arm: Remove mx28evk board

This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.

Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

14 files changed, 0 insertions, 1171 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ceaa39e..5c1a61a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -741,7 +741,6 @@ dtb-$(CONFIG_TARGET_MX23_OLINUXINO) += \
 	imx23-olinuxino.dtb
 
 dtb-$(CONFIG_MX28) += \
-	imx28-evk.dtb \
 	imx28-xea.dtb
 
 dtb-$(CONFIG_MX51) += \
diff --git a/arch/arm/dts/imx28-evk.dts b/arch/arm/dts/imx28-evk.dts
deleted file mode 100644
index 7e2b0f1..0000000
--- a/arch/arm/dts/imx28-evk.dts
+++ /dev/null
@@ -1,360 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Freescale i.MX28 Evaluation Kit";
-	compatible = "fsl,imx28-evk", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_vddio_sd0: regulator-vddio-sd0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 28 0>;
-	};
-
-	reg_fec_3v3: regulator-fec-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fec-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 15 0>;
-	};
-
-	reg_usb0_vbus: regulator-usb0-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb0_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 9 0>;
-		enable-active-high;
-	};
-
-	reg_usb1_vbus: regulator-usb1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 8 0>;
-		enable-active-high;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 30 0>;
-		enable-active-high;
-	};
-
-	reg_can_3v3: regulator-can-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 13 0>;
-		enable-active-high;
-	};
-
-	reg_lcd_5v: regulator-lcd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
-					     &gpmi_pins_evk>;
-				status = "okay";
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio2 12 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp1: spi@80012000 {
-				compatible = "fsl,imx28-mmc";
-				bus-width = <8>;
-				wp-gpios = <&gpio0 28 0>;
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "sst,sst25vf016b", "jedec,spi-nor";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP1_CMD__GPIO_2_13
-						MX28_PAD_SSP1_DATA3__GPIO_2_15
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-						MX28_PAD_SSP1_SCK__GPIO_2_12
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_AUART2_TX__GPIO_3_9
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pin_gpio3_5: led_gpio3_5@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_evk: gpmi-nand-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPMI_CE1N
-						MX28_PAD_GPMI_RDY1__GPMI_READY1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_evk: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_evk>;
-				status = "okay";
-
-				port {
-					display_out: endpoint {
-						remote-endpoint = <&panel_in>;
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-				fsl,ave-ctrl = <4>;
-				fsl,ave-delay = <2>;
-				fsl,settling = <10>;
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				at24@51 {
-					compatible = "atmel,24c32";
-					pagesize = <32>;
-					reg = <0x51>;
-				};
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				uart-has-rtscts;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_id_pins_a>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-supply = <&reg_fec_3v3>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx28-evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio3_5>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 5 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight_display: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig
index b2026a3..60518a7 100644
--- a/arch/arm/mach-imx/mxs/Kconfig
+++ b/arch/arm/mach-imx/mxs/Kconfig
@@ -39,10 +39,6 @@ choice
 	prompt "MX28 board select"
 	optional
 
-config TARGET_MX28EVK
-	bool "Support mx28evk"
-	select BOARD_EARLY_INIT_F
-
 config TARGET_XEA
 	bool "Support XEA"
 
@@ -51,7 +47,6 @@ endchoice
 config SYS_SOC
 	default "mxs"
 
-source "board/freescale/mx28evk/Kconfig"
 source "board/liebherr/xea/Kconfig"
 
