Merge branch '2022-08-31-assorted-fixes'

- Assorted bugfixes including re-working the i2c command CVE and fixing
  some TI reference platforms with different EEPROMs.

14 files changed, 57 insertions, 429 deletions

diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 5592862..cebd76d 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-# Grab our configured image.  The source for this is found at:
-# https://source.denx.de/u-boot/gitlab-ci-runner
+# Grab our configured image.  The source for this is found
+# in the u-boot tree at tools/docker/Dockerfile
 image: trini/u-boot-gitlab-ci-runner:jammy-20220801-09Aug2022
 
 # We run some tests in different order, to catch some failures quicker.
diff --git a/arch/arm/lib/semihosting.c b/arch/arm/lib/semihosting.c
index dbea2b0..01d652a 100644
--- a/arch/arm/lib/semihosting.c
+++ b/arch/arm/lib/semihosting.c
@@ -32,12 +32,12 @@ static noinline long smh_trap(unsigned int sysnum, void *addr)
 {
 	register long result asm("r0");
 #if defined(CONFIG_ARM64)
-	asm volatile ("hlt #0xf000" : "=r" (result) : "0"(sysnum), "r"(addr));
+	asm volatile ("hlt #0xf000" : "=r" (result) : "0"(sysnum), "r"(addr) : "memory");
 #elif defined(CONFIG_CPU_V7M)
-	asm volatile ("bkpt #0xAB" : "=r" (result) : "0"(sysnum), "r"(addr));
+	asm volatile ("bkpt #0xAB" : "=r" (result) : "0"(sysnum), "r"(addr) : "memory");
 #else
 	/* Note - untested placeholder */
-	asm volatile ("svc #0x123456" : "=r" (result) : "0"(sysnum), "r"(addr));
+	asm volatile ("svc #0x123456" : "=r" (result) : "0"(sysnum), "r"(addr) : "memory");
 #endif
 	return result;
 }
diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c
index ed34991..9fa7b7b 100644
--- a/board/ti/common/board_detect.c
+++ b/board/ti/common/board_detect.c
@@ -86,7 +86,6 @@ __weak void gpi2c_init(void)
 static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
 					    u32 header, u32 size, uint8_t *ep)
 {
-	u32 hdr_read = 0xdeadbeef;
 	int rc;
 
 #if CONFIG_IS_ENABLED(DM_I2C)
@@ -113,10 +112,10 @@ static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
 	 * We must allow for fall through to check the data if 2 byte
 	 * addressing works
 	 */
-	(void)dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
+	(void)dm_i2c_read(dev, 0, ep, size);
 
 	/* Corrupted data??? */
-	if (hdr_read != header) {
+	if (*((u32 *)ep) != header) {
 		/*
 		 * read the eeprom header using i2c again, but use only a
 		 * 2 byte address (some newer boards need this..)
@@ -125,16 +124,12 @@ static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
 		if (rc)
 			return rc;
 
-		rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
+		rc = dm_i2c_read(dev, 0, ep, size);
 		if (rc)
 			return rc;
 	}
-	if (hdr_read != header)
+	if (*((u32 *)ep) != header)
 		return -1;
-
-	rc = dm_i2c_read(dev, 0, ep, size);
-	if (rc)
-		return rc;
 #else
 	u32 byte;
 
@@ -154,26 +149,21 @@ static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
 	 * We must allow for fall through to check the data if 2 byte
 	 * addressing works
 	 */
-	(void)i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
+	(void)i2c_read(dev_addr, 0x0, byte, ep, size);
 
