aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorNikita Kiryanov <nikita@compulab.co.il>2014-08-20 15:08:50 +0300
committerJagannadha Sutradharudu Teki <jaganna@xilinx.com>2014-09-24 17:25:39 +0530
commit155fa9af95ac5be857a7327e7a968a296e60d4c8 (patch)
treea35b45e4eee9707e0661e0da7f86b28b6ab393b6
parent01d2aaf61ba7d532dee7002a2049d2b972992122 (diff)
downloadu-boot-155fa9af95ac5be857a7327e7a968a296e60d4c8.zip
u-boot-155fa9af95ac5be857a7327e7a968a296e60d4c8.tar.gz
u-boot-155fa9af95ac5be857a7327e7a968a296e60d4c8.tar.bz2
spi: mxc: fix sf probe when using mxc_spi
MXC SPI driver has a feature whereas a GPIO line can be used to force CS high across multiple transactions. This is set up by embedding the GPIO information in the CS value: cs = (cs | gpio << 8) This merge of cs and gpio data into one value breaks the sf probe command: if the use of gpio is required, invoking "sf probe <cs>" will not work, because the CS argument doesn't have the GPIO information in it. Instead, the user must use "sf probe <cs | gpio << 8>". For example, if bank 2 gpio 30 is used to force cs high on cs 0, bus 0, then instead of typing "sf probe 0" the user now must type "sf probe 15872". This is inconsistent with the description of the sf probe command, and forces the user to be aware of implementaiton details. Fix this by introducing a new board function: board_spi_cs_gpio(), which will accept a naked CS value, and provide the driver with the relevant GPIO, if one is necessary. Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Eric Benard <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
-rw-r--r--board/boundary/nitrogen6x/nitrogen6x.c5
-rw-r--r--board/embest/mx6boards/mx6boards.c5
-rw-r--r--board/freescale/mx6qsabreauto/mx6qsabreauto.c7
-rw-r--r--board/freescale/mx6sabresd/mx6sabresd.c7
-rw-r--r--board/freescale/mx6slevk/mx6slevk.c5
-rw-r--r--board/gateworks/gw_ventana/gw_ventana.c7
-rw-r--r--board/genesi/mx51_efikamx/efikamx.c5
-rw-r--r--board/ttcontrol/vision2/vision2.c5
-rw-r--r--drivers/spi/mxc_spi.c48
-rw-r--r--include/configs/embestmx6boards.h2
-rw-r--r--include/configs/gw_ventana.h2
-rw-r--r--include/configs/mx51_efikamx.h4
-rw-r--r--include/configs/mx6sabre_common.h2
-rw-r--r--include/configs/mx6slevk.h2
-rw-r--r--include/configs/nitrogen6x.h2
-rw-r--r--include/configs/vision2.h4
16 files changed, 79 insertions, 33 deletions
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index 60a09f4..7edfe19 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -328,6 +328,11 @@ int board_mmc_init(bd_t *bis)
#endif
#ifdef CONFIG_MXC_SPI
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -1;
+}
+
iomux_v3_cfg_t const ecspi1_pads[] = {
/* SS1 */
MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c
index 530ea4f..a725f15 100644
--- a/board/embest/mx6boards/mx6boards.c
+++ b/board/embest/mx6boards/mx6boards.c
@@ -285,6 +285,11 @@ iomux_v3_cfg_t const ecspi1_pads[] = {
MX6_PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(2, 30)) : -1;
+}
+
static void setup_spi(void)
{
imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index 928dadf..836d722 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -259,6 +259,13 @@ int board_init(void)
return 0;
}
+#ifdef CONFIG_MXC_SPI
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1;
+}
+#endif
+
#ifdef CONFIG_CMD_BMODE
static const struct boot_mode board_boot_modes[] = {
/* 4 bit bus width */
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 80c8ebd..81dcd6e 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -513,6 +513,13 @@ static int pfuze_init(void)
return 0;
}
+#ifdef CONFIG_MXC_SPI
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1;
+}
+#endif
+
#ifdef CONFIG_CMD_BMODE
static const struct boot_mode board_boot_modes[] = {
/* 4 bit bus width */
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index a990b4c..a0832f4 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -82,6 +82,11 @@ static iomux_v3_cfg_t ecspi1_pads[] = {
MX6_PAD_ECSPI1_SS0__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 11)) : -1;
+}
+
static void setup_spi(void)
{
imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 8d086f8..1038d9d 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -356,9 +356,14 @@ iomux_v3_cfg_t const ecspi1_pads[] = {
IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
};
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -1;
+}
+
static void setup_spi(void)
{
- gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1);
+ gpio_direction_output(IMX_GPIO_NR(3, 19), 1);
SETUP_IOMUX_PADS(ecspi1_pads);
}
#endif
diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c
index 16769e5..137e4ed 100644
--- a/board/genesi/mx51_efikamx/efikamx.c
+++ b/board/genesi/mx51_efikamx/efikamx.c
@@ -152,6 +152,11 @@ static iomux_v3_cfg_t const efikamx_spi_pads[] = {
* PMIC configuration
*/
#ifdef CONFIG_MXC_SPI
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return (bus == 0 && cs == 1) ? 121 : -1;
+}
+
static void power_init(void)
{
unsigned int val;
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
index b4d3994..b5249e7 100644
--- a/board/ttcontrol/vision2/vision2.c
+++ b/board/ttcontrol/vision2/vision2.c
@@ -144,6 +144,11 @@ static void setup_uart(void)
}
#ifdef CONFIG_MXC_SPI
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return (bus == 0 && cs == 1) ? 121 : -1;
+}
+
void spi_io_init(void)
{
static const iomux_v3_cfg_t spi_pads[] = {
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index 2d5f385..026f680 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -25,6 +25,11 @@ static unsigned long spi_bases[] = {
MXC_SPI_BASE_ADDRESSES
};
+__weak int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return -1;
+}
+
#define OUT MXC_GPIO_DIRECTION_OUT
#define reg_read readl
@@ -371,31 +376,30 @@ void spi_init(void)
{
}
-static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs)
+/*
+ * Some SPI devices require active chip-select over multiple
+ * transactions, we achieve this using a GPIO. Still, the SPI
+ * controller has to be configured to use one of its own chipselects.
