diff options
| author | Tom Rini <trini@konsulko.com> | 2021-12-01 07:22:25 -0500 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2021-12-01 07:22:25 -0500 |
| commit | 7f3934fae5a39925d6db45a747aac46352f61b69 (patch) | |
| tree | f94ce46957d293818880dec4baff2f938dbc560c | |
| parent | 2402c93130c09b881f9cc1369459fb49d9fa0f74 (diff) | |
| parent | c7c06fa776b3a553df922259908fad12cfa0e1e8 (diff) | |
| download | u-boot-7f3934fae5a39925d6db45a747aac46352f61b69.zip u-boot-7f3934fae5a39925d6db45a747aac46352f61b69.tar.gz u-boot-7f3934fae5a39925d6db45a747aac46352f61b69.tar.bz2 | |
Merge tag 'u-boot-stm32-20211130' of https://source.denx.de/u-boot/custodians/u-boot-stm into nextWIP/01Dec2021
- add nor1 device support for DFU command
- remove CONFIG_STM32_IPCC from stm32mp15 defconfigs
- enable simple framebuffer node for splashscreen for stm32mp1
- use lower-case hex for address for stm32 MCU and MPU's device tree
- define LOG_CATEGORY for stmfx pinctrl driver
- add support for probing bus voltage level translator
- add custom PHY reset bindings on AV96
- enable KSZ90x1 PHY driver on DHCOR
- stm32mp1 DDR update:
- add DDR read data eye training
- remove DDR calibration result
- remove DDR tuning support
- compute DDR size from DDRCTL registers
- DHSOM boards:
- increase USB power-good delay
- add update_sf script to install U-Boot into SF
- increase PHY auto-negotiation timeout to 20 seconds
- fix SoM and board coding strap GPIO handling
- auto-detect uSD level translator
62 files changed, 463 insertions, 1922 deletions
diff --git a/arch/arm/dts/stm32429i-eval-u-boot.dtsi b/arch/arm/dts/stm32429i-eval-u-boot.dtsi index 09d9d9a..fcab9ae 100644 --- a/arch/arm/dts/stm32429i-eval-u-boot.dtsi +++ b/arch/arm/dts/stm32429i-eval-u-boot.dtsi @@ -33,7 +33,7 @@ fmc: fmc@A0000000 { compatible = "st,stm32-fmc"; - reg = <0xA0000000 0x1000>; + reg = <0xa0000000 0x1000>; clocks = <&rcc 0 STM32F4_AHB3_CLOCK(FMC)>; st,syscfg = <&syscfg>; pinctrl-0 = <&fmc_pins_d32>; diff --git a/arch/arm/dts/stm32746g-eval-u-boot.dtsi b/arch/arm/dts/stm32746g-eval-u-boot.dtsi index f2195a6..8550ef7 100644 --- a/arch/arm/dts/stm32746g-eval-u-boot.dtsi +++ b/arch/arm/dts/stm32746g-eval-u-boot.dtsi @@ -177,7 +177,7 @@ }; &qspi { - reg = <0xA0001000 0x1000>, <0x90000000 0x4000000>; + reg = <0xa0001000 0x1000>, <0x90000000 0x4000000>; qflash0: n25q512a@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/dts/stm32f429-disco-u-boot.dtsi b/arch/arm/dts/stm32f429-disco-u-boot.dtsi index 297cc56..c993f86 100644 --- a/arch/arm/dts/stm32f429-disco-u-boot.dtsi +++ b/arch/arm/dts/stm32f429-disco-u-boot.dtsi @@ -33,7 +33,7 @@ fmc: fmc@A0000000 { compatible = "st,stm32-fmc"; - reg = <0xA0000000 0x1000>; + reg = <0xa0000000 0x1000>; clocks = <&rcc 0 STM32F4_AHB3_CLOCK(FMC)>; pinctrl-0 = <&fmc_pins>; pinctrl-names = "default"; diff --git a/arch/arm/dts/stm32f469-disco-u-boot.dtsi b/arch/arm/dts/stm32f469-disco-u-boot.dtsi index 9eda8f5..cd17362 100644 --- a/arch/arm/dts/stm32f469-disco-u-boot.dtsi +++ b/arch/arm/dts/stm32f469-disco-u-boot.dtsi @@ -34,7 +34,7 @@ fmc: fmc@A0000000 { compatible = "st,stm32-fmc"; - reg = <0xA0000000 0x1000>; + reg = <0xa0000000 0x1000>; clocks = <&rcc 0 STM32F4_AHB3_CLOCK(FMC)>; st,syscfg = <&syscfg>; pinctrl-0 = <&fmc_pins_d32>; @@ -70,7 +70,7 @@ compatible = "st,stm32f469-qspi"; #address-cells = <1>; #size-cells = <0>; - reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>; + reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>; reg-names = "qspi", "qspi_mm"; interrupts = <91>; spi-max-frequency = <108000000>; @@ -236,7 +236,7 @@ }; &qspi { - reg = <0xA0001000 0x1000>, <0x90000000 0x1000000>; + reg = <0xa0001000 0x1000>, <0x90000000 0x1000000>; flash0: n25q128a@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/dts/stm32f7-u-boot.dtsi b/arch/arm/dts/stm32f7-u-boot.dtsi index 46bd110..c1b2ac2 100644 --- a/arch/arm/dts/stm32f7-u-boot.dtsi +++ b/arch/arm/dts/stm32f7-u-boot.dtsi @@ -7,7 +7,7 @@ fmc: fmc@A0000000 { compatible = "st,stm32-fmc"; - reg = <0xA0000000 0x1000>; + reg = <0xa0000000 0x1000>; clocks = <&rcc 0 STM32F7_AHB3_CLOCK(FMC)>; pinctrl-0 = <&fmc_pins>; pinctrl-names = "default"; @@ -46,7 +46,7 @@ compatible = "st,stm32f469-qspi"; #address-cells = <1>; #size-cells = <0>; - reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>; + reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>; reg-names = "qspi", "qspi_mm"; interrupts = <92>; spi-max-frequency = <108000000>; diff --git a/arch/arm/dts/stm32f746-disco-u-boot.dtsi b/arch/arm/dts/stm32f746-disco-u-boot.dtsi index 4f34fc9..f88466f 100644 --- a/arch/arm/dts/stm32f746-disco-u-boot.dtsi +++ b/arch/arm/dts/stm32f746-disco-u-boot.dtsi @@ -228,7 +228,7 @@ }; &qspi { - reg = <0xA0001000 0x1000>, <0x90000000 0x1000000>; + reg = <0xa0001000 0x1000>, <0x90000000 0x1000000>; qflash0: n25q128a@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/dts/stm32f769-disco-u-boot.dtsi b/arch/arm/dts/stm32f769-disco-u-boot.dtsi index 7dfe430..5589b41 100644 --- a/arch/arm/dts/stm32f769-disco-u-boot.dtsi +++ b/arch/arm/dts/stm32f769-disco-u-boot.dtsi @@ -53,9 +53,9 @@ soc { dsi: dsi@40016c00 { compatible = "st,stm32-dsi"; - reg = <0x40016C00 0x800>; + reg = <0x40016c00 0x800>; resets = <&rcc STM32F7_APB2_RESET(DSI)>; - clocks = <&rcc 0 STM32F7_APB2_CLOCK(DSI)>, + clocks = <&rcc 0 STM32F7_APB2_CLOCK(DSI)>, <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>, <&clk_hse>; clock-names = "pclk", "px_clk", "ref"; @@ -227,7 +227,7 @@ }; &qspi { - reg = <0xA0001000 0x1000>, <0x90000000 0x4000000>; + reg = <0xa0001000 0x1000>, <0x90000000 0x4000000>; flash0: mx66l51235l@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/dts/stm32mp15-ddr.dtsi b/arch/arm/dts/stm32mp15-ddr.dtsi index 2a139c5..0aac913 100644 --- a/arch/arm/dts/stm32mp15-ddr.dtsi +++ b/arch/arm/dts/stm32mp15-ddr.dtsi @@ -116,24 +116,6 @@ DDR_MR3 >; -#ifdef DDR_PHY_CAL_SKIP - st,phy-cal = < - DDR_DX0DLLCR - DDR_DX0DQTR - DDR_DX0DQSTR - DDR_DX1DLLCR - DDR_DX1DQTR - DDR_DX1DQSTR - DDR_DX2DLLCR - DDR_DX2DQTR - DDR_DX2DQSTR - DDR_DX3DLLCR - DDR_DX3DQTR - DDR_DX3DQSTR - >; - -#endif - status = "okay"; }; }; @@ -224,18 +206,6 @@ #undef DDR_ODTCR #undef DDR_ZQ0CR1 #undef DDR_DX0GCR -#undef DDR_DX0DLLCR -#undef DDR_DX0DQTR -#undef DDR_DX0DQSTR #undef DDR_DX1GCR -#undef DDR_DX1DLLCR -#undef DDR_DX1DQTR -#undef DDR_DX1DQSTR #undef DDR_DX2GCR -#undef DDR_DX2DLLCR -#undef DDR_DX2DQTR -#undef DDR_DX2DQSTR #undef DDR_DX3GCR -#undef DDR_DX3DLLCR -#undef DDR_DX3DQTR -#undef DDR_DX3DQSTR diff --git a/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi index 978331b..e60d0ae 100644 --- a/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi @@ -100,20 +100,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE80 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE80 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi index 426be21..1a6fa80 100644 --- a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi @@ -100,20 +100,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi index b3eb280..0a277cd 100644 --- a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi @@ -101,20 +101,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi index ed3a524..92774ff 100644 --- a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi @@ -101,20 +101,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi index d5813d6..e53ab18 100644 --- a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi @@ -101,20 +101,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi index 24c8126..ff582ac 100644 --- a/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi @@ -100,20 +100,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi index db23d80..e23d6c7 100644 --- a/arch/arm/dts/stm32mp15-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15-u-boot.dtsi @@ -50,8 +50,8 @@ compatible = "st,stm32mp1-ddr"; - reg = <0x5A003000 0x550 - 0x5A004000 0x234>; + reg = <0x5a003000 0x550 + 0x5a004000 0x234>; clocks = <&rcc AXIDCG>, <&rcc DDRC1>, @@ -237,7 +237,7 @@ u-boot-stm32 { filename = "u-boot.stm32"; mkimage { - args = "-T stm32image -a 0xC0100000 -e 0xC0100000"; + args = "-T stm32image -a 0xc0100000 -e 0xc0100000"; u-boot { }; }; @@ -250,7 +250,7 @@ spl-stm32 { filename = "u-boot-spl.stm32"; mkimage { - args = "-T stm32image -a 0x2FFC2500 -e 0x2FFC2500"; + args = "-T stm32image -a 0x2ffc2500 -e 0x2ffc2500"; u-boot-spl { }; }; diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index 71b0486..5b2b09b 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -216,6 +216,10 @@ &sdmmc1 { u-boot,dm-spl; + st,use-ckin; + st,cmd-gpios = <&gpiod 2 0>; + st,ck-gpios = <&gpioc 12 0>; + st,ckin-gpios = <&gpioe 4 0>; }; &sdmmc1_b4_pins_a { diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi index 8b275e4..c96eba9 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi @@ -19,8 +19,23 @@ }; }; + +ðernet0 { + mdio0 { + ethernet-phy@7 { + reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <1000>; + }; + }; +}; + &sdmmc1 { u-boot,dm-spl; + st,use-ckin; + st,cmd-gpios = <&gpiod 2 0>; + st,ck-gpios = <&gpioc 12 0>; + st,ckin-gpios = <&gpioe 4 0>; }; &sdmmc1_b4_pins_a { diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c index a8402e2..f44afb0 100644 --- a/board/dhelectronics/dh_stm32mp1/board.c +++ b/board/dhelectronics/dh_stm32mp1/board.c @@ -212,34 +212,40 @@ static void board_get_coding_straps(void) ofnode node; int i, ret; + brdcode = 0; + ddr3code = 0; + somcode = 0; + node = ofnode_path("/config"); if (!ofnode_valid(node)) { printf("%s: no /config node?\n", __func__); return; } - brdcode = 0; - ddr3code = 0; - somcode = 0; - ret = gpio_request_list_by_name_nodev(node, "dh,som-coding-gpios", gpio, ARRAY_SIZE(gpio), GPIOD_IS_IN); for (i = 0; i < ret; i++) somcode |= !!dm_gpio_get_value(&(gpio[i])) << i; + gpio_free_list_nodev(gpio, ret); + ret = gpio_request_list_by_name_nodev(node, "dh,ddr3-coding-gpios", gpio, ARRAY_SIZE(gpio), GPIOD_IS_IN); for (i = 0; i < ret; i++) ddr3code |= !!dm_gpio_get_value(&(gpio[i])) << i; + gpio_free_list_nodev(gpio, ret); + ret = gpio_request_list_by_name_nodev(node, "dh,board-coding-gpios", gpio, ARRAY_SIZE(gpio), GPIOD_IS_IN); for (i = 0; i < ret; i++) brdcode |= !!dm_gpio_get_value(&(gpio[i])) << i; + gpio_free_list_nodev(gpio, ret); + printf("Code: SoM:rev=%d,ddr3=%d Board:rev=%d\n", somcode, ddr3code, brdcode); } diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index 55afaa5..cd7d6df 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -505,7 +505,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) node = fdt_node_offset_by_compatible(blob, -1, "simple-framebuffer"); if (node < 0) - lcd_dt_simplefb_add_node(blob); + fdt_simplefb_add_node(blob); #ifdef CONFIG_EFI_LOADER /* Reserve the spin table */ diff --git a/board/st/common/stm32mp_dfu.c b/board/st/common/stm32mp_dfu.c index 00d1fb8..a3f0da5 100644 --- a/board/st/common/stm32mp_dfu.c +++ b/board/st/common/stm32mp_dfu.c @@ -132,6 +132,10 @@ void set_dfu_alt_info(char *interface, char *devstr) mtd = get_mtd_device_nm("nor0"); if (!IS_ERR_OR_NULL(mtd)) board_get_alt_info_mtd(mtd, buf); + + mtd = get_mtd_device_nm("nor1"); + if (!IS_ERR_OR_NULL(mtd)) + board_get_alt_info_mtd(mtd, buf); } mtd = get_mtd_device_nm("nand0"); diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index 8459267..45f2ca8 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -13,6 +13,7 @@ #include <dm.h> #include <env.h> #include <env_internal.h> +#include <fdt_simplefb.h> #include <fdt_support.h> #include <g_dnl.h> #include <generic-phy.h> @@ -914,6 +915,9 @@ int ft_board_setup(void *blob, struct bd_info *bd) if (IS_ENABLED(CONFIG_FDT_FIXUP_PARTITIONS)) fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); + if (CONFIG_IS_ENABLED(FDT_SIMPLEFB)) + fdt_simplefb_enable_and_mem_rsv(blob); + return 0; } #endif diff --git a/common/Kconfig b/common/Kconfig index fede7e4..176fda9 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -776,3 +776,12 @@ config