add serial console support

Redirect int10 calls to serial console output.
Parse serial input and queue key events.
The serial console can work both as primary display
and in parallel to another vga display (splitmode).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

10 files changed, 739 insertions, 18 deletions

diff --git a/Makefile b/Makefile
index a0158ed..eb8ad58 100644
--- a/Makefile
+++ b/Makefile
@@ -29,8 +29,8 @@ LD32BIT_FLAG:=-melf_i386
 
 # Source files
 SRCBOTH=misc.c stacks.c output.c string.c block.c cdrom.c disk.c mouse.c kbd.c \
-    system.c serial.c clock.c resume.c pnpbios.c vgahooks.c pcibios.c apm.c \
-    cp437.c \
+    system.c serial.c sercon.c clock.c resume.c pnpbios.c vgahooks.c pcibios.c \
+    apm.c cp437.c \
     hw/pci.c hw/timer.c hw/rtc.c hw/dma.c hw/pic.c hw/ps2port.c hw/serialio.c \
     hw/usb.c hw/usb-uhci.c hw/usb-ohci.c hw/usb-ehci.c \
     hw/usb-hid.c hw/usb-msc.c hw/usb-uas.c \
diff --git a/src/Kconfig b/src/Kconfig
index 77ec9c7..55a87cb 100644
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -306,6 +306,11 @@ menu "Hardware support"
         default y
         help
             Support serial ports.  This also enables int 14 serial port calls.
+    config SERCON
+        bool "Serial console"
+        default y
+        help
+            Support redirecting vga output to the serial console.
     config LPT
         bool "Parallel port"
         default y
diff --git a/src/clock.c b/src/clock.c
index e83e0f3..e44e112 100644
--- a/src/clock.c
+++ b/src/clock.c
@@ -295,6 +295,7 @@ clock_update(void)
     floppy_tick();
     usb_check_event();
     ps2_check_event();
+    sercon_check_event();
 }
 
 // INT 08h System Timer ISR Entry Point
diff --git a/src/config.h b/src/config.h
index baca029..93c8dbc 100644
--- a/src/config.h
+++ b/src/config.h
@@ -76,7 +76,6 @@
 #define DEBUG_ISR_08 20
 #define DEBUG_ISR_09 9
 #define DEBUG_ISR_0e 9
-#define DEBUG_HDL_10 20
 #define DEBUG_HDL_11 2
 #define DEBUG_HDL_12 2
 #define DEBUG_HDL_13 10
diff --git a/src/misc.c b/src/misc.c
index f02237c..b511730 100644
--- a/src/misc.c
+++ b/src/misc.c
@@ -51,14 +51,6 @@ handle_05(struct bregs *regs)
     debug_enter(regs, DEBUG_HDL_05);
 }
 
-// INT 10h Video Support Service Entry Point
-void VISIBLE16
-handle_10(struct bregs *regs)
-{
-    debug_enter(regs, DEBUG_HDL_10);
-    // don't do anything, since the VGA BIOS handles int10h requests
-}
-
 // NMI handler
 void VISIBLE16
 handle_02(void)
diff --git a/src/optionroms.c b/src/optionroms.c
index 65f7fe0..092393a 100644
--- a/src/optionroms.c
+++ b/src/optionroms.c
@@ -432,12 +432,9 @@ vgarom_setup(void)
     run_file_roms("vgaroms/", 1, NULL);
     rom_reserve(0);
 
-    if (rom_get_last() == BUILD_ROM_START)
-        // No VGA rom found
-        return;
-
-    VgaROM = (void*)BUILD_ROM_START;
-    enable_vga_console();
+    if (rom_get_last() != BUILD_ROM_START)
+        // VGA rom found
+        VgaROM = (void*)BUILD_ROM_START;
 }
 
 void
diff --git a/src/post.c b/src/post.c
index 2a06d44..f93106a 100644
--- a/src/post.c
+++ b/src/post.c
@@ -208,6 +208,8 @@ maininit(void)
 
     // Run vga option rom
     vgarom_setup();
+    sercon_setup();
+    enable_vga_console();
 
