diff options
author | Tom Rini <trini@konsulko.com> | 2022-03-21 21:33:29 -0400 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2022-04-01 10:28:45 -0400 |
commit | 439cc7fb05080f11eda2008f03b52bb6401ec45b (patch) | |
tree | f0a01f07d083aec4588b5d7791f5723c2d3940a1 | |
parent | 694943cf2ad53df22d48d0e30e56560cb1e6d211 (diff) | |
download | u-boot-439cc7fb05080f11eda2008f03b52bb6401ec45b.zip u-boot-439cc7fb05080f11eda2008f03b52bb6401ec45b.tar.gz u-boot-439cc7fb05080f11eda2008f03b52bb6401ec45b.tar.bz2 |
Finish converting CONFIG_BOOTM_NETBSD et al to Kconfig
This converts the following to Kconfig:
CONFIG_BOOTM_NETBSD
CONFIG_BOOTM_RTEMS
CONFIG_DESIGNWARE_WATCHDOG
CONFIG_DISPLAY_CPUINFO
CONFIG_DM_ETH
CONFIG_DM_MMC
CONFIG_DM_REGULATOR
CONFIG_DM_SPI
CONFIG_DM_SPI_FLASH
CONFIG_ISO_PARTITION
CONFIG_OF_SEPARATE
CONFIG_SPI_FLASH_WINBOND
CONFIG_SPL_ETH
CONFIG_TIMER
CONFIG_USB_DWC3
CONFIG_USB_DWC3_GADGET
CONFIG_USB_DWC3_OMAP
CONFIG_USB_DWC3_PHY_OMAP
CONFIG_USB_EHCI_TEGRA
CONFIG_USB_GADGET_DOWNLOAD
CONFIG_USB_GADGET_DUALSPEED
CONFIG_USB_GADGET_MANUFACTURER
CONFIG_USB_GADGET_PRODUCT_NUM
CONFIG_USB_GADGET_VBUS_DRAW
CONFIG_USB_GADGET_VENDOR_NUM
This catches a number of cases where board config files were #undef
various CONFIG options when building SPL, and that doesn't work. Clean
up the related comments as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
28 files changed, 2 insertions, 158 deletions
diff --git a/configs/s5p4418_nanopi2_defconfig b/configs/s5p4418_nanopi2_defconfig index 0e17e75..02c17d0 100644 --- a/configs/s5p4418_nanopi2_defconfig +++ b/configs/s5p4418_nanopi2_defconfig @@ -27,6 +27,8 @@ CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="nanopi2# " CONFIG_CMD_BOOTZ=y +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_RTEMS is not set CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/include/config_uncmd_spl.h b/include/config_uncmd_spl.h index af7e3e4..a59b9bb 100644 --- a/include/config_uncmd_spl.h +++ b/include/config_uncmd_spl.h @@ -13,7 +13,6 @@ #ifndef CONFIG_SPL_DM #undef CONFIG_DM_SERIAL #undef CONFIG_DM_I2C -#undef CONFIG_DM_SPI #endif #undef CONFIG_DM_STDIO diff --git a/include/configs/adp-ae3xx.h b/include/configs/adp-ae3xx.h index cac7847..e54a2b6 100644 --- a/include/configs/adp-ae3xx.h +++ b/include/configs/adp-ae3xx.h @@ -17,12 +17,6 @@ #define CONFIG_SKIP_TRUNOFF_WATCHDOG -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#ifdef CONFIG_OF_CONTROL -#undef CONFIG_OF_SEPARATE -#endif -#endif - /* * Timer */ diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index d05a4d0..bfaa7f9 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -19,12 +19,6 @@ #define CONFIG_MEM_REMAP #endif -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#ifdef CONFIG_OF_CONTROL -#undef CONFIG_OF_SEPARATE -#endif -#endif - /* * Timer */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 4db04ff..e786672 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -196,26 +196,6 @@ #endif #endif /* !CONFIG_MTD_RAW_NAND */ -/* - * For NOR boot, we must set this to the start of where NOR is mapped - * in memory. - */ - -/* - * Disable MMC DM for SPL build and can be re-enabled after adding - * DM support in SPL - */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_MMC -#undef CONFIG_TIMER -#endif - -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USB_ETHER) -/* Remove other SPL modes. */ -/* disable host part of MUSB in SPL */ -/* disable EFI partitions and partition UUID support */ -#endif - /* USB Device Firmware Update support */ #ifndef CONFIG_SPL_BUILD #define DFUARGS \ diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index 62d64ff..4c8df57 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -148,14 +148,4 @@ /* PMIC support */ #define CONFIG_POWER_TPS65217 -/* SPL */ - -/* - * Disable MMC DM for SPL build and can be re-enabled after adding - * DM support in SPL - */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_MMC -#undef CONFIG_TIMER -#endif #endif /* ! __CONFIG_AM335X_SHC_H */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index e4bd13b..5057441 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -56,28 +56,6 @@ #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 #endif -#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_GADGET) -#undef