 endif
diff --git a/board/freescale/mx28evk/Kconfig b/board/freescale/mx28evk/Kconfig
deleted file mode 100644
index 39777bd..0000000
--- a/board/freescale/mx28evk/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_MX28EVK
-
-config SYS_BOARD
-	default "mx28evk"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_SOC
-	default "mxs"
-
-config SYS_CONFIG_NAME
-	default "mx28evk"
-
-endif
diff --git a/board/freescale/mx28evk/MAINTAINERS b/board/freescale/mx28evk/MAINTAINERS
deleted file mode 100644
index c565010..0000000
--- a/board/freescale/mx28evk/MAINTAINERS
+++ /dev/null
@@ -1,10 +0,0 @@
-MX28EVK BOARD
-M:	Fabio Estevam <festevam@gmail.com>
-S:	Maintained
-F:	board/freescale/mx28evk/
-F:	arch/arm/dts/imx28-evk.dts
-F:	include/configs/mx28evk.h
-F:	configs/mx28evk_defconfig
-F:	configs/mx28evk_auart_console_defconfig
-F:	configs/mx28evk_nand_defconfig
-F:	configs/mx28evk_spi_defconfig
diff --git a/board/freescale/mx28evk/Makefile b/board/freescale/mx28evk/Makefile
deleted file mode 100644
index 0577604..0000000
--- a/board/freescale/mx28evk/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-ifndef	CONFIG_SPL_BUILD
-obj-y	:= mx28evk.o
-else
-obj-y	:= iomux.o
-endif
diff --git a/board/freescale/mx28evk/README b/board/freescale/mx28evk/README
deleted file mode 100644
index d32f0ef..0000000
--- a/board/freescale/mx28evk/README
+++ /dev/null
@@ -1,62 +0,0 @@
-FREESCALE MX28EVK
-==================
-
-Supported hardware: MX28EVK rev C and D are supported in U-Boot.
-
-Files of the MX28EVK port
---------------------------
-
-arch/arm/cpu/arm926ejs/mxs/	- The CPU support code for the Freescale i.MX28
-arch/arm/include/asm/arch-mxs/	- Header files for the Freescale i.MX28
-board/freescale/mx28evk/	- MX28EVK board specific files
-include/configs/mx28evk.h	- MX28EVK configuration file
-
-Jumper configuration
----------------------
-
-To boot MX28EVK from an SD card, set the boot mode DIP switches as:
-
-   * Boot Mode Select: 1 0 0 1 (Boot from SD card Slot 0 - U42)
-   * JTAG PSWITCH RESET: To the right (reset disabled)
-   * Battery Source: Down
-   * Wall 5V: Up
-   * VDD 5V: To the left (off)
-   * Hold Button: Down (off)
-
-To boot MX28EVK from SPI NOR flash, set the boot mode DIP switches as:
-
-   * Boot Mode Select: 0 0 1 0 (Boot from SSP2)
-   * JTAG PSWITCH RESET: To the right (reset disabled)
-   * Battery Source: Down
-   * Wall 5V: Up
-   * VDD 5V: To the left (off)
-   * Hold Button: Down (off)
-
-Environment Storage
--------------------
-
-There are three targets for mx28evk:
-
-"make mx28evk_config"		- store environment variables into MMC
-
-or
-
-"make mx28evk_nand_config"	- store environment variables into NAND flash
-
-or
-
-"make mx28evk_spi_config"       - store environment variables into SPI NOR flash
-
-Choose the target accordingly.
-
-Note: The mx28evk board does not come with a NAND flash populated from the
-factory. It comes with an empty slot (U23), which allows the insertion of a
-48-pin TSOP flash device.
-
-mx28evk does not come with SPI NOR flash populated from the factory either.
-It is possible to solder a SOIC memory on U49 or use a DIP8 on J89.
-To get SPI communication to work R320, R321,R322 and C178 need to be populated.
-Look in the schematics for the proper component values.
-
-Follow the instructions from doc/imx/common/mxs.txt to generate a bootable
-SD card or to generate a binary to be flashed into SPI NOR.
diff --git a/board/freescale/mx28evk/iomux.c b/board/freescale/mx28evk/iomux.c
deleted file mode 100644
index cc0c858..0000000
--- a/board/freescale/mx28evk/iomux.c
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Freescale MX28EVK IOMUX setup
- *
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/io.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-
-#define	MUX_CONFIG_SSP0	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-#define	MUX_CONFIG_GPMI	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-#define	MUX_CONFIG_ENET	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-#define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
-#define	MUX_CONFIG_SSP2	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
-#define	MUX_CONFIG_LCD	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-
-const iomux_cfg_t iomux_setup[] = {
-	/* DUART */
-	MX28_PAD_PWM0__DUART_RX,
-	MX28_PAD_PWM1__DUART_TX,
-
-	/* MMC0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX28_PAD_SSP1_SCK__GPIO_2_12,
-	/* MMC0 slot power enable */
-	MX28_PAD_PWM3__GPIO_3_28 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-
-#ifdef CONFIG_NAND_MXS
-	/* GPMI NAND */
-	MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_RDN__GPMI_RDN |