 	/* Corrupted data??? */
-	if (hdr_read != header) {
+	if (*((u32 *)ep) != header) {
 		/*
 		 * read the eeprom header using i2c again, but use only a
 		 * 2 byte address (some newer boards need this..)
 		 */
 		byte = 2;
-		rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read,
-			      4);
+		rc = i2c_read(dev_addr, 0x0, byte, ep, size);
 		if (rc)
 			return rc;
 	}
-	if (hdr_read != header)
+	if (*((u32 *)ep) != header)
 		return -1;
-
-	rc = i2c_read(dev_addr, 0x0, byte, ep, size);
-	if (rc)
-		return rc;
 #endif
 	return 0;
 }
diff --git a/boot/bootm.c b/boot/bootm.c
index 86dbfbc..e3233fd 100644
--- a/boot/bootm.c
+++ b/boot/bootm.c
@@ -305,9 +305,9 @@ int bootm_find_images(int flag, int argc, char *const argv[], ulong start,
 	/* check if FDT overlaps OS image */
 	if (images.ft_addr &&
 	    (((ulong)images.ft_addr >= start &&
-	      (ulong)images.ft_addr <= start + size) ||
+	      (ulong)images.ft_addr < start + size) ||
 	     ((ulong)images.ft_addr + images.ft_len >= start &&
-	      (ulong)images.ft_addr + images.ft_len <= start + size))) {
+	      (ulong)images.ft_addr + images.ft_len < start + size))) {
 		printf("ERROR: FDT image overlaps OS image (OS=0x%lx..0x%lx)\n",
 		       start, start + size);
 		return 1;
@@ -1006,7 +1006,7 @@ static int bootm_host_load_image(const void *fit, int req_image_type,
 	int noffset;
 	ulong load_end, buf_size;
 	uint8_t image_type;
-	uint8_t imape_comp;
+	uint8_t image_comp;
 	void *load_buf;
 	int ret;
 
@@ -1024,20 +1024,18 @@ static int bootm_host_load_image(const void *fit, int req_image_type,
 		return -EINVAL;
 	}
 
-	if (fit_image_get_comp(fit, noffset, &imape_comp)) {
-		puts("Can't get image compression!\n");
-		return -EINVAL;
-	}
+	if (fit_image_get_comp(fit, noffset, &image_comp))
+		image_comp = IH_COMP_NONE;
 
 	/* Allow the image to expand by a factor of 4, should be safe */
 	buf_size = (1 << 20) + len * 4;
 	load_buf = malloc(buf_size);
-	ret = image_decomp(imape_comp, 0, data, image_type, load_buf,
+	ret = image_decomp(image_comp, 0, data, image_type, load_buf,
 			   (void *)data, len, buf_size, &load_end);
 	free(load_buf);
 
 	if (ret) {
-		ret = handle_decomp_error(imape_comp, load_end - 0, buf_size, ret);
+		ret = handle_decomp_error(image_comp, load_end - 0, buf_size, ret);
 		if (ret != BOOTM_ERR_UNIMPLEMENTED)
 			return ret;
 	}
diff --git a/boot/image-fit.c b/boot/image-fit.c
index df3e5df..21dbd05 100644
--- a/boot/image-fit.c
+++ b/boot/image-fit.c
@@ -477,7 +477,7 @@ void fit_print_contents(const void *fit)
 void fit_image_print(const void *fit, int image_noffset, const char *p)
 {
 	char *desc;
-	uint8_t type, arch, os, comp;
+	uint8_t type, arch, os, comp = IH_COMP_NONE;
 	size_t size;
 	ulong load, entry;
 	const void *data;
@@ -794,7 +794,6 @@ int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp)
 	data = fdt_getprop(fit, noffset, FIT_COMP_PROP, &len);
 	if (data == NULL) {
 		fit_get_debug(fit, noffset, FIT_COMP_PROP, len);
-		*comp = -1;
 		return -1;
 	}
 
diff --git a/cmd/i2c.c b/cmd/i2c.c
index bd04b14..e196a73 100644
--- a/cmd/i2c.c
+++ b/cmd/i2c.c
@@ -200,10 +200,10 @@ void i2c_init_board(void)
  *
  * Returns the address length.
  */
-static uint get_alen(char *arg, uint default_len)
+static uint get_alen(char *arg, int default_len)
 {
-	uint	j;
-	uint	alen;
+	int	j;
+	int	alen;
 
