aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorWolfgang Denk <wd@pollux.denx.de>2005-08-03 22:32:02 +0200
committerWolfgang Denk <wd@pollux.denx.de>2005-08-03 22:32:02 +0200
commitdc17fb6dc2ea1965fc0a14674833643af678ec6f (patch)
treec85097368c95e894481b5c988716ebf22480192d
parentd3b86c496d8f45eddf8fb9ee1fd11418af406e66 (diff)
downloadu-boot-dc17fb6dc2ea1965fc0a14674833643af678ec6f.zip
u-boot-dc17fb6dc2ea1965fc0a14674833643af678ec6f.tar.gz
u-boot-dc17fb6dc2ea1965fc0a14674833643af678ec6f.tar.bz2
Cleanup build problems (on Fedora Core x86_64 build host)
-rw-r--r--CHANGELOG2
-rw-r--r--MAINTAINERS152
-rw-r--r--Makefile7
-rw-r--r--board/amcc/yellowstone/flash.c3
-rw-r--r--board/amcc/yellowstone/yellowstone.c4
-rw-r--r--common/environment.c5
-rw-r--r--include/configs/Yukon8220.h317
-rw-r--r--tools/envcrc.c37
8 files changed, 425 insertions, 102 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 343080c..6d3bb93 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
Changes for U-Boot 1.1.3:
======================================================================
+* Cleanup build problems on 64 bit build hosts
+
* Update MAINTAINERS file
* Patch by Stefan Roese, 01 Aug 2005:
diff --git a/MAINTAINERS b/MAINTAINERS
index 0bcad8e..0fff4f6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -129,6 +129,34 @@ Thomas Frieden <ThomasF@hyperion-entertainment.com>
AmigaOneG3SE MPC7xx
+Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+ ADCIOP IOP480 (PPC401)
+ APC405 PPC405GP
+ AR405 PPC405GP
+ ASH405 PPC405EP
+ CANBT PPC405CR
+ CPCI405 PPC405GP
+ CPCI4052 PPC405GP
+ CPCI405AB PPC405GP
+ CPCI405DT PPC405GP
+ CPCI440 PPC440GP
+ CPCIISER4 PPC405GP
+ DASA_SIM IOP480 (PPC401)
+ DP405 PPC405EP
+ DU405 PPC405GP
+ G2000 PPC405EP
+ HH405 PPC405EP
+ HUB405 PPC405EP
+ OCRTC PPC405GP
+ ORSG PPC405GP
+ PCI405 PPC405GP
+ PLU405 PPC405EP
+ PMC405 PPC405GP
+ VOH405 PPC405EP
+ VOM405 PPC405EP
+ WUH405 PPC405EP
+
Frank Gottschling <fgottschling@eltec.de>
MHPC MPC8xx
@@ -168,10 +196,6 @@ Sangmoon Kim <dogoil@etinsys.com>
debris MPC8245
-Nye Liu <nyet@zumanetworks.com>
-
- ZUMA MPC7xx_74xx
-
Thomas Lange <thomas@corelatus.se>
GTH MPC860
@@ -180,6 +204,21 @@ The LEOX team <team@leox.org>
ELPT860 MPC860T
+Nye Liu <nyet@zumanetworks.com>
+
+ ZUMA MPC7xx_74xx
+
+Jon Loeliger <jdl@freescale.com>
+
+ MPC8540ADS MPC8540
+ MPC8560ADS MPC8560
+ MPC8541CDS MPC8541
+ MPC8555CDS MPC8555
+
+Dan Malek <dan@embeddededge.com>
+
+ STxGP3 MPC85xx
+
Eran Man <eran@nbase.co.il>
EVB64260_750CX MPC750CX
@@ -194,6 +233,7 @@ Reinhard Meyer <r.meyer@emk-elektronik.de>
TOP5200 MPC5200
Tolunay Orkun <torkun@nextio.com>
+
csb272 PPC405GP
csb472 PPC405GP
@@ -202,17 +242,6 @@ Keith Outwater <Keith_Outwater@mvis.com>
GEN860T MPC860T
GEN860T_SC MPC860T
-Stefan Roese <sr@denx.de>
-
- bamboo PPC440EP
- bunbinga PPC405EP
- ebony PPC440GP
- ocotea PPC440GX
- sycamore PPC405GPr
- walnut PPC405GP
- yellowstone PPC440GR
- yosemite PPC440EP
-
Frank Panno <fpanno@delphintech.com>
ep8260 MPC8260
@@ -234,33 +263,20 @@ Daniel Poirot <dan.poirot@windriver.com>
sbc8240 MPC8240
sbc405 PPC405GP
-Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Stefan Roese <sr@denx.de>
- ADCIOP IOP480 (PPC401)
- APC405 PPC405GP
- AR405 PPC405GP
- ASH405 PPC405EP
- CANBT PPC405CR
- CPCI405 PPC405GP
- CPCI4052 PPC405GP
- CPCI405AB PPC405GP
- CPCI405DT PPC405GP
- CPCI440 PPC440GP
