| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When running on a system with an ACPI-provided system-specific MAC
address, iPXE will apply this address to an ECM or NCM USB NIC. If
iPXE has been chainloaded from a previous stage that does not
understand the ACPI MAC mechanism then this can result in iPXE using a
different MAC address than the previous stage, which is surprising to
users.
Attempt to minimise surprise by allowing the MAC address found in a
cached DHCPACK packet to override a temporary MAC address, if the
DHCPACK MAC address matches the network device's permanent MAC
address. When a previous stage has chosen to use the network device's
permanent MAC address (e.g. because it does not understand the ACPI
MAC mechanism), this will cause iPXE to make the same choice.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
When applying an ACPI-provided system-specific MAC address, apply it
to netdev->ll_addr rather than netdev->hw_addr. This allows iPXE
scripts to access the permanent MAC address via the ${netX/hwaddr}
setting (and thereby provides scripts with a mechanism to ascertain
that the NIC is using a MAC address other than its own permanent
hardware address).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Some newer HP products expose the host-based MAC (HBMAC) address using
an ACPI method named "RTMA" returning a part-binary string of the form
"_RTXMAC_#<mac>#", where "<mac>" comprises the raw MAC address bytes.
Extend the existing support to handle this format alongside the older
"_AUXMAC_" format (which uses a base16-encoded MAC address).
Reported-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
For symmetry with the stub user_to_phys() implementation, provide
phys_to_user() with the same underlying assumption that virtual
addresses are physical (since there is no way to know the real
physical address when running as a Linux userspace executable).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Allow for linked-in code to override the mechanism used to locate an
ACPI table, thereby opening up the possibility of ACPI self-tests.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Extend the glyph cache to include a number of dynamic entries that are
populated on demand whenever a non-ASCII character needs to be drawn.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Accumulate UTF-8 characters in fbcon_putchar(), and require the frame
buffer console's .glyph() method to accept Unicode character values.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
We currently define the active DNS server as a global variable. All
queries will start by attempting to contact the active DNS server, and
the active DNS server will be changed only if we fail to get a
response. This effectively treats the DNS server list as expressing a
weak preference ordering: we will try servers in order, but once we
have found a working server we will stick with that server for as long
as it continues to respond to queries.
Some sites are misconfigured to hand out DNS servers that do not have
a consistent worldview. For example: the site may hand out two DNS
server addresses, the first being an internal DNS server (which is
able to resolve names in private DNS domains) and the second being a
public DNS server such as 8.8.8.8 (which will correctly return
NXDOMAIN for any private DNS domains). This type of configuration is
fundamentally broken and should never be used, since any DNS resolver
performing a query for a name within a private DNS domain may obtain a
spurious NXDOMAIN response for a valid private DNS name.
Work around these broken configurations by treating the DNS server
list as expressing a strong preference ordering, and always starting
DNS queries from the first server in the list (rather than maintaining
a global concept of the active server). This will have the debatable
benefit of converting permanent spurious NXDOMAIN errors into
transient spurious NXDOMAIN errors, which can at least be worked
around at a higher level (e.g. by retrying a download in a loop within
an iPXE script).
The cost of always starting DNS queries from the first server in the
list is a slight delay introduced when the first server is genuinely
unavailable. This should be negligible in practice since DNS queries
are relatively infrequent and the failover expiry time is short.
Treating the DNS server list as a preference ordering is permitted by
the language of RFC 2132, which defines DHCP option 6 as a list in
which "[DNS] servers SHOULD be listed in order of preference". No
specification defines a precise algorithm for how this preference
order should be applied in practice: this new approach seems as good
as any.
Requested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The BIOS console's interpretation of LShift+RShift as equivalent to
AltGr requires the shifted ASCII characters to be present in the AltGr
mapping table, to allow AltGr-Shift-<key> to be interpreted in the
same way as AltGr-<key>.
For keyboard layouts that have different ASCII characters for
AltGr-<key> and AltGr-Shift-<key>, this will potentially leave the
character for AltGr-<key> inaccessible via the BIOS console if the
BIOS requires the use of the LShift+RShift workaround. This
theoretically affects the numeric keys in the Lithuanian ("lt")
keyboard layout (where the numerals are accessed via AltGr-<key> and
punctuation characters via AltGr-Shift-<key>), but the simple
workaround for that keyboard layout is to avoid using AltGr and Shift
entirely since the unmodified numeric keys are not remapped anyway.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Provide the special keyboard map named "dynamic" which allows the
active keyboard map to be selected at runtime via the ${keymap}
setting, e.g.:
#define KEYBOARD_MAP dynamic
iPXE> set keymap uk
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Settings applicators are entirely independent, and there is no reason
why a failure in one applicator should prevent other applicators from
being processed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
As reported by Coverity, xsmp_rx_xve_modify() currently passes a
partially initialised struct ib_address_vector to xve_update_tca() and
thence to eoib_set_gateway(), which uses memcpy() to store the whole
structure including the (unused and unneeded) uninitialised fields.
