpress_aemv8a" CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x90000000 CONFIG_BOOTDELAY=1 CONFIG_USE_BOOTARGS=y diff --git a/configs/vexpress_aemv8a_semi_defconfig b/configs/vexpress_aemv8a_semi_defconfig index 902eb8f..82a5b52 100644 --- a/configs/vexpress_aemv8a_semi_defconfig +++ b/configs/vexpress_aemv8a_semi_defconfig @@ -11,6 +11,7 @@ CONFIG_ENV_SIZE=0x40000 CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_IDENT_STRING=" vexpress_aemv8a" CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x90000000 CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_BOOTDELAY=1 diff --git a/configs/wetek-core2_defconfig b/configs/wetek-core2_defconfig index 006cebc..bb1d481 100644 --- a/configs/wetek-core2_defconfig +++ b/configs/wetek-core2_defconfig @@ -10,6 +10,7 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" wetek-core2" CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/xilinx_versal_mini_defconfig b/configs/xilinx_versal_mini_defconfig index c90899b..79bcbf8 100644 --- a/configs/xilinx_versal_mini_defconfig +++ b/configs/xilinx_versal_mini_defconfig @@ -13,6 +13,7 @@ CONFIG_SYS_MEM_RSVD_FOR_MMU=y CONFIG_COUNTER_FREQUENCY=100000000 # CONFIG_PSCI_RESET is not set # CONFIG_EXPERT is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x8000000 # CONFIG_LEGACY_IMAGE_FORMAT is not set # CONFIG_AUTOBOOT is not set diff --git a/configs/xilinx_versal_mini_emmc0_defconfig b/configs/xilinx_versal_mini_emmc0_defconfig index c897339..b1a90bb 100644 --- a/configs/xilinx_versal_mini_emmc0_defconfig +++ b/configs/xilinx_versal_mini_emmc0_defconfig @@ -10,6 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="versal-mini-emmc0" CONFIG_COUNTER_FREQUENCY=100000000 # CONFIG_PSCI_RESET is not set # CONFIG_EXPERT is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x8000000 # CONFIG_AUTOBOOT is not set CONFIG_USE_BOOTCOMMAND=y diff --git a/configs/xilinx_versal_mini_emmc1_defconfig b/configs/xilinx_versal_mini_emmc1_defconfig index 90bfca7..8f90db4 100644 --- a/configs/xilinx_versal_mini_emmc1_defconfig +++ b/configs/xilinx_versal_mini_emmc1_defconfig @@ -10,6 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="versal-mini-emmc1" CONFIG_COUNTER_FREQUENCY=100000000 # CONFIG_PSCI_RESET is not set # CONFIG_EXPERT is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x8000000 # CONFIG_AUTOBOOT is not set CONFIG_USE_BOOTCOMMAND=y diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig index 28de780..adc30a7 100644 --- a/configs/xilinx_versal_virt_defconfig +++ b/configs/xilinx_versal_virt_defconfig @@ -12,6 +12,7 @@ CONFIG_CMD_FRU=y CONFIG_DEFINE_TCM_OCM_MMAP=y CONFIG_COUNTER_FREQUENCY=100000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x8000000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig index b19a788..6aa4ec4 100644 --- a/configs/xilinx_zynq_virt_defconfig +++ b/configs/xilinx_zynq_virt_defconfig @@ -13,6 +13,7 @@ CONFIG_SPL=y CONFIG_CMD_FRU=y CONFIG_CMD_ZYNQ_AES=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_CUSTOM_LDSCRIPT=y CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" CONFIG_SYS_LOAD_ADDR=0x0 diff --git a/configs/xilinx_zynqmp_mini_defconfig b/configs/xilinx_zynqmp_mini_defconfig index 73f6eee..32a948b 100644 --- a/configs/xilinx_zynqmp_mini_defconfig +++ b/configs/xilinx_zynqmp_mini_defconfig @@ -11,6 +11,7 @@ CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini" CONFIG_SYS_MEM_RSVD_FOR_MMU=y CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x8000000 # CONFIG_LEGACY_IMAGE_FORMAT is not set # CONFIG_AUTOBOOT is not set diff --git a/configs/xilinx_zynqmp_mini_emmc0_defconfig b/configs/xilinx_zynqmp_mini_emmc0_defconfig index ac28eb1..add7ea7 100644 --- a/configs/xilinx_zynqmp_mini_emmc0_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc0_defconfig @@ -12,6 +12,7 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x600 CONFIG_SPL=y CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x8000000 # CONFIG_MP is not set CONFIG_FIT=y diff --git a/configs/xilinx_zynqmp_mini_emmc1_defconfig b/configs/xilinx_zynqmp_mini_emmc1_defconfig index e586790..c807af1 100644 --- a/configs/xilinx_zynqmp_mini_emmc1_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc1_defconfig @@ -12,6 +12,7 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x600 CONFIG_SPL=y CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x8000000 # CONFIG_MP is not set CONFIG_FIT=y diff --git a/configs/xilinx_zynqmp_mini_nand_defconfig b/configs/xilinx_zynqmp_mini_nand_defconfig index ea66035..400cd75 100644 --- a/configs/xilinx_zynqmp_mini_nand_defconfig +++ b/configs/xilinx_zynqmp_mini_nand_defconfig @@ -9,6 +9,7 @@ CONFIG_ENV_SIZE=0x80 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand" CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x8000000 # CONFIG_MP is not set CONFIG_FIT=y diff --git a/configs/xilinx_zynqmp_mini_nand_single_defconfig b/configs/xilinx_zynqmp_mini_nand_single_defconfig index 745863b..81d77c2 100644 --- a/configs/xilinx_zynqmp_mini_nand_single_defconfig +++ b/configs/xilinx_zynqmp_mini_nand_single_defconfig @@ -9,6 +9,7 @@ CONFIG_ENV_SIZE=0x80 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand" CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x8000000 # CONFIG_MP is not set CONFIG_FIT=y diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig index 78c9d29..f9b7d24 100644 --- a/configs/xilinx_zynqmp_mini_qspi_defconfig +++ b/configs/xilinx_zynqmp_mini_qspi_defconfig @@ -14,6 +14,7 @@ CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set # CONFIG_PSCI_RESET is not set # CONFIG_EXPERT is not set +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x8000000 # CONFIG_LEGACY_IMAGE_FORMAT is not set # CONFIG_AUTOBOOT is not set diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 10fee3f..6ea1575 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -21,6 +21,7 @@ CONFIG_ZYNQMP_USB=y CONFIG_ZYNQMP_PSU_INIT_ENABLED=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_LOAD_ADDR=0x8000000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -94,6 +95,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SATA=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_BUTTON=y diff --git a/configs/zynq_cse_nand_defconfig b/configs/zynq_cse_nand_defconfig index 82f3ae6..88e8019 100644 --- a/configs/zynq_cse_nand_defconfig +++ b/configs/zynq_cse_nand_defconfig @@ -12,6 +12,7 @@ CONFIG_ENV_SIZE=0x190 CONFIG_DEFAULT_DEVICE_TREE="zynq-cse-nand" CONFIG_SPL_STACK_R_ADDR=0x200000 CONFIG_SPL=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_CUSTOM_LDSCRIPT=y CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" CONFIG_SYS_LOAD_ADDR=0x0 diff --git a/configs/zynq_cse_nor_defconfig b/configs/zynq_cse_nor_defconfig index b3d1202..4e8661b 100644 --- a/configs/zynq_cse_nor_defconfig +++ b/configs/zynq_cse_nor_defconfig @@ -12,6 +12,7 @@ CONFIG_ENV_SIZE=0x190 CONFIG_DEFAULT_DEVICE_TREE="zynq-cse-nor" CONFIG_SPL_STACK_R_ADDR=0x200000 CONFIG_SPL=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_CUSTOM_LDSCRIPT=y CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" CONFIG_SYS_LOAD_ADDR=0x0 diff --git a/configs/zynq_cse_qspi_defconfig b/configs/zynq_cse_qspi_defconfig index 831382f..924d4b1 100644 --- a/configs/zynq_cse_qspi_defconfig +++ b/configs/zynq_cse_qspi_defconfig @@ -17,6 +17,7 @@ CONFIG_DEBUG_UART_CLOCK=0 # CONFIG_ZYNQ_DDRC_INIT is not set # CONFIG_CMD_ZYNQ is not set CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y CONFIG_SYS_CUSTOM_LDSCRIPT=y CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" CONFIG_SYS_LOAD_ADDR=0x0 diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5639536..ce6907e 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -9,6 +9,7 @@ config AHCI config SATA bool "Support SATA controllers" + depends on BLK select HAVE_BLOCK_DEVICE help This enables support for SATA (Serial Advanced Technology @@ -41,22 +42,14 @@ config AHCI_PCI help Enables support for the PCI-based AHCI controller. +if AHCI + config SPL_AHCI_PCI bool "Support for PCI-based AHCI controller for SPL" depends on SPL depends on SPL_PCI depends on SPL_SATA_SUPPORT && DM_SCSI -config SATA_CEVA - bool "Ceva Sata controller" - depends on AHCI - depends on DM_SCSI - help - This option enables Ceva Sata controller hard IP available on Xilinx - ZynqMP. Support up to 2 external devices. Complient with SATA 3.1 and - AHCI 1.3 specifications with hot-plug detect feature. - - config DWC_AHCI bool "Enable Synopsys DWC AHCI driver support" select SCSI_AHCI @@ -77,16 +70,51 @@ config DWC_AHSATA config DWC_AHSATA_AHCI bool "Enable DWC AHSATA AHCI driver support" depends on DWC_AHSATA - depends on AHCI default y help Enable this option unless you need your private ahci implementation +config MTK_AHCI + bool "Enable Mediatek AHCI driver support" + help + Enable this driver to support Sata devices through + Mediatek AHCI controller (e.g. MT7622). + +config AHCI_MVEBU + bool "Marvell EBU AHCI SATA support" + depends on ARCH_MVEBU || ARCH_OCTEON + select SCSI_AHCI + select DM_SCSI + help + This option enables support for the Marvell EBU SoC's + onboard AHCI SATA. + + If unsure, say N. + +config SUNXI_AHCI + bool "Enable Allwinner SATA driver support" + default y if ARCH_SUNXI + help + Enable this driver to support the SATA controllers found in the + Allwinner A10, A20 and R40 SoCs. + +endif # AHCI + +if SATA + +config SATA_CEVA + bool "Ceva Sata controller" + depends on AHCI + depends on DM_SCSI + help + This option enables Ceva Sata controller hard IP available on Xilinx + ZynqMP. Support up to 2 external devices. Compliant with SATA 3.1 and + AHCI 1.3 specifications with hot-plug detect feature. + config FSL_SATA bool "Enable Freescale SATA controller driver support" select AHCI select LIBATA - depends on BLK help Enable this driver to support the SATA controller found in some Freescale PowerPC SoCs. @@ -95,7 +123,6 @@ config SATA_MV bool "Enable Marvell SATA controller driver support" select AHCI select LIBATA - depends on BLK help Enable this driver to support the SATA controller found in some Marvell SoCs. @@ -104,42 +131,20 @@ config SATA_SIL bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver support" select AHCI select LIBATA - depends on BLK help Enable this driver to support the SIL3131, SIL3132 and SIL3124 SATA controllers. -config SATA_SIL3114 - bool "Enable Silicon Image SIL3114 SATA driver support" - select LIBATA +config SYS_SATA_MAX_DEVICE + int "Maximum number of SATA devices" + depends on !AHCI || FSL_SATA || SATA_MV help - Enable this driver to support the SIL3114 SATA controllers. + Sets the maximum number of SATA devices which can be supported + by U-Boot. -config SUNXI_AHCI - bool "Enable Allwinner SATA driver support" - depends on AHCI - default y if ARCH_SUNXI - help - Enable this driver to support the SATA controllers found in the - Allwinner A10, A20 and R40 SoCs. + This is only partially converted to driver model. See sata_bread() + for example, which shows where the conversion needs to be completed. -config AHCI_MVEBU - bool "Marvell EBU AHCI SATA support" - depends on ARCH_MVEBU || ARCH_OCTEON - depends on AHCI - select SCSI_AHCI - select DM_SCSI - help - This option enables support for the Marvell EBU SoC's - onboard AHCI SATA. - - If unsure, say N. - -config MTK_AHCI - bool "Enable Mediatek AHCI driver support" - depends on AHCI - help - Enable this driver to support Sata devices through - Mediatek AHCI controller (e.g. MT7622). +endif # SATA endmenu diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index cd88131..6e30180 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_LIBATA) += libata.o obj-$(CONFIG_SATA) += sata.o obj-$(CONFIG_SATA_CEVA) += sata_ceva.o obj-$(CONFIG_SATA_MV) += sata_mv.o -obj-$(CONFIG_SATA_SIL3114) += sata_sil3114.o obj-$(CONFIG_SATA_SIL) += sata_sil.o obj-$(CONFIG_SANDBOX) += sata_sandbox.o obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o diff --git a/drivers/ata/sata.c b/drivers/ata/sata.c index 6a38d50..0e6c8cd 100644 --- a/drivers/ata/sata.c +++ b/drivers/ata/sata.c @@ -59,7 +59,6 @@ struct blk_desc *sata_get_dev(int dev) #endif #endif -#ifdef CONFIG_BLK static unsigned long sata_bread(struct udevice *dev, lbaint_t start, lbaint_t blkcnt, void *dst) { @@ -71,19 +70,6 @@ static unsigned long sata_bwrite(struct udevice *dev, lbaint_t start, { return -ENOSYS; } -#else -static unsigned long sata_bread(struct blk_desc *block_dev, lbaint_t start, - lbaint_t blkcnt, void *dst) -{ - return sata_read(block_dev->devnum, start, blkcnt, dst); -} - -static unsigned long sata_bwrite(struct blk_desc *block_dev, lbaint_t start, - lbaint_t blkcnt, const void *buffer) -{ - return sata_write(block_dev->devnum, start, blkcnt, buffer); -} -#endif #ifndef CONFIG_AHCI int __sata_initialize(void) @@ -100,10 +86,6 @@ int __sata_initialize(void) sata_dev_desc[i].lba = 0; sata_dev_desc[i].blksz = 512; sata_dev_desc[i].log2blksz = LOG2(sata_dev_desc[i].blksz); -#ifndef CONFIG_BLK - sata_dev_desc[i].block_read = sata_bread; - sata_dev_desc[i].block_write = sata_bwrite; -#endif rc = init_sata(i); if (!rc) { rc = scan_sata(i); @@ -134,7 +116,6 @@ __weak int __sata_stop(void) int sata_stop(void) __attribute__((weak, alias("__sata_stop"))); #endif -#ifdef CONFIG_BLK static const struct blk_ops sata_blk_ops = { .read = sata_bread, .write = sata_bwrite, @@ -145,11 +126,3 @@ U_BOOT_DRIVER(sata_blk) = { .id = UCLASS_BLK, .ops = &sata_blk_ops, }; -#else -U_BOOT_LEGACY_BLK(sata) = { - .if_typename = "sata", - .if_type = IF_TYPE_SATA, - .max_devs = CONFIG_SYS_SATA_MAX_DEVICE, - .desc = sata_dev_desc, -}; -#endif diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index dda712f..a4f0dae 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -6,7 +6,9 @@ */ #include <common.h> +#include <blk.h> #include <cpu_func.h> +#include <dm.h> #include <log.h> #include <pci.h> #include <command.h> @@ -17,13 +19,8 @@ #include <sata.h> #include <libata.h> #include <sata.h> -#include <linux/delay.h> - -#if CONFIG_IS_ENABLED(BLK) -#include <dm.h> -#include <blk.h> #include <dm/device-internal.h> -#endif +#include <linux/delay.h> #include "sata_sil.h" @@ -480,18 +477,12 @@ static void sil_sata_cmd_flush_cache_ext(struct sil_sata *sata) /* * SATA interface between low level driver and command layer */ -#if !CONFIG_IS_ENABLED(BLK) -ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer) -{ - struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; -#else static ulong sata_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, void *buffer) { struct sil_sata_priv *priv = dev_get_plat(dev); int port_number = priv->port_num; struct sil_sata *sata = priv->sil_sata_desc[port_number]; -#endif ulong rc; if (sata->lba48) @@ -505,18 +496,12 @@ static ulong sata_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, /* * SATA interface between low level driver and command layer */ -#if !CONFIG_IS_ENABLED(BLK) -ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer) -{ - struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; -#else ulong sata_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, const void *buffer) { struct sil_sata_priv *priv = dev_get_plat(dev); int port_number = priv->port_num; struct sil_sata *sata = priv->sil_sata_desc[port_number]; -#endif ulong rc; if (sata->lba48) { @@ -532,14 +517,9 @@ ulong sata_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, return rc; } -#if !CONFIG_IS_ENABLED(BLK) -static int sil_init_sata(int dev) -{ -#else static int sil_init_sata(struct udevice *uc_dev, int dev) { struct sil_sata_priv *priv = dev_get_plat(uc_dev); -#endif struct sil_sata *sata; void *port; u32 tmp; @@ -606,14 +586,9 @@ static int sil_init_sata(struct udevice *uc_dev, int dev) memset((void *)sata, 0, sizeof(struct sil_sata)); /* Save the private struct to block device struct */ -#if !CONFIG_IS_ENABLED(BLK) - sata_dev_desc[dev].priv = (void *)sata; - sata->devno = sata_info.devno; -#else priv->sil_sata_desc[dev] = sata; priv->port_num = dev; sata->devno = uc_dev->parent; -#endif sata->id = dev; sata->port = port; sprintf(sata->name, "SATA#%d", dev); @@ -625,85 +600,11 @@ static int sil_init_sata(struct udevice *uc_dev, int dev) return 0; } -#if !CONFIG_IS_ENABLED(BLK) -/* - * SATA interface between low level driver and command layer - */ -int init_sata(int dev) -{ - static int init_done, idx; - pci_dev_t devno; - u16 word; - - if (init_done == 1 && dev < sata_info.maxport) - goto init_start; - - init_done = 1; - - /* Find PCI device(s) */ - devno = pci_find_devices(supported, idx++); - if (devno == -1) - return 1; - - pci_read_config_word(devno, PCI_DEVICE_ID, &word); - - /* get the port count */ - word &= 0xf; - - sata_info.portbase = 0; - sata_info.maxport = sata_info.portbase + word; - sata_info.devno = devno; - - /* Read out all BARs */ - sata_info.iobase[0] = (ulong)pci_map_bar(devno, - PCI_BASE_ADDRESS_0, PCI_REGION_MEM); - sata_info.iobase[1] = (ulong)pci_map_bar(devno, - PCI_BASE_ADDRESS_2, PCI_REGION_MEM); - - /* mask out the unused bits */ - sata_info.iobase[0] &= 0xffffff80; - sata_info.iobase[1] &= 0xfffffc00; - - /* Enable Bus Mastering and memory region */ - pci_write_config_word(devno, PCI_COMMAND, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); - - /* Check if mem accesses and Bus Mastering are enabled. */ - pci_read_config_word(devno, PCI_COMMAND, &word); - if (!