| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As it turns out branch hints grew as kind of a misconception. In
addition their interpretation by GNU assembler is affected by
assembler flags and can end up with opposite meaning on different
processors. As we have to loose quite a lot on misinterprerations,
especially on newer processors, we just omit them altogether.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Since NDEBUG is defined unconditionally on command line for release
builds, we can omit *_DEBUG options in favour of effective "all-on"
in debug builds exercised though CI.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
This removes all scripts that deal with MINFO as well, since that's
only used by mk1mf.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The reason to do so is that some of the generators detect PIC flags
like -fPIC and -KPIC, and those are normally delivered in LD_CFLAGS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Some of these scripts would recognise an output parameter if it looks
like a file path. That works both in both the classic and new build
schemes. Some fo these scripts would only recognise it if it's a
basename (i.e. no directory component). Those need to be corrected,
as the output parameter in the new build scheme is more likely to
contain a directory component than not.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
A few were missed in the previous commit.
Closes RT#4412
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Closes RT#4406
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Before the 'Introduce the "pic" / "no-pic" config option' commit, the
shared_cflag value for the chosen config would be part of the make
variable CFLAG, which got replicated into CFLAGS and ASFLAGS.
Since said commit, the shared_cflag value has become a make variable
of its own, SHARED_CFLAG (which is left empty in a "no-pic" build).
However, ASFLAGS was forgotten. That's what's corrected with this
change.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
This gets rid of the BEGINRAW..ENDRAW sections in crypto/aes/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Make all scripts produce .S, make interpretation of $(CFLAGS)
pre-processor's responsibility, start accepting $(PERLASM_SCHEME).
[$(PERLASM_SCHEME) is redundant in this case, because there are
no deviataions between Solaris and Linux assemblers. This is
purely to unify .pl->.S handling across all targets.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
This takes us away from the idea that we know exactly how our static
libraries are going to get used. Instead, we make them available to
build shareable things with, be it other shared libraries or DSOs.
On the other hand, we also have greater control of when the shared
library cflags. They will never be used with object files meant got
binaries, such as apps/openssl or test/test*.
With unified, we take this a bit further and prepare for having to
deal with extra cflags specifically to be used with DSOs (dynamic
engines), libraries and binaries (applications).
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
All those flags existed because we had all the dependencies versioned
in the repository, and wanted to have it be consistent, no matter what
the local configuration was. Now that the dependencies are gone from
the versioned Makefile.ins, it makes much more sense to use the exact
same flags as when compiling the object files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
It seems that on some platforms, the perlasm scripts call the C
compiler for certain checks. These scripts need the environment
variable CC to have the C compiler command.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
This also adds all the raw sections needed for some files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Now that we have the foundation for the "unified" build scheme in
place, we add build.info files. They have been generated from the
Makefiles in the same directories. Things that are platform specific
will appear in later commits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Also remove depend/local_depend.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Remove lint, tags, dclean, tests.
This is prep for a new makedepend scheme.
This is temporary pending unified makefile, and might help it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Create Makefile's from Makefile.in
Rename Makefile.org to Makefile.in
Rename Makefiles to Makefile.in
Address review feedback from Viktor and Richard
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Since we don't use the eay style any more, there's no point tryint to
tell emacs to use it.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
RT#4171
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
and engage it in most modules.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
RT#4142
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
It was also found that stich performs suboptimally on AMD Jaguar, hence
execution is limited to XOP-capable and Intel processors.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
As some of ARM processors, more specifically Cortex-Mx series, are
Thumb2-only, we need to support Thumb2-only builds even in assembly.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Especially since after the #ifdef cleanups this is not useful.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
This leaves behind files with names ending with '.iso-8859-1'. These
should be safe to remove. If something went wrong when re-encoding,
there will be some files with names ending with '.utf8' left behind.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in. This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.
This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
There are header files in crypto/ that are used by a number of crypto/
submodules. Move those to crypto/include/internal and adapt the
affected source code and Makefiles.
The header files that got moved are:
crypto/cryptolib.h
crypto/md32_common.h
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
assembler.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
This addresses
- request for improvement for faster key setup in RT#3576;
- clearing registers and stack in RT#3554 (this is more of a gesture to
see if there will be some traction from compiler side);
- more commentary around input parameters handling and stack layout
(desired when RT#3553 was reviewed);
- minor size and single block performance optimization (was lying around);
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
ARM has optimized Cortex-A5x pipeline to favour pairs of complementary
AES instructions. While modified code improves performance of post-r0p0
Cortex-A53 performance by >40% (for CBC decrypt and CTR), it hurts
original r0p0. We favour later revisions, because one can't prevent
future from coming. Improvement on post-r0p0 Cortex-A57 exceeds 50%,
while new code is not slower on r0p0, or Apple A7 for that matter.
[Update even SHA results for latest Cortex-A53.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
With no more symlinks, there's no need for those variables, or the links
target. This also goes for all install: and uninstall: targets that do
nothing but copy $(EXHEADER) files, since that's now taken care of by the
top Makefile.
Also, removed METHTEST from test/Makefile. It looks like an old test that's
forgotten...
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Rather than making include/openssl/foo.h a symlink to
crypto/foo/foo.h, this change moves the file to include/openssl/foo.h
once and for all.
Likewise, move crypto/foo/footest.c to test/footest.c, instead of
symlinking it there.
Originally-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Td4 and Te4 are arrays of u8. A u8 << int promotes the u8 to an int first then shifts.
If the mathematical result of a shift (as modelled by lhs * 2^{rhs}) is not representable
in an integer, behaviour is undefined. In other words, you can't shift into the sign bit
of a signed integer. Fix this by casting to u32 whenever we're shifting left by 24.
(For consistency, cast other shifts, too.)
Caught by -fsanitize=shift
Submitted by Nick Lewycky (Google)
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