Silence the Coverity warning by zeroing the whole structure.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
As per the general pattern for initialisation functions in iPXE,
pci_init() saves code size by assuming that the caller has already
zeroed the underlying storage (e.g. as part of zeroing a larger
containing structure). There are several places within the code where
pci_init() is deliberately used to initialise a transient struct
pci_device without zeroing the entire structure, because the calling
code knows that only the PCI bus:dev.fn address is required to be
initialised (e.g. when reading from PCI configuration space).
Ensure that using pci_init() followed by pci_read_config() will fully
initialise the struct pci_device even if the caller did not previously
zero the underlying storage, since Coverity reports that there are
several places in the code that rely upon this.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Embedded images do not have an associated URI. This currently causes
the current working URI (cwuri) to be cleared when starting an
embedded image.
If the current working URI has been set via a ${next-server} setting
from a cached DHCP packet then this will result in unexpected
behaviour. An attempt by the embedded script to use a relative URI to
download files from the TFTP server will fail with the error:
Could not start download: Operation not supported (ipxe.org/3c092083)
Rerunning the "dhcp" command will not fix this error, since the TFTP
settings applicator will not see any change to the ${next-server}
setting and so will not reset the current working URI.
Fix by setting the current working URI to the image's URI only if the
image actually has an associated URI.
Debugged-by: Ignat Korchagin <ignat@cloudflare.com>
Originally-fixed-by: Ignat Korchagin <ignat@cloudflare.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The AltGr remapping table is constructed to include only keys that are
not reachable after applying the basic remapping table. The logic
currently fails to include keys that are omitted entirely from the
basic remapping table since they would map to a non-ASCII character.
Fix this logic by allowing the remapping tables to include null
mappings, which are then elided only at the point of constructing the
C code fragment.
Reported-by: Christian Nilsson <nikize@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The build process currently invokes the Python genkeymap.py script via
the Perl executable. Strangely, this appears to work.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The "az" keymap has several unreachable ASCII characters, with no
obvious closest equivalent keys.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Treat dead keys in target keymaps as producing the closest equivalent
ASCII character, since many of these characters are otherwise
unrepresented on the keyboard.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Several keyboard layouts define ASCII characters as accessible only
via the AltGr modifier. Add support for this modifier to ensure that
all ASCII characters are accessible.
Experiments suggest that the BIOS console is likely to fail to
generate ASCII characters when the AltGr key is pressed. Work around
this limitation by accepting LShift+RShift (which will definitely
produce an ASCII character) as a synonym for AltGr.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Handle Ctrl and CapsLock key modifiers within key_remap(), to provide
consistent behaviour across different console types.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Separate the concept of a keyboard mapping from a list of remapped
keys, to allow for the possibility of supporting multiple keyboard
mappings at runtime.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The compound statement expression within __table_entries() prevents
the use of top-level declarations such as
static struct thing *things = table_start ( THINGS );
Define TABLE_START() and TABLE_END() macros that can be used as:
static TABLE_START ( things_start, THINGS );
static struct thing *things = things_start;
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The key with scancode 86 appears in the position between left shift
and Z on a US keyboard, where it typically fails to exist entirely.
Most US keyboard maps define this nonexistent key as generating "\|",
with the notable exception of "loadkeys" which instead reports it as
generating "<>". Both of these mapping choices duplicate keys that
exist elsewhere in the map, which causes problems for our ASCII-based
remapping mechanism.
Work around these quirks by treating the key as generating "\|" with
the high bit set, and making it subject to remapping. Where the BIOS
generates "\|" as expected, this allows us to remap to the correct
ASCII value.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Rewrite genkeymap.pl in Python with added sanity checks, and update
the list of keyboard mappings to remove those no longer supported by
the underlying "loadkeys" tool.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Some keyboard layouts (e.g. "fr") swap letter and punctuation keys.
Apply the logic for upper and lower case and for Ctrl-<key> only after
applying remapping, in order to handle these layouts correctly.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
To minimise code size, our keyboard mapping works on the basis of
allowing the BIOS to convert the keyboard scancode into an ASCII
character and then remapping the ASCII character.
This causes problems with keyboard layouts such as "fr" that swap the
shifted and unshifted digit keys, since the ASCII-based remapping will
spuriously remap the numeric keypad (which produces the same ASCII
values as the digit keys).
Fix by checking that the keyboard scancode is within the range of keys
that vary between keyboard mappings before attempting to remap the
ASCII character.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Allow the keyboard remapping functionality to be exposed to consoles
other than the BIOS console.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
AArch64 kernels tend to be distributed as gzip compressed images.
Enable IMAGE_GZIP by default for AArch64 to avoid the need for
uncompressed images to be provided.