SPL_IMAGE_SIGN_INFO Enable image_sign_info helper functions in SPL. endif + +config FDT_SIMPLEFB + bool "FDT tools for simplefb support" + depends on OF_LIBFDT + help + Enable the fdt tools to manage the simple fb nodes in device tree. + These functions can be used by board to indicate to the OS + the presence of the simple frame buffer with associated reserved + memory diff --git a/common/Makefile b/common/Makefile index c500bcd..24be05c 100644 --- a/common/Makefile +++ b/common/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-$(CONFIG_DISPLAY_BOARDINFO_LATE) += board_info.o obj-$(CONFIG_CMD_BEDBUG) += bedbug.o +obj-$(CONFIG_FDT_SIMPLEFB) += fdt_simplefb.o obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o obj-$(CONFIG_MII) += miiphyutil.o obj-$(CONFIG_CMD_MII) += miiphyutil.o @@ -40,7 +41,6 @@ ifndef CONFIG_DM_VIDEO obj-$(CONFIG_LCD) += lcd.o lcd_console.o endif obj-$(CONFIG_LCD_ROTATION) += lcd_console_rotation.o -obj-$(CONFIG_LCD_DT_SIMPLEFB) += lcd_simplefb.o obj-$(CONFIG_MENU) += menu.o obj-$(CONFIG_UPDATE_COMMON) += update.o obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o diff --git a/common/lcd_simplefb.c b/common/fdt_simplefb.c index 1650615..c52846f 100644 --- a/common/lcd_simplefb.c +++ b/common/fdt_simplefb.c @@ -16,7 +16,7 @@ DECLARE_GLOBAL_DATA_PTR; -static int lcd_dt_simplefb_configure_node(void *blob, int off) +static int fdt_simplefb_configure_node(void *blob, int off) { int xsize, ysize; int bpix; /* log2 of bits per pixel */ @@ -58,7 +58,7 @@ static int lcd_dt_simplefb_configure_node(void *blob, int off) xsize * (1 << bpix) / 8, name); } -int lcd_dt_simplefb_add_node(void *blob) +int fdt_simplefb_add_node(void *blob) { static const char compat[] = "simple-framebuffer"; static const char disabled[] = "disabled"; @@ -76,10 +76,10 @@ int lcd_dt_simplefb_add_node(void *blob) if (ret < 0) return -1; - return lcd_dt_simplefb_configure_node(blob, off); + return fdt_simplefb_configure_node(blob, off); } -int lcd_dt_simplefb_enable_existing_node(void *blob) +int fdt_simplefb_enable_existing_node(void *blob) { int off; @@ -87,5 +87,32 @@ int lcd_dt_simplefb_enable_existing_node(void *blob) if (off < 0) return -1; - return lcd_dt_simplefb_configure_node(blob, off); + return fdt_simplefb_configure_node(blob, off); } + +#if CONFIG_IS_ENABLED(DM_VIDEO) +int fdt_simplefb_enable_and_mem_rsv(void *blob) +{ + struct fdt_memory mem; + int ret; + + /* nothing to do when video is not active */ + if (!video_is_active()) + return 0; + + ret = fdt_simplefb_enable_existing_node(blob); + if (ret) + return ret; + + /* nothing to do when the frame buffer is not defined */ + if (gd->video_bottom == gd->video_top) + return 0; + + /* reserved with no-map tag the video buffer */ + mem.start = gd->video_bottom; + mem.end = gd->video_top - 1; + + return fdtdec_add_reserved_memory(blob, "framebuffer", &mem, NULL, 0, NULL, + FDTDEC_RESERVED_MEMORY_NO_MAP); +} +#endif diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig index 6d76d12..195541c 100644 --- a/configs/rpi_0_w_defconfig +++ b/configs/rpi_0_w_defconfig @@ -13,6 +13,7 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig index 1931607..eb63fbd 100644 --- a/configs/rpi_2_defconfig +++ b/configs/rpi_2_defconfig @@ -14,6 +14,7 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig index 060fd36..4610289 100644 --- a/configs/rpi_3_32b_defconfig +++ b/configs/rpi_3_32b_defconfig @@ -15,6 +15,7 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/rpi_3_b_plus_defconfig b/configs/rpi_3_b_plus_defconfig index 0a69f97..91b63b6 100644 --- a/configs/rpi_3_b_plus_defconfig +++ b/configs/rpi_3_b_plus_defconfig @@ -14,6 +14,7 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig index 8016fe1..528b12e 100644 --- a/configs/rpi_3_defconfig +++ b/configs/rpi_3_defconfig @@ -14,6 +14,7 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/rpi_4_32b_defconfig b/configs/rpi_4_32b_defconfig index 990589d..88f7504 100644 --- a/configs/rpi_4_32b_defconfig +++ b/configs/rpi_4_32b_defconfig @@ -12,6 +12,7 @@ CONFIG_PREBOOT="pci enum; usb start;" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/rpi_4_defconfig b/configs/rpi_4_defconfig index 0720505..59a7103 100644 --- a/configs/rpi_4_defconfig +++ b/configs/rpi_4_defconfig @@ -12,6 +12,7 @@ CONFIG_PREBOOT="pci enum; usb start;" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig index 06ae3e9..67dbf09 100644 --- a/configs/rpi_arm64_defconfig +++ b/configs/rpi_arm64_defconfig @@ -12,6 +12,7 @@ CONFIG_PREBOOT="pci enum; usb start;" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index 8acf04d..0baef3b 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -13,6 +13,7 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig b/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig index adb8f10..11a2885 100644 --- a/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig +++ b/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig @@ -51,8 +51,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_STM32_FMC2_EBI=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y diff --git a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig index dca35db..7973e0f 100644 --- a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig +++ b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig @@ -51,8 +51,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_STM32_FMC2_EBI=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig index aa6a28e..5eadd63 100644 --- a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig +++ b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig @@ -51,8 +51,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_STM32_FMC2_EBI=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig index 9abd1a1..1dde46a 100644 --- a/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig +++ b/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig @@ -51,8 +51,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_STM32_FMC2_EBI=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index 2cc26d4..341aaf3 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -34,6 +34,7 @@ CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_FLASH_MTD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="STM32MP> " CONFIG_CMD_ADTIMG=y CONFIG_CMD_ERASEENV=y @@ -102,8 +103,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_STM32_FMC2_EBI=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig index 7b844a3..9c638ab 100644 --- a/configs/stm32mp15_defconfig +++ b/configs/stm32mp15_defconfig @@ -19,6 +19,7 @@ CONFIG_SYS_LOAD_ADDR=0xc2000000 CONFIG_FIT=y CONFIG_BOOTDELAY=1 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="STM32MP> " CONFIG_CMD_ADTIMG=y CONFIG_CMD_ERASEENV=y @@ -85,8 +86,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_STM32_FMC2_EBI=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index 8437558..8fbcef2 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -96,8 +96,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x50 CONFIG_SUPPORT_EMMC_BOOT=y diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index aa000ef..078d0de 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -92,8 +92,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x53 CONFIG_SUPPORT_EMMC_BOOT=y @@ -108,6 +106,8 @@ CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SPI_FLASH_MTD=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y CONFIG_DWC_ETH_QOS=y CONFIG_PHY=y diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig index 270cbaa..7401c4f 100644 --- a/configs/stm32mp15_trusted_defconfig +++ b/configs/stm32mp15_trusted_defconfig @@ -20,6 +20,7 @@ CONFIG_SYS_LOAD_ADDR=0xc2000000 CONFIG_FIT=y CONFIG_BOOTDELAY=1 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="STM32MP> " CONFIG_CMD_ADTIMG=y CONFIG_CMD_ERASEENV=y @@ -86,8 +87,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_STM32_FMC2_EBI=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst index 42bb941..0c5d3a9 100644 --- a/doc/board/st/stm32mp1.rst +++ b/doc/board/st/stm32mp1.rst @@ -645,16 +645,18 @@ On EV1 board, booting from SD card, without OP-TEE_:: dev: eMMC alt: 15 name: mmc1_rootfs layout: RAW_ADDR dev: eMMC alt: 16 name: mmc1_userfs layout: RAW_ADDR dev: MTD alt: 17 name: nor0 layout: RAW_ADDR - dev: MTD alt: 18 name: nand0 layout: RAW_ADDR - dev: VIRT alt: 19 name: OTP layout: RAW_ADDR - dev: VIRT alt: 20 name: PMIC layout: RAW_ADDR + dev: MTD alt: 18 name: nor1 layout: RAW_ADDR + dev: MTD alt: 19 name: nand0 layout: RAW_ADDR + dev: VIRT alt: 20 name: OTP layout: RAW_ADDR + dev: VIRT alt: 21 name: PMIC layout: RAW_ADDR All the supported device are exported for dfu-util tool:: $> dfu-util -l - Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=20, name="PMIC", serial="002700333338511934383330" - Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=19, name="OTP", serial="002700333338511934383330" - Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=18, name="nand0", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=21, name="PMIC", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=20, name="OTP", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=19, name="nand0", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=18, name="nor1", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=17, name="nor0", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=16, name="mmc1_userfs", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=15, name="mmc1_rootfs", serial="002700333338511934383330" @@ -705,12 +707,12 @@ You can update the boot device: When the board is booting for nor0 or nand0, only the MTD partition on the boot devices are available, for example: -- NOR (nor0 = alt 20) & NAND (nand0 = alt 26) :: +- NOR (nor0 = alt 20, nor1 = alt 26) & NAND (nand0 = alt 27) : $> dfu-util -d 0483:5720 -a 21 -D tf-a-stm32mp157c-ev1.stm32 $> dfu-util -d 0483:5720 -a 22 -D tf-a-stm32mp157c-ev1.stm32 $> dfu-util -d 0483:5720 -a 23 -D fip-stm32mp157c-ev1.bin - $> dfu-util -d 0483:5720 -a 27 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi + $> dfu-util -d 0483:5720 -a 28 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi - NAND (nand0 = alt 21):: diff --git a/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt b/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt index ac6a7df..926e3e8 100644 --- a/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt +++ b/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt @@ -128,23 +128,6 @@ phyc attributes: MR2 MR3 -- st,phy-cal : phy cal depending of calibration or tuning of DDR - This parameter is optional; when it is absent the built-in PHY - calibration is done. - for STM32MP15x: 12 values are requested in this order - DX0DLLCR - DX0DQTR - DX0DQSTR - DX1DLLCR - DX1DQTR - DX1DQSTR - DX2DLLCR - DX2DQTR - DX2DQSTR - DX3DLLCR - DX3DQTR - DX3DQSTR - Example: / { @@ -280,21 +263,6 @@ Example: 0x00000000 /*MR3*/ >; - st,phy-cal = < - 0x40000000 /*DX0DLLCR*/ - 0xFFFFFFFF /*DX0DQTR*/ - 0x3DB02000 /*DX0DQSTR*/ - 0x40000000 /*DX1DLLCR*/ - 0xFFFFFFFF /*DX1DQTR*/ - 0x3DB02000 /*DX1DQSTR*/ - 0x40000000 /*DX2DLLCR*/ - 0xFFFFFFFF /*DX2DQTR*/ - 0x3DB02000 /*DX2DQSTR*/ - 0x40000000 /*DX3DLLCR*/ - 0xFFFFFFFF /*DX3DQTR*/ - 0x3DB02000 /*DX3DQSTR*/ - >; - status = "okay"; }; }; diff --git a/drivers/mmc/stm32_sdmmc2.c b/drivers/mmc/stm32_sdmmc2.c index a3cdf7b..44bfc91 100644 --- a/drivers/mmc/stm32_sdmmc2.c +++ b/drivers/mmc/stm32_sdmmc2.c @@ -16,6 +16,7 @@ #include <asm/bitops.h> #include <asm/cache.h> #include <dm/device_compat.h> +#include <dm/pinctrl.h> #include <linux/bitops.h> #include <linux/delay.h> #include <linux/libfdt.h> @@ -645,6 +646,66 @@ static const struct dm_mmc_ops stm32_sdmmc2_ops = { .host_power_cycle = stm32_sdmmc2_host_power_cycle, }; +static int stm32_sdmmc2_probe_level_translator(struct udevice *dev) +{ + struct stm32_sdmmc2_priv *priv = dev_get_priv(dev); + struct gpio_desc cmd_gpio; + struct gpio_desc ck_gpio; + struct gpio_desc ckin_gpio; + int