     // Do hardware initialization (if running synchronously)
     if (!threads_during_optionroms()) {
diff --git a/src/romlayout.S b/src/romlayout.S
index 89b3784..c4a4635 100644
--- a/src/romlayout.S
+++ b/src/romlayout.S
@@ -414,6 +414,53 @@ __csm_return:
         popfw
         lretw
 
+// Serial console "hooked vga" entry point
+        DECLFUNC entry_sercon
+entry_sercon:
+        // Setup for chain loading to real vga handler
+        pushfw
+        pushl %cs:sercon_real_vga_handler
+
+        // Set %ds to varlow segment
+        cli
+        cld
+        pushw %ds
+        pushl %eax
+        movl $_zonelow_seg, %eax
+        movl %eax, %ds
+
+        // Test if the sercon handler can be called
+        movl %esp, %eax         // Test for broken x86emu
+        pushl $1f
+        retl
+1:      cmpl %esp, %eax
+        jne 4f
+        cmpb $0, sercon_enable  // Test that sercon is enabled
+        je 3f
+
+        // call handle_sercon
+        popl %eax
+        popw %ds
+2:      pushl $handle_sercon
+#if CONFIG_ENTRY_EXTRASTACK
+        jmp irqentry_arg_extrastack
+#else
+        jmp irqentry_arg
+#endif
+
+        // sercon disabled - check for legacy text modeset and otherwise exit
+3:      popl %eax
+        popw %ds
+        cmpw $0x0007, %ax
+        jle 2b
+        iretw
+
+        // Running on broken x86emu - restore stack and exit
+4:      movl %eax, %esp
+        popl %eax
+        popw %ds
+        iretw
+
 
 /****************************************************************
  * Interrupt entry points
@@ -597,7 +644,8 @@ entry_10_0x0f:
         iretw
 