(word & PCI_COMMAND_MEMORY) || - (!(word & PCI_COMMAND_MASTER))) { - printf("Error: Can not enable MEM access or Bus Mastering.\n"); - debug("PCI command: %04x\n", word); - return 1; - } - - /* GPIO off */ - writel(0, (void *)(sata_info.iobase[0] + HOST_FLASH_CMD)); - /* clear global reset & mask interrupts during initialization */ - writel(0, (void *)(sata_info.iobase[0] + HOST_CTRL)); - -init_start: - return sil_init_sata(dev); -} - -int reset_sata(int dev) -{ - return 0; -} - -/* - * SATA interface between low level driver and command layer - */ -int scan_sata(int dev) -{ - struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv; -#else static int scan_sata(struct udevice *blk_dev, int dev) { struct blk_desc *desc = dev_get_uclass_plat(blk_dev); struct sil_sata_priv *priv = dev_get_plat(blk_dev); struct sil_sata *sata = priv->sil_sata_desc[dev]; -#endif unsigned char serial[ATA_ID_SERNO_LEN + 1]; unsigned char firmware[ATA_ID_FW_REV_LEN + 1]; unsigned char product[ATA_ID_PROD_LEN + 1]; @@ -727,16 +628,6 @@ static int scan_sata(struct udevice *blk_dev, int dev) /* Product model */ ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product)); -#if !CONFIG_IS_ENABLED(BLK) - memcpy(sata_dev_desc[dev].product, serial, sizeof(serial)); - memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware)); - memcpy(sata_dev_desc[dev].vendor, product, sizeof(product)); - /* Totoal sectors */ - sata_dev_desc[dev].lba = ata_id_n_sectors(id); -#ifdef CONFIG_LBA48 - sata_dev_desc[dev].lba48 = sata->lba48; -#endif -#else memcpy(desc->product, serial, sizeof(serial)); memcpy(desc->revision, firmware, sizeof(firmware)); memcpy(desc->vendor, product, sizeof(product)); @@ -744,7 +635,6 @@ static int scan_sata(struct udevice *blk_dev, int dev) #ifdef CONFIG_LBA48 desc->lba48 = sata->lba48; #endif -#endif #ifdef DEBUG ata_dump_id(id); @@ -754,7 +644,6 @@ static int scan_sata(struct udevice *blk_dev, int dev) return 0; } -#if CONFIG_IS_ENABLED(BLK) static const struct blk_ops sata_sil_blk_ops = { .read = sata_read, .write = sata_write, @@ -916,4 +805,3 @@ U_BOOT_DRIVER(sil_ahci_pci) = { }; U_BOOT_PCI_DEVICE(sil_ahci_pci, supported); -#endif diff --git a/drivers/ata/sata_sil3114.c b/drivers/ata/sata_sil3114.c deleted file mode 100644 index 4d3a680..0000000 --- a/drivers/ata/sata_sil3114.c +++ /dev/null @@ -1,838 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) Excito Elektronik i SkÃ¥ne AB, All rights reserved. - * Author: Tor Krill <tor@excito.com> - * - * This is a driver for Silicon Image sil3114 sata chip modelled on - * the ata_piix driver - */ - -#include <common.h> -#include <blk.h> -#include <log.h> -#include <part.h> -#include <pci.h> -#include <command.h> -#include <config.h> -#include <asm/byteorder.h> -#include <asm/io.h> -#include <ide.h> -#include <sata.h> -#include <libata.h> -#include <linux/delay.h> -#include "sata_sil3114.h" - -/* Convert sectorsize to wordsize */ -#define ATA_SECTOR_WORDS (ATA_SECT_SIZE/2) - -/* Forwards */ -u8 sil3114_spin_up (int num); -u8 sil3114_spin_down (int num); -static int sata_bus_softreset (int num); -static void sata_identify (int num, int dev); -static u8 check_power_mode (int num); -static void sata_port (struct sata_ioports *ioport); -static void set_Feature_cmd (int num, int dev); -static u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, - unsigned int max, u8 usealtstatus); -static u8 sata_chk_status (struct sata_ioports *ioaddr, u8 usealtstatus); -static void msleep (int count); - -static u32 iobase[6] = { 0, 0, 0, 0, 0, 0}; /* PCI BAR registers for device */ - -static struct sata_port port[CONFIG_SYS_SATA_MAX_DEVICE]; - -static void output_data (struct sata_ioports *ioaddr, u16 * sect_buf, int words) -{ - while (words--) { - __raw_writew (*sect_buf++, (void *)ioaddr->data_addr); - } -} - -static int input_data (struct sata_ioports *ioaddr, u16 * sect_buf, int words) -{ - while (words--) { - *sect_buf++ = __raw_readw ((void *)ioaddr->data_addr); - } - return 0; -} - -static int sata_bus_softreset (int num) -{ - u8 status = 0; - - port[num].dev_mask = 1; - - port[num].ctl_reg = 0x08; /*Default value of control reg */ - writeb (port[num].ctl_reg, port[num].ioaddr.ctl_addr); - udelay(10); - writeb (port[num].ctl_reg | ATA_SRST, port[num].ioaddr.ctl_addr); - udelay(10); - writeb (port[num].ctl_reg, port[num].ioaddr.ctl_addr); - - /* spec mandates ">= 2ms" before checking status. - * We wait 150ms, because that was the magic delay used for - * ATAPI devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - */ - msleep (150); - status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 300, 0); - while ((status & ATA_BUSY)) { - msleep (100); - status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 3, 0); - } - - if (status & ATA_BUSY) { - printf ("ata%u is slow to respond,plz be patient\n", num); - } - - while ((status & ATA_BUSY)) { - msleep (100); - status = sata_chk_status (&port[num].ioaddr, 0); - } - - if (status & ATA_BUSY) { - printf ("ata%u failed to respond : ", num); - printf ("bus reset failed\n"); - port[num].dev_mask = 0; - return 1; - } - return 0; -} - -static void sata_identify (int num, int dev) -{ - u8 cmd = 0, status = 0, devno = num; - u16 iobuf[ATA_SECTOR_WORDS]; - u64 n_sectors = 0; - - memset (iobuf, 0, sizeof (iobuf)); - - if (!(port[num].dev_mask & 0x01)) { - printf ("dev%d is not present on port#%d\n", dev, num); - return; - } - - debug ("port=%d dev=%d\n", num, dev); - - status = 0; - cmd = ATA_CMD_ID_ATA; /*Device Identify Command */ - writeb (cmd, port[num].ioaddr.command_addr); - readb (port[num].ioaddr.altstatus_addr); - udelay(10); - - status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 1000, 0); - if (status & ATA_ERR) { - printf ("\ndevice not responding\n"); - port[num].dev_mask &= ~0x01; - return; - } - - input_data (&port[num].ioaddr, iobuf, ATA_SECTOR_WORDS); - - ata_swap_buf_le16 (iobuf, ATA_SECTOR_WORDS); - - debug ("Specific config: %x\n", iobuf[2]); - - /* we require LBA and DMA support (bits 8 & 9 of word 49) */ - if (!ata_id_has_dma (iobuf) || !ata_id_has_lba (iobuf)) { - debug ("ata%u: no dma/lba\n", num); - } -#ifdef DEBUG - ata_dump_id (iobuf); -#endif - n_sectors = ata_id_n_sectors (iobuf); - - if (n_sectors == 0) { - port[num].dev_mask &= ~0x01; - return; - } - ata_id_c_string (iobuf, (unsigned char *)sata_dev_desc[devno].revision, - ATA_ID_FW_REV, sizeof (sata_dev_desc[devno].revision)); - ata_id_c_string (iobuf, (unsigned char *)sata_dev_desc[devno].vendor, - ATA_ID_PROD, sizeof (sata_dev_desc[devno].vendor)); - ata_id_c_string (iobuf, (unsigned char *)sata_dev_desc[devno].product, - ATA_ID_SERNO, sizeof (sata_dev_desc[devno].product)); - - /* TODO - atm we asume harddisk ie not removable */ - sata_dev_desc[devno].removable = 0; - - sata_dev_desc[devno].lba = (u32) n_sectors; - debug("lba=0x%lx\n", sata_dev_desc[devno].lba); - -#ifdef CONFIG_LBA48 - if (iobuf[83] & (1 << 10)) { - sata_dev_desc[devno].lba48 = 1; - } else { - sata_dev_desc[devno].lba48 = 0; - } -#endif - - /* assuming HD */ - sata_dev_desc[devno].type = DEV_TYPE_HARDDISK; - sata_dev_desc[devno].blksz = ATA_SECT_SIZE; - sata_dev_desc[devno].lun = 0; /* just to fill something in... */ -} - -static void set_Feature_cmd (int num, int dev) -{ - u8 status = 0; - - if (!(port[num].dev_mask & 0x01)) { - debug ("dev%d is not present on port#%d\n", dev, num); - return; - } - - writeb (SETFEATURES_XFER, port[num].ioaddr.feature_addr); - writeb (XFER_PIO_4, port[num].ioaddr.nsect_addr); - writeb (0, port[num].ioaddr.lbal_addr); - writeb (0, port[num].ioaddr.lbam_addr); - writeb (0, port[num].ioaddr.lbah_addr); - - writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr); - writeb (ATA_CMD_SET_FEATURES, port[num].ioaddr.command_addr); - - udelay(50); - msleep (150); - - status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 5000, 0); - if ((status & (ATA_BUSY | ATA_ERR))) { - printf ("Error : status 0x%02x\n", status); - port[num].dev_mask &= ~0x01; - } -} - -u8 sil3114_spin_down (int num) -{ - u8 status = 0; - - debug ("Spin down disk\n"); - - if (!(port[num].dev_mask & 0x01)) { - debug ("Device ata%d is not present\n", num); - return 1; - } - - if ((status = check_power_mode (num)) == 0x00) { - debug ("Already in standby\n"); - return 0; - } - - if (status == 0x01) { - printf ("Failed to check power mode on ata%d\n", num); - return 1; - } - - if (!((status = sata_chk_status (&port[num].ioaddr, 0)) & ATA_DRDY)) { - printf ("Device ata%d not ready\n", num); - return 1; - } - - writeb (0x00, port[num].ioaddr.feature_addr); - - writeb (0x00, port[num].ioaddr.nsect_addr); - writeb (0x00, port[num].ioaddr.lbal_addr); - writeb (0x00, port[num].ioaddr.lbam_addr); - writeb (0x00, port[num].ioaddr.lbah_addr); - - writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr); - writeb (ATA_CMD_STANDBY, port[num].ioaddr.command_addr); - - status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 30000, 0); - if ((status & (ATA_BUSY | ATA_ERR))) { - printf ("Error waiting for disk spin down: status 0x%02x\n", - status); - port[num].dev_mask &= ~0x01; - return 1; - } - return 0; -} - -u8 sil3114_spin_up (int num) -{ - u8 status = 0; - - debug ("Spin up disk\n"); - - if (!(port[num].dev_mask & 0x01)) { - debug ("Device ata%d is not present\n", num); - return 1; - } - - if ((status = check_power_mode (num)) != 0x00) { - if (status == 0x01) { - printf ("Failed to check power mode on ata%d\n", num); - return 1; - } else { - /* should be up and running already */ - return 0; - } - } - - if (!((status = sata_chk_status (&port[num].ioaddr, 0)) & ATA_DRDY)) { - printf ("Device ata%d not ready\n", num); - return 1; - } - - debug ("Stautus of device check: %d\n", status); - - writeb (0x00, port[num].ioaddr.feature_addr); - - writeb (0x00, port[num].ioaddr.nsect_addr); - writeb (0x00, port[num].ioaddr.lbal_addr); - writeb (0x00, port[num].ioaddr.lbam_addr); - writeb (0x00, port[num].ioaddr.lbah_addr); - - writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr); - writeb (ATA_CMD_IDLE, port[num].ioaddr.command_addr); - - status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 30000, 0); - if ((status & (ATA_BUSY | ATA_ERR))) { - printf ("Error waiting for disk spin up: status 0x%02x\n", - status); - port[num].dev_mask &= ~0x01; - return 1; - } - - /* Wait for disk to enter Active state */ - do { - msleep (10); - status = check_power_mode (num); - } while ((status == 0x00) || (status == 0x80)); - - if (status == 0x01) { - printf ("Falied waiting for disk to spin up\n"); - return 1; - } - - return 0; -} - -/* Return value is not the usual here - * 0x00 - Device stand by - * 0x01 - Operation failed - * 0x80 - Device idle - * 0xff - Device active -*/ -static u8 check_power_mode (int num) -{ - u8 status = 0; - u8 res = 0; - if (!(port[num].dev_mask & 0x01)) { - debug ("Device ata%d is not present\n", num); - return 1; - } - - if (!(sata_chk_status (&port[num].ioaddr, 0) & ATA_DRDY)) { - printf ("Device ata%d not ready\n", num); - return 1; - } - - writeb (0, port[num].ioaddr.feature_addr); - writeb (0, port[num].ioaddr.nsect_addr); - writeb (0, port[num].ioaddr.lbal_addr); - writeb (0, port[num].ioaddr.lbam_addr); - writeb (0, port[num].ioaddr.lbah_addr); - - writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr); - writeb (ATA_CMD_CHK_POWER, port[num].ioaddr.command_addr); - - status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 5000, 0); - if ((status & (ATA_BUSY | ATA_ERR))) { - printf - ("Error waiting for check power mode complete : status 0x%02x\n", - status); - port[num].dev_mask &= ~0x01; - return 1; - } - res = readb (port[num].ioaddr.nsect_addr); - debug ("Check powermode: %d\n", res); - return res; - -} - -static void sata_port (struct sata_ioports *ioport) -{ - ioport->data_addr = ioport->cmd_addr + ATA_REG_DATA; - ioport->error_addr = ioport->cmd_addr + ATA_REG_ERR; - ioport->feature_addr = ioport->cmd_addr + ATA_REG_FEATURE; - ioport->nsect_addr = ioport->cmd_addr + ATA_REG_NSECT; - ioport->lbal_addr = ioport->cmd_addr + ATA_REG_LBAL; - ioport->lbam_addr = ioport->cmd_addr + ATA_REG_LBAM; - ioport->lbah_addr = ioport->cmd_addr + ATA_REG_LBAH; - ioport->device_addr = ioport->cmd_addr + ATA_REG_DEVICE; - ioport->status_addr = ioport->cmd_addr + ATA_REG_STATUS; - ioport->command_addr = ioport->cmd_addr + ATA_REG_CMD; -} - -static u8 wait_for_irq (int num, unsigned int max) -{ - - u32 port = iobase[5]; - switch (num) { - case 0: - port += VND_TF_CNST_CH0; - break; - case 1: - port += VND_TF_CNST_CH1; - break; - case 2: - port += VND_TF_CNST_CH2; - break; - case 3: - port += VND_TF_CNST_CH3; - break; - default: - return 1; - } - - do { - if (readl (port) & VND_TF_CNST_INTST) { - break; - } - udelay(1000); - max--; - } while ((max > 0)); - - return (max == 0); -} - -static u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, - unsigned int max, u8 usealtstatus) -{ - u8 status; - - do { - if (!((status = sata_chk_status (ioaddr, usealtstatus)) & bits)) { - break; - } - udelay(1000); - max--; - } while ((status & bits) && (max > 0)); - - return status; -} - -static u8 sata_chk_status (struct sata_ioports *ioaddr, u8 usealtstatus) -{ - if (!usealtstatus) { - return readb (ioaddr->status_addr); - } else { - return readb (ioaddr->altstatus_addr); - } -} - -static void msleep (int count) -{ - int i; - - for (i = 0; i < count; i++) - udelay(1000); -} - -/* Read up to 255 sectors - * - * Returns sectors read -*/ -static u8 do_one_read (int device, ulong block, u8 blkcnt, u16 * buff, - uchar lba48) -{ - - u8 sr = 0; - u8 status; - u64 blknr = (u64) block; - - if (!(sata_chk_status (&port[device].ioaddr, 0) & ATA_DRDY)) { - printf ("Device ata%d not ready\n", device); - return 0; - } - - /* Set up transfer */ -#ifdef CONFIG_LBA48 - if (lba48) { - /* write high bits */ - writeb (0, port[device].ioaddr.nsect_addr); - writeb ((blknr >> 24) & 0xFF, port[device].ioaddr.lbal_addr); - writeb ((blknr >> 32) & 0xFF, port[device].ioaddr.lbam_addr); - writeb ((blknr >> 40) & 0xFF, port[device].ioaddr.lbah_addr); - } -#endif - writeb (blkcnt, port[device].ioaddr.nsect_addr); - writeb (((blknr) >> 0) & 0xFF, port[device].ioaddr.lbal_addr); - writeb ((blknr >> 8) & 0xFF, port[device].ioaddr.lbam_addr); - writeb ((blknr >> 16) & 0xFF, port[device].ioaddr.lbah_addr); - -#ifdef CONFIG_LBA48 - if (lba48) { - writeb (ATA_LBA, port[device].ioaddr.device_addr); - writeb (ATA_CMD_PIO_READ_EXT, port[device].ioaddr.command_addr); - } else -#endif - { - writeb (ATA_LBA | ((blknr >> 24) & 0xF), - port[device].ioaddr.device_addr); - writeb (ATA_CMD_PIO_READ, port[device].ioaddr.command_addr); - } - - status = sata_busy_wait (&port[device].ioaddr, ATA_BUSY, 10000, 1); - - if (status & ATA_BUSY) { - u8 err = 0; - - printf ("Device %d not responding status %d\n", device, status); - err = readb (port[device].ioaddr.error_addr); - printf ("Error reg = 0x%x\n", err); - - return (sr); - } - while (blkcnt--) { - - if (wait_for_irq (device, 500)) { - printf ("ata%u irq failed\n", device); - return sr; - } - - status = sata_chk_status (&port[device].ioaddr, 0); - if (status & ATA_ERR) { - printf ("ata%u error %d\n", device, - readb (port[device].ioaddr.error_addr)); - return sr; - } - /* Read one sector */ - input_data (&port[device].ioaddr, buff, ATA_SECTOR_WORDS); - buff += ATA_SECTOR_WORDS; - sr++; - - } - return sr; -} - -ulong sata_read (int device, ulong block, lbaint_t blkcnt, void *buff) -{ - ulong n = 0, sread; - u16 *buffer = (u16 *) buff; - u8 status = 0; - u64 blknr = (u64) block; - unsigned char lba48 = 0; - -#ifdef CONFIG_LBA48 - if (blknr > 0xfffffff) { - if (!sata_dev_desc[device].lba48) { - printf ("Drive doesn't support 48-bit addressing\n"); - return 0; - } - /* more than 28 bits used, use 48bit mode */ - lba48 = 1; - } -#endif - - while (blkcnt > 0) { - - if (blkcnt > 255) { - sread = 255; - } else { - sread = blkcnt; - } - - status = do_one_read (device, blknr, sread, buffer, lba48); - if (status != sread) { - printf ("Read failed\n"); - return n; - } - - blkcnt -= sread; - blknr += sread; - n += sread; - buffer += sread * ATA_SECTOR_WORDS; - } - return n; -} - -ulong sata_write (int device, ulong block, lbaint_t blkcnt, const void *buff) -{ - ulong n = 0; - u16 *buffer = (u16 *) buff; - unsigned char status = 0, num = 0; - u64 blknr = (u64) block; -#ifdef CONFIG_LBA48 - unsigned char lba48 = 0; - - if (blknr > 0xfffffff) { - if (!sata_dev_desc[device].lba48) { - printf ("Drive doesn't support 48-bit addressing\n"); - return 0; - } - /* more than 28 bits used, use 48bit mode */ - lba48 = 1; - } -#endif - /*Port Number */ - num = device; - - while (blkcnt-- > 0) { - status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500, 0); - if (status & ATA_BUSY) { - printf ("ata%u failed to respond\n", port[num].port_no); - return n; - } -#ifdef CONFIG_LBA48 - if (lba48) { - /* write high bits */ - writeb (0, port[num].ioaddr.nsect_addr); - writeb ((blknr >> 24) & 0xFF, - port[num].ioaddr.lbal_addr); - writeb ((blknr >> 