Merge tag 'u-boot-imx-master-20240304' of https://gitlab.denx.de/u-boot/custodians/u-boot-imxWIP/04Mar2024

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/19817

- Fix i.MX93 OP-TEE support.
- Use the container image for i.MX93 revision A1.
- Fix display regression on opos6uldev.

13 files changed, 59 insertions, 25 deletions

diff --git a/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi b/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
index aa88964..3b52d6b 100644
--- a/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
+++ b/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
@@ -7,12 +7,6 @@
 
 #include "imx6ul-opos6ul-u-boot.dtsi"
 
-/ {
-	aliases {
-		display0 = &lcdif;
-	};
-};
-
 &aips1 {
 	bootph-pre-ram;
 
@@ -22,7 +16,29 @@
 };
 
 &lcdif {
+	display = <&display0>;
 	bootph-some-ram;
+
+	display0: display0 {
+		bits-per-pixel = <18>;
+		bus-width = <18>;
+
+		display-timings {
+			timing0 {
+				clock-frequency = <33300000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <36>;
+				hfront-porch = <210>;
+				vback-porch = <13>;
+				vfront-porch = <22>;
+				hsync-len = <10>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
 };
 
 &pinctrl_uart1 {
diff --git a/arch/arm/mach-imx/imx9/container.cfg b/arch/arm/mach-imx/imx9/container.cfg
index f268bc9..72fe791 100644
--- a/arch/arm/mach-imx/imx9/container.cfg
+++ b/arch/arm/mach-imx/imx9/container.cfg
@@ -7,4 +7,5 @@ BOOT_FROM SD 0x400
 SOC_TYPE IMX9
 CONTAINER
 IMAGE A55 bl31.bin 0x204E0000
-IMAGE A55 u-boot.bin CONFIG_TEXT_BASE
\ No newline at end of file
+IMAGE A55 u-boot.bin CONFIG_TEXT_BASE
+IMAGE A55 tee.bin 0x96000000
\ No newline at end of file
diff --git a/arch/arm/mach-imx/imx9/imximage.cfg b/arch/arm/mach-imx/imx9/imximage.cfg
index 3e44046..d327d6a 100644
--- a/arch/arm/mach-imx/imx9/imximage.cfg
+++ b/arch/arm/mach-imx/imx9/imximage.cfg
@@ -5,6 +5,6 @@
 
 BOOT_FROM SD 0x400
 SOC_TYPE IMX9
-APPEND mx93a0-ahab-container.img
+APPEND mx93a1-ahab-container.img
 CONTAINER
 IMAGE A55 u-boot-spl-ddr.bin 0x2049A000
\ No newline at end of file
diff --git a/board/armadeus/opos6uldev/opos6uldev.env b/board/armadeus/opos6uldev/opos6uldev.env
index f900297..2e7b659 100644
--- a/board/armadeus/opos6uldev/opos6uldev.env
+++ b/board/armadeus/opos6uldev/opos6uldev.env
@@ -24,7 +24,6 @@ mmcrootfstype=ext4 rootwait
 kernelimg=opos6ul-linux.bin
 splashpos=0,0
 splashimage=CONFIG_SYS_LOAD_ADDR
-videomode=video=ctfb:x:800,y:480,depth:18,pclk:33033,le:96,ri:96,up:20,lo:21,hs:64,vs:4,sync:0,vmode:0
 check_env=if test -n ${flash_env_version};
 	then env default env_version;
 	else env set flash_env_version ${env_version}; env save;
diff --git a/board/freescale/imx93_evk/spl.c b/board/freescale/imx93_evk/spl.c
index a98ed69..2fd5559 100644
--- a/board/freescale/imx93_evk/spl.c
+++ b/board/freescale/imx93_evk/spl.c
@@ -20,6 +20,7 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/mxc_i2c.h>
 #include <asm/arch-mx7ulp/gpio.h>
+#include <asm/mach-imx/ele_api.h>
 #include <asm/mach-imx/syscounter.h>
 #include <asm/sections.h>
 #include <dm/uclass.h>
@@ -43,6 +44,12 @@ int spl_board_boot_device(enum boot_device boot_dev_spl)
 
 void spl_board_init(void)
 {
+	int ret;
+
+	ret = ele_start_rng();
+	if (ret)
+		printf("Fail to start RNG: %d\n", ret);
+
 	puts("Normal Boot\n");
 }
 
diff --git a/board/phytec/phycore_imx93/spl.c b/board/phytec/phycore_imx93/spl.c
index dabc531..16303fc 100644
--- a/board/phytec/phycore_imx93/spl.c
+++ b/board/phytec/phycore_imx93/spl.c
@@ -11,6 +11,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/trdc.h>
 #include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/ele_api.h>
 #include <asm/sections.h>
 #include <hang.h>
 #include <init.h>
@@ -34,6 +35,12 @@ int spl_board_boot_device(enum boot_device boot_dev_spl)
 
 void spl_board_init(void)
 {
+	int ret;
+
+	ret = ele_start_rng();
+	if (ret)
+		printf("Fail to start RNG: %d\n", ret);
+
 	puts("Normal Boot\n");
 }
 
diff --git a/board/variscite/imx93_var_som/spl.c b/board/variscite/imx93_var_som/spl.c
index e6db4eb..36e1721 100644
--- a/board/variscite/imx93_var_som/spl.c
+++ b/board/variscite/imx93_var_som/spl.c
@@ -20,6 +20,7 @@
 #include <asm/mach-imx/mxc_i2c.h>
 #include <asm/arch-mx7ulp/gpio.h>
 #include <asm/sections.h>
+#include <asm/mach-imx/ele_api.h>
 #include <asm/mach-imx/syscounter.h>
 #include <dm/uclass.h>
 #include <dm/device.h>
@@ -47,9 +48,14 @@ int spl_board_boot_device(enum boot_device boot_dev_spl)
 void spl_board_init(void)
 {
 	struct var_eeprom *ep = VAR_EEPROM_DATA;
+	int ret;
 
 	puts("Normal Boot\n");
 