- CPCIISER4 PPC405GP
- DASA_SIM IOP480 (PPC401)
- DP405 PPC405EP
- DU405 PPC405GP
- G2000 PPC405EP
- HH405 PPC405EP
- HUB405 PPC405EP
- OCRTC PPC405GP
- ORSG PPC405GP
- PCI405 PPC405GP
- PLU405 PPC405EP
- PMC405 PPC405GP
- VOH405 PPC405EP
- VOM405 PPC405EP
- WUH405 PPC405EP
+ bamboo PPC440EP
+ bunbinga PPC405EP
+ ebony PPC440GP
+ ocotea PPC440GX
+ sycamore PPC405GPr
+ walnut PPC405GP
+ yellowstone PPC440GR
+ yosemite PPC440EP
+
+Yusdi Santoso <yusdi_santoso@adaptec.com>
+
+ HIDDEN_DRAGON MPC8241/MPC8245
Travis Sawyer (travis.sawyer@sandburst.com>
@@ -297,21 +313,6 @@ John Zhan <zhanz@sinovee.com>
svm_sc8xx MPC8xx
-Jon Loeliger <jdl@freescale.com>
-
- MPC8540ADS MPC8540
- MPC8560ADS MPC8560
- MPC8541CDS MPC8541
- MPC8555CDS MPC8555
-
-Dan Malek <dan@embeddededge.com>
-
- STxGP3 MPC85xx
-
-Yusdi Santoso <yusdi_santoso@adaptec.com>
-
- HIDDEN_DRAGON MPC8241/MPC8245
-
-------------------------------------------------------------------------
Unknown / orphaned boards:
@@ -346,6 +347,10 @@ Unknown / orphaned boards:
# Board CPU #
#########################################################################
+Rishi Bhattacharya <rishi@ti.com>
+
+ omap5912osk ARM926EJS
+
George G. Davis <gdavis@mvista.com>
assabet SA1100
@@ -364,6 +369,11 @@ Marius Gröger <mag@sysgo.de>
impa7 ARM720T (EP7211)
ep7312 ARM720T (EP7312)
+Kshitij Gupta <kshitij@ti.com>
+
+ omap1510inn ARM925T
+ omap1610inn ARM926EJS
+
Kyle Harris <kharris@nexus-tech.net>
lubbock xscale
@@ -375,29 +385,13 @@ Gary Jennejohn <gj@denx.de>
smdk2400 ARM920T
trab ARM920T
-Prakash Kumar <prakash@embedx.com>
-
- cerf250 xscale
-
-Kshitij Gupta <kshitij@ti.com>
-
- omap1510inn ARM925T
- omap1610inn ARM926EJS
-
-Dave Peverley <dpeverley@mpc-data.co.uk>
- omap730p2 ARM926EJS
-
Nishant Kamat <nskamat@ti.com>
omap1610h2 ARM926EJS
-Rishi Bhattacharya <rishi@ti.com>
-
- omap5912osk ARM926EJS
-
-Richard Woodruff <r-woodruff2@ti.com>
+Prakash Kumar <prakash@embedx.com>
- omap2420h4 ARM1136EJS
+ cerf250 xscale
David Müller <d.mueller@elsoft.ch>
@@ -408,6 +402,10 @@ Rolf Offermanns <rof@sysgo.de>
shannon SA1100
+Dave Peverley <dpeverley@mpc-data.co.uk>
+
+ omap730p2 ARM926EJS
+
Robert Schwebel <r.schwebel@pengutronix.de>
csb226 xscale
@@ -415,7 +413,7 @@ Robert Schwebel <r.schwebel@pengutronix.de>
Andrea Scian <andrea.scian@dave-tech.it>
- B2 ARM7TDMI (S3C44B0X)
+ B2 ARM7TDMI (S3C44B0X)
Greg Ungerer <greg.ungerer@opengear.com>
@@ -423,6 +421,10 @@ Greg Ungerer <greg.ungerer@opengear.com>
cm4116 ks8695p
cm4148 ks8695p
+Richard Woodruff <r-woodruff2@ti.com>
+
+ omap2420h4 ARM1136EJS
+
Alex Züpke <azu@sysgo.de>
lart SA1100
diff --git a/Makefile b/Makefile
index d23a6dd..b24b26d 100644
--- a/Makefile
+++ b/Makefile
@@ -881,15 +881,14 @@ yellowstone_config: unconfig
#########################################################################
## MPC8220 Systems
#########################################################################
-Alaska8220_config: unconfig
+
+Alaska8220_config \
+Yukon8220_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8220 alaska
sorcery_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8220 sorcery
-Yukon8220_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8220 yukon
-
#########################################################################
## MPC824x Systems
#########################################################################