clk_hi, clk_lo, ret; + + /* + * Assume the level translator is present if st,use-ckin is set. + * This is to cater for DTs which do not implement this test. + */ + priv->clk_reg_msk |= SDMMC_CLKCR_SELCLKRX_CKIN; + + ret = gpio_request_by_name(dev, "st,cmd-gpios", 0, &cmd_gpio, + GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); + if (ret) + goto exit_cmd; + + ret = gpio_request_by_name(dev, "st,ck-gpios", 0, &ck_gpio, + GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); + if (ret) + goto exit_ck; + + ret = gpio_request_by_name(dev, "st,ckin-gpios", 0, &ckin_gpio, + GPIOD_IS_IN); + if (ret) + goto exit_ckin; + + /* All GPIOs are valid, test whether level translator works */ + + /* Sample CKIN */ + clk_hi = !!dm_gpio_get_value(&ckin_gpio); + + /* Set CK low */ + dm_gpio_set_value(&ck_gpio, 0); + + /* Sample CKIN */ + clk_lo = !!dm_gpio_get_value(&ckin_gpio); + + /* Tristate all */ + dm_gpio_set_dir_flags(&cmd_gpio, GPIOD_IS_IN); + dm_gpio_set_dir_flags(&ck_gpio, GPIOD_IS_IN); + + /* Level translator is present if CK signal is propagated to CKIN */ + if (!clk_hi || clk_lo) + priv->clk_reg_msk &= ~SDMMC_CLKCR_SELCLKRX_CKIN; + + dm_gpio_free(dev, &ckin_gpio); + +exit_ckin: + dm_gpio_free(dev, &ck_gpio); +exit_ck: + dm_gpio_free(dev, &cmd_gpio); +exit_cmd: + pinctrl_select_state(dev, "default"); + + return 0; +} + static int stm32_sdmmc2_probe(struct udevice *dev) { struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); @@ -662,7 +723,7 @@ static int stm32_sdmmc2_probe(struct udevice *dev) if (dev_read_bool(dev, "st,sig-dir")) priv->pwr_reg_msk |= SDMMC_POWER_DIRPOL; if (dev_read_bool(dev, "st,use-ckin")) - priv->clk_reg_msk |= SDMMC_CLKCR_SELCLKRX_CKIN; + stm32_sdmmc2_probe_level_translator(dev); ret = clk_get_by_index(dev, 0, &priv->clk); if (ret) diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c index fe7a59d..509e2a8 100644 --- a/drivers/pinctrl/pinctrl-stmfx.c +++ b/drivers/pinctrl/pinctrl-stmfx.c @@ -5,8 +5,12 @@ * Driver for STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander * based on Linux driver : pinctrl/pinctrl-stmfx.c */ + +#define LOG_CATEGORY UCLASS_PINCTRL + #include <common.h> #include <dm.h> +#include <log.h> #include <i2c.h> #include <asm/gpio.h> #include <dm/device.h> diff --git a/drivers/ram/stm32mp1/Makefile b/drivers/ram/stm32mp1/Makefile index e1e9135..71ded6b 100644 --- a/drivers/ram/stm32mp1/Makefile +++ b/drivers/ram/stm32mp1/Makefile @@ -8,7 +8,6 @@ obj-y += stm32mp1_ddr.o obj-$(CONFIG_STM32MP1_DDR_INTERACTIVE) += stm32mp1_interactive.o obj-$(CONFIG_STM32MP1_DDR_TESTS) += stm32mp1_tests.o -obj-$(CONFIG_STM32MP1_DDR_TUNING) += stm32mp1_tuning.o ifneq ($(DDR_INTERACTIVE),) CFLAGS_stm32mp1_interactive.o += -DCONFIG_STM32MP1_DDR_INTERACTIVE_FORCE=y diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.c b/drivers/ram/stm32mp1/stm32mp1_ddr.c index 0457166..4d78aa5 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr.c +++ b/drivers/ram/stm32mp1/stm32mp1_ddr.c @@ -68,7 +68,6 @@ struct reg_desc { #define DDRPHY_REG_REG_SIZE 11 /* st,phy-reg */ #define DDRPHY_REG_TIMING_SIZE 10 /* st,phy-timing */ -#define DDRPHY_REG_CAL_SIZE 12 /* st,phy-cal */ #define DDRCTL_REG_REG(x) DDRCTL_REG(x, stm32mp1_ddrctrl_reg) static const struct reg_desc ddr_reg[DDRCTL_REG_REG_SIZE] = { @@ -178,22 +177,6 @@ static const struct reg_desc ddrphy_timing[DDRPHY_REG_TIMING_SIZE] = { DDRPHY_REG_TIMING(mr3), }; -#define DDRPHY_REG_CAL(x) DDRPHY_REG(x, stm32mp1_ddrphy_cal) -static const struct reg_desc ddrphy_cal[DDRPHY_REG_CAL_SIZE] = { - DDRPHY_REG_CAL(dx0dllcr), - DDRPHY_REG_CAL(dx0dqtr), - DDRPHY_REG_CAL(dx0dqstr), - DDRPHY_REG_CAL(dx1dllcr), - DDRPHY_REG_CAL(dx1dqtr), - DDRPHY_REG_CAL(dx1dqstr), - DDRPHY_REG_CAL(dx2dllcr), - DDRPHY_REG_CAL(dx2dqtr), - DDRPHY_REG_CAL(dx2dqstr), - DDRPHY_REG_CAL(dx3dllcr), - DDRPHY_REG_CAL(dx3dqtr), - DDRPHY_REG_CAL(dx3dqstr), -}; - /************************************************************** * DYNAMIC REGISTERS: only used for debug purpose (read/modify) **************************************************************/ @@ -218,12 +201,24 @@ static const struct reg_desc ddrphy_dyn[] = { DDRPHY_REG_DYN(zq0sr1), DDRPHY_REG_DYN(dx0gsr0), DDRPHY_REG_DYN(dx0gsr1), + DDRPHY_REG_DYN(dx0dllcr), + DDRPHY_REG_DYN(dx0dqtr), + DDRPHY_REG_DYN(dx0dqstr), DDRPHY_REG_DYN(dx1gsr0), DDRPHY_REG_DYN(dx1gsr1), + DDRPHY_REG_DYN(dx1dllcr), + DDRPHY_REG_DYN(dx1dqtr), + DDRPHY_REG_DYN(dx1dqstr), DDRPHY_REG_DYN(dx2gsr0), DDRPHY_REG_DYN(dx2gsr1), + DDRPHY_REG_DYN(dx2dllcr), + DDRPHY_REG_DYN(dx2dqtr), + DDRPHY_REG_DYN(dx2dqstr), DDRPHY_REG_DYN(dx3gsr0), DDRPHY_REG_DYN(dx3gsr1), + DDRPHY_REG_DYN(dx3dllcr), + DDRPHY_REG_DYN(dx3dqtr), + DDRPHY_REG_DYN(dx3dqstr), }; #define DDRPHY_REG_DYN_SIZE ARRAY_SIZE(ddrphy_dyn) @@ -240,7 +235,6 @@ enum reg_type { REG_MAP, REGPHY_REG, REGPHY_TIMING, - REGPHY_CAL, #ifdef CONFIG_STM32MP1_DDR_INTERACTIVE /* dynamic registers => managed in driver or not changed, * can be dumped in interactive mode @@ -264,8 +258,6 @@ struct ddr_reg_info { enum base_type base; }; -#define DDRPHY_REG_CAL(x) DDRPHY_REG(x, stm32mp1_ddrphy_cal) - const struct ddr_reg_info ddr_registers[REG_TYPE_NB] = { [REG_REG] = { "static", ddr_reg, DDRCTL_REG_REG_SIZE, DDR_BASE}, @@ -279,8 +271,6 @@ const struct ddr_reg_info ddr_registers[REG_TYPE_NB] = { "static", ddrphy_reg, DDRPHY_REG_REG_SIZE, DDRPHY_BASE}, [REGPHY_TIMING] = { "timing", ddrphy_timing, DDRPHY_REG_TIMING_SIZE, DDRPHY_BASE}, -[REGPHY_CAL] = { - "cal", ddrphy_cal, DDRPHY_REG_CAL_SIZE, DDRPHY_BASE}, #ifdef CONFIG_STM32MP1_DDR_INTERACTIVE [REG_DYN] = { "dyn", ddr_dyn, DDR_REG_DYN_SIZE, DDR_BASE}, @@ -456,9 +446,6 @@ static u32 get_par_addr(const struct stm32mp1_ddr_config *config, case REGPHY_TIMING: par_addr = (u32)&config->p_timing; break; - case REGPHY_CAL: - par_addr = (u32)&config->p_cal; - break; case REG_DYN: case REGPHY_DYN: case REG_TYPE_NB: @@ -570,7 +557,7 @@ static void ddrphy_idone_wait(struct stm32mp1_ddrphy *phy) (u32)&phy->pgsr, pgsr, ret); } -void stm32mp1_ddrphy_init(struct stm32mp1_ddrphy *phy, u32 pir) +static void stm32mp1_ddrphy_init(struct stm32mp1_ddrphy *phy, u32 pir) { pir |= DDRPHYC_PIR_INIT; writel(pir, &phy->pir); @@ -639,7 +626,7 @@ static void wait_operating_mode(struct ddr_info *priv, int mode) log_debug("[0x%08x] stat = 0x%08x\n", (u32)&priv->ctl->stat, stat); } -void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl) +static void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl) { start_sw_done(ctl); /* quasi-dynamic register update*/ @@ -650,8 +637,8 @@ void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl) wait_sw_done_ack(ctl); } -void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl, - u32 rfshctl3, u32 pwrctl) +static void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl, + u32 rfshctl3, u32 pwrctl) { start_sw_done(ctl); if (!(rfshctl3 & DDRCTRL_RFSHCTL3_DIS_AUTO_REFRESH)) @@ -774,8 +761,6 @@ start: */ set_reg(priv, REGPHY_REG, &config->p_reg); set_reg(priv, REGPHY_TIMING, &config->p_timing); - if (config->p_cal_present) - set_reg(priv, REGPHY_CAL, &config->p_cal); if (INTERACTIVE(STEP_PHY_INIT)) goto start; @@ -810,32 +795,32 @@ start: wait_operating_mode(priv, DDRCTRL_STAT_OPERATING_MODE_NORMAL); - if (config->p_cal_present) { - log_debug("DDR DQS training skipped.\n"); - } else { - log_debug("DDR DQS training : "); + log_debug("DDR DQS training : "); /* 8. Disable Auto refresh and power down by setting * - RFSHCTL3.dis_au_refresh = 1 * - PWRCTL.powerdown_en = 0 * - DFIMISC.dfiinit_complete_en = 0 */ - stm32mp1_refresh_disable(priv->ctl); + stm32mp1_refresh_disable(priv->ctl); /* 9. Program PUBL PGCR to enable refresh during training and rank to train * not done => keep the programed value in PGCR */ /* 10. configure PUBL PIR register to specify which training step to run */ - /* warning : RVTRN is not supported by this PUBL */ - stm32mp1_ddrphy_init(priv->phy, DDRPHYC_PIR_QSTRN); + /* RVTRN is excuted only on LPDDR2/LPDDR3 */ + if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3) + pir = DDRPHYC_PIR_QSTRN; + else + pir = DDRPHYC_PIR_QSTRN | DDRPHYC_PIR_RVTRN; + stm32mp1_ddrphy_init(priv->phy, pir); /* 11. monitor PUB PGSR.IDONE to poll cpmpletion of training sequence */ - ddrphy_idone_wait(priv->phy); + ddrphy_idone_wait(priv->phy); /* 12. set back registers in step 8 to the orginal values if desidered */ - stm32mp1_refresh_restore(priv->ctl, config->c_reg.rfshctl3, - config->c_reg.pwrctl); - } /* if (config->p_cal_present) */ + stm32mp1_refresh_restore(priv->ctl, config->c_reg.rfshctl3, + config->c_reg.pwrctl); /* enable uMCTL2 AXI port 0 and 1 */ setbits_le32(&priv->ctl->pctrl_0, DDRCTRL_PCTRL_N_PORT_EN); diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.h b/drivers/ram/stm32mp1/stm32mp1_ddr.h index 4998f04..861efff 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr.h +++ b/drivers/ram/stm32mp1/stm32mp1_ddr.h @@ -140,21 +140,6 @@ struct stm32mp1_ddrphy_timing { u32 mr3; }; -struct stm32mp1_ddrphy_cal { - u32 dx0dllcr; - u32 dx0dqtr; - u32 dx0dqstr; - u32 dx1dllcr; - u32 dx1dqtr; - u32 dx1dqstr; - u32 dx2dllcr; - u32 dx2dqtr; - u32 dx2dqstr; - u32 dx3dllcr; - u32 dx3dqtr; - u32 dx3dqstr; -}; - struct stm32mp1_ddr_info { const char *name; u32 speed; /* in kHZ */ @@ -169,16 +154,9 @@ struct stm32mp1_ddr_config { struct stm32mp1_ddrctrl_perf c_perf; struct stm32mp1_ddrphy_reg p_reg; struct stm32mp1_ddrphy_timing p_timing; - struct stm32mp1_ddrphy_cal p_cal; - bool p_cal_present; }; int stm32mp1_ddr_clk_enable(struct ddr_info *priv, u32 mem_speed); -void stm32mp1_ddrphy_init(struct stm32mp1_ddrphy *phy, u32 pir); -void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl); -void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl, - u32 rfshctl3, - u32 pwrctl); void stm32mp1_ddr_init( struct ddr_info *priv, diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h index 3c8885a..f1a26e3 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h +++ b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h @@ -6,8 +6,9 @@ #ifndef _RAM_STM32MP1_DDR_REGS_H #define _RAM_STM32MP1_DDR_REGS_H -/* DDR3/LPDDR2/LPDDR3 Controller (DDRCTRL) registers */ #include <linux/bitops.h> + +/* DDR3/LPDDR2/LPDDR3 Controller (DDRCTRL) registers */ struct stm32mp1_ddrctl { u32 mstr ; /* 0x0 Master*/ u32 stat; /* 0x4 Operating Mode Status*/ @@ -238,6 +239,7 @@ struct stm32mp1_ddrphy { #define DDRCTRL_MSTR_LPDDR2 BIT(2) #define DDRCTRL_MSTR_LPDDR3 BIT(3) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK GENMASK(13, 12) +#define DDRCTRL_MSTR_DATA_BUS_WIDTH_SHIFT 12 #define DDRCTRL_MSTR_DATA_BUS_WIDTH_FULL (0 << 12) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_HALF (1 << 12) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_QUARTER (2 << 12) @@ -275,25 +277,6 @@ struct stm32mp1_ddrphy { #define DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN BIT(0) -#define DDRCTRL_DBG1_DIS_HIF BIT(1) - -#define DDRCTRL_DBGCAM_WR_DATA_PIPELINE_EMPTY BIT(29) -#define DDRCTRL_DBGCAM_RD_DATA_PIPELINE_EMPTY BIT(28) -#define DDRCTRL_DBGCAM_DBG_WR_Q_EMPTY BIT(26) -#define DDRCTRL_DBGCAM_DBG_LPR_Q_DEPTH GENMASK(12, 8) -#define DDRCTRL_DBGCAM_DBG_HPR_Q_DEPTH GENMASK(4, 0) -#define DDRCTRL_DBGCAM_DATA_PIPELINE_EMPTY \ - (DDRCTRL_DBGCAM_WR_DATA_PIPELINE_EMPTY | \ - DDRCTRL_DBGCAM_RD_DATA_PIPELINE_EMPTY) -#define DDRCTRL_DBGCAM_DBG_Q_DEPTH \ - (DDRCTRL_DBGCAM_DBG_WR_Q_EMPTY | \ - DDRCTRL_DBGCAM_DBG_LPR_Q_DEPTH | \ - DDRCTRL_DBGCAM_DBG_HPR_Q_DEPTH) - -#define DDRCTRL_DBGCMD_RANK0_REFRESH BIT(0) - -#define DDRCTRL_DBGSTAT_RANK0_REFRESH_BUSY BIT(0) - #define DDRCTRL_SWCTL_SW_DONE BIT(0) #define DDRCTRL_SWSTAT_SW_DONE_ACK BIT(0) @@ -309,13 +292,9 @@ struct stm32mp1_ddrphy { #define DDRPHYC_PIR_DRAMRST BIT(5) #define DDRPHYC_PIR_DRAMINIT BIT(6) #define DDRPHYC_PIR_QSTRN BIT(7) +#define DDRPHYC_PIR_RVTRN BIT(8) #define DDRPHYC_PIR_ICPC BIT(16) #define DDRPHYC_PIR_ZCALBYP BIT(30) -#define DDRPHYC_PIR_INITSTEPS_MASK GENMASK(31, 7) - -#define DDRPHYC_PGCR_DFTCMP