+ * To use this feature you have to implement board_spi_cs_gpio() to assign
+ * a gpio value for each cs (-1 if cs doesn't need to use gpio).
+ * You must use some unused on this SPI controller cs between 0 and 3.
+ */
+static int setup_cs_gpio(struct mxc_spi_slave *mxcs,
+ unsigned int bus, unsigned int cs)
{
int ret;
- /*
- * Some SPI devices require active chip-select over multiple
- * transactions, we achieve this using a GPIO. Still, the SPI
- * controller has to be configured to use one of its own chipselects.
- * To use this feature you have to call spi_setup_slave() with
- * cs = internal_cs | (gpio << 8), and you have to use some unused
- * on this SPI controller cs between 0 and 3.
- */
- if (cs > 3) {
- mxcs->gpio = cs >> 8;
- cs &= 3;
- ret = gpio_direction_output(mxcs->gpio, !(mxcs->ss_pol));
- if (ret) {
- printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio);
- return -EINVAL;
- }
- } else {
- mxcs->gpio = -1;
+ mxcs->gpio = board_spi_cs_gpio(bus, cs);
+ if (mxcs->gpio == -1)
+ return 0;
+
+ ret = gpio_direction_output(mxcs->gpio, !(mxcs->ss_pol));
+ if (ret) {
+ printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio);
+ return -EINVAL;
}
- return cs;
+ return 0;
}
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
@@ -415,14 +419,12 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0;
- ret = decode_cs(mxcs, cs);
+ ret = setup_cs_gpio(mxcs, bus, cs);
if (ret < 0) {
free(mxcs);
return NULL;
}
- cs = ret;
-
mxcs->base = spi_bases[bus];
ret = spi_cfg_mxc(mxcs, cs, max_hz, mode);
diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
index a7fd43b..185edbe 100644
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@@ -102,7 +102,7 @@
#define CONFIG_SPI_FLASH_SST
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS 0
-#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(2, 30) << 8))
+#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 20000000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#endif
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 0e5c200..620f950 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -61,7 +61,7 @@
#define CONFIG_SPI_FLASH_BAR
#define CONFIG_SPI_FLASH_WINBOND
#define CONFIG_SF_DEFAULT_BUS 0
- #define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8))
+ #define CONFIG_SF_DEFAULT_CS 0
/* GPIO 3-19 (21248) */
#define CONFIG_SF_DEFAULT_SPEED 30000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h
index 0f2a4ef..fce7ead 100644
--- a/include/configs/mx51_efikamx.h
+++ b/include/configs/mx51_efikamx.h
@@ -96,11 +96,11 @@
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_SST
-#define CONFIG_SF_DEFAULT_CS (1 | 121 << 8)
+#define CONFIG_SF_DEFAULT_CS 1
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
#define CONFIG_SF_DEFAULT_SPEED 25000000
-#define CONFIG_ENV_SPI_CS (1 | 121 << 8)
+#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_BUS 0
#define CONFIG_ENV_SPI_MAX_HZ 25000000
#define CONFIG_ENV_SPI_MODE (SPI_MODE_0)
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index e59a3b4..2d93d6c 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -74,7 +74,7 @@
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS 0
-#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(4, 9) << 8))
+#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 20000000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#endif
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 194d7bd..4208ba1 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -205,7 +205,7 @@
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS 0
-#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(4, 11) << 8))
+#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 20000000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#endif
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index d4b0ac9..39d5bb3 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -53,7 +53,7 @@
#define CONFIG_SPI_FLASH_SST
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS 0
-#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8))
+#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 25000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
#endif
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index 6891bf8..3f35076 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -57,11 +57,11 @@
* Use gpio 4 pin 25 as chip select for SPI flash
* This corresponds to gpio 121
*/
-#define CONFIG_SF_DEFAULT_CS (1 | (121 << 8))
+#define CONFIG_SF_DEFAULT_CS 1
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_SF_DEFAULT_SPEED 25000000
-#define CONFIG_ENV_SPI_CS (1 | (121 << 8))
+#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_BUS 0
#define CONFIG_ENV_SPI_MAX_HZ 25000000
#define CONFIG_ENV_SPI_MODE SPI_MODE_0