         ORG 0xf065
-        IRQ_ENTRY_ARG 10
+entry_10:
+        iretw
 
         // 0xf0a4 - VideoParams in misc.c
 
diff --git a/src/sercon.c b/src/sercon.c
new file mode 100644
index 0000000..5d27051
--- /dev/null
+++ b/src/sercon.c
@@ -0,0 +1,673 @@
+// serial console support
+//
+// Copyright (C) 2016 Gerd Hoffmann <kraxel@redhat.com>
+//
+// This file may be distributed under the terms of the GNU LGPLv3 license.
+
+#include "biosvar.h" // SET_BDA
+#include "bregs.h" // struct bregs
+#include "stacks.h" // yield
+#include "output.h" // dprintf
+#include "util.h" // irqtimer_calc_ticks
+#include "string.h" // memcpy
+#include "romfile.h" // romfile_loadint
+#include "hw/serialio.h" // SEROFF_IER
+#include "cp437.h"
+
+static u8 video_rows(void)
+{
+    return GET_BDA(video_rows)+1;
+}
+
+static u8 video_cols(void)
+{
+    return GET_BDA(video_cols);
+}
+
+static u8 cursor_pos_col(void)
+{
+    u16 pos = GET_BDA(cursor_pos[0]);
+    return pos & 0xff;
+}
+
+static u8 cursor_pos_row(void)
+{
+    u16 pos = GET_BDA(cursor_pos[0]);
+    return (pos >> 8) & 0xff;
+}
+
+static void cursor_pos_set(u8 row, u8 col)
+{
+    u16 pos = ((u16)row << 8) | col;
+    SET_BDA(cursor_pos[0], pos);
+}
+
+/****************************************************************
+ * serial console output
+ ****************************************************************/
+
+VARLOW u16 sercon_port;
+VARLOW u8 sercon_split;
+VARLOW u8 sercon_enable;
+VARFSEG struct segoff_s sercon_real_vga_handler;
+
+/*
+ * We have a small output buffer here, for lazy output.  That allows
+ * to avoid a whole bunch of control sequences for pointless cursor
+ * moves, so when logging the output it'll be *alot* less cluttered.
+ *
+ * sercon_char/attr  is the actual output buffer.
+ * sercon_attr_last  is the most recent attribute sent to the terminal.
+ * sercon_col_last   is the most recent column sent to the terminal.
+ * sercon_row_last   is the most recent row sent to the terminal.
+ */
+VARLOW u8 sercon_attr_last;
+VARLOW u8 sercon_col_last;
+VARLOW u8 sercon_row_last;
+VARLOW u8 sercon_char;
+VARLOW u8 sercon_attr = 0x07;
+
+static VAR16 u8 sercon_cmap[8] = { '0', '4', '2', '6', '1', '5', '3', '7' };
+
+static int sercon_splitmode(void)
+{
+    return GET_LOW(sercon_split);
+}
+
+static void sercon_putchar(u8 chr)
+{
+    u16 addr = GET_LOW(sercon_port);
+    u32 end = irqtimer_calc_ticks(0x0a);
+
+#if 0
+    /* for visual control sequence debugging */
+    if (chr == '\x1b')
+        chr = '*';
+#endif
+
+    for (;;) {
+        u8 lsr = inb(addr+SEROFF_LSR);
+        if ((lsr & 0x60) == 0x60) {
+            // Success - can write data
+            outb(chr, addr+SEROFF_DATA);
+            break;
+        }
+        if (irqtimer_check(end)) {
+            break;
+        }
+        yield();
+    }
+}
+
+static void sercon_term_reset(void)
+{
+    sercon_putchar('\x1b');
+    sercon_putchar('c');
+}
+
+static void sercon_term_clear_screen(void)
+{
+    sercon_putchar('\x1b');
+    sercon_putchar('[');
+    sercon_putchar('2');
+    sercon_putchar('J');
+}
+
+static void sercon_term_no_linewrap(void)
+{
+    sercon_putchar('\x1b');
+    sercon_putchar('[');
+    sercon_putchar('?');
+    sercon_putchar('7');
+    sercon_putchar('l');
+}
+
+static void sercon_term_cursor_goto(u8 row, u8 col)
+{
+    row++; col++;
+    sercon_putchar('\x1b');
+    sercon_putchar('[');
+    sercon_putchar('0' + row / 10);
+    sercon_putchar('0' + row % 10);
+    sercon_putchar(';');
+    sercon_putchar('0' + col / 10);
+    sercon_putchar('0' + col % 10);
+    sercon_putchar('H');
+}
+