BIT(2) -#define DDRPHYC_PGCR_PDDISDX BIT(24) -#define DDRPHYC_PGCR_RFSHDT_MASK GENMASK(28, 25) #define DDRPHYC_PGSR_IDONE BIT(0) #define DDRPHYC_PGSR_DTERR BIT(5) @@ -324,43 +303,6 @@ struct stm32mp1_ddrphy { #define DDRPHYC_PGSR_RVERR BIT(8) #define DDRPHYC_PGSR_RVEIRR BIT(9) -#define DDRPHYC_DLLGCR_BPS200 BIT(23) - -#define DDRPHYC_ACDLLCR_DLLDIS BIT(31) - -#define DDRPHYC_ZQ0CRN_ZDATA_MASK GENMASK(27, 0) -#define DDRPHYC_ZQ0CRN_ZDATA_SHIFT 0 -#define DDRPHYC_ZQ0CRN_ZDEN BIT(28) - -#define DDRPHYC_DXNGCR_DXEN BIT(0) - -#define DDRPHYC_DXNDLLCR_DLLSRST BIT(30) -#define DDRPHYC_DXNDLLCR_DLLDIS BIT(31) -#define DDRPHYC_DXNDLLCR_SDPHASE_MASK GENMASK(17, 14) -#define DDRPHYC_DXNDLLCR_SDPHASE_SHIFT 14 - -#define DDRPHYC_DXNDQTR_DQDLY_SHIFT(bit) (4 * (bit)) -#define DDRPHYC_DXNDQTR_DQDLY_MASK GENMASK(3, 0) -#define DDRPHYC_DXNDQTR_DQDLY_LOW_MASK GENMASK(1, 0) -#define DDRPHYC_DXNDQTR_DQDLY_HIGH_MASK GENMASK(3, 2) - -#define DDRPHYC_DXNDQSTR_DQSDLY_MASK GENMASK(22, 20) -#define DDRPHYC_DXNDQSTR_DQSDLY_SHIFT 20 -#define DDRPHYC_DXNDQSTR_DQSNDLY_MASK GENMASK(25, 23) -#define DDRPHYC_DXNDQSTR_DQSNDLY_SHIFT 23 -#define DDRPHYC_DXNDQSTR_R0DGSL_MASK GENMASK(2, 0) -#define DDRPHYC_DXNDQSTR_R0DGSL_SHIFT 0 -#define DDRPHYC_DXNDQSTR_R0DGPS_MASK GENMASK(13, 12) -#define DDRPHYC_DXNDQSTR_R0DGPS_SHIFT 12 - -#define DDRPHYC_BISTRR_BDXSEL_MASK GENMASK(22, 19) -#define DDRPHYC_BISTRR_BDXSEL_SHIFT 19 - -#define DDRPHYC_BISTGSR_BDDONE BIT(0) -#define DDRPHYC_BISTGSR_BDXERR BIT(2) - -#define DDRPHYC_BISTWCSR_DXWCNT_SHIFT 16 - /* PWR registers */ #define PWR_CR3 0x00C #define PWR_CR3_DDRSRDIS BIT(11) diff --git a/drivers/ram/stm32mp1/stm32mp1_interactive.c b/drivers/ram/stm32mp1/stm32mp1_interactive.c index 8c2310a..f0fe7e6 100644 --- a/drivers/ram/stm32mp1/stm32mp1_interactive.c +++ b/drivers/ram/stm32mp1/stm32mp1_interactive.c @@ -32,7 +32,6 @@ enum ddr_command { DDR_CMD_NEXT, DDR_CMD_GO, DDR_CMD_TEST, - DDR_CMD_TUNING, DDR_CMD_UNKNOWN, }; @@ -60,9 +59,6 @@ enum ddr_command stm32mp1_get_command(char *cmd, int argc) #ifdef CONFIG_STM32MP1_DDR_TESTS [DDR_CMD_TEST] = "test", #endif -#ifdef CONFIG_STM32MP1_DDR_TUNING - [DDR_CMD_TUNING] = "tuning", -#endif }; /* min and max number of argument */ const char cmd_arg[DDR_CMD_UNKNOWN][2] = { @@ -79,9 +75,6 @@ enum ddr_command stm32mp1_get_command(char *cmd, int argc) #ifdef CONFIG_STM32MP1_DDR_TESTS [DDR_CMD_TEST] = { 0, 255 }, #endif -#ifdef CONFIG_STM32MP1_DDR_TUNING - [DDR_CMD_TUNING] = { 0, 255 }, -#endif }; int i; @@ -111,7 +104,7 @@ static void stm32mp1_do_usage(void) "help displays help\n" "info displays DDR information\n" "info <param> <val> changes DDR information\n" - " with <param> = step, name, size, speed or cal\n" + " with <param> = step, name, size or speed\n" "freq displays the DDR PHY frequency in kHz\n" "freq <freq> changes the DDR PHY frequency\n" "param [type|reg] prints input parameters\n" @@ -126,13 +119,10 @@ static void stm32mp1_do_usage(void) #ifdef CONFIG_STM32MP1_DDR_TESTS "test [help] | <n> [...] lists (with help) or executes test <n>\n" #endif -#ifdef CONFIG_STM32MP1_DDR_TUNING - "tuning [help] | <n> [...] lists (with help) or execute tuning <n>\n" -#endif "\nwith for [type|reg]:\n" " all registers if absent\n" " <type> = ctl, phy\n" - " or one category (static, timing, map, perf, cal, dyn)\n" + " or one category (static, timing, map, perf, dyn)\n" " <reg> = name of the register\n" }; @@ -165,7 +155,6 @@ static void stm32mp1_do_info(struct ddr_info *priv, printf("name = %s\n", config->info.name); printf("size = 0x%x\n", config->info.size); printf("speed = %d kHz\n", config->info.speed); - printf("cal = %d\n", config->p_cal_present); return; } @@ -214,16 +203,6 @@ static void stm32mp1_do_info(struct ddr_info *priv, } return; } - if (!strcmp(argv[1], "cal")) { - if (strict_strtoul(argv[2], 10, &value) < 0 || - (value != 0 && value != 1)) { - printf("invalid value %s\n", argv[2]); - } else { - config->p_cal_present = value; - printf("cal = %d\n", config->p_cal_present); - } - return; - } printf("argument %s invalid\n", argv[1]); } @@ -322,7 +301,7 @@ end: return step; } -#if defined(CONFIG_STM32MP1_DDR_TESTS) || defined(CONFIG_STM32MP1_DDR_TUNING) +#if defined(CONFIG_STM32MP1_DDR_TESTS) static const char * const s_result[] = { [TEST_PASSED] = "Pass", [TEST_FAILED] = "Failed", @@ -479,16 +458,6 @@ bool stm32mp1_ddr_interactive(void *priv, stm32mp1_ddr_subcmd(priv, argc, argv, test, test_nb); break; #endif - -#ifdef CONFIG_STM32MP1_DDR_TUNING - case DDR_CMD_TUNING: - if (!stm32mp1_check_step(step, STEP_DDR_READY)) - continue; - stm32mp1_ddr_subcmd(priv, argc, argv, - tuning, tuning_nb); - break; -#endif - default: break; } diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c index 98fa1f4..49b1262 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ram.c +++ b/drivers/ram/stm32mp1/stm32mp1_ram.c @@ -16,6 +16,12 @@ #include <asm/io.h> #include <dm/device_compat.h> #include "stm32mp1_ddr.h" +#include "stm32mp1_ddr_regs.h" + +/* DDR subsystem configuration */ +struct stm32mp1_ddr_cfg { + u8 nb_bytes; /* MEMC_DRAM_DATA_WIDTH */ +}; static const char *const clkname[] = { "ddrc1", @@ -82,7 +88,7 @@ static ofnode stm32mp1_ddr_get_ofnode(struct udevice *dev) return dev_ofnode(dev); } -static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) +static int stm32mp1_ddr_setup(struct udevice *dev) { struct ddr_info *priv = dev_get_priv(dev); int ret; @@ -95,26 +101,22 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) { .name = x, \ .offset = offsetof(struct stm32mp1_ddr_config, y), \ .size = sizeof(config.y) / sizeof(u32), \ - .present = z, \ } #define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x, NULL) #define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x, NULL) -#define PHY_PARAM_OPT(x) PARAM("st,phy-"#x, p_##x, &config.p_##x##_present) const struct { const char *name; /* name in DT */ const u32 offset; /* offset in config struct */ const u32 size; /* size of parameters */ - bool * const present; /* presence indication for opt */ } param[] = { CTL_PARAM(reg), CTL_PARAM(timing), CTL_PARAM(map), CTL_PARAM(perf), PHY_PARAM(reg), - PHY_PARAM(timing), - PHY_PARAM_OPT(cal) + PHY_PARAM(timing) }; config.info.speed = ofnode_read_u32_default(node, "st,mem-speed", 0); @@ -133,25 +135,11 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) param[idx].size); dev_dbg(dev, "%s: %s[0x%x] = %d\n", __func__, param[idx].name, param[idx].size, ret); - if (ret && - (ret != -FDT_ERR_NOTFOUND || !param[idx].present)) { + if (ret) { dev_err(dev, "Cannot read %s, error=%d\n", param[idx].name, ret); return -EINVAL; } - if (param[idx].present) { - /* save presence of optional parameters */ - *param[idx].present = true; - if (ret == -FDT_ERR_NOTFOUND) { - *param[idx].present = false; -#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE - /* reset values if used later */ - memset((void *)((u32)&config + - param[idx].offset), - 0, param[idx].size * sizeof(u32)); -#endif - } - } } ret = clk_get_by_name(dev, "axidcg", &axidcg); @@ -183,6 +171,183 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) return 0; } +static u8 get_data_bus_width(struct stm32mp1_ddrctl *ctl) +{ + u32 reg = readl(&ctl->mstr) & DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK; + u8 data_bus_width = reg >> DDRCTRL_MSTR_DATA_BUS_WIDTH_SHIFT; + + return data_bus_width; +} + +static u8 get_nb_bank(struct stm32mp1_ddrctl *ctl) +{ + /* Count bank address bits */ + u8 bits = 0; + u32 reg, val; + + reg = readl(&ctl->addrmap1); + /* addrmap1.addrmap_bank_b1 */ + val = (reg & GENMASK(5, 0)) >> 0; + if (val <= 31) + bits++; + /* addrmap1.addrmap_bank_b2 */ + val = (reg & GENMASK(13, 8)) >> 8; + if (val <= 31) + bits++; + /* addrmap1.addrmap_bank_b3 */ + val = (reg & GENMASK(21, 16)) >> 16; + if (val <= 31) + bits++; + + return bits; +} + +static u8 get_nb_col(struct stm32mp1_ddrctl *ctl, u8 data_bus_width) +{ + u8 bits; + u32 reg, val; + + /* Count column address bits, start at 2 for b0 and b1 (fixed) */ + bits = 2; + + reg = readl(&ctl->addrmap2); + /* addrmap2.addrmap_col_b2 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b3 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b4 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b5 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + reg = readl(&ctl->addrmap3); + /* addrmap3.addrmap_col_b6 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b7 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b8 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b9 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + reg = readl(&ctl->addrmap4); + /* addrmap4.addrmap_col_b10 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap4.addrmap_col_b11 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + + /* + * column bits shift up: + * 1 when half the data bus is used (data_bus_width = 1) + * 2 when a quarter the data bus is used (data_bus_width = 2) + * nothing to do for full data bus (data_bus_width = 0) + */ + bits += data_bus_width; + + return bits; +} + +static u8 get_nb_row(struct stm32mp1_ddrctl *ctl) +{ + /* Count row address bits */ + u8 bits = 0; + u32 reg, val; + + reg = readl(&ctl->addrmap5); + /* addrmap5.addrmap_row_b0 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 11) + bits++; + /* addrmap5.addrmap_row_b1 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 11) + bits++; + /* addrmap5.addrmap_row_b2_10 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 11) + bits += 9; + else + printf("warning: addrmap5.addrmap_row_b2_10 not supported\n"); + /* addrmap5.addrmap_row_b11 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 11) + bits++; + + reg = readl(&ctl->addrmap6); + /* addrmap6.addrmap_row_b12 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b13 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b14 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b15 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + return bits; +} + +/* + * stm32mp1_ddr_size + * + * Get the current DRAM size from the DDR CTL registers + * + * @return: DRAM size + */ +u32 stm32mp1_ddr_size(struct udevice *dev) +{ + u8 nb_bit; + u32 ddr_size; + u8 data_bus_width; + struct ddr_info *priv = dev_get_priv(dev); + struct stm32mp1_ddrctl *ctl = priv->ctl; + struct stm32mp1_ddr_cfg *cfg = (struct stm32mp1_ddr_cfg *)dev_get_driver_data(dev); + const u8 nb_bytes = cfg->nb_bytes; + + data_bus_width = get_data_bus_width(ctl); + nb_bit = get_nb_bank(ctl) + get_nb_col(ctl, data_bus_width) + + get_nb_row(ctl); + if (nb_bit > 32) { + nb_bit = 32; + debug("invalid DDR configuration: %d bits\n", nb_bit); + } + + ddr_size = (nb_bytes >> data_bus_width) << nb_bit; + if (ddr_size > STM32_DDR_SIZE) { + ddr_size = STM32_DDR_SIZE; + debug("invalid DDR configuration: size = %x\n", ddr_size); + } + + return ddr_size; +} + static int stm32mp1_ddr_probe(struct udevice *dev) { struct ddr_info *priv = dev_get_priv(dev); @@ -209,8 +374,8 @@ static int stm32mp1_ddr_probe(struct udevice *dev) return log_ret(ret); } - ofnode node = stm32mp1_ddr_get_ofnode(dev); - priv->info.size = ofnode_read_u32_default(node, "st,mem-size", 0); + priv->info.size = stm32mp1_ddr_size(dev); + return 0; } @@ -227,8 +392,12 @@ static struct ram_ops stm32mp1_ddr_ops = { .get_info = stm32mp1_ddr_get_info, }; +static const struct stm32mp1_ddr_cfg stm32mp15x_ddr_cfg = { + .nb_bytes = 4, +}; + static const struct udevice_id stm32mp1_ddr_ids[] = { - { .compatible = "st,stm32mp1-ddr" }, + { .compatible = "st,stm32mp1-ddr", .data = (ulong)&stm32mp15x_ddr_cfg}, { } }; diff --git a/drivers/ram/stm32mp1/stm32mp1_tests.h b/drivers/ram/stm32mp1/stm32mp1_tests.h index 55f5d6d..8436780 100644 --- a/drivers/ram/stm32mp1/stm32mp1_tests.h +++ b/drivers/ram/stm32mp1/stm32mp1_tests.h @@ -28,7 +28,4 @@ struct test_desc { extern const struct test_desc test[]; extern const int test_nb; -extern const struct test_desc tuning[]; -extern const int tuning_nb; - #endif diff --git