Revert "tree: imx: remove old fit generator script"

This reverts commit d9a6f0eed66a39206b13513ec914f14084c3bb73.

For right now, it's too close to the release to merge the series that
allows for binman to be used to generate the final images, and also not
break CI, and then also merge all of the series that convert currently
broken platforms to use binman instead.  So, bring back this script now
and remove it again for real after the release.

Suggested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

2 files changed, 146 insertions, 0 deletions

diff --git a/Makefile b/Makefile
index ae9bfab..0c47864 100644
--- a/Makefile
+++ b/Makefile
@@ -1343,6 +1343,9 @@ $(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
 else
 ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
 U_BOOT_ITS := u-boot.its
+ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
+U_BOOT_ITS_DEPS += u-boot-nodtb.bin
+endif
 ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
 U_BOOT_ITS_DEPS += u-boot
 endif
diff --git a/arch/arm/mach-imx/mkimage_fit_atf.sh b/arch/arm/mach-imx/mkimage_fit_atf.sh
new file mode 100755
index 0000000..2a17968
--- /dev/null
+++ b/arch/arm/mach-imx/mkimage_fit_atf.sh
@@ -0,0 +1,143 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# script to generate FIT image source for i.MX8MQ boards with
+# ARM Trusted Firmware and multiple device trees (given on the command line)
+#
+# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
+
+[ -z "$BL31" ] && BL31="bl31.bin"
+[ -z "$TEE_LOAD_ADDR" ] && TEE_LOAD_ADDR="0xfe000000"
+[ -z "$ATF_LOAD_ADDR" ] && ATF_LOAD_ADDR="0x00910000"
+[ -z "$BL33_LOAD_ADDR" ] && BL33_LOAD_ADDR="0x40200000"
+
+if [ ! -f $BL31 ]; then
+	echo "ERROR: BL31 file $BL31 NOT found" >&2
+	exit 0
+else
+	echo "$BL31 size: " >&2
+	stat -c %s $BL31 >&2
+fi
+
+BL32="tee.bin"
+
+if [ ! -f $BL32 ]; then
+	BL32=/dev/null
+else
+	echo "Building with TEE support, make sure your $BL31 is compiled with spd. If you do not want tee, please delete $BL31" >&2
+	echo "$BL32 size: " >&2
+	stat -c %s $BL32 >&2
+fi
+
+BL33="u-boot-nodtb.bin"
+
+if [ ! -f $BL33 ]; then
+	echo "ERROR: $BL33 file NOT found" >&2
+	exit 0
+else
+	echo "u-boot-nodtb.bin size: " >&2
+	stat -c %s u-boot-nodtb.bin >&2
+fi
+
+for dtname in $*
+do
+	echo "$dtname size: " >&2
+	stat -c %s $dtname >&2
+done
+
+
+cat << __HEADER_EOF
+/dts-v1/;
+
+/ {
+	description = "Configuration to load ATF before U-Boot";
+
+	images {
+		uboot@1 {
+			description = "U-Boot (64-bit)";
+			os = "u-boot";
+			data = /incbin/("$BL33");
+			type = "standalone";
+			arch = "arm64";
+			compression = "none";
+			load = <$BL33_LOAD_ADDR>;
+		};
+__HEADER_EOF
+
+cnt=1
+for dtname in $*
+do
+	cat << __FDT_IMAGE_EOF
+		fdt@$cnt {
+			description = "$(basename $dtname .dtb)";
+			data = /incbin/("$dtname");
+			type = "flat_dt";
+			compression = "none";
+		};
+__FDT_IMAGE_EOF
+cnt=$((cnt+1))
+done
+
+cat << __HEADER_EOF
+		atf@1 {
+			description = "ARM Trusted Firmware";
+			os = "arm-trusted-firmware";
+			data = /incbin/("$BL31");
+			type = "firmware";
+			arch = "arm64";
+			compression = "none";
+			load = <$ATF_LOAD_ADDR>;
+			entry = <$ATF_LOAD_ADDR>;
+		};
+__HEADER_EOF
+
+if [ -f $BL32 ]; then
+cat << __HEADER_EOF
+		tee@1 {
+			description = "TEE firmware";
+			data = /incbin/("$BL32");
+			type = "firmware";
+			arch = "arm64";
+			compression = "none";
+			load = <$TEE_LOAD_ADDR>;
+			entry = <$TEE_LOAD_ADDR>;
+		};
+__HEADER_EOF
+fi
+
+cat << __CONF_HEADER_EOF
+	};
+	configurations {
+		default = "config@1";
+
+__CONF_HEADER_EOF
+
+cnt=1
+for dtname in $*
+do
+if [ -f $BL32 ]; then
+cat << __CONF_SECTION_EOF
+		config@$cnt {
+			description = "$(basename $dtname .dtb)";
+			firmware = "uboot@1";
+			loadables = "atf@1", "tee@1";
+			fdt = "fdt@$cnt";
+		};
+__CONF_SECTION_EOF
+else
+cat << __CONF_SECTION1_EOF
+		config@$cnt {
+			description = "$(basename $dtname .dtb)";
+			firmware = "uboot@1";
+			loadables = "atf@1";
+			fdt = "fdt@$cnt";
+		};
+__CONF_SECTION1_EOF
+fi
+cnt=$((cnt+1))
+done
+
+cat << __ITS_EOF
+	};
+};
+__ITS_EOF