-		(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
-#endif
-
-	/* FEC0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
-	/* FEC0 Enable */
-	MX28_PAD_SSP1_DATA3__GPIO_2_15 |
-		(MXS_PAD_12MA | MXS_PAD_3V3),
-	/* FEC0 Reset */
-	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-
-	/* FEC1 */
-	MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
-
-	/* EMI */
-	MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
-
-	MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
-
-	/* SPI2 (for SPI flash) */
-	MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
-	MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
-	MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
-	MX28_PAD_SSP2_SS0__SSP2_D3 |
-		(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
-	/* I2C */
-	MX28_PAD_I2C0_SCL__I2C0_SCL,
-	MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-	/* LCD */
-	MX28_PAD_LCD_D00__LCD_D0 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D01__LCD_D1 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D02__LCD_D2 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D03__LCD_D3 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D04__LCD_D4 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D05__LCD_D5 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D06__LCD_D6 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D07__LCD_D7 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D08__LCD_D8 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D09__LCD_D9 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D18__LCD_D18 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D19__LCD_D19 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D20__LCD_D20 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D21__LCD_D21 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D22__LCD_D22 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D23__LCD_D23 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_RD_E__LCD_VSYNC | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_RS__LCD_DOTCLK | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_CS__LCD_ENABLE | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_RESET__GPIO_3_30 | MUX_CONFIG_LCD, /* LCD power */
-	MX28_PAD_PWM2__GPIO_3_18 | MUX_CONFIG_LCD, /* LCD contrast */
-};
-
-#define HW_DRAM_CTL29	(0x74 >> 2)
-#define CS_MAP		0xf
-#define COLUMN_SIZE	0x2
-#define ADDR_PINS	0x1
-#define APREBIT		0xa
-
-#define HW_DRAM_CTL29_CONFIG	(CS_MAP << 24 | COLUMN_SIZE << 16 | \
-					ADDR_PINS << 8 | APREBIT)
-
-void mxs_adjust_memory_params(uint32_t *dram_vals)
-{
-	dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG;
-}
-
-void board_init_ll(const uint32_t arg, const uint32_t *resptr)
-{
-	mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
-}
diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c
deleted file mode 100644
index 88c3bf3..0000000
--- a/board/freescale/mx28evk/mx28evk.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Freescale MX28EVK board
- *
- * (C) Copyright 2011 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * Based on m28evk.c:
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- */
-
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <asm/global_data.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <linux/delay.h>
-#include <linux/mii.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <errno.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Functions
- */
-int board_early_init_f(void)
-{
-	/* IO0 clock at 480MHz */
-	mxs_set_ioclk(MXC_IOCLK0, 480000);
-	/* IO1 clock at 480MHz */
-	mxs_set_ioclk(MXC_IOCLK1, 480000);
-
-	/* SSP0 clock at 96MHz */
-	mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
-	/* SSP2 clock at 160MHz */
-	mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
-
-#ifdef	CONFIG_CMD_USB
-	mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
-	mxs_iomux_setup_pad(MX28_PAD_AUART2_RX__GPIO_3_8 |
-			MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL);
-	gpio_direction_output(MX28_PAD_AUART2_RX__GPIO_3_8, 1);
-#endif
-
-	/* Power on LCD */
-	gpio_direction_output(MX28_PAD_LCD_RESET__GPIO_3_30, 1);
-
-	/* Set contrast to maximum */
-	gpio_direction_output(MX28_PAD_PWM2__GPIO_3_18, 1);
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	return mxs_dram_init();
-}
-
-int board_init(void)
-{
-	/* Adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	return 0;
-}
diff --git a/configs/mx28evk_auart_console_defconfig b/configs/mx28evk_auart_console_defconfig
deleted file mode 100644
index b9c85d6..0000000
--- a/configs/mx28evk_auart_console_defconfig
+++ /dev/null
