diff options
| -rw-r--r-- | src/include/ipxe/efi/Protocol/Ip4Config2.h | 318 | ||||
| -rw-r--r-- | src/include/ipxe/efi/efi.h | 1 | ||||
| -rw-r--r-- | src/interface/efi/efi_debug.c | 2 | ||||
| -rw-r--r-- | src/interface/efi/efi_guid.c | 5 |
4 files changed, 326 insertions, 0 deletions
diff --git a/src/include/ipxe/efi/Protocol/Ip4Config2.h b/src/include/ipxe/efi/Protocol/Ip4Config2.h new file mode 100644 index 0000000..ca091de --- /dev/null +++ b/src/include/ipxe/efi/Protocol/Ip4Config2.h @@ -0,0 +1,318 @@ +/** @file + This file provides a definition of the EFI IPv4 Configuration II + Protocol. + +Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR> +SPDX-License-Identifier: BSD-2-Clause-Patent + +@par Revision Reference: +This Protocol is introduced in UEFI Specification 2.5 + +**/ + +#ifndef __EFI_IP4CONFIG2_PROTOCOL_H__ +#define __EFI_IP4CONFIG2_PROTOCOL_H__ + +FILE_LICENCE ( BSD2_PATENT ); + +#include <ipxe/efi/Protocol/Ip4.h> + +#define EFI_IP4_CONFIG2_PROTOCOL_GUID \ + { \ + 0x5b446ed1, 0xe30b, 0x4faa, {0x87, 0x1a, 0x36, 0x54, 0xec, 0xa3, 0x60, 0x80 } \ + } + +typedef struct _EFI_IP4_CONFIG2_PROTOCOL EFI_IP4_CONFIG2_PROTOCOL; + +/// +/// EFI_IP4_CONFIG2_DATA_TYPE +/// +typedef enum { + /// + /// The interface information of the communication device this EFI + /// IPv4 Configuration II Protocol instance manages. This type of + /// data is read only. The corresponding Data is of type + /// EFI_IP4_CONFIG2_INTERFACE_INFO. + /// + Ip4Config2DataTypeInterfaceInfo, + /// + /// The general configuration policy for the EFI IPv4 network stack + /// running on the communication device this EFI IPv4 + /// Configuration II Protocol instance manages. The policy will + /// affect other configuration settings. The corresponding Data is of + /// type EFI_IP4_CONFIG2_POLICY. + /// + Ip4Config2DataTypePolicy, + /// + /// The station addresses set manually for the EFI IPv4 network + /// stack. It is only configurable when the policy is + /// Ip4Config2PolicyStatic. The corresponding Data is of + /// type EFI_IP4_CONFIG2_MANUAL_ADDRESS. When DataSize + /// is 0 and Data is NULL, the existing configuration is cleared + /// from the EFI IPv4 Configuration II Protocol instance. + /// + Ip4Config2DataTypeManualAddress, + /// + /// The gateway addresses set manually for the EFI IPv4 network + /// stack running on the communication device this EFI IPv4 + /// Configuration II Protocol manages. It is not configurable when + /// the policy is Ip4Config2PolicyDhcp. The gateway + /// addresses must be unicast IPv4 addresses. The corresponding + /// Data is a pointer to an array of EFI_IPv4_ADDRESS instances. + /// When DataSize is 0 and Data is NULL, the existing configuration + /// is cleared from the EFI IPv4 Configuration II Protocol instance. + /// + Ip4Config2DataTypeGateway, + /// + /// The DNS server list for the EFI IPv4 network stack running on + /// the communication device this EFI IPv4 Configuration II + /// Protocol manages. It is not configurable when the policy is + /// Ip4Config2PolicyDhcp. The DNS server addresses must be + /// unicast IPv4 addresses. The corresponding Data is a pointer to + /// an array of EFI_IPv4_ADDRESS instances. When DataSize + /// is 0 and Data is NULL, the existing configuration is cleared + /// from the EFI IPv4 Configuration II Protocol instance. + /// + Ip4Config2DataTypeDnsServer, + Ip4Config2DataTypeMaximum +} EFI_IP4_CONFIG2_DATA_TYPE; + +/// +/// EFI_IP4_CONFIG2_INTERFACE_INFO related definitions +/// +#define EFI_IP4_CONFIG2_INTERFACE_INFO_NAME_SIZE 32 + +/// +/// EFI_IP4_CONFIG2_INTERFACE_INFO +/// +typedef struct { + /// + /// The name of the interface. It is a NULL-terminated Unicode string. + /// + CHAR16 Name[EFI_IP4_CONFIG2_INTERFACE_INFO_NAME_SIZE]; + /// + /// The interface type of the network interface. See RFC 1700, + /// section "Number