 	alen = default_len;
 	for (j = 0; j < 8; j++) {
@@ -247,7 +247,7 @@ static int do_i2c_read(struct cmd_tbl *cmdtp, int flag, int argc,
 {
 	uint	chip;
 	uint	devaddr, length;
-	uint	alen;
+	int alen;
 	u_char  *memaddr;
 	int ret;
 #if CONFIG_IS_ENABLED(DM_I2C)
@@ -301,7 +301,7 @@ static int do_i2c_write(struct cmd_tbl *cmdtp, int flag, int argc,
 {
 	uint	chip;
 	uint	devaddr, length;
-	uint	alen;
+	int alen;
 	u_char  *memaddr;
 	int ret;
 #if CONFIG_IS_ENABLED(DM_I2C)
@@ -469,8 +469,9 @@ static int do_i2c_md(struct cmd_tbl *cmdtp, int flag, int argc,
 {
 	uint	chip;
 	uint	addr, length;
-	uint	alen;
-	uint	j, nbytes, linebytes;
+	int alen;
+	int j;
+	uint nbytes, linebytes;
 	int ret;
 #if CONFIG_IS_ENABLED(DM_I2C)
 	struct udevice *dev;
@@ -589,9 +590,9 @@ static int do_i2c_mw(struct cmd_tbl *cmdtp, int flag, int argc,
 {
 	uint	chip;
 	ulong	addr;
-	uint	alen;
+	int	alen;
 	uchar	byte;
-	uint	count;
+	int	count;
 	int ret;
 #if CONFIG_IS_ENABLED(DM_I2C)
 	struct udevice *dev;
@@ -676,8 +677,8 @@ static int do_i2c_crc(struct cmd_tbl *cmdtp, int flag, int argc,
 {
 	uint	chip;
 	ulong	addr;
-	uint	alen;
-	uint	count;
+	int	alen;
+	int	count;
 	uchar	byte;
 	ulong	crc;
 	ulong	err;
@@ -985,7 +986,7 @@ static int do_i2c_loop(struct cmd_tbl *cmdtp, int flag, int argc,
 		       char *const argv[])
 {
 	uint	chip;
-	uint	alen;
+	int alen;
 	uint	addr;
 	uint	length;
 	u_char	bytes[16];
diff --git a/cmd/ximg.c b/cmd/ximg.c
index 65ba413..f84141f 100644
--- a/cmd/ximg.c
+++ b/cmd/ximg.c
@@ -171,11 +171,8 @@ do_imgextract(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 			return 1;
 		}
 
-		if (fit_image_get_comp(fit_hdr, noffset, &comp)) {
-			puts("Could not find script subimage "
-				"compression type\n");
-			return 1;
-		}
+		if (fit_image_get_comp(fit_hdr, noffset, &comp))
+			comp = IH_COMP_NONE;
 
 		data = (ulong)fit_data;
 		len = (ulong)fit_len;
diff --git a/common/console.c b/common/console.c
index bde9412..e783f30 100644
--- a/common/console.c
+++ b/common/console.c
@@ -600,6 +600,9 @@ static void pre_console_putc(const char c)
 {
 	char *buffer;
 
+	if (gd->precon_buf_idx < 0)
+		return;
+
 	buffer = map_sysmem(CONFIG_VAL(PRE_CON_BUF_ADDR), CONFIG_VAL(PRE_CON_BUF_SZ));
 
 	buffer[CIRC_BUF_IDX(gd->precon_buf_idx++)] = c;
@@ -609,13 +612,16 @@ static void pre_console_putc(const char c)
 
 static void pre_console_puts(const char *s)
 {
+	if (gd->precon_buf_idx < 0)
+		return;
+
 	while (*s)
 		pre_console_putc(*s++);
 }
 
 static void print_pre_console_buffer(int flushpoint)
 {
-	unsigned long in = 0, out = 0;
+	long in = 0, out = 0;
 	char buf_out[CONFIG_VAL(PRE_CON_BUF_SZ) + 1];
 	char *buf_in;
 
@@ -632,6 +638,7 @@ static void print_pre_console_buffer(int flushpoint)
 
 	buf_out[out] = 0;
 
+	gd->precon_buf_idx = -1;
 	switch (flushpoint) {
 	case PRE_CONSOLE_FLUSHPOINT1_SERIAL:
 		puts(buf_out);
@@ -640,6 +647,7 @@ static void print_pre_console_buffer(int flushpoint)
 		console_puts_select(stdout, false, buf_out);
 		break;
 	}
+	gd->precon_buf_idx = in;
 }
 #else
 static inline void pre_console_putc(const char c) {}
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 7715c40..cd6060d 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -48,7 +48,7 @@ config SPL_AHCI_PCI
 	bool "Support for PCI-based AHCI controller for SPL"
 	depends on SPL
 	depends on SPL_PCI
-	depends on SPL_SATA_SUPPORT && DM_SCSI
+	depends on SPL_SATA && DM_SCSI
 