+static void sercon_term_set_color(u8 fg, u8 bg, u8 bold)
+{
+    sercon_putchar('\x1b');
+    sercon_putchar('[');
+    sercon_putchar('0');
+    if (fg != 7) {
+        sercon_putchar(';');
+        sercon_putchar('3');
+        sercon_putchar(GET_GLOBAL(sercon_cmap[fg & 7]));
+    }
+    if (bg != 0) {
+        sercon_putchar(';');
+        sercon_putchar('4');
+        sercon_putchar(GET_GLOBAL(sercon_cmap[bg & 7]));
+    }
+    if (bold) {
+        sercon_putchar(';');
+        sercon_putchar('1');
+    }
+    sercon_putchar('m');
+}
+
+static void sercon_set_attr(u8 attr)
+{
+    if (attr == GET_LOW(sercon_attr_last))
+        return;
+
+    SET_LOW(sercon_attr_last, attr);
+    sercon_term_set_color((attr >> 0) & 7,
+                          (attr >> 4) & 7,
+                          attr & 0x08);
+}
+
+static void sercon_print_utf8(u8 chr)
+{
+    u16 unicode = cp437_to_unicode(chr);
+
+    if (unicode < 0x7f) {
+        sercon_putchar(unicode);
+    } else if (unicode < 0x7ff) {
+        sercon_putchar(0xc0 | ((unicode >>  6) & 0x1f));
+        sercon_putchar(0x80 | ((unicode >>  0) & 0x3f));
+    } else {
+        sercon_putchar(0xe0 | ((unicode >> 12) & 0x0f));
+        sercon_putchar(0x80 | ((unicode >>  6) & 0x3f));
+        sercon_putchar(0x80 | ((unicode >>  0) & 0x3f));
+    }
+}
+
+static void sercon_cursor_pos_set(u8 row, u8 col)
+{
+    if (!sercon_splitmode()) {
+        cursor_pos_set(row, col);
+    } else {
+        /* let vgabios update cursor */
+    }
+}
+
+static void sercon_lazy_cursor_sync(void)
+{
+    u8 row = cursor_pos_row();
+    u8 col = cursor_pos_col();
+
+    if (GET_LOW(sercon_row_last) == row &&
+        GET_LOW(sercon_col_last) == col)
+        return;
+
+    if (col == 0 && GET_LOW(sercon_row_last) <= row) {
+        if (GET_LOW(sercon_col_last) != 0) {
+            sercon_putchar('\r');
+            SET_LOW(sercon_col_last, 0);
+        }
+        while (GET_LOW(sercon_row_last) < row) {
+            sercon_putchar('\n');
+            SET_LOW(sercon_row_last, GET_LOW(sercon_row_last)+1);
+        }
+        if (GET_LOW(sercon_row_last) == row &&
+            GET_LOW(sercon_col_last) == col)
+            return;
+    }
+
+    sercon_term_cursor_goto(row, col);
+    SET_LOW(sercon_row_last, row);
+    SET_LOW(sercon_col_last, col);
+}
+
+static void sercon_lazy_flush(void)
+{
+    u8 chr, attr;
+
+    chr = GET_LOW(sercon_char);
+    attr = GET_LOW(sercon_attr);
+    if (chr) {
+        sercon_set_attr(attr);
+        sercon_print_utf8(chr);
+        SET_LOW(sercon_col_last, GET_LOW(sercon_col_last) + 1);
+    }
+
+    sercon_lazy_cursor_sync();
+
+    SET_LOW(sercon_attr, 0x07);
+    SET_LOW(sercon_char, 0x00);
+}
+
+static void sercon_lazy_cursor_update(u8 row, u8 col)
+{
+    sercon_cursor_pos_set(row, col);
+    SET_LOW(sercon_row_last, row);
+    SET_LOW(sercon_col_last, col);
+}
+
+static void sercon_lazy_backspace(void)
+{
+    u8 col;
+
+    sercon_lazy_flush();
+    col = cursor_pos_col();
+    if (col > 0) {
+        sercon_putchar(8);
+        sercon_lazy_cursor_update(cursor_pos_row(), col-1);
+    }
+}
+
+static void sercon_lazy_cr(void)
+{
+    sercon_cursor_pos_set(cursor_pos_row(), 0);
+}
+
+static void sercon_lazy_lf(void)
+{
+    u8 row;
+
+    row = cursor_pos_row() + 1;
+    if (row >= video_rows()) {
+        /* scrolling up */
+        row = video_rows()-1;
+        if (GET_LOW(sercon_row_last) > 0) {
+            SET_LOW(sercon_row_last, GET_LOW(sercon_row_last) - 1);
+        }
+    }
+    sercon_cursor_pos_set(row, cursor_pos_col());
+}
+
+static void sercon_lazy_move_cursor(void)
+{