CONFIG_USB_DWC3_PHY_OMAP -#undef CONFIG_USB_DWC3_OMAP -#undef CONFIG_USB_DWC3 -#undef CONFIG_USB_DWC3_GADGET - -#undef CONFIG_USB_GADGET_DOWNLOAD -#undef CONFIG_USB_GADGET_VBUS_DRAW -#undef CONFIG_USB_GADGET_MANUFACTURER -#undef CONFIG_USB_GADGET_VENDOR_NUM -#undef CONFIG_USB_GADGET_PRODUCT_NUM -#undef CONFIG_USB_GADGET_DUALSPEED -#endif - -/* - * Disable MMC DM for SPL build and can be re-enabled after adding - * DM support in SPL - */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_TIMER -#endif - #ifndef CONFIG_SPL_BUILD /* USB Device Firmware Update support */ #define DFUARGS \ diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h index aa2a07e..ad1cd86 100644 --- a/include/configs/chiliboard.h +++ b/include/configs/chiliboard.h @@ -125,16 +125,6 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 -/* NAND: SPL related configs */ - -/* - * Disable MMC DM for SPL build and can be re-enabled after adding - * DM support in SPL - */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_MMC -#undef CONFIG_TIMER -#endif #if defined(CONFIG_ENV_IS_IN_NAND) #define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE diff --git a/include/configs/display5.h b/include/configs/display5.h index 72526d9..7bd6533 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -33,12 +33,6 @@ * 0x1F00000 - 0x2000000 : SPI.factory (1MiB) */ -/* SPI Flash Configs */ -#if defined(CONFIG_SPL_BUILD) -#undef CONFIG_DM_SPI -#undef CONFIG_DM_SPI_FLASH -#endif - /* Below values are "dummy" - only to avoid build break */ #define CONFIG_SYS_SPI_KERNEL_OFFS 0x150000 #define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index d75fcf7..f521add 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -33,7 +33,6 @@ func(MMC, mmc, 2) \ func(MMC, mmc, 0) #include <config_distro_bootcmd.h> -#undef CONFIG_ISO_PARTITION #else #define BOOTENV #endif diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index 1ec27f4..a4abf1f 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -41,7 +41,6 @@ func(MMC, mmc, 2) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#undef CONFIG_ISO_PARTITION #else #define BOOTENV #endif diff --git a/include/configs/imx8mn_venice.h b/include/configs/imx8mn_venice.h index c01a590c..81f9574 100644 --- a/include/configs/imx8mn_venice.h +++ b/include/configs/imx8mn_venice.h @@ -38,7 +38,6 @@ func(MMC, mmc, 2) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#undef CONFIG_ISO_PARTITION #else #define BOOTENV #endif diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index fe07a3c..5b185cf 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -26,8 +26,6 @@ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE -#undef CONFIG_DM_MMC - #define CONFIG_POWER_PCA9450 #endif diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 8fff3bf..7389d75 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -29,8 +29,6 @@ /* For RAW image gives a error info not panic */ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE -#undef CONFIG_DM_MMC - #define CONFIG_POWER_PFUZE100 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 #endif diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index 6919f6d..f40caca 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -25,8 +25,6 @@ #define CONFIG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE - -#undef CONFIG_DM_MMC #endif /* ENET Config */ diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 121fd3c..0c73a9e 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -17,7 +17,6 @@ #define SPL_NO_SATA #define SPL_NO_QSPI #define SPL_NO_IFC -#undef CONFIG_DISPLAY_CPUINFO #endif #include <asm/arch/stream_id_lsch3.h> @@ -131,8 +130,6 @@ unsigned long long get_qixis_addr(void); #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 -/* #define CONFIG_DISPLAY_CPUINFO */ - #ifndef SPL_NO_ENV /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/novena.h b/include/configs/novena.h index c11d13a..dbde7a0 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -42,11 +42,6 @@ /* SPL */ #include "imx6_spl.h" /* common IMX6 SPL configuration */ -/* Ethernet Configuration */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_ETH -#endif - /* I2C */ #define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h index 2810418..a27093f 