32) & 0xFF, - port[num].ioaddr.lbam_addr); - writeb ((blknr >> 40) & 0xFF, - port[num].ioaddr.lbah_addr); - } -#endif - writeb (1, port[num].ioaddr.nsect_addr); - writeb ((blknr >> 0) & 0xFF, port[num].ioaddr.lbal_addr); - writeb ((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr); - writeb ((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr); -#ifdef CONFIG_LBA48 - if (lba48) { - writeb (ATA_LBA, port[num].ioaddr.device_addr); - writeb (ATA_CMD_PIO_WRITE_EXT, port[num].ioaddr.command_addr); - } else -#endif - { - writeb (ATA_LBA | ((blknr >> 24) & 0xF), - port[num].ioaddr.device_addr); - writeb (ATA_CMD_PIO_WRITE, port[num].ioaddr.command_addr); - } - - msleep (50); - /*may take up to 4 sec */ - status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 4000, 0); - if ((status & (ATA_DRQ | ATA_BUSY | ATA_ERR)) != ATA_DRQ) { - printf ("Error no DRQ dev %d blk %ld: sts 0x%02x\n", - device, (ulong) blknr, status); - return (n); - } - - output_data (&port[num].ioaddr, buffer, ATA_SECTOR_WORDS); - readb (port[num].ioaddr.altstatus_addr); - udelay(50); - - ++n; - ++blknr; - buffer += ATA_SECTOR_WORDS; - } - return n; -} - -/* Driver implementation */ -static u8 sil_get_device_cache_line (pci_dev_t pdev) -{ - u8 cache_line = 0; - pci_read_config_byte (pdev, PCI_CACHE_LINE_SIZE, &cache_line); - return cache_line; -} - -int init_sata (int dev) -{ - static u8 init_done = 0; - static int res = 1; - pci_dev_t devno; - u8 cls = 0; - u16 cmd = 0; - u32 sconf = 0; - - if (init_done) { - return res; - } - - init_done = 1; - - if ((devno = pci_find_device (SIL_VEND_ID, SIL3114_DEVICE_ID, 0)) == -1) { - res = 1; - return res; - } - - /* Read out all BARs, even though we only use MMIO from BAR5 */ - pci_read_config_dword (devno, PCI_BASE_ADDRESS_0, &iobase[0]); - pci_read_config_dword (devno, PCI_BASE_ADDRESS_1, &iobase[1]); - pci_read_config_dword (devno, PCI_BASE_ADDRESS_2, &iobase[2]); - pci_read_config_dword (devno, PCI_BASE_ADDRESS_3, &iobase[3]); - pci_read_config_dword (devno, PCI_BASE_ADDRESS_4, &iobase[4]); - pci_read_config_dword (devno, PCI_BASE_ADDRESS_5, &iobase[5]); - - if ((iobase[0] == 0xFFFFFFFF) || (iobase[1] == 0xFFFFFFFF) || - (iobase[2] == 0xFFFFFFFF) || (iobase[3] == 0xFFFFFFFF) || - (iobase[4] == 0xFFFFFFFF) || (iobase[5] == 0xFFFFFFFF)) { - printf ("Error no base addr for SATA controller\n"); - res = 1; - return res; - } - - /* mask off unused bits */ - iobase[0] &= 0xfffffffc; - iobase[1] &= 0xfffffff8; - iobase[2] &= 0xfffffffc; - iobase[3] &= 0xfffffff8; - iobase[4] &= 0xfffffff0; - iobase[5] &= 0xfffffc00; - - /* from sata_sil in Linux kernel */ - cls = sil_get_device_cache_line (devno); - if (cls) { - cls >>= 3; - cls++; /* cls = (line_size/8)+1 */ - writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH0); - writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH1); - writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH2); - writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH3); - } else { - printf ("Cache line not set. Driver may not function\n"); - } - - /* Enable operation */ - pci_read_config_word (devno, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; - pci_write_config_word (devno, PCI_COMMAND, cmd); - - /* Disable interrupt usage */ - pci_read_config_dword (devno, VND_SYSCONFSTAT, &sconf); - sconf |= (VND_SYSCONFSTAT_CHN_0_INTBLOCK | VND_SYSCONFSTAT_CHN_1_INTBLOCK); - pci_write_config_dword (devno, VND_SYSCONFSTAT, sconf); - - res = 0; - return res; -} - -int reset_sata(int dev) -{ - return 0; -} - -/* Check if device is connected to port */ -int sata_bus_probe (int portno) -{ - u32 port = iobase[5]; - u32 val; - switch (portno) { - case 0: - port += VND_SSTATUS_CH0; - break; - case 1: - port += VND_SSTATUS_CH1; - break; - case 2: - port += VND_SSTATUS_CH2; - break; - case 3: - port += VND_SSTATUS_CH3; - break; - default: - return 0; - } - val = readl (port); - if ((val & SATA_DET_PRES) == SATA_DET_PRES) { - return 1; - } else { - return 0; - } -} - -int sata_phy_reset (int portno) -{ - u32 port = iobase[5]; - u32 val; - switch (portno) { - case 0: - port += VND_SCONTROL_CH0; - break; - case 1: - port += VND_SCONTROL_CH1; - break; - case 2: - port += VND_SCONTROL_CH2; - break; - case 3: - port += VND_SCONTROL_CH3; - break; - default: - return 0; - } - val = readl (port); - writel (val | SATA_SC_DET_RST, port); - msleep (150); - writel (val & ~SATA_SC_DET_RST, port); - return 0; -} - -int scan_sata (int dev) -{ - /* A bit brain dead, but the code has a legacy */ - switch (dev) { - case 0: - port[0].port_no = 0; - port[0].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH0; - port[0].ioaddr.altstatus_addr = port[0].ioaddr.ctl_addr = - (iobase[5] + VND_TF2_CH0) | ATA_PCI_CTL_OFS; - port[0].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH0; - break; -#if (CONFIG_SYS_SATA_MAX_DEVICE >= 1) - case 1: - port[1].port_no = 0; - port[1].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH1; - port[1].ioaddr.altstatus_addr = port[1].ioaddr.ctl_addr = - (iobase[5] + VND_TF2_CH1) | ATA_PCI_CTL_OFS; - port[1].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH1; - break; -#elif (CONFIG_SYS_SATA_MAX_DEVICE >= 2) - case 2: - port[2].port_no = 0; - port[2].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH2; - port[2].ioaddr.altstatus_addr = port[2].ioaddr.ctl_addr = - (iobase[5] + VND_TF2_CH2) | ATA_PCI_CTL_OFS; - port[2].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH2; - break; -#elif (CONFIG_SYS_SATA_MAX_DEVICE >= 3) - case 3: - port[3].port_no = 0; - port[3].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH3; - port[3].ioaddr.altstatus_addr = port[3].ioaddr.ctl_addr = - (iobase[5] + VND_TF2_CH3) | ATA_PCI_CTL_OFS; - port[3].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH3; - break; -#endif - default: - printf ("Tried to scan unknown port: ata%d\n", dev); - return 1; - } - - /* Initialize other registers */ - sata_port (&port[dev].ioaddr); - - /* Check for attached device */ - if (!sata_bus_probe (dev)) { - port[dev].port_state = 0; - debug ("SATA#%d port is not present\n", dev); - } else { - debug ("SATA#%d port is present\n", dev); - if (sata_bus_softreset (dev)) { - /* soft reset failed, try a hard one */ - sata_phy_reset (dev); - if (sata_bus_softreset (dev)) { - port[dev].port_state = 0; - } else { - port[dev].port_state = 1; - } - } else { - port[dev].port_state = 1; - } - } - if (port[dev].port_state == 1) { - /* Probe device and set xfer mode */ - sata_identify (dev, 0); - set_Feature_cmd (dev, 0); - } - - return 0; -} diff --git a/drivers/ata/sata_sil3114.h b/drivers/ata/sata_sil3114.h deleted file mode 100644 index a336eb5..0000000 --- a/drivers/ata/sata_sil3114.h +++ /dev/null @@ -1,133 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) Excito Elektronik i SkÃ¥ne AB, All rights reserved. - * Author: Tor Krill <tor@excito.com> - */ - -#ifndef SATA_SIL3114_H -#define SATA_SIL3114_H - -struct sata_ioports { - unsigned long cmd_addr; - unsigned long data_addr; - unsigned long error_addr; - unsigned long feature_addr; - unsigned long nsect_addr; - unsigned long lbal_addr; - unsigned long lbam_addr; - unsigned long lbah_addr; - unsigned long device_addr; - unsigned long status_addr; - unsigned long command_addr; - unsigned long altstatus_addr; - unsigned long ctl_addr; - unsigned long bmdma_addr; - unsigned long scr_addr; -}; - -struct sata_port { - unsigned char port_no; /* primary=0, secondary=1 */ - struct sata_ioports ioaddr; /* ATA cmd/ctl/dma reg blks */ - unsigned char ctl_reg; - unsigned char last_ctl; - unsigned char port_state; /* 1-port is available and */ - /* 0-port is not available */ - unsigned char dev_mask; -}; - -/* Missing ata defines */ -#define ATA_CMD_STANDBY 0xE2 -#define ATA_CMD_STANDBYNOW1 0xE0 -#define ATA_CMD_IDLE 0xE3 -#define ATA_CMD_IDLEIMMEDIATE 0xE1 - -/* Defines for SIL3114 chip */ - -/* PCI defines */ -#define SIL_VEND_ID 0x1095 -#define SIL3114_DEVICE_ID 0x3114 - -/* some vendor specific registers */ -#define VND_SYSCONFSTAT 0x88 /* System Configuration Status and Command */ -#define VND_SYSCONFSTAT_CHN_0_INTBLOCK (1<<22) -#define VND_SYSCONFSTAT_CHN_1_INTBLOCK (1<<23) -#define VND_SYSCONFSTAT_CHN_2_INTBLOCK (1<<24) -#define VND_SYSCONFSTAT_CHN_3_INTBLOCK (1<<25) - -/* internal registers mapped by BAR5 */ -/* SATA Control*/ -#define VND_SCONTROL_CH0 0x100 -#define VND_SCONTROL_CH1 0x180 -#define VND_SCONTROL_CH2 0x300 -#define VND_SCONTROL_CH3 0x380 - -#define SATA_SC_IPM_T2P (1<<16) -#define SATA_SC_IPM_T2S (2<<16) -#define SATA_SC_SPD_1_5 (1<<4) -#define SATA_SC_SPD_3_0 (2<<4) -#define SATA_SC_DET_RST (1) /* ATA Reset sequence */ -#define SATA_SC_DET_PDIS (4) /* PHY Disable */ - -/* SATA Status */ -#define VND_SSTATUS_CH0 0x104 -#define VND_SSTATUS_CH1 0x184 -#define VND_SSTATUS_CH2 0x304 -#define VND_SSTATUS_CH3 0x384 - -#define SATA_SS_IPM_ACTIVE (1<<8) -#define SATA_SS_IPM_PARTIAL (2<<8) -#define SATA_SS_IPM_SLUMBER (6<<8) -#define SATA_SS_SPD_1_5 (1<<4) -#define SATA_SS_SPD_3_0 (2<<4) -#define SATA_DET_P_NOPHY (1) /* Device presence but no PHY connection established */ -#define SATA_DET_PRES (3) /* Device presence and active PHY */ -#define SATA_DET_OFFLINE (4) /* Device offline or in loopback mode */ - -/* Task file registers in BAR5 mapping */ -#define VND_TF0_CH0 0x80 -#define VND_TF0_CH1 0xc0 -#define VND_TF0_CH2 0x280 -#define VND_TF0_CH3 0x2c0 -#define VND_TF1_CH0 0x88 -#define VND_TF1_CH1 0xc8 -#define VND_TF1_CH2 0x288 -#define VND_TF1_CH3 0x2c8 -#define VND_TF2_CH0 0x88 -#define VND_TF2_CH1 0xc8 -#define VND_TF2_CH2 0x288 -#define VND_TF2_CH3 0x2c8 - -#define VND_BMDMA_CH0 0x00 -#define VND_BMDMA_CH1 0x08 -#define VND_BMDMA_CH2 0x200 -#define VND_BMDMA_CH3 0x208 -#define VND_BMDMA2_CH0 0x10 -#define VND_BMDMA2_CH1 0x18 -#define VND_BMDMA2_CH2 0x210 -#define VND_BMDMA2_CH3 0x218 - -/* FIFO control */ -#define VND_FIFOCFG_CH0 0x40 -#define VND_FIFOCFG_CH1 0x44 -#define VND_FIFOCFG_CH2 0x240 -#define VND_FIFOCFG_CH3 0x244 - -/* Task File configuration and status */ -#define VND_TF_CNST_CH0 0xa0 -#define VND_TF_CNST_CH1 0xe0 -#define VND_TF_CNST_CH2 0x2a0 -#define VND_TF_CNST_CH3 0x2e0 - -#define VND_TF_CNST_BFCMD (1<<1) -#define VND_TF_CNST_CHNRST (1<<2) -#define VND_TF_CNST_VDMA (1<<10) -#define VND_TF_CNST_INTST (1<<11) -#define VND_TF_CNST_WDTO (1<<12) -#define VND_TF_CNST_WDEN (1<<13) -#define VND_TF_CNST_WDIEN (1<<14) - -/* for testing */ -#define VND_SSDR 0x04c /* System Software Data Register */ -#define VND_FMACS 0x050 /* Flash Memory Address control and status */ - -#endif diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 8235430..c54b581 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -102,3 +102,107 @@ config IDE This allows access to raw blocks and filesystems on an IDE drive from U-Boot. See also CMD_IDE which provides an 'ide' command for performing various IDE operations. + +if IDE + +config SYS_IDE_MAXBUS + hex "Maximumm number of IDE buses" + default 2 + help + This is the number of IDE buses provided by the board. Each one + can have one or two devices. One is designated the master and the + other one the slave. It is not required to have one or both on any + controller. + +config SYS_IDE_MAXDEVICE + hex "Maximum number of IDE devices" + default 2 + help + This is the number of IDE devices which can be connected to the + board. Normally this is 2 * CONFIG_SYS_IDE_MAXBUS since up to two + devices can be connected to each bus. The number of devices actually + connected is determined by probing. + +config SYS_ATA_BASE_ADDR + hex "Base address of IDE controller" + default 0 + help + This is the address of the IDE controller, from which other addresses + are calculated. Each bus is at a fixed offset from this address, + so it assumed that they are in the same area of the I/O space or + memory. + +config SYS_ATA_STRIDE + hex "IDE port stride" + default 0x1 + help + This is the distance between each IDE register, in bytes. For an + 8-bit controller this is typically 1, meaning that the registers + appear at consecutive bytes. If the value 2 two, that might indicate + a 16-bit register space. + +config SYS_ATA_DATA_OFFSET + hex "Offset of the data register" + default 0x0 + help + This is the offset of the controller's data register from the base + address of the controller. This is typically 0, but may be something + else if there are some other registers at the start of the + controller space. + +config SYS_ATA_REG_OFFSET + hex "Offset of the register space" + default 0x0 + help + This is the offset of the controller's 'register' space from the base + address of the controller. The data register (which is typically at + offset 0) has its own CONFIG, to deal with controllers where it is + somewhere else. Register 1 will be at this offset + 1, register 2 at + CONFIG_SYS_ATA_REG_OFFSET + 2, etc. + +config SYS_ATA_ALT_OFFSET + hex "Offset of the alternative registers" + default 0x0 + help + This is the offset of the controller's 'alternative' space from the + base address of the controller. This allows these registers to be + located separately from the data and register space. + +config SYS_ATA_IDE0_OFFSET + hex "Offset of bus 0" + default 0x1f0 + help + This is the start offset of bus 0 from the start of the + controller registers. All the other registers are calculated from + this address. using the above options. For x86 hardware this is often + 0x1f0. + +config SYS_ATA_IDE1_OFFSET + hex "Offset of bus 1" + default 0x170 + help + This is the start offset of bus 1 from the start of the + controller registers. All the other registers are calculated from + this address. using the above options. For x86 hardware this is often + 0x170. + +config ATAPI + bool "Enable ATAPI support" + help + This enabled Advanced Technology Attachment Packet Interface (ATAPI), + a protocol that allows a greater variety of devices to be connected + to the IDE port than with plain ATA. It allows SCSI commands to be + sent across the bus, e.g. to support optical drives. + +config IDE_RESET + bool "Support board-specific reset" + help + If this is defined, IDE Reset will be performed by calling the + function: + + ide_set_reset(int reset) + + where reset is 1 to assert reset and 0 to de-assert it. This function + must be defined in a board-specific file. + +endif # IDE diff --git a/drivers/block/ide.c b/drivers/block/ide.c index 085aa35..63c4cfd 100644 --- a/drivers/block/ide.c +++ b/drivers/block/ide.c @@ -676,28 +676,14 @@ __weak void ide_outb(int dev, int port, unsigned char val) debug("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", dev, port, val, ATA_CURR_BASE(dev) + port); -#if defined(CONFIG_IDE_AHB) - if (port) { - /* write command */ - ide_write_register(dev, port, val); - } else { - /* write data */ - outb(val, (ATA_CURR_BASE(dev))); - } -#else outb(val, ATA_CURR_BASE(dev) + port); -#endif } __weak unsigned char ide_inb(int dev, int port) { uchar val; -#if defined(CONFIG_IDE_AHB) - val = ide_read_register(dev, port); -#else val = inb(ATA_CURR_BASE(dev) + port); -#endif debug("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", dev, port, ATA_CURR_BASE(dev) + port, val); @@ -824,9 +810,6 @@ __weak void ide_input_swap_data(int dev, ulong *sect_buf, int words) __weak void ide_output_data(int dev, const ulong *sect_buf, int words) { -#if defined(CONFIG_IDE_AHB) - ide_write_data(dev, sect_buf, words); -#else uintptr_t paddr = (ATA_CURR_BASE(dev) + ATA_DATA_REG); ushort *dbuf; @@ -837,14 +820,10 @@ __weak void ide_output_data(int dev, const ulong *sect_buf, int words) EIEIO; outw(cpu_to_le16(*dbuf++), paddr); } -#endif /* CONFIG_IDE_AHB */ } __weak void ide_input_data(int dev, ulong *sect_buf, int words) { -#if defined(CONFIG_IDE_AHB) - ide_read_data(dev, sect_buf, words); -#else uintptr_t paddr = (ATA_CURR_BASE(dev) + ATA_DATA_REG); ushort *dbuf; @@ -858,7 +837,6 @@ __weak void ide_input_data(int dev, ulong *sect_buf, int words) EIEIO; *dbuf++ = le16_to_cpu(inw(paddr)); } -#endif /* CONFIG_IDE_AHB */ } #ifdef CONFIG_BLK diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c index 9299635..08ea98f 100644 --- a/drivers/mmc/fsl_esdhc_imx.c +++ b/drivers/mmc/fsl_esdhc_imx.c @@ -453,7 +453,7 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc, /* Send the command */ esdhc_write32(®s->cmdarg, cmd->cmdarg); - if IS_ENABLED(CONFIG_FSL_USDHC) { + if (IS_ENABLED(CONFIG_FSL_USDHC)) { u32 mixctrl = esdhc_read32(®s->mixctrl); esdhc_write32(®s->mixctrl, diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 3c826c9..c400e2d 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -16,3 +16,33 @@ config DM_SCSI which supports SCSI and SATA HDDs. For every device configuration (IDs/LUNs) a block device is created with RAW read/write and filesystem support. + +if SCSI && !DM_SCSI + +config SCSI_AHCI_PLAT + bool "Platform-specific init of AHCI" + help + This enables a way for boards to set up an AHCI device manually, by + called ahci_init() and providing an ahci_reset() mechanism. + + This is deprecated. An AHCI driver should be provided instead. + +config SYS_SCSI_MAX_SCSI_ID + int "Maximum supporedt SCSI ID" + default 1 + help + Sets the maximum number of SCSI IDs to scan when looking for devices. + IDs from 0 to (this value - 1) are scanned. + + This is deprecated and is not needed when BLK is enabled. + +config SYS_SCSI_MAX_LUN + int "Maximum support SCSI LUN" + default 1 + help + Sets the maximum number of SCSI Logical Unit Numbers (LUNs) to scan on + devices. LUNs from 0 to (this value - 1) are scanned. + + This is deprecated and is not needed when CONFIG_DM_SCSI is enabled. + +endif diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index e9f8486..25194ee 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -15,4 +15,6 @@ obj-$(CONFIG_SCSI) += scsi.o endif endif +ifdef CONFIG_SCSI obj-$(CONFIG_SANDBOX) += sandbox_scsi.o +endif diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index d93d241..d7b3301 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -46,7 +46,7 @@ static int scsi_max_devs; /* number of highest available scsi device */ static int scsi_curr_dev; /* current device */ -static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE]; +static struct blk_desc scsi_dev_desc[SCSI_MAX_DEVICE]; #endif /* almost the maximum amount of the scsi_ext command.. */ @@ -655,7 +655,7 @@ int scsi_scan(bool verbose) if (verbose) printf("scanning bus for devices...