+    u8 col;
+
+    col = cursor_pos_col() + 1;
+    if (col >= video_cols()) {
+        sercon_lazy_cr();
+        sercon_lazy_lf();
+    } else {
+        sercon_cursor_pos_set(cursor_pos_row(), col);
+    }
+}
+
+static void sercon_lazy_putchar(u8 chr, u8 attr, u8 teletype)
+{
+    if (cursor_pos_row() != GET_LOW(sercon_row_last) ||
+        cursor_pos_col() != GET_LOW(sercon_col_last)) {
+        sercon_lazy_flush();
+    }
+
+    SET_LOW(sercon_char, chr);
+    if (teletype)
+        sercon_lazy_move_cursor();
+    else
+        SET_LOW(sercon_attr, attr);
+}
+
+/* Set video mode */
+static void sercon_1000(struct bregs *regs)
+{
+    u8 clearscreen = !(regs->al & 0x80);
+    u8 mode = regs->al & 0x7f;
+    u8 rows, cols;
+
+    if (!sercon_splitmode()) {
+        switch (mode) {
+        case 0x00:
+        case 0x01:
+        case 0x04: /* 320x200 */
+        case 0x05: /* 320x200 */
+            cols = 40;
+            rows = 25;
+            regs->al = 0x30;
+            break;
+        case 0x02:
+        case 0x03:
+        case 0x06: /* 640x200 */
+        case 0x07:
+        default:
+            cols = 80;
+            rows = 25;
+            regs->al = 0x30;
+            break;
+        }
+        cursor_pos_set(0, 0);
+        SET_BDA(video_mode, mode);
+        SET_BDA(video_cols, cols);
+        SET_BDA(video_rows, rows-1);
+        SET_BDA(cursor_type, 0x0007);
+    } else {
+        /* let vgabios handle mode init */
+    }
+
+    SET_LOW(sercon_enable, mode <= 0x07);
+    SET_LOW(sercon_col_last, 0);
+    SET_LOW(sercon_row_last, 0);
+    SET_LOW(sercon_attr_last, 0);
+
+    sercon_term_reset();
+    sercon_term_no_linewrap();
+    if (clearscreen)
+        sercon_term_clear_screen();
+}
+
+/* Set text-mode cursor shape */
+static void sercon_1001(struct bregs *regs)
+{
+    /* show/hide cursor? */
+    SET_BDA(cursor_type, regs->cx);
+}
+
+/* Set cursor position */
+static void sercon_1002(struct bregs *regs)
+{
+    sercon_cursor_pos_set(regs->dh, regs->dl);
+}
+
+/* Get cursor position */
+static void sercon_1003(struct bregs *regs)
+{
+    regs->cx = GET_BDA(cursor_type);
+    regs->dh = cursor_pos_row();
+    regs->dl = cursor_pos_col();
+}
+
+/* Scroll up window */
+static void sercon_1006(struct bregs *regs)
+{
+    sercon_lazy_flush();
+    if (regs->al == 0) {
+        /* clear rect, do only in case this looks like a fullscreen clear */
+        if (regs->ch == 0 &&
+            regs->cl == 0 &&
+            regs->dh == video_rows()-1 &&
+            regs->dl == video_cols()-1) {
+            sercon_set_attr(regs->bh);
+            sercon_term_clear_screen();
+        }
+    } else {
+        sercon_putchar('\r');
+        sercon_putchar('\n');
+    }
+}
+
+/* Read character and attribute at cursor position */
+static void sercon_1008(struct bregs *regs)
+{
+    regs->ah = 0x07;
+    regs->bh = ' ';
+}
+
+/* Write character and attribute at cursor position */
+static void sercon_1009(struct bregs *regs)
+{
+    u16 count = regs->cx;
+
+    if (count == 1) {
+        sercon_lazy_putchar(regs->al, regs->bl, 0);
+
+    } else if (regs->al == 0x20 &&
+               video_rows() * video_cols() == count &&
+               cursor_pos_row() == 0 &&
+               cursor_pos_col() == 0) {
+        /* override everything with spaces -> this is clear screen */
+        sercon_lazy_flush();
+        sercon_set_attr(regs->bl);
+        sercon_term_clear_screen();
+
+    } else {
+        sercon_lazy_flush();
+        sercon_set_attr(regs->bl);
+        while (count) {
+            sercon_print_utf8(regs->al);
+            count--;