diff --git a/board/amcc/yellowstone/flash.c b/board/amcc/yellowstone/flash.c
index 99fcfb5..cd6a2e6 100644
--- a/board/amcc/yellowstone/flash.c
+++ b/board/amcc/yellowstone/flash.c
@@ -329,7 +329,6 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
volatile FLASH_WORD_SIZE *addr2;
int flag, prot, sect, l_sect;
- int i;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
@@ -517,7 +516,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
*/
static int write_word(flash_info_t * info, ulong dest, ulong data)
{
- volatile vu_long *addr2 = (vu_long *) (info->start[0]);
+ vu_long *addr2 = (vu_long *) (info->start[0]);
volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
ulong start;
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
index 840a46c..a6b81e6 100644
--- a/board/amcc/yellowstone/yellowstone.c
+++ b/board/amcc/yellowstone/yellowstone.c
@@ -315,10 +315,6 @@ int pci_pre_init(struct pci_controller *hose)
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
- u16 cmdstat;
-
- DECLARE_GLOBAL_DATA_PTR;
-
/*--------------------------------------------------------------------------+
* Set up Direct MMIO registers
*--------------------------------------------------------------------------*/
diff --git a/common/environment.c b/common/environment.c
index 61a8d24..c7f54c6 100644
--- a/common/environment.c
+++ b/common/environment.c
@@ -21,7 +21,12 @@
* MA 02111-1307 USA
*/
+#ifndef __ASSEMBLY__
+#define __ASSEMBLY__ /* Dirty trick to get only #defines */
+#endif
+#define __ASM_STUB_PROCESSOR_H__ /* don't include asm/processor. */
#include <config.h>
+#undef __ASSEMBLY__
#include <environment.h>
/*
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
new file mode 100644
index 0000000..2d3c0e5
--- /dev/null
+++ b/include/configs/Yukon8220.h
@@ -0,0 +1,317 @@
+/*
+ * (C) Copyright 2004
+ * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MPC8220 1
+#define CONFIG_YUKON8220 1 /* ... on Yukon board */
+
+/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
+ determine the CPU speed. */
+#define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */
+#define CFG_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+
+/* Define this for PSC console
+#define CONFIG_PSC_CONSOLE 1
+*/
+
+#define CONFIG_EXTUART_CONSOLE 1
+
+#ifdef CONFIG_EXTUART_CONSOLE
+# define CONFIG_CONS_INDEX 1
+# define CFG_NS16550_SERIAL
+# define CFG_NS16550
+# define CFG_NS16550_REG_SIZE 1
+# define CFG_NS16550_COM1 (CFG_CPLD_BASE + 0x1008)
+# define CFG_NS16550_CLK 18432000
+#endif
+
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_BOOTD | \
+ CFG_CMD_CACHE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_SNTP )
+
+#define CONFIG_NET_MULTI
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#define CONFIG_BOOTARGS "root=/dev/ram rw"
+#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61
+#define CONFIG_IPADDR 192.162.1.2
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_SERVERIP 192.162.1.1
+#define CONFIG_GATEWAYIP 192.162.1.1
+#define CONFIG_HOSTNAME yukon
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1
+#define CFG_I2C_MODULE 1
+
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR 0x52 /* 1011000xb */
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70
+/*
+#define CFG_ENV_IS_IN_EEPROM 1
+#define CFG_ENV_OFFSET 0
+#define CFG_ENV_SIZE 256
+*/
+
+/* If CFG_AMD_BOOT is defined, the the system will boot from AMD.
