# Building BoringSSL ## Checking out BoringSSL git clone "https://boringssl.googlesource.com/boringssl" ## Build Prerequisites The standalone CMake build is primarily intended for developers. If embedding BoringSSL into another project with a pre-existing build system, see [INCORPORATING.md](./INCORPORATING.md). Unless otherwise noted, build tools must at most five years old, matching [Abseil guidelines](https://abseil.io/about/compatibility). If in doubt, use the most recent stable version of each tool. * [CMake](https://cmake.org/download/) 3.12 or later is required. * Building with [Ninja](https://ninja-build.org/) instead of Make is recommended, because it makes builds faster. On Windows, CMake's Visual Studio generator may also work, but it not tested regularly and requires recent versions of CMake for assembly support. * On Windows only, [NASM](https://www.nasm.us/) is required. If not found by CMake, it may be configured explicitly by setting `CMAKE_ASM_NASM_COMPILER`. * Compilers for C11 and C++14, or later, are required. On Windows, MSVC from Visual Studio 2019 or later with Windows 10 SDK 2104 or later are supported, but using the latest versions is recommended. Recent versions of GCC (6.1+) and Clang should work on non-Windows platforms, and maybe on Windows too. ## Building Using Ninja (note the 'N' is capitalized in the cmake invocation): cmake -GNinja -B build ninja -C build Using Make (does not work on Windows): cmake -B build make -C build This produces a debug build by default. Optimisation isn't enabled, and debug assertions are included. Pass `-DCMAKE_BUILD_TYPE=Release` to `cmake` to configure a release build: cmake -GNinja -B build -DCMAKE_BUILD_TYPE=Release ninja -C build If you want to cross-compile then there is an example toolchain file for 32-bit Intel in `util/`. Wipe out the build directory, run `cmake` like this: cmake -B build -DCMAKE_TOOLCHAIN_FILE=../util/32-bit-toolchain.cmake -GNinja If you want to build as a shared library, pass `-DBUILD_SHARED_LIBS=1`. On Windows, where functions need to be tagged with `dllimport` when coming from a shared library, define `BORINGSSL_SHARED_LIBRARY` in any code which `#include`s the BoringSSL headers. In order to serve environments where code-size is important as well as those where performance is the overriding concern, `OPENSSL_SMALL` can be defined to remove some code that is especially large. See [CMake's documentation](https://cmake.org/cmake/help/v3.4/manual/cmake-variables.7.html) for other variables which may be used to configure the build. You usually don't need to run `cmake` again after changing `CMakeLists.txt` files because the build scripts will detect changes to them and rebuild themselves automatically. ### Building for Android It's possible to build BoringSSL with the Android NDK using CMake. Recent versions of the NDK include a CMake toolchain file which works with CMake 3.6.0 or later. This has been tested with version r16b of the NDK. Unpack the Android NDK somewhere and export `ANDROID_NDK` to point to the directory. Then run CMake like this: cmake -DANDROID_ABI=armeabi-v7a \ -DANDROID_PLATFORM=android-19 \ -DCMAKE_TOOLCHAIN_FILE=${ANDROID_NDK}/build/cmake/android.toolchain.cmake \ -GNinja -B build Once you've run that, Ninja should produce Android-compatible binaries. You can replace `armeabi-v7a` in the above with `arm64-v8a` and use API level 21 or higher to build aarch64 binaries. For other options, see the documentation in the toolchain file. To debug the resulting binaries on an Android device with `gdb`, run the commands below. Replace `ARCH` with the architecture of the target device, e.g. `arm` or `arm64`. adb push ${ANDROID_NDK}/prebuilt/android-ARCH/gdbserver/gdbserver \ /data/local/tmp adb forward tcp:5039 tcp:5039 adb shell /data/local/tmp/gdbserver :5039 /path/on/device/to/binary Then run the following in a separate shell. Replace `HOST` with the OS and architecture of the host machine, e.g. `linux-x86_64`. ${ANDROID_NDK}/prebuilt/HOST/bin/gdb target remote :5039 # in gdb ### Building for iOS To build for iOS, pass `-DCMAKE_OSX_SYSROOT=iphoneos` and `-DCMAKE_OSX_ARCHITECTURES=ARCH` to CMake, where `ARCH` is the desired architecture, matching values used in the `-arch` flag in Apple's toolchain. Passing multiple architectures for a multiple-architecture build is not supported. ### Building with Prefixed Symbols BoringSSL's build system has experimental support for adding a custom prefix to all symbols. This can be useful when linking multiple versions of BoringSSL in the same project to avoid symbol conflicts. Symbol prefixing requires the most recent stable version of [Go](https://go.dev/). In