diff options
| author | Faiz Abbas <faiz_abbas@ti.com> | 2020-08-03 11:35:09 +0530 |
|---|---|---|
| committer | Lokesh Vutla <lokeshvutla@ti.com> | 2020-08-11 20:34:46 +0530 |
| commit | 403fc5c9cf2c40c85e0c3d0c8bc36244a665cb74 (patch) | |
| tree | 3dc51ba06f5c3de72e5354a77ae4cb91a7fa81c9 | |
| parent | febb47ac61085d45d8b21a69c31b59b162e82a2a (diff) | |
| download | u-boot-403fc5c9cf2c40c85e0c3d0c8bc36244a665cb74.zip u-boot-403fc5c9cf2c40c85e0c3d0c8bc36244a665cb74.tar.gz u-boot-403fc5c9cf2c40c85e0c3d0c8bc36244a665cb74.tar.bz2 | |
arm: mach-k3: am6_init: Do USB fixups to facilitate host and device boot modes
U-boot only supports either USB host or device mode for a node at a
time in dts. To support both host and dfu bootmodes, set "peripheral"
as the default dr_mode but fixup property to "host" if host bootmode
is detected.
This needs to happen before the dwc3 generic layer binds the usb device
to a host or device driver. Therefore, add an fdtdec_setup_board()
implementation to fixup the dt based on the boot mode.
Also use the same fixup function to set the USB-PCIe Serdes mux to PCIe
in both the host and device cases. This is required for accessing the
interface at USB 2.0 speeds.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
| -rw-r--r-- | arch/arm/mach-k3/am6_init.c | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c index 42d13a3..c6d4f05 100644 --- a/arch/arm/mach-k3/am6_init.c +++ b/arch/arm/mach-k3/am6_init.c @@ -7,6 +7,7 @@ */ #include <common.h> +#include <fdt_support.h> #include <init.h> #include <asm/io.h> #include <spl.h> @@ -22,6 +23,8 @@ #include <mmc.h> #include <stdlib.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_SPL_BUILD #ifdef CONFIG_K3_LOAD_SYSFW #ifdef CONFIG_TI_SECURE_DEVICE @@ -119,7 +122,44 @@ void k3_mmc_restart_clock(void) void k3_mmc_stop_clock(void) {} void k3_mmc_restart_clock(void) {} #endif +#if CONFIG_IS_ENABLED(DFU) || CONFIG_IS_ENABLED(USB_STORAGE) +#define CTRLMMR_SERDES0_CTRL 0x00104080 +#define PCIE_LANE0 0x1 +static int fixup_usb_boot(void) +{ + int ret; + switch (spl_boot_device()) { + case BOOT_DEVICE_USB: + /* + * If bootmode is Host bootmode, fixup the dr_mode to host + * before the dwc3 bind takes place + */ + ret = fdt_find_and_setprop((void *)gd->fdt_blob, + "/interconnect@100000/dwc3@4000000/usb@10000", + "dr_mode", "host", 11, 0); + if (ret) + printf("%s: fdt_find_and_setprop() failed:%d\n", __func__, + ret); + fallthrough; + case BOOT_DEVICE_DFU: + /* + * The serdes mux between PCIe and USB3 needs to be set to PCIe for + * accessing the interface at USB 2.0 + */ + writel(PCIE_LANE0, CTRLMMR_SERDES0_CTRL); + default: + break; + } + + return 0; +} + +int fdtdec_board_setup(const void *fdt_blob) +{ + return fixup_usb_boot(); +} +#endif void board_init_f(ulong dummy) { #if defined(CONFIG_K3_LOAD_SYSFW) || defined(CONFIG_K3_AM654_DDRSS) |