\n"); - for (i = 0; i < CONFIG_SYS_SCSI_MAX_DEVICE; i++) + for (i = 0; i < SCSI_MAX_DEVICE; i++) scsi_init_dev_desc(&scsi_dev_desc[i], i); scsi_max_devs = 0; @@ -703,7 +703,7 @@ U_BOOT_DRIVER(scsi_blk) = { U_BOOT_LEGACY_BLK(scsi) = { .if_typename = "scsi", .if_type = IF_TYPE_SCSI, - .max_devs = CONFIG_SYS_SCSI_MAX_DEVICE, + .max_devs = SCSI_MAX_DEVICE, .desc = scsi_dev_desc, }; #endif diff --git a/include/ata.h b/include/ata.h index 32ad5f6..a7bcee6 100644 --- a/include/ata.h +++ b/include/ata.h @@ -19,9 +19,6 @@ * 8-bit (register) and 16-bit (data) accesses might use different * address spaces. This is implemented by the following definitions. */ -#ifndef CONFIG_SYS_ATA_STRIDE -#define CONFIG_SYS_ATA_STRIDE 1 -#endif #define ATA_IO_DATA(x) (CONFIG_SYS_ATA_DATA_OFFSET+((x) * CONFIG_SYS_ATA_STRIDE)) #define ATA_IO_REG(x) (CONFIG_SYS_ATA_REG_OFFSET +((x) * CONFIG_SYS_ATA_STRIDE)) diff --git a/include/bloblist.h b/include/bloblist.h index 173129b..d0e128a 100644 --- a/include/bloblist.h +++ b/include/bloblist.h @@ -147,16 +147,6 @@ struct bloblist_rec { u32 spare; }; -/* access CONFIG_BLOBLIST_ADDR, dealing with it possibly not being defined */ -static inline ulong bloblist_addr(void) -{ -#ifdef CONFIG_BLOBLIST_FIXED - return CONFIG_BLOBLIST_ADDR; -#else - return 0; -#endif -} - /** * bloblist_check_magic() - return a bloblist if the magic matches * diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 6ba5c52..c27f0a5 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -23,21 +23,8 @@ #ifdef CONFIG_IDE /* ATA */ -# define CONFIG_IDE_RESET 1 # define CONFIG_IDE_PREINIT 1 -# define CONFIG_ATAPI # undef CONFIG_LBA48 - -# define CONFIG_SYS_IDE_MAXBUS 1 -# define CONFIG_SYS_IDE_MAXDEVICE 2 - -# define CONFIG_SYS_ATA_BASE_ADDR (CONFIG_SYS_MBAR2 + 0x800) -# define CONFIG_SYS_ATA_IDE0_OFFSET 0 - -# define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ -# define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ -# define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ -# define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ #endif #define CONFIG_DRIVER_DM9000 diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 977d96a..538d9c2 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -275,7 +275,6 @@ /* * SATA */ -#define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_SATA1 #define CONFIG_SYS_SATA1_OFFSET 0x18000 #define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET) diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 23b9969..106d1e6 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -544,7 +544,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_FSL_SATA_V2 #ifdef CONFIG_FSL_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_SATA1 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index ceaed46..e6d5321 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -349,7 +349,6 @@ #define CONFIG_FSL_SATA_V2 #ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_SATA1 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h index ed88b41..8a0c703 100644 --- a/include/configs/P4080DS.h +++ b/include/configs/P4080DS.h @@ -11,7 +11,6 @@ #define CONFIG_PCIE3 -#define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_LBA48 #define CONFIG_SYS_SRIO diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index f60010f..9433f14 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -438,7 +438,6 @@ /* SATA */ #define CONFIG_FSL_SATA_V2 #ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_SATA1 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index f0bdcba..a41f9f0 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -488,7 +488,6 @@ * SATA */ #ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_SATA1 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 86dc5bf..7165ba0 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -443,7 +443,6 @@ * SATA */ #ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_SATA1 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 6923774..daccd81 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -180,7 +180,6 @@ /* SATA */ #ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_SATA1 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA @@ -466,7 +465,6 @@ /* SATA */ #ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_SATA1 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 9568444..ff0498a 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -48,13 +48,6 @@ #define CONFIG_NET_RETRY_COUNT 10 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ -/* SATA */ -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - /* * Default to using SPI for environment, etc. * 0x000000 - 0x040000 : QSPI.SPL (256KiB) diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h index c2b0d6f..c87bcd4 100644 --- a/include/configs/apalis-imx8.h +++ b/include/configs/apalis-imx8.h @@ -9,8 +9,6 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_REMAKE_ELF - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5b010000 #define USDHC2_BASE_ADDR 0x5b020000 diff --git a/include/configs/apalis-imx8x.h b/include/configs/apalis-imx8x.h index 402fed1..8a6f294 100644 --- a/include/configs/apalis-imx8x.h +++ b/include/configs/apalis-imx8x.h @@ -10,8 +10,6 @@ #include <linux/sizes.h> #include <linux/stringify.h> -#define CONFIG_REMAKE_ELF - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5b010000 #define USDHC2_BASE_ADDR 0x5b020000 diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index 1cde5f7..70689a6 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -32,8 +32,6 @@ #define CONFIG_FACTORYSET -#define CONFIG_REMAKE_ELF - /* ENET Config */ #define CONFIG_FEC_XCV_TYPE RMII diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index d5549f6..ce36b2e 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -28,8 +28,6 @@ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif -#define CONFIG_REMAKE_ELF - /* Flat Device Tree Definitions */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index c9af5a4..871e87c 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -35,15 +35,6 @@ #define CONFIG_PCI_SCAN_SHOW #endif -/* SATA support */ -#ifdef CONFIG_SCSI -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) -#endif - /* Keep device tree and initrd in lower memory so the kernel can access them */ #define RELOCATION_LIMITS_ENV_SETTINGS \ "fdt_high=0x10000000\0" \ diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 40bc821..c19aaac 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -160,7 +160,6 @@ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ /* SATA */ -#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_LBA48 #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index 0118250..008fa6e 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -10,8 +10,6 @@ #include <linux/sizes.h> #include <linux/stringify.h> -#define CONFIG_REMAKE_ELF - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5b010000 #define USDHC2_BASE_ADDR 0x5b020000 diff --git a/include/configs/comtrend_ar5315u.h b/include/configs/comtrend_ar5315u.h index 9f4b4e2..7bfc8bb 100644 --- a/include/configs/comtrend_ar5315u.h +++ b/include/configs/comtrend_ar5315u.h @@ -6,4 +6,3 @@ #include <configs/bmips_common.h> #include <configs/bmips_bcm6318.h> -#define CONFIG_REMAKE_ELF diff --git a/include/configs/comtrend_ar5387un.h b/include/configs/comtrend_ar5387un.h index 888a6d8..36d6a7f 100644 --- a/include/configs/comtrend_ar5387un.h +++ b/include/configs/comtrend_ar5387un.h @@ -6,4 +6,3 @@ #include <configs/bmips_common.h> #include <configs/bmips_bcm6328.h> -#define CONFIG_REMAKE_ELF diff --git a/include/configs/comtrend_ct5361.h b/include/configs/comtrend_ct5361.h index 10e2969..1ac1075 100644 --- a/include/configs/comtrend_ct5361.h +++ b/include/configs/comtrend_ct5361.h @@ -6,4 +6,3 @@ #include <configs/bmips_common.h> #include <configs/bmips_bcm6348.h> -#define CONFIG_REMAKE_ELF diff --git a/include/configs/comtrend_vr3032u.h b/include/configs/comtrend_vr3032u.h index ee29f70..a46b394 100644 --- a/include/configs/comtrend_vr3032u.h +++ b/include/configs/comtrend_vr3032u.h @@ -6,8 +6,6 @@ #include <configs/bmips_common.h> #include <configs/bmips_bcm63268.h> -#define CONFIG_REMAKE_ELF - #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 #endif /* CONFIG_MTD_RAW_NAND */ diff --git a/include/configs/comtrend_wap5813n.h b/include/configs/comtrend_wap5813n.h index f786c46..d9d3128 100644 --- a/include/configs/comtrend_wap5813n.h +++ b/include/configs/comtrend_wap5813n.h @@ -6,4 +6,3 @@ #include <configs/bmips_common.h> #include <configs/bmips_bcm6368.h> -#define CONFIG_REMAKE_ELF diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index ff385d9..7fb96e8 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -18,15 +18,6 @@ * U-Boot into it. */ -/* - * SATA/SCSI/AHCI configuration - */ -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - /* Environment in SPI NOR flash */ #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index d6d679f..23c493b 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -22,14 +22,5 @@ "stderr=serial,vidconsole\0" /* ATA/IDE support */ -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_IDE_MAXDEVICE 4 -#define CONFIG_SYS_ATA_BASE_ADDR 0 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_REG_OFFSET 0 -#define CONFIG_SYS_ATA_ALT_OFFSET 0 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 -#define CONFIG_ATAPI #endif /* __CONFIG_H */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 6d272c6..bd26412 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -347,7 +347,6 @@ /* SATA */ #ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_SATA1 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index 5f26119..8dc73e8 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -13,15 +13,6 @@ /* I2C */ #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE -/* - * SATA/SCSI/AHCI configuration - */ -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - /* Environment in SPI NOR flash */ #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index 449a567..7baae3b 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -28,7 +28,6 @@ #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ /* SATA support */ -#define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_LBA48 /* PCIe support */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index aec30c4..711e37c 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -74,9 +74,6 @@ /* SPI SPL */ -/* SATA */ -#define CONFIG_SCSI_AHCI_PLAT - /* NAND support */ #ifdef CONFIG_MTD_RAW_NAND /* NAND: device related configs */ diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h index 624f611..9f765fa 100644 --- a/include/configs/dragonboard410c.h +++ b/include/configs/dragonboard410c.h @@ -12,7 +12,6 @@ #include <asm/arch/sysmap-apq8016.h> /* Build new ELF image from u-boot.bin (U-Boot + appended DTB) */ -#define CONFIG_REMAKE_ELF /* Physical Memory Map */ #define PHYS_SDRAM_1 0x80000000 diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index beea234..0b3ee13 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -45,7 +45,6 @@ * SATA Driver configuration */ #ifdef CONFIG_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_LBA48 #endif /* CONFIG_SATA */ diff --git a/include/configs/durian.h b/include/configs/durian.h index c0ea42e..f0789d5 100644 --- a/include/configs/durian.h +++ b/include/configs/durian.h @@ -18,13 +18,6 @@ /* PCI CONFIG */ #define CONFIG_PCI_SCAN_SHOW -/* SCSI */ -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE 128 -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SATA_MAX_DEVICE 4 - /* BOOT */ #define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 90e387e..a599722 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -110,20 +110,12 @@ #ifdef CONFIG_IDE #define __io /* Data, registers and alternate blocks are at the same offset */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0100) -#define CONFIG_SYS_ATA_REG_OFFSET (0x0100) -#define CONFIG_SYS_ATA_ALT_OFFSET (0x0100) /* Each 8-bit ATA register is aligned to a 4-bytes address */ -#define CONFIG_SYS_ATA_STRIDE 4 /* Controller supports 48-bits LBA addressing */ #define CONFIG_LBA48 /* A single bus, a single device */ -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* ATA registers base is at SATA controller base */ -#define CONFIG_SYS_ATA_BASE_ADDR ORION5X_SATA_BASE /* ATA bus 0 is orion5x port 1 on ED Mini V2 */ -#define CONFIG_SYS_ATA_IDE0_OFFSET ORION5X_SATA_PORT1_OFFSET /* end of IDE defines */ #endif /* CMD_IDE */ diff --git a/include/configs/efi-x86_payload.h b/include/configs/efi-x86_payload.h index 1cf5c03..59fad4c 100644 --- a/include/configs/efi-x86_payload.h +++ b/include/configs/efi-x86_payload.h @@ -19,14 +19,5 @@ "stderr=serial,vidconsole\0" /* ATA/IDE support */ -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_IDE_MAXDEVICE 4 -#define CONFIG_SYS_ATA_BASE_ADDR 0 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_REG_OFFSET 0 -#define CONFIG_SYS_ATA_ALT_OFFSET 0 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 -#define CONFIG_ATAPI #endif /* __CONFIG_H */ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index bde14a7..402c5bf 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -21,7 +21,6 @@ /* SATA Configs */ #ifdef CONFIG_CMD_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR #define CONFIG_LBA48 diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index c279579..51e671a 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -48,7 +48,6 @@ #endif /* SATA driver configuration */ -#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_LBA48 #endif /* _CONFIG_GOFLEXHOME_H */ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 8f73c3b..668d00c 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -41,7 +41,6 @@ * SATA Configs */ #ifdef CONFIG_CMD_SATA - #define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR #define CONFIG_LBA48 diff --git a/include/configs/helios4.h b/include/configs/helios4.h index de1ebbf..151ab66 100644 --- a/include/configs/helios4.h +++ b/include/configs/helios4.h @@ -35,15 +35,6 @@ #define CONFIG_PCI_SCAN_SHOW #endif -/* SATA support */ -#ifdef CONFIG_SCSI -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) -#endif - /* Keep device tree and initrd in lower memory so the kernel can access them */ #define RELOCATION_LIMITS_ENV_SETTINGS \ "fdt_high=0x10000000\0" \ diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 4ef3a46..55c874b 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -16,12 +16,6 @@ #define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 5 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_RESET_TO_RETRY diff --git a/include/configs/hikey.h b/include/configs/hikey.h index 387971c..c5f9bce 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -15,8 +15,6 @@ #define CONFIG_POWER_HI6553 -#define CONFIG_REMAKE_ELF - #define CONFIG_SYS_BOOTM_LEN SZ_64M /* Physical Memory Map */ diff --git a/include/configs/huawei_hg556a.h b/include/configs/huawei_hg556a.h index 7c88af0..5400d12 100644 --- a/include/configs/huawei_hg556a.h +++ b/include/configs/huawei_hg556a.h @@ -6,4 +6,3 @@ #include <configs/bmips_common.h> #include <configs/bmips_bcm6358.h> -#define CONFIG_REMAKE_ELF diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index 9783fd8..2598dea 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -40,8 +40,6 @@ */ #ifdef CONFIG_IDE #define __io -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET #endif /* CONFIG_IDE */ #endif /* _CONFIG_IB62x0_H */ diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index 2843535..e2e322b 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -29,8 +29,6 @@ #endif /* CONFIG_SPL_BUILD */ -#define CONFIG_REMAKE_ELF - /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index b099004..d3cf7ab 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -30,8 +30,6 @@ #endif -#define CONFIG_REMAKE_ELF - /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 5f587f7..4aaed3a 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -35,8 +35,6 @@ #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 #endif -#define CONFIG_REMAKE_ELF - /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index 1668ca8..16a2c2c 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -29,8 +29,6 @@ #undef CONFIG_DM_MMC #endif -#define CONFIG_REMAKE_ELF - /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index 884d741..c12f383 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -29,8 +29,6 @@ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif -#define CONFIG_REMAKE_ELF - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index 973793f..5fcc963 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -9,7 +9,6 @@ #include <linux/sizes.h> #include <linux/stringify.h> #include <asm/arch/imx-regs.h> -#define CONFIG_REMAKE_ELF #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SPL_BSS_START_ADDR 0x00128000 diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index 3900ef1..b1c51e7 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -27,8 +27,6 @@ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif -#define CONFIG_REMAKE_ELF - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index 6b25b48..7da6802 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -27,8 +27,6 @@ #endif -#define CONFIG_REMAKE_ELF - /* ENET Config */ #if defined(CONFIG_FEC_MXC) #define CONFIG_ETHPRIME "FEC" diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 046f188..0a988e2 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -9,8 +9,6 @@ #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ -#undef CONFIG_SYS_IDE_MAXBUS -#undef CONFIG_SYS_IDE_MAXDEVICE /* * Enable platform initialisation via misc_init_r() function @@ -32,9 +30,6 @@ #define CONFIG_LBA48 #if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \ defined(CONFIG_NET2BIG_V2) -#define CONFIG_SYS_SATA_MAX_DEVICE 2 -#else -#define CONFIG_SYS_SATA_MAX_DEVICE 1 #endif #endif /* CONFIG_SATA */ diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h index bda4283..0263bb8 100644 --- a/include/configs/ls1012a2g5rdb.h +++ b/include/configs/ls1012a2g5rdb.h @@ -14,15 +14,9 @@ #define CONFIG_SYS_SDRAM_SIZE 0x40000000 /* SATA */ -#define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA AHCI_BASE_ADDR -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "verify=no\0" \ diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 5d56100..f92ff17 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -31,15 +31,9 @@ #define CONFIG_SYS_FSL_QSPI_BASE 0x40000000 /* SATA */ -#define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA AHCI_BASE_ADDR -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - /* I2C */ /* GPIO */ diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 7b4044f..2e5b804 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -81,18 +81,12 @@ */ /* SATA */ -#define CONFIG_SCSI_AHCI_PLAT #ifndef PCI_DEVICE_ID_FREESCALE_AHCI #define PCI_DEVICE_ID_FREESCALE_AHCI 0x0440 #endif #define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_FREESCALE, \ PCI_DEVICE_ID_FREESCALE_AHCI} -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - /* SPI */ /* diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index f47bc73..a517346 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -6,8 +6,6 @@ #ifndef __L1028A_COMMON_H #define __L1028A_COMMON_H -#define CONFIG_REMAKE_ELF - #include <asm/arch/stream_id_lsch3.h> #include <asm/arch/config.h> #include <asm/arch/soc.h> diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index 8e3bd77..1b4d181 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -72,13 +72,8 @@ #endif /* SATA */ -#define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) #ifndef SPL_NO_ENV #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index 5ce9ebb..0770f4e 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -57,14 +57,9 @@ #endif /* SATA */ -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) #define SCSI_VEND_ID 0x1b4b #define SCSI_DEV_ID 0x9170 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} -#define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 /* Initial environment variables */ diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 3b4f822..83b95c2 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -26,8 +26,6 @@ #define SPL_NO_IFC #endif -#define CONFIG_REMAKE_ELF - #include <asm/arch/stream_id_lsch2.h> #include <asm/arch/config.h> diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index 5f9cb97..ea6831b 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -46,7 +46,6 @@ #endif /* SATA */ -#define CONFIG_SCSI_AHCI_PLAT /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID @@ -54,11 +53,6 @@ #define CONFIG_SYS_SATA AHCI_BASE_ADDR -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - /* * IFC Definitions */ diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 6d9cbc8..31b578a 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -234,10 +234,6 @@ /* SATA */ #ifndef SPL_NO_SATA -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 -#define CONFIG_SYS_SCSI_MAX_LUN 2 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) #define SCSI_VEND_ID 0x1b4b #define SCSI_DEV_ID 0x9170 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index d07d27d..7552610 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -26,8 +26,6 @@ #define SPL_NO_IFC #endif -#define CONFIG_REMAKE_ELF - #include <asm/arch/config.h> #include <asm/arch/stream_id_lsch2.h> @@ -124,14 +122,7 @@ /* SATA */ #ifndef SPL_NO_SATA -#define CONFIG_SCSI_AHCI_PLAT - #define CONFIG_SYS_SATA AHCI_BASE_ADDR - -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) #endif /* FMan ucode */ diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 2e52108..33b70c8 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -20,8 +20,6 @@ #undef CONFIG_DISPLAY_CPUINFO #endif -#define CONFIG_REMAKE_ELF - #include <asm/arch/stream_id_lsch3.h> #include <asm/arch/config.h> #include <asm/arch/soc.h> @@ -130,13 +128,7 @@ unsigned long long get_qixis_addr(void); /* SATA */ #ifdef CONFIG_SCSI -#define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 - -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) #endif /* Physical Memory Map */ diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index eea6ce5..f2725af 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -7,8 +7,6 @@ #ifndef __LS2_COMMON_H #define __LS2_COMMON_H -#define CONFIG_REMAKE_ELF - #include <asm/arch/stream_id_lsch3.h> #include <asm/arch/config.h> diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 07cf59f..7554de1 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -33,16 +33,10 @@ #endif /* SATA */ -#define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 #define CONFIG_SYS_SATA2 AHCI_BASE_ADDR2 -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) #define CONFIG_SYS_NOR_AMASK_EARLY IFC_AMASK(64*1024*1024) diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 6d8effe..1c05b08 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -43,16 +43,10 @@ #endif /* SATA */ -#define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 #define CONFIG_SYS_SATA2 AHCI_BASE_ADDR2 -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - #if !defined(CONFIG_FSL_QSPI) || defined(CONFIG_TFABOOT) #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index e8e02e7..7fa4f00 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -96,7 +96,6 @@ #endif /* CONFIG_CMD_NET */ #ifdef CONFIG_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_SYS_64BIT_LBA #define CONFIG_LBA48 #endif diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index e285109..e31f8d0 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -10,7 +10,6 @@ #include <asm/arch/config.h> #include <asm/arch/soc.h> -#define CONFIG_REMAKE_ELF #define CONFIG_FSL_MEMAC #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE @@ -110,13 +109,8 @@ /* SATA */ #ifdef CONFIG_SCSI -#define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 #define CONFIG_SYS_SATA2 AHCI_BASE_ADDR2 -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) #endif /* USB */ diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h index 4a1d959..8486cf8 100644 --- a/include/configs/m53menlo.h +++ b/include/configs/m53menlo.h @@ -99,7 +99,6 @@ * SATA */ #ifdef CONFIG_CMD_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR #define CONFIG_LBA48 diff --git a/include/configs/malta.h b/include/configs/malta.h index 61860ee..6d150fd 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -63,12 +63,6 @@ /* * IDE/ATA */ -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 2 -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ISA_IO_BASE_ADDRESS -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01f0 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_REG_OFFSET 0 /* * Commands diff --git a/include/configs/meson64.h b/include/configs/meson64.h index 44f2967..196e58e 100644 --- a/include/configs/meson64.h +++ b/include/configs/meson64.h @@ -29,7 +29,6 @@ #define STDIN_CFG "serial" #endif -#define CONFIG_REMAKE_ELF #define CONFIG_SYS_MAXARGS 32 #define CONFIG_SYS_CBSIZE 1024 diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h index e7f7e77..fd9ce34 100644 --- a/include/configs/mvebu_armada-37xx.h +++ b/include/configs/mvebu_armada-37xx.h @@ -51,15 +51,9 @@ /* * SATA/SCSI/AHCI configuration */ -#define CONFIG_SCSI_AHCI_PLAT #define CONFIG_LBA48 #define CONFIG_SYS_64BIT_LBA -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 0) \ diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h index ac0fddd..44bba65 100644 --- a/include/configs/mvebu_armada-8k.h +++ b/include/configs/mvebu_armada-8k.h @@ -46,15 +46,9 @@ /* * SATA/SCSI/AHCI configuration */ -#define CONFIG_SCSI_AHCI_PLAT #define CONFIG_LBA48 #define CONFIG_SYS_64BIT_LBA -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - /* * PCI configuration */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 92140df..01ed221 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -125,7 +125,6 @@ #define CONFIG_BOARD_SIZE_LIMIT 785408 #ifdef CONFIG_CMD_SATA - #define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR #define CONFIG_LBA48 diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 7d3e651..1c25857 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -18,7 +18,6 @@ /* SATA Configuration */ #ifdef CONFIG_CMD_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR #define CONFIG_LBA48 diff --git a/include/configs/netgear_dgnd3700v2.h b/include/configs/netgear_dgnd3700v2.h index f14316c..c150805 100644 --- a/include/configs/netgear_dgnd3700v2.h +++ b/include/configs/netgear_dgnd3700v2.h @@ -6,4 +6,3 @@ #include <configs/bmips_common.h> #include <configs/bmips_bcm6362.h> -#define CONFIG_REMAKE_ELF diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 1a1c08b..678b433 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -23,7 +23,6 @@ * SATA Configs */ #ifdef CONFIG_CMD_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR #define CONFIG_LBA48 diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index 8cc9ca6..ccf4519 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -32,7 +32,6 @@ /* SATA driver configuration */ #ifdef CONFIG_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_LBA48 #endif /* CONFIG_SATA */ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 188ab0b..75e84c3 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -49,10 +49,4 @@ #define CONSOLEDEV "ttyS2" -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - #endif /* __CONFIG_OMAP5_EVM_H */ diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 43d0896..7dad002 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -59,9 +59,5 @@ /* * SATA Driver configuration */ -#ifdef CONFIG_MVSATA_IDE -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -#endif /*CONFIG_MVSATA_IDE*/ #endif /* _CONFIG_OPENRD_BASE_H */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index b993ec8..92008cd 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -138,7 +138,6 @@ #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ -#define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_LBA48 #define CONFIG_HWCONFIG diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 2293a29..7bfa790 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -29,8 +29,6 @@ #undef CONFIG_DM_MMC #endif -#define CONFIG_REMAKE_ELF - /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) diff --git a/include/configs/pogo_v4.h b/include/configs/pogo_v4.h index 568a936..f8555f6 100644 --- a/include/configs/pogo_v4.h +++ b/include/configs/pogo_v4.h @@ -43,11 +43,6 @@ #endif /* - * SATA Driver configuration - */ -#define CONFIG_SYS_SATA_MAX_DEVICE 1 - -/* * Support large disk for SATA and USB */ #define CONFIG_SYS_64BIT_LBA diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h index 928ccb1..30185b1 100644 --- a/include/configs/presidio_asic.h +++ b/include/configs/presidio_asic.h @@ -8,8 +8,6 @@ #ifndef __PRESIDIO_ASIC_H #define __PRESIDIO_ASIC_H -#define CONFIG_REMAKE_ELF - #define CONFIG_SYS_INIT_SP_ADDR 0x00100000 #define CONFIG_SYS_BOOTM_LEN 0x00c00000 diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h index 52c3360..e9dbd54 100644 --- a/include/configs/qemu-x86.h +++ b/include/configs/qemu-x86.h @@ -33,15 +33,6 @@ * - Only legacy IDE controller is supported for QEMU '-M pc' target * - AHCI controller is supported for QEMU '-M q35' target */ -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_IDE_MAXDEVICE 4 -#define CONFIG_SYS_ATA_BASE_ADDR 0 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_REG_OFFSET 0 -#define CONFIG_SYS_ATA_ALT_OFFSET 0 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 -#define CONFIG_ATAPI #define CONFIG_SPL_BOARD_LOAD_IMAGE diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index e3105fe..04b3481 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -30,19 +30,6 @@ #define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */ /* - * IDE support - */ -#define CONFIG_IDE_RESET 1 -#define CONFIG_SYS_PIO_MODE 1 -#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 -#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000 -#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ - -/* * SuperH PCI Bridge Configration */ #define CONFIG_SH7751_PCI diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index eed2125..07a30d0 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -11,8 +11,6 @@ #include <asm/arch/rmobile.h> -#define CONFIG_REMAKE_ELF - #ifdef CONFIG_SPL #define CONFIG_SPL_TARGET "spl/u-boot-spl.scif" #endif diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 9e0e8c7..75efbf3 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -29,22 +29,4 @@ #define CONFIG_SANDBOX_SDL #endif -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0 -#define CONFIG_SYS_IDE_MAXDEVICE 2 -#define CONFIG_SYS_ATA_BASE_ADDR 0x100 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_REG_OFFSET 1 -#define CONFIG_SYS_ATA_ALT_OFFSET 2 -#define CONFIG_SYS_ATA_STRIDE 4 -#endif - -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_DEVICE 2 -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 8 -#define CONFIG_SYS_SCSI_MAX_LUN 4 - -#define CONFIG_SYS_SATA_MAX_DEVICE 2 - #endif diff --git a/include/configs/sfr_nb4_ser.h b/include/configs/sfr_nb4_ser.h index 7c88af0..5400d12 100644 --- a/include/configs/sfr_nb4_ser.h +++ b/include/configs/sfr_nb4_ser.h @@ -6,4 +6,3 @@ #include <configs/bmips_common.h> #include <configs/bmips_bcm6358.h> -#define CONFIG_REMAKE_ELF diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 8dba4fc..4499a63 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -46,7 +46,6 @@ * SATA driver configuration */ #ifdef CONFIG_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_LBA48 #endif /* CONFIG_SATA */ diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h index 30adfe9..0877646 100644 --- a/include/configs/sifive-unmatched.h +++ b/include/configs/sifive-unmatched.h @@ -32,8 +32,6 @@ #define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 - /* Environment options */ #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index 8646dc2..51dc2e4 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -15,7 +15,6 @@ * U-Boot general configurations */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_REMAKE_ELF /* sysmgr.boot_scratch_cold4 & 5 (64bit) will be used for PSCI_CPU_ON call */ #define CPU_RELEASE_ADDR 0xFFD12210 diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 58ccafc..065b406 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -40,7 +40,6 @@ /* SATA */ #ifdef CONFIG_CMD_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR #define CONFIG_LBA48 diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h index 3c942cc..14817b1 100644 --- a/include/configs/theadorable.h +++ b/include/configs/theadorable.h @@ -41,7 +41,6 @@ "initrd_high=0x10000000\0" /* SATA support */ -#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_LBA48 /* Enable LCD and reserve 512KB from top of memory*/ diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h index 6006898..3d770f8 100644 --- a/include/configs/thunderx_88xx.h +++ b/include/configs/thunderx_88xx.h @@ -6,8 +6,6 @@ #ifndef __THUNDERX_88XX_H__ #define __THUNDERX_88XX_H__ -#define CONFIG_REMAKE_ELF - #define CONFIG_THUNDERX #define CONFIG_SYS_64BIT diff --git a/include/configs/total_compute.h b/include/configs/total_compute.h index 9638ab2..0324b1e 100644 --- a/include/configs/total_compute.h +++ b/include/configs/total_compute.h @@ -9,8 +9,6 @@ #ifndef __TOTAL_COMPUTE_H #define __TOTAL_COMPUTE_H -#define CONFIG_REMAKE_ELF - /* Link Definitions */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) diff --git a/include/configs/vexpress_aemv8.h b/include/configs/vexpress_aemv8.h index 9bf5774..f0c5ceb 100644 --- a/include/configs/vexpress_aemv8.h +++ b/include/configs/vexpress_aemv8.h @@ -9,8 +9,6 @@ #include <linux/stringify.h> -#define CONFIG_REMAKE_ELF - /* Link Definitions */ #ifdef CONFIG_TARGET_VEXPRESS64_JUNO #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 051c18c..80e8fe1 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -17,7 +17,6 @@ /* SATA Configs */ #ifdef CONFIG_CMD_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR #define CONFIG_LBA48 diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index 03539a4..bc72f5f 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -10,8 +10,6 @@ #ifndef __XILINX_VERSAL_H #define __XILINX_VERSAL_H -#define CONFIG_REMAKE_ELF - /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */ /* Generic Interrupt Controller Definitions */ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index f791ab7..e51d92f 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -10,8 +10,6 @@ #ifndef __XILINX_ZYNQMP_H #define __XILINX_ZYNQMP_H -#define CONFIG_REMAKE_ELF - /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */ /* Generic Interrupt Controller Definitions */ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 1bda0a6..780952c 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -9,8 +9,6 @@ #ifndef __CONFIG_ZYNQ_COMMON_H #define __CONFIG_ZYNQ_COMMON_H -#define CONFIG_REMAKE_ELF - /* Cache options */ #ifndef CONFIG_SYS_L2CACHE_OFF # define CONFIG_SYS_L2_PL310 diff --git a/include/ide.h b/include/ide.h index 6073943..2994b7a 100644 --- a/include/ide.h +++ b/include/ide.h @@ -41,13 +41,6 @@ int ide_preinit(void); int ide_device_present(int dev); #endif -#if defined(CONFIG_IDE_AHB) -unsigned char ide_read_register(int dev, unsigned int port); -void ide_write_register(int dev, unsigned int port, unsigned char val); -void ide_read_data(int dev, ulong *sect_buf, int words); -void ide_write_data(int dev, const ulong *sect_buf, int words); -#endif - /* * I/O function overrides */ diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h index a1d1a29..d20da61 100644 --- a/include/linux/kconfig.h +++ b/include/linux/kconfig.h @@ -17,18 +17,16 @@ * the last step cherry picks the 2nd arg, we get a zero. */ #define __ARG_PLACEHOLDER_1 0, -#define config_enabled(cfg) _config_enabled(cfg) -#define _config_enabled(value) __config_enabled(__ARG_PLACEHOLDER_##value) -#define __config_enabled(arg1_or_junk) ___config_enabled(arg1_or_junk 1, 0) +#define config_enabled(cfg, def_val) _config_enabled(cfg, def_val) +#define _config_enabled(value, def_val) __config_enabled(__ARG_PLACEHOLDER_##value, def_val) +#define __config_enabled(arg1_or_junk, def_val) ___config_enabled(arg1_or_junk 1, def_val) #define ___config_enabled(__ignored, val, ...) val /* * IS_ENABLED(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y', * 0 otherwise. - * */ -#define IS_ENABLED(option) \ - (config_enabled(option)) +#define IS_ENABLED(option) config_enabled(option, 0) /* * U-Boot add-on: Helper macros to reference to different macros (prefixed by @@ -60,6 +58,30 @@ #define CONFIG_VAL(option) config_val(option) /* + * This uses a similar mechanism to config_enabled() above. If cfg is enabled, + * it resolves to the value of opt_cfg, otherwise it resolves to def_val + */ +#define config_opt_enabled(cfg, opt_cfg, def_val) _config_opt_enabled(cfg, opt_cfg, def_val) +#define _config_opt_enabled(cfg_val, opt_value, def_val) \ + __config_opt_enabled(__ARG_PLACEHOLDER_##cfg_val, opt_value, def_val) +#define __config_opt_enabled(arg1_or_junk, arg2, def_val) \ + ___config_opt_enabled(arg1_or_junk arg2, def_val) +#define ___config_opt_enabled(__ignored, val, ...) val + +#ifndef __ASSEMBLY__ +/* + * Detect usage of a the value when the conditional is not enabled. When used + * in assembly context, this likely produces a assembly error, or hopefully at + * least something recognisable. + */ +long invalid_use_of_IF_ENABLED_INT(void); +#endif + +/* Evaluates to int_option if option is defined, otherwise a build error */ +#define IF_ENABLED_INT(option, int_option) \ + config_opt_enabled(option, int_option, invalid_use_of_IF_ENABLED_INT()) + +/* * Count number of arguments to a variadic macro. Currently only need * it for 1, 2 or 3 arguments. */ @@ -76,7 +98,7 @@ #define __CONFIG_IS_ENABLED_1(option) __CONFIG_IS_ENABLED_3(option, (1), (0)) #define __CONFIG_IS_ENABLED_2(option, case1) __CONFIG_IS_ENABLED_3(option, case1, ()) #define __CONFIG_IS_ENABLED_3(option, case1, case0) \ - __concat(__unwrap, config_enabled(CONFIG_VAL(option))) (case1, case0) + __concat(__unwrap, config_enabled(CONFIG_VAL(option), 0)) (case1, case0) /* * CONFIG_IS_ENABLED(FOO) expands to @@ -113,5 +135,21 @@ #define CONFIG_IS_ENABLED(option, ...) \ __concat(__CONFIG_IS_ENABLED_, __count_args(option, ##__VA_ARGS__)) (option, ##__VA_ARGS__) +#ifndef __ASSEMBLY__ +/* + * Detect usage of a the value when the conditional is not enabled. When used + * in assembly context, this likely produces a assembly error, or hopefully at + * least something recognisable. + */ +long invalid_use_of_CONFIG_IF_ENABLED_INT(void); +#endif + +/* + * Evaluates to SPL_/TPL_int_option if SPL_/TPL_/option is not defined, + * otherwise build error + */ +#define CONFIG_IF_ENABLED_INT(option, int_option) \ + CONFIG_IS_ENABLED(option, (CONFIG_VAL(int_option)), \ + (invalid_use_of_CONFIG_IF_ENABLED_INT())) #endif /* __LINUX_KCONFIG_H */ diff --git a/include/scsi.h b/include/scsi.h index 66a2caa..b47c746 100644 --- a/include/scsi.h +++ b/include/scsi.h @@ -9,6 +9,10 @@ #include <asm/cache.h> #include <linux/dma-direction.h> +/* Fix this to the maximum */ +#define SCSI_MAX_DEVICE \ + (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) + struct udevice; struct scsi_cmd { diff --git a/scripts/Makefile.autoconf b/scripts/Makefile.autoconf index 5ed9abc..0b3ffa0 100644 --- a/scripts/Makefile.autoconf +++ b/scripts/Makefile.autoconf @@ -68,7 +68,7 @@ quiet_cmd_u_boot_cfg = CFG $@ cmd_u_boot_cfg = \ $(CPP) $(c_flags) $2 -DDO_DEPS_ONLY -dM $(srctree)/include/common.h > $@.tmp && { \ grep 'define CONFIG_' $@.tmp | \ - sed '/define CONFIG_IS_ENABLED(/d;/define CONFIG_VAL(/d;' > $@; \ + sed '/define CONFIG_IS_ENABLED(/d;/define CONFIG_IF_ENABLED_INT(/d;/define CONFIG_VAL(/d;' > $@; \ rm $@.tmp; \ } || { \ rm $@.tmp; false; \ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 7b45d57..6b21e39 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -21,7 +21,6 @@ CONFIG_AT91SAM9M10G45EK CONFIG_AT91_GPIO_PULLUP CONFIG_AT91_LED CONFIG_AT91_WANTS_COMMON_PHY -CONFIG_ATAPI CONFIG_ATMEL_LCD CONFIG_ATMEL_LCD_BGR555 CONFIG_ATMEL_LCD_RGB565 @@ -440,7 +439,6 @@ CONFIG_I2C_RTC_ADDR CONFIG_ICACHE CONFIG_ICS307_REFCLK_HZ CONFIG_IDE_PREINIT -CONFIG_IDE_RESET CONFIG_IMX CONFIG_IMX6_PWM_PER_CLK CONFIG_IMX_HDMI @@ -683,7 +681,6 @@ CONFIG_RAMDISK_ADDR CONFIG_RAMDISK_BOOT CONFIG_RD_LVL CONFIG_RED_LED -CONFIG_REMAKE_ELF CONFIG_RESERVED_01_BASE CONFIG_RESERVED_02_BASE CONFIG_RESERVED_03_BASE @@ -725,7 +722,6 @@ CONFIG_SAR_REG CONFIG_SATA1 CONFIG_SATA2 CONFIG_SCIF_A -CONFIG_SCSI_AHCI_PLAT CONFIG_SCSI_DEV_LIST CONFIG_SC_TIMER_CLK CONFIG_SDCARD @@ -844,13 +840,6 @@ CONFIG_SYS_AT91_MAIN_CLOCK CONFIG_SYS_AT91_PLLA CONFIG_SYS_AT91_PLLB CONFIG_SYS_AT91_SLOW_CLOCK -CONFIG_SYS_ATA_ALT_OFFSET -CONFIG_SYS_ATA_BASE_ADDR -CONFIG_SYS_ATA_DATA_OFFSET -CONFIG_SYS_ATA_IDE0_OFFSET -CONFIG_SYS_ATA_IDE1_OFFSET -CONFIG_SYS_ATA_REG_OFFSET -CONFIG_SYS_ATA_STRIDE CONFIG_SYS_AUTOLOAD CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION CONFIG_SYS_AUXCORE_BOOTDATA @@ -1416,8 +1405,6 @@ CONFIG_SYS_I2C_RTC_ADDR CONFIG_SYS_I2C_TCA642X_ADDR CONFIG_SYS_I2C_TCA642X_BUS_NUM CONFIG_SYS_ICACHE_INV -CONFIG_SYS_IDE_MAXBUS -CONFIG_SYS_IDE_MAXDEVICE CONFIG_SYS_IFC_ADDR CONFIG_SYS_IFC_CCR CONFIG_SYS_INIT_DBCR @@ -1800,7 +1787,6 @@ CONFIG_SYS_PIOC_PDR_VAL1 CONFIG_SYS_PIOC_PPUDR_VAL CONFIG_SYS_PIOD_PDR_VAL1 CONFIG_SYS_PIOD_PPUDR_VAL -CONFIG_SYS_PIO_MODE CONFIG_SYS_PJPAR CONFIG_SYS_PL310_BASE CONFIG_SYS_PLLAR_VAL @@ -1859,7 +1845,6 @@ CONFIG_SYS_SATA2 CONFIG_SYS_SATA2_FLAGS CONFIG_SYS_SATA2_OFFSET CONFIG_SYS_SATA_FAT_BOOT_PARTITION -CONFIG_SYS_SATA_MAX_DEVICE CONFIG_SYS_SBFHDR_DATA_OFFSET CONFIG_SYS_SBFHDR_SIZE CONFIG_SYS_SCCR_SATACM @@ -1867,9 +1852,6 @@ CONFIG_SYS_SCCR_TSEC1CM CONFIG_SYS_SCCR_TSEC2CM CONFIG_SYS_SCCR_USBDRCM CONFIG_SYS_SCR -CONFIG_SYS_SCSI_MAX_DEVICE -CONFIG_SYS_SCSI_MAX_LUN -CONFIG_SYS_SCSI_MAX_SCSI_ID CONFIG_SYS_SDRAM CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0 diff --git a/scripts/pylint.base b/scripts/pylint.base index 8c650f2..cf62931 100644 --- a/scripts/pylint.base +++ b/scripts/pylint.base @@ -1,5 +1,5 @@ -test_conftest.py 6.43 -test_multiplexed_log.py 7.20 +test_conftest.py 6.56 +test_multiplexed_log.py 7.49 test_test.py 8.18 test_tests_test_000_version.py 7.50 test_tests_test_android_test_ab.py 6.50 @@ -10,40 +10,41 @@ test_tests_test_button.py 3.33 test_tests_test_dfu.py 5.45 test_tests_test_dm.py 9.52 test_tests_test_efi_capsule_capsule_defs.py 5.00 -test_tests_test_efi_capsule_conftest.py 1.25 +test_tests_test_efi_capsule_conftest.py 1.88 test_tests_test_efi_capsule_test_capsule_firmware.py 3.89 -test_tests_test_efi_fit.py 7.59 +test_tests_test_efi_fit.py 8.16 test_tests_test_efi_loader.py 7.38 -test_tests_test_efi_secboot_conftest.py -3.84 +test_tests_test_efi_secboot_conftest.py -3.29 test_tests_test_efi_secboot_defs.py 6.67 test_tests_test_efi_secboot_test_authvar.py 8.93 test_tests_test_efi_secboot_test_signed.py 8.38 test_tests_test_efi_secboot_test_signed_intca.py 8.10 test_tests_test_efi_secboot_test_unsigned.py 8.00 test_tests_test_efi_selftest.py 6.36 -test_tests_test_env.py 7.08 +test_tests_test_env.py 7.15 test_tests_test_extension.py 2.14 -test_tests_test_fit.py 6.20 -test_tests_test_fit_ecdsa.py 7.50 +test_tests_test_fit.py 6.83 +test_tests_test_fit_ecdsa.py 5.74 test_tests_test_fit_hashes.py 7.70 test_tests_test_fpga.py 1.81 -test_tests_test_fs_conftest.py 4.62 +test_tests_test_fs_conftest.py 5.13 test_tests_test_fs_fstest_defs.py 8.33 test_tests_test_fs_fstest_helpers.py 4.29 -test_tests_test_fs_test_basic.py 0.40 -test_tests_test_fs_test_ext.py -0.25 +test_tests_test_fs_test_basic.py 0.60 +test_tests_test_fs_test_ext.py 0.00 test_tests_test_fs_test_fs_cmd.py 8.00 test_tests_test_fs_test_mkdir.py 1.96 -test_tests_test_fs_test_squashfs_sqfs_common.py 8.12 -test_tests_test_fs_test_squashfs_test_sqfs_load.py 7.12 +test_tests_test_fs_test_squashfs_sqfs_common.py 8.41 +test_tests_test_fs_test_squashfs_test_sqfs_load.py 7.46 test_tests_test_fs_test_squashfs_test_sqfs_ls.py 8.00 -test_tests_test_fs_test_symlink.py 0.82 -test_tests_test_fs_test_unlink.py 2.22 +test_tests_test_fs_test_symlink.py 1.22 +test_tests_test_fs_test_unlink.py 2.78 test_tests_test_gpio.py 6.09 test_tests_test_gpt.py 7.67 test_tests_test_handoff.py 5.00 test_tests_test_help.py 5.00 test_tests_test_hush_if_test.py 9.27 +test_tests_test_kconfig.py 5.00 test_tests_test_log.py 8.64 test_tests_test_lsblk.py 8.00 test_tests_test_md.py 3.64 @@ -57,7 +58,7 @@ test_tests_test_pstore.py 2.31 test_tests_test_qfw.py 8.75 test_tests_test_sandbox_exit.py 6.50 test_tests_test_scp03.py 3.33 -test_tests_test_sf.py 7.02 +test_tests_test_sf.py 7.13 test_tests_test_shell_basics.py 9.58 test_tests_test_sleep.py 7.78 test_tests_test_spl.py 2.22 @@ -66,32 +67,32 @@ test_tests_test_tpm2.py 8.51 test_tests_test_ums.py 6.32 test_tests_test_unknown_cmd.py 5.00 test_tests_test_ut.py 7.06 -test_tests_test_vboot.py 6.00 +test_tests_test_vboot.py 6.08 test_tests_vboot_evil.py 8.95 test_tests_vboot_forge.py 9.22 -test_u_boot_console_base.py 6.80 -test_u_boot_console_exec_attach.py 8.85 -test_u_boot_console_sandbox.py 7.22 -test_u_boot_spawn.py 7.39 -test_u_boot_utils.py 6.25 +test_u_boot_console_base.py 7.08 +test_u_boot_console_exec_attach.py 9.23 +test_u_boot_console_sandbox.py 8.06 +test_u_boot_spawn.py 7.65 +test_u_boot_utils.py 6.94 tools_binman_bintool 8.59 tools_binman_bintool_test 9.87 tools_binman_btool__testing 6.09 -tools_binman_btool_cbfstool 7.39 +tools_binman_btool_cbfstool 7.83 tools_binman_btool_fiptool 7.62 -tools_binman_btool_futility 6.96 -tools_binman_btool_ifwitool 3.33 -tools_binman_btool_lz4 5.93 -tools_binman_btool_lzma_alone 6.67 -tools_binman_btool_mkimage 6.79 -tools_binman_cbfs_util 7.77 -tools_binman_cbfs_util_test 9.27 +tools_binman_btool_futility 7.39 +tools_binman_btool_ifwitool 3.81 +tools_binman_btool_lz4 6.30 +tools_binman_btool_lzma_alone 6.97 +tools_binman_btool_mkimage 7.86 +tools_binman_cbfs_util 8.46 +tools_binman_cbfs_util_test 9.38 tools_binman_cmdline 9.03 -tools_binman_comp_util 6.25 -tools_binman_control 4.60 -tools_binman_elf 6.42 +tools_binman_comp_util 6.88 +tools_binman_control 5.01 +tools_binman_elf 6.10 tools_binman_elf_test 5.41 -tools_binman_entry 2.48 +tools_binman_entry 3.36 tools_binman_entry_test 5.34 tools_binman_etype__testing 0.83 tools_binman_etype_atf_bl31 -6.00 @@ -103,15 +104,15 @@ tools_binman_etype_blob_ext_list 0.00 tools_binman_etype_blob_named_by_arg -7.78 tools_binman_etype_blob_phase -5.00 tools_binman_etype_cbfs -1.44 -tools_binman_etype_collection 2.33 +tools_binman_etype_collection 2.67 tools_binman_etype_cros_ec_rw -6.00 -tools_binman_etype_fdtmap -3.61 +tools_binman_etype_fdtmap -3.28 tools_binman_etype_files -7.43 tools_binman_etype_fill -6.43 -tools_binman_etype_fit 5.18 -tools_binman_etype_fmap -0.59 +tools_binman_etype_fit 5.26 +tools_binman_etype_fmap -0.29 tools_binman_etype_gbb 0.83 -tools_binman_etype_image_header 5.58 +tools_binman_etype_image_header 5.77 tools_binman_etype_intel_cmc -12.50 tools_binman_etype_intel_descriptor 4.62 tools_binman_etype_intel_fit 0.00 @@ -130,7 +131,7 @@ tools_binman_etype_mkimage 2.31 tools_binman_etype_opensbi -6.00 tools_binman_etype_powerpc_mpc85xx_bootpg_resetvec -10.00 tools_binman_etype_scp -6.00 -tools_binman_etype_section 4.12 +tools_binman_etype_section 4.56 tools_binman_etype_text -0.48 tools_binman_etype_u_boot -15.71 tools_binman_etype_u_boot_dtb -12.22 @@ -157,7 +158,7 @@ tools_binman_etype_u_boot_tpl_nodtb -10.91 tools_binman_etype_u_boot_tpl_with_ucode_ptr -20.83 tools_binman_etype_u_boot_ucode 1.52 tools_binman_etype_u_boot_with_ucode_ptr -0.71 -tools_binman_etype_vblock 0.00 +tools_binman_etype_vblock 0.27 tools_binman_etype_x86_reset16 -15.71 tools_binman_etype_x86_reset16_spl -15.71 tools_binman_etype_x86_reset16_tpl -15.71 @@ -167,60 +168,61 @@ tools_binman_etype_x86_start16_tpl -15.71 tools_binman_fdt_test 3.23 tools_binman_fip_util 9.85 tools_binman_fip_util_test 10.00 -tools_binman_fmap_util 6.67 -tools_binman_ftest 7.39 -tools_binman_image 6.48 +tools_binman_fmap_util 6.88 +tools_binman_ftest 7.44 +tools_binman_image 7.12 tools_binman_image_test 4.48 -tools_binman_main 4.29 +tools_binman_main 4.86 tools_binman_setup 5.00 -tools_binman_state 3.43 -tools_buildman_board 7.11 -tools_buildman_bsettings 0.98 -tools_buildman_builder 6.55 -tools_buildman_builderthread 7.35 -tools_buildman_cmdline 8.85 -tools_buildman_control 7.04 -tools_buildman_func_test 6.38 -tools_buildman_kconfiglib 7.48 -tools_buildman_main 1.43 -tools_buildman_test 6.10 -tools_buildman_toolchain 5.62 -tools_concurrencytest_concurrencytest 6.77 -tools_dtoc_dtb_platdata 7.82 -tools_dtoc_fdt 3.47 -tools_dtoc_fdt_util 5.00 -tools_dtoc_main 7.33 +tools_binman_state 4.15 +tools_buildman_board 7.82 +tools_buildman_bsettings 1.71 +tools_buildman_builder 6.92 +tools_buildman_builderthread 7.48 +tools_buildman_cfgutil 10.00 +tools_buildman_cmdline 8.89 +tools_buildman_control 8.12 +tools_buildman_func_test 7.18 +tools_buildman_kconfiglib 7.49 +tools_buildman_main -1.11 +tools_buildman_test 6.56 +tools_buildman_toolchain 6.44 +tools_concurrencytest_concurrencytest 7.26 +tools_dtoc_dtb_platdata 7.90 +tools_dtoc_fdt 4.50 +tools_dtoc_fdt_util 6.70 +tools_dtoc_main 7.78 tools_dtoc_setup 5.00 -tools_dtoc_src_scan 8.75 -tools_dtoc_test_dtoc 8.54 -tools_dtoc_test_fdt 6.92 +tools_dtoc_src_scan 8.91 +tools_dtoc_test_dtoc 8.56 +tools_dtoc_test_fdt 6.96 tools_dtoc_test_src_scan 9.43 tools_efivar 6.71 -tools_endian-swap 8.93 -tools_genboardscfg 7.27 -tools_microcode-tool 7.19 -tools_moveconfig 8.11 +tools_endian-swap 9.29 +tools_genboardscfg 7.95 +tools_microcode-tool 7.25 +tools_moveconfig 8.32 tools_patman___init__ 0.00 -tools_patman_checkpatch 7.61 -tools_patman_command 4.23 -tools_patman_commit 2.75 +tools_patman_checkpatch 8.04 +tools_patman_command 4.74 +tools_patman_commit 3.25 tools_patman_control 8.14 -tools_patman_cros_subprocess 7.41 -tools_patman_func_test 7.87 -tools_patman_get_maintainer 4.71 -tools_patman_gitutil 4.58 -tools_patman_main 8.23 -tools_patman_patchstream 9.04 -tools_patman_project 3.33 -tools_patman_series 5.95 -tools_patman_settings 5.63 +tools_patman_cros_subprocess 