+        }
+        sercon_term_cursor_goto(cursor_pos_row(),
+                                cursor_pos_col());
+    }
+}
+
+/* Teletype output */
+static void sercon_100e(struct bregs *regs)
+{
+    switch (regs->al) {
+    case 7:
+        sercon_putchar(0x07);
+        break;
+    case 8:
+        sercon_lazy_backspace();
+        break;
+    case '\r':
+        sercon_lazy_cr();
+        break;
+    case '\n':
+        sercon_lazy_lf();
+        break;
+    default:
+        sercon_lazy_putchar(regs->al, 0, 1);
+        break;
+    }
+}
+
+/* Get current video mode */
+static void sercon_100f(struct bregs *regs)
+{
+    regs->al = GET_BDA(video_mode);
+    regs->ah = GET_BDA(video_cols);
+}
+
+/* VBE 2.0 */
+static void sercon_104f(struct bregs *regs)
+{
+    if (!sercon_splitmode()) {
+        regs->ax = 0x0100;
+    } else {
+        // Disable sercon entry point on any vesa modeset
+        if (regs->al == 0x00)
+            SET_LOW(sercon_enable, 0);
+    }
+}
+
+static void sercon_10XX(struct bregs *regs)
+{
+    warn_unimplemented(regs);
+}
+
+void VISIBLE16
+handle_sercon(struct bregs *regs)
+{
+    if (!CONFIG_SERCON)
+        return;
+    if (!GET_LOW(sercon_port))
+        return;
+
+    switch (regs->ah) {
+    case 0x01:
+    case 0x02:
+    case 0x03:
+    case 0x08:
+    case 0x0f:
+        if (sercon_splitmode())
+            /* nothing, vgabios handles it */
+            return;
+    }
+
+    switch (regs->ah) {
+    case 0x00: sercon_1000(regs); break;
+    case 0x01: sercon_1001(regs); break;
+    case 0x02: sercon_1002(regs); break;
+    case 0x03: sercon_1003(regs); break;
+    case 0x06: sercon_1006(regs); break;
+    case 0x08: sercon_1008(regs); break;
+    case 0x09: sercon_1009(regs); break;
+    case 0x0e: sercon_100e(regs); break;
+    case 0x0f: sercon_100f(regs); break;
+    case 0x4f: sercon_104f(regs); break;
+    default:   sercon_10XX(regs); break;
+    }
+}
+
+void sercon_setup(void)
+{
+    if (!CONFIG_SERCON)
+        return;
+
+    struct segoff_s seabios, vgabios;
+    u16 addr;
+
+    addr = romfile_loadint("etc/sercon-port", 0);
+    if (!addr)
+        return;
+    dprintf(1, "sercon: using ioport 0x%x\n", addr);
+
+    vgabios = GET_IVT(0x10);
+    seabios = FUNC16(entry_10);
+    if (vgabios.seg != seabios.seg ||
+        vgabios.offset != seabios.offset) {
+        dprintf(1, "sercon: configuring in splitmode (vgabios %04x:%04x)\n",
+                vgabios.seg, vgabios.offset);
+        sercon_real_vga_handler = vgabios;
+        SET_LOW(sercon_split, 1);
+    } else {
+        dprintf(1, "sercon: configuring as primary display\n");
+        sercon_real_vga_handler = seabios;
+    }
+
+    SET_IVT(0x10, FUNC16(entry_sercon));
+    SET_LOW(sercon_port, addr);
+    outb(0x03, addr + SEROFF_LCR); // 8N1
+    outb(0x01, addr + 0x02);       // enable fifo
+}
+
+/****************************************************************
+ * serial input
+ ****************************************************************/
+
+VARLOW u8 rx_buf[16];
+VARLOW u8 rx_bytes;
+
+static VAR16 struct {
+    char seq[4];
+    u8   len;
+    u16  keycode;
+} termseq[] = {
+    { .seq = "OP",   .len = 2, .keycode = 0x3b00 },    // F1
+    { .seq = "OQ",   .len = 2, .keycode = 0x3c00 },    // F2
+    { .seq = "OR",   .len = 2, .keycode = 0x3d00 },    // F3
+    { .seq = "OS",   .len = 2, .keycode = 0x3e00 },    // F4
+
+    { .seq = "[15~", .len = 4, .keycode = 0x3f00 },    // F5
+    { .seq = "[17~", .len = 4, .keycode = 0x4000 },    // F6
+    { .seq = "[18~", .len = 4, .keycode = 0x4100 },    // F7