+ else undefined it will boot from Intel Strata flash */
+#define CFG_AMD_BOOT 1
+
+/*
+ * Flexbus Chipselect configuration
+ */
+#if defined (CFG_AMD_BOOT)
+#define CFG_CS0_BASE 0xfff0
+#define CFG_CS0_MASK 0x00080000 /* 512 KB */
+#define CFG_CS0_CTRL 0x003f0d40
+
+#define CFG_CS1_BASE 0xfe00
+#define CFG_CS1_MASK 0x01000000 /* 16 MB */
+#define CFG_CS1_CTRL 0x003f1540
+#else
+#define CFG_CS0_BASE 0xff00
+#define CFG_CS0_MASK 0x01000000 /* 16 MB */
+#define CFG_CS0_CTRL 0x003f1540
+
+#define CFG_CS1_BASE 0xfe08
+#define CFG_CS1_MASK 0x00080000 /* 512 KB */
+#define CFG_CS1_CTRL 0x003f0d40
+#endif
+
+#define CFG_CS2_BASE 0xf100
+#define CFG_CS2_MASK 0x00040000
+#define CFG_CS2_CTRL 0x003f1140
+
+#define CFG_CS3_BASE 0xf200
+#define CFG_CS3_MASK 0x00040000
+#define CFG_CS3_CTRL 0x003f1100
+
+
+#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16)
+#define CFG_FLASH1_BASE (CFG_CS1_BASE << 16)
+
+#if defined (CFG_AMD_BOOT)
+#define CFG_AMD_BASE CFG_FLASH0_BASE
+#define CFG_INTEL_BASE CFG_FLASH1_BASE + 0xf00000
+#define CFG_FLASH_BASE CFG_AMD_BASE
+#else
+#define CFG_INTEL_BASE CFG_FLASH0_BASE + 0xf00000
+#define CFG_AMD_BASE CFG_FLASH1_BASE
+#define CFG_FLASH_BASE CFG_INTEL_BASE
+#endif
+
+#define CFG_CPLD_BASE (CFG_CS2_BASE << 16)
+#define CFG_FPGA_BASE (CFG_CS3_BASE << 16)
+
+
+#define CFG_MAX_FLASH_BANKS 4 /* max num of memory banks */
+#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
+#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+
+#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */
+#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */
+
+#define CFG_FLASH_CHECKSUM
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#if defined (CFG_AMD_BOOT)
+#define CFG_ENV_ADDR (CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_AMD_SECT_SIZE)
+#define CFG_ENV_SIZE PHYS_AMD_SECT_SIZE
+#define CFG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE
+#define CFG_ENV1_ADDR (CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_INTEL_SECT_SIZE)
+#define CFG_ENV1_SIZE PHYS_INTEL_SECT_SIZE
+#define CFG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE
+#else
+#define CFG_ENV_ADDR (CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_INTEL_SECT_SIZE)
+#define CFG_ENV_SIZE PHYS_INTEL_SECT_SIZE
+#define CFG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE
+#define CFG_ENV1_ADDR (CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_AMD_SECT_SIZE)
+#define CFG_ENV1_SIZE PHYS_AMD_SECT_SIZE
+#define CFG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE
+#endif
+
+#define CONFIG_ENV_OVERWRITE 1
+
+#if defined CFG_ENV_IS_IN_FLASH
+#undef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_EEPROM
+#elif defined CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_FLASH
+#undef CFG_ENV_IS_IN_EEPROM
+#elif defined CFG_ENV_IS_IN_EEPROM
+#undef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_FLASH
+#endif
+
+#ifndef CFG_JFFS2_FIRST_SECTOR
+#define CFG_JFFS2_FIRST_SECTOR 0
+#endif