 config DWC_AHCI
 	bool "Enable Synopsys DWC AHCI driver support"
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 805a6fd..2a747d91 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -115,10 +115,14 @@ struct global_data {
 	/**
 	 * @precon_buf_idx: pre-console buffer index
 	 *
-	 * @precon_buf_idx indicates the current position of the buffer used to
-	 * collect output before the console becomes available
-	 */
-	unsigned long precon_buf_idx;
+	 * @precon_buf_idx indicates the current position of the
+	 * buffer used to collect output before the console becomes
+	 * available. When negative, the pre-console buffer is
+	 * temporarily disabled (used when the pre-console buffer is
+	 * being written out, to prevent adding its contents to
+	 * itself).
+	 */
+	long precon_buf_idx;
 #endif
 	/**
 	 * @env_addr: address of environment structure
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
deleted file mode 100644
index 7e65b2b..0000000
--- a/include/configs/corenet_ds.h
+++ /dev/null
@@ -1,369 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2009-2012 Freescale Semiconductor, Inc.
- * Copyright 2020-2021 NXP
- */
-
-/*
- * Corenet DS style board configuration file
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-#include "../board/freescale/common/ics307_clk.h"
-
-#ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
-#define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
-#endif
-
-#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
-/* Set 1M boot space */
-#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
-#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
-		(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
-#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
-#endif
-
-/* High Level Configuration Options */
-
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
-#endif
-
-#define CONFIG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_SYS_INIT_L2CSR0		L2CSR0_L2E
-#ifdef CONFIG_DDR_ECC
-#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
-#endif
-
-#define CONFIG_POST CONFIG_SYS_POST_MEMORY	/* test POST memory test */
-
-/*
- *  Config the L3 Cache as L3 SRAM
- */
-#define CONFIG_SYS_INIT_L3_ADDR		CONFIG_RAMBOOT_TEXT_BASE
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_INIT_L3_ADDR_PHYS	(0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
-#else
-#define CONFIG_SYS_INIT_L3_ADDR_PHYS	CONFIG_SYS_INIT_L3_ADDR
-#endif
-#define CONFIG_SYS_L3_SIZE		(1024 << 10)
-#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
-
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_DCSRBAR		0xf0000000
-#define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
-#endif
-
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
-
-/*
- * DDR Setup
- */
-#define CONFIG_VERY_BIG_RAM
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-
-#define SPD_EEPROM_ADDRESS1	0x51
-#define SPD_EEPROM_ADDRESS2	0x52
-#define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1	/* for p3041/p5010 */
-#define CONFIG_SYS_SDRAM_SIZE	4096	/* for fixed parameter use */
-
-/*
- * Local Bus Definitions
- */
-
-/* Set the local bus clock 1/8 of platform clock */
-#define CONFIG_SYS_LBC_LCRR		LCRR_CLKDIV_8
-
-#define CONFIG_SYS_FLASH_BASE		0xe0000000	/* Start of PromJet */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_FLASH_BASE_PHYS	0xfe0000000ull
-#else
-#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
-#endif
-
-#define PIXIS_BASE		0xffdf0000	/* PIXIS registers */
-#ifdef CONFIG_PHYS_64BIT
-#define PIXIS_BASE_PHYS		0xfffdf0000ull
-#else
-#define PIXIS_BASE_PHYS		PIXIS_BASE
-#endif
-
-#define PIXIS_LBMAP_SWITCH	7
-#define PIXIS_LBMAP_MASK	0xf0
-#define PIXIS_LBMAP_SHIFT	4
-#define PIXIS_LBMAP_ALTBANK	0x40
-
-#define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
-
-/* Nand Flash */
-#ifdef CONFIG_NAND_FSL_ELBC
-#define CONFIG_SYS_NAND_BASE		0xffa00000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_NAND_BASE_PHYS	0xfffa00000ull
-#else
-#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
-#endif
-
-#define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-/* NAND flash config */
-#define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
-			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
-			       | BR_PS_8	       /* Port Size = 8 bit */ \
-			       | BR_MS_FCM	       /* MSEL = FCM */ \
-			       | BR_V)		       /* valid */
-#define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000	      /* length 256K */ \
-			       | OR_FCM_PGS	       /* Large Page*/ \
-			       | OR_FCM_CSCT \
-			       | OR_FCM_CST \
-			       | OR_FCM_CHT \
-			       | OR_FCM_SCY_1 \
-			       | OR_FCM_TRLX \
-			       | OR_FCM_EHTR)
-#endif /* CONFIG_NAND_FSL_ELBC */
-
-#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
-
-#define CONFIG_HWCONFIG
-
-/* define to use L1 as initial stack */
-#define CONFIG_L1_INIT_RAM
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
-/* The assembler doesn't like typecast */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
-	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
-	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
-#else
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS	CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
-#endif
-#define CONFIG_SYS_INIT_RAM_SIZE		0x00004000	/* Size of used area in RAM */
-
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
-
-/* Serial Port - controlled on board with jumper J8
- * open - index 2
- * shorted - index 1
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x11C500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x11C600)
-#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR+0x11D500)
-#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)
-
-/* I2C */
-
-/*
- * RapidIO
- */
-#define CONFIG_SYS_SRIO1_MEM_VIRT	0xa0000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_SRIO1_MEM_PHYS	0xc20000000ull