+    { .seq = "[19~", .len = 4, .keycode = 0x4200 },    // F8
+    { .seq = "[20~", .len = 4, .keycode = 0x4300 },    // F9
+    { .seq = "[21~", .len = 4, .keycode = 0x4400 },    // F10
+    { .seq = "[23~", .len = 4, .keycode = 0x5700 },    // F11
+    { .seq = "[24~", .len = 4, .keycode = 0x5800 },    // F12
+
+    { .seq = "[2~",  .len = 3, .keycode = 0x52e0 },    // insert
+    { .seq = "[3~",  .len = 3, .keycode = 0x53e0 },    // delete
+    { .seq = "[5~",  .len = 3, .keycode = 0x49e0 },    // page up
+    { .seq = "[6~",  .len = 3, .keycode = 0x51e0 },    // page down
+
+    { .seq = "[A",   .len = 2, .keycode = 0x48e0 },    // up
+    { .seq = "[B",   .len = 2, .keycode = 0x50e0 },    // down
+    { .seq = "[C",   .len = 2, .keycode = 0x4de0 },    // right
+    { .seq = "[D",   .len = 2, .keycode = 0x4be0 },    // left
+
+    { .seq = "[H",   .len = 2, .keycode = 0x47e0 },    // home
+    { .seq = "[F",   .len = 2, .keycode = 0x4fe0 },    // end
+};
+
+static void shiftbuf(int remove)
+{
+    int i, remaining;
+
+    remaining = GET_LOW(rx_bytes) - remove;
+    SET_LOW(rx_bytes, remaining);
+    for (i = 0; i < remaining; i++)
+        SET_LOW(rx_buf[i], GET_LOW(rx_buf[i + remove]));
+}
+
+static int cmpbuf(int seq)
+{
+    int chr, len;
+
+    len = GET_GLOBAL(termseq[seq].len);
+    if (GET_LOW(rx_bytes) < len + 1)
+        return 0;
+    for (chr = 0; chr < len; chr++)
+        if (GET_GLOBAL(termseq[seq].seq[chr]) != GET_LOW(rx_buf[chr + 1]))
+            return 0;
+    return 1;
+}
+
+static int findseq(void)
+{
+    int seq;
+
+    for (seq = 0; seq < ARRAY_SIZE(termseq); seq++)
+        if (cmpbuf(seq))
+            return seq;
+    return -1;
+}
+
+void
+sercon_check_event(void)
+{
+    if (!CONFIG_SERCON)
+        return;
+
+    u16 addr = GET_LOW(sercon_port);
+    u16 keycode;
+    u8 byte, count = 0;
+    int seq, chr;
+
+    // check to see if there is a active serial port
+    if (!addr)
+        return;
+    if (inb(addr + SEROFF_LSR) == 0xFF)
+        return;
+
+    // flush pending output
+    sercon_lazy_flush();
+
+    // read all available data
+    while (inb(addr + SEROFF_LSR) & 0x01) {
+        byte = inb(addr + SEROFF_DATA);
+        if (GET_LOW(rx_bytes) < sizeof(rx_buf)) {
+            SET_LOW(rx_buf[rx_bytes], byte);
+            SET_LOW(rx_bytes, GET_LOW(rx_bytes) + 1);
+            count++;
+        }
+    }
+
+    for (;;) {
+        // no (more) input data
+        if (!GET_LOW(rx_bytes))
+            return;
+
+        // lookup escape sequences
+        if (GET_LOW(rx_bytes) > 1 && GET_LOW(rx_buf[0]) == 0x1b) {
+            seq = findseq();
+            if (seq >= 0) {
+                enqueue_key(GET_GLOBAL(termseq[seq].keycode));
+                shiftbuf(GET_GLOBAL(termseq[seq].len) + 1);
+                continue;
+            }
+        }
+
+        // Seems we got a escape sequence we didn't recognise.
+        //  -> If we received data wait for more, maybe it is just incomplete.
+        if (GET_LOW(rx_buf[0]) == 0x1b && count)
+            return;
+
+        // Handle input as individual char.
+        chr = GET_LOW(rx_buf[0]);
+        keycode = ascii_to_keycode(chr);
+        if (keycode)
+            enqueue_key(keycode);
+        shiftbuf(1);
+    }
+}
diff --git a/src/util.h b/src/util.h
index da9059a..7a23b51 100644
--- a/src/util.h
+++ b/src/util.h
@@ -231,6 +231,10 @@ void startBoot(void);
 void reloc_preinit(void *f, void *arg);
 void code_mutable_preinit(void);
 
+// sercon.c
+void sercon_setup(void);
+void sercon_check_event(void);
+
 // serial.c
 void serial_setup(void);
 void lpt_setup(void);