+#ifndef CFG_JFFS2_FIRST_BANK
+#define CFG_JFFS2_FIRST_BANK 0
+#endif
+#ifndef CFG_JFFS2_NUM_BANKS
+#define CFG_JFFS2_NUM_BANKS 1
+#endif
+#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1)
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xF0000000
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_DEFAULT_MBAR 0x80000000
+#define CFG_SRAM_BASE (CFG_MBAR + 0x20000)
+#define CFG_SRAM_SIZE 0x8000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR (CFG_MBAR + 0x20000)
+#define CFG_INIT_RAM_END 0x8000 /* End of used area in DPRAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/* SDRAM configuration */
+#define CFG_SDRAM_TOTAL_BANKS 2
+#define CFG_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */
+#define CFG_SDRAM_SPD_SIZE 0x40
+#define CFG_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */
+
+/* SDRAM drive strength register */
+#define CFG_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \
+ (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
+ (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \
+ (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \
+ (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT))
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC8220_FEC 1
+#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */
+#define CONFIG_PHY_ADDR 0x18
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+
+#endif /* __CONFIG_H */
diff --git a/tools/envcrc.c b/tools/envcrc.c
index 5f13a63..7b77183 100644
--- a/tools/envcrc.c
+++ b/tools/envcrc.c
@@ -25,7 +25,10 @@
#include <stdlib.h>
#include <unistd.h>
-#define __ASSEMBLY__ /* Dirty trick to get only #defines */
+#ifndef __ASSEMBLY__
+#define __ASSEMBLY__ /* Dirty trick to get only #defines */
+#endif
+#define __ASM_STUB_PROCESSOR_H__ /* don't include asm/processor. */
#include <config.h>
#undef __ASSEMBLY__
@@ -73,24 +76,24 @@ extern unsigned char environment;
int main (int argc, char **argv)
{
#ifdef ENV_IS_EMBEDDED
- int crc ;
- unsigned char *envptr = &environment,
- *dataptr = envptr + ENV_HEADER_SIZE;
- unsigned int datasize = ENV_SIZE;
+ int crc;
+ unsigned char *envptr = &environment,
+ *dataptr = envptr + ENV_HEADER_SIZE;
+ unsigned int datasize = ENV_SIZE;
- crc = crc32(0, dataptr, datasize) ;
+ crc = crc32 (0, dataptr, datasize);
- /* Check if verbose mode is activated passing a parameter to the program */
- if (argc > 1) {
- printf("CRC32 from offset %08X to %08X of environment = %08X\n",
- (unsigned int)(dataptr - envptr),
- (unsigned int)(dataptr - envptr) + datasize,
- crc);
- } else {
- printf("0x%08X\n", crc);
- }
+ /* Check if verbose mode is activated passing a parameter to the program */
+ if (argc > 1) {
+ printf ("CRC32 from offset %08X to %08X of environment = %08X\n",
+ (unsigned int) (dataptr - envptr),
+ (unsigned int) (dataptr - envptr) + datasize,
+ crc);
+ } else {
+ printf ("0x%08X\n", crc);
+ }
#else
- printf("0\n");
+ printf ("0\n");
#endif
- return EXIT_SUCCESS;
+ return EXIT_SUCCESS;
}