7.56 +tools_patman_func_test 8.49 +tools_patman_get_maintainer 6.47 +tools_patman_gitutil 5.62 +tools_patman_main 8.00 +tools_patman_patchstream 9.11 +tools_patman_project 6.67 +tools_patman_series 6.16 +tools_patman_settings 5.89 tools_patman_setup 5.00 -tools_patman_status 8.43 -tools_patman_terminal 6.29 +tools_patman_status 8.38 +tools_patman_terminal 7.05 tools_patman_test_checkpatch 6.81 -tools_patman_test_util 6.51 -tools_patman_tools 3.98 -tools_patman_tout 2.97 -tools_rkmux 6.76 +tools_patman_test_util 7.36 +tools_patman_tools 4.69 +tools_patman_tout 3.12 +tools_rkmux 6.90 tools_rmboard 7.76 tools_zynqmp_pm_cfg_obj_convert 6.67 diff --git a/test/Kconfig b/test/Kconfig index e15ba23..4137e7e 100644 --- a/test/Kconfig +++ b/test/Kconfig @@ -97,5 +97,6 @@ config UT_UNICODE source "test/dm/Kconfig" source "test/env/Kconfig" +source "test/lib/Kconfig" source "test/optee/Kconfig" source "test/overlay/Kconfig" diff --git a/test/Makefile b/test/Makefile index b3b2902..379f1e9 100644 --- a/test/Makefile +++ b/test/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_$(SPL_)CMDLINE) += cmd_ut.o obj-$(CONFIG_$(SPL_)CMDLINE) += command_ut.o obj-$(CONFIG_$(SPL_)UT_COMPRESSION) += compression.o obj-y += dm/ +obj-$(CONFIG_UNIT_TEST) += lib/ obj-$(CONFIG_$(SPL_)CMDLINE) += print_ut.o obj-$(CONFIG_$(SPL_)CMDLINE) += str_ut.o obj-$(CONFIG_UT_TIME) += time_ut.o @@ -23,7 +24,6 @@ obj-y += ut.o ifeq ($(CONFIG_SPL_BUILD),) obj-$(CONFIG_UNIT_TEST) += common/ -obj-$(CONFIG_UNIT_TEST) += lib/ obj-y += log/ obj-$(CONFIG_$(SPL_)UT_UNICODE) += unicode_ut.o endif diff --git a/test/lib/Kconfig b/test/lib/Kconfig new file mode 100644 index 0000000..dbb03e4 --- /dev/null +++ b/test/lib/Kconfig @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2022 Google LLC + +if SANDBOX + +config TEST_KCONFIG + bool "Enable detection of Kconfig macro errors" + help + This is used to test that the IF_ENABLED_INT() macro causes a build error + if the value is used when the CONFIG Is not enabled. + +config TEST_KCONFIG_ENABLE + bool "Option to enable" + help + This is the option that controls whether the value is present. + +config TEST_KCONFIG_VALUE + int "Value associated with the option" + depends on TEST_KCONFIG_ENABLE + help + This is the value whgch is present if TEST_KCONFIG_ENABLE is enabled. + +endif # SANDBOX diff --git a/test/lib/Makefile b/test/lib/Makefile index d244bb4..7e7922f 100644 --- a/test/lib/Makefile +++ b/test/lib/Makefile @@ -2,11 +2,13 @@ # # (C) Copyright 2018 # Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc +ifeq ($(CONFIG_SPL_BUILD),) obj-y += cmd_ut_lib.o obj-y += abuf.o obj-$(CONFIG_EFI_LOADER) += efi_device_path.o obj-$(CONFIG_EFI_SECURE_BOOT) += efi_image_region.o obj-y += hexdump.o +obj-$(CONFIG_SANDBOX) += kconfig.o obj-y += lmb.o obj-y += longjmp.o obj-$(CONFIG_CONSOLE_RECORD) += test_print.o @@ -19,3 +21,6 @@ obj-$(CONFIG_UT_LIB_RSA) += rsa.o obj-$(CONFIG_AES) += test_aes.o obj-$(CONFIG_GETOPT) += getopt.o obj-$(CONFIG_UT_LIB_CRYPT) += test_crypt.o +else +obj-$(CONFIG_SANDBOX) += kconfig_spl.o +endif diff --git a/test/lib/kconfig.c b/test/lib/kconfig.c new file mode 100644 index 0000000..472d2c5 --- /dev/null +++ b/test/lib/kconfig.c @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Test of linux/kconfig.h macros + * + * Copyright 2022 Google LLC + * Written by Simon Glass <sjg@chromium.org> + */ + +#include <common.h> +#include <test/lib.h> +#include <test/test.h> +#include <test/ut.h> + +static int lib_test_is_enabled(struct unit_test_state *uts) +{ + ulong val; + + ut_asserteq(1, IS_ENABLED(CONFIG_CMDLINE)) + ut_asserteq(0, IS_ENABLED(CONFIG__UNDEFINED)) + + ut_asserteq(1, CONFIG_IS_ENABLED(CMDLINE)) + ut_asserteq(0, CONFIG_IS_ENABLED(OF_PLATDATA)) + ut_asserteq(0, CONFIG_IS_ENABLED(_UNDEFINED)) + + ut_asserteq(0xc000, + IF_ENABLED_INT(CONFIG_BLOBLIST_FIXED, CONFIG_BLOBLIST_ADDR)); + ut_asserteq(0xc000, + CONFIG_IF_ENABLED_INT(BLOBLIST_FIXED, BLOBLIST_ADDR)); + + /* + * This fails if CONFIG_TEST_KCONFIG_ENABLE is not enabled, since the + * value is used. Disable for SPL so that the errors in kconfig_spl.c + * are detected, since otherwise a build error when building U-Boot may + * cause SPL to not be built. + */ + if (!IS_ENABLED(CONFIG_SANDBOX_SPL) && + IS_ENABLED(CONFIG_TEST_KCONFIG)) { + val = IF_ENABLED_INT(CONFIG_TEST_KCONFIG_ENABLE, + CONFIG_TEST_KCONFIG_VALUE); + printf("value %ld\n", val); + } + + /* + * This fails if CONFIG_TEST_KCONFIG_ENABLE is not enabled, since the + * value is used. Disable for SPL so that the errors in kconfig_spl.c + * are detected, since otherwise a build error when building U-Boot may + * cause SPL to not be built. + */ + if (!IS_ENABLED(CONFIG_SANDBOX_SPL) && + CONFIG_IS_ENABLED(TEST_KCONFIG)) { + val = CONFIG_IF_ENABLED_INT(TEST_KCONFIG_ENABLE, + TEST_KCONFIG_VALUE); + printf("value2 %ld\n", val); + } + + return 0; +} +LIB_TEST(lib_test_is_enabled, 0); diff --git a/test/lib/kconfig_spl.c b/test/lib/kconfig_spl.c new file mode 100644 index 0000000..c89ceaec --- /dev/null +++ b/test/lib/kconfig_spl.c @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Test of linux/kconfig.h macros for SPL + * + * Copyright 2022 Google LLC + * Written by Simon Glass <sjg@chromium.org> + */ + +#include <common.h> +#include <test/lib.h> +#include <test/test.h> +#include <test/ut.h> + +static int lib_test_spl_is_enabled(struct unit_test_state *uts) +{ + ulong val; + + ut_asserteq(0, CONFIG_IS_ENABLED(CMDLINE)) + ut_asserteq(1, CONFIG_IS_ENABLED(OF_PLATDATA)) + ut_asserteq(0, CONFIG_IS_ENABLED(_UNDEFINED)) + + /* + * This fails if CONFIG_TEST_KCONFIG_ENABLE is not enabled, since the + * value is used. + */ + if (IS_ENABLED(CONFIG_TEST_KCONFIG)) { + val = IF_ENABLED_INT(CONFIG_TEST_KCONFIG_ENABLE, + CONFIG_TEST_KCONFIG_VALUE); + printf("value %ld\n", val); + } + + /* + * This fails if CONFIG_TEST_KCONFIG_ENABLE is not enabled, since the + * value is used. + */ + if (CONFIG_IS_ENABLED(TEST_KCONFIG)) { + val = CONFIG_IF_ENABLED_INT(TEST_KCONFIG_ENABLE, + TEST_KCONFIG_VALUE); + printf("value2 %ld\n", val); + } + + return 0; +} +LIB_TEST(lib_test_spl_is_enabled, 0); diff --git a/test/py/tests/test_kconfig.py b/test/py/tests/test_kconfig.py new file mode 100644 index 0000000..43ab482 --- /dev/null +++ b/test/py/tests/test_kconfig.py @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2022 Google LLC +# Written by Simon Glass <sjg@chromium.org> + +import pytest + +import u_boot_utils as util + +@pytest.mark.slow +def test_kconfig(u_boot_console): + """Test build failures when IF_ENABLED_INT() option is not enabled""" + cons = u_boot_console + + # This detects build errors in test/lib/kconfig.c + out = util.run_and_log( + cons, ['./tools/buildman/buildman', '--board', 'sandbox', + '-a', 'TEST_KCONFIG'], ignore_errors=True) + assert 'invalid_use_of_IF_ENABLED_INT' in out + assert 'invalid_use_of_CONFIG_IF_ENABLED_INT' in out + +@pytest.mark.slow +def test_kconfig_spl(u_boot_console): + """Test build failures when IF_ENABLED_INT() option is not enabled""" + cons = u_boot_console + + # This detects build errors in test/lib/kconfig_spl.c + out = util.run_and_log( + cons, ['./tools/buildman/buildman', '--board', 'sandbox_spl', + '-a', 'TEST_KCONFIG'], ignore_errors=True) + assert 'invalid_use_of_IF_ENABLED_INT' in out + + # There is no CONFIG_SPL_TEST_KCONFIG, so the CONFIG_IF_ENABLED_INT() + # line should not generate an error + assert 'invalid_use_of_CONFIG_IF_ENABLED_INT' not in out diff --git a/tools/buildman/README b/tools/buildman/README index ce27788..bafb3b0 100644 --- a/tools/buildman/README +++ b/tools/buildman/README @@ -1095,6 +1095,55 @@ This will write the full build into /tmp/build including object files. You must specify the output directory with -o when using -w. +Changing the configuration +========================== + +Sometimes it is useful to change the CONFIG options for a build on the fly. This +can be used to build a board (or multiple) with a few changes to see the impact. +The -a option supports this: + + -a <cfg> + +where <cfg> is a CONFIG option (with or without the CONFIG_ prefix) to enable. +For example: + + buildman -a CMD_SETEXPR_FMT + +will build with CONFIG_CMD_SETEXPR_FMT enabled. + +You can disable options by preceding them with tilde (~). You can specify the +-a option multiple times: + + buildman -a CMD_SETEXPR_FMT -a ~CMDLINE + +Some options have values, in which case you can change them: + + buildman -a 'BOOTCOMMAND="echo hello"' CONFIG_SYS_LOAD_ADDR=0x1000 + +Note that you must put quotes around string options and the whole thing must be +in single quotes, to make sure the shell leave it alone. + +If you try to set an option that does not exist, or that cannot be changed for +some other reason (e.g. it is 'selected' by another option), then buildman +shows an error: + + buildman --board sandbox -a FRED + Building current source for 1 boards (1 thread, 32 jobs per thread) + 0 0 0 /1 -1 (starting)errs + Some CONFIG adjustments did not take effect. This may be because + the request CONFIGs do not exist or conflict with others. + + Failed adjustments: + + FRED Missing expected line: CONFIG_FRED=y + + +One major caveat with this feature with branches (-b) is that buildman does not +name the output directories differently when you change the configuration, so +doing the same build again with different configuration will not trigger a +rebuild. You can use -f to work around that. + + Other options ============= diff --git a/tools/buildman/builder.py b/tools/buildman/builder.py index 122f0d1..720bbb2 100644 --- a/tools/buildman/builder.py +++ b/tools/buildman/builder.py @@ -250,7 +250,7 @@ class Builder: mrproper=False, per_board_out_dir=False, config_only=False, squash_config_y=False, warnings_as_errors=False, work_in_output=False, - test_thread_exceptions=False): + test_thread_exceptions=False, adjust_cfg=None): """Create a new Builder object Args: @@ -280,6 +280,15 @@ class Builder: test_thread_exceptions: Uses for tests only, True to make the threads raise an exception instead of reporting their result. This simulates a failure in the code somewhere + adjust_cfg_list (list of str): List of changes to make to .config + file before building. Each is one of (where C is the config + option with or without the CONFIG_ prefix) + + C to enable C + ~C to disable C + C=val to set the value of C (val must have quotes if C is + a string Kconfig + """ self.toolchains = toolchains self.base_dir = base_dir @@ -315,6 +324,8 @@ class Builder: self.squash_config_y = squash_config_y self.config_filenames = BASE_CONFIG_FILENAMES self.work_in_output = work_in_output + self.adjust_cfg = adjust_cfg + if not self.squash_config_y: self.config_filenames += EXTRA_CONFIG_FILENAMES self._terminated = False @@ -1747,6 +1758,7 @@ class Builder: job.commits = commits job.keep_outputs = keep_outputs job.work_in_output = self.work_in_output + job.adjust_cfg = self.adjust_cfg job.step = self._step if self.num_threads: self.queue.put(job) diff --git a/tools/buildman/builderthread.py b/tools/buildman/builderthread.py index 3e450e4..ecb285c 100644 --- a/tools/buildman/builderthread.py +++ b/tools/buildman/builderthread.py @@ -9,6 +9,7 @@ import shutil import sys import threading +from buildman import cfgutil from patman import command from patman import gitutil @@ -130,7 +131,8 @@ class BuilderThread(threading.Thread): **kwargs) def RunCommit(self, commit_upto, brd, work_dir, do_config, config_only, - force_build, force_build_failures, work_in_output): + force_build, force_build_failures, work_in_output, + adjust_cfg): """Build a particular commit. If the build is already done, and we are not forcing a build, we skip @@ -147,6 +149,13 @@ class BuilderThread(threading.Thread): failure work_in_output: Use the output directory as the work directory and don't write to a separate output directory. + adjust_cfg (list of str): List of changes to make to .config file + before building. Each is one of (where C is either CONFIG_xxx + or just xxx): + C to enable C + ~C to disable C + C=val to set the value of C (val must have quotes if C is + a string Kconfig Returns: tuple containing: @@ -261,7 +270,8 @@ class BuilderThread(threading.Thread): os.remove(fname) # If we need to reconfigure, do that now - if do_config: + cfg_file = os.path.join(out_dir, '.config') + if do_config or adjust_cfg: config_out = '' if self.mrproper: result = self.Make(commit, brd, 'mrproper', cwd, @@ -271,11 +281,19 @@ class BuilderThread(threading.Thread): *(args + config_args), env=env) config_out += result.combined do_config = False # No need to configure next time + if adjust_cfg: + cfgutil.adjust_cfg_file(cfg_file, adjust_cfg) if result.return_code == 0: if config_only: args.append('cfg') result = self.Make(commit, brd, 'build', cwd, *args, env=env) + if adjust_cfg: + errs = cfgutil.check_cfg_file(cfg_file, adjust_cfg) + if errs: + print('errs', errs) + result.stderr += errs + result.return_code = 1 result.stderr = result.stderr.replace(src_dir + '/', '') if self.builder.verbose_build: result.stdout = config_out + result.stdout @@ -486,7 +504,7 @@ class BuilderThread(threading.Thread): work_dir, do_config, self.builder.config_only, force_build or self.builder.force_build, self.builder.force_build_failures, - work_in_output=job.work_in_output) + job.work_in_output, job.adjust_cfg) failed = result.return_code or result.stderr did_config = do_config if failed and not do_config: @@ -495,7 +513,7 @@ class BuilderThread(threading.Thread): if self.builder.force_config_on_failure: result, request_config = self.RunCommit(commit_upto, brd, work_dir, True, False, True, False, - work_in_output=job.work_in_output) + job.work_in_output, job.adjust_cfg) did_config = True if not self.builder.force_reconfig: do_config = request_config @@ -540,8 +558,8 @@ class BuilderThread(threading.Thread): # Just build the currently checked-out build result, request_config = self.RunCommit(None, brd, work_dir, True, self.builder.config_only, True, - self.builder.force_build_failures, - work_in_output=job.work_in_output) + self.builder.force_build_failures, job.work_in_output, + job.adjust_cfg) result.commit_upto = 0 self._WriteResult(result, job.keep_outputs, job.work_in_output) self._SendResult(result) @@ -557,6 +575,6 @@ class BuilderThread(threading.Thread): try: self.RunJob(job) except Exception as e: - print('Thread exception:', e) + print('Thread exception (use -T0 to run without threads):', e) self.builder.thread_exceptions.append(e) self.builder.queue.task_done() diff --git a/tools/buildman/cfgutil.py b/tools/buildman/cfgutil.py new file mode 100644 index 0000000..4eba508 --- /dev/null +++ b/tools/buildman/cfgutil.py @@ -0,0 +1,235 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2022 Google LLC +# Written by Simon Glass <sjg@chromium.org> +# + +"""Utility functions for dealing with Kconfig .confing files""" + +import re + +from patman import tools + +RE_LINE = re.compile(r'(# )?CONFIG_([A-Z0-9_]+)(=(.*)| is not set)') +RE_CFG = re.compile(r'(~?)(CONFIG_)?([A-Z0-9_]+)(=.