-#else
-#define CONFIG_SYS_SRIO1_MEM_PHYS	0xa0000000
-#endif
-#define CONFIG_SYS_SRIO1_MEM_SIZE	0x10000000	/* 256M */
-
-#define CONFIG_SYS_SRIO2_MEM_VIRT	0xb0000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_SRIO2_MEM_PHYS	0xc30000000ull
-#else
-#define CONFIG_SYS_SRIO2_MEM_PHYS	0xb0000000
-#endif
-#define CONFIG_SYS_SRIO2_MEM_SIZE	0x10000000	/* 256M */
-
-/*
- * for slave u-boot IMAGE instored in master memory space,
- * PHYS must be aligned based on the SIZE
- */
-#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
-#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
-#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000	/* 1M */
-#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
-/*
- * for slave UCODE and ENV instored in master memory space,
- * PHYS must be aligned based on the SIZE
- */
-#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
-#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
-#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000	/* 256K */
-
-/* slave core release by master*/
-#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
-#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
-
-/*
- * SRIO_PCIE_BOOT - SLAVE
- */
-#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
-#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
-#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
-		(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
-#endif
-
-/*
- * eSPI - Enhanced SPI
- */
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-
-/* controller 1, direct to uli, tgtid 3, Base address 20000 */
-#define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
-#define CONFIG_SYS_PCIE1_IO_VIRT	0xf8000000
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xff8000000ull
-
-/* controller 2, Slot 2, tgtid 2, Base address 201000 */
-#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
-#define CONFIG_SYS_PCIE2_IO_VIRT	0xf8010000
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xff8010000ull
-
-/* controller 3, Slot 1, tgtid 1, Base address 202000 */
-#define CONFIG_SYS_PCIE3_MEM_VIRT	0xc0000000
-#define CONFIG_SYS_PCIE3_MEM_PHYS	0xc40000000ull
-#define CONFIG_SYS_PCIE3_IO_VIRT	0xf8020000
-#define CONFIG_SYS_PCIE3_IO_PHYS	0xff8020000ull
-
-/* controller 4, Base address 203000 */
-#define CONFIG_SYS_PCIE4_MEM_PHYS	0xc60000000ull
-#define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
-
-/* Qman/Bman */
-#define CONFIG_SYS_BMAN_NUM_PORTALS	10
-#define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
-#else
-#define CONFIG_SYS_BMAN_MEM_PHYS	CONFIG_SYS_BMAN_MEM_BASE
-#endif
-#define CONFIG_SYS_BMAN_MEM_SIZE	0x00200000
-#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
-#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
-#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
-#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
-					CONFIG_SYS_BMAN_CENA_SIZE)
-#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_BMAN_SWP_ISDR_REG	0xE08
-#define CONFIG_SYS_QMAN_NUM_PORTALS	10
-#define CONFIG_SYS_QMAN_MEM_BASE	0xf4200000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_QMAN_MEM_PHYS	0xff4200000ull
-#else
-#define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
-#endif
-#define CONFIG_SYS_QMAN_MEM_SIZE	0x00200000
-#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
-#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
-#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
-#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
-					CONFIG_SYS_QMAN_CENA_SIZE)
-#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
-
-#define CONFIG_SYS_DPAA_FMAN
-#define CONFIG_SYS_DPAA_PME
-
-#ifdef CONFIG_FMAN_ENET
-#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR	0x1c
-#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR	0x1d
-#define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR	0x1e
-#define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR	0x1f
-#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR	4
-
-#define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR	0x1c
-#define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR	0x1d
-#define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR	0x1e
-#define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR	0x1f
-#define CONFIG_SYS_FM2_10GEC1_PHY_ADDR	0
-
-#define CONFIG_SYS_TBIPA_VALUE	8
-#endif
-
-/*
- * Environment
- */
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
-
-/*
- * Environment Configuration
- */
-#define CONFIG_ROOTPATH		"/opt/nfsroot"
-#define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */
-
-#ifdef CONFIG_TARGET_P4080DS
-#define __USB_PHY_TYPE	ulpi
-#else
-#define __USB_PHY_TYPE	utmi
-#endif
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"hwconfig=fsl_ddr:ctlr_intlv=cacheline,"		\
-	"bank_intlv=cs0_cs1;"					\
-	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
-	"usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
-	"netdev=eth0\0"						\
-	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
-	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"	\
-	"tftpflash=tftpboot $loadaddr $uboot && "		\
-	"protect off $ubootaddr +$filesize && "			\
-	"erase $ubootaddr +$filesize && "			\
-	"cp.b $loadaddr $ubootaddr $filesize && "		\
-	"protect on $ubootaddr +$filesize && "			\
-	"cmp.b $loadaddr $ubootaddr $filesize\0"		\
-	"consoledev=ttyS0\0"					\
-	"ramdiskaddr=2000000\0"					\
-	"ramdiskfile=p4080ds/ramdisk.uboot\0"			\
-	"fdtaddr=1e00000\0"					\
-	"fdtfile=p4080ds/p4080ds.dtb\0"				\
-	"bdev=sda3\0"
-
-#include <asm/fsl_secure_boot.h>
-
-#endif	/* __CONFIG_H */
diff --git a/include/fs.h b/include/fs.h
index 2195dc1..8370d88 100644
--- a/include/fs.h
+++ b/include/fs.h
@@ -46,7 +46,7 @@ int do_fat_fsload(struct cmd_tbl *cmdtp, int flag, int argc,
 int do_ext2load(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
 
