Age | Commit message (Collapse) | Author | Files | Lines |
|
iPXE decodes any percent-encoded characters during the URI parsing
stage, thereby allowing protocol implementations to consume the raw
field values directly without further decoding.
When reconstructing a URI string for use in an HTTP request line, the
percent-encoding is currently reapplied in a reversible way: we
guarantee that our reconstructed URI string could be decoded to give
the same raw field values.
This technically violates RFC3986, which states that "URIs that differ
in the replacement of a reserved character with its corresponding
percent-encoded octet are not equivalent". Experiments show that
several HTTP server applications will attach meaning to the choice of
whether or not a particular character was percent-encoded, even when
the percent-encoding is unnecessary from the perspective of parsing
the URI into its component fields.
Fix by storing the originally encoded substrings for the path, query,
and fragment fields and using these original encoded versions when
reconstructing a URI string. The path field is also stored as a
decoded string, for use by protocols such as TFTP that communicate
using raw strings rather than URI-encoded strings. All other fields
(such as the username and password) continue to be stored only in
their decoded versions since nothing ever needs to know the originally
encoded versions of these fields.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Some vendors provide a "system MAC address" within the DSDT/SSDT, to
be used to override the MAC address for a USB docking station.
A full implementation would require an ACPI bytecode interpreter,
since at least one OEM allows the MAC address to be constructed by
executable ACPI bytecode (rather than a fixed data structure).
We instead attempt to extract a plausible-looking "_AUXMAC_#.....#"
string that appears shortly after an "AMAC" or "MACA" signature. This
should work for most implementations encountered in practice.
Debugged-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Allow for the DSDT/SSDT signature-scanning and value extraction code
to be reused for extracting a pass-through MAC address.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Commit cd3de55 ("[efi] Record cached DHCPACK from loaded image's
device handle, if present") added the ability for a chainloaded UEFI
iPXE to reuse an IPv4 address and DHCP options previously obtained by
a built-in PXE stack, without needing to perform a second DHCP
request.
Extend this to also record the cached ProxyDHCPOFFER and PXEBSACK
obtained from the EFI_PXE_BASE_CODE_PROTOCOL instance installed on the
loaded image's device handle, if present.
This allows a chainloaded UEFI iPXE to reuse a boot filename or other
options that were provided via a ProxyDHCP or PXE boot server
mechanism, rather than by standard DHCP.
Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
RFC 3986 section 3.1 defines URI schemes as case-insensitive (though
the canonical form is always lowercase).
Use strcasecmp() rather than strcmp() to allow for case insensitivity
in URI schemes.
Requested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Reported-by: Bernhard M. Wiedemann <bwiedemann@suse.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Reported-by: Bernhard M. Wiedemann <bwiedemann@suse.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
iPXE will construct CPIO headers for images that have a non-empty
command line, thereby allowing raw images (without CPIO headers) to be
injected into a dynamically constructed initrd. This feature is
currently implemented within the BIOS-only bzImage format support.
Split out the CPIO header construction logic to allow for reuse in
other contexts such as in a UEFI build.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
An extracted image is wholly derived from the original archive image.
If the original archive image has been verified and marked as trusted,
then this trust logically extends to any image extracted from it.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Provide image_extract_exec() as a helper method to allow single-member
archive images (such as gzip compressed images) to be executed without
an explicit "imgextract" step.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Add the concept of extracting an image from an archive (which could be
a single-file archive such as a gzip-compressed file), along with an
"imgextract" command to expose this functionality to scripts.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The ACPI API currently expects platforms to provide access to a single
contiguous ACPI table. Some platforms (e.g. Linux userspace) do not
provide a convenient way to obtain the entire ACPI table, but do
provide access to individual tables.
All iPXE consumers of the ACPI API require access only to individual
tables.
Redefine the internal API to make acpi_find() an API method, with all
existing implementations delegating to the current RSDT-based
implementation.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The result from acpi_find_rsdt() is used only for the debug message.