a/drivers/ram/stm32mp1/stm32mp1_tuning.c b/drivers/ram/stm32mp1/stm32mp1_tuning.c deleted file mode 100644 index c8cd7c3..0000000 --- a/drivers/ram/stm32mp1/stm32mp1_tuning.c +++ /dev/null @@ -1,1540 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause -/* - * Copyright (C) 2019, STMicroelectronics - All Rights Reserved - */ - -#define LOG_CATEGORY UCLASS_RAM - -#include <common.h> -#include <console.h> -#include <clk.h> -#include <log.h> -#include <ram.h> -#include <rand.h> -#include <reset.h> -#include <asm/io.h> -#include <linux/bitops.h> -#include <linux/delay.h> -#include <linux/iopoll.h> - -#include "stm32mp1_ddr_regs.h" -#include "stm32mp1_ddr.h" -#include "stm32mp1_tests.h" - -#define MAX_DQS_PHASE_IDX _144deg -#define MAX_DQS_UNIT_IDX 7 -#define MAX_GSL_IDX 5 -#define MAX_GPS_IDX 3 - -/* Number of bytes used in this SW. ( min 1--> max 4). */ -#define NUM_BYTES 4 - -enum dqs_phase_enum { - _36deg = 0, - _54deg = 1, - _72deg = 2, - _90deg = 3, - _108deg = 4, - _126deg = 5, - _144deg = 6 -}; - -/* BIST Result struct */ -struct BIST_result { - /* Overall test result: - * 0 Fail (any bit failed) , - * 1 Success (All bits success) - */ - bool test_result; - /* 1: true, all fail / 0: False, not all bits fail */ - bool all_bits_fail; - bool bit_i_test_result[8]; /* 0 fail / 1 success */ -}; - -/* a struct that defines tuning parameters of a byte. */ -struct tuning_position { - u8 phase; /* DQS phase */ - u8 unit; /* DQS unit delay */ - u32 bits_delay; /* Bits deskew in this byte */ -}; - -/* 36deg, 54deg, 72deg, 90deg, 108deg, 126deg, 144deg */ -const u8 dx_dll_phase[7] = {3, 2, 1, 0, 14, 13, 12}; - -static u8 BIST_error_max = 1; -static u32 BIST_seed = 0x1234ABCD; - -static u8 get_nb_bytes(struct stm32mp1_ddrctl *ctl) -{ - u32 data_bus = readl(&ctl->mstr) & DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK; - u8 nb_bytes = NUM_BYTES; - - switch (data_bus) { - case DDRCTRL_MSTR_DATA_BUS_WIDTH_HALF: - nb_bytes /= 2; - break; - case DDRCTRL_MSTR_DATA_BUS_WIDTH_QUARTER: - nb_bytes /= 4; - break; - default: - break; - } - - return nb_bytes; -} - -static u8 get_nb_bank(struct stm32mp1_ddrctl *ctl) -{ - /* Count bank address bits */ - u8 bits = 0; - u32 reg, val; - - reg = readl(&ctl->addrmap1); - /* addrmap1.addrmap_bank_b1 */ - val = (reg & GENMASK(5, 0)) >> 0; - if (val <= 31) - bits++; - /* addrmap1.addrmap_bank_b2 */ - val = (reg & GENMASK(13, 8)) >> 8; - if (val <= 31) - bits++; - /* addrmap1.addrmap_bank_b3 */ - val = (reg & GENMASK(21, 16)) >> 16; - if (val <= 31) - bits++; - - return bits; -} - -static u8 get_nb_col(struct stm32mp1_ddrctl *ctl) -{ - u8 bits; - u32 reg, val; - - /* Count column address bits, start at 2 for b0 and b1 (fixed) */ - bits = 2; - - reg = readl(&ctl->addrmap2); - /* addrmap2.addrmap_col_b2 */ - val = (reg & GENMASK(3, 0)) >> 0; - if (val <= 7) - bits++; - /* addrmap2.addrmap_col_b3 */ - val = (reg & GENMASK(11, 8)) >> 8; - if (val <= 7) - bits++; - /* addrmap2.addrmap_col_b4 */ - val = (reg & GENMASK(19, 16)) >> 16; - if (val <= 7) - bits++; - /* addrmap2.addrmap_col_b5 */ - val = (reg & GENMASK(27, 24)) >> 24; - if (val <= 7) - bits++; - - reg = readl(&ctl->addrmap3); - /* addrmap3.addrmap_col_b6 */ - val = (reg & GENMASK(3, 0)) >> 0; - if (val <= 7) - bits++; - /* addrmap3.addrmap_col_b7 */ - val = (reg & GENMASK(11, 8)) >> 8; - if (val <= 7) - bits++; - /* addrmap3.addrmap_col_b8 */ - val = (reg & GENMASK(19, 16)) >> 16; - if (val <= 7) - bits++; - /* addrmap3.addrmap_col_b9 */ - val = (reg & GENMASK(27, 24)) >> 24; - if (val <= 7) - bits++; - - reg = readl(&ctl->addrmap4); - /* addrmap4.addrmap_col_b10 */ - val = (reg & GENMASK(3, 0)) >> 0; - if (val <= 7) - bits++; - /* addrmap4.addrmap_col_b11 */ - val = (reg & GENMASK(11, 8)) >> 8; - if (val <= 7) - bits++; - - return bits; -} - -static u8 get_nb_row(struct stm32mp1_ddrctl *ctl) -{ - /* Count row address bits */ - u8 bits = 0; - u32 reg, val; - - reg = readl(&ctl->addrmap5); - /* addrmap5.addrmap_row_b0 */ - val = (reg & GENMASK(3, 0)) >> 0; - if (val <= 11) - bits++; - /* addrmap5.addrmap_row_b1 */ - val = (reg & GENMASK(11, 8)) >> 8; - if (val <= 11) - bits++; - /* addrmap5.addrmap_row_b2_10 */ - val = (reg & GENMASK(19, 16)) >> 16; - if (val <= 11) - bits += 9; - else - printf("warning: addrmap5.addrmap_row_b2_10 not supported\n"); - /* addrmap5.addrmap_row_b11 */ - val = (reg & GENMASK(27, 24)) >> 24; - if (val <= 11) - bits++; - - reg = readl(&ctl->addrmap6); - /* addrmap6.addrmap_row_b12 */ - val = (reg & GENMASK(3, 0)) >> 0; - if (val <= 7) - bits++; - /* addrmap6.addrmap_row_b13 */ - val = (reg & GENMASK(11, 8)) >> 8; - if (val <= 7) - bits++; - /* addrmap6.addrmap_row_b14 */ - val = (reg & GENMASK(19, 16)) >> 16; - if (val <= 7) - bits++; - /* addrmap6.addrmap_row_b15 */ - val = (reg & GENMASK(27, 24)) >> 24; - if (val <= 7) - bits++; - - return bits; -} - -static void itm_soft_reset(struct stm32mp1_ddrphy *phy) -{ - stm32mp1_ddrphy_init(phy, DDRPHYC_PIR_ITMSRST); -} - -/* Read DQ unit delay register and provides the retrieved value for DQS - * We are assuming that we have the same delay when clocking - * by DQS and when clocking by DQSN - */ -static u8 DQ_unit_index(struct stm32mp1_ddrphy *phy, u8 byte, u8 bit) -{ - u32 index; - u32 addr = DXNDQTR(phy, byte); - - /* We are assuming that we have the same delay when clocking by DQS - * and when clocking by DQSN : use only the low bits - */ - index = (readl(addr) >> DDRPHYC_DXNDQTR_DQDLY_SHIFT(bit)) - & DDRPHYC_DXNDQTR_DQDLY_LOW_MASK; - - log_debug("[%x]: %x => DQ unit index = %x\n", addr, readl(addr), index); - - return index; -} - -/* Sets the DQS phase delay for a byte lane. - *phase delay is specified by giving the index of the desired delay - * in the dx_dll_phase array. - */ -static void DQS_phase_delay(struct stm32mp1_ddrphy *phy, u8 byte, u8 phase_idx) -{ - u8 sdphase_val = 0; - - /* Write DXNDLLCR.SDPHASE = dx_dll_phase(phase_index); */ - sdphase_val = dx_dll_phase[phase_idx]; - clrsetbits_le32(DXNDLLCR(phy, byte), - DDRPHYC_DXNDLLCR_SDPHASE_MASK, - sdphase_val << DDRPHYC_DXNDLLCR_SDPHASE_SHIFT); -} - -/* Sets the DQS unit delay for a byte lane. - * unit delay is specified by giving the index of the desired delay - * for dgsdly and dqsndly (same value). - */ -static void DQS_unit_delay(struct stm32mp1_ddrphy *phy, - u8 byte, u8 unit_dly_idx) -{ - /* Write the same value in DXNDQSTR.DQSDLY and DXNDQSTR.DQSNDLY */ - clrsetbits_le32(DXNDQSTR(phy, byte), - DDRPHYC_DXNDQSTR_DQSDLY_MASK | - DDRPHYC_DXNDQSTR_DQSNDLY_MASK, - (unit_dly_idx << DDRPHYC_DXNDQSTR_DQSDLY_SHIFT) | - (unit_dly_idx << DDRPHYC_DXNDQSTR_DQSNDLY_SHIFT)); - - /* After changing this value, an ITM soft reset (PIR.ITMSRST=1, - * plus PIR.INIT=1) must be issued. - */ - stm32mp1_ddrphy_init(phy, DDRPHYC_PIR_ITMSRST); -} - -/* Sets the DQ unit delay for a bit line in particular byte lane. - * unit delay is specified by giving the desired delay - */ -static void set_DQ_unit_delay(struct stm32mp1_ddrphy *phy, - u8 byte, u8 bit, - u8 dq_delay_index) -{ - u8 dq_bit_delay_val = dq_delay_index | (dq_delay_index << 2); - - /* same value on delay for clock DQ an DQS_b */ - clrsetbits_le32(DXNDQTR(phy, byte), - DDRPHYC_DXNDQTR_DQDLY_MASK - << DDRPHYC_DXNDQTR_DQDLY_SHIFT(bit), - dq_bit_delay_val << DDRPHYC_DXNDQTR_DQDLY_SHIFT(bit)); -} - -static void set_r0dgsl_delay(struct stm32mp1_ddrphy *phy, - u8 byte, u8 r0dgsl_idx) -{ - clrsetbits_le32(DXNDQSTR(phy, byte), - DDRPHYC_DXNDQSTR_R0DGSL_MASK, - r0dgsl_idx << DDRPHYC_DXNDQSTR_R0DGSL_SHIFT); -} - -static void set_r0dgps_delay(struct stm32mp1_ddrphy *phy, - u8 byte, u8 r0dgps_idx) -{ - clrsetbits_le32(DXNDQSTR(phy, byte), - DDRPHYC_DXNDQSTR_R0DGPS_MASK, - r0dgps_idx << DDRPHYC_DXNDQSTR_R0DGPS_SHIFT); -} - -/* Basic BIST configuration for data lane tests. */ -static void config_BIST(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy) -{ - u8 nb_bank = get_nb_bank(ctl); - u8 nb_row = get_nb_row(ctl); - u8 nb_col = get_nb_col(ctl); - - /* Selects the SDRAM bank address to be used during BIST. */ - u32 bbank = 0; - /* Selects the SDRAM row address to be used during BIST. */ - u32 brow = 0; - /* Selects the SDRAM column address to be used during BIST. */ - u32 bcol = 0; - /* Selects the value by which the SDRAM address is incremented - * for each write/read access. - */ - u32 bainc = 0x00000008; - /* Specifies the maximum SDRAM rank to be used during BIST. - * The default value is set to maximum ranks minus 1. - * must be 0 with single rank - */ - u32 bmrank = 0; - /* Selects the SDRAM rank to be used during BIST. - * must be 0 with single rank - */ - u32 brank = 0; - - /* Specifies the maximum SDRAM bank address to be used during - * BIST before the address & increments to the next rank. - */ - u32 bmbank = (1 << nb_bank) - 1; - /* Specifies the maximum SDRAM row address to be used during - * BIST before the address & increments to the next bank. - */ - u32 bmrow = (1 << nb_row) - 1; - /* Specifies the maximum SDRAM column address to be used during - * BIST before the address & increments to the next row. - */ - u32 bmcol = (1 << nb_col) - 1; - - u32 bmode_conf = 0x00000001; /* DRam mode */ - u32 bdxen_conf = 0x00000001; /* BIST on Data byte */ - u32 bdpat_conf = 0x00000002; /* Select LFSR pattern */ - - /*Setup BIST for DRAM mode, and LFSR-random data pattern.*/ - /*Write BISTRR.BMODE = 1?b1;*/ - /*Write BISTRR.BDXEN = 1?b1;*/ - /*Write BISTRR.BDPAT = 2?b10;*/ - - /* reset BIST */ - writel(0x3, &phy->bistrr); - - writel((bmode_conf << 3) | (bdxen_conf << 14) | (bdpat_conf << 17), - &phy->bistrr); - - /*Setup BIST Word Count*/ - /*Write BISTWCR.BWCNT = 16?b0008;*/ - writel(0x00000200, &phy->bistwcr); /* A multiple of BL/2 */ - - writel(bcol | (brow << 12) | (bbank << 28), &phy->bistar0); - writel(brank | (bmrank << 2) | (bainc << 4), &phy->bistar1); - writel(bmcol | (bmrow << 12) | (bmbank << 28), &phy->bistar2); -} - -/* Select the Byte lane to be tested by BIST. */ -static void BIST_datx8_sel(struct stm32mp1_ddrphy *phy, u8 datx8) -{ - clrsetbits_le32(&phy->bistrr, - DDRPHYC_BISTRR_BDXSEL_MASK, - datx8 << DDRPHYC_BISTRR_BDXSEL_SHIFT); - - /*(For example, selecting Byte Lane 3, BISTRR.BDXSEL = 4?b0011)*/ - /* Write BISTRR.BDXSEL = datx8; */ -} - -/* Perform BIST Write_Read test on a byte lane and return test result. */ -static void BIST_test(struct stm32mp1_ddrphy *phy, u8 byte, - struct BIST_result *bist) -{ - bool result = true; /* BIST_SUCCESS */ - u32 cnt = 0; - u32 error = 0; - u32 val; - int ret; - - bist->test_result = true; - -run: - itm_soft_reset(phy); - - /*Perform BIST Reset*/ - /* Write BISTRR.BINST = 3?b011; */ - clrsetbits_le32(&phy->bistrr, - 0x00000007, - 0x00000003); - - /*Re-seed LFSR*/ - /* Write BISTLSR.SEED = 32'h1234ABCD; */ - if (BIST_seed) - writel(BIST_seed, &phy->bistlsr); - else - writel(rand(), &phy->bistlsr); - - /* some delay to reset BIST */ - udelay(10); - - /*Perform BIST Run*/ - clrsetbits_le32(&phy->bistrr, - 0x00000007, - 0x00000001); - /* Write BISTRR.BINST = 3?b001; */ - - /* poll on BISTGSR.BDONE and wait max 1000 us */ - ret = readl_poll_timeout(&phy->bistgsr, val, - val & DDRPHYC_BISTGSR_BDDONE, 1000); - - if (ret < 0) { - printf("warning: BIST timeout\n"); - result = false; /* BIST_FAIL; */ - /*Perform BIST Stop */ - clrsetbits_le32(&phy->bistrr, 0x00000007, 0x00000002); - } else { - /*Check if received correct number of words*/ - /* if (Read BISTWCSR.DXWCNT = Read BISTWCR.BWCNT) */ - if (((readl(&phy->bistwcsr)) >> DDRPHYC_BISTWCSR_DXWCNT_SHIFT) - == readl(&phy->bistwcr)) { - /*Determine if there is a data comparison error*/ - /* if (Read BISTGSR.BDXERR = 1?b0) */ - if (readl(&phy->bistgsr) & DDRPHYC_BISTGSR_BDXERR) - result = false; /* BIST_FAIL; */ - else - result = true; /* BIST_SUCCESS; */ - } else { - result = false; /* BIST_FAIL; */ - } - } - - /* loop while success */ - cnt++; - if (result && cnt != 1000) - goto run; - - if (!result) - error++; - - if (error < BIST_error_max) { - if (cnt != 1000) - goto run; - bist->test_result = true; - } else { - bist->test_result = false; - } -} - -/* After running the deskew algo, this function applies the new DQ delays - * by reading them from the array "deskew_delay"and writing in PHY registers. - * The bits that are not deskewed parfectly (too much skew on them, - * or data eye very wide) are marked in the array deskew_non_converge. - */ -static void apply_deskew_results(struct stm32mp1_ddrphy *phy, u8 byte, - u8 deskew_delay[NUM_BYTES][8], - u8 deskew_non_converge[NUM_BYTES][8]) -{ - u8 bit_i; - u8 index; - - for (bit_i = 0; bit_i < 8; bit_i++) { - set_DQ_unit_delay(phy, byte, bit_i, deskew_delay[byte][bit_i]); - index = DQ_unit_index(phy, byte, bit_i); - log_debug("Byte %d ; bit %d : The new DQ delay (%d) index=%d [delta=%d, 3 is the default]", - byte, bit_i, deskew_delay[byte][bit_i], - index, index - 3); - printf("Byte %d, bit %d, DQ delay = %d", - byte, bit_i, deskew_delay[byte][bit_i]); - if (deskew_non_converge[byte][bit_i] == 1) - log_debug(" - not converged : still more skew"); - printf("\n"); - } -} - -/* DQ Bit de-skew algorithm. - * Deskews data lines as much as possible. - * 1. Add delay to DQS line until finding the failure - * (normally a hold time violation) - * 2. Reduce DQS line by small steps until finding the very first time - * we go back to "Pass" condition. - * 3. For each DQ line, Reduce DQ delay until finding the very first failure - * (normally a hold time fail) - * 4. When all bits are at their first failure delay, we can consider them - * aligned. - * Handle conrer situation (Can't find Pass-fail, or fail-pass transitions - * at any step) - * TODO Provide a return Status. Improve doc - */ -static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, char *string) -{ - /* New DQ delay value (index), set during Deskew algo */ - u8 deskew_delay[NUM_BYTES][8]; - /*If there is still skew on a bit, mark this bit. */ - u8 deskew_non_converge[NUM_BYTES][8]; - struct BIST_result result; - s8 dqs_unit_delay_index = 0; - u8 datx8 = 0; - u8 bit_i = 0; - s8 phase_idx = 0; - s8 bit_i_delay_index = 0; - u8 success = 0; - struct tuning_position last_right_ok; - u8 force_stop = 0; - u8 fail_found; - u8 error = 0; - u8 nb_bytes = get_nb_bytes(ctl); - /* u8 last_pass_dqs_unit = 0; */ - - memset(deskew_delay, 0, sizeof(deskew_delay)); - memset(deskew_non_converge, 0, sizeof(deskew_non_converge)); - - /*Disable DQS Drift Compensation*/ - clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_DFTCMP); - /*Disable all bytes*/ - /* Disable automatic power down of DLL and IOs when disabling - * a byte (To avoid having to add programming and delay - * for a DLL re-lock when later re-enabling a disabled Byte Lane) - */ - clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_PDDISDX); - - /* Disable all data bytes */ - clrbits_le32(&phy->dx0gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx1gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx2gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN); - - /* Config the BIST block */ - config_BIST(ctl, phy); - log_debug("BIST Config done.\n"); - - /* Train each byte */ - for (datx8 = 0; datx8 < nb_bytes; datx8++) { - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - datx8 + 1, nb_bytes, error); - return TEST_FAILED; - } - log_debug("\n======================\n"); - log_debug("Start deskew byte %d .\n", datx8); - log_debug("======================\n"); - /* Enable Byte (DXNGCR, bit DXEN) */ - setbits_le32(DXNGCR(phy, datx8), DDRPHYC_DXNGCR_DXEN); - - /* Select the byte lane for comparison of read data */ - BIST_datx8_sel(phy, datx8); - - /* Set all DQDLYn to maximum value. All bits within the byte - * will be delayed with DQSTR = 2 instead of max = 3 - * to avoid inter bits fail influence - */ - writel(0xAAAAAAAA, DXNDQTR(phy, datx8)); - - /* Set the DQS phase delay to 90 DEG (default). - * What is defined here is the index of the desired config - * in the PHASE array. - */ - phase_idx = _90deg; - - /* Set DQS unit delay to the max value. */ - dqs_unit_delay_index = MAX_DQS_UNIT_IDX; - DQS_unit_delay(phy, datx8, dqs_unit_delay_index); - DQS_phase_delay(phy, datx8, phase_idx); - - /* Issue a DLL soft reset */ - clrbits_le32(DXNDLLCR(phy, datx8), DDRPHYC_DXNDLLCR_DLLSRST); - setbits_le32(DXNDLLCR(phy, datx8), DDRPHYC_DXNDLLCR_DLLSRST); - - /* Test this typical init condition */ - BIST_test(phy, datx8, &result); - success = result.test_result; - - /* If the test pass in this typical condition, - * start the algo with it. - * Else, look for Pass init condition - */ - if (!success) { - log_debug("Fail at init condtion. Let's look for a good init condition.\n"); - success = 0; /* init */ - /* Make sure we start with a PASS condition before - * looking for a fail condition. - * Find the first PASS PHASE condition - */ - - /* escape if we find a PASS */ - log_debug("increase Phase idx\n"); - while (!success && (phase_idx <= MAX_DQS_PHASE_IDX)) { - DQS_phase_delay(phy, datx8, phase_idx); - BIST_test(phy, datx8, &result); - success = result.test_result; - phase_idx++; - } - /* if ended with success - * ==>> Restore the fist success condition - */ - if (success) - phase_idx--; /* because it ended with ++ */ - } - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - datx8 + 1, nb_bytes, error); - return TEST_FAILED; - } - /* We couldn't find a successful condition, its seems - * we have hold violation, lets try reduce DQS_unit Delay - */ - if (!success) { - /* We couldn't find a successful condition, its seems - * we have hold violation, lets try reduce DQS_unit - * Delay - */ - log_debug("Still fail. Try decrease DQS Unit delay\n"); - - phase_idx = 0; - dqs_unit_delay_index = 0; - DQS_phase_delay(phy, datx8, phase_idx); - - /* escape if we find a PASS */ - while (!success && - (dqs_unit_delay_index <= - MAX_DQS_UNIT_IDX)) { - DQS_unit_delay(phy, datx8, - dqs_unit_delay_index); - BIST_test(phy, datx8, &result); - success = result.test_result; - dqs_unit_delay_index++; - } - if (success) { - /* Restore the first success condition*/ - dqs_unit_delay_index--; - /* last_pass_dqs_unit = dqs_unit_delay_index;*/ - DQS_unit_delay(phy, datx8, - dqs_unit_delay_index); - } else { - /* No need to continue, - * there is no pass region. - */ - force_stop = 1; - } - } - - /* There is an initial PASS condition - * Look for the first failing condition by PHASE stepping. - * This part of the algo can finish without converging. - */ - if (force_stop) { - printf("Result: Failed "); - printf("[Cannot Deskew lines, "); - printf("there is no PASS region]\n"); - error++; - continue; - } - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - datx8 + 1, nb_bytes, error); - return TEST_FAILED; - } - - log_debug("there is a pass region for phase idx %d\n", - phase_idx); - log_debug("Step1: Find the first failing condition\n"); - /* Look for the first failing condition by PHASE stepping. - * This part of the algo can finish without converging. - */ - - /* escape if we find a fail (hold time violation) - * condition at any bit or if out of delay range. - */ - while (success && (phase_idx <= MAX_DQS_PHASE_IDX)) { - DQS_phase_delay(phy, datx8, phase_idx); - BIST_test(phy, datx8, &result); - success = result.test_result; - phase_idx++; - } - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - datx8 + 1, nb_bytes, error); - return TEST_FAILED; - } - - /* if the loop ended with a failing condition at any bit, - * lets look for the first previous success condition by unit - * stepping (minimal delay) - */ - if (!success) { - log_debug("Fail region (PHASE) found phase idx %d\n", - phase_idx); - log_debug("Let's look for first success by DQS Unit steps\n"); - /* This part, the algo always converge */ - phase_idx--; - - /* escape if we find a success condition - * or if out of delay range. - */ - while (!success && dqs_unit_delay_index >= 0) { - DQS_unit_delay(phy, datx8, - dqs_unit_delay_index); - BIST_test(phy, datx8, &result); - success = result.test_result; - dqs_unit_delay_index--; - } - /* if the loop ended with a success condition, - * the last delay Right OK (before hold violation) - * condition is then defined as following: - */ - if (success) { - /* Hold the dely parameters of the the last - * delay Right OK condition. - * -1 to get back to current condition - */ - last_right_ok.phase = phase_idx; - /*+1 to get back to current condition */ - last_right_ok.unit = dqs_unit_delay_index + 1; - last_right_ok.bits_delay = 0xFFFFFFFF; - log_debug("Found %d\n", dqs_unit_delay_index); - } else { - /* the last OK condition is then with the - * previous phase_idx. - * -2 instead of -1 because at the last - * iteration of the while(), - * we incremented phase_idx - */ - last_right_ok.phase = phase_idx - 1; - /* Nominal+1. Because we want the previous - * delay after reducing the phase delay. - */ - last_right_ok.unit = 1; - last_right_ok.bits_delay = 0xFFFFFFFF; - log_debug("Not Found : try previous phase %d\n", - phase_idx - 1); - - DQS_phase_delay(phy, datx8, phase_idx - 1); - dqs_unit_delay_index = 0; - success = true; - while (success && - (dqs_unit_delay_index < - MAX_DQS_UNIT_IDX)) { - DQS_unit_delay(phy, datx8, - dqs_unit_delay_index); - BIST_test(phy, datx8, &result); - success = result.test_result; - dqs_unit_delay_index++; - log_debug("dqs_unit_delay_index = %d, result = %d\n", - dqs_unit_delay_index, success); - } - - if (!success) { - last_right_ok.unit = - dqs_unit_delay_index - 1; - } else { - last_right_ok.unit = 0; - log_debug("ERROR: failed region not FOUND"); - } - } - } else { - /* we can't find a failing condition at all bits - * ==> Just hold the last test condition - * (the max DQS delay) - * which is the most likely, - * the closest to a hold violation - * If we can't find a Fail condition after - * the Pass region, stick at this position - * In order to have max chances to find a fail - * when reducing DQ delays. - */ - last_right_ok.phase = MAX_DQS_PHASE_IDX; - last_right_ok.unit = MAX_DQS_UNIT_IDX; - last_right_ok.bits_delay = 0xFFFFFFFF; - log_debug("Can't find the a fail condition\n"); - } - - /* step 2: - * if we arrive at this stage, it means that we found the last - * Right OK condition (by tweeking the DQS delay). Or we simply - * pushed DQS delay to the max - * This means that by reducing the delay on some DQ bits, - * we should find a failing condition. - */ - printf("Byte %d, DQS unit = %d, phase = %d\n", - datx8, last_right_ok.unit, last_right_ok.phase); - log_debug("Step2, unit = %d, phase = %d, bits delay=%x\n", - last_right_ok.unit, last_right_ok.phase, - last_right_ok.bits_delay); - - /* Restore the last_right_ok condtion. */ - DQS_unit_delay(phy, datx8, last_right_ok.unit); - DQS_phase_delay(phy, datx8, last_right_ok.phase); - writel(last_right_ok.bits_delay, DXNDQTR(phy, datx8)); - - /* train each bit - * reduce delay on each bit, and perform a write/read test - * and stop at the very first time it fails. - * the goal is the find the first failing condition - * for each bit. - * When we achieve this condition< for all the bits, - * we are sure they are aligned (+/- step resolution) - */ - fail_found = 0; - for (bit_i = 0; bit_i < 8; bit_i++) { - if (ctrlc()) { - sprintf(string, - "interrupted at byte %d/%d, error=%d", - datx8 + 1, nb_bytes, error); - return error; - } - log_debug("deskewing bit %d:\n", bit_i); - success = 1; /* init */ - /* Set all DQDLYn to maximum value. - * Only bit_i will be down-delayed - * ==> if we have a fail, it will be definitely - * from bit_i - */ - writel(0xFFFFFFFF, DXNDQTR(phy, datx8)); - /* Arriving at this stage, - * we have a success condition with delay = 3; - */ - bit_i_delay_index = 3; - - /* escape if bit delay is out of range or - * if a fatil occurs - */ - while ((bit_i_delay_index >= 0) && success) { - set_DQ_unit_delay(phy, datx8, - bit_i, - bit_i_delay_index); - BIST_test(phy, datx8, &result); - success = result.test_result; - bit_i_delay_index--; - } - - /* if escape with a fail condition - * ==> save this position for bit_i - */ - if (!success) { - /* save the delay position. - * Add 1 because the while loop ended with a --, - * and that we need to hold the last success - * delay - */ - deskew_delay[datx8][bit_i] = - bit_i_delay_index + 2; - if (deskew_delay[datx8][bit_i] > 3) - deskew_delay[datx8][bit_i] = 3; - - /* A flag that states we found at least a fail - * at one bit. - */ - fail_found = 1; - log_debug("Fail found on bit %d, for delay = %d => deskew[%d][%d] = %d\n", - bit_i, bit_i_delay_index + 1, - datx8, bit_i, - deskew_delay[datx8][bit_i]); - } else { - /* if we can find a success condition by - * back-delaying this bit, just set the delay - * to 0 (the best deskew - * possible) and mark the bit. - */ - deskew_delay[datx8][bit_i] = 0; - /* set a flag that will be used later - * in the report. - */ - deskew_non_converge[datx8][bit_i] = 1; - log_debug("Fail not found on bit %d => deskew[%d][%d] = %d\n", - bit_i, datx8, bit_i, - deskew_delay[datx8][bit_i]); - } - } - log_debug("**********byte %d tuning complete************\n", - datx8); - /* If we can't find any failure by back delaying DQ lines, - * hold the default values - */ - if (!fail_found) { - for (bit_i = 0; bit_i < 8; bit_i++) - deskew_delay[datx8][bit_i] = 0; - log_debug("The Deskew algorithm can't converge, there is too much margin in your design. Good job!