mips: octeon: nic23: Enable ethernet support

This patch enables the Kconfig symbols needed for full ethernet support
on the NIC23. Additionally board specific setup is done, mostly GPIOs
related to SFP / GPIO configuration. With this, ethernet can be used on
this board. Here an example of a tftp load:

=> tftp ffffffff81000000 big
Using ethernet-mac-nexus@11800e2000000 device
TFTP from server 192.168.1.5; our IP address is 192.168.1.247
Filename 'big'.
Load address: 0xffffffff81000000
Loading: ##################################################  10 MiB
         9.7 MiB/s
done
Bytes transferred = 10485760 (a00000 hex)

Signed-off-by: Stefan Roese <sr@denx.de>

2 files changed, 95 insertions, 2 deletions

diff --git a/board/Marvell/octeon_nic23/board.c b/board/Marvell/octeon_nic23/board.c
index 9f5eb2e..3e2c544 100644
--- a/board/Marvell/octeon_nic23/board.c
+++ b/board/Marvell/octeon_nic23/board.c
@@ -1,10 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright (C) 2021 Stefan Roese <sr@denx.de>
+ * Copyright (C) 2021-2022 Stefan Roese <sr@denx.de>
  */
 
 #include <dm.h>
 #include <ram.h>
+#include <asm/gpio.h>
 
 #include <mach/octeon_ddr.h>
 #include <mach/cvmx-qlm.h>
@@ -84,6 +85,52 @@ int board_fix_fdt(void *fdt)
 	return rc;
 }
 
+int board_early_init_f(void)
+{
+	struct gpio_desc gpio = {};
+	ofnode node;
+
+	/* Initial GPIO configuration */
+
+	/* GPIO 7: Vitesse reset */
+	node = ofnode_by_compatible(ofnode_null(), "vitesse,vsc7224");
+	if (ofnode_valid(node)) {
+		gpio_request_by_name_nodev(node, "los", 0, &gpio, GPIOD_IS_IN);
+		dm_gpio_free(gpio.dev, &gpio);
+		gpio_request_by_name_nodev(node, "reset", 0, &gpio,
+					   GPIOD_IS_OUT);
+		if (dm_gpio_is_valid(&gpio)) {
+			/* Vitesse reset */
+			debug("%s: Setting GPIO 7 to 1\n", __func__);
+			dm_gpio_set_value(&gpio, 1);
+		}
+		dm_gpio_free(gpio.dev, &gpio);
+	}
+
+	/* SFP+ transmitters */
+	ofnode_for_each_compatible_node(node, "ethernet,sfp-slot") {
+		gpio_request_by_name_nodev(node, "tx_disable", 0,
+					   &gpio, GPIOD_IS_OUT);
+		if (dm_gpio_is_valid(&gpio)) {
+			debug("%s: Setting GPIO %d to 1\n", __func__,
+			      gpio.offset);
+			dm_gpio_set_value(&gpio, 1);
+		}
+		dm_gpio_free(gpio.dev, &gpio);
+		gpio_request_by_name_nodev(node, "mod_abs", 0, &gpio,
+					   GPIOD_IS_IN);
+		dm_gpio_free(gpio.dev, &gpio);
+		gpio_request_by_name_nodev(node, "tx_error", 0, &gpio,
+					   GPIOD_IS_IN);
+		dm_gpio_free(gpio.dev, &gpio);
+		gpio_request_by_name_nodev(node, "rx_los", 0, &gpio,
+					   GPIOD_IS_IN);
+		dm_gpio_free(gpio.dev, &gpio);
+	}
+
+	return 0;
+}
+
 void board_configure_qlms(void)
 {
 	octeon_configure_qlm(4, 3000, CVMX_QLM_MODE_SATA_2X1, 0, 0, 0, 0);
@@ -100,7 +147,45 @@ void board_configure_qlms(void)
 
 int board_late_init(void)
 {
+	struct gpio_desc gpio = {};
+	ofnode node;
+
+	/* Turn on SFP+ transmitters */
+	ofnode_for_each_compatible_node(node, "ethernet,sfp-slot") {
+		gpio_request_by_name_nodev(node, "tx_disable", 0,
+					   &gpio, GPIOD_IS_OUT);
+		if (dm_gpio_is_valid(&gpio)) {
+			debug("%s: Setting GPIO %d to 0\n", __func__,
+			      gpio.offset);
+			dm_gpio_set_value(&gpio, 0);
+		}
+		dm_gpio_free(gpio.dev, &gpio);
+	}
+
 	board_configure_qlms();
 
 	return 0;
 }
+
+int last_stage_init(void)
+{
+	struct gpio_desc gpio = {};
+	ofnode node;
+
+	node = ofnode_by_compatible(ofnode_null(), "vitesse,vsc7224");
+	if (!ofnode_valid(node)) {
+		printf("Vitesse SPF DT node not found!");
+		return 0;
+	}
+
+	gpio_request_by_name_nodev(node, "reset", 0, &gpio, GPIOD_IS_OUT);
+	if (dm_gpio_is_valid(&gpio)) {
+		/* Take Vitesse retimer out of reset */
+		debug("%s: Setting GPIO 7 to 0\n", __func__);
+		dm_gpio_set_value(&gpio, 0);
+		mdelay(50);
+	}
+	dm_gpio_free(gpio.dev, &gpio);
+
+	return 0;
+}
diff --git a/configs/octeon_nic23_defconfig b/configs/octeon_nic23_defconfig
index 1a1718a..3ab5838 100644
--- a/configs/octeon_nic23_defconfig
+++ b/configs/octeon_nic23_defconfig
@@ -14,13 +14,16 @@ CONFIG_ARCH_OCTEON=y
 CONFIG_TARGET_OCTEON_NIC23=y
 # CONFIG_MIPS_CACHE_SETUP is not set
 # CONFIG_MIPS_CACHE_DISABLE is not set
+CONFIG_MIPS_RELOCATION_TABLE_SIZE=0xc000
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
 CONFIG_OF_BOARD_FIXUP=y
 CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
 # CONFIG_SYS_DEVICE_NULLDEV is not set
 CONFIG_ARCH_MISC_INIT=y
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_LATE_INIT=y
+CONFIG_LAST_STAGE_INIT=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
@@ -37,6 +40,7 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_EFI_PARTITION=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_TFTP_TSIZE=y
 CONFIG_SATA=y
 CONFIG_AHCI_MVEBU=y
 CONFIG_CLK=y
@@ -50,7 +54,11 @@ CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
-# CONFIG_NETDEVICES is not set
+CONFIG_PHYLIB=y
+CONFIG_PHYLIB_10G=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_NET_OCTEON=y
 CONFIG_PCI=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y