100644 --- a/include/configs/opos6uldev.h +++ b/include/configs/opos6uldev.h @@ -12,10 +12,6 @@ #ifdef CONFIG_SPL #include "imx6_spl.h" - -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_REGULATOR -#endif #endif /* Miscellaneous configurable options */ diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 26946cd..a7ad4f3 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -25,8 +25,6 @@ #define CONFIG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE - -#undef CONFIG_DM_MMC #endif /* ENET Config */ diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index f1f5d07..380156b 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -28,16 +28,6 @@ #define CONFIG_SYS_MONITOR_BASE 0x00000000 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) -/* ENV setting */ - -/* Common ENV setting */ - -/* SF MTD */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_SPI -#undef CONFIG_DM_SPI_FLASH -#endif - /* Timer */ #define CONFIG_TMU_TIMER #define CONFIG_SYS_TIMER_COUNTS_DOWN diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h index 632fc0c..f0c72ca 100644 --- a/include/configs/s5p4418_nanopi2.h +++ b/include/configs/s5p4418_nanopi2.h @@ -89,12 +89,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /*----------------------------------------------------------------------- - * Etc Command definition - */ -#undef CONFIG_BOOTM_NETBSD -#undef CONFIG_BOOTM_RTEMS - -/*----------------------------------------------------------------------- * serial console configuration */ #define CONFIG_PL011_CLOCK 50000000 diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index a06ac6b..601826d 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -137,9 +137,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); /* * L4 Watchdog */ -#ifndef CONFIG_SPL_BUILD -#undef CONFIG_DESIGNWARE_WATCHDOG -#endif #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS #ifdef CONFIG_TARGET_SOCFPGA_STRATIX10 #ifndef __ASSEMBLY__ diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 7cb8d64..d9d89b6 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -95,14 +95,4 @@ #define CONFIG_TEGRA_SPI #endif -/* overrides for SPL build here */ -#ifdef CONFIG_SPL_BUILD - -/* remove USB */ -#ifdef CONFIG_USB_EHCI_TEGRA -#undef CONFIG_USB_EHCI_TEGRA -#endif - -#endif /* CONFIG_SPL_BUILD */ - #endif /* __TEGRA_COMMON_POST_H */ diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 05f7874..c2dfdeb 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -68,16 +68,4 @@ #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ CONFIG_SPL_TEXT_BASE) -/* Since SPL did pll and ddr initialization for us, - * we don't need to do it twice. - */ - -/* - * Disable MMC DM for SPL build and can be re-enabled after adding - * DM support in SPL - */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_MMC -#undef CONFIG_TIMER -#endif #endif diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 270ef95..714a1c5 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -307,8 +307,5 @@ #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_TIMER -#endif #endif /* __CONFIG_TI_OMAP5_COMMON_H */ diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index ba6c3f0..f859656 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -17,18 +17,10 @@ /* Fixup settings */ /* SPL settings */ -#undef CONFIG_SPL_ETH #undef CONFIG_SPL_MAX_FOOTPRINT #define CONFIG_SPL_MAX_FOOTPRINT CONFIG_SYS_SPI_U_BOOT_OFFS #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -/* FPGA commands that we don't use */ - -/* Extras */ - -/* Faster flash, ours may run at 108 MHz */ -#undef CONFIG_SPI_FLASH_WINBOND - /* Setup proper boot sequences for Miami boards */ #if defined(CONFIG_USB_HOST) diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index de84e3b..9fe6231 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -42,7 +42,6 @@ func(MMC, mmc, 0) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#undef CONFIG_ISO_PARTITION #else #define BOOTENV #endif diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h index 9a7dedf..9e29dc1 100644 --- a/include/configs/verdin-imx8mp.h +++ b/include/configs/verdin-imx8mp.h @@ -54,7 +54,6 @@ func(MMC, mmc, 2) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#undef CONFIG_ISO_PARTITION #else #define BOOTENV #endif |