Simplify the debug message and remove the otherwise redundant call to
acpi_find_rsdt().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Split out the portions of cachedhcp.c that can be shared between BIOS
and UEFI (both of which can provide a buffer containing a previously
obtained DHCP packet, and neither of which provide a means to
determine the length of this DHCP packet).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Consolidate the remaining logic common to initrd_init() and imgmem()
into a shared image_memory() function.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Extract part of the logic in initrd_init() to a standalone function
image_set_data().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Generalise the filter interface insertion logic from block_translate()
and expose as intf_insert(), allowing a filter interface to be
inserted on any existing interface.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Allow intf_plug() and intf_plug_plug() to be called safely on
interfaces that may be the null interface.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Some devices (e.g. xHCI USB host controllers) may require the use of
large areas of host memory for private use by the device. These
allocations cannot be satisfied from iPXE's limited heap space, and so
are currently allocated using umalloc() which will allocate external
system memory (and alter the system memory map as needed).
Provide dma_umalloc() to provide such allocations as part of the DMA
API, since there is otherwise no way to guarantee that the allocated
regions are usable for coherent DMA.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Include a potential DMA mapping within the definition of an I/O
buffer, and move all I/O buffer DMA mapping functions from dma.h to
iobuf.h. This avoids the need for drivers to maintain a separate list
of DMA mappings for each I/O buffer that they may handle.
Network device drivers typically do not keep track of transmit I/O
buffers, since the network device core already maintains a transmit
queue. Drivers will typically call netdev_tx_complete_next() to
complete a transmission without first obtaining the relevant I/O
buffer pointer (and will rely on the network device core automatically
cancelling any pending transmissions when the device is closed).
To allow this driver design approach to be retained, update the
netdev_tx_complete() family of functions to automatically perform the
DMA unmapping operation if required. For symmetry, also update the
netdev_rx() family of functions to behave the same way.
As a further convenience for drivers, allow the network device core to
automatically perform DMA mapping on the transmit datapath before
calling the driver's transmit() method. This avoids the need to
introduce a mapping error handling code path into the typically
error-free transmit methods.
With these changes, the modifications required to update a typical
network device driver to use the new DMA API are fairly minimal:
- Allocate and free descriptor rings and similar coherent structures
using dma_alloc()/dma_free() rather than malloc_phys()/free_phys()
- Allocate and free receive buffers using alloc_rx_iob()/free_rx_iob()
rather than alloc_iob()/free_iob()
- Calculate DMA addresses using dma() or iob_dma() rather than
virt_to_bus()
- Set a 64-bit DMA mask if needed using dma_set_mask_64bit() and
thereafter eliminate checks on DMA address ranges
- Either record the DMA device in netdev->dma, or call iob_map_tx() as
part of the transmit() method
- Ensure that debug messages use virt_to_phys() when displaying
"hardware" addresses
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Allow for dma_unmap() to be called by code other than the DMA device
driver itself.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Redefine the value stored within a DMA mapping to be the offset
between physical addresses and DMA addresses within the mapped region.
Provide a dma() wrapper function to calculate the DMA address for any
pointer within a mapped region, thereby simplifying the use cases when
a device needs to be given addresses other than the region start
address.
On a platform using the "flat" DMA implementation the DMA offset for
any mapped region is always zero, with the result that dma_map() can
be optimised away completely and dma() reduces to a straightforward
call to virt_to_phys().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
iPXE currently assumes that DMA-capable devices can directly address
physical memory using host addresses. This assumption fails when
using an IOMMU.
Define an internal DMA API with two implementations: a "flat"
implementation for use in legacy BIOS or other environments in which
flat physical addressing is guaranteed to be used and all allocated
physical addresses are guaranteed to be within a 32-bit address space,
and an "operations-based" implementation for use in UEFI or other
environments in which DMA mapping may require bus-specific handling.
The purpose of the fully inlined "flat" implementation is to allow the
trivial identity DMA mappings to be optimised out at build time,
thereby avoiding an increase in code size for legacy BIOS builds.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The malloc_dma() function allocates memory with specified physical
alignment, and is typically (though not exclusively) used to allocate
memory for DMA.
Rename to malloc_phys() to more closely match the functionality, and
to create name space for functions that specifically allocate and map
DMA-capable buffers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Fix memcmp() to return proper standard positive/negative values for
unequal comparisons. Current implementation is backwards (i.e. the
functions are returning negative when should be positive and
vice-versa).