@@ -1,59 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX28=y
-CONFIG_SYS_TEXT_BASE=0x40002000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0x40000
-CONFIG_IMX_CONFIG=""
-CONFIG_SPL_TEXT_BASE=0x00001000
-CONFIG_TARGET_MX28EVK=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x42000000
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NO_BSS_LIMIT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),512k(redundant-environment),4m(kernel),512k(fdt),8m(ramdisk),-(filesystem)"
-CONFIG_CMD_UBI=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_USE_BOOTFILE=y
-CONFIG_BOOTFILE="uImage"
-CONFIG_VERSION_VARIABLE=y
-CONFIG_MXS_GPIO=y
-CONFIG_MMC_MXS=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXS=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
-CONFIG_SPI=y
-CONFIG_USB=y
-CONFIG_SPLASH_SCREEN=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig
deleted file mode 100644
index bdfad9f..0000000
--- a/configs/mx28evk_defconfig
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX28=y
-CONFIG_SYS_TEXT_BASE=0x40002000
-CONFIG_SYS_MALLOC_F_LEN=0x400
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0x40000
-CONFIG_IMX_CONFIG=""
-CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx28-evk"
-CONFIG_SPL_TEXT_BASE=0x00001000
-CONFIG_TARGET_MX28EVK=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x42000000
-CONFIG_FIT=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NO_BSS_LIMIT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_DM=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),512k(redundant-environment),4m(kernel),512k(fdt),8m(ramdisk),-(filesystem)"
-CONFIG_CMD_UBI=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_USE_BOOTFILE=y
-CONFIG_BOOTFILE="uImage"
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_NET is not set
-CONFIG_DM=y
-CONFIG_SPL_DM=y
-CONFIG_MXS_GPIO=y
-CONFIG_MMC_MXS=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXS=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_MXS=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_CONS_INDEX=0
-CONFIG_SPI=y
-CONFIG_USB=y
-CONFIG_SPLASH_SCREEN=y
diff --git a/configs/mx28evk_nand_defconfig b/configs/mx28evk_nand_defconfig
deleted file mode 100644
index 136c1d6..0000000
--- a/configs/mx28evk_nand_defconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX28=y
-CONFIG_SYS_TEXT_BASE=0x40002000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0x300000
-CONFIG_IMX_CONFIG=""
-CONFIG_SPL_TEXT_BASE=0x00001000
-CONFIG_TARGET_MX28EVK=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0x380000
-CONFIG_SYS_LOAD_ADDR=0x42000000
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NO_BSS_LIMIT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),512k(redundant-environment),4m(kernel),512k(fdt),8m(ramdisk),-(filesystem)"
-CONFIG_CMD_UBI=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_ENV_RANGE=0x80000
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_USE_BOOTFILE=y
-CONFIG_BOOTFILE="uImage"
-CONFIG_VERSION_VARIABLE=y
-CONFIG_MXS_GPIO=y
-CONFIG_MMC_MXS=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXS=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
-CONFIG_SPI=y
-CONFIG_USB=y
-CONFIG_SPLASH_SCREEN=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/mx28evk_spi_defconfig b/configs/mx28evk_spi_defconfig
deleted file mode 100644
index ab8c34c..0000000
--- a/configs/mx28evk_spi_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX28=y
-CONFIG_SYS_TEXT_BASE=0x40002000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x4000
-CONFIG_IMX_CONFIG=""
-CONFIG_SPL_TEXT_BASE=0x00001000
-CONFIG_TARGET_MX28EVK=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x42000000
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NO_BSS_LIMIT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),512k(redundant-environment),4m(kernel),512k(fdt),8m(ramdisk),-(filesystem)"
-CONFIG_CMD_UBI=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_USE_BOOTFILE=y
-CONFIG_BOOTFILE="uImage"
-CONFIG_VERSION_VARIABLE=y
-CONFIG_MXS_GPIO=y
-CONFIG_MMC_MXS=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXS=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
-CONFIG_SPI=y
-CONFIG_USB=y
-CONFIG_SPLASH_SCREEN=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
deleted file mode 100644
index 9f3ac48..0000000
--- a/include/configs/mx28evk.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011 Freescale Semiconductor, Inc.
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * Based on m28evk.h:
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- */
-#ifndef __CONFIGS_MX28EVK_H__
-#define __CONFIGS_MX28EVK_H__
-
-/* Memory configuration */