order to build with prefixed symbols, the `BORINGSSL_PREFIX` CMake variable should specify the prefix to add to all symbols, and the `BORINGSSL_PREFIX_SYMBOLS` CMake variable should specify the path to a file which contains a list of symbols which should be prefixed (one per line; comments are supported with `#`). In other words, `cmake -B build -DBORINGSSL_PREFIX=MY_CUSTOM_PREFIX -DBORINGSSL_PREFIX_SYMBOLS=/path/to/symbols.txt` will configure the build to add the prefix `MY_CUSTOM_PREFIX` to all of the symbols listed in `/path/to/symbols.txt`. It is currently the caller's responsibility to create and maintain the list of symbols to be prefixed. Alternatively, `util/read_symbols.go` reads the list of exported symbols from a `.a` file, and can be used in a build script to generate the symbol list on the fly (by building without prefixing, using `read_symbols.go` to construct a symbol list, and then building again with prefixing). This mechanism is under development and may change over time. Please contact the BoringSSL maintainers if making use of it. ## Known Limitations on Windows * CMake can generate Visual Studio projects, but the generated project files don't have steps for assembling the assembly language source files, so they currently cannot be used to build BoringSSL. ## ARM CPU Capabilities ARM, unlike Intel, does not have a userspace instruction that allows applications to discover the capabilities of the processor. Instead, the capability information has to be provided by a combination of compile-time information and the operating system. BoringSSL determines capabilities at compile-time based on `__ARM_NEON`, `__ARM_FEATURE_AES`, and other preprocessor symbols defined in [Arm C Language Extensions (ACLE)](https://developer.arm.com/architectures/system-architectures/software-standards/acle). These values are usually controlled by the `-march` flag. You can also define any of the following to enable the corresponding ARM feature, but using the ACLE symbols via `-march` is recommended. * `OPENSSL_STATIC_ARMCAP_NEON` * `OPENSSL_STATIC_ARMCAP_AES` * `OPENSSL_STATIC_ARMCAP_SHA1` * `OPENSSL_STATIC_ARMCAP_SHA256` * `OPENSSL_STATIC_ARMCAP_PMULL` The resulting binary will assume all such features are always present. This can reduce code size, by allowing the compiler to omit fallbacks. However, if the feature is not actually supported at runtime, BoringSSL will likely crash. BoringSSL will additionally query the operating system at runtime for additional features, e.g. with `getauxval` on Linux. This allows a single binary to use newer instructions when present, but still function on CPUs without them. But some environments don't support runtime queries. If building for those, define `OPENSSL_STATIC_ARMCAP` to limit BoringSSL to compile-time capabilities. If not defined, the target operating system must be known to BoringSSL. ## Binary Size The implementations of some algorithms require a trade-off between binary size and performance. For instance, BoringSSL's fastest P-256 implementation uses a 148 KiB pre-computed table. To optimize instead for binary size, pass `-DOPENSSL_SMALL=1` to CMake or define the `OPENSSL_SMALL` preprocessor symbol. # Running Tests There are two additional dependencies for running tests: * The most recent stable version of [Go](https://go.dev/) is required. Note Go is exempt from the five year support window. If not found by CMake, the go executable may be configured explicitly by setting `GO_EXECUTABLE`. * On x86_64 Linux, the tests have an optional [libunwind](https://www.nongnu.org/libunwind/) dependency to test the assembly more thoroughly. There are two sets of tests: the C/C++ tests and the blackbox tests. For former are built by Ninja and can be run from the top-level directory with `go run util/all_tests.go`. The latter have to be run separately by running `go test` from within `ssl/test/runner`. Both sets of tests may also be run with `ninja -C build run_tests`, but CMake 3.2 or later is required to avoid Ninja's output buffering. # Pre-generated Files If modifying perlasm files, or `util/pregenerate/build.json`, you will need to run `go run ./util/pregenerate` to refresh some pre-generated files. To do this, you will need a recent version of Perl. On Windows, [Active State Perl](http://www.activestate.com/activeperl/) has been reported to work, as has MSYS Perl. [Strawberry Perl](http://strawberryperl.com/) also works but it adds GCC to `PATH`, which can confuse some build tools when identifying the compiler (removing `C:\Strawberry\c\bin` from `PATH` should resolve any problems). See (gen/README.md)[./gen/README.md] for more details.