\n"); - } - - apply_deskew_results(phy, datx8, deskew_delay, - deskew_non_converge); - /* Restore nominal value for DQS delay */ - DQS_phase_delay(phy, datx8, 3); - DQS_unit_delay(phy, datx8, 3); - /* disable byte after byte bits deskew */ - clrbits_le32(DXNGCR(phy, datx8), DDRPHYC_DXNGCR_DXEN); - } /* end of byte deskew */ - - /* re-enable all data bytes */ - setbits_le32(&phy->dx0gcr, DDRPHYC_DXNGCR_DXEN); - setbits_le32(&phy->dx1gcr, DDRPHYC_DXNGCR_DXEN); - setbits_le32(&phy->dx2gcr, DDRPHYC_DXNGCR_DXEN); - setbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN); - - if (error) { - sprintf(string, "error = %d", error); - return TEST_FAILED; - } - - return TEST_PASSED; -} /* end function */ - -/* Trim DQS timings and set it in the centre of data eye. - * Look for a PPPPF region, then look for a FPPP region and finally select - * the mid of the FPPPPPF region - */ -static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, char *string) -{ - /*Stores the DQS trim values (PHASE index, unit index) */ - u8 eye_training_val[NUM_BYTES][2]; - u8 byte = 0; - struct BIST_result result; - s8 dqs_unit_delay_index = 0; - s8 phase_idx = 0; - s8 dqs_unit_delay_index_pass = 0; - s8 phase_idx_pass = 0; - u8 success = 0; - u8 left_phase_bound_found, right_phase_bound_found; - u8 left_unit_bound_found, right_unit_bound_found; - u8 left_bound_found, right_bound_found; - struct tuning_position left_bound, right_bound; - u8 error = 0; - u8 nb_bytes = get_nb_bytes(ctl); - - /*Disable DQS Drift Compensation*/ - clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_DFTCMP); - /*Disable all bytes*/ - /* Disable automatic power down of DLL and IOs when disabling a byte - * (To avoid having to add programming and delay - * for a DLL re-lock when later re-enabling a disabled Byte Lane) - */ - clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_PDDISDX); - - /*Disable all data bytes */ - clrbits_le32(&phy->dx0gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx1gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx2gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN); - - /* Config the BIST block */ - config_BIST(ctl, phy); - - for (byte = 0; byte < nb_bytes; byte++) { - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - byte + 1, nb_bytes, error); - return TEST_FAILED; - } - right_bound.phase = 0; - right_bound.unit = 0; - - left_bound.phase = 0; - left_bound.unit = 0; - - left_phase_bound_found = 0; - right_phase_bound_found = 0; - - left_unit_bound_found = 0; - right_unit_bound_found = 0; - - left_bound_found = 0; - right_bound_found = 0; - - /* Enable Byte (DXNGCR, bit DXEN) */ - setbits_le32(DXNGCR(phy, byte), DDRPHYC_DXNGCR_DXEN); - - /* Select the byte lane for comparison of read data */ - BIST_datx8_sel(phy, byte); - - /* Set DQS phase delay to the nominal value. */ - phase_idx = _90deg; - phase_idx_pass = phase_idx; - - /* Set DQS unit delay to the nominal value. */ - dqs_unit_delay_index = 3; - dqs_unit_delay_index_pass = dqs_unit_delay_index; - success = 0; - - log_debug("STEP0: Find Init delay\n"); - /* STEP0: Find Init delay: a delay that put the system - * in a "Pass" condition then (TODO) update - * dqs_unit_delay_index_pass & phase_idx_pass - */ - DQS_unit_delay(phy, byte, dqs_unit_delay_index); - DQS_phase_delay(phy, byte, phase_idx); - BIST_test(phy, byte, &result); - success = result.test_result; - /* If we have a fail in the nominal condition */ - if (!success) { - /* Look at the left */ - while (phase_idx >= 0 && !success) { - phase_idx--; - DQS_phase_delay(phy, byte, phase_idx); - BIST_test(phy, byte, &result); - success = result.test_result; - } - } - if (!success) { - /* if we can't find pass condition, - * then look at the right - */ - phase_idx = _90deg; - while (phase_idx <= MAX_DQS_PHASE_IDX && - !success) { - phase_idx++; - DQS_phase_delay(phy, byte, - phase_idx); - BIST_test(phy, byte, &result); - success = result.test_result; - } - } - /* save the pass condition */ - if (success) { - phase_idx_pass = phase_idx; - } else { - printf("Result: Failed "); - printf("[Cannot DQS timings, "); - printf("there is no PASS region]\n"); - error++; - continue; - } - - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - byte + 1, nb_bytes, error); - return TEST_FAILED; - } - log_debug("STEP1: Find LEFT PHASE DQS Bound\n"); - /* STEP1: Find LEFT PHASE DQS Bound */ - while ((phase_idx >= 0) && - (phase_idx <= MAX_DQS_PHASE_IDX) && - !left_phase_bound_found) { - DQS_unit_delay(phy, byte, - dqs_unit_delay_index); - DQS_phase_delay(phy, byte, - phase_idx); - BIST_test(phy, byte, &result); - success = result.test_result; - - /*TODO: Manage the case were at the beginning - * there is already a fail - */ - if (!success) { - /* the last pass condition */ - left_bound.phase = ++phase_idx; - left_phase_bound_found = 1; - } else if (success) { - phase_idx--; - } - } - if (!left_phase_bound_found) { - left_bound.phase = 0; - phase_idx = 0; - } - /* If not found, lets take 0 */ - - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - byte + 1, nb_bytes, error); - return TEST_FAILED; - } - log_debug("STEP2: Find UNIT left bound\n"); - /* STEP2: Find UNIT left bound */ - while ((dqs_unit_delay_index >= 0) && - !left_unit_bound_found) { - DQS_unit_delay(phy, byte, - dqs_unit_delay_index); - DQS_phase_delay(phy, byte, phase_idx); - BIST_test(phy, byte, &result); - success = result.test_result; - if (!success) { - left_bound.unit = - ++dqs_unit_delay_index; - left_unit_bound_found = 1; - left_bound_found = 1; - } else if (success) { - dqs_unit_delay_index--; - } - } - - /* If not found, lets take 0 */ - if (!left_unit_bound_found) - left_bound.unit = 0; - - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - byte + 1, nb_bytes, error); - return TEST_FAILED; - } - log_debug("STEP3: Find PHase right bound\n"); - /* STEP3: Find PHase right bound, start with "pass" - * condition - */ - - /* Set DQS phase delay to the pass value. */ - phase_idx = phase_idx_pass; - - /* Set DQS unit delay to the pass value. */ - dqs_unit_delay_index = dqs_unit_delay_index_pass; - - while ((phase_idx <= MAX_DQS_PHASE_IDX) && - !right_phase_bound_found) { - DQS_unit_delay(phy, byte, - dqs_unit_delay_index); - DQS_phase_delay(phy, byte, phase_idx); - BIST_test(phy, byte, &result); - success = result.test_result; - if (!success) { - /* the last pass condition */ - right_bound.phase = --phase_idx; - right_phase_bound_found = 1; - } else if (success) { - phase_idx++; - } - } - - /* If not found, lets take the max value */ - if (!right_phase_bound_found) { - right_bound.phase = MAX_DQS_PHASE_IDX; - phase_idx = MAX_DQS_PHASE_IDX; - } - - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - byte + 1, nb_bytes, error); - return TEST_FAILED; - } - log_debug("STEP4: Find UNIT right bound\n"); - /* STEP4: Find UNIT right bound */ - while ((dqs_unit_delay_index <= MAX_DQS_UNIT_IDX) && - !right_unit_bound_found) { - DQS_unit_delay(phy, byte, - dqs_unit_delay_index); - DQS_phase_delay(phy, byte, phase_idx); - BIST_test(phy, byte, &result); - success = result.test_result; - if (!success) { - right_bound.unit = - --dqs_unit_delay_index; - right_unit_bound_found = 1; - right_bound_found = 1; - } else if (success) { - dqs_unit_delay_index++; - } - } - /* If not found, lets take the max value */ - if (!right_unit_bound_found) - right_bound.unit = MAX_DQS_UNIT_IDX; - - /* If we found a regular FAil Pass FAil pattern - * FFPPPPPPFF - * OR PPPPPFF Or FFPPPPP - */ - - if (left_bound_found || right_bound_found) { - eye_training_val[byte][0] = (right_bound.phase + - left_bound.phase) / 2; - eye_training_val[byte][1] = (right_bound.unit + - left_bound.unit) / 2; - - /* If we already lost 1/2PHASE Tuning, - * let's try to recover by ++ on unit - */ - if (((right_bound.phase + left_bound.phase) % 2 == 1) && - eye_training_val[byte][1] != MAX_DQS_UNIT_IDX) - eye_training_val[byte][1]++; - log_debug("** found phase : %d - %d & unit %d - %d\n", - right_bound.phase, left_bound.phase, - right_bound.unit, left_bound.unit); - log_debug("** calculating mid region: phase: %d unit: %d (nominal is 3)\n", - eye_training_val[byte][0], - eye_training_val[byte][1]); - } else { - /* PPPPPPPPPP, we're already good. - * Set nominal values. - */ - eye_training_val[byte][0] = 3; - eye_training_val[byte][1] = 3; - } - DQS_phase_delay(phy, byte, eye_training_val[byte][0]); - DQS_unit_delay(phy, byte, eye_training_val[byte][1]); - - printf("Byte %d, DQS unit = %d, phase = %d\n", - byte, - eye_training_val[byte][1], - eye_training_val[byte][0]); - } - - if (error) { - sprintf(string, "error = %d", error); - return TEST_FAILED; - } - - return TEST_PASSED; -} - -static void display_reg_results(struct stm32mp1_ddrphy *phy, u8 byte) -{ - u8 i = 0; - - printf("Byte %d Dekew result, bit0 delay, bit1 delay...bit8 delay\n ", - byte); - - for (i = 0; i < 8; i++) - printf("%d ", DQ_unit_index(phy, byte, i)); - printf("\n"); - - printf("dxndllcr: [%08x] val:%08x\n", - DXNDLLCR(phy, byte), - readl(DXNDLLCR(phy, byte))); - printf("dxnqdstr: [%08x] val:%08x\n", - DXNDQSTR(phy, byte), - readl(DXNDQSTR(phy, byte))); - printf("dxndqtr: [%08x] val:%08x\n", - DXNDQTR(phy, byte), - readl(DXNDQTR(phy, byte))); -} - -/* analyse the dgs gating log table, and determine the midpoint.