*)?') + +def make_cfg_line(opt, adj): + """Make a new config line for an option + + Args: + opt (str): Option to process, without CONFIG_ prefix + adj (str): Adjustment to make (C is config option without prefix): + C to enable C + ~C to disable C + C=val to set the value of C (val must have quotes if C is + a string Kconfig) + + Returns: + str: New line to use, one of: + CONFIG_opt=y - option is enabled + # CONFIG_opt is not set - option is disabled + CONFIG_opt=val - option is getting a new value (val is + in quotes if this is a string) + """ + if adj[0] == '~': + return f'# CONFIG_{opt} is not set' + if '=' in adj: + return f'CONFIG_{adj}' + return f'CONFIG_{opt}=y' + +def adjust_cfg_line(line, adjust_cfg, done=None): + """Make an adjustment to a single of line from a .config file + + This processes a .config line, producing a new line if a change for this + CONFIG is requested in adjust_cfg + + Args: + line (str): line to process, e.g. '# CONFIG_FRED is not set' or + 'CONFIG_FRED=y' or 'CONFIG_FRED=0x123' or 'CONFIG_FRED="fred"' + adjust_cfg (dict of str): Changes to make to .config file before + building: + key: str config to change, without the CONFIG_ prefix, e.g. + FRED + value: str change to make (C is config option without prefix): + C to enable C + ~C to disable C + C=val to set the value of C (val must have quotes if C is + a string Kconfig) + done (set of set): Adds the config option to this set if it is changed + in some way. This is used to track which ones have been processed. + None to skip. + + Returns: + tuple: + str: New string for this line (maybe unchanged) + str: Adjustment string that was used + """ + out_line = line + m_line = RE_LINE.match(line) + adj = None + if m_line: + _, opt, _, _ = m_line.groups() + adj = adjust_cfg.get(opt) + if adj: + out_line = make_cfg_line(opt, adj) + if done is not None: + done.add(opt) + + return out_line, adj + +def adjust_cfg_lines(lines, adjust_cfg): + """Make adjustments to a list of lines from a .config file + + Args: + lines (list of str): List of lines to process + adjust_cfg (dict of str): Changes to make to .config file before + building: + key: str config to change, without the CONFIG_ prefix, e.g. + FRED + value: str change to make (C is config option without prefix): + C to enable C + ~C to disable C + C=val to set the value of C (val must have quotes if C is + a string Kconfig) + + Returns: + list of str: New list of lines resulting from the processing + """ + out_lines = [] + done = set() + for line in lines: + out_line, _ = adjust_cfg_line(line, adjust_cfg, done) + out_lines.append(out_line) + + for opt in adjust_cfg: + if opt not in done: + adj = adjust_cfg.get(opt) + out_line = make_cfg_line(opt, adj) + out_lines.append(out_line) + + return out_lines + +def adjust_cfg_file(fname, adjust_cfg): + """Make adjustments to a .config file + + Args: + fname (str): Filename of .config file to change + adjust_cfg (dict of str): Changes to make to .config file before + building: + key: str config to change, without the CONFIG_ prefix, e.g. + FRED + value: str change to make (C is config option without prefix): + C to enable C + ~C to disable C + C=val to set the value of C (val must have quotes if C is + a string Kconfig) + """ + lines = tools.ReadFile(fname, binary=False).splitlines() + out_lines = adjust_cfg_lines(lines, adjust_cfg) + out = '\n'.join(out_lines) + '\n' + tools.WriteFile(fname, out, binary=False) + +def convert_list_to_dict(adjust_cfg_list): + """Convert a list of config changes into the dict used by adjust_cfg_file() + + Args: + adjust_cfg_list (list of str): List of changes to make to .config file + before building. Each is one of (where C is the config option with + or without the CONFIG_ prefix) + + C to enable C + ~C to disable C + C=val to set the value of C (val must have quotes if C is + a string Kconfig + + Returns: + dict of str: Changes to make to .config file before building: + key: str config to change, without the CONFIG_ prefix, e.g. FRED + value: str change to make (C is config option without prefix): + C to enable C + ~C to disable C + C=val to set the value of C (val must have quotes if C is + a string Kconfig) + + Raises: + ValueError: if an item in adjust_cfg_list has invalid syntax + """ + result = {} + for cfg in adjust_cfg_list or []: + m_cfg = RE_CFG.match(cfg) + if not m_cfg: + raise ValueError(f"Invalid CONFIG adjustment '{cfg}'") + negate, _, opt, val = m_cfg.groups() + result[opt] = f'%s{opt}%s' % (negate or '', val or '') + + return result + +def check_cfg_lines(lines, adjust_cfg): + """Check that lines do not conflict with the requested changes + + If a line enables a CONFIG which was requested to be disabled, etc., then + this is an error. This function finds such errors. + + Args: + lines (list of str): List of lines to process + adjust_cfg (dict of str): Changes to make to .config file before + building: + key: str config to change, without the CONFIG_ prefix, e.g. + FRED + value: str change to make (C is config option without prefix): + C to enable C + ~C to disable C + C=val to set the value of C (val must have quotes if C is + a string Kconfig) + + Returns: + list of tuple: list of errors, each a tuple: + str: cfg adjustment requested + str: line of the config that conflicts + """ + bad = [] + done = set() + for line in lines: + out_line, adj = adjust_cfg_line(line, adjust_cfg, done) + if out_line != line: + bad.append([adj, line]) + + for opt in adjust_cfg: + if opt not in done: + adj = adjust_cfg.get(opt) + out_line = make_cfg_line(opt, adj) + bad.append([adj, f'Missing expected line: {out_line}']) + + return bad + +def check_cfg_file(fname, adjust_cfg): + """Check that a config file has been adjusted according to adjust_cfg + + Args: + fname (str): Filename of .config file to change + adjust_cfg (dict of str): Changes to make to .config file before + building: + key: str config to change, without the CONFIG_ prefix, e.g. + FRED + value: str change to make (C is config option without prefix): + C to enable C + ~C to disable C + C=val to set the value of C (val must have quotes if C is + a string Kconfig) + + Returns: + str: None if OK, else an error string listing the problems + """ + lines = tools.ReadFile(fname, binary=False).splitlines() + bad_cfgs = check_cfg_lines(lines, adjust_cfg) + if bad_cfgs: + out = [f'{cfg:20} {line}' for cfg, line in bad_cfgs] + content = '\\n'.join(out) + return f''' +Some CONFIG adjustments did not take effect. This may be because +the request CONFIGs do not exist or conflict with others. + +Failed adjustments: + +{content} +''' + return None diff --git a/tools/buildman/cmdline.py b/tools/buildman/cmdline.py index 274b5ac..8586bdf 100644 --- a/tools/buildman/cmdline.py +++ b/tools/buildman/cmdline.py @@ -13,6 +13,8 @@ def ParseArgs(): args: command lin arguments """ parser = OptionParser() + parser.add_option('-a', '--adjust-cfg', type=str, action='append', + help='Adjust the Kconfig settings in .config before building') parser.add_option('-A', '--print-prefix', action='store_true', help='Print the tool-chain prefix for a board (CROSS_COMPILE=)') parser.add_option('-b', '--branch', type='string', @@ -32,6 +34,8 @@ def ParseArgs(): help='Show detailed size delta for each board in the -S summary') parser.add_option('-D', '--config-only', action='store_true', default=False, help="Don't build, just configure each commit") + parser.add_option('--debug', action='store_true', + help='Enabling debugging (provides a full traceback on error)') parser.add_option('-e', '--show_errors', action='store_true', default=False, help='Show errors and warnings') parser.add_option('-E', '--warnings-as-errors', action='store_true', diff --git a/tools/buildman/control.py b/tools/buildman/control.py index fd9664c..eee8113 100644 --- a/tools/buildman/control.py +++ b/tools/buildman/control.py @@ -10,6 +10,7 @@ import sys from buildman import board from buildman import bsettings +from buildman import cfgutil from buildman import toolchain from buildman.builder import Builder from patman import command @@ -321,6 +322,8 @@ def DoBuildman(options, args, toolchains=None, make_func=None, boards=None, output_dir = os.path.join(options.output_dir, dirname) if clean_dir and os.path.exists(output_dir): shutil.rmtree(output_dir) + adjust_cfg = cfgutil.convert_list_to_dict(options.adjust_cfg) + builder = Builder(toolchains, output_dir, options.git_dir, options.threads, options.jobs, gnu_make=gnu_make, checkout=True, show_unknown=options.show_unknown, step=options.step, @@ -332,7 +335,8 @@ def DoBuildman(options, args, toolchains=None, make_func=None, boards=None, squash_config_y=not options.preserve_config_y, warnings_as_errors=options.warnings_as_errors, work_in_output=options.work_in_output, - test_thread_exceptions=test_thread_exceptions) + test_thread_exceptions=test_thread_exceptions, + adjust_cfg=adjust_cfg) builder.force_config_on_failure = not options.quick if make_func: builder.do_make = make_func diff --git a/tools/buildman/func_test.py b/tools/buildman/func_test.py index 7edbee0..c2e0b0b 100644 --- a/tools/buildman/func_test.py +++ b/tools/buildman/func_test.py @@ -182,11 +182,11 @@ class TestFunctional(unittest.TestCase): self._buildman_pathname = sys.argv[0] self._buildman_dir = os.path.dirname(os.path.realpath(sys.argv[0])) command.test_result = self._HandleCommand + bsettings.Setup(None) + bsettings.AddFile(settings_data) self.setupToolchains() self._toolchains.Add('arm-gcc', test=False) self._toolchains.Add('powerpc-gcc', test=False) - bsettings.Setup(None) - bsettings.AddFile(settings_data) self._boards = board.Boards() for brd in boards: self._boards.AddBoard(board.Board(*brd)) @@ -623,4 +623,6 @@ class TestFunctional(unittest.TestCase): with test_util.capture_sys_output() as (stdout, stderr): self.assertEqual(102, self._RunControl('-o', self._output_dir, test_thread_exceptions=True)) - self.assertIn('Thread exception: test exception', stdout.getvalue()) + self.assertIn( + 'Thread exception (use -T0 to run without threads): test exception', + stdout.getvalue()) diff --git a/tools/buildman/main.py b/tools/buildman/main.py index 2b71473..c6af311 100755 --- a/tools/buildman/main.py +++ b/tools/buildman/main.py @@ -27,36 +27,35 @@ from buildman import toolchain from patman import patchstream from patman import gitutil from patman import terminal +from patman import test_util -def RunTests(skip_net_tests): +def RunTests(skip_net_tests, verboose, args): import func_test import test import doctest result = unittest.TestResult() - for module in ['buildman.toolchain', 'patman.gitutil']: - suite = doctest.DocTestSuite(module) - suite.run(result) - - sys.argv = [sys.argv[0]] + test_name = args and args[0] or None if skip_net_tests: test.use_network = False - for module in (test.TestBuild, func_test.TestFunctional): - suite = unittest.TestLoader().loadTestsFromTestCase(module) - suite.run(result) - print(result) - for test, err in result.errors: - print(err) - for test, err in result.failures: - print(err) + # Run the entry tests first ,since these need to be the first to import the + # 'entry' module. + test_util.RunTestSuites( + result, False, verboose, False, None, test_name, [], + [test.TestBuild, func_test.TestFunctional, + 'buildman.toolchain', 'patman.gitutil']) + return test_util.ReportResult('buildman', test_name, result) options, args = cmdline.ParseArgs() +if not options.debug: + sys.tracebacklimit = 0 + # Run our meagre tests if options.test: - RunTests(options.skip_net_tests) + RunTests(options.skip_net_tests, options.verbose, args) # Build selected commits for selected boards else: diff --git a/tools/buildman/test.py b/tools/buildman/test.py index b9c65c0..2751377 100644 --- a/tools/buildman/test.py +++ b/tools/buildman/test.py @@ -12,6 +12,7 @@ import unittest from buildman import board from buildman import bsettings from buildman import builder +from buildman import cfgutil from buildman import control from buildman import toolchain from patman import commit @@ -624,5 +625,127 @@ class TestBuild(unittest.TestCase): expected = set([os.path.join(base_dir, f) for f in to_remove]) self.assertEqual(expected, result) + def test_adjust_cfg_nop(self): + """check various adjustments of config that are nops""" + # enable an enabled CONFIG + self.assertEqual( + 'CONFIG_FRED=y', + cfgutil.adjust_cfg_line('CONFIG_FRED=y', {'FRED':'FRED'})[0]) + + # disable a disabled CONFIG + self.assertEqual( + '# CONFIG_FRED is not set', + cfgutil.adjust_cfg_line( + '# CONFIG_FRED is not set', {'FRED':'~FRED'})[0]) + + # use the adjust_cfg_lines() function + self.assertEqual( + ['CONFIG_FRED=y'], + cfgutil.adjust_cfg_lines(['CONFIG_FRED=y'], {'FRED':'FRED'})) + self.assertEqual( + ['# CONFIG_FRED is not set'], + cfgutil.adjust_cfg_lines(['CONFIG_FRED=y'], {'FRED':'~FRED'})) + + # handling an empty line + self.assertEqual('#', cfgutil.adjust_cfg_line('#', {'FRED':'~FRED'})[0]) + + def test_adjust_cfg(self): + """check various adjustments of config""" + # disable a CONFIG + self.assertEqual( + '# CONFIG_FRED is not set', + cfgutil.adjust_cfg_line('CONFIG_FRED=1' , {'FRED':'~FRED'})[0]) + + # enable a disabled CONFIG + self.assertEqual( + 'CONFIG_FRED=y', + cfgutil.adjust_cfg_line( + '# CONFIG_FRED is not set', {'FRED':'FRED'})[0]) + + # enable a CONFIG that doesn't exist + self.assertEqual( + ['CONFIG_FRED=y'], + cfgutil.adjust_cfg_lines([], {'FRED':'FRED'})) + + # disable a CONFIG that doesn't exist + self.assertEqual( + ['# CONFIG_FRED is not set'], + cfgutil.adjust_cfg_lines([], {'FRED':'~FRED'})) + + # disable a value CONFIG + self.assertEqual( + '# CONFIG_FRED is not set', + cfgutil.adjust_cfg_line('CONFIG_FRED="fred"' , {'FRED':'~FRED'})[0]) + + # setting a value CONFIG + self.assertEqual( + 'CONFIG_FRED="fred"', + cfgutil.adjust_cfg_line('# CONFIG_FRED is not set' , + {'FRED':'FRED="fred"'})[0]) + + # changing a value CONFIG + self.assertEqual( + 'CONFIG_FRED="fred"', + cfgutil.adjust_cfg_line('CONFIG_FRED="ernie"' , + {'FRED':'FRED="fred"'})[0]) + + # setting a value for a CONFIG that doesn't exist + self.assertEqual( + ['CONFIG_FRED="fred"'], + cfgutil.adjust_cfg_lines([], {'FRED':'FRED="fred"'})) + + def test_convert_adjust_cfg_list(self): + """Check conversion of the list of changes into a dict""" + self.assertEqual({}, cfgutil.convert_list_to_dict(None)) + + expect = { + 'FRED':'FRED', + 'MARY':'~MARY', + 'JOHN':'JOHN=0x123', + 'ALICE':'ALICE="alice"', + 'AMY':'AMY', + 'ABE':'~ABE', + 'MARK':'MARK=0x456', + 'ANNA':'ANNA="anna"', + } + actual = cfgutil.convert_list_to_dict( + ['FRED', '~MARY', 'JOHN=0x123', 'ALICE="alice"', + 'CONFIG_AMY', '~CONFIG_ABE', 'CONFIG_MARK=0x456', + 'CONFIG_ANNA="anna"']) + self.assertEqual(expect, actual) + + def test_check_cfg_file(self): + """Test check_cfg_file detects conflicts as expected""" + # Check failure to disable CONFIG + result = cfgutil.check_cfg_lines(['CONFIG_FRED=1'], {'FRED':'~FRED'}) + self.assertEqual([['~FRED', 'CONFIG_FRED=1']], result) + + result = cfgutil.check_cfg_lines( + ['CONFIG_FRED=1', 'CONFIG_MARY="mary"'], {'FRED':'~FRED'}) + self.assertEqual([['~FRED', 'CONFIG_FRED=1']], result) + + result = cfgutil.check_cfg_lines( + ['CONFIG_FRED=1', 'CONFIG_MARY="mary"'], {'MARY':'~MARY'}) + self.assertEqual([['~MARY', 'CONFIG_MARY="mary"']], result) + + # Check failure to enable CONFIG + result = cfgutil.check_cfg_lines( + ['# CONFIG_FRED is not set'], {'FRED':'FRED'}) + self.assertEqual([['FRED', '# CONFIG_FRED is not set']], result) + + # Check failure to set CONFIG value + result = cfgutil.check_cfg_lines( + ['# CONFIG_FRED is not set', 'CONFIG_MARY="not"'], + {'MARY':'MARY="mary"', 'FRED':'FRED'}) + self.assertEqual([ + ['FRED', '# CONFIG_FRED is not set'], + ['MARY="mary"', 'CONFIG_MARY="not"']], result) + + # Check failure to add CONFIG value + result = cfgutil.check_cfg_lines([], {'MARY':'MARY="mary"'}) + self.assertEqual([ + ['MARY="mary"', 'Missing expected line: CONFIG_MARY="mary"']], result) + + if __name__ == "__main__": unittest.main() diff --git a/tools/dtoc/main.py b/tools/dtoc/main.py index 6f9b526..276cfad 100755 --- a/tools/dtoc/main.py +++ b/tools/dtoc/main.py @@ -58,7 +58,7 @@ def run_tests(processes, args): test_util.RunTestSuites( result, debug=True, verbosity=1, test_preserve_dirs=False, processes=processes, test_name=test_name, toolpath=[], - test_class_list=[test_dtoc.TestDtoc,test_src_scan.TestSrcScan]) + class_and_module_list=[test_dtoc.TestDtoc,test_src_scan.TestSrcScan]) return test_util.ReportResult('binman', test_name, result) diff --git a/tools/patman/main.py b/tools/patman/main.py index e5be28e..c01ae36 100755 --- a/tools/patman/main.py +++ b/tools/patman/main.py @@ -134,23 +134,11 @@ if args.cmd == 'test': import doctest from patman import func_test - sys.argv = [sys.argv[0]] result = unittest.TestResult() - suite = unittest.TestSuite() - loader = unittest.TestLoader() - for module in (test_checkpatch.TestPatch, func_test.TestFunctional): - if args.testname: - try: - suite.addTests(loader.loadTestsFromName(args.testname, module)) - except AttributeError: - continue - else: - suite.addTests(loader.loadTestsFromTestCase(module)) - suite.run(result) - - for module in ['gitutil', 'settings', 'terminal']: - suite = doctest.DocTestSuite(module) - suite.run(result) + test_util.RunTestSuites( + result, False, False, False, None, None, None, + [test_checkpatch.TestPatch, func_test.TestFunctional, + 'gitutil', 'settings', 'terminal']) sys.exit(test_util.ReportResult('patman', args.testname, result)) diff --git a/tools/patman/test_util.py b/tools/patman/test_util.py index 4e26175..9654e73 100644 --- a/tools/patman/test_util.py +++ b/tools/patman/test_util.py @@ -4,6 +4,7 @@ # from contextlib import contextmanager +import doctest import glob import multiprocessing import os @@ -139,7 +140,7 @@ def ReportResult(toolname:str, test_name: str, result: unittest.TestResult): def RunTestSuites(result, debug, verbosity, test_preserve_dirs, processes, - test_name, toolpath, test_class_list): + test_name, toolpath, class_and_module_list): """Run a series of test suites and collect the results Args: @@ -154,11 +155,13 @@ def RunTestSuites(result, debug, verbosity, test_preserve_dirs, processes, processes: Number of processes to use to run tests (None=same as #CPUs) test_name: Name of test to run, or None for all toolpath: List of paths to use for tools - test_class_list: List of test classes to run + class_and_module_list: List of test classes (type class) and module + names (type str) to run """ - for module in []: - suite = doctest.DocTestSuite(module) - suite.run(result) + for module in class_and_module_list: + if isinstance(module, str) and (not test_name or test_name == module): + suite = doctest.DocTestSuite(module) + suite.run(result) sys.argv = [sys.argv[0]] if debug: @@ -171,7 +174,9 @@ def RunTestSuites(result, debug, verbosity, test_preserve_dirs, processes, suite = unittest.TestSuite() loader = unittest.TestLoader() - for module in test_class_list: + for module in class_and_module_list: + if isinstance(module, str): + continue # Test the test module about our arguments, if it is interested if hasattr(module, 'setup_test_args'): setup_test_args = getattr(module, 'setup_test_args') |