Hardware Type". + /// + UINT8 IfType; + /// + /// The size, in bytes, of the network interface's hardware address. + /// + UINT32 HwAddressSize; + /// + /// The hardware address for the network interface. + /// + EFI_MAC_ADDRESS HwAddress; + /// + /// The station IPv4 address of this EFI IPv4 network stack. + /// + EFI_IPv4_ADDRESS StationAddress; + /// + /// The subnet address mask that is associated with the station address. + /// + EFI_IPv4_ADDRESS SubnetMask; + /// + /// Size of the following RouteTable, in bytes. May be zero. + /// + UINT32 RouteTableSize; + /// + /// The route table of the IPv4 network stack runs on this interface. + /// Set to NULL if RouteTableSize is zero. Type EFI_IP4_ROUTE_TABLE is defined in + /// EFI_IP4_PROTOCOL.GetModeData(). + /// + EFI_IP4_ROUTE_TABLE *RouteTable OPTIONAL; +} EFI_IP4_CONFIG2_INTERFACE_INFO; + +/// +/// EFI_IP4_CONFIG2_POLICY +/// +typedef enum { + /// + /// Under this policy, the Ip4Config2DataTypeManualAddress, + /// Ip4Config2DataTypeGateway and Ip4Config2DataTypeDnsServer configuration + /// data are required to be set manually. The EFI IPv4 Protocol will get all + /// required configuration such as IPv4 address, subnet mask and + /// gateway settings from the EFI IPv4 Configuration II protocol. + /// + Ip4Config2PolicyStatic, + /// + /// Under this policy, the Ip4Config2DataTypeManualAddress, + /// Ip4Config2DataTypeGateway and Ip4Config2DataTypeDnsServer configuration data are + /// not allowed to set via SetData(). All of these configurations are retrieved from DHCP + /// server or other auto-configuration mechanism. + /// + Ip4Config2PolicyDhcp, + Ip4Config2PolicyMax +} EFI_IP4_CONFIG2_POLICY; + +/// +/// EFI_IP4_CONFIG2_MANUAL_ADDRESS +/// +typedef struct { + /// + /// The IPv4 unicast address. + /// + EFI_IPv4_ADDRESS Address; + /// + /// The subnet mask. + /// + EFI_IPv4_ADDRESS SubnetMask; +} EFI_IP4_CONFIG2_MANUAL_ADDRESS; + +/** + Set the configuration for the EFI IPv4 network stack running on the communication device this EFI + IPv4 Configuration II Protocol instance manages. + + This function is used to set the configuration data of type DataType for the EFI IPv4 network stack + running on the communication device this EFI IPv4 Configuration II Protocol instance manages. + The successfully configured data is valid after system reset or power-off. + The DataSize is used to calculate the count of structure instances in the Data for some + DataType that multiple structure instances are allowed. + This function is always non-blocking. When setting some typeof configuration data, an + asynchronous process is invoked to check the correctness of the data, such as doing address conflict + detection on the manually set local IPv4 address. EFI_NOT_READY is returned immediately to + indicate that such an asynchronous process is invoked and the process is not finished yet. The caller + willing to get the result of the asynchronous process is required to call RegisterDataNotify() + to register an event on the specified configuration data. Once the event is signaled, the caller can call + GetData()to get back the configuration data in order to know the result. For other types of + configuration data that do not require an asynchronous configuration process, the result of the + operation is immediately returned. + + @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance. + @param[in] DataType The type of data to set. + @param[in] DataSize Size of the buffer pointed to by Data in bytes. + @param[in] Data The data buffer to set. The type ofthe data buffer is associated + with the DataType. + + @retval EFI_SUCCESS The specified configuration data for the EFI IPv4 network stack is set + successfully. + @retval EFI_INVALID_PARAMETER One or more of the following are TRUE: + This is NULL. + One or more fields in Data and DataSize do not