Originally-implemented-by: Alessandro Di Stefano <aleskandro@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
In real mode, code segments are always writable. In protected mode,
code segments can never be writable. The precise implementation of
this attribute differs between CPU generations, with subtly different
behaviour arising on the transitions from protected mode to real mode.
At the point of transition (when the PE bit is cleared in CR0) the
hidden portion of the %cs descriptor will retain whatever attributes
were in place for the protected-mode code segment, including the fact
that the segment is not writable. The immediately following code will
perform a far control flow transfer (such as ljmp or lret) in order to
load a real-mode value into %cs.
On the Pentium and later CPUs, the retained protected-mode attributes
will be ignored for any accesses via %cs while the CPU is in real
mode. A write via %cs will therefore be allowed even though the
hidden portion of the %cs descriptor still describes a non-writable
segment.
On the 486 and earlier CPUs, the retained protected-mode attributes
will not be ignored for accesses via %cs. A write via %cs will
therefore cause a CPU fault. To obtain normal real-mode behaviour
(i.e. a writable %cs descriptor), special logic is added to the ljmp
instruction that populates the hidden portion of the %cs descriptor
with real-mode attributes when a far jump is executed in real mode.
The result is that writes via %cs will cause a CPU fault until the
first ljmp instruction is executed, after which writes via %cs will be
allowed as expected in real mode.
The transition code in libprefix.S currently uses lret to load a
real-mode value into %cs after clearing the PE bit. Experimentation
shows that only the ljmp instruction will work to load real-mode
attributes into the hidden portion of the %cs descriptor: other far
control flow transfers (such as lret, lcall, or int) do not do so.
When running on a 486 or earlier CPU, this results in code within
libprefix.S running with a non-writable code segment after a mode
transition, which in turn results in a CPU fault when real-mode code
in liba20.S attempts to write to %cs:enable_a20_method.
Fix by constructing and executing an ljmp instruction, to trigger the
relevant descriptor population logic on 486 and earlier CPUs. This
ljmp instruction is constructed on the stack, since the .prefix
section may be executing directly from ROM (or from memory that the
BIOS has write-protected in order to emulate an ISA ROM region) and so
cannot be modified.
Reported-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Attempt to fetch the autoexec.ipxe script via TFTP using the PXE base
code protocol installed on the loaded image's device handle, if
present.
This provides a generic alternative to the use of an embedded script
for chainloaded binaries, which is particularly useful in a UEFI
Secure Boot environment since it allows the script to be modified
without the need to sign a new binary.
As a side effect, this also provides a third method for breaking the
PXE chainloading loop (as an alternative to requiring an embedded
script or custom DHCP server configuration).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
RFC3986 allows for colons to appear within the path component of a
relative URI, but iPXE will currently parse such URIs incorrectly by
interpreting the text before the colon as the URI scheme.
Fix by checking for valid characters when identifying the URI scheme.
Deliberately deviate from the RFC3986 definition of valid characters
by accepting "_" (which was incorrectly used in the iPXE-specific
"ib_srp" URI scheme and so must be accepted for compatibility with
existing deployments), and by omitting the code to check for
characters that are not used in any URI scheme supported by iPXE.
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
SBAT defines an encoding for security generation numbers stored as a
CSV file within a special ".sbat" section in the signed binary. If a
Secure Boot exploit is discovered then the generation number will be
incremented alongside the corresponding fix.
Platforms may then record the minimum generation number required for
any given product. This allows for an efficient revocation mechanism
that consumes minimal flash storage space (in contrast to the DBX
mechanism, which allows for only a single-digit number of revocation
events to ever take place across all possible signed binaries).
Add SBAT metadata to iPXE EFI binaries to support this mechanism.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
As of commit f1e9e2b ("[efi] Align EFI image sections by page size"),
the VirtualSize fields for the .reloc and .debug sections have been
rounded up to the (4kB) image alignment. This breaks the PE
relocation logic in the UEFI shim, which requires the VirtualSize
field to exactly match the size as recorded in the data directory.
Fix by setting the VirtualSize field to the unaligned size of the
section, as is already done for normal PE sections (i.e. those other
than .reloc and .debug).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The RFC4122 specification defines UUIDs as being in network byte
order, but an unfortunately significant amount of (mostly Microsoft)
software treats them as having the first three fields in little-endian
byte order.
In an ideal world, any server-side software that compares UUIDs for
equality would perform an endian-insensitive comparison (analogous to
comparing strings for equality using a case-insensitive comparison),
and would therefore not care about byte order differences.
Define a setting type name ":guid" to allow a UUID setting to be
formatted in little-endian order, to simplify interoperability with
server-side software that expects such a formatting.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
The UEFI specification mandates that the EFI watchdog timer should be
disabled by the platform firmware as part of the ExitBootServices()
call, but some platforms (e.g. Hyper-V) are observed to occasionally
forget to do so, resulting in a reboot approximately five minutes
after starting the operating system.
Work around these firmware bugs by disabling the watchdog timer
ourselves.
Requested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