Currently most consumers of these functions only check the return value
for ==0 or !=0 and so we can safely change the implementation without
breaking things.
However, there is one call that checks the polarity of this function,
and that is prf_sha1() for wireless WPA 4-way handshake. Due to the
incorrect memcmp() polarity, the WPA handshake creates an incorrect
PTK, and the handshake would fail after step 2. Undoubtedly, the AP
noticed the supplicant failed the mic check. This commit fixes that
issue.
Similar to commit 3946aa9 ("[libc] Fix strcmp()/strncmp() to return
proper values").
Signed-off-by: Michael Bazzinotti <bazz@bazz1.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
All implemented socket openers provide definitions for both IPv4 and
IPv6 using exactly the same opener method. Simplify the logic by
omitting the address family from the definition.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The URI parsing code for "host[:port]" checks that the final character
is not ']' in order to allow for IPv6 literals. If the entire
"host[:port]" portion of the URL is an empty string, then this will
access the preceding character. This does not result in accessing
invalid memory (since the string is guaranteed by construction to
always have a preceding character) and does not result in incorrect
behaviour (since if the string is empty then strrchr() is guaranteed
to return NULL), but it does make the code confusing to read.
Fix by inverting the order of the two tests.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The Raspberry Pi NIC has no EEPROM to hold the MAC address. The
platform firmware (e.g. UEFI or U-Boot) will typically obtain the MAC
address from the VideoCore firmware and add it to the device tree,
which is then made available to subsequent programs such as iPXE or
the Linux kernel.
Add the ability to parse a flattened device tree and to extract the
MAC address.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Fix strcmp() and strncmp() to return proper standard positive/negative
values for unequal strings. Current implementation is backwards
(i.e. the functions are returning negative when should be positive and
vice-versa).
Currently all consumers of these functions only check the return value
for ==0 or !=0 and so we can safely change the implementation without
breaking things.
Signed-off-by: Aaron Young <Aaron.Young@oracle.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Limit the profile sample count to INT_MAX to avoid both signed
overflow and a potential division by zero when updating the stored
mean value.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Allow a NetBIOS domain name to be specified within a URL using a
syntax such as:
http://domain%5Cusername:password@server/path
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Checking for job progress is essentially a user interface activity,
and can safely be performed only once per timer tick (as is already
done with checking for keypresses).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Calling discard_cache() is likely to result in a call to
free_memblock(), which will call valgrind_make_blocks_noaccess()
before returning. This causes valgrind to report an invalid read on
the next iteration through the loop in alloc_memblock().
Fix by explicitly calling valgrind_make_blocks_defined() after
discard_cache() returns. Also call valgrind_make_blocks_noaccess()
before calling discard_cache(), to guard against free list corruption
while executing cache discarders.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Reported-by: Christian Nilsson <nikize@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Allow values to be read from ACPI tables using the syntax
${acpi/<signature>.<index>.0.<offset>.<length>}
where <signature> is the ACPI table signature as a 32-bit hexadecimal
number (e.g. 0x41504093 for the 'APIC' signature on the MADT), <index>
is the index into the array of tables matching this signature,
<offset> is the byte offset within the table, and <length> is the
field length in bytes.
Numeric values are returned in reverse byte order, since ACPI numeric
values are usually little-endian.
For example:
${acpi/0x41504943.0.0.0.0} - entire MADT table in raw hex
${acpi/0x41504943.0.0.0x0a.6:string} - MADT table OEM ID
${acpi/0x41504943.0.0.0x24.4:uint32} - local APIC address
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
When performing a SAN boot via INT 13, there is no way for the
operating system to indicate that it has finished using the INT 13 SAN
device. We therefore have no opportunity to clean up state before the
loaded operating system's native drivers take over. This can cause
problems when booting Windows, which tends not to be forgiving of
unexpected system state.
Windows will typically write a flag to the SAN device as the last
action before transferring control to the native drivers. We can use
this as a heuristic to bring the system to a quiescent state (without
performing a full shutdown); this provides us an opportunity to
temporarily clean up state that could otherwise prevent a successful
Windows boot.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|