match the + requirement of the data type indicated by DataType. + @retval EFI_WRITE_PROTECTED The specified configuration data is read-only or the specified configuration + data can not be set under the current policy. + @retval EFI_ACCESS_DENIED Another set operation on the specified configuration data is already in process. + @retval EFI_NOT_READY An asynchronous process is invoked to set the specified configuration data and + the process is not finished yet. + @retval EFI_BAD_BUFFER_SIZE The DataSize does not match the size of the type indicated by DataType. + @retval EFI_UNSUPPORTED This DataType is not supported. + @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. + @retval EFI_DEVICE_ERROR An unexpected system error or network error occurred. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_IP4_CONFIG2_SET_DATA)( + IN EFI_IP4_CONFIG2_PROTOCOL *This, + IN EFI_IP4_CONFIG2_DATA_TYPE DataType, + IN UINTN DataSize, + IN VOID *Data + ); + +/** + Get the configuration data for the EFI IPv4 network stack running on the communication device this + EFI IPv4 Configuration II Protocol instance manages. + + This function returns the configuration data of type DataType for the EFI IPv4 network stack + running on the communication device this EFI IPv4 Configuration II Protocol instance manages. + The caller is responsible for allocating the buffer usedto return the specified configuration data and + the required size will be returned to the caller if the size of the buffer is too small. + EFI_NOT_READY is returned if the specified configuration data is not ready due to an already in + progress asynchronous configuration process. The caller can call RegisterDataNotify() to + register an event on the specified configuration data. Once the asynchronous configuration process is + finished, the event will be signaled and a subsequent GetData() call will return the specified + configuration data. + + @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance. + @param[in] DataType The type of data to get. + @param[out] DataSize On input, in bytes, the size of Data. On output, in bytes, the size + of buffer required to store the specified configuration data. + @param[in] Data The data buffer in which the configuration data is returned. The + type of the data buffer is associated with the DataType. Ignored + if DataSize is 0. + + @retval EFI_SUCCESS The specified configuration data is got successfully. + @retval EFI_INVALID_PARAMETER One or more of the followings are TRUE: + This is NULL. + DataSize is NULL. + Data is NULL if *DataSizeis not zero. + @retval EFI_BUFFER_TOO_SMALL The size of Data is too small for the specified configuration data + and the required size is returned in DataSize. + @retval EFI_NOT_READY The specified configuration data is not ready due to an already in + progress asynchronous configuration process. + @retval EFI_NOT_FOUND The specified configuration data is not found. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_IP4_CONFIG2_GET_DATA)( + IN EFI_IP4_CONFIG2_PROTOCOL *This, + IN EFI_IP4_CONFIG2_DATA_TYPE DataType, + IN OUT UINTN *DataSize, + IN VOID *Data OPTIONAL + ); + +/** + Register an event that is to be signaled whenever a configuration process on the specified + configuration data is done. + + This function registers an event that is to be signaled whenever a configuration process on the + specified configuration data is done. An event can be registered for different DataType + simultaneously and the caller is responsible for determining which type of configuration data causes + the signaling of the event in such case. + + @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance. + @param[in] DataType The type of data to unregister the event for. + @param[in] Event The event to register. + + @retval EFI_SUCCESS The notification event for the specified configuration data is + registered. + @retval EFI_INVALID_PARAMETER This is NULL or Event is NULL. + @retval EFI_UNSUPPORTED The configuration data type specified by DataType is not supported. + @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. + @retval EFI_ACCESS_DENIED The Event is already registered for the DataType. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_IP4_CONFIG2_REGISTER_NOTIFY)( + IN EFI_IP4_CONFIG2_PROTOCOL *This, + IN EFI_IP4_CONFIG2_DATA_TYPE DataType, + IN EFI_EVENT Event + ); + +/** + Remove a previously registered event for the specified configuration data. + + This function removes a previously registeredevent for the specified configuration data. + + @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance. + @param[in] DataType The type of data to remove the previously registered event for. + @param[in] Event The event to unregister. + + @retval EFI_SUCCESS The event registered for the specified configuration data is removed. + @retval EFI_INVALID_PARAMETER This is NULL or Event is NULL. + @retval EFI_NOT_FOUND The Eventhas not been registered for the specified DataType. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_IP4_CONFIG2_UNREGISTER_NOTIFY)( + IN EFI_IP4_CONFIG2_PROTOCOL *This, + IN EFI_IP4_CONFIG2_DATA_TYPE DataType, + IN EFI_EVENT Event + ); + +/// +/// The EFI_IP4_CONFIG2_PROTOCOL is designed to be the central repository for the common +/// configurations and the administrator configurable settings for the EFI IPv4 network stack. +/// An EFI IPv4 Configuration II Protocol instance will be installed on each communication device that +/// the EFI IPv4 network stack runs on. +/// +struct _EFI_IP4_CONFIG2_PROTOCOL { + EFI_IP4_CONFIG2_SET_DATA SetData; + EFI_IP4_CONFIG2_GET_DATA GetData; + EFI_IP4_CONFIG2_REGISTER_NOTIFY RegisterDataNotify; + EFI_IP4_CONFIG2_UNREGISTER_NOTIFY UnregisterDataNotify; +}; + +extern EFI_GUID gEfiIp4Config2ProtocolGuid; + +#endif diff --git a/src/include/ipxe/efi/efi.h b/src/include/ipxe/efi/efi.h index 0d90fbb..86a3c2f 100644 --- a/src/include/ipxe/efi/efi.h +++ b/src/include/ipxe/efi/efi.h @@ -193,6 +193,7 @@ extern EFI_GUID efi_hii_config_access_protocol_guid; extern EFI_GUID efi_hii_font_protocol_guid; extern EFI_GUID efi_ip4_protocol_guid; extern EFI_GUID efi_ip4_config_protocol_guid; +extern EFI_GUID efi_ip4_config2_protocol_guid; extern EFI_GUID efi_ip4_service_binding_protocol_guid; extern EFI_GUID efi_ip6_protocol_guid; extern EFI_GUID efi_ip6_config_protocol_guid; diff --git a/src/interface/efi/efi_debug.c b/src/interface/efi/efi_debug.c index 8922fa2..dec6b6e 100644 --- a/src/interface/efi/efi_debug.c +++ b/src/interface/efi/efi_debug.c @@ -115,6 +115,8 @@ static struct efi_well_known_guid efi_well_known_guids[] = { "Ip4" }, { &efi_ip4_config_protocol_guid, "Ip4Config" }, + { &efi_ip4_config2_protocol_guid, + "Ip4Config2" }, { &efi_ip4_service_binding_protocol_guid, "Ip4Sb" }, { &efi_ip6_protocol_guid, diff --git a/src/interface/efi/efi_guid.c b/src/interface/efi/efi_guid.c index b9f8e15..4a76bda 100644 --- a/src/interface/efi/efi_guid.c +++ b/src/interface/efi/efi_guid.c @@ -45,6 +45,7 @@ FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL ); #include <ipxe/efi/Protocol/HiiFont.h> #include <ipxe/efi/Protocol/Ip4.h> #include <ipxe/efi/Protocol/Ip4Config.h> +#include <ipxe/efi/Protocol/Ip4Config2.h> #include <ipxe/efi/Protocol/Ip6.h> #include <ipxe/efi/Protocol/Ip6Config.h> #include <ipxe/efi/Protocol/LoadFile.h> @@ -182,6 +183,10 @@ EFI_GUID efi_ip4_protocol_guid EFI_GUID efi_ip4_config_protocol_guid = EFI_IP4_CONFIG_PROTOCOL_GUID; +/** IPv4 configuration 2 protocol GUID */ +EFI_GUID efi_ip4_config2_protocol_guid + = EFI_IP4_CONFIG2_PROTOCOL_GUID; + /** IPv4 service binding protocol GUID */ EFI_GUID efi_ip4_service_binding_protocol_guid = EFI_IP4_SERVICE_BINDING_PROTOCOL_GUID; |