 /*
- * Tell the fs layer which block device an partition to use for future
+ * Tell the fs layer which block device and partition to use for future
  * commands. This also internally identifies the filesystem that is present
  * within the partition. The identification process may be limited to a
  * specific filesystem type by passing FS_* in the fstype parameter.
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index 69983a1..7624304 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -89,7 +89,7 @@ hostcxx_flags  = -Wp,-MD,$(depfile) $(__hostcxx_flags)
 # Create executable from a single .c file
 # host-csingle -> Executable
 quiet_cmd_host-csingle 	= HOSTCC  $@
-      cmd_host-csingle	= $(HOSTCC) $(hostc_flags) -o $@ $< \
+      cmd_host-csingle	= $(HOSTCC) $(hostc_flags) $(KBUILD_HOSTLDFLAGS) -o $@ $< \
 	  	$(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(@F))
 $(host-csingle): $(obj)/%: $(src)/%.c FORCE
 	$(call if_changed_dep,host-csingle)
diff --git a/tools/sunxi_toc0.c b/tools/sunxi_toc0.c
index 56200bd..7a8d74b 100644
--- a/tools/sunxi_toc0.c
+++ b/tools/sunxi_toc0.c
@@ -34,7 +34,7 @@
 #define pr_warn(fmt, args...)	fprintf(stderr, pr_fmt(fmt), "warning", ##args)
 #define pr_info(fmt, args...)	fprintf(stderr, pr_fmt(fmt), "info", ##args)
 
-#if defined(LIBRESSL_VERSION_NUMBER)
+#if defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x3050000fL
 #define RSA_get0_n(key) (key)->n
 #define RSA_get0_e(key) (key)->e
 #define RSA_get0_d(key) (key)->d