+	ret = ele_start_rng();
+	if (ret)
+		printf("Fail to start RNG: %d\n", ret);
+
 	/* Copy EEPROM contents to DRAM */
 	memcpy(ep, &eeprom, sizeof(*ep));
 }
diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig
index e1884df..7d21a6fe 100644
--- a/configs/opos6uldev_defconfig
+++ b/configs/opos6uldev_defconfig
@@ -115,13 +115,10 @@ CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_VIDEO=y
 CONFIG_VIDEO_LOGO=y
-# CONFIG_VIDEO_BPP8 is not set
-# CONFIG_VIDEO_BPP32 is not set
 CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_MXS=y
 CONFIG_SPLASH_SCREEN=y
 CONFIG_SPLASH_SCREEN_ALIGN=y
-CONFIG_SPLASH_SOURCE=y
 CONFIG_BMP_16BPP=y
 CONFIG_BMP_24BPP=y
 CONFIG_BMP_32BPP=y
diff --git a/doc/board/nxp/imx93_11x11_evk.rst b/doc/board/nxp/imx93_11x11_evk.rst
index fb0ecf8..171645a 100644
--- a/doc/board/nxp/imx93_11x11_evk.rst
+++ b/doc/board/nxp/imx93_11x11_evk.rst
@@ -42,10 +42,10 @@ Get ahab-container.img
 
 .. code-block:: bash
 
-   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.10.bin
-   $ chmod +x firmware-sentinel-0.10.bin
-   $ ./firmware-sentinel-0.10.bin
-   $ cp firmware-sentinel-0.10/mx93a0-ahab-container.img $(srctree)
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.11.bin
+   $ chmod +x firmware-sentinel-0.11.bin
+   $ ./firmware-sentinel-0.11.bin
+   $ cp firmware-sentinel-0.11/mx93a1-ahab-container.img $(srctree)
 
 Build U-Boot
 ------------
diff --git a/doc/board/phytec/imx93-phyboard-segin.rst b/doc/board/phytec/imx93-phyboard-segin.rst
index da8772e..ce17fbe 100644
--- a/doc/board/phytec/imx93-phyboard-segin.rst
+++ b/doc/board/phytec/imx93-phyboard-segin.rst
@@ -41,10 +41,10 @@ Get ahab-container.img
 
 .. code-block:: bash
 
-   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.10.bin
-   $ chmod +x firmware-sentinel-0.10.bin
-   $ ./firmware-sentinel-0.10.bin
-   $ cp firmware-sentinel-0.10/mx93a0-ahab-container.img $(srctree)
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.11.bin
+   $ chmod +x firmware-sentinel-0.11.bin
+   $ ./firmware-sentinel-0.11.bin
+   $ cp firmware-sentinel-0.11/mx93a1-ahab-container.img $(srctree)
 
 Build U-Boot
 ------------
diff --git a/doc/board/variscite/imx93_var_som.rst b/doc/board/variscite/imx93_var_som.rst
index 4951afd..02309f2 100644
--- a/doc/board/variscite/imx93_var_som.rst
+++ b/doc/board/variscite/imx93_var_som.rst
@@ -42,10 +42,10 @@ Get ahab-container.img
 
 .. code-block:: bash
 
-   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.10.bin
-   $ chmod +x firmware-sentinel-0.10.bin
-   $ ./firmware-sentinel-0.10.bin
-   $ cp firmware-sentinel-0.10/mx93a0-ahab-container.img $(srctree)
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.11.bin
+   $ chmod +x firmware-sentinel-0.11.bin
+   $ ./firmware-sentinel-0.11.bin
+   $ cp firmware-sentinel-0.11/mx93a1-ahab-container.img $(srctree)
 
 Build U-Boot
 ------------
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 1043394..515363f 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -387,6 +387,7 @@ static int mxs_video_remove(struct udevice *dev)
 static const struct udevice_id mxs_video_ids[] = {
 	{ .compatible = "fsl,imx23-lcdif" },
 	{ .compatible = "fsl,imx28-lcdif" },
+	{ .compatible = "fsl,imx6sx-lcdif" },
 	{ .compatible = "fsl,imx7ulp-lcdif" },
 	{ .compatible = "fsl,imxrt-lcdif" },
 	{ /* sentinel */ }
diff --git a/tools/imx9_image.sh b/tools/imx9_image.sh
index 88dfcfe..ca78a57 100755
--- a/tools/imx9_image.sh
+++ b/tools/imx9_image.sh
@@ -19,7 +19,7 @@ for f in $blobs; do
 	fi
 
 	if [ ! -f $tmp ]; then
-		echo "WARNING '$tmp' not found, resulting binary is not-functional" >&2
+		echo "WARNING '$tmp' not found, resulting binary may be not-functional" >&2
 
                 # Comment-out the lines for un-existing files. This way,
                 # mkimage can keep working. This allows CI tests to pass even