*/ -static u8 set_midpoint_read_dqs_gating(struct stm32mp1_ddrphy *phy, u8 byte, - u8 dqs_gating[NUM_BYTES] - [MAX_GSL_IDX + 1] - [MAX_GPS_IDX + 1]) -{ - /* stores the dqs gate values (gsl index, gps index) */ - u8 dqs_gate_values[NUM_BYTES][2]; - u8 gsl_idx, gps_idx = 0; - u8 left_bound_idx[2] = {0, 0}; - u8 right_bound_idx[2] = {0, 0}; - u8 left_bound_found = 0; - u8 right_bound_found = 0; - u8 intermittent = 0; - u8 value; - - for (gsl_idx = 0; gsl_idx <= MAX_GSL_IDX; gsl_idx++) { - for (gps_idx = 0; gps_idx <= MAX_GPS_IDX; gps_idx++) { - value = dqs_gating[byte][gsl_idx][gps_idx]; - if (value == 1 && left_bound_found == 0) { - left_bound_idx[0] = gsl_idx; - left_bound_idx[1] = gps_idx; - left_bound_found = 1; - } else if (value == 0 && - left_bound_found == 1 && - !right_bound_found) { - if (gps_idx == 0) { - right_bound_idx[0] = gsl_idx - 1; - right_bound_idx[1] = MAX_GPS_IDX; - } else { - right_bound_idx[0] = gsl_idx; - right_bound_idx[1] = gps_idx - 1; - } - right_bound_found = 1; - } else if (value == 1 && - right_bound_found == 1) { - intermittent = 1; - } - } - } - - /* if only ppppppp is found, there is no mid region. */ - if (left_bound_idx[0] == 0 && left_bound_idx[1] == 0 && - right_bound_idx[0] == 0 && right_bound_idx[1] == 0) - intermittent = 1; - - /*if we found a regular fail pass fail pattern ffppppppff - * or pppppff or ffppppp - */ - if (!intermittent) { - /*if we found a regular fail pass fail pattern ffppppppff - * or pppppff or ffppppp - */ - if (left_bound_found || right_bound_found) { - log_debug("idx0(%d): %d %d idx1(%d) : %d %d\n", - left_bound_found, - right_bound_idx[0], left_bound_idx[0], - right_bound_found, - right_bound_idx[1], left_bound_idx[1]); - dqs_gate_values[byte][0] = - (right_bound_idx[0] + left_bound_idx[0]) / 2; - dqs_gate_values[byte][1] = - (right_bound_idx[1] + left_bound_idx[1]) / 2; - /* if we already lost 1/2gsl tuning, - * let's try to recover by ++ on gps - */ - if (((right_bound_idx[0] + - left_bound_idx[0]) % 2 == 1) && - dqs_gate_values[byte][1] != MAX_GPS_IDX) - dqs_gate_values[byte][1]++; - /* if we already lost 1/2gsl tuning and gps is on max*/ - else if (((right_bound_idx[0] + - left_bound_idx[0]) % 2 == 1) && - dqs_gate_values[byte][1] == MAX_GPS_IDX) { - dqs_gate_values[byte][1] = 0; - dqs_gate_values[byte][0]++; - } - /* if we have gsl left and write limit too close - * (difference=1) - */ - if (((right_bound_idx[0] - left_bound_idx[0]) == 1)) { - dqs_gate_values[byte][1] = (left_bound_idx[1] + - right_bound_idx[1] + - 4) / 2; - if (dqs_gate_values[byte][1] >= 4) { - dqs_gate_values[byte][0] = - right_bound_idx[0]; - dqs_gate_values[byte][1] -= 4; - } else { - dqs_gate_values[byte][0] = - left_bound_idx[0]; - } - } - log_debug("*******calculating mid region: system latency: %d phase: %d********\n", - dqs_gate_values[byte][0], - dqs_gate_values[byte][1]); - log_debug("*******the nominal values were system latency: 0 phase: 2*******\n"); - } - } else { - /* if intermitant, restore defaut values */ - log_debug("dqs gating:no regular fail/pass/fail found. defaults values restored.\n"); - dqs_gate_values[byte][0] = 0; - dqs_gate_values[byte][1] = 2; - } - set_r0dgsl_delay(phy, byte, dqs_gate_values[byte][0]); - set_r0dgps_delay(phy, byte, dqs_gate_values[byte][1]); - printf("Byte %d, R0DGSL = %d, R0DGPS = %d\n", - byte, dqs_gate_values[byte][0], dqs_gate_values[byte][1]); - - /* return 0 if intermittent or if both left_bound - * and right_bound are not found - */ - return !(intermittent || (left_bound_found && right_bound_found)); -} - -static enum test_result read_dqs_gating(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, - char *string) -{ - /* stores the log of pass/fail */ - u8 dqs_gating[NUM_BYTES][MAX_GSL_IDX + 1][MAX_GPS_IDX + 1]; - u8 byte, gsl_idx, gps_idx = 0; - struct BIST_result result; - u8 success = 0; - u8 nb_bytes = get_nb_bytes(ctl); - - memset(dqs_gating, 0x0, sizeof(dqs_gating)); - - /*disable dqs drift compensation*/ - clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_DFTCMP); - /*disable all bytes*/ - /* disable automatic power down of dll and ios when disabling a byte - * (to avoid having to add programming and delay - * for a dll re-lock when later re-enabling a disabled byte lane) - */ - clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_PDDISDX); - - /* disable all data bytes */ - clrbits_le32(&phy->dx0gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx1gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx2gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN); - - /* config the bist block */ - config_BIST(ctl, phy); - - for (byte = 0; byte < nb_bytes; byte++) { - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d", - byte + 1, nb_bytes); - return TEST_FAILED; - } - /* enable byte x (dxngcr, bit dxen) */ - setbits_le32(DXNGCR(phy, byte), DDRPHYC_DXNGCR_DXEN); - - /* select the byte lane for comparison of read data */ - BIST_datx8_sel(phy, byte); - for (gsl_idx = 0; gsl_idx <= MAX_GSL_IDX; gsl_idx++) { - for (gps_idx = 0; gps_idx <= MAX_GPS_IDX; gps_idx++) { - if (ctrlc()) { - sprintf(string, - "interrupted at byte %d/%d", - byte + 1, nb_bytes); - return TEST_FAILED; - } - /* write cfg to dxndqstr */ - set_r0dgsl_delay(phy, byte, gsl_idx); - set_r0dgps_delay(phy, byte, gps_idx); - - BIST_test(phy, byte, &result); - success = result.test_result; - if (success) - dqs_gating[byte][gsl_idx][gps_idx] = 1; - itm_soft_reset(phy); - } - } - set_midpoint_read_dqs_gating(phy, byte, dqs_gating); - /* dummy reads */ - readl(0xc0000000); - readl(0xc0000000); - } - - /* re-enable drift compensation */ - /* setbits_le32(&phy->pgcr, DDRPHYC_PGCR_DFTCMP); */ - return TEST_PASSED; -} - -/**************************************************************** - * TEST - **************************************************************** - */ -static enum test_result do_read_dqs_gating(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, - char *string, int argc, - char *argv[]) -{ - u32 rfshctl3 = readl(&ctl->rfshctl3); - u32 pwrctl = readl(&ctl->pwrctl); - u32 derateen = readl(&ctl->derateen); - enum test_result res; - - writel(0x0, &ctl->derateen); - stm32mp1_refresh_disable(ctl); - - res = read_dqs_gating(ctl, phy, string); - - stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl); - writel(derateen, &ctl->derateen); - - return res; -} - -static enum test_result do_bit_deskew(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, - char *string, int argc, char *argv[]) -{ - u32 rfshctl3 = readl(&ctl->rfshctl3); - u32 pwrctl = readl(&ctl->pwrctl); - u32 derateen = readl(&ctl->derateen); - enum test_result res; - - writel(0x0, &ctl->derateen); - stm32mp1_refresh_disable(ctl); - - res = bit_deskew(ctl, phy, string); - - stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl); - writel(derateen, &ctl->derateen); - - return res; -} - -static enum test_result do_eye_training(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, - char *string, int argc, char *argv[]) -{ - u32 rfshctl3 = readl(&ctl->rfshctl3); - u32 pwrctl = readl(&ctl->pwrctl); - u32 derateen = readl(&ctl->derateen); - enum test_result res; - - writel(0x0, &ctl->derateen); - stm32mp1_refresh_disable(ctl); - - res = eye_training(ctl, phy, string); - - stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl); - writel(derateen, &ctl->derateen); - - return res; -} - -static enum test_result do_display(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, - char *string, int argc, char *argv[]) -{ - int byte; - u8 nb_bytes = get_nb_bytes(ctl); - - for (byte = 0; byte < nb_bytes; byte++) - display_reg_results(phy, byte); - - return TEST_PASSED; -} - -static enum test_result do_bist_config(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, - char *string, int argc, char *argv[]) -{ - unsigned long value; - - if (argc > 0) { - if (strict_strtoul(argv[0], 0, &value) < 0) { - sprintf(string, "invalid nbErr %s", argv[0]); - return TEST_FAILED; - } - BIST_error_max = value; - } - if (argc > 1) { - if (strict_strtoul(argv[1], 0, &value) < 0) { - sprintf(string, "invalid Seed %s", argv[1]); - return TEST_FAILED; - } - BIST_seed = value; - } - printf("Bist.nbErr = %d\n", BIST_error_max); - if (BIST_seed) - printf("Bist.Seed = 0x%x\n", BIST_seed); - else - printf("Bist.Seed = random\n"); - - return TEST_PASSED; -} - -/**************************************************************** - * TEST Description - **************************************************************** - */ - -const struct test_desc tuning[] = { - {do_read_dqs_gating, "Read DQS gating", - "software read DQS Gating", "", 0 }, - {do_bit_deskew, "Bit de-skew", "", "", 0 }, - {do_eye_training, "Eye Training", "or DQS training", "", 0 }, - {do_display, "Display registers", "", "", 0 }, - {do_bist_config, "Bist config", "[nbErr] [seed]", - "configure Bist test", 2}, -}; - -const int tuning_nb = ARRAY_SIZE(tuning); diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c index 65c882d..87e5fd5 100644 --- a/drivers/video/stm32/stm32_ltdc.c +++ b/drivers/video/stm32/stm32_ltdc.c @@ -459,7 +459,10 @@ static int stm32_ltdc_bind(struct udevice *dev) uc_plat->size = CONFIG_VIDEO_STM32_MAX_XRES * CONFIG_VIDEO_STM32_MAX_YRES * (CONFIG_VIDEO_STM32_MAX_BPP >> 3); - dev_dbg(dev, "frame buffer max size %d bytes\n", uc_plat->size); + /* align framebuffer on kernel MMU_SECTION_SIZE = max 2MB for LPAE */ + uc_plat->align = SZ_2M; + dev_dbg(dev, "frame buffer max size %d bytes align %x\n", + uc_plat->size, uc_plat->align); return 0; } diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c index 9f8cf6e..43ebb3c 100644 --- a/drivers/video/video-uclass.c +++ b/drivers/video/video-uclass.c @@ -228,6 +228,20 @@ void video_sync_all(void) } } +bool video_is_active(void) +{ + struct udevice *dev; + + for (uclass_find_first_device(UCLASS_VIDEO, &dev); + dev; + uclass_find_next_device(&dev)) { + if (device_active(dev)) + return true; + } + + return false; +} + int video_get_xsize(struct udevice *dev) { struct video_priv *priv = dev_get_uclass_priv(dev); diff --git a/include/configs/rpi.h b/include/configs/rpi.h index 55768a4..bc907ac 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -44,7 +44,6 @@ /* GPIO */ #define CONFIG_BCM2835_GPIO /* LCD */ -#define CONFIG_LCD_DT_SIMPLEFB #define CONFIG_VIDEO_BCM2835 /* DFU over USB/UDC */ diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h index 4e2cabf..dab679f 100644 --- a/include/configs/stm32mp15_common.h +++ b/include/configs/stm32mp15_common.h @@ -142,6 +142,10 @@ "env_check=if env info -p -d -q; then env save; fi\0" \ "boot_net_usb_start=true\0" +#ifndef STM32MP_BOARD_EXTRA_ENV +#define STM32MP_BOARD_EXTRA_ENV +#endif + #include <config_distro_bootcmd.h> /* @@ -169,7 +173,8 @@ STM32MP_BOOTCMD \ STM32MP_PARTS_DEFAULT \ BOOTENV \ - STM32MP_EXTRA + STM32MP_EXTRA \ + STM32MP_BOARD_EXTRA_ENV #endif /* ifndef CONFIG_SPL_BUILD */ #endif /* ifdef CONFIG_DISTRO_DEFAULTS*/ diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h index c559cd7..c79f027 100644 --- a/include/configs/stm32mp15_dh_dhsom.h +++ b/include/configs/stm32mp15_dh_dhsom.h @@ -8,6 +8,22 @@ #ifndef __CONFIG_STM32MP15_DH_DHSOM_H__ #define __CONFIG_STM32MP15_DH_DHSOM_H__ +/* PHY needs a longer autoneg timeout */ +#define PHY_ANEG_TIMEOUT 20000 + +#define STM32MP_BOARD_EXTRA_ENV \ + "usb_pgood_delay=1000\0" \ + "update_sf=" /* Erase SPI NOR and install U-Boot from SD */ \ + "setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \ + "load mmc 0:4 ${loadaddr1} /boot/u-boot-spl.stm32 && " \ + "env set filesize1 ${filesize} && " \ + "load mmc 0:4 ${loadaddr} /boot/u-boot.itb && " \ + "sf probe && sf erase 0 0x200000 && " \ + "sf update ${loadaddr1} 0 ${filesize1} && " \ + "sf update ${loadaddr1} 0x40000 ${filesize1} && " \ + "sf update ${loadaddr} 0x80000 ${filesize} && " \ + "env set filesize1 && env set loadaddr1\0" + #include <configs/stm32mp15_common.h> #define CONFIG_SPL_TARGET "u-boot.itb" diff --git a/include/fdt_simplefb.h b/include/fdt_simplefb.h index 7cc305e..41cd740 100644 --- a/include/fdt_simplefb.h +++ b/include/fdt_simplefb.h @@ -8,6 +8,7 @@ #ifndef _FDT_SIMPLEFB_H_ #define _FDT_SIMPLEFB_H_ -int lcd_dt_simplefb_add_node(void *blob); -int lcd_dt_simplefb_enable_existing_node(void *blob); +int fdt_simplefb_add_node(void *blob); +int fdt_simplefb_enable_existing_node(void *blob); +int fdt_simplefb_enable_and_mem_rsv(void *blob); #endif diff --git a/include/video.h b/include/video.h index f14fb15..5ac1387 100644 --- a/include/video.h +++ b/include/video.h @@ -276,6 +276,13 @@ static inline int video_sync_copy_all(struct udevice *dev) #endif +/** + * video_is_active() - Test if one video device it active + * + * @return true if at least one video device is active, else false. + */ +bool video_is_active(void); + #ifndef CONFIG_DM_VIDEO /* Video functions */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index b9c1c61..1e1ef76 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -699,7 +699,6 @@ CONFIG_LBA48 CONFIG_LBDAF CONFIG_LCD_ALIGNMENT CONFIG_LCD_BMP_RLE8 -CONFIG_LCD_DT_SIMPLEFB CONFIG_LCD_INFO CONFIG_LCD_INFO_BELOW_LOGO CONFIG_LCD_IN_PSRAM |