-#define PHYS_SDRAM_1			0x40000000	/* Base address */
-#define PHYS_SDRAM_1_SIZE		0x40000000	/* Max 1 GB RAM */
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-
-/* UBI and NAND partitioning */
-
-/* RTC */
-#ifdef	CONFIG_CMD_DATE
-#define	CONFIG_RTC_MXS
-#endif
-
-/* USB */
-
-/* Framebuffer support */
-#ifdef CONFIG_DM_VIDEO
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(512 << 10)
-#endif
-
-/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"ubifs_file=filesystem.ubifs\0" \
-	"update_nand_full_filename=u-boot.nand\0" \
-	"update_nand_firmware_filename=u-boot.sb\0"	\
-	"update_nand_firmware_maxsz=0x100000\0"	\
-	"update_nand_stride=0x40\0"	/* MX28 datasheet ch. 12.12 */ \
-	"update_nand_count=0x4\0"	/* MX28 datasheet ch. 12.12 */ \
-	"update_nand_get_fcb_size="	/* Get size of FCB blocks */ \
-		"nand device 0 ; " \
-		"nand info ; " \
-		"setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
-		"setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
-	"update_nand_firmware_full=" /* Update FCB, DBBT and FW */ \
-		"if tftp ${update_nand_full_filename} ; then " \
-		"run update_nand_get_fcb_size ; " \
-		"nand scrub -y 0x0 ${filesize} ; " \
-		"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \
-		"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
-		"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
-		"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
-		"fi\0" \
-	"update_nand_firmware="		/* Update only firmware */ \
-		"if tftp ${update_nand_firmware_filename} ; then " \
-		"run update_nand_get_fcb_size ; " \
-		"setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
-		"setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \
-		"setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
-		"nand erase ${fcb_sz} ${fw_sz} ; " \
-		"nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
-		"nand write ${loadaddr} ${fw_off} ${filesize} ; " \
-		"fi\0" \
-	"update_nand_kernel="		/* Update kernel */ \
-		"mtdparts default; " \
-		"nand erase.part kernel; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${image}; " \
-		"nand write ${loadaddr} kernel ${filesize}\0" \
-	"update_nand_fdt="		/* Update fdt */ \
-		"mtdparts default; " \
-		"nand erase.part fdt; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${fdt_file}; " \
-		"nand write ${loadaddr} fdt ${filesize}\0" \
-	"update_nand_filesystem="		/* Update filesystem */ \
-		"mtdparts default; " \
-		"nand erase.part filesystem; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${ubifs_file}; " \
-		"ubi part filesystem; " \
-		"ubi create filesystem; " \
-		"ubi write ${loadaddr} filesystem ${filesize}\0" \
-	"nandargs=setenv bootargs console=${console_mainline},${baudrate} " \
-		"rootfstype=ubifs ubi.mtd=6 root=ubi0_0 ${mtdparts}\0" \
-	"nandboot="		/* Boot from NAND */ \
-		"mtdparts default; " \
-		"run nandargs; " \
-		"nand read ${loadaddr} kernel 0x00400000; " \
-		"if test ${boot_fdt} = yes; then " \
-			"nand read ${fdt_addr} fdt 0x00080000; " \
-			"bootz ${loadaddr} - ${fdt_addr}; " \
-		"else " \
-			"if test ${boot_fdt} = no; then " \
-				"bootz; " \
-			"else " \
-				"echo \"ERROR: Set boot_fdt to yes or no.\"; " \
-			"fi; " \
-		"fi\0" \
-	"update_sd_firmware_filename=u-boot.sd\0" \
-	"update_sd_firmware="		/* Update the SD firmware partition */ \
-		"if mmc rescan ; then "	\
-		"if tftp ${update_sd_firmware_filename} ; then " \
-		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
-		"setexpr fw_sz ${fw_sz} + 1 ; "	\
-		"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
-		"fi ; "	\
-		"fi\0" \
-	"script=boot.scr\0"	\
-	"image=zImage\0" \
-	"console_fsl=ttyAM0\0" \
-	"console_mainline=ttyAMA0\0" \
-	"fdt_file=imx28-evk.dtb\0" \
-	"fdt_addr=0x41000000\0" \
-	"boot_fdt=try\0" \
-	"ip_dyn=yes\0" \
-	"mmcdev=0\0" \
-	"mmcpart=2\0" \
-	"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
-	"mmcargs=setenv bootargs console=${console_mainline},${baudrate} " \
-		"root=${mmcroot}\0" \
-	"loadbootscript="  \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; "	\
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console_mainline},${baudrate} " \
-		"root=/dev/nfs " \
-		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-	"netboot=echo Booting from net ...; " \
-		"run netargs; "	\
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${image}; " \
-		"if test ${boot_fdt} = yes; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi;" \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0"
-
-/* The rest of the configuration is shared */
-#include <configs/mxs.h>
-
-